<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ArticleSet PUBLIC "-//NLM//DTD PubMed 2.7//EN" "https://dtd.nlm.nih.gov/ncbi/pubmed/in/PubMed.dtd">
<ArticleSet>
<Article>
<Journal>
				<PublisherName>Semnan University Press</PublisherName>
				<JournalTitle>Mechanics of Advanced Composite Structures</JournalTitle>
				<Issn>2423-4826</Issn>
				<Volume></Volume>
				<Issue>Articles in Press</Issue>
				<PubDate PubStatus="epublish">
					<Year>2026</Year>
					<Month>09</Month>
					<Day>03</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Performance Evaluation of Epoxy-Based Smart Composite with Integrated Touch Sensor</ArticleTitle>
<VernacularTitle></VernacularTitle>
			<FirstPage></FirstPage>
			<LastPage></LastPage>
			<ELocationID EIdType="pii">10940</ELocationID>
			
<ELocationID EIdType="doi">10.22075/macs.2026.41298.2005</ELocationID>
			
			<Language>EN</Language>
<AuthorList>
<Author>
					<FirstName>Mohan Kumar</FirstName>
					<LastName>T S</LastName>
<Affiliation>Industrial Engineering and Management, Siddaganga Institute of Technology, Tumakuru, Karnataka, India</Affiliation>
<Identifier Source="ORCID">0000-0001-8586-2838</Identifier>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2026</Year>
					<Month>05</Month>
					<Day>21</Day>
				</PubDate>
			</History>
		    <Abstract>Composite materials provide mechanical and electrical stability across diverse environmental conditions, thereby enhancing sensor durability. This study aims to fabricate novel epoxy-embedded capacitive touch sensors, Type A (Touch sensor embedded) and Type B (embedded sensor with wire loop) configurations, and test them experimentally and compare their electrical and functional characteristics. Electrical characteristics are tested using neat epoxy as a reference, and the results indicate that the progressive decrease in resistivity from pure epoxy to Type B clearly demonstrates the role of sensor configuration in enhancing electrical performance. The functional characteristics were tested based on sensing behaviors and long-term durability. The results indicate that Type A exhibits enhanced touch sensitivity, with greater capacitance variation (ΔC) and a shorter response time. Type B provides better electrical stability and dielectric damping, resulting in increased SNR (signal-to-noise ratio), enhanced repeatability, more effective resistance to noise, and lower hysteresis. Frequency-dependent dielectrics showed consistent permittivity behavior, with capacitance variations decreasing at higher frequencies. Response time and ΔC varied significantly, according to the two-sample t-tests (p &lt; 0.05). For long-term aging and error analysis, less variation in measurement (less than 6%) and a coefficient of variation of around 2% were observed.</Abstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">smart composite</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Capacitive Touch Sensors</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Capacitance variation</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Sensitivity</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://macs.semnan.ac.ir/article_10940_4f3fcf17644bb65a1732f02d6f10034a.pdf</ArchiveCopySource>
</Article>
</ArticleSet>
