Author Index

A

  • Abdi, Hamid Parametric Investigation of Particle Movements in Ultrasonic Levitation Process Using Piezoelectric Materials [Volume 13, Issue 2, 2026, Pages 357-369]
  • Abdollahi, Amir Experimental Investigation of Residual Stress Measurement on Cold Roll Bonded Al/Cu Composite by Incremental Hole-Drilling Method [Volume 13, Issue 1, 2026, Pages 1-11]
  • Abdullah, Orhan Sabah Investigation of Mechanical Properties for Blend Epoxy-Polysulfide Reinforced with Woven Carbon and Glass Fiber [Volume 13, Issue 1, 2026, Pages 185-195]
  • Abdulpari, Saiyathibrahim Hybrid Polymer Composite Tensile Strength Estimation Using K-Nearest Neighboring Classification Algorithm [Volume 13, Issue 2, 2026, Pages 319-338]
  • Achyuth, Penda Enhancement of Mechanical Properties of Coir, Kapok, and Hemp Fiber-Reinforced Epoxy Composites for a Variety of Applications [Volume 13, Issue 2, 2026, Pages 271-281]
  • Afshin, Shadi Study on Thermal, Mechanical and Dynamic Properties of Epoxy Matrix with Hybrid of ‎Nanoclay/Carbon Nanotube [Volume 13, Issue 1, 2026, Pages 37-56]
  • Ahlawat, Neha Vibration Analysis of FGM Annular Plate with Linearly Varying Thickness for Several Boundary Conditions [Volume 13, Issue 2, 2026, Pages 475-494]
  • Alamdari, Sanaz Nanocomposite Thin Film of KTP Nanoparticles: Synthesis, Characterization and Optical Applications [Volume 13, Issue 2, 2026, Pages 465-473]
  • Ammouchi, Nesrine Development of a Composite Material Based on a Polymer and Plant Fibers [Volume 13, Issue 2, 2026, Pages 391-399]
  • Amoochi, Abbas Parametric Investigation of Particle Movements in Ultrasonic Levitation Process Using Piezoelectric Materials [Volume 13, Issue 2, 2026, Pages 357-369]
  • Arani, Rajendra Prasad Mechanical Testing of Novel and Conventional Geopolymer Brick Dried under Passive Solar Dryer with Ferric Chloride Dihydrate as Phase Change Material [Volume 13, Issue 1, 2026, Pages 23-35]
  • Aswalekar, Uday Mechanical and Tribological Characterization of Eco-Friendly Brake Pads Using Banana Peel Powder as a Sustainable Friction Material [Volume 13, Issue 2, 2026, Pages 427-437]
  • Auradi, Virupaxi Reinforcement Surface Modification Effect on the Microstructure, Mechanical, and Tensile Fractography of Al2219 Alloy B4C Composites [Volume 13, Issue 1, 2026, Pages 197-210]

B

  • Bafandeh Haghighi, Shadan Experimental Analysis of the Effect of Mechanical Topology on the Surface of Biological Microgripper Made of Ionic-Polymer Metal Composite Smart Material [Volume 13, Issue 1, 2026, Pages 143-156]
  • Bangalore Chandrashekar, Nidhi Performance Evaluation of Epoxy-Based Natural Composites Reinforced with Flax and Flax-Ramie Fiber [Volume 13, Issue 1, 2026, Pages 13-22]
  • Bellili, Nadira Development of a Composite Material Based on a Polymer and Plant Fibers [Volume 13, Issue 2, 2026, Pages 391-399]
  • Boulkesrane, Chems El Douha Development of a Composite Material Based on a Polymer and Plant Fibers [Volume 13, Issue 2, 2026, Pages 391-399]

C

  • Chandrashekar, Rajarathnam Effect of Nickel Addition on the Coefficient of Thermal Expansion and Microstructural Characteristics of AA2024 and AA7175 Aluminum Alloys in As-Cast and Homogenized States [Volume 13, Issue 1, 2026, Pages 97-116]
  • Charerntanom, Wissanu Characterization of Physical and Mechanical Properties, and Morphology of Wood Composites Derived from Milk Bottles and Teak Sawdust Powder [Volume 13, Issue 2, 2026, Pages 259-269]
  • Chumsamrong, Pranee Biodegradation, Mechanical and Physical Properties of Poly(butylene succinate) and Natural Rubber Compound Blend Filled with Activated Carbon from Coconut Fruit [Volume 13, Issue 1, 2026, Pages 157-169]
  • Cinquemani, Simone Parametric Investigation of Particle Movements in Ultrasonic Levitation Process Using Piezoelectric Materials [Volume 13, Issue 2, 2026, Pages 357-369]

D

  • Dairi, Badrina Development of a Composite Material Based on a Polymer and Plant Fibers [Volume 13, Issue 2, 2026, Pages 391-399]
  • Dairi, Nassima Development of a Composite Material Based on a Polymer and Plant Fibers [Volume 13, Issue 2, 2026, Pages 391-399]
  • Datar, Gajanan Shravan Modeling and Experimental Validation of Carbon Fiber-Kevlar Honeycomb Core Sandwich Structure [Volume 13, Issue 1, 2026, Pages 69-82]
  • Dehghani, Davood Parametric Investigation of Particle Movements in Ultrasonic Levitation Process Using Piezoelectric Materials [Volume 13, Issue 2, 2026, Pages 357-369]
  • Deshpande, Neeta Hybrid Polymer Composite Tensile Strength Estimation Using K-Nearest Neighboring Classification Algorithm [Volume 13, Issue 2, 2026, Pages 319-338]

F

  • Fereidoon, Abdolhosein Applying an Artificial Neural Network to Predict the Mechanical Properties of Epoxy Resin with Graphite Additive After Water Absorption [Volume 13, Issue 1, 2026, Pages 245-257]

G

  • Ganiger, Subhashchandra Reinforcement Surface Modification Effect on the Microstructure, Mechanical, and Tensile Fractography of Al2219 Alloy B4C Composites [Volume 13, Issue 1, 2026, Pages 197-210]
  • Gharibshahian, Elaheh Nanocomposite Thin Film of KTP Nanoparticles: Synthesis, Characterization and Optical Applications [Volume 13, Issue 2, 2026, Pages 465-473]
  • Ghasemi, Ahmad Reza Statistical Analysis of Delamination Effect on Natural Frequency of Composite Laminated Plate [Volume 13, Issue 1, 2026, Pages 129-142]
  • Ghasemi, Mohammad Improving Prediction of Compressive Strength of Rectangular/Square (R/S) FRP-Confined Concrete Using Machine Learning [Volume 13, Issue 2, 2026, Pages 283-304]
  • Ghasemi Ghalebahman, Ahmad Evaluation of the Effect of polyethylene/SMR20 Hybrid Nanocomposites Reinforced with Basalt Fibers and Graphene using RSM [Volume 13, Issue 2, 2026, Pages 401-414]
  • Ghorbani, Saeed Enhancing Mechanical Properties of Polypropylene Composites Reinforced with Date Palm Fiber Using Maleic Anhydride Grafted Polypropylene as a Compatibilizer [Volume 13, Issue 1, 2026, Pages 211-226]
  • Govindan Radhakrishnan, Gopinath Mechanical Testing of Novel and Conventional Geopolymer Brick Dried under Passive Solar Dryer with Ferric Chloride Dihydrate as Phase Change Material [Volume 13, Issue 1, 2026, Pages 23-35]
  • Govindhan Radhakrishnan, Rajesh Kanna Mechanical Testing of Novel and Conventional Geopolymer Brick Dried under Passive Solar Dryer with Ferric Chloride Dihydrate as Phase Change Material [Volume 13, Issue 1, 2026, Pages 23-35]
  • Gupta, Sneha Strength Behavior of Soft Soil Treated with Municipal Solid Waste Incineration Ash and Nano Zeolite [Volume 13, Issue 2, 2026, Pages 305-317]

H

  • Hamza, Waleed Hamed Investigation of Mechanical Properties for Blend Epoxy-Polysulfide Reinforced with Woven Carbon and Glass Fiber [Volume 13, Issue 1, 2026, Pages 185-195]
  • Heydari, Mahmoud Influence of Hydroxyl-Terminated Polybutadiene (HTPB) on the Mechanical and Electrical Properties of Epoxy Phenol Novolac Resin [Volume 13, Issue 2, 2026, Pages 381-390]
  • Honarpisheh, Mohammad Experimental Investigation of Residual Stress Measurement on Cold Roll Bonded Al/Cu Composite by Incremental Hole-Drilling Method [Volume 13, Issue 1, 2026, Pages 1-11]
  • Hoseinpour Gollo, Mohammad Investigating the Effective Factors for Enhancing the Optimization of Al6061/8Al2O3-3WC-8SiC Composite Using the Friction Stir Process [Volume 13, Issue 2, 2026, Pages 371-379]

J

  • Jabbari, Ali Parametric Investigation of Particle Movements in Ultrasonic Levitation Process Using Piezoelectric Materials [Volume 13, Issue 2, 2026, Pages 357-369]
  • Jafar Tafreshi, Majid Nanocomposite Thin Film of KTP Nanoparticles: Synthesis, Characterization and Optical Applications [Volume 13, Issue 2, 2026, Pages 465-473]
  • Jatti, Vijaykumar Shivashankar Hybrid Polymer Composite Tensile Strength Estimation Using K-Nearest Neighboring Classification Algorithm [Volume 13, Issue 2, 2026, Pages 319-338]
  • Jeevan, Ashok Kumar Jeevan Mechanical Testing of Novel and Conventional Geopolymer Brick Dried under Passive Solar Dryer with Ferric Chloride Dihydrate as Phase Change Material [Volume 13, Issue 1, 2026, Pages 23-35]
  • Jena, Hemalata Dielectric and Thermal Behaviour Analysis of Epoxy Composites Filled with Date Seed Particles Using Finite Element Method [Volume 13, Issue 2, 2026, Pages 347-355]
  • John, Jerold John Britto Influence of Process Parameters on the Mechanical Properties of Carbon Fibre Reinforced PETG [Volume 13, Issue 1, 2026, Pages 171-184]

K

  • Karagaiah, Naveen Kumar Bannuru Reinforcement Surface Modification Effect on the Microstructure, Mechanical, and Tensile Fractography of Al2219 Alloy B4C Composites [Volume 13, Issue 1, 2026, Pages 197-210]
  • Karuppiah, Balaji Hybrid Polymer Composite Tensile Strength Estimation Using K-Nearest Neighboring Classification Algorithm [Volume 13, Issue 2, 2026, Pages 319-338]
  • Khirkhahan, Saeed Nanocomposite Thin Film of KTP Nanoparticles: Synthesis, Characterization and Optical Applications [Volume 13, Issue 2, 2026, Pages 465-473]
  • Kukanur, Vijayendra Reinforcement Surface Modification Effect on the Microstructure, Mechanical, and Tensile Fractography of Al2219 Alloy B4C Composites [Volume 13, Issue 1, 2026, Pages 197-210]
  • Kumar, Anil Modeling and Experimental Validation of Carbon Fiber-Kevlar Honeycomb Core Sandwich Structure [Volume 13, Issue 1, 2026, Pages 69-82]
  • Kumar, Halkur Siddagangaiah Reinforcement Surface Modification Effect on the Microstructure, Mechanical, and Tensile Fractography of Al2219 Alloy B4C Composites [Volume 13, Issue 1, 2026, Pages 197-210]
  • Kumar, Saurabh Strength Behavior of Soft Soil Treated with Municipal Solid Waste Incineration Ash and Nano Zeolite [Volume 13, Issue 2, 2026, Pages 305-317]
  • Kumar, Sekaran Sathees Enhancement of Mechanical Properties of Coir, Kapok, and Hemp Fiber-Reinforced Epoxy Composites for a Variety of Applications [Volume 13, Issue 2, 2026, Pages 271-281]
  • Kumaraswamy, Jayappa Microstructure Study and Optimization of Hardness and Tensile Strength of AW2024/B4Cp Reinforced Composites Through Linear Regression [Volume 13, Issue 1, 2026, Pages 83-96]

L

  • Lakshminarayana, Bharath Microstructure Study and Optimization of Hardness and Tensile Strength of AW2024/B4Cp Reinforced Composites Through Linear Regression [Volume 13, Issue 1, 2026, Pages 83-96]
  • Lashgari, Hossein Investigating the Effective Factors for Enhancing the Optimization of Al6061/8Al2O3-3WC-8SiC Composite Using the Friction Stir Process [Volume 13, Issue 2, 2026, Pages 371-379]
  • Lokantara, I Putu Optimizing Mahogany Peel Powder-Polyester Composites for Sustainable Automotive Interior Panels: Effects of Filler Content on Mechanical and Thermal Properties [Volume 13, Issue 2, 2026, Pages 439-450]

M

  • Madeva, Nagaral Effect of Nickel Addition on the Coefficient of Thermal Expansion and Microstructural Characteristics of AA2024 and AA7175 Aluminum Alloys in As-Cast and Homogenized States [Volume 13, Issue 1, 2026, Pages 97-116]
  • Mahmood, Ibtihal Abdulrazak Investigation of Mechanical Properties for Blend Epoxy-Polysulfide Reinforced with Woven Carbon and Glass Fiber [Volume 13, Issue 1, 2026, Pages 185-195]
  • Malgol, Amit Mechanical and Tribological Characterization of Eco-Friendly Brake Pads Using Banana Peel Powder as a Sustainable Friction Material [Volume 13, Issue 2, 2026, Pages 427-437]
  • Mallik, Sadek Hossain State Space Approach to Moore-Gibson-Thompson Generalized Piezo-Thermoelasticity with Memory-Dependent Derivative [Volume 13, Issue 2, 2026, Pages 451-463]
  • Mazdak, Siamak Parametric Investigation of Particle Movements in Ultrasonic Levitation Process Using Piezoelectric Materials [Volume 13, Issue 2, 2026, Pages 357-369]
  • Mohammadimehr, Mehdi Experimental Investigation of Residual Stress Measurement on Cold Roll Bonded Al/Cu Composite by Incremental Hole-Drilling Method [Volume 13, Issue 1, 2026, Pages 1-11]
  • Mohanraju Raju, Sundarraju Effect of Nickel Addition on the Coefficient of Thermal Expansion and Microstructural Characteristics of AA2024 and AA7175 Aluminum Alloys in As-Cast and Homogenized States [Volume 13, Issue 1, 2026, Pages 97-116]
  • Molla, Mohammad Abul Kashim State Space Approach to Moore-Gibson-Thompson Generalized Piezo-Thermoelasticity with Memory-Dependent Derivative [Volume 13, Issue 2, 2026, Pages 451-463]
  • Momeni, Amir Investigating the Effective Factors for Enhancing the Optimization of Al6061/8Al2O3-3WC-8SiC Composite Using the Friction Stir Process [Volume 13, Issue 2, 2026, Pages 371-379]
  • Mondal, Nasiruddin State Space Approach to Moore-Gibson-Thompson Generalized Piezo-Thermoelasticity with Memory-Dependent Derivative [Volume 13, Issue 2, 2026, Pages 451-463]
  • Moodi, Yaser Improving Prediction of Compressive Strength of Rectangular/Square (R/S) FRP-Confined Concrete Using Machine Learning [Volume 13, Issue 2, 2026, Pages 283-304]
  • Mousavi, Seyed Rohollah Improving Prediction of Compressive Strength of Rectangular/Square (R/S) FRP-Confined Concrete Using Machine Learning [Volume 13, Issue 2, 2026, Pages 283-304]

N

  • Nagaral, Madeva Reinforcement Surface Modification Effect on the Microstructure, Mechanical, and Tensile Fractography of Al2219 Alloy B4C Composites [Volume 13, Issue 1, 2026, Pages 197-210]
  • Nalband, Fazil Reinforcement Surface Modification Effect on the Microstructure, Mechanical, and Tensile Fractography of Al2219 Alloy B4C Composites [Volume 13, Issue 1, 2026, Pages 197-210]
  • Namdev, Nagaraj Reinforcement Surface Modification Effect on the Microstructure, Mechanical, and Tensile Fractography of Al2219 Alloy B4C Composites [Volume 13, Issue 1, 2026, Pages 197-210]
  • Nasrollah, Amin Experimental Analysis of the Effect of Mechanical Topology on the Surface of Biological Microgripper Made of Ionic-Polymer Metal Composite Smart Material [Volume 13, Issue 1, 2026, Pages 143-156]
  • Nguyen, Van-Chinh A Finite Element Formulation for Analyzing the Nonlinear Static Response of Bi-functionally Graded Microbeam Resting on Elastic Foundation Under Various Loads [Volume 13, Issue 1, 2026, Pages 227-243]
  • Nouri Damghani, Mohammad Enhancing Mechanical Properties of Polypropylene Composites Reinforced with Date Palm Fiber Using Maleic Anhydride Grafted Polypropylene as a Compatibilizer [Volume 13, Issue 1, 2026, Pages 211-226]
  • Nouri Niyaraki, Ebrahim Evaluation of the Effect of polyethylene/SMR20 Hybrid Nanocomposites Reinforced with Basalt Fibers and Graphene using RSM [Volume 13, Issue 2, 2026, Pages 401-414]
  • Noyming, Sombut Biodegradation, Mechanical and Physical Properties of Poly(butylene succinate) and Natural Rubber Compound Blend Filled with Activated Carbon from Coconut Fruit [Volume 13, Issue 1, 2026, Pages 157-169]
  • Nuilek, Kanokon Characterization of Physical and Mechanical Properties, and Morphology of Wood Composites Derived from Milk Bottles and Teak Sawdust Powder [Volume 13, Issue 2, 2026, Pages 259-269]

O

  • Ouaoua, Lokmane Development of a Composite Material Based on a Polymer and Plant Fibers [Volume 13, Issue 2, 2026, Pages 391-399]

P

  • Pahlavani Bidgoli, Komeil Influence of Hydroxyl-Terminated Polybutadiene (HTPB) on the Mechanical and Electrical Properties of Epoxy Phenol Novolac Resin [Volume 13, Issue 2, 2026, Pages 381-390]
  • Pandian, Pitchipoo Influence of Process Parameters on the Mechanical Properties of Carbon Fibre Reinforced PETG [Volume 13, Issue 1, 2026, Pages 171-184]
  • Parvizi, Soroush Investigating the Effective Factors for Enhancing the Optimization of Al6061/8Al2O3-3WC-8SiC Composite Using the Friction Stir Process [Volume 13, Issue 2, 2026, Pages 371-379]
  • Pati, Pravat Ranjan Enhancement of Mechanical Properties of Coir, Kapok, and Hemp Fiber-Reinforced Epoxy Composites for a Variety of Applications [Volume 13, Issue 2, 2026, Pages 271-281]
  • Porwal, Rajesh Kumar Mechanical and Physical Properties Observations for Cu-Gr-SiC Composite Synthesized by Powder Metallurgy [Volume 13, Issue 2, 2026, Pages 339-345]
  • Pradhan, Priyabrat Dielectric and Thermal Behaviour Analysis of Epoxy Composites Filled with Date Seed Particles Using Finite Element Method [Volume 13, Issue 2, 2026, Pages 347-355]
  • Prasoetsopha, Natkrita Biodegradation, Mechanical and Physical Properties of Poly(butylene succinate) and Natural Rubber Compound Blend Filled with Activated Carbon from Coconut Fruit [Volume 13, Issue 1, 2026, Pages 157-169]
  • Prasoetsopha, Natkrita Characterization of Physical and Mechanical Properties, and Morphology of Wood Composites Derived from Milk Bottles and Teak Sawdust Powder [Volume 13, Issue 2, 2026, Pages 259-269]
  • Purohit, Abhilash Dielectric and Thermal Behaviour Analysis of Epoxy Composites Filled with Date Seed Particles Using Finite Element Method [Volume 13, Issue 2, 2026, Pages 347-355]

R

  • Raghav, Sapna Modeling and Experimental Validation of Carbon Fiber-Kevlar Honeycomb Core Sandwich Structure [Volume 13, Issue 1, 2026, Pages 69-82]
  • Rahimijonoush, Amirmasood Experimental Investigation of Residual Stress Measurement on Cold Roll Bonded Al/Cu Composite by Incremental Hole-Drilling Method [Volume 13, Issue 1, 2026, Pages 1-11]
  • Rahmanpour, Muhammadreza Evaluation of the Effect of polyethylene/SMR20 Hybrid Nanocomposites Reinforced with Basalt Fibers and Graphene using RSM [Volume 13, Issue 2, 2026, Pages 401-414]
  • Rajabi Delivand, Mohammad Hasan Investigating the Effective Factors for Enhancing the Optimization of Al6061/8Al2O3-3WC-8SiC Composite Using the Friction Stir Process [Volume 13, Issue 2, 2026, Pages 371-379]
  • Raja Murugan, Thavidan Vellaiyan Prediction and Parametric Effect in Drilling of Natural Fiber Laminate Using Combined Taguchi- Artificial Neural Network Approach [Volume 13, Issue 2, 2026, Pages 415-426]
  • Rajendra, Pagadaddinni Effect of Nickel Addition on the Coefficient of Thermal Expansion and Microstructural Characteristics of AA2024 and AA7175 Aluminum Alloys in As-Cast and Homogenized States [Volume 13, Issue 1, 2026, Pages 97-116]
  • Ramachandran, Prabhakaran Influence of Process Parameters on the Mechanical Properties of Carbon Fibre Reinforced PETG [Volume 13, Issue 1, 2026, Pages 171-184]
  • Ramamoorthi, Venkatesh Influence of Process Parameters on the Mechanical Properties of Carbon Fibre Reinforced PETG [Volume 13, Issue 1, 2026, Pages 171-184]
  • Ramesha, Channegowdana Doddy Madegowda Effect of Nickel Addition on the Coefficient of Thermal Expansion and Microstructural Characteristics of AA2024 and AA7175 Aluminum Alloys in As-Cast and Homogenized States [Volume 13, Issue 1, 2026, Pages 97-116]
  • Ranjitharamasamy, Sudhakara Pandian Mechanical Testing of Novel and Conventional Geopolymer Brick Dried under Passive Solar Dryer with Ferric Chloride Dihydrate as Phase Change Material [Volume 13, Issue 1, 2026, Pages 23-35]
  • Reddy, Matta Vishnu Jagadiswar Enhancement of Mechanical Properties of Coir, Kapok, and Hemp Fiber-Reinforced Epoxy Composites for a Variety of Applications [Volume 13, Issue 2, 2026, Pages 271-281]

S

  • Sadeghian, Mostafa Large Deflection Analysis of Graphene Sheets in the Thermal Environment Using Higher-Order Nonlocal Strain Gradient Principle [Volume 13, Issue 1, 2026, Pages 117-128]
  • Sahi, Samira Elaboration and Characterization of Waste Inked Paper-Poly (Vinyl Chloride) Composites: Effect of Paper Deinking [Volume 13, Issue 1, 2026, Pages 57-68]
  • Sahoo, Bibhuti Bhusan Dielectric and Thermal Behaviour Analysis of Epoxy Composites Filled with Date Seed Particles Using Finite Element Method [Volume 13, Issue 2, 2026, Pages 347-355]
  • Sai, Katuri Karthik Venkat Enhancement of Mechanical Properties of Coir, Kapok, and Hemp Fiber-Reinforced Epoxy Composites for a Variety of Applications [Volume 13, Issue 2, 2026, Pages 271-281]
  • Sakri, Mahadev Reinforcement Surface Modification Effect on the Microstructure, Mechanical, and Tensile Fractography of Al2219 Alloy B4C Composites [Volume 13, Issue 1, 2026, Pages 197-210]
  • Samanta, Lokanatha Dhall Dielectric and Thermal Behaviour Analysis of Epoxy Composites Filled with Date Seed Particles Using Finite Element Method [Volume 13, Issue 2, 2026, Pages 347-355]
  • Sari, Nasmi Herlina Optimizing Mahogany Peel Powder-Polyester Composites for Sustainable Automotive Interior Panels: Effects of Filler Content on Mechanical and Thermal Properties [Volume 13, Issue 2, 2026, Pages 439-450]
  • Sattanathan, Muthuvel Mechanical Testing of Novel and Conventional Geopolymer Brick Dried under Passive Solar Dryer with Ferric Chloride Dihydrate as Phase Change Material [Volume 13, Issue 1, 2026, Pages 23-35]
  • Seth, Tanmoy State Space Approach to Moore-Gibson-Thompson Generalized Piezo-Thermoelasticity with Memory-Dependent Derivative [Volume 13, Issue 2, 2026, Pages 451-463]
  • Shaikh, Javed Sikandar Mechanical and Tribological Characterization of Eco-Friendly Brake Pads Using Banana Peel Powder as a Sustainable Friction Material [Volume 13, Issue 2, 2026, Pages 427-437]
  • Shariati, Mahmoud Large Deflection Analysis of Graphene Sheets in the Thermal Environment Using Higher-Order Nonlocal Strain Gradient Principle [Volume 13, Issue 1, 2026, Pages 117-128]
  • Sharma, Avinash Mechanical and Physical Properties Observations for Cu-Gr-SiC Composite Synthesized by Powder Metallurgy [Volume 13, Issue 2, 2026, Pages 339-345]
  • Sharma, Ramesh Suryanarayana Performance Evaluation of Epoxy-Based Natural Composites Reinforced with Flax and Flax-Ramie Fiber [Volume 13, Issue 1, 2026, Pages 13-22]
  • Sharma, Sumit Kumar Vibration Analysis of FGM Annular Plate with Linearly Varying Thickness for Several Boundary Conditions [Volume 13, Issue 2, 2026, Pages 475-494]
  • Sheykholeslami, Mohammad Reza Parametric Investigation of Particle Movements in Ultrasonic Levitation Process Using Piezoelectric Materials [Volume 13, Issue 2, 2026, Pages 357-369]
  • Singsang, Witawat Biodegradation, Mechanical and Physical Properties of Poly(butylene succinate) and Natural Rubber Compound Blend Filled with Activated Carbon from Coconut Fruit [Volume 13, Issue 1, 2026, Pages 157-169]
  • Siriyanna, Manjunath Yadav Reinforcement Surface Modification Effect on the Microstructure, Mechanical, and Tensile Fractography of Al2219 Alloy B4C Composites [Volume 13, Issue 1, 2026, Pages 197-210]
  • Sittitanadol, Ing-orn Biodegradation, Mechanical and Physical Properties of Poly(butylene succinate) and Natural Rubber Compound Blend Filled with Activated Carbon from Coconut Fruit [Volume 13, Issue 1, 2026, Pages 157-169]
  • Sittitanadol, Ing-orn Characterization of Physical and Mechanical Properties, and Morphology of Wood Composites Derived from Milk Bottles and Teak Sawdust Powder [Volume 13, Issue 2, 2026, Pages 259-269]
  • Soleimanimehr, Hamid Experimental Analysis of the Effect of Mechanical Topology on the Surface of Biological Microgripper Made of Ionic-Polymer Metal Composite Smart Material [Volume 13, Issue 1, 2026, Pages 143-156]
  • Somdee, Patcharapon Biodegradation, Mechanical and Physical Properties of Poly(butylene succinate) and Natural Rubber Compound Blend Filled with Activated Carbon from Coconut Fruit [Volume 13, Issue 1, 2026, Pages 157-169]
  • Somdee, Patcharapon Characterization of Physical and Mechanical Properties, and Morphology of Wood Composites Derived from Milk Bottles and Teak Sawdust Powder [Volume 13, Issue 2, 2026, Pages 259-269]
  • Srakaew, Nuan La-ong Biodegradation, Mechanical and Physical Properties of Poly(butylene succinate) and Natural Rubber Compound Blend Filled with Activated Carbon from Coconut Fruit [Volume 13, Issue 1, 2026, Pages 157-169]
  • Srakaew, Nuan La-ong Characterization of Physical and Mechanical Properties, and Morphology of Wood Composites Derived from Milk Bottles and Teak Sawdust Powder [Volume 13, Issue 2, 2026, Pages 259-269]
  • Subravel, Visvalingam Prediction and Parametric Effect in Drilling of Natural Fiber Laminate Using Combined Taguchi- Artificial Neural Network Approach [Volume 13, Issue 2, 2026, Pages 415-426]
  • Supale, Jayant Pandurang Modeling and Experimental Validation of Carbon Fiber-Kevlar Honeycomb Core Sandwich Structure [Volume 13, Issue 1, 2026, Pages 69-82]
  • Suteja, Suteja Optimizing Mahogany Peel Powder-Polyester Composites for Sustainable Automotive Interior Panels: Effects of Filler Content on Mechanical and Thermal Properties [Volume 13, Issue 2, 2026, Pages 439-450]

T

  • Taghavian, Hossein Statistical Analysis of Delamination Effect on Natural Frequency of Composite Laminated Plate [Volume 13, Issue 1, 2026, Pages 129-142]
  • Taghipoor, Hossein Enhancing Mechanical Properties of Polypropylene Composites Reinforced with Date Palm Fiber Using Maleic Anhydride Grafted Polypropylene as a Compatibilizer [Volume 13, Issue 1, 2026, Pages 211-226]
  • Torabizadeh, Mohammad Amin Applying an Artificial Neural Network to Predict the Mechanical Properties of Epoxy Resin with Graphite Additive After Water Absorption [Volume 13, Issue 1, 2026, Pages 245-257]
  • Tran, Trung Thanh A Finite Element Formulation for Analyzing the Nonlinear Static Response of Bi-functionally Graded Microbeam Resting on Elastic Foundation Under Various Loads [Volume 13, Issue 1, 2026, Pages 227-243]

V

  • Velmurugan, Samikkannu Prediction and Parametric Effect in Drilling of Natural Fiber Laminate Using Combined Taguchi- Artificial Neural Network Approach [Volume 13, Issue 2, 2026, Pages 415-426]

W

  • Wardani, Deni Optimizing Mahogany Peel Powder-Polyester Composites for Sustainable Automotive Interior Panels: Effects of Filler Content on Mechanical and Thermal Properties [Volume 13, Issue 2, 2026, Pages 439-450]

Y

  • Yas, Mohammad Hossein Study on Thermal, Mechanical and Dynamic Properties of Epoxy Matrix with Hybrid of ‎Nanoclay/Carbon Nanotube [Volume 13, Issue 1, 2026, Pages 37-56]