Performance Evaluation of Epoxy-Based Natural Composites Reinforced with Flax and Flax-Ramie Fiber

Document Type : Research Article

Authors

Department of Mechanical Engineering, RV College of Engineering, Bengaluru, 560059, India

Abstract

Growing environmental concerns and regulatory pressure have necessitated the requirement for natural fiber-based composites for various applications. . This paper focuses on the performance evaluation of epoxy reinforced with Flax and flax-ramie fiber hybrid composites. The laminates were developed through the hand layup technique with Flax and Ramie fibers using epoxy resin. The prepared samples were further analyzed under various dynamic and static conditions, including Fast Fourier Transform (FFT) analysis, impact testing, water absorption testing, and density measurement. The flax-ramie hybrid composite shows dynamic and static properties, including better vibration control, impact resistance, and lower moisture absorption, compared to the flax fiber composite. With a density of 1.17 g/cm³, the absorbs more energy (10.47 J) and withstands higher impact forces (2.08 N). These characteristics make the hybrid composite more suitable for impact-prone and water-sensitive applications.
 
 
 
 
 
 
 

Keywords

Main Subjects


[1]   More, A.P., 2022. Flax fiber–based polymer composites: a review. Advanced Composites and Hybrid Materials5(1), pp.1-20.
[2]   Djafar, Z., Renreng, I. and Jannah, M., 2021. Tensile and bending strength analysis of ramie fiber and woven ramie reinforced epoxy composite. Journal of Natural Fibers, 18(12), pp.2315-2326.
[3]   Siregar, J.P., Zalinawati, M., Cionita, T., Rejab, M.R.M., Mawarnie, I., Jaafar, J. and Hamdan, M.H.M., 2021. Mechanical properties of hybrid sugar palm/ramie fibre reinforced epoxy composites. Materials Today: Proceedings, 46, pp.1729-1734.
[4]   Kumar, S., Zindani, D. and Bhowmik, S., 2020. Investigation of mechanical and viscoelastic properties of flax- and ramie-reinforced green composites for orthopedic implants. Journal of Materials Engineering and Performance29, pp.3161-3171.
[5]   Giridharan, R., 2019. Preparation and property evaluation of Glass/Ramie fibers reinforced epoxy hybrid composites. Composites Part B: Engineering167, pp.342-345.
[6]   Zhu, S., Xie, J., Sun, Q., Zhang, Z., Wan, J., Zhou, Z., Lu, J., Chen, J., Xu, J., Chen, K. and Fan, M., 2024. Recent advances on bast fiber composites: Engineering innovations, applications and perspectives. Composites Part B: Engineering, p.111738.
[7]   Mastouri, A., Efhamisisi, D., Tarmian, A., Boukherroub, R., Lexa, M., Karami, E., ... & Frigione, M., 2024. Sustainable superhydrophobic and self-cleaning wood via wax within Epoxy/PDMS nano-composite coatings: Durability related to surface morphology. Progress in Organic Coatings186, 107951.
            Rothenhäusler, F., Ouali, A.A., Rinberg, R., Demleitner, M., Kroll, L. and Ruckdaeschel, H., 2024. Influence of sodium hydroxide, silane, and siloxane treatments on the moisture sensitivity and mechanical properties of flax fiber composites. Polymer Composites.
[9]   Xiong, X., Wang, Z., Zhang, Z., Li, Q., Shen, C., Fan, F., Li, X. and Chen, M., 2023. Simulation and Experiment on the Low-Velocity Impact Response of Flax Fabric Reinforced Composites. Materials16(9), p.3489.
[10] Manaii, R., Terekhina, S., Chandreshah, L., Shafiq, N., Duriatti, D. and Guillaumat, L., 2023. Influence of fibre orientation, moisture absorption, and repairing performance on the low-velocity impact response of woven flax/Elium® thermoplastic bio-composites. Journal of Composite Materials57(23), pp.3601-3618.
[11] Ciardiello, R., Benelli, A. and Paolino, D.S., 2024. Static and Impact Properties of Flax-Reinforced Polymers Prepared with Conventional Epoxy and Sustainable Resins. Polymers16(2), p.190.
[12] Ciardiello, R., Benelli, A. and Paolino, D.S., 2024. Static and Impact Properties of Flax-Reinforced Polymers Prepared with Conventional Epoxy and Sustainable Resins. Polymers16(2), p.190.
[13] Ismail, A.S., Jawaid, M., Hamid, N.H., Yahaya, R., Sain, M. and Sarmin, S.N., 2022. Dimensional stability, density, void, and mechanical properties of flax fabrics reinforced bio-phenolic/epoxy composites. Journal of Industrial Textiles, 52, p.15280837221123594.
[14] Oliveira, M.S., da Luz, F.S., Pereira, A.C., Costa, U.O., Bezerra, W.B.A., da Cunha, J.D.S.C., Lopera, H.A.C. and Monteiro, S.N., 2022. Water Immersion Aging of Epoxy Resin and Fique Fabric Composites: Dynamic–Mechanical and Morphological Analysis. Polymers, 14(17), p.3650.
[15] Oun, A., Manalo, A., Alajarmeh, O., Abousnina, R. and Gerdes, A., 2022. Long-term water absorption of hybrid flax fibre-reinforced epoxy composites with graphene and its influence on mechanical properties. Polymers14(17), p.3679.
[16] Zouhar, J., Slaný, M., Sedlák, J., Joska, Z., Pokorný, Z., Barényi, I., Majerík, J. and Fiala, Z., 2022. Application of carbon–flax hybrid composite in high-performance electric personal watercraft. Polymers, 14(9), p.1765.
[17] Lakshmaiya, N., Ganesan, V., Paramasivam, P. and Dhanasekaran, S., 2022. Influence of biosynthesized nanoparticles addition and fibre content on the mechanical and moisture absorption behaviour of natural fibre composite. Applied Sciences, 12(24), p.13030.
[18] Pejic, B. M., Kostic, M. M., Skundric, P. D., & Praskalo, J. Z., 2008. The effects of hemicelluloses and lignin removal on water uptake behavior of hemp fibers. Bioresource technology99(15), pp. 7152-7159.
[19] Rajesh, D., Lenin, N., Cep, R., Anand, P., & Elangovan, M., 2022. Experimental investigation of bi-directional flax with ramie fibre-reinforced phenol-formaldehyde hybrid composites. Polymers, 14(22), 4887.
[20] www.astm.org. (n.d.). Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement. [online] Available at: https://www.astm.org/d0792-20.html.
[21] www.astm.org. (n.d.). Standard Test Method for Measuring Vibration-Damping Properties of Materials. [online] Available at: https://www.astm.org/e0756-05r17.html.
[22] www.astm.org. (n.d.). Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event. [online] Available at: https://www.astm.org/d7136_d7136m-15.html.
[23] www.astm.org. (n.d.). Standard Test Method for Moisture Absorption Properties and Equilibrium Conditioning of Polymer Matrix Composite Materials. [online] Available at: https://www.astm.org/d5229_d5229m-20.html.