Author Index

A

  • Abbasi, M. An Analytical Study on Effects of adding Nanoparticles to Water and Enhancement in Thermal Properties Based on Falkner-Skan Model [Volume 1, Issue 1, 2014, Pages 27-35]
  • Abdoos, Hassan On the Study of Mechanical Properties of Aluminum/Nano-Alumina Composites Produced via Powder Injection Molding [Volume 3, Issue 1, 2016, Pages 45-51]
  • Abdoos, Hassan Sintered Steel Composites Reinforced with Ceramic Nanoparticles: Fabrication, Characteristics and Wear Behavior [Volume 6, Issue 2, 2019, Pages 191-200]
  • Afshari, H. Size-dependent Effects on the Vibration Behavior of a Ti-moshenko Microbeam subjected to Pre-stress Loading based on DQM [Volume 3, Issue 2, 2016, Pages 99-112]
  • Afshari, Hassan Transverse Vibration for Non-uniform Timoshenko Nano-beams [Volume 2, Issue 1, 2015, Pages 1-16]
  • Aghajani, F. An Analytical Study on Effects of adding Nanoparticles to Water and Enhancement in Thermal Properties Based on Falkner-Skan Model [Volume 1, Issue 1, 2014, Pages 27-35]
  • Ahmadi, Omid Transient Thermal Stresses Analysis in a FPGM Cylinder [Volume 6, Issue 2, 2019, Pages 81-94]
  • Alalhessabi, S. The Structural and Mechanical Properties of Al-2.5%wt. B4C Met-al Matrix Nano-composite Fabricated by the Mechanical Alloying [Volume 2, Issue 1, 2015, Pages 39-44]
  • Alasvand Zarasvand, Kamran Effects of Nanotube/Matrix Interface on Multi-Walled Carbon Nanotube Reinforced Polymer Mechanical Properties [Volume 4, Issue 3, 2017, Pages 211-223]
  • Albooyeh, Alireza Influence of Different Foaming Conditions on the Mechanical, Physical, and Structural Properties of Polypropylene Foam [Volume 6, Issue 2, 2019, Pages 225-237]
  • Albooyeh, A.R. The Effect of Processing Conditions on the Mechanical Properties of Polypropylene/Mesoporous Silica-Hydroxyapatite Hybrid Nanocomposites [Volume 3, Issue 2, 2016, Pages 73-82]
  • Alibeigloo, Akbar Elasticity Solution of Functionally Graded Carbon Nanotube Reinforced Composite Cylindrical Panel [Volume 1, Issue 1, 2014, Pages 49-60]
  • Alimirzaei, Sajad Nonlocal Buckling and Vibration Analysis of Triple-Walled ZnO Piezoelectric Timoshenko Nano-beam Subjected to Magneto-Electro-Thermo-Mechanical Loadings [Volume 2, Issue 2, 2015, Pages 113-126]
  • Alizadeh, Mohsen Health Monitoring for Composite under Low-Cycle Cyclic Loading, Considering Effects of Acoustic Emission Sensor Type [Volume 6, Issue 1, 2019, Pages 19-26]
  • Alizadeh, Parisa Numerical Crashworthiness Analysis of Graded Layered Foam- Filled Tubes Under Axial Loading [Volume 6, Issue 1, 2019, Pages 57-64]
  • Alizad-Farzin, Yousef A Case Study for Fabrication of MWCNT-TiO2 Hybrid Reinforced Aluminium Matrix Nanocomposites [Volume 1, Issue 2, 2014, Pages 107-111]
  • Amir, Saeed Nonlinear Magneto-Nonlocal Vibration Analysis of Coupled Piezoelectric Micro-Plates Reinforced with Agglomerated CNTs [(Articles in Press)]
  • Amirjan, Mostafa The Role of Natural Additives on the Wear and Friction Proper-ties of Nanocomposites for Friction Applications [Volume 6, Issue 2, 2019, Pages 159-165]
  • Ansari, Reza Environmental Effects on Mechanical Properties of Glass/Epoxy and Fiber Metal Laminates, Part I: Hygrothermal Aging [Volume 4, Issue 3, 2017, Pages 187-196]
  • Ansari, Reza Environmental effects on mechanical properties of glass/epoxy and fiber metal laminates, Part II: Isothermal aging [Volume 4, Issue 3, 2017, Pages 197-205]
  • Arab, B. Mechanical Properties of CNT-Reinforced Polymer Nano-composites: A Molecular Dynamics Study [Volume 3, Issue 2, 2016, Pages 113-121]
  • Arefi, Mohammad The Effect of Temperature Dependency on the Thermo-Electro-Elastic Analysis of Functionally Graded Piezoelectric Spherical Shell [Volume 6, Issue 1, 2019, Pages 1-8]
  • Arefi, Mohammad Thermoelastic analysis of a functionally graded simple blade using first-order shear deformation theory [(Articles in Press)]
  • Arshid, Ehsan Nonlinear Magneto-Nonlocal Vibration Analysis of Coupled Piezoelectric Micro-Plates Reinforced with Agglomerated CNTs [(Articles in Press)]
  • Asanjarani, Ali Free Vibration Analysis of 2D Functionally Graded Annular Plate considering the Effect of Material Composition via 2D Differential Quadrature Method [Volume 2, Issue 2, 2015, Pages 95-111]
  • Asgari, Masoud Crushing Analysis of Empty and Foam-Filled Cylindrical and Conical Corrugated Composite Tubes [Volume 6, Issue 1, 2019, Pages 35-44]
  • Asgari, Tahmoores Free Vibrations Analysis of Functionally Graded Rectangular Nano-plates based on Nonlocal Exponential Shear Deformation Theory [Volume 2, Issue 2, 2015, Pages 79-93]
  • Ashory, Mohammad Reza Vibration Analysis of Circular Single-Layer Graphene Sheet Using Finite Element Method [Volume 6, Issue 2, 2019, Pages 131-138]
  • Auradi, V Mechanical Characterization and Wear Behavior of Nano TiO2 Particulates Reinforced Al7075 Alloy Composites [(Articles in Press)]
  • Ayatollahi, M.R. Atomic Simulation of Temperature Effect on the Mechanical Properties of Thin Films [Volume 2, Issue 1, 2015, Pages 31-38]
  • Azadi, Mahboobeh A Comparative Study on the Microstructure and Mechanical Prop-erties of Al-Si-Cu/1wt %NCP composites after T6 Heat Treatment [(Articles in Press)]
  • Azadi, Mohammad Health Monitoring for Composite under Low-Cycle Cyclic Loading, Considering Effects of Acoustic Emission Sensor Type [Volume 6, Issue 1, 2019, Pages 19-26]
  • Azadi, Mohammad Study of High-cycle Fatigue Properties in Tibia Bovine Bones based on Reliability and Scatter-band Predictions [(Articles in Press)]
  • Azarafza, Reza Theoretical, numerical, and experimental analyses of free vibrations of glass fiber reinforced polymer plates with central cutouts and free boundaries [Volume 5, Issue 1, 2018, Pages 67-74]
  • Azhari, Mojtaba Dynamic Stiffness Method for Free Vibration of Moderately Thick Functionally Graded Plates [Volume 3, Issue 1, 2016, Pages 15-30]

B

  • Babaei, Alireza Vibration characteristics of functionally graded micro-beam carrying an attached mass [(Articles in Press)]
  • Baghbani, Ramin Mesh-free Dynamic Analyses of FGM Sandwich Plates Resting on A Pasternak Elastic Foundation [Volume 4, Issue 2, 2017, Pages 153-168]
  • Bahmanabadi, Hamed Study of High-cycle Fatigue Properties in Tibia Bovine Bones based on Reliability and Scatter-band Predictions [(Articles in Press)]
  • Bahrami, Mohammad Propagation of Matrix Cracking and Induced Delaminatin in Cross-Ply Composite Beams Subjected to Bending Loads [Volume 6, Issue 1, 2019, Pages 45-50]
  • Bakhsheshy, Ali Free Natural Frequency Analysis of an FG Composite Rectangular Plate Coupled with Fluid using Rayleigh–Ritz Method [Volume 1, Issue 2, 2014, Pages 131-143]
  • Bakhshi, Arsalan Study on Compression and Flexural Behavior of ABS-SiO2 Poly-mer Matrix Composite Fabricated by Hot Extrusion [Volume 6, Issue 2, 2019, Pages 239-247]
  • Ben Daly, H. Modeling of Hygrothermal Damage of Composite Materials [Volume 3, Issue 2, 2016, Pages 137-144]
  • Bhowmick, Shubhankar An Investigation of Stress and Deformation Behavior of Functionally Graded Timoshenko Beams subjected to Thermo-Mechanical Load [(Articles in Press)]
  • Borhani, E. The Structural and Mechanical Properties of Al-2.5%wt. B4C Met-al Matrix Nano-composite Fabricated by the Mechanical Alloying [Volume 2, Issue 1, 2015, Pages 39-44]
  • Borhani, E. Effect of Particle Size on the Structural and Mechanical Properties of Al–AlN Nanocomposites Fabricated by Mechanical Alloying [Volume 2, Issue 2, 2015, Pages 73-78]
  • Borhani, Ehsan Effects of reinforcement distribution on the mechanical properties of Al–Fe3O4 nanocomposites fabricated via accumulative roll bonding [Volume 5, Issue 2, 2018, Pages 131-139]

C

  • Chalabi Tehran, Ata A Study of the Effect of TPU and Clay Nanoparticles on the Mechanical Behavior of PBT-Based Nanocomposites [Volume 4, Issue 3, 2017, Pages 179-186]
  • Chatti, S. Modeling of Hygrothermal Damage of Composite Materials [Volume 3, Issue 2, 2016, Pages 137-144]

D

  • Daniali, M. Dynamic Characteristics of Joined Steel and Carbon Fiber-Reinforced Plastic Tubes: Experimental and Numerical Investigation [Volume 4, Issue 2, 2017, Pages 88-97]
  • Darvizeh, Abolfazl Environmental Effects on Mechanical Properties of Glass/Epoxy and Fiber Metal Laminates, Part I: Hygrothermal Aging [Volume 4, Issue 3, 2017, Pages 187-196]
  • Darvizeh, Abolfazl Environmental effects on mechanical properties of glass/epoxy and fiber metal laminates, Part II: Isothermal aging [Volume 4, Issue 3, 2017, Pages 197-205]
  • Dashtbayazi, M. R. Nonlinear Vibration Analysis of the Composite Cable using Perturbation Method and the Green-Lagrangian Nonlinear Strain [Volume 6, Issue 1, 2019, Pages 27-34]
  • Davar, A. Free Vibration of Lattice Cylindrical Composite Shell Reinforced with Carbon Nano-tubes [Volume 2, Issue 1, 2015, Pages 61-72]
  • Davar, Ali Theoretical, numerical, and experimental analyses of free vibrations of glass fiber reinforced polymer plates with central cutouts and free boundaries [Volume 5, Issue 1, 2018, Pages 67-74]
  • Davar, Ali A New Three-Dimensional Refined Higher-Order Theory for Free Vibration Analysis of Composite Circular Cylindrical Shells [Volume 6, Issue 2, 2019, Pages 201-223]
  • Davar, Ali Thermal Buckling and Thermal Induced Free Vibration Analysis of Perforated Composite Plates: A Mathematical Model [(Articles in Press)]
  • Doddamani, Saleemsab Effect of Aging on Fracture Toughness of Al6061-Graphite Particulate Composites [Volume 6, Issue 2, 2019, Pages 139-146]
  • Doostmohamadi, Mahsa Improving the Performance of Porous Concrete Composites Using Zeolite as a Coarse Grain [Volume 5, Issue 2, 2018, Pages 157-163]

E

  • Ekhteraei Toussi, Hamid Delamination Analysis in Composite Root of a Carbon-Layer Reinforced Wind Turbine Blade [Volume 6, Issue 1, 2019, Pages 9-18]
  • Emami, J. Free Vibration of Lattice Cylindrical Composite Shell Reinforced with Carbon Nano-tubes [Volume 2, Issue 1, 2015, Pages 61-72]
  • Emrahi, Reza Investigation of Buckling Analysis of Epoxy/ Nanoclay/ Carbon Fiber Hybrid Laminated Nanocomposite: Using VARTM Technique for Preparation [Volume 3, Issue 1, 2016, Pages 63-71]
  • Esfandiar, Milad Capillary Effects on Surface Enhancement in a Non-Homogeneous Fibrous Porous Medium [Volume 5, Issue 1, 2018, Pages 83-90]
  • Eskandari Jam, J. Free Vibration of Lattice Cylindrical Composite Shell Reinforced with Carbon Nano-tubes [Volume 2, Issue 1, 2015, Pages 61-72]
  • Eskandari Jam, Jafar Theoretical, numerical, and experimental analyses of free vibrations of glass fiber reinforced polymer plates with central cutouts and free boundaries [Volume 5, Issue 1, 2018, Pages 67-74]
  • Eskandari Jam, Jafar Thermal Buckling and Thermal Induced Free Vibration Analysis of Perforated Composite Plates: A Mathematical Model [(Articles in Press)]
  • Eskandari-Jam, Jafar A Semi-analytical Solution for 3-D Dynamic Analysis of Thick Continuously Graded Carbon Nanotube-reinforced Annular Plates Resting on a Two-parameter Elastic Foundation [Volume 1, Issue 2, 2014, Pages 113-130]
  • Eskandarzadeh, Shahin Influence of Different Foaming Conditions on the Mechanical, Physical, and Structural Properties of Polypropylene Foam [Volume 6, Issue 2, 2019, Pages 225-237]
  • Eslami-Farsani, R. Accelerated Heat Aging Study of Phenolic/Basalt Fiber Reinforced Composites [Volume 3, Issue 1, 2016, Pages 1-7]
  • Eslami-Farsani, R. Investigation of Tensile Characteristics of an Epoxy Matrix Com-posite with Uni-Directional and Hybrid Tissue Natural Hemp Fibers [Volume 6, Issue 2, 2019, Pages 181-190]
  • Esmkhani, Masood Mechanical Properties of Graphene/Epoxy Nanocomposites under Static and Flexural Fatigue Loadings [Volume 1, Issue 1, 2014, Pages 1-7]

F

  • Falahzade, Sina An Analytical Approach to Thermoelastic Bending of Simply Supported Advanced Ribbed Composite Plates [Volume 5, Issue 2, 2018, Pages 173-185]
  • Fallah, Abolfazl Free Vibrations Analysis of Functionally Graded Rectangular Nano-plates based on Nonlocal Exponential Shear Deformation Theory [Volume 2, Issue 2, 2015, Pages 79-93]
  • Fallah, Abolfazl Free Vibration Analysis of Size-Dependent, Functionally Graded, Rectangular Nano/Micro-plates based on Modified Nonlinear Couple Stress Shear Deformation Plate Theories [Volume 4, Issue 2, 2017, Pages 127-137]
  • Fallah, Famida Non-Linear Analysis of Functionally Graded Sector Plates with Simply Supported Radial Edges Under Transverse Loading [Volume 6, Issue 1, 2019, Pages 65-74]
  • Fallahzadeh Rastehkenar, Sina The Effects of the Moving Load and the Attached Mass-Spring-Damper System Interactions on the Dynamic Responses of the Composite Plates: An Analytical Approach [Volume 2, Issue 1, 2015, Pages 17-30]
  • Faraji Kalajahi, Pouya A Study of the Effect of TPU and Clay Nanoparticles on the Mechanical Behavior of PBT-Based Nanocomposites [Volume 4, Issue 3, 2017, Pages 179-186]
  • Farhadinia, M. Mechanical Properties of CNT-Reinforced Polymer Nano-composites: A Molecular Dynamics Study [Volume 3, Issue 2, 2016, Pages 113-121]
  • Farhadinia, Mahmood Failure Pressure Prediction of Semi Spherical GFRP Shells in Thermal Environment [(Articles in Press)]
  • Faroughi, Shirko Adaptive Tunable Vibration Absorber using Shape Memory Alloy [Volume 2, Issue 1, 2015, Pages 55-60]
  • Faroughi, Shirko Vibration characteristics of functionally graded micro-beam carrying an attached mass [(Articles in Press)]
  • Farrokhabadi, Amin Damage Energy Evaluation in [55/-55]9 Composite Pipes using Acoustic Emission Method [Volume 2, Issue 2, 2015, Pages 127-134]
  • Farrokhabadi, Amin Propagation of Matrix Cracking and Induced Delaminatin in Cross-Ply Composite Beams Subjected to Bending Loads [Volume 6, Issue 1, 2019, Pages 45-50]
  • Farzannasab, Mahshad Study of High-cycle Fatigue Properties in Tibia Bovine Bones based on Reliability and Scatter-band Predictions [(Articles in Press)]
  • Farzin, Saeed Improving the Performance of Porous Concrete Composites Using Zeolite as a Coarse Grain [Volume 5, Issue 2, 2018, Pages 157-163]
  • Fazelzadeh, S. Ahmad Buckling Analysis of Spherical Composite Panels Reinforced by Carbon Nanotube [Volume 2, Issue 2, 2015, Pages 135-144]
  • Fazilati, Jamshid Dynamic Stability of Moderately Thick Composite Laminated Skew Plates using Finite Strip Method [Volume 2, Issue 2, 2015, Pages 145-150]
  • Fazli, Mostafa Investigation of Capsulated Epoxy and DCPD in Epoxy Based Self-healing Composites - DFT Calculation and Experimental Analysis [Volume 5, Issue 2, 2018, Pages 165-171]
  • Fereidoon, A.B. The Effect of Processing Conditions on the Mechanical Properties of Polypropylene/Mesoporous Silica-Hydroxyapatite Hybrid Nanocomposites [Volume 3, Issue 2, 2016, Pages 73-82]
  • Fereidoon, Abdolhossein Optimization of Hybrid Composite Laminate Based on the Frequency using Imperialist Competitive Algorithm [Volume 1, Issue 1, 2014, Pages 37-48]
  • Fereidoon, Abdolhossein A Numerical and Analytical Solution for the Free Vibration of Laminated Composites Using Different Plate Theories [Volume 4, Issue 1, 2017, Pages 75-87]
  • Firouzbakht, Vahid Predicting Young’s Modulus of Aggregated Carbon Nanotube Reinforced Polymer [Volume 1, Issue 1, 2014, Pages 9-16]

G

  • Ghadirian, Hossein Free Vibration Analysis of Composite Plates with Artificial Springs by Trigonometric Ritz Method [Volume 1, Issue 1, 2014, Pages 61-70]
  • Ghaemi, Fatemeh Failure Pressure Prediction of Semi Spherical GFRP Shells in Thermal Environment [(Articles in Press)]
  • Ghasemi, Ahmad Reza Distribution of Residual Stresses in Polymer Reinforced Carbon Nanotubes and Laminated Carbon Fibers [Volume 4, Issue 1, 2017, Pages 9-18]
  • Ghasemi, Ahmad Reza Open-Hole Size and Thermal Cycling Effects on Mass Loss and Surface Degradation of Polymer Matrix Composites [Volume 4, Issue 2, 2017, Pages 111-116]
  • Ghasemi, Ahmad Reza Creep Strain and Stress Analysis in Laminated Composite Pres-sure Vessels [Volume 5, Issue 2, 2018, Pages 141-147]
  • Ghasemi, Ahmad Reza Discrepancies Between Free Vibration of FML and Composite Cylindrical Shells Reinforced by CNTs [Volume 6, Issue 2, 2019, Pages 105-115]
  • Ghasemi, Ahmad Reza Effects of Magnetic Field in Creep Behavior of Three-Phase Laminated Composite Cylindrical Shells [Volume 6, Issue 1, 2019, Pages 51-56]
  • Ghasemi, Ahmad-Reza Size-dependent Bending of Geometrically Nonlinear of Micro-Laminated Composite Beam based on Modified Couple Stress Theory [Volume 3, Issue 1, 2016, Pages 53-62]
  • Ghasemi, Behrooz Evaluation of hardness and wear resistance of nano-sized titanium-carbide-reinforced commercially cast aluminum alloy matrices [Volume 5, Issue 1, 2018, Pages 75-81]
  • Ghasemi, Behrooz Investigation of Hardness, Morphology and Structural Analysis of NiCrBSi Composite Coating on Plain Carbon Steel [Volume 6, Issue 2, 2019, Pages 75-80]
  • Ghasemi Ghalebahman, Ahmad Delamination Analysis in Composite Root of a Carbon-Layer Reinforced Wind Turbine Blade [Volume 6, Issue 1, 2019, Pages 9-18]
  • Ghashochi-Bargh, Hadi Vibration Optimization of Fiber-Metal Laminated Composite Shallow Shell Panels Using an Adaptive PSO Algorithm [Volume 4, Issue 2, 2017, Pages 99-110]
  • Ghavanloo, Esmaeal Buckling Analysis of Spherical Composite Panels Reinforced by Carbon Nanotube [Volume 2, Issue 2, 2015, Pages 135-144]
  • Ghazavi, Mohammad Reza Free Vibration Analysis of Composite Plates with Artificial Springs by Trigonometric Ritz Method [Volume 1, Issue 1, 2014, Pages 61-70]
  • Ghazifard, Payman Numerical Crashworthiness Analysis of Graded Layered Foam- Filled Tubes Under Axial Loading [Volume 6, Issue 1, 2019, Pages 57-64]
  • Ghods, H. Effect of Particle Size on the Structural and Mechanical Properties of Al–AlN Nanocomposites Fabricated by Mechanical Alloying [Volume 2, Issue 2, 2015, Pages 73-78]
  • Ghorbanpour-Arani, Ali Biaxial Buckling and Bending of Smart Nanocomposite Plate Reinforced by CNTs using Extended Mixture Rule Approach [Volume 1, Issue 1, 2014, Pages 17-26]
  • Ghorbanzadeh Ahangari, Morteza Investigation of Capsulated Epoxy and DCPD in Epoxy Based Self-healing Composites - DFT Calculation and Experimental Analysis [Volume 5, Issue 2, 2018, Pages 165-171]
  • Ghorbanzadeh-Ahangari, Morteza Effect of Curvature on the Mechanical Properties of Graphene: A Density Functional Tight-binding Approach [Volume 3, Issue 1, 2016, Pages 9-13]
  • Ghugal, Y.M. Static Flexure of Soft Core Sandwich Beams using Trigonometric Shear Deformation Theory [Volume 2, Issue 1, 2015, Pages 45-53]
  • Ghugal, Yuwaraj M. Bending, buckling and free vibration responses of hyperbolic shear deformable FGM beams [Volume 5, Issue 1, 2018, Pages 13-24]
  • Golestanian, Hossein Effects of Nanotube/Matrix Interface on Multi-Walled Carbon Nanotube Reinforced Polymer Mechanical Properties [Volume 4, Issue 3, 2017, Pages 211-223]

H

  • Habibi, Nabard Transient Thermal Stresses Analysis in a FPGM Cylinder [Volume 6, Issue 2, 2019, Pages 81-94]
  • Habibnejad Korayem, Moharram Study of Laminated Composite MEMS and NEMS Performance in Nano Metric Operations [Volume 4, Issue 1, 2017, Pages 19-31]
  • Haftchenari, H. Size Effect on the Damaged Areas of Glass/Epoxy Structures under Low Velocity Impact [Volume 1, Issue 2, 2014, Pages 81-85]
  • Haghighatkhah, Amir Reza Mechanical Properties of Graphene/Epoxy Nanocomposites under Static and Flexural Fatigue Loadings [Volume 1, Issue 1, 2014, Pages 1-7]
  • Hakim, Shokoufeh Cured Poly(ethylene-g-maleic anhydride)/Graphene Nanocomposite: Properties and Characterization [Volume 5, Issue 1, 2018, Pages 1-12]
  • Hamidi, S.M. An Analytical Study on Effects of adding Nanoparticles to Water and Enhancement in Thermal Properties Based on Falkner-Skan Model [Volume 1, Issue 1, 2014, Pages 27-35]
  • Hatami, Shahabeddin Dynamic Stiffness Method for Free Vibration of Moderately Thick Functionally Graded Plates [Volume 3, Issue 1, 2016, Pages 15-30]
  • Hayati, Sajad Investigation of Tensile Characteristics of an Epoxy Matrix Com-posite with Uni-Directional and Hybrid Tissue Natural Hemp Fibers [Volume 6, Issue 2, 2019, Pages 181-190]
  • Hedayati, F. An Analytical Study on Effects of adding Nanoparticles to Water and Enhancement in Thermal Properties Based on Falkner-Skan Model [Volume 1, Issue 1, 2014, Pages 27-35]
  • Heidari-Rarani, Mohammad Modal Characteristics of Composite Beams with Single Delamination- A Simple Analytical Technique [Volume 1, Issue 2, 2014, Pages 97-106]
  • Hemmatian, Hossein Optimization of Hybrid Composite Laminate Based on the Frequency using Imperialist Competitive Algorithm [Volume 1, Issue 1, 2014, Pages 37-48]
  • Heydari Beni, Mohsen Thermal Buckling and Thermal Induced Free Vibration Analysis of Perforated Composite Plates: A Mathematical Model [(Articles in Press)]
  • Homayooni, Ahmad Study of Laminated Composite MEMS and NEMS Performance in Nano Metric Operations [Volume 4, Issue 1, 2017, Pages 19-31]
  • Hosseini Farrash, Seyyed Mahdi Experimental Study on Amine-Functionalized Carbon Nanotubes’ Effect on the Thermomechanical Properties of CNT/Epoxy Nano-composites [Volume 5, Issue 1, 2018, Pages 41-48]
  • Hosseinpour, Komeil Creep Strain and Stress Analysis in Laminated Composite Pres-sure Vessels [Volume 5, Issue 2, 2018, Pages 141-147]
  • Hosseinpour, Komeil Effects of Magnetic Field in Creep Behavior of Three-Phase Laminated Composite Cylindrical Shells [Volume 6, Issue 1, 2019, Pages 51-56]
  • H Soudmand, Behzad Numerical Simulation of a Hybrid Nanocomposite Containing Ca-CO3 and Short Glass Fibers Subjected to Tensile Loading [Volume 4, Issue 2, 2017, Pages 117-125]

I

  • Inala, Ramu Influence of Hygrothermal environment and FG material on natural frequency and parametric instability of Plates [(Articles in Press)]

J

  • Jabbari, Amirhossein Experimental Investigation of FGM Dental Implant Properties Made from Ti/HA Composite [Volume 4, Issue 3, 2017, Pages 233-237]
  • Jafari, Behrouz Cured Poly(ethylene-g-maleic anhydride)/Graphene Nanocomposite: Properties and Characterization [Volume 5, Issue 1, 2018, Pages 1-12]
  • Jafari, Mohammad Optimization of infinite composite plates with quasi-triangular holes under in-plane loading [Volume 5, Issue 2, 2018, Pages 115-130]
  • Jafari, Seyed Mohammad Health Monitoring for Composite under Low-Cycle Cyclic Loading, Considering Effects of Acoustic Emission Sensor Type [Volume 6, Issue 1, 2019, Pages 19-26]
  • Jafari Mofrad-Taheri, M. Static and Free Vibration Analyses of Functionally Graded Nano-composite Plates Reinforced by Wavy Carbon Nanotubes Resting on a Pasternak Elastic Foundation [Volume 3, Issue 2, 2016, Pages 123-135]
  • Jafarinezhad, Mohammad Reza Compression Analysis of Hollow Cylinder Basalt Continuous Filament Epoxy Composite Filled with Shape Memory Wire [Volume 4, Issue 3, 2017, Pages 225-232]
  • Jaferzadeh Khoramabadian, Ali Asghar Investigation of Tensile Characteristics of an Epoxy Matrix Com-posite with Uni-Directional and Hybrid Tissue Natural Hemp Fibers [Volume 6, Issue 2, 2019, Pages 181-190]
  • Jam, J.E. Mechanical Properties of CNT-Reinforced Polymer Nano-composites: A Molecular Dynamics Study [Volume 3, Issue 2, 2016, Pages 113-121]

K

  • Kabiri, Ali Sensitivity Analysis of Fiber-Reinforced Lamina Micro-Electro-Mechanical Switches with Nonlinear Vibration Using a Higher Order Hamiltonian Approach [Volume 5, Issue 1, 2018, Pages 25-39]
  • Kaleemulla K, Mohamed Effect of Aging on Fracture Toughness of Al6061-Graphite Particulate Composites [Volume 6, Issue 2, 2019, Pages 139-146]
  • Kamali, Kamran A novel method for considering interlayer effects between graphene nanoribbons and elastic medium in free vibration analysis [(Articles in Press)]
  • Kanoria, M. Elasto-Thermodiffusive Response in a Two-Dimensional Transversely Isotropic Medium [Volume 6, Issue 2, 2019, Pages 95-104]
  • Kanoria, M. Thermoelastic Interaction in a Three-Dimensional Layered Sandwich Structure [Volume 5, Issue 2, 2018, Pages 187-198]
  • Karami, Hojat Improving the Performance of Porous Concrete Composites Using Zeolite as a Coarse Grain [Volume 5, Issue 2, 2018, Pages 157-163]
  • Karamooz, Mohammadreza Elastic analysis of Shrink-fitted Thick FGM Cylinders Based on Linear Plane Elasticity Theory [(Articles in Press)]
  • Karimi, Mahdi Fluid-Structure Interaction of Vibrating Composite Piezoelectric Plates using exponential shear deformation theory [(Articles in Press)]
  • Karimi, Mahdi Analytical Approach for Thermo-electro-mechanical Vibration of Piezoelectric Nanoplates Resting on Elastic Foundations based on Nonlocal Theory [Volume 6, Issue 2, 2019, Pages 117-129]
  • Karimi, Mohamadhadi Non-Linear Analysis of Functionally Graded Sector Plates with Simply Supported Radial Edges Under Transverse Loading [Volume 6, Issue 1, 2019, Pages 65-74]
  • Karimzadeh, A. Atomic Simulation of Temperature Effect on the Mechanical Properties of Thin Films [Volume 2, Issue 1, 2015, Pages 31-38]
  • Keshvari Tabatabaie, Fereshteh Sadat Investigation of Hardness, Morphology and Structural Analysis of NiCrBSi Composite Coating on Plain Carbon Steel [Volume 6, Issue 2, 2019, Pages 75-80]
  • Keykha, Amir Hamzeh Experimental investigation of the strength of glass fiber-reinforced concrete exposed to high temperature [Volume 5, Issue 2, 2018, Pages 103-113]
  • Khalili, Mohammad Reza Compression Analysis of Hollow Cylinder Basalt Continuous Filament Epoxy Composite Filled with Shape Memory Wire [Volume 4, Issue 3, 2017, Pages 225-232]
  • Khalili, S. Mohammad Reza Investigation of Tensile Characteristics of an Epoxy Matrix Com-posite with Uni-Directional and Hybrid Tissue Natural Hemp Fibers [Volume 6, Issue 2, 2019, Pages 181-190]
  • Khalili, S.M.R. Accelerated Heat Aging Study of Phenolic/Basalt Fiber Reinforced Composites [Volume 3, Issue 1, 2016, Pages 1-7]
  • Khalili, S.M.R. The Effect of External Skin on Buckling Strength of Composite Lattice Cylinders Based on Numerical and Experimental Analysis [Volume 3, Issue 2, 2016, Pages 83-87]
  • Kharaman-Nia, Iman Experimental Study on Double-Walled Copper and Carbon/Epoxy Composite Tubes under the Axial Loading [Volume 1, Issue 2, 2014, Pages 71-79]
  • Khatibi, Mohammad Mahdi Vibration Analysis of Circular Single-Layer Graphene Sheet Using Finite Element Method [Volume 6, Issue 2, 2019, Pages 131-138]
  • Khodabakhsh, Rasoul Nonlinear Vibration Analysis of the Composite Cable using Perturbation Method and the Green-Lagrangian Nonlinear Strain [Volume 6, Issue 1, 2019, Pages 27-34]
  • Khodadadi, Mohammad Precision Closed-form Solution for Out-of-plane Vibration of Rectangular Plates via Trigonometric Shear Deformation Theory [Volume 3, Issue 1, 2016, Pages 31-43]
  • Khorsand, Hamid On the Study of Mechanical Properties of Aluminum/Nano-Alumina Composites Produced via Powder Injection Molding [Volume 3, Issue 1, 2016, Pages 45-51]
  • Khorshidi, K. Analytical Solution for Sound Radiation of Vibrating Circular Plates coupled with Piezo-electric Layers [Volume 3, Issue 2, 2016, Pages 89-98]
  • Khorshidi, Korosh Free Vibration Analysis of Composite Plates with Artificial Springs by Trigonometric Ritz Method [Volume 1, Issue 1, 2014, Pages 61-70]
  • Khorshidi, Korosh Free Natural Frequency Analysis of an FG Composite Rectangular Plate Coupled with Fluid using Rayleigh–Ritz Method [Volume 1, Issue 2, 2014, Pages 131-143]
  • Khorshidi, Korosh Precision Closed-form Solution for Out-of-plane Vibration of Rectangular Plates via Trigonometric Shear Deformation Theory [Volume 3, Issue 1, 2016, Pages 31-43]
  • Khorshidi, Korosh Free Vibrations Analysis of Functionally Graded Rectangular Nano-plates based on Nonlocal Exponential Shear Deformation Theory [Volume 2, Issue 2, 2015, Pages 79-93]
  • Khorshidi, Korosh Free Vibration Analysis of Size-Dependent, Functionally Graded, Rectangular Nano/Micro-plates based on Modified Nonlinear Couple Stress Shear Deformation Plate Theories [Volume 4, Issue 2, 2017, Pages 127-137]
  • Khorshidi, Korosh Fluid-Structure Interaction of Vibrating Composite Piezoelectric Plates using exponential shear deformation theory [(Articles in Press)]
  • Khorshidi, Korosh Analytical Approach for Thermo-electro-mechanical Vibration of Piezoelectric Nanoplates Resting on Elastic Foundations based on Nonlocal Theory [Volume 6, Issue 2, 2019, Pages 117-129]
  • Khosravi, H. Flexural Behavior of Fiber–Metal Laminates Reinforced with Surface-Functionalized Nanoclay [Volume 5, Issue 2, 2018, Pages 149-156]
  • Khostavan, Sepide Investigation of Capsulated Epoxy and DCPD in Epoxy Based Self-healing Composites - DFT Calculation and Experimental Analysis [Volume 5, Issue 2, 2018, Pages 165-171]
  • Kohandani, Reza A New Three-Dimensional Refined Higher-Order Theory for Free Vibration Analysis of Composite Circular Cylindrical Shells [Volume 6, Issue 2, 2019, Pages 201-223]
  • Kori, S A Mechanical Characterization and Wear Behavior of Nano TiO2 Particulates Reinforced Al7075 Alloy Composites [(Articles in Press)]
  • Kouchakzadeh, M. A. Dynamic Characteristics of Joined Steel and Carbon Fiber-Reinforced Plastic Tubes: Experimental and Numerical Investigation [Volume 4, Issue 2, 2017, Pages 88-97]

L

  • Liaghat, Gholam Hossein Investigation into The Behavior of Nano-composite Tubes at Ballistic Impact [Volume 4, Issue 3, 2017, Pages 207-210]
  • Loghman, Abbas Thermoelastic analysis of a functionally graded simple blade using first-order shear deformation theory [(Articles in Press)]

M

  • Mafi, Mohammad Evaluation of hardness and wear resistance of nano-sized titanium-carbide-reinforced commercially cast aluminum alloy matrices [Volume 5, Issue 1, 2018, Pages 75-81]
  • Mahapatra, Deepak An Investigation of Stress and Deformation Behavior of Functionally Graded Timoshenko Beams subjected to Thermo-Mechanical Load [(Articles in Press)]
  • Mahbod, Mahshid Crushing Analysis of Empty and Foam-Filled Cylindrical and Conical Corrugated Composite Tubes [Volume 6, Issue 1, 2019, Pages 35-44]
  • Mahdavi, Hamid Reza Damage Energy Evaluation in [55/-55]9 Composite Pipes using Acoustic Emission Method [Volume 2, Issue 2, 2015, Pages 127-134]
  • Maher, Roham Compression Analysis of Hollow Cylinder Basalt Continuous Filament Epoxy Composite Filled with Shape Memory Wire [Volume 4, Issue 3, 2017, Pages 225-232]
  • Mahmodzade Hoseyni, Seyed Ahmad Optimization of infinite composite plates with quasi-triangular holes under in-plane loading [Volume 5, Issue 2, 2018, Pages 115-130]
  • Mahmoodi, Masoud Using the Taguchi Method for Experimental and Numerical Investigations on the Square-Cup Deep-Drawing Process for Aluminum/Steel Laminated Sheets [Volume 4, Issue 2, 2017, Pages 169-177]
  • Malek-Mohammadi, Hosein Free Vibration and Buckling Analyses of Functionally Graded Nanocomposite Plates Reinforced by Carbon Nanotube [Volume 4, Issue 1, 2017, Pages 59-73]
  • Manafi, S.A. The Structural and Mechanical Properties of Al-2.5%wt. B4C Met-al Matrix Nano-composite Fabricated by the Mechanical Alloying [Volume 2, Issue 1, 2015, Pages 39-44]
  • Manafi, S.A. Effect of Particle Size on the Structural and Mechanical Properties of Al–AlN Nanocomposites Fabricated by Mechanical Alloying [Volume 2, Issue 2, 2015, Pages 73-78]
  • Managheb, Seyyed Amir Mohammad Nonlocal Buckling and Vibration Analysis of Triple-Walled ZnO Piezoelectric Timoshenko Nano-beam Subjected to Magneto-Electro-Thermo-Mechanical Loadings [Volume 2, Issue 2, 2015, Pages 113-126]
  • Mehrabani, Mahboube Vibration Analysis of Circular Single-Layer Graphene Sheet Using Finite Element Method [Volume 6, Issue 2, 2019, Pages 131-138]
  • Mirzaee, Omid A Case Study for Fabrication of MWCNT-TiO2 Hybrid Reinforced Aluminium Matrix Nanocomposites [Volume 1, Issue 2, 2014, Pages 107-111]
  • Mirzaee, Omid Evaluation of hardness and wear resistance of nano-sized titanium-carbide-reinforced commercially cast aluminum alloy matrices [Volume 5, Issue 1, 2018, Pages 75-81]
  • Mirzaee, Omid Investigation of Hardness, Morphology and Structural Analysis of NiCrBSi Composite Coating on Plain Carbon Steel [Volume 6, Issue 2, 2019, Pages 75-80]
  • Moazzeni, Mostafa Nonlocal Analysis of Longitudinal Dynamic Behavior of Nanobars with Surface Energy Effect [Volume 6, Issue 2, 2019, Pages 147-158]
  • Mohammad Hosseini Mirzaei, Manouchehr Thermoelastic analysis of a functionally graded simple blade using first-order shear deformation theory [(Articles in Press)]
  • Mohammadi-Fesharaki, Mohammad Distribution of Residual Stresses in Polymer Reinforced Carbon Nanotubes and Laminated Carbon Fibers [Volume 4, Issue 1, 2017, Pages 9-18]
  • Mohammadi Hooyeh, H. Size-dependent Effects on the Vibration Behavior of a Ti-moshenko Microbeam subjected to Pre-stress Loading based on DQM [Volume 3, Issue 2, 2016, Pages 99-112]
  • Mohammadimehr, M. Size-dependent Effects on the Vibration Behavior of a Ti-moshenko Microbeam subjected to Pre-stress Loading based on DQM [Volume 3, Issue 2, 2016, Pages 99-112]
  • Mohammadimehr, Mehdi Biaxial Buckling and Bending of Smart Nanocomposite Plate Reinforced by CNTs using Extended Mixture Rule Approach [Volume 1, Issue 1, 2014, Pages 17-26]
  • Mohammadimehr, Mehdi Nonlocal Buckling and Vibration Analysis of Triple-Walled ZnO Piezoelectric Timoshenko Nano-beam Subjected to Magneto-Electro-Thermo-Mechanical Loadings [Volume 2, Issue 2, 2015, Pages 113-126]
  • Mohammad Panahiha, Hamid A New Three-Dimensional Refined Higher-Order Theory for Free Vibration Analysis of Composite Circular Cylindrical Shells [Volume 6, Issue 2, 2019, Pages 201-223]
  • Mohammadzadeh Gonabadi, Arash Improving the Performance of the Sandwich Panel with the Corrugated Core Filled with Metal Foam: Mathematical and Numerical Methods [Volume 6, Issue 2, 2019, Pages 249-261]
  • Mohandes, Masood Size-dependent Bending of Geometrically Nonlinear of Micro-Laminated Composite Beam based on Modified Couple Stress Theory [Volume 3, Issue 1, 2016, Pages 53-62]
  • Mohandes, Masood Discrepancies Between Free Vibration of FML and Composite Cylindrical Shells Reinforced by CNTs [Volume 6, Issue 2, 2019, Pages 105-115]
  • Mohsenimonfared, Hamid Free Vibration Analysis of 2D Functionally Graded Annular Plate considering the Effect of Material Composition via 2D Differential Quadrature Method [Volume 2, Issue 2, 2015, Pages 95-111]
  • Mokhtari, Madhid An Analytical Approach to Thermoelastic Bending of Simply Supported Advanced Ribbed Composite Plates [Volume 5, Issue 2, 2018, Pages 173-185]
  • Momeni-Khabisi, Hamed Mesh-free Dynamic Analyses of FGM Sandwich Plates Resting on A Pasternak Elastic Foundation [Volume 4, Issue 2, 2017, Pages 153-168]
  • Moradi, Mahdi Open-Hole Size and Thermal Cycling Effects on Mass Loss and Surface Degradation of Polymer Matrix Composites [Volume 4, Issue 2, 2017, Pages 111-116]
  • Moradi-dastjerdi, Rasool Free Vibration and Buckling Analyses of Functionally Graded Nanocomposite Plates Reinforced by Carbon Nanotube [Volume 4, Issue 1, 2017, Pages 59-73]
  • Moradi-dastjerdi, Rasool Mesh-free Dynamic Analyses of FGM Sandwich Plates Resting on A Pasternak Elastic Foundation [Volume 4, Issue 2, 2017, Pages 153-168]
  • Moradi Dastjerdi, R. Static and Free Vibration Analyses of Functionally Graded Nano-composite Plates Reinforced by Wavy Carbon Nanotubes Resting on a Pasternak Elastic Foundation [Volume 3, Issue 2, 2016, Pages 123-135]
  • Mousavi, Arash Influence of Different Foaming Conditions on the Mechanical, Physical, and Structural Properties of Polypropylene Foam [Volume 6, Issue 2, 2019, Pages 225-237]
  • Mousavi, Sayed-Farhad Improving the Performance of Porous Concrete Composites Using Zeolite as a Coarse Grain [Volume 5, Issue 2, 2018, Pages 157-163]
  • Mozafari, M. Size Effect on the Damaged Areas of Glass/Epoxy Structures under Low Velocity Impact [Volume 1, Issue 2, 2014, Pages 81-85]

N

  • Nagaral, Madeva Mechanical Characterization and Wear Behavior of Nano TiO2 Particulates Reinforced Al7075 Alloy Composites [(Articles in Press)]
  • Najafi, M. Accelerated Heat Aging Study of Phenolic/Basalt Fiber Reinforced Composites [Volume 3, Issue 1, 2016, Pages 1-7]
  • Najafi, Moslem Environmental Effects on Mechanical Properties of Glass/Epoxy and Fiber Metal Laminates, Part I: Hygrothermal Aging [Volume 4, Issue 3, 2017, Pages 187-196]
  • Najafi, Moslem Environmental effects on mechanical properties of glass/epoxy and fiber metal laminates, Part II: Isothermal aging [Volume 4, Issue 3, 2017, Pages 197-205]
  • Najibi, Amir Numerical Crashworthiness Analysis of Graded Layered Foam- Filled Tubes Under Axial Loading [Volume 6, Issue 1, 2019, Pages 57-64]
  • Navazi, H. M. Dynamic Characteristics of Joined Steel and Carbon Fiber-Reinforced Plastic Tubes: Experimental and Numerical Investigation [Volume 4, Issue 2, 2017, Pages 88-97]
  • Nazemnezhad, Reza Nonlocal Analysis of Longitudinal Dynamic Behavior of Nanobars with Surface Energy Effect [Volume 6, Issue 2, 2019, Pages 147-158]
  • Nazemnezhad, Reza A novel method for considering interlayer effects between graphene nanoribbons and elastic medium in free vibration analysis [(Articles in Press)]
  • Nejati, Mohammad Free Vibration Analysis of 2D Functionally Graded Annular Plate considering the Effect of Material Composition via 2D Differential Quadrature Method [Volume 2, Issue 2, 2015, Pages 95-111]
  • Niknejad, Abbas Experimental Study on Double-Walled Copper and Carbon/Epoxy Composite Tubes under the Axial Loading [Volume 1, Issue 2, 2014, Pages 71-79]
  • Nouri, Mohammad Cured Poly(ethylene-g-maleic anhydride)/Graphene Nanocomposite: Properties and Characterization [Volume 5, Issue 1, 2018, Pages 1-12]
  • Nouri Damghani, Mohammad Improving the Performance of the Sandwich Panel with the Corrugated Core Filled with Metal Foam: Mathematical and Numerical Methods [Volume 6, Issue 2, 2019, Pages 249-261]

O

  • Olad, Ali A Study of the Effect of TPU and Clay Nanoparticles on the Mechanical Behavior of PBT-Based Nanocomposites [Volume 4, Issue 3, 2017, Pages 179-186]
  • Omidi, Narges Experimental Investigation of FGM Dental Implant Properties Made from Ti/HA Composite [Volume 4, Issue 3, 2017, Pages 233-237]
  • Omrani, Abdollah Investigation of Capsulated Epoxy and DCPD in Epoxy Based Self-healing Composites - DFT Calculation and Experimental Analysis [Volume 5, Issue 2, 2018, Pages 165-171]
  • Ouled Ahmed, R.B.A. Modeling of Hygrothermal Damage of Composite Materials [Volume 3, Issue 2, 2016, Pages 137-144]

P

  • Pagoli, M. Analytical Solution for Sound Radiation of Vibrating Circular Plates coupled with Piezo-electric Layers [Volume 3, Issue 2, 2016, Pages 89-98]
  • Payganeh, G. Static and Free Vibration Analyses of Functionally Graded Nano-composite Plates Reinforced by Wavy Carbon Nanotubes Resting on a Pasternak Elastic Foundation [Volume 3, Issue 2, 2016, Pages 123-135]
  • Pirouzi, Behrooz Effects of reinforcement distribution on the mechanical properties of Al–Fe3O4 nanocomposites fabricated via accumulative roll bonding [Volume 5, Issue 2, 2018, Pages 131-139]
  • Pouresmaeeli, Saleh Buckling Analysis of Spherical Composite Panels Reinforced by Carbon Nanotube [Volume 2, Issue 2, 2015, Pages 135-144]

R

  • Rafiee, Roham Predicting Young’s Modulus of Aggregated Carbon Nanotube Reinforced Polymer [Volume 1, Issue 1, 2014, Pages 9-16]
  • Rahi, Majid Transverse Vibration for Non-uniform Timoshenko Nano-beams [Volume 2, Issue 1, 2015, Pages 1-16]
  • Rahimi, A.S. Atomic Simulation of Temperature Effect on the Mechanical Properties of Thin Films [Volume 2, Issue 1, 2015, Pages 31-38]
  • Rahimi, Gholam Hosein Damage Energy Evaluation in [55/-55]9 Composite Pipes using Acoustic Emission Method [Volume 2, Issue 2, 2015, Pages 127-134]
  • Rahimi, Gholam Hosein Investigation into The Behavior of Nano-composite Tubes at Ballistic Impact [Volume 4, Issue 3, 2017, Pages 207-210]
  • Rahimi Sharbaf, Hamed Investigation into The Behavior of Nano-composite Tubes at Ballistic Impact [Volume 4, Issue 3, 2017, Pages 207-210]
  • Rahmani, Arash Vibration characteristics of functionally graded micro-beam carrying an attached mass [(Articles in Press)]
  • Rahmani, Hossein Elastic analysis of Shrink-fitted Thick FGM Cylinders Based on Linear Plane Elasticity Theory [(Articles in Press)]
  • Rajabizadeh Mirakabad, S. Static and Free Vibration Analyses of Functionally Graded Nano-composite Plates Reinforced by Wavy Carbon Nanotubes Resting on a Pasternak Elastic Foundation [Volume 3, Issue 2, 2016, Pages 123-135]
  • Rajabpour, Morteza Compression Analysis of Hollow Cylinder Basalt Continuous Filament Epoxy Composite Filled with Shape Memory Wire [Volume 4, Issue 3, 2017, Pages 225-232]
  • Razavi, Soheil On the Buckling the Behavior of a Multiphase Smart Plate based on a Higher-order Theory [Volume 4, Issue 1, 2017, Pages 47-58]
  • Rezaeepazhand, Jalil Experimental Study on Amine-Functionalized Carbon Nanotubes’ Effect on the Thermomechanical Properties of CNT/Epoxy Nano-composites [Volume 5, Issue 1, 2018, Pages 41-48]
  • Ronagh, Hamid-Reza Dynamic Stiffness Method for Free Vibration of Moderately Thick Functionally Graded Plates [Volume 3, Issue 1, 2016, Pages 15-30]
  • Rostamiyan, Y. An Analytical Study on Effects of adding Nanoparticles to Water and Enhancement in Thermal Properties Based on Falkner-Skan Model [Volume 1, Issue 1, 2014, Pages 27-35]
  • Rostamiyan, Yasser Investigation of Buckling Analysis of Epoxy/ Nanoclay/ Carbon Fiber Hybrid Laminated Nanocomposite: Using VARTM Technique for Preparation [Volume 3, Issue 1, 2016, Pages 63-71]
  • Rostamiyan, Yasser Improving Mechanical Properties of Nanocomposite-based Epoxy by High-impact Polystyrene and Multiwalled Carbon Nanotubes: Optimizing by a Mixture Design Approach [Volume 4, Issue 1, 2017, Pages 33-45]
  • Rostamiyan, Yasser Study on Compression and Flexural Behavior of ABS-SiO2 Poly-mer Matrix Composite Fabricated by Hot Extrusion [Volume 6, Issue 2, 2019, Pages 239-247]
  • Rousta-Navi, Borhan Biaxial Buckling and Bending of Smart Nanocomposite Plate Reinforced by CNTs using Extended Mixture Rule Approach [Volume 1, Issue 1, 2014, Pages 17-26]

S

  • Saadatmand, Hossein Damage Energy Evaluation in [55/-55]9 Composite Pipes using Acoustic Emission Method [Volume 2, Issue 2, 2015, Pages 127-134]
  • Sadeghinezhad, M. S. Thermoelastic Analysis of Compressor Spool in Turbojet Engine and Redesign it Using Functionally Graded Materials with Opti-mal Coefficients [Volume 6, Issue 2, 2019, Pages 167-179]
  • Sadeghzadeh, Sadegh Study of Laminated Composite MEMS and NEMS Performance in Nano Metric Operations [Volume 4, Issue 1, 2017, Pages 19-31]
  • Sadeghzadeh, Sadegh Geometric Effects on Nanopore Creation in Graphene and on the Impact-withstanding Efficiency of Graphene Nanosheets [Volume 5, Issue 1, 2018, Pages 91-102]
  • Sadeghzadeh, Sadegh Sensitivity Analysis of Fiber-Reinforced Lamina Micro-Electro-Mechanical Switches with Nonlinear Vibration Using a Higher Order Hamiltonian Approach [Volume 5, Issue 1, 2018, Pages 25-39]
  • Sadeghzadeh, Sadegh Vibration Analysis of Circular Single-Layer Graphene Sheet Using Finite Element Method [Volume 6, Issue 2, 2019, Pages 131-138]
  • Sadr, Mohammad Homayoun Vibration Optimization of Fiber-Metal Laminated Composite Shallow Shell Panels Using an Adaptive PSO Algorithm [Volume 4, Issue 2, 2017, Pages 99-110]
  • Safari, Mehrdad Stress Analysis of FGM Rotating Disk Subjected to Mechanical and Thermal Loads in Aircraft Gas Turbine Engine [(Articles in Press)]
  • Safari Naderi, Mohammad Hadi Delamination Analysis in Composite Root of a Carbon-Layer Reinforced Wind Turbine Blade [Volume 6, Issue 1, 2019, Pages 9-18]
  • Sakiani, Hassan The Role of Natural Additives on the Wear and Friction Proper-ties of Nanocomposites for Friction Applications [Volume 6, Issue 2, 2019, Pages 159-165]
  • Salarkia, M.R. Size-dependent Effects on the Vibration Behavior of a Ti-moshenko Microbeam subjected to Pre-stress Loading based on DQM [Volume 3, Issue 2, 2016, Pages 99-112]
  • Salehi, Hamid Reza In Situ Formation of SiC/CNT Ceramic Nanocomposite by Phenolic Pyrolysis [Volume 1, Issue 2, 2014, Pages 87-96]
  • Salehi, Manouchehr In Situ Formation of SiC/CNT Ceramic Nanocomposite by Phenolic Pyrolysis [Volume 1, Issue 2, 2014, Pages 87-96]
  • Salehi Kolahi, Mohammad Reza Elastic analysis of Shrink-fitted Thick FGM Cylinders Based on Linear Plane Elasticity Theory [(Articles in Press)]
  • Samawati, Sadi Transient Thermal Stresses Analysis in a FPGM Cylinder [Volume 6, Issue 2, 2019, Pages 81-94]
  • Sanyal, Shubhashis An Investigation of Stress and Deformation Behavior of Functionally Graded Timoshenko Beams subjected to Thermo-Mechanical Load [(Articles in Press)]
  • Sayar, Hassan Health Monitoring for Composite under Low-Cycle Cyclic Loading, Considering Effects of Acoustic Emission Sensor Type [Volume 6, Issue 1, 2019, Pages 19-26]
  • Sayyad, Atteshamuddin S. A Quasi-3D Polynomial Shear and Normal Deformation Theory for Laminated Composite, Sandwich, and Functionally Graded Beams [Volume 4, Issue 2, 2017, Pages 139-152]
  • Sayyad, Atteshamuddin S. Bending, buckling and free vibration responses of hyperbolic shear deformable FGM beams [Volume 5, Issue 1, 2018, Pages 13-24]
  • Sayyad, Atteshamuddin S. Static Flexure of Soft Core Sandwich Beams using Trigonometric Shear Deformation Theory [Volume 2, Issue 1, 2015, Pages 45-53]
  • Sedighi, Mohammad Experimental Investigation of FGM Dental Implant Properties Made from Ti/HA Composite [Volume 4, Issue 3, 2017, Pages 233-237]
  • Selahi, Ehsan Semi Analytical Transient Dynamic Analysis of Composite Adhesive Single-lap Joints [(Articles in Press)]
  • Shahnazari, Mohammad Reza Capillary Effects on Surface Enhancement in a Non-Homogeneous Fibrous Porous Medium [Volume 5, Issue 1, 2018, Pages 83-90]
  • Shahrabi, A. Flexural Behavior of Fiber–Metal Laminates Reinforced with Surface-Functionalized Nanoclay [Volume 5, Issue 2, 2018, Pages 149-156]
  • Shahravi, Morteza An Analytical Approach to Thermoelastic Bending of Simply Supported Advanced Ribbed Composite Plates [Volume 5, Issue 2, 2018, Pages 173-185]
  • Shahriari, Behrooz Thermoelastic Analysis of Compressor Spool in Turbojet Engine and Redesign it Using Functionally Graded Materials with Opti-mal Coefficients [Volume 6, Issue 2, 2019, Pages 167-179]
  • Shahriari, Behrooz Stress Analysis of FGM Rotating Disk Subjected to Mechanical and Thermal Loads in Aircraft Gas Turbine Engine [(Articles in Press)]
  • Shakooeea, F. Synthesis and Characterization of Polymer/Nanosilicagel Nano-composites [Volume 4, Issue 1, 2017, Pages 1-8]
  • Shakouri, M. Dynamic Characteristics of Joined Steel and Carbon Fiber-Reinforced Plastic Tubes: Experimental and Numerical Investigation [Volume 4, Issue 2, 2017, Pages 88-97]
  • Shariati, Mahmoud Experimental Study on Amine-Functionalized Carbon Nanotubes’ Effect on the Thermomechanical Properties of CNT/Epoxy Nano-composites [Volume 5, Issue 1, 2018, Pages 41-48]
  • Shariati-Nia, Mostafa Modal Characteristics of Composite Beams with Single Delamination- A Simple Analytical Technique [Volume 1, Issue 2, 2014, Pages 97-106]
  • Shariyat, Mohammad The Effects of the Moving Load and the Attached Mass-Spring-Damper System Interactions on the Dynamic Responses of the Composite Plates: An Analytical Approach [Volume 2, Issue 1, 2015, Pages 17-30]
  • Shelesh-Nezhad, Karim A Study of the Effect of TPU and Clay Nanoparticles on the Mechanical Behavior of PBT-Based Nanocomposites [Volume 4, Issue 3, 2017, Pages 179-186]
  • Shelesh-Nezhad, Karim Numerical Simulation of a Hybrid Nanocomposite Containing Ca-CO3 and Short Glass Fibers Subjected to Tensile Loading [Volume 4, Issue 2, 2017, Pages 117-125]
  • Shinde, Bharti M. A Quasi-3D Polynomial Shear and Normal Deformation Theory for Laminated Composite, Sandwich, and Functionally Graded Beams [Volume 4, Issue 2, 2017, Pages 139-152]
  • Shirdel, Hadi Optimization of Hybrid Composite Laminate Based on the Frequency using Imperialist Competitive Algorithm [Volume 1, Issue 1, 2014, Pages 37-48]
  • Shivaprasad, Veena Mechanical Characterization and Wear Behavior of Nano TiO2 Particulates Reinforced Al7075 Alloy Composites [(Articles in Press)]
  • Shokrian, Minoo Dokht Numerical Simulation of a Hybrid Nanocomposite Containing Ca-CO3 and Short Glass Fibers Subjected to Tensile Loading [Volume 4, Issue 2, 2017, Pages 117-125]
  • Shokrieh, M. Size Effect on the Damaged Areas of Glass/Epoxy Structures under Low Velocity Impact [Volume 1, Issue 2, 2014, Pages 81-85]
  • Shokrieh, Mahmood Mehrdad Mechanical Properties of Graphene/Epoxy Nanocomposites under Static and Flexural Fatigue Loadings [Volume 1, Issue 1, 2014, Pages 1-7]
  • Siadati, S.M.H. Flexural Behavior of Fiber–Metal Laminates Reinforced with Surface-Functionalized Nanoclay [Volume 5, Issue 2, 2018, Pages 149-156]
  • Sohrabi, Habib Using the Taguchi Method for Experimental and Numerical Investigations on the Square-Cup Deep-Drawing Process for Aluminum/Steel Laminated Sheets [Volume 4, Issue 2, 2017, Pages 169-177]
  • Soleimanian, Sina Theoretical, numerical, and experimental analyses of free vibrations of glass fiber reinforced polymer plates with central cutouts and free boundaries [Volume 5, Issue 1, 2018, Pages 67-74]
  • Soleimanian, Sina Thermal Buckling and Thermal Induced Free Vibration Analysis of Perforated Composite Plates: A Mathematical Model [(Articles in Press)]
  • Soltani, Mohammad-Reza Dynamic Stiffness Method for Free Vibration of Moderately Thick Functionally Graded Plates [Volume 3, Issue 1, 2016, Pages 15-30]
  • Sur, Abhik Elasto-Thermodiffusive Response in a Two-Dimensional Transversely Isotropic Medium [Volume 6, Issue 2, 2019, Pages 95-104]
  • Sur, Abhik Thermoelastic Interaction in a Three-Dimensional Layered Sandwich Structure [Volume 5, Issue 2, 2018, Pages 187-198]

T

  • Taherian, Z. The Effect of Processing Conditions on the Mechanical Properties of Polypropylene/Mesoporous Silica-Hydroxyapatite Hybrid Nanocomposites [Volume 3, Issue 2, 2016, Pages 73-82]
  • Taheri-Behrooz, F. Size Effect on the Damaged Areas of Glass/Epoxy Structures under Low Velocity Impact [Volume 1, Issue 2, 2014, Pages 81-85]
  • Tahouneh, Vahid A Semi-analytical Solution for 3-D Dynamic Analysis of Thick Continuously Graded Carbon Nanotube-reinforced Annular Plates Resting on a Two-parameter Elastic Foundation [Volume 1, Issue 2, 2014, Pages 113-130]
  • Tahouneh, Vahid Three-dimensional elasticity solution for vibrational analysis of thick continuously graded sandwich plates with different boundary conditions using a two-parameter micromechanical model for agglomeration [Volume 5, Issue 1, 2018, Pages 49-66]
  • Tajali, Mohammad Synthesis and Characterization of Polymer/Nanosilicagel Nano-composites [Volume 4, Issue 1, 2017, Pages 1-8]
  • Takhayor Ardestani, Masoud The Effect of Temperature Dependency on the Thermo-Electro-Elastic Analysis of Functionally Graded Piezoelectric Spherical Shell [Volume 6, Issue 1, 2019, Pages 1-8]
  • Tarahomi, S. The Effect of Processing Conditions on the Mechanical Properties of Polypropylene/Mesoporous Silica-Hydroxyapatite Hybrid Nanocomposites [Volume 3, Issue 2, 2016, Pages 73-82]
  • Torabi, Keivan Transverse Vibration for Non-uniform Timoshenko Nano-beams [Volume 2, Issue 1, 2015, Pages 1-16]
  • Torabi, Keyvan Modal Characteristics of Composite Beams with Single Delamination- A Simple Analytical Technique [Volume 1, Issue 2, 2014, Pages 97-106]
  • Torabizadeh, Mohammad Amin A Numerical and Analytical Solution for the Free Vibration of Laminated Composites Using Different Plate Theories [Volume 4, Issue 1, 2017, Pages 75-87]

V

  • Vahedi, Sh. Flexural Behavior of Fiber–Metal Laminates Reinforced with Surface-Functionalized Nanoclay [Volume 5, Issue 2, 2018, Pages 149-156]
  • Vossough, Ali Reza Nonlinear Magneto-Nonlocal Vibration Analysis of Coupled Piezoelectric Micro-Plates Reinforced with Agglomerated CNTs [(Articles in Press)]
  • Vossough, Hossein Nonlinear Magneto-Nonlocal Vibration Analysis of Coupled Piezoelectric Micro-Plates Reinforced with Agglomerated CNTs [(Articles in Press)]

Y

  • Yousefi, Ali-Akbar On the Study of Mechanical Properties of Aluminum/Nano-Alumina Composites Produced via Powder Injection Molding [Volume 3, Issue 1, 2016, Pages 45-51]
  • Yousefi, Shahram Thermoelastic Analysis of Compressor Spool in Turbojet Engine and Redesign it Using Functionally Graded Materials with Opti-mal Coefficients [Volume 6, Issue 2, 2019, Pages 167-179]
  • Yousefpoar, Mardali Synthesis and Characterization of Polymer/Nanosilicagel Nano-composites [Volume 4, Issue 1, 2017, Pages 1-8]

Z

  • Zamani, Mohammad Reza Theoretical, numerical, and experimental analyses of free vibrations of glass fiber reinforced polymer plates with central cutouts and free boundaries [Volume 5, Issue 1, 2018, Pages 67-74]
  • Zamani, Mohammad Reza Thermal Buckling and Thermal Induced Free Vibration Analysis of Perforated Composite Plates: A Mathematical Model [(Articles in Press)]
  • Zamani, M.R. Free Vibration of Lattice Cylindrical Composite Shell Reinforced with Carbon Nano-tubes [Volume 2, Issue 1, 2015, Pages 61-72]
  • Zamani, M.R. The Effect of External Skin on Buckling Strength of Composite Lattice Cylinders Based on Numerical and Experimental Analysis [Volume 3, Issue 2, 2016, Pages 83-87]