Keyword Index

A

  • Abaqus analysis Delamination Analysis in Composite Root of a Carbon-Layer Reinforced Wind Turbine Blade [Volume 6, Issue 1, 2019, Pages 9-18]
  • Accelerated heat aging Accelerated Heat Aging Study of Phenolic/Basalt Fiber Reinforced Composites [Volume 3, Issue 1, 2016, Pages 1-7]
  • Accumulative roll bonding Effects of reinforcement distribution on the mechanical properties of Al–Fe3O4 nanocomposites fabricated via accumulative roll bonding [Volume 5, Issue 2, 2018, Pages 131-139]
  • Acoustic emission Damage Energy Evaluation in [55/-55]9 Composite Pipes using Acoustic Emission Method [Volume 2, Issue 2, 2015, Pages 127-134]
  • Acoustic emission Health Monitoring for Composite under Low-Cycle Cyclic Loading, Considering Effects of Acoustic Emission Sensor Type [Volume 6, Issue 1, 2019, Pages 19-26]
  • Acrylonitrile Butadiene Styrene Study on Compression and Flexural Behavior of ABS-SiO2 Poly-mer Matrix Composite Fabricated by Hot Extrusion [Volume 6, Issue 2, 2019, Pages 239-247]
  • Adaptive PSO Algorithm Vibration Optimization of Fiber-Metal Laminated Composite Shallow Shell Panels Using an Adaptive PSO Algorithm [Volume 4, Issue 2, 2017, Pages 99-110]
  • Additive Improving the Performance of Porous Concrete Composites Using Zeolite as a Coarse Grain [Volume 5, Issue 2, 2018, Pages 157-163]
  • Adherend Semi Analytical Transient Dynamic Analysis of Composite Adhesive Single-lap Joints [(Articles in Press)]
  • Adhesive joint Semi Analytical Transient Dynamic Analysis of Composite Adhesive Single-lap Joints [(Articles in Press)]
  • Advanced composite An Analytical Approach to Thermoelastic Bending of Simply Supported Advanced Ribbed Composite Plates [Volume 5, Issue 2, 2018, Pages 173-185]
  • Age hardening Effect of Aging on Fracture Toughness of Al6061-Graphite Particulate Composites [Volume 6, Issue 2, 2019, Pages 139-146]
  • Agglomerated CNTs Nonlinear Magneto-Nonlocal Vibration Analysis of Coupled Piezoelectric Micro-Plates Reinforced with Agglomerated CNTs [(Articles in Press)]
  • Aggregated carbon nanotubes Free Vibration and Buckling Analyses of Functionally Graded Nanocomposite Plates Reinforced by Carbon Nanotube [Volume 4, Issue 1, 2017, Pages 59-73]
  • Aircraft gas turbine Stress Analysis of FGM Rotating Disk Subjected to Mechanical and Thermal Loads in Aircraft Gas Turbine Engine [(Articles in Press)]
  • Al6061-9%graphite Effect of Aging on Fracture Toughness of Al6061-Graphite Particulate Composites [Volume 6, Issue 2, 2019, Pages 139-146]
  • Al7075 Alloy Mechanical Characterization and Wear Behavior of Nano TiO2 Particulates Reinforced Al7075 Alloy Composites [(Articles in Press)]
  • Al/B4C nanocomposite Effect of Particle Size on the Structural and Mechanical Properties of Al–AlN Nanocomposites Fabricated by Mechanical Alloying [Volume 2, Issue 2, 2015, Pages 73-78]
  • Al/B4C nano-composite The Structural and Mechanical Properties of Al-2.5%wt. B4C Met-al Matrix Nano-composite Fabricated by the Mechanical Alloying [Volume 2, Issue 1, 2015, Pages 39-44]
  • Al matrix nanocomposite A Case Study for Fabrication of MWCNT-TiO2 Hybrid Reinforced Aluminium Matrix Nanocomposites [Volume 1, Issue 2, 2014, Pages 107-111]
  • Al–MWCNT-TiO2 A Case Study for Fabrication of MWCNT-TiO2 Hybrid Reinforced Aluminium Matrix Nanocomposites [Volume 1, Issue 2, 2014, Pages 107-111]
  • Alumina Sintered Steel Composites Reinforced with Ceramic Nanoparticles: Fabrication, Characteristics and Wear Behavior [Volume 6, Issue 2, 2019, Pages 191-200]
  • Aluminum matrix composite On the Study of Mechanical Properties of Aluminum/Nano-Alumina Composites Produced via Powder Injection Molding [Volume 3, Issue 1, 2016, Pages 45-51]
  • Analytical method A Numerical and Analytical Solution for the Free Vibration of Laminated Composites Using Different Plate Theories [Volume 4, Issue 1, 2017, Pages 75-87]
  • Analytical method Analytical Approach for Thermo-electro-mechanical Vibration of Piezoelectric Nanoplates Resting on Elastic Foundations based on Nonlocal Theory [Volume 6, Issue 2, 2019, Pages 117-129]
  • Analytical modelling Free Natural Frequency Analysis of an FG Composite Rectangular Plate Coupled with Fluid using Rayleigh–Ritz Method [Volume 1, Issue 2, 2014, Pages 131-143]
  • Analytical Solution On the Buckling the Behavior of a Multiphase Smart Plate based on a Higher-order Theory [Volume 4, Issue 1, 2017, Pages 47-58]
  • Analytical Solution Optimization of infinite composite plates with quasi-triangular holes under in-plane loading [Volume 5, Issue 2, 2018, Pages 115-130]
  • Annular plate Free Vibration Analysis of 2D Functionally Graded Annular Plate considering the Effect of Material Composition via 2D Differential Quadrature Method [Volume 2, Issue 2, 2015, Pages 95-111]
  • Annular plates A Semi-analytical Solution for 3-D Dynamic Analysis of Thick Continuously Graded Carbon Nanotube-reinforced Annular Plates Resting on a Two-parameter Elastic Foundation [Volume 1, Issue 2, 2014, Pages 113-130]
  • Artificial spring Free Vibration Analysis of Composite Plates with Artificial Springs by Trigonometric Ritz Method [Volume 1, Issue 1, 2014, Pages 61-70]
  • Attached mass-spring system Moving load The Effects of the Moving Load and the Attached Mass-Spring-Damper System Interactions on the Dynamic Responses of the Composite Plates: An Analytical Approach [Volume 2, Issue 1, 2015, Pages 17-30]
  • Axial compression Experimental Study on Double-Walled Copper and Carbon/Epoxy Composite Tubes under the Axial Loading [Volume 1, Issue 2, 2014, Pages 71-79]

B

  • Bagasse The Role of Natural Additives on the Wear and Friction Proper-ties of Nanocomposites for Friction Applications [Volume 6, Issue 2, 2019, Pages 159-165]
  • Ballistic impact Investigation into The Behavior of Nano-composite Tubes at Ballistic Impact [Volume 4, Issue 3, 2017, Pages 207-210]
  • Basalt Compression Analysis of Hollow Cylinder Basalt Continuous Filament Epoxy Composite Filled with Shape Memory Wire [Volume 4, Issue 3, 2017, Pages 225-232]
  • Basalt fiber Accelerated Heat Aging Study of Phenolic/Basalt Fiber Reinforced Composites [Volume 3, Issue 1, 2016, Pages 1-7]
  • Basic functions Modal Characteristics of Composite Beams with Single Delamination- A Simple Analytical Technique [Volume 1, Issue 2, 2014, Pages 97-106]
  • Beam modal function model Discrepancies Between Free Vibration of FML and Composite Cylindrical Shells Reinforced by CNTs [Volume 6, Issue 2, 2019, Pages 105-115]
  • Biaxial buckling and bending Biaxial Buckling and Bending of Smart Nanocomposite Plate Reinforced by CNTs using Extended Mixture Rule Approach [Volume 1, Issue 1, 2014, Pages 17-26]
  • Biocompatible polymer Synthesis and Characterization of Polymer/Nanosilicagel Nano-composites [Volume 4, Issue 1, 2017, Pages 1-8]
  • Boundary Layer Mechanical Properties of Graphene/Epoxy Nanocomposites under Static and Flexural Fatigue Loadings [Volume 1, Issue 1, 2014, Pages 1-7]
  • Boundary Layer An Analytical Study on Effects of adding Nanoparticles to Water and Enhancement in Thermal Properties Based on Falkner-Skan Model [Volume 1, Issue 1, 2014, Pages 27-35]
  • Boundary Layer Elasticity Solution of Functionally Graded Carbon Nanotube Reinforced Composite Cylindrical Panel [Volume 1, Issue 1, 2014, Pages 49-60]
  • Buckling Buckling Analysis of Spherical Composite Panels Reinforced by Carbon Nanotube [Volume 2, Issue 2, 2015, Pages 135-144]
  • Buckling Investigation of Buckling Analysis of Epoxy/ Nanoclay/ Carbon Fiber Hybrid Laminated Nanocomposite: Using VARTM Technique for Preparation [Volume 3, Issue 1, 2016, Pages 63-71]
  • Buckling The Effect of External Skin on Buckling Strength of Composite Lattice Cylinders Based on Numerical and Experimental Analysis [Volume 3, Issue 2, 2016, Pages 83-87]
  • Buckling Free Vibration and Buckling Analyses of Functionally Graded Nanocomposite Plates Reinforced by Carbon Nanotube [Volume 4, Issue 1, 2017, Pages 59-73]
  • Buckling Bending, buckling and free vibration responses of hyperbolic shear deformable FGM beams [Volume 5, Issue 1, 2018, Pages 13-24]
  • Buckling load On the Buckling the Behavior of a Multiphase Smart Plate based on a Higher-order Theory [Volume 4, Issue 1, 2017, Pages 47-58]

C

  • Cable Nonlinear Vibration Analysis of the Composite Cable using Perturbation Method and the Green-Lagrangian Nonlinear Strain [Volume 6, Issue 1, 2019, Pages 27-34]
  • Capillary pressure Capillary Effects on Surface Enhancement in a Non-Homogeneous Fibrous Porous Medium [Volume 5, Issue 1, 2018, Pages 83-90]
  • Carbon/epoxy composite tubes Experimental Study on Double-Walled Copper and Carbon/Epoxy Composite Tubes under the Axial Loading [Volume 1, Issue 2, 2014, Pages 71-79]
  • Carbon fiber Investigation of Buckling Analysis of Epoxy/ Nanoclay/ Carbon Fiber Hybrid Laminated Nanocomposite: Using VARTM Technique for Preparation [Volume 3, Issue 1, 2016, Pages 63-71]
  • Carbon fibre Improving Mechanical Properties of Nanocomposite-based Epoxy by High-impact Polystyrene and Multiwalled Carbon Nanotubes: Optimizing by a Mixture Design Approach [Volume 4, Issue 1, 2017, Pages 33-45]
  • Carbon nanotube Predicting Young’s Modulus of Aggregated Carbon Nanotube Reinforced Polymer [Volume 1, Issue 1, 2014, Pages 9-16]
  • Carbon nanotube Elasticity Solution of Functionally Graded Carbon Nanotube Reinforced Composite Cylindrical Panel [Volume 1, Issue 1, 2014, Pages 49-60]
  • Carbon nanotube Distribution of Residual Stresses in Polymer Reinforced Carbon Nanotubes and Laminated Carbon Fibers [Volume 4, Issue 1, 2017, Pages 9-18]
  • Carbon nanotube-reinforced Buckling Analysis of Spherical Composite Panels Reinforced by Carbon Nanotube [Volume 2, Issue 2, 2015, Pages 135-144]
  • Carbon nanotubes Mechanical Properties of CNT-Reinforced Polymer Nano-composites: A Molecular Dynamics Study [Volume 3, Issue 2, 2016, Pages 113-121]
  • Carbon nanotubes Experimental Study on Amine-Functionalized Carbon Nanotubes’ Effect on the Thermomechanical Properties of CNT/Epoxy Nano-composites [Volume 5, Issue 1, 2018, Pages 41-48]
  • Carbon nano-tubes Free Vibration of Lattice Cylindrical Composite Shell Reinforced with Carbon Nano-tubes [Volume 2, Issue 1, 2015, Pages 61-72]
  • Casting Evaluation of hardness and wear resistance of nano-sized titanium-carbide-reinforced commercially cast aluminum alloy matrices [Volume 5, Issue 1, 2018, Pages 75-81]
  • CFRP Failure Pressure Prediction of Semi Spherical GFRP Shells in Thermal Environment [(Articles in Press)]
  • Circular copper tubes Experimental Study on Double-Walled Copper and Carbon/Epoxy Composite Tubes under the Axial Loading [Volume 1, Issue 2, 2014, Pages 71-79]
  • Circular cylindrical shells A New Three-Dimensional Refined Higher-Order Theory for Free Vibration Analysis of Composite Circular Cylindrical Shells [Volume 6, Issue 2, 2019, Pages 201-223]
  • Circular plates Analytical Solution for Sound Radiation of Vibrating Circular Plates coupled with Piezo-electric Layers [Volume 3, Issue 2, 2016, Pages 89-98]
  • Classical plate theory Biaxial Buckling and Bending of Smart Nanocomposite Plate Reinforced by CNTs using Extended Mixture Rule Approach [Volume 1, Issue 1, 2014, Pages 17-26]
  • Classical plate theory Analytical Solution for Sound Radiation of Vibrating Circular Plates coupled with Piezo-electric Layers [Volume 3, Issue 2, 2016, Pages 89-98]
  • CNT In Situ Formation of SiC/CNT Ceramic Nanocomposite by Phenolic Pyrolysis [Volume 1, Issue 2, 2014, Pages 87-96]
  • CNTs Discrepancies Between Free Vibration of FML and Composite Cylindrical Shells Reinforced by CNTs [Volume 6, Issue 2, 2019, Pages 105-115]
  • Cohesive zone model Delamination Analysis in Composite Root of a Carbon-Layer Reinforced Wind Turbine Blade [Volume 6, Issue 1, 2019, Pages 9-18]
  • Complex variable method Optimization of infinite composite plates with quasi-triangular holes under in-plane loading [Volume 5, Issue 2, 2018, Pages 115-130]
  • Composite Modeling of Hygrothermal Damage of Composite Materials [Volume 3, Issue 2, 2016, Pages 137-144]
  • Composite A New Three-Dimensional Refined Higher-Order Theory for Free Vibration Analysis of Composite Circular Cylindrical Shells [Volume 6, Issue 2, 2019, Pages 201-223]
  • Composite Nonlinear Vibration Analysis of the Composite Cable using Perturbation Method and the Green-Lagrangian Nonlinear Strain [Volume 6, Issue 1, 2019, Pages 27-34]
  • Composite Crushing Analysis of Empty and Foam-Filled Cylindrical and Conical Corrugated Composite Tubes [Volume 6, Issue 1, 2019, Pages 35-44]
  • Composite beams Modal Characteristics of Composite Beams with Single Delamination- A Simple Analytical Technique [Volume 1, Issue 2, 2014, Pages 97-106]
  • Composite cylindrical shell Investigation into The Behavior of Nano-composite Tubes at Ballistic Impact [Volume 4, Issue 3, 2017, Pages 207-210]
  • Composite frame of RCS Investigation of Nonlinear Behavior of Composite Bracing Structures with Concrete Columns and Steel Beams (RCS) Using Finite Element Method [(Articles in Press)]
  • Composite laminate Optimization of Hybrid Composite Laminate Based on the Frequency using Imperialist Competitive Algorithm [Volume 1, Issue 1, 2014, Pages 37-48]
  • Composite plate The Effects of the Moving Load and the Attached Mass-Spring-Damper System Interactions on the Dynamic Responses of the Composite Plates: An Analytical Approach [Volume 2, Issue 1, 2015, Pages 17-30]
  • Composite plates Free Vibration Analysis of Composite Plates with Artificial Springs by Trigonometric Ritz Method [Volume 1, Issue 1, 2014, Pages 61-70]
  • Composite structure Health Monitoring for Composite under Low-Cycle Cyclic Loading, Considering Effects of Acoustic Emission Sensor Type [Volume 6, Issue 1, 2019, Pages 19-26]
  • Compression Compression Analysis of Hollow Cylinder Basalt Continuous Filament Epoxy Composite Filled with Shape Memory Wire [Volume 4, Issue 3, 2017, Pages 225-232]
  • Compression Study on Compression and Flexural Behavior of ABS-SiO2 Poly-mer Matrix Composite Fabricated by Hot Extrusion [Volume 6, Issue 2, 2019, Pages 239-247]
  • Compressive Properties Effects of Nanotube/Matrix Interface on Multi-Walled Carbon Nanotube Reinforced Polymer Mechanical Properties [Volume 4, Issue 3, 2017, Pages 211-223]
  • Compressive Strength A Comparative Study on the Microstructure and Mechanical Prop-erties of Al-Si-Cu/1wt %NCP composites after T6 Heat Treatment [(Articles in Press)]
  • Compressor Spool Thermoelastic Analysis of Compressor Spool in Turbojet Engine and Redesign it Using Functionally Graded Materials with Opti-mal Coefficients [Volume 6, Issue 2, 2019, Pages 167-179]
  • Concrete Experimental investigation of the strength of glass fiber-reinforced concrete exposed to high temperature [Volume 5, Issue 2, 2018, Pages 103-113]
  • Connector Constraint Effects of Nanotube/Matrix Interface on Multi-Walled Carbon Nanotube Reinforced Polymer Mechanical Properties [Volume 4, Issue 3, 2017, Pages 211-223]
  • Continuously graded carbon nanotube-reinforced A Semi-analytical Solution for 3-D Dynamic Analysis of Thick Continuously Graded Carbon Nanotube-reinforced Annular Plates Resting on a Two-parameter Elastic Foundation [Volume 1, Issue 2, 2014, Pages 113-130]
  • Corrugated core Improving the Performance of the Sandwich Panel with the Corrugated Core Filled with Metal Foam: Mathematical and Numerical Methods [Volume 6, Issue 2, 2019, Pages 249-261]
  • Coupled system Nonlinear Magneto-Nonlocal Vibration Analysis of Coupled Piezoelectric Micro-Plates Reinforced with Agglomerated CNTs [(Articles in Press)]
  • Couple stress theory Free Vibration Analysis of Size-Dependent, Functionally Graded, Rectangular Nano/Micro-plates based on Modified Nonlinear Couple Stress Shear Deformation Plate Theories [Volume 4, Issue 2, 2017, Pages 127-137]
  • Crashworthiness Numerical Crashworthiness Analysis of Graded Layered Foam- Filled Tubes Under Axial Loading [Volume 6, Issue 1, 2019, Pages 57-64]
  • CT specimens Effect of Aging on Fracture Toughness of Al6061-Graphite Particulate Composites [Volume 6, Issue 2, 2019, Pages 139-146]
  • Curing Cured Poly(ethylene-g-maleic anhydride)/Graphene Nanocomposite: Properties and Characterization [Volume 5, Issue 1, 2018, Pages 1-12]
  • Curved graphene Effect of Curvature on the Mechanical Properties of Graphene: A Density Functional Tight-binding Approach [Volume 3, Issue 1, 2016, Pages 9-13]
  • Cutout Theoretical, numerical, and experimental analyses of free vibrations of glass fiber reinforced polymer plates with central cutouts and free boundaries [Volume 5, Issue 1, 2018, Pages 67-74]
  • Cylindrical and Conical Corrugated Tubes Crushing Analysis of Empty and Foam-Filled Cylindrical and Conical Corrugated Composite Tubes [Volume 6, Issue 1, 2019, Pages 35-44]
  • Cylindrical panel Elasticity Solution of Functionally Graded Carbon Nanotube Reinforced Composite Cylindrical Panel [Volume 1, Issue 1, 2014, Pages 49-60]
  • Cylindrical shell Dynamic Characteristics of Joined Steel and Carbon Fiber-Reinforced Plastic Tubes: Experimental and Numerical Investigation [Volume 4, Issue 2, 2017, Pages 88-97]

D

  • Damaged area Size Effect on the Damaged Areas of Glass/Epoxy Structures under Low Velocity Impact [Volume 1, Issue 2, 2014, Pages 81-85]
  • Damage law Modeling of Hygrothermal Damage of Composite Materials [Volume 3, Issue 2, 2016, Pages 137-144]
  • DCP Curing Cured Poly(ethylene-g-maleic anhydride)/Graphene Nanocomposite: Properties and Characterization [Volume 5, Issue 1, 2018, Pages 1-12]
  • DCPD Investigation of Capsulated Epoxy and DCPD in Epoxy Based Self-healing Composites - DFT Calculation and Experimental Analysis [Volume 5, Issue 2, 2018, Pages 165-171]
  • Deep drawing Using the Taguchi Method for Experimental and Numerical Investigations on the Square-Cup Deep-Drawing Process for Aluminum/Steel Laminated Sheets [Volume 4, Issue 2, 2017, Pages 169-177]
  • Defect Effect of Curvature on the Mechanical Properties of Graphene: A Density Functional Tight-binding Approach [Volume 3, Issue 1, 2016, Pages 9-13]
  • Delamination Propagation of Matrix Cracking and Induced Delaminatin in Cross-Ply Composite Beams Subjected to Bending Loads [Volume 6, Issue 1, 2019, Pages 45-50]
  • Delamination Delamination Analysis in Composite Root of a Carbon-Layer Reinforced Wind Turbine Blade [Volume 6, Issue 1, 2019, Pages 9-18]
  • Delamination detection Modal Characteristics of Composite Beams with Single Delamination- A Simple Analytical Technique [Volume 1, Issue 2, 2014, Pages 97-106]
  • Density functional tight-binding Effect of Curvature on the Mechanical Properties of Graphene: A Density Functional Tight-binding Approach [Volume 3, Issue 1, 2016, Pages 9-13]
  • DFT Investigation of Capsulated Epoxy and DCPD in Epoxy Based Self-healing Composites - DFT Calculation and Experimental Analysis [Volume 5, Issue 2, 2018, Pages 165-171]
  • Displacement control Mechanical Properties of Graphene/Epoxy Nanocomposites under Static and Flexural Fatigue Loadings [Volume 1, Issue 1, 2014, Pages 1-7]
  • Division method The Effect of Temperature Dependency on the Thermo-Electro-Elastic Analysis of Functionally Graded Piezoelectric Spherical Shell [Volume 6, Issue 1, 2019, Pages 1-8]
  • DQM Size-dependent Effects on the Vibration Behavior of a Ti-moshenko Microbeam subjected to Pre-stress Loading based on DQM [Volume 3, Issue 2, 2016, Pages 99-112]
  • DQM Nonlinear Magneto-Nonlocal Vibration Analysis of Coupled Piezoelectric Micro-Plates Reinforced with Agglomerated CNTs [(Articles in Press)]
  • Dual-phase-lag thermoelastic model Thermoelastic Interaction in a Three-Dimensional Layered Sandwich Structure [Volume 5, Issue 2, 2018, Pages 187-198]
  • Dynamic response The Effects of the Moving Load and the Attached Mass-Spring-Damper System Interactions on the Dynamic Responses of the Composite Plates: An Analytical Approach [Volume 2, Issue 1, 2015, Pages 17-30]
  • Dynamic Stability Influence of Hygrothermal environment and FG material on natural frequency and parametric instability of Plates [(Articles in Press)]
  • Dynamic stiffness method Dynamic Stiffness Method for Free Vibration of Moderately Thick Functionally Graded Plates [Volume 3, Issue 1, 2016, Pages 15-30]

E

  • Effective matrix Numerical Simulation of a Hybrid Nanocomposite Containing Ca-CO3 and Short Glass Fibers Subjected to Tensile Loading [Volume 4, Issue 2, 2017, Pages 117-125]
  • Elastic foundation Nonlocal Buckling and Vibration Analysis of Triple-Walled ZnO Piezoelectric Timoshenko Nano-beam Subjected to Magneto-Electro-Thermo-Mechanical Loadings [Volume 2, Issue 2, 2015, Pages 113-126]
  • Elastic foundation Analytical Approach for Thermo-electro-mechanical Vibration of Piezoelectric Nanoplates Resting on Elastic Foundations based on Nonlocal Theory [Volume 6, Issue 2, 2019, Pages 117-129]
  • Elasticity Elasticity Solution of Functionally Graded Carbon Nanotube Reinforced Composite Cylindrical Panel [Volume 1, Issue 1, 2014, Pages 49-60]
  • Elastic medium A novel method for considering interlayer effects between graphene nanoribbons and elastic medium in free vibration analysis [(Articles in Press)]
  • Electro-magneto-mechanical loadings Biaxial Buckling and Bending of Smart Nanocomposite Plate Reinforced by CNTs using Extended Mixture Rule Approach [Volume 1, Issue 1, 2014, Pages 17-26]
  • Energy Absorption, Aluminum Foam Crushing Analysis of Empty and Foam-Filled Cylindrical and Conical Corrugated Composite Tubes [Volume 6, Issue 1, 2019, Pages 35-44]
  • Epoxy Investigation of Capsulated Epoxy and DCPD in Epoxy Based Self-healing Composites - DFT Calculation and Experimental Analysis [Volume 5, Issue 2, 2018, Pages 165-171]
  • Euler-Bernoulli theory A novel method for considering interlayer effects between graphene nanoribbons and elastic medium in free vibration analysis [(Articles in Press)]
  • Exact solution Dynamic Stiffness Method for Free Vibration of Moderately Thick Functionally Graded Plates [Volume 3, Issue 1, 2016, Pages 15-30]
  • Experimental investigation Experimental investigation of the strength of glass fiber-reinforced concrete exposed to high temperature [Volume 5, Issue 2, 2018, Pages 103-113]
  • Experimental Study The Effect of Processing Conditions on the Mechanical Properties of Polypropylene/Mesoporous Silica-Hydroxyapatite Hybrid Nanocomposites [Volume 3, Issue 2, 2016, Pages 73-82]
  • Exponential shear deformation theory Fluid-Structure Interaction of Vibrating Composite Piezoelectric Plates using exponential shear deformation theory [(Articles in Press)]
  • Exponential shear deformation theory Free Vibrations Analysis of Functionally Graded Rectangular Nano-plates based on Nonlocal Exponential Shear Deformation Theory [Volume 2, Issue 2, 2015, Pages 79-93]
  • Extrusion Study on Compression and Flexural Behavior of ABS-SiO2 Poly-mer Matrix Composite Fabricated by Hot Extrusion [Volume 6, Issue 2, 2019, Pages 239-247]

F

  • Failure mechanisms Damage Energy Evaluation in [55/-55]9 Composite Pipes using Acoustic Emission Method [Volume 2, Issue 2, 2015, Pages 127-134]
  • Failure Pressure Failure Pressure Prediction of Semi Spherical GFRP Shells in Thermal Environment [(Articles in Press)]
  • Falkner-skan An Analytical Study on Effects of adding Nanoparticles to Water and Enhancement in Thermal Properties Based on Falkner-Skan Model [Volume 1, Issue 1, 2014, Pages 27-35]
  • Fe3O4 Effects of reinforcement distribution on the mechanical properties of Al–Fe3O4 nanocomposites fabricated via accumulative roll bonding [Volume 5, Issue 2, 2018, Pages 131-139]
  • FEM The Effect of External Skin on Buckling Strength of Composite Lattice Cylinders Based on Numerical and Experimental Analysis [Volume 3, Issue 2, 2016, Pages 83-87]
  • FG bio-micro-beam Vibration characteristics of functionally graded micro-beam carrying an attached mass [(Articles in Press)]
  • FG composite Free Natural Frequency Analysis of an FG Composite Rectangular Plate Coupled with Fluid using Rayleigh–Ritz Method [Volume 1, Issue 2, 2014, Pages 131-143]
  • FGM Elastic analysis of Shrink-fitted Thick FGM Cylinders Based on Linear Plane Elasticity Theory [(Articles in Press)]
  • FGM beam Bending, buckling and free vibration responses of hyperbolic shear deformable FGM beams [Volume 5, Issue 1, 2018, Pages 13-24]
  • FGPM Transient Thermal Stresses Analysis in a FPGM Cylinder [Volume 6, Issue 2, 2019, Pages 81-94]
  • Fiber Metal Laminate Vibration Optimization of Fiber-Metal Laminated Composite Shallow Shell Panels Using an Adaptive PSO Algorithm [Volume 4, Issue 2, 2017, Pages 99-110]
  • Fiber-metal laminates Flexural Behavior of Fiber–Metal Laminates Reinforced with Surface-Functionalized Nanoclay [Volume 5, Issue 2, 2018, Pages 149-156]
  • Fiber metal laminates (FMLs) Environmental Effects on Mechanical Properties of Glass/Epoxy and Fiber Metal Laminates, Part I: Hygrothermal Aging [Volume 4, Issue 3, 2017, Pages 187-196]
  • Fiber metal laminates (FMLs) Environmental effects on mechanical properties of glass/epoxy and fiber metal laminates, Part II: Isothermal aging [Volume 4, Issue 3, 2017, Pages 197-205]
  • Fick’s law Modeling of Hygrothermal Damage of Composite Materials [Volume 3, Issue 2, 2016, Pages 137-144]
  • Film temperature Atomic Simulation of Temperature Effect on the Mechanical Properties of Thin Films [Volume 2, Issue 1, 2015, Pages 31-38]
  • Finite element Capillary Effects on Surface Enhancement in a Non-Homogeneous Fibrous Porous Medium [Volume 5, Issue 1, 2018, Pages 83-90]
  • Finite element method (FEM) Modal Characteristics of Composite Beams with Single Delamination- A Simple Analytical Technique [Volume 1, Issue 2, 2014, Pages 97-106]
  • Finite element simulation Using the Taguchi Method for Experimental and Numerical Investigations on the Square-Cup Deep-Drawing Process for Aluminum/Steel Laminated Sheets [Volume 4, Issue 2, 2017, Pages 169-177]
  • Finite element, temperature Failure Pressure Prediction of Semi Spherical GFRP Shells in Thermal Environment [(Articles in Press)]
  • Finite strain Size-dependent Bending of Geometrically Nonlinear of Micro-Laminated Composite Beam based on Modified Couple Stress Theory [Volume 3, Issue 1, 2016, Pages 53-62]
  • Finite strip method Dynamic Stability of Moderately Thick Composite Laminated Skew Plates using Finite Strip Method [Volume 2, Issue 2, 2015, Pages 145-150]
  • Finite wave speed Elasto-Thermodiffusive Response in a Two-Dimensional Transversely Isotropic Medium [Volume 6, Issue 2, 2019, Pages 95-104]
  • Finite wave speed Thermoelastic Interaction in a Three-Dimensional Layered Sandwich Structure [Volume 5, Issue 2, 2018, Pages 187-198]
  • First-order shear deformation plate theory Non-Linear Analysis of Functionally Graded Sector Plates with Simply Supported Radial Edges Under Transverse Loading [Volume 6, Issue 1, 2019, Pages 65-74]
  • First-order shear deformation theory Dynamic Stiffness Method for Free Vibration of Moderately Thick Functionally Graded Plates [Volume 3, Issue 1, 2016, Pages 15-30]
  • First-order shear deformation theory Mesh-free Dynamic Analyses of FGM Sandwich Plates Resting on A Pasternak Elastic Foundation [Volume 4, Issue 2, 2017, Pages 153-168]
  • First-order shear deformation theory (FSDT) Thermoelastic analysis of a functionally graded simple blade using first-order shear deformation theory [(Articles in Press)]
  • Flexural Study on Compression and Flexural Behavior of ABS-SiO2 Poly-mer Matrix Composite Fabricated by Hot Extrusion [Volume 6, Issue 2, 2019, Pages 239-247]
  • Flexural bending fatigue Mechanical Properties of Graphene/Epoxy Nanocomposites under Static and Flexural Fatigue Loadings [Volume 1, Issue 1, 2014, Pages 1-7]
  • Flexural properties Environmental Effects on Mechanical Properties of Glass/Epoxy and Fiber Metal Laminates, Part I: Hygrothermal Aging [Volume 4, Issue 3, 2017, Pages 187-196]
  • Flexural properties Environmental effects on mechanical properties of glass/epoxy and fiber metal laminates, Part II: Isothermal aging [Volume 4, Issue 3, 2017, Pages 197-205]
  • Flexure Static Flexure of Soft Core Sandwich Beams using Trigonometric Shear Deformation Theory [Volume 2, Issue 1, 2015, Pages 45-53]
  • Fluid-structure interaction Fluid-Structure Interaction of Vibrating Composite Piezoelectric Plates using exponential shear deformation theory [(Articles in Press)]
  • FML and composite cylindrical shells Discrepancies Between Free Vibration of FML and Composite Cylindrical Shells Reinforced by CNTs [Volume 6, Issue 2, 2019, Pages 105-115]
  • Foaming conditions Influence of Different Foaming Conditions on the Mechanical, Physical, and Structural Properties of Polypropylene Foam [Volume 6, Issue 2, 2019, Pages 225-237]
  • Fractography Effects of reinforcement distribution on the mechanical properties of Al–Fe3O4 nanocomposites fabricated via accumulative roll bonding [Volume 5, Issue 2, 2018, Pages 131-139]
  • Fractography Mechanical Characterization and Wear Behavior of Nano TiO2 Particulates Reinforced Al7075 Alloy Composites [(Articles in Press)]
  • Fracture surface Flexural Behavior of Fiber–Metal Laminates Reinforced with Surface-Functionalized Nanoclay [Volume 5, Issue 2, 2018, Pages 149-156]
  • Fracture toughness Effect of Aging on Fracture Toughness of Al6061-Graphite Particulate Composites [Volume 6, Issue 2, 2019, Pages 139-146]
  • Free Boundaries Theoretical, numerical, and experimental analyses of free vibrations of glass fiber reinforced polymer plates with central cutouts and free boundaries [Volume 5, Issue 1, 2018, Pages 67-74]
  • Free surface Capillary Effects on Surface Enhancement in a Non-Homogeneous Fibrous Porous Medium [Volume 5, Issue 1, 2018, Pages 83-90]
  • Free vibration Free Vibration of Lattice Cylindrical Composite Shell Reinforced with Carbon Nano-tubes [Volume 2, Issue 1, 2015, Pages 61-72]
  • Free vibration Free Vibration Analysis of 2D Functionally Graded Annular Plate considering the Effect of Material Composition via 2D Differential Quadrature Method [Volume 2, Issue 2, 2015, Pages 95-111]
  • Free vibration Dynamic Stiffness Method for Free Vibration of Moderately Thick Functionally Graded Plates [Volume 3, Issue 1, 2016, Pages 15-30]
  • Free vibration Static and Free Vibration Analyses of Functionally Graded Nano-composite Plates Reinforced by Wavy Carbon Nanotubes Resting on a Pasternak Elastic Foundation [Volume 3, Issue 2, 2016, Pages 123-135]
  • Free vibration Free Vibration and Buckling Analyses of Functionally Graded Nanocomposite Plates Reinforced by Carbon Nanotube [Volume 4, Issue 1, 2017, Pages 59-73]
  • Free vibration Dynamic Characteristics of Joined Steel and Carbon Fiber-Reinforced Plastic Tubes: Experimental and Numerical Investigation [Volume 4, Issue 2, 2017, Pages 88-97]
  • Free vibration A Numerical and Analytical Solution for the Free Vibration of Laminated Composites Using Different Plate Theories [Volume 4, Issue 1, 2017, Pages 75-87]
  • Free vibration Theoretical, numerical, and experimental analyses of free vibrations of glass fiber reinforced polymer plates with central cutouts and free boundaries [Volume 5, Issue 1, 2018, Pages 67-74]
  • Free vibration Discrepancies Between Free Vibration of FML and Composite Cylindrical Shells Reinforced by CNTs [Volume 6, Issue 2, 2019, Pages 105-115]
  • Free vibration A New Three-Dimensional Refined Higher-Order Theory for Free Vibration Analysis of Composite Circular Cylindrical Shells [Volume 6, Issue 2, 2019, Pages 201-223]
  • Free vibration Thermal Buckling and Thermal Induced Free Vibration Analysis of Perforated Composite Plates: A Mathematical Model [(Articles in Press)]
  • Free vibration Influence of Hygrothermal environment and FG material on natural frequency and parametric instability of Plates [(Articles in Press)]
  • Frequency Optimization of Hybrid Composite Laminate Based on the Frequency using Imperialist Competitive Algorithm [Volume 1, Issue 1, 2014, Pages 37-48]
  • Frequency Analysis Vibration Analysis of Circular Single-Layer Graphene Sheet Using Finite Element Method [Volume 6, Issue 2, 2019, Pages 131-138]
  • Friction Materials The Role of Natural Additives on the Wear and Friction Proper-ties of Nanocomposites for Friction Applications [Volume 6, Issue 2, 2019, Pages 159-165]
  • Functional graded material Mesh-free Dynamic Analyses of FGM Sandwich Plates Resting on A Pasternak Elastic Foundation [Volume 4, Issue 2, 2017, Pages 153-168]
  • Functional graded materials Thermoelastic analysis of a functionally graded simple blade using first-order shear deformation theory [(Articles in Press)]
  • Functionalization Experimental Study on Amine-Functionalized Carbon Nanotubes’ Effect on the Thermomechanical Properties of CNT/Epoxy Nano-composites [Volume 5, Issue 1, 2018, Pages 41-48]
  • Functionally graded A Quasi-3D Polynomial Shear and Normal Deformation Theory for Laminated Composite, Sandwich, and Functionally Graded Beams [Volume 4, Issue 2, 2017, Pages 139-152]
  • Functionally graded Free Vibration Analysis of Size-Dependent, Functionally Graded, Rectangular Nano/Micro-plates based on Modified Nonlinear Couple Stress Shear Deformation Plate Theories [Volume 4, Issue 2, 2017, Pages 127-137]
  • Functionally graded beams An Investigation of Stress and Deformation Behavior of Functionally Graded Timoshenko Beams subjected to Thermo-Mechanical Load [(Articles in Press)]
  • Functionally graded materails Experimental Investigation of FGM Dental Implant Properties Made from Ti/HA Composite [Volume 4, Issue 3, 2017, Pages 233-237]
  • Functionally Graded Material Free Vibration Analysis of 2D Functionally Graded Annular Plate considering the Effect of Material Composition via 2D Differential Quadrature Method [Volume 2, Issue 2, 2015, Pages 95-111]
  • Functionally Graded Material Dynamic Stiffness Method for Free Vibration of Moderately Thick Functionally Graded Plates [Volume 3, Issue 1, 2016, Pages 15-30]
  • Functionally Graded Material Thermoelastic Analysis of Compressor Spool in Turbojet Engine and Redesign it Using Functionally Graded Materials with Opti-mal Coefficients [Volume 6, Issue 2, 2019, Pages 167-179]
  • Functionally Graded Material Plates Influence of Hygrothermal environment and FG material on natural frequency and parametric instability of Plates [(Articles in Press)]
  • Functionally graded materials Non-Linear Analysis of Functionally Graded Sector Plates with Simply Supported Radial Edges Under Transverse Loading [Volume 6, Issue 1, 2019, Pages 65-74]
  • Functionally graded nanoplates Free Vibrations Analysis of Functionally Graded Rectangular Nano-plates based on Nonlocal Exponential Shear Deformation Theory [Volume 2, Issue 2, 2015, Pages 79-93]
  • Functionally graded spherical shell The Effect of Temperature Dependency on the Thermo-Electro-Elastic Analysis of Functionally Graded Piezoelectric Spherical Shell [Volume 6, Issue 1, 2019, Pages 1-8]

G

  • Galerkin method Fluid-Structure Interaction of Vibrating Composite Piezoelectric Plates using exponential shear deformation theory [(Articles in Press)]
  • GDQEM Study of Laminated Composite MEMS and NEMS Performance in Nano Metric Operations [Volume 4, Issue 1, 2017, Pages 19-31]
  • GDQM Study of Laminated Composite MEMS and NEMS Performance in Nano Metric Operations [Volume 4, Issue 1, 2017, Pages 19-31]
  • Generalized differential quadrature Free Vibration Analysis of 2D Functionally Graded Annular Plate considering the Effect of Material Composition via 2D Differential Quadrature Method [Volume 2, Issue 2, 2015, Pages 95-111]
  • Generalized differential quadrature method Transverse Vibration for Non-uniform Timoshenko Nano-beams [Volume 2, Issue 1, 2015, Pages 1-16]
  • Generalized thermoelastic diffusion Elasto-Thermodiffusive Response in a Two-Dimensional Transversely Isotropic Medium [Volume 6, Issue 2, 2019, Pages 95-104]
  • Generalized thermoelasticity Thermoelastic Interaction in a Three-Dimensional Layered Sandwich Structure [Volume 5, Issue 2, 2018, Pages 187-198]
  • GFRP Plates Theoretical, numerical, and experimental analyses of free vibrations of glass fiber reinforced polymer plates with central cutouts and free boundaries [Volume 5, Issue 1, 2018, Pages 67-74]
  • Glass/epoxy composites Size Effect on the Damaged Areas of Glass/Epoxy Structures under Low Velocity Impact [Volume 1, Issue 2, 2014, Pages 81-85]
  • Glass/epoxy composites Environmental Effects on Mechanical Properties of Glass/Epoxy and Fiber Metal Laminates, Part I: Hygrothermal Aging [Volume 4, Issue 3, 2017, Pages 187-196]
  • Glass/epoxy composites Environmental effects on mechanical properties of glass/epoxy and fiber metal laminates, Part II: Isothermal aging [Volume 4, Issue 3, 2017, Pages 197-205]
  • Glass fiber Experimental investigation of the strength of glass fiber-reinforced concrete exposed to high temperature [Volume 5, Issue 2, 2018, Pages 103-113]
  • Graded layered foam Numerical Crashworthiness Analysis of Graded Layered Foam- Filled Tubes Under Axial Loading [Volume 6, Issue 1, 2019, Pages 57-64]
  • Graphene Cured Poly(ethylene-g-maleic anhydride)/Graphene Nanocomposite: Properties and Characterization [Volume 5, Issue 1, 2018, Pages 1-12]
  • Graphene Vibration Analysis of Circular Single-Layer Graphene Sheet Using Finite Element Method [Volume 6, Issue 2, 2019, Pages 131-138]
  • Graphene nano-platelets Mechanical Properties of Graphene/Epoxy Nanocomposites under Static and Flexural Fatigue Loadings [Volume 1, Issue 1, 2014, Pages 1-7]
  • Gravity Transverse Vibration for Non-uniform Timoshenko Nano-beams [Volume 2, Issue 1, 2015, Pages 1-16]
  • GRE composite pipe Damage Energy Evaluation in [55/-55]9 Composite Pipes using Acoustic Emission Method [Volume 2, Issue 2, 2015, Pages 127-134]
  • Green-Lindsay model Elasto-Thermodiffusive Response in a Two-Dimensional Transversely Isotropic Medium [Volume 6, Issue 2, 2019, Pages 95-104]
  • Groundwater recharge Improving the Performance of Porous Concrete Composites Using Zeolite as a Coarse Grain [Volume 5, Issue 2, 2018, Pages 157-163]

H

  • HAM An Analytical Study on Effects of adding Nanoparticles to Water and Enhancement in Thermal Properties Based on Falkner-Skan Model [Volume 1, Issue 1, 2014, Pages 27-35]
  • Hardness Investigation of Hardness, Morphology and Structural Analysis of NiCrBSi Composite Coating on Plain Carbon Steel [Volume 6, Issue 2, 2019, Pages 75-80]
  • Hardness A Comparative Study on the Microstructure and Mechanical Prop-erties of Al-Si-Cu/1wt %NCP composites after T6 Heat Treatment [(Articles in Press)]
  • Health monitoring Health Monitoring for Composite under Low-Cycle Cyclic Loading, Considering Effects of Acoustic Emission Sensor Type [Volume 6, Issue 1, 2019, Pages 19-26]
  • Heat treatment A Comparative Study on the Microstructure and Mechanical Prop-erties of Al-Si-Cu/1wt %NCP composites after T6 Heat Treatment [(Articles in Press)]
  • Heaviside function Thermal Buckling and Thermal Induced Free Vibration Analysis of Perforated Composite Plates: A Mathematical Model [(Articles in Press)]
  • High-cycle fatigue Study of High-cycle Fatigue Properties in Tibia Bovine Bones based on Reliability and Scatter-band Predictions [(Articles in Press)]
  • Higher Order Hamiltonian Sensitivity Analysis of Fiber-Reinforced Lamina Micro-Electro-Mechanical Switches with Nonlinear Vibration Using a Higher Order Hamiltonian Approach [Volume 5, Issue 1, 2018, Pages 25-39]
  • Higher-order plate theory On the Buckling the Behavior of a Multiphase Smart Plate based on a Higher-order Theory [Volume 4, Issue 1, 2017, Pages 47-58]
  • Higher-order shear deformation theory A New Three-Dimensional Refined Higher-Order Theory for Free Vibration Analysis of Composite Circular Cylindrical Shells [Volume 6, Issue 2, 2019, Pages 201-223]
  • High temperature Experimental investigation of the strength of glass fiber-reinforced concrete exposed to high temperature [Volume 5, Issue 2, 2018, Pages 103-113]
  • Hollow cylinder Transient Thermal Stresses Analysis in a FPGM Cylinder [Volume 6, Issue 2, 2019, Pages 81-94]
  • Hoop strength Damage Energy Evaluation in [55/-55]9 Composite Pipes using Acoustic Emission Method [Volume 2, Issue 2, 2015, Pages 127-134]
  • Hot extrusion A Case Study for Fabrication of MWCNT-TiO2 Hybrid Reinforced Aluminium Matrix Nanocomposites [Volume 1, Issue 2, 2014, Pages 107-111]
  • Hybrid Investigation of Buckling Analysis of Epoxy/ Nanoclay/ Carbon Fiber Hybrid Laminated Nanocomposite: Using VARTM Technique for Preparation [Volume 3, Issue 1, 2016, Pages 63-71]
  • Hybrid Improving Mechanical Properties of Nanocomposite-based Epoxy by High-impact Polystyrene and Multiwalled Carbon Nanotubes: Optimizing by a Mixture Design Approach [Volume 4, Issue 1, 2017, Pages 33-45]
  • Hybrid composites Compression Analysis of Hollow Cylinder Basalt Continuous Filament Epoxy Composite Filled with Shape Memory Wire [Volume 4, Issue 3, 2017, Pages 225-232]
  • Hybridization Optimization of Hybrid Composite Laminate Based on the Frequency using Imperialist Competitive Algorithm [Volume 1, Issue 1, 2014, Pages 37-48]
  • Hybrid thermoplastic nanocomposites Numerical Simulation of a Hybrid Nanocomposite Containing Ca-CO3 and Short Glass Fibers Subjected to Tensile Loading [Volume 4, Issue 2, 2017, Pages 117-125]
  • Hydroxyapatite The Effect of Processing Conditions on the Mechanical Properties of Polypropylene/Mesoporous Silica-Hydroxyapatite Hybrid Nanocomposites [Volume 3, Issue 2, 2016, Pages 73-82]
  • Hygrothermal aging Environmental Effects on Mechanical Properties of Glass/Epoxy and Fiber Metal Laminates, Part I: Hygrothermal Aging [Volume 4, Issue 3, 2017, Pages 187-196]
  • Hygrothermal stress Modeling of Hygrothermal Damage of Composite Materials [Volume 3, Issue 2, 2016, Pages 137-144]
  • Hyperbolic heat conduction Thermoelastic Interaction in a Three-Dimensional Layered Sandwich Structure [Volume 5, Issue 2, 2018, Pages 187-198]
  • Hyperbolic shear deformation theory Bending, buckling and free vibration responses of hyperbolic shear deformable FGM beams [Volume 5, Issue 1, 2018, Pages 13-24]

I

  • Impact properties Environmental Effects on Mechanical Properties of Glass/Epoxy and Fiber Metal Laminates, Part I: Hygrothermal Aging [Volume 4, Issue 3, 2017, Pages 187-196]
  • Impact properties Environmental effects on mechanical properties of glass/epoxy and fiber metal laminates, Part II: Isothermal aging [Volume 4, Issue 3, 2017, Pages 197-205]
  • Impact-withstanding Efficiency Geometric Effects on Nanopore Creation in Graphene and on the Impact-withstanding Efficiency of Graphene Nanosheets [Volume 5, Issue 1, 2018, Pages 91-102]
  • Imperialist competitive algorithm Optimization of Hybrid Composite Laminate Based on the Frequency using Imperialist Competitive Algorithm [Volume 1, Issue 1, 2014, Pages 37-48]
  • Infinite orthotropic plate Optimization of infinite composite plates with quasi-triangular holes under in-plane loading [Volume 5, Issue 2, 2018, Pages 115-130]
  • In situ formation In Situ Formation of SiC/CNT Ceramic Nanocomposite by Phenolic Pyrolysis [Volume 1, Issue 2, 2014, Pages 87-96]
  • Intraocular lenses Synthesis and Characterization of Polymer/Nanosilicagel Nano-composites [Volume 4, Issue 1, 2017, Pages 1-8]
  • Irregular tessellation Predicting Young’s Modulus of Aggregated Carbon Nanotube Reinforced Polymer [Volume 1, Issue 1, 2014, Pages 9-16]
  • Iso-thermal aging Environmental effects on mechanical properties of glass/epoxy and fiber metal laminates, Part II: Isothermal aging [Volume 4, Issue 3, 2017, Pages 197-205]

L

  • Laminate A Quasi-3D Polynomial Shear and Normal Deformation Theory for Laminated Composite, Sandwich, and Functionally Graded Beams [Volume 4, Issue 2, 2017, Pages 139-152]
  • Laminated beam Static Flexure of Soft Core Sandwich Beams using Trigonometric Shear Deformation Theory [Volume 2, Issue 1, 2015, Pages 45-53]
  • Laminated com-posite Semi Analytical Transient Dynamic Analysis of Composite Adhesive Single-lap Joints [(Articles in Press)]
  • Laminated Composite Size-dependent Bending of Geometrically Nonlinear of Micro-Laminated Composite Beam based on Modified Couple Stress Theory [Volume 3, Issue 1, 2016, Pages 53-62]
  • Laminated Composite Study of Laminated Composite MEMS and NEMS Performance in Nano Metric Operations [Volume 4, Issue 1, 2017, Pages 19-31]
  • Laminated composites A Numerical and Analytical Solution for the Free Vibration of Laminated Composites Using Different Plate Theories [Volume 4, Issue 1, 2017, Pages 75-87]
  • Laminated composites Delamination Analysis in Composite Root of a Carbon-Layer Reinforced Wind Turbine Blade [Volume 6, Issue 1, 2019, Pages 9-18]
  • Laminated sheet Using the Taguchi Method for Experimental and Numerical Investigations on the Square-Cup Deep-Drawing Process for Aluminum/Steel Laminated Sheets [Volume 4, Issue 2, 2017, Pages 169-177]
  • Laminates Investigation of Buckling Analysis of Epoxy/ Nanoclay/ Carbon Fiber Hybrid Laminated Nanocomposite: Using VARTM Technique for Preparation [Volume 3, Issue 1, 2016, Pages 63-71]
  • Laminates Improving Mechanical Properties of Nanocomposite-based Epoxy by High-impact Polystyrene and Multiwalled Carbon Nanotubes: Optimizing by a Mixture Design Approach [Volume 4, Issue 1, 2017, Pages 33-45]
  • Laplace transform The Effects of the Moving Load and the Attached Mass-Spring-Damper System Interactions on the Dynamic Responses of the Composite Plates: An Analytical Approach [Volume 2, Issue 1, 2015, Pages 17-30]
  • Laplace transform An Analytical Approach to Thermoelastic Bending of Simply Supported Advanced Ribbed Composite Plates [Volume 5, Issue 2, 2018, Pages 173-185]
  • Lattice structures Free Vibration of Lattice Cylindrical Composite Shell Reinforced with Carbon Nano-tubes [Volume 2, Issue 1, 2015, Pages 61-72]
  • Lattice structures The Effect of External Skin on Buckling Strength of Composite Lattice Cylinders Based on Numerical and Experimental Analysis [Volume 3, Issue 2, 2016, Pages 83-87]
  • Loading frequency Study of High-cycle Fatigue Properties in Tibia Bovine Bones based on Reliability and Scatter-band Predictions [(Articles in Press)]
  • Longitudinal dynamic behavior Nonlocal Analysis of Longitudinal Dynamic Behavior of Nanobars with Surface Energy Effect [Volume 6, Issue 2, 2019, Pages 147-158]
  • Longitudinal strength Damage Energy Evaluation in [55/-55]9 Composite Pipes using Acoustic Emission Method [Volume 2, Issue 2, 2015, Pages 127-134]
  • Long-term creep strain Creep Strain and Stress Analysis in Laminated Composite Pres-sure Vessels [Volume 5, Issue 2, 2018, Pages 141-147]
  • Low-cycle cyclic loading Health Monitoring for Composite under Low-Cycle Cyclic Loading, Considering Effects of Acoustic Emission Sensor Type [Volume 6, Issue 1, 2019, Pages 19-26]
  • Low impact Size Effect on the Damaged Areas of Glass/Epoxy Structures under Low Velocity Impact [Volume 1, Issue 2, 2014, Pages 81-85]

M

  • Magnetic field Nonlinear Magneto-Nonlocal Vibration Analysis of Coupled Piezoelectric Micro-Plates Reinforced with Agglomerated CNTs [(Articles in Press)]
  • Magneto-electro-elastic coupling On the Buckling the Behavior of a Multiphase Smart Plate based on a Higher-order Theory [Volume 4, Issue 1, 2017, Pages 47-58]
  • Magneto-electro-thermo-mechanical loadings Nonlocal Buckling and Vibration Analysis of Triple-Walled ZnO Piezoelectric Timoshenko Nano-beam Subjected to Magneto-Electro-Thermo-Mechanical Loadings [Volume 2, Issue 2, 2015, Pages 113-126]
  • Mass Loss Open-Hole Size and Thermal Cycling Effects on Mass Loss and Surface Degradation of Polymer Matrix Composites [Volume 4, Issue 2, 2017, Pages 111-116]
  • Mathematical model Improving the Performance of the Sandwich Panel with the Corrugated Core Filled with Metal Foam: Mathematical and Numerical Methods [Volume 6, Issue 2, 2019, Pages 249-261]
  • Mathematical modeling Thermal Buckling and Thermal Induced Free Vibration Analysis of Perforated Composite Plates: A Mathematical Model [(Articles in Press)]
  • Matrix cracking Propagation of Matrix Cracking and Induced Delaminatin in Cross-Ply Composite Beams Subjected to Bending Loads [Volume 6, Issue 1, 2019, Pages 45-50]
  • Maxwell equation The Effect of Temperature Dependency on the Thermo-Electro-Elastic Analysis of Functionally Graded Piezoelectric Spherical Shell [Volume 6, Issue 1, 2019, Pages 1-8]
  • Mechanical alloying The Structural and Mechanical Properties of Al-2.5%wt. B4C Met-al Matrix Nano-composite Fabricated by the Mechanical Alloying [Volume 2, Issue 1, 2015, Pages 39-44]
  • Mechanical alloying Effect of Particle Size on the Structural and Mechanical Properties of Al–AlN Nanocomposites Fabricated by Mechanical Alloying [Volume 2, Issue 2, 2015, Pages 73-78]
  • Mechanical and thermal loading Stress Analysis of FGM Rotating Disk Subjected to Mechanical and Thermal Loads in Aircraft Gas Turbine Engine [(Articles in Press)]
  • Mechanical Behavior Mechanical Characterization and Wear Behavior of Nano TiO2 Particulates Reinforced Al7075 Alloy Composites [(Articles in Press)]
  • Mechanical properties Mechanical Properties of Graphene/Epoxy Nanocomposites under Static and Flexural Fatigue Loadings [Volume 1, Issue 1, 2014, Pages 1-7]
  • Mechanical properties Atomic Simulation of Temperature Effect on the Mechanical Properties of Thin Films [Volume 2, Issue 1, 2015, Pages 31-38]
  • Mechanical properties The Structural and Mechanical Properties of Al-2.5%wt. B4C Met-al Matrix Nano-composite Fabricated by the Mechanical Alloying [Volume 2, Issue 1, 2015, Pages 39-44]
  • Mechanical properties Effect of Particle Size on the Structural and Mechanical Properties of Al–AlN Nanocomposites Fabricated by Mechanical Alloying [Volume 2, Issue 2, 2015, Pages 73-78]
  • Mechanical properties On the Study of Mechanical Properties of Aluminum/Nano-Alumina Composites Produced via Powder Injection Molding [Volume 3, Issue 1, 2016, Pages 45-51]
  • Mechanical properties Investigation of Buckling Analysis of Epoxy/ Nanoclay/ Carbon Fiber Hybrid Laminated Nanocomposite: Using VARTM Technique for Preparation [Volume 3, Issue 1, 2016, Pages 63-71]
  • Mechanical properties The Effect of Processing Conditions on the Mechanical Properties of Polypropylene/Mesoporous Silica-Hydroxyapatite Hybrid Nanocomposites [Volume 3, Issue 2, 2016, Pages 73-82]
  • Mechanical properties Mechanical Properties of CNT-Reinforced Polymer Nano-composites: A Molecular Dynamics Study [Volume 3, Issue 2, 2016, Pages 113-121]
  • Mechanical properties Improving Mechanical Properties of Nanocomposite-based Epoxy by High-impact Polystyrene and Multiwalled Carbon Nanotubes: Optimizing by a Mixture Design Approach [Volume 4, Issue 1, 2017, Pages 33-45]
  • Mechanical properties Effects of reinforcement distribution on the mechanical properties of Al–Fe3O4 nanocomposites fabricated via accumulative roll bonding [Volume 5, Issue 2, 2018, Pages 131-139]
  • Mechanical properties Influence of Different Foaming Conditions on the Mechanical, Physical, and Structural Properties of Polypropylene Foam [Volume 6, Issue 2, 2019, Pages 225-237]
  • Mechanical testing Evaluation of hardness and wear resistance of nano-sized titanium-carbide-reinforced commercially cast aluminum alloy matrices [Volume 5, Issue 1, 2018, Pages 75-81]
  • Mechanical testing Investigation of Tensile Characteristics of an Epoxy Matrix Com-posite with Uni-Directional and Hybrid Tissue Natural Hemp Fibers [Volume 6, Issue 2, 2019, Pages 181-190]
  • MEMS and NEMS Study of Laminated Composite MEMS and NEMS Performance in Nano Metric Operations [Volume 4, Issue 1, 2017, Pages 19-31]
  • MEMS Switches Sensitivity Analysis of Fiber-Reinforced Lamina Micro-Electro-Mechanical Switches with Nonlinear Vibration Using a Higher Order Hamiltonian Approach [Volume 5, Issue 1, 2018, Pages 25-39]
  • Mesh-free Static and Free Vibration Analyses of Functionally Graded Nano-composite Plates Reinforced by Wavy Carbon Nanotubes Resting on a Pasternak Elastic Foundation [Volume 3, Issue 2, 2016, Pages 123-135]
  • Mesh-free Mesh-free Dynamic Analyses of FGM Sandwich Plates Resting on A Pasternak Elastic Foundation [Volume 4, Issue 2, 2017, Pages 153-168]
  • Mesoporous silica The Effect of Processing Conditions on the Mechanical Properties of Polypropylene/Mesoporous Silica-Hydroxyapatite Hybrid Nanocomposites [Volume 3, Issue 2, 2016, Pages 73-82]
  • Metal Foam Improving the Performance of the Sandwich Panel with the Corrugated Core Filled with Metal Foam: Mathematical and Numerical Methods [Volume 6, Issue 2, 2019, Pages 249-261]
  • Metal matrix composite Effects of reinforcement distribution on the mechanical properties of Al–Fe3O4 nanocomposites fabricated via accumulative roll bonding [Volume 5, Issue 2, 2018, Pages 131-139]
  • Metal–matrix Composites Evaluation of hardness and wear resistance of nano-sized titanium-carbide-reinforced commercially cast aluminum alloy matrices [Volume 5, Issue 1, 2018, Pages 75-81]
  • Microcellular foam Influence of Different Foaming Conditions on the Mechanical, Physical, and Structural Properties of Polypropylene Foam [Volume 6, Issue 2, 2019, Pages 225-237]
  • Micromechanical model Effects of Magnetic Field in Creep Behavior of Three-Phase Laminated Composite Cylindrical Shells [Volume 6, Issue 1, 2019, Pages 51-56]
  • Micromechanics Propagation of Matrix Cracking and Induced Delaminatin in Cross-Ply Composite Beams Subjected to Bending Loads [Volume 6, Issue 1, 2019, Pages 45-50]
  • Microstructure Effects of reinforcement distribution on the mechanical properties of Al–Fe3O4 nanocomposites fabricated via accumulative roll bonding [Volume 5, Issue 2, 2018, Pages 131-139]
  • Mixture Design Improving Mechanical Properties of Nanocomposite-based Epoxy by High-impact Polystyrene and Multiwalled Carbon Nanotubes: Optimizing by a Mixture Design Approach [Volume 4, Issue 1, 2017, Pages 33-45]
  • Mode of failure Size Effect on the Damaged Areas of Glass/Epoxy Structures under Low Velocity Impact [Volume 1, Issue 2, 2014, Pages 81-85]
  • Mode shape Dynamic Characteristics of Joined Steel and Carbon Fiber-Reinforced Plastic Tubes: Experimental and Numerical Investigation [Volume 4, Issue 2, 2017, Pages 88-97]
  • Modifided couple stress theory Size-dependent Bending of Geometrically Nonlinear of Micro-Laminated Composite Beam based on Modified Couple Stress Theory [Volume 3, Issue 1, 2016, Pages 53-62]
  • Modified Halpin-Tsai equations Free Vibration of Lattice Cylindrical Composite Shell Reinforced with Carbon Nano-tubes [Volume 2, Issue 1, 2015, Pages 61-72]
  • Moisture Influence of Hygrothermal environment and FG material on natural frequency and parametric instability of Plates [(Articles in Press)]
  • Molecular Dynamics Mechanical Properties of CNT-Reinforced Polymer Nano-composites: A Molecular Dynamics Study [Volume 3, Issue 2, 2016, Pages 113-121]
  • Molecular Dynamics Geometric Effects on Nanopore Creation in Graphene and on the Impact-withstanding Efficiency of Graphene Nanosheets [Volume 5, Issue 1, 2018, Pages 91-102]
  • Molecular dynamic simulation Atomic Simulation of Temperature Effect on the Mechanical Properties of Thin Films [Volume 2, Issue 1, 2015, Pages 31-38]
  • Mori-Tanaka approach Three-dimensional elasticity solution for vibrational analysis of thick continuously graded sandwich plates with different boundary conditions using a two-parameter micromechanical model for agglomeration [Volume 5, Issue 1, 2018, Pages 49-66]
  • Mori–Tanaka approach Free Vibration and Buckling Analyses of Functionally Graded Nanocomposite Plates Reinforced by Carbon Nanotube [Volume 4, Issue 1, 2017, Pages 59-73]
  • Morphology Investigation of Hardness, Morphology and Structural Analysis of NiCrBSi Composite Coating on Plain Carbon Steel [Volume 6, Issue 2, 2019, Pages 75-80]
  • Multi-scale modeling Predicting Young’s Modulus of Aggregated Carbon Nanotube Reinforced Polymer [Volume 1, Issue 1, 2014, Pages 9-16]
  • Multi-Walled Carbon Nanotube Effects of Nanotube/Matrix Interface on Multi-Walled Carbon Nanotube Reinforced Polymer Mechanical Properties [Volume 4, Issue 3, 2017, Pages 211-223]

N

  • Nanobar Nonlocal Analysis of Longitudinal Dynamic Behavior of Nanobars with Surface Energy Effect [Volume 6, Issue 2, 2019, Pages 147-158]
  • Nanoclay Flexural Behavior of Fiber–Metal Laminates Reinforced with Surface-Functionalized Nanoclay [Volume 5, Issue 2, 2018, Pages 149-156]
  • Nanocomposite In Situ Formation of SiC/CNT Ceramic Nanocomposite by Phenolic Pyrolysis [Volume 1, Issue 2, 2014, Pages 87-96]
  • Nanocomposite Buckling Analysis of Spherical Composite Panels Reinforced by Carbon Nanotube [Volume 2, Issue 2, 2015, Pages 135-144]
  • Nanocomposite The Effect of Processing Conditions on the Mechanical Properties of Polypropylene/Mesoporous Silica-Hydroxyapatite Hybrid Nanocomposites [Volume 3, Issue 2, 2016, Pages 73-82]
  • Nanocomposite Distribution of Residual Stresses in Polymer Reinforced Carbon Nanotubes and Laminated Carbon Fibers [Volume 4, Issue 1, 2017, Pages 9-18]
  • Nanocomposite Synthesis and Characterization of Polymer/Nanosilicagel Nano-composites [Volume 4, Issue 1, 2017, Pages 1-8]
  • Nanocomposite Investigation into The Behavior of Nano-composite Tubes at Ballistic Impact [Volume 4, Issue 3, 2017, Pages 207-210]
  • Nanocomposite Effects of Nanotube/Matrix Interface on Multi-Walled Carbon Nanotube Reinforced Polymer Mechanical Properties [Volume 4, Issue 3, 2017, Pages 211-223]
  • Nanocomposite Sintered Steel Composites Reinforced with Ceramic Nanoparticles: Fabrication, Characteristics and Wear Behavior [Volume 6, Issue 2, 2019, Pages 191-200]
  • Nanocomposite A Comparative Study on the Microstructure and Mechanical Prop-erties of Al-Si-Cu/1wt %NCP composites after T6 Heat Treatment [(Articles in Press)]
  • Nanocomposite plates Static and Free Vibration Analyses of Functionally Graded Nano-composite Plates Reinforced by Wavy Carbon Nanotubes Resting on a Pasternak Elastic Foundation [Volume 3, Issue 2, 2016, Pages 123-135]
  • Nanocomposites Mechanical Properties of Graphene/Epoxy Nanocomposites under Static and Flexural Fatigue Loadings [Volume 1, Issue 1, 2014, Pages 1-7]
  • Nanocomposites Experimental Study on Amine-Functionalized Carbon Nanotubes’ Effect on the Thermomechanical Properties of CNT/Epoxy Nano-composites [Volume 5, Issue 1, 2018, Pages 41-48]
  • Nanocomposites Cured Poly(ethylene-g-maleic anhydride)/Graphene Nanocomposite: Properties and Characterization [Volume 5, Issue 1, 2018, Pages 1-12]
  • Nanofluids An Analytical Study on Effects of adding Nanoparticles to Water and Enhancement in Thermal Properties Based on Falkner-Skan Model [Volume 1, Issue 1, 2014, Pages 27-35]
  • Nano-indentation test Atomic Simulation of Temperature Effect on the Mechanical Properties of Thin Films [Volume 2, Issue 1, 2015, Pages 31-38]
  • Nano-manipulation Study of Laminated Composite MEMS and NEMS Performance in Nano Metric Operations [Volume 4, Issue 1, 2017, Pages 19-31]
  • Nanopore Geometric Effects on Nanopore Creation in Graphene and on the Impact-withstanding Efficiency of Graphene Nanosheets [Volume 5, Issue 1, 2018, Pages 91-102]
  • Nano-reinforcement On the Study of Mechanical Properties of Aluminum/Nano-Alumina Composites Produced via Powder Injection Molding [Volume 3, Issue 1, 2016, Pages 45-51]
  • Nano-reinforcement Sintered Steel Composites Reinforced with Ceramic Nanoparticles: Fabrication, Characteristics and Wear Behavior [Volume 6, Issue 2, 2019, Pages 191-200]
  • Nano-silica Study on Compression and Flexural Behavior of ABS-SiO2 Poly-mer Matrix Composite Fabricated by Hot Extrusion [Volume 6, Issue 2, 2019, Pages 239-247]
  • Nano TiO2 Mechanical Characterization and Wear Behavior of Nano TiO2 Particulates Reinforced Al7075 Alloy Composites [(Articles in Press)]
  • Natural hemp fibers Investigation of Tensile Characteristics of an Epoxy Matrix Com-posite with Uni-Directional and Hybrid Tissue Natural Hemp Fibers [Volume 6, Issue 2, 2019, Pages 181-190]
  • NiCrBSi coating Investigation of Hardness, Morphology and Structural Analysis of NiCrBSi Composite Coating on Plain Carbon Steel [Volume 6, Issue 2, 2019, Pages 75-80]
  • Nonlinear dynamic Adaptive Tunable Vibration Absorber using Shape Memory Alloy [Volume 2, Issue 1, 2015, Pages 55-60]
  • Nonlinear strain Nonlinear Vibration Analysis of the Composite Cable using Perturbation Method and the Green-Lagrangian Nonlinear Strain [Volume 6, Issue 1, 2019, Pages 27-34]
  • Nonlinear vibration Sensitivity Analysis of Fiber-Reinforced Lamina Micro-Electro-Mechanical Switches with Nonlinear Vibration Using a Higher Order Hamiltonian Approach [Volume 5, Issue 1, 2018, Pages 25-39]
  • Nonlinear vibration Nonlinear Vibration Analysis of the Composite Cable using Perturbation Method and the Green-Lagrangian Nonlinear Strain [Volume 6, Issue 1, 2019, Pages 27-34]
  • Nonlinear viscoelastic Creep Strain and Stress Analysis in Laminated Composite Pres-sure Vessels [Volume 5, Issue 2, 2018, Pages 141-147]
  • Non-local buckling and vibration analysis Nonlocal Buckling and Vibration Analysis of Triple-Walled ZnO Piezoelectric Timoshenko Nano-beam Subjected to Magneto-Electro-Thermo-Mechanical Loadings [Volume 2, Issue 2, 2015, Pages 113-126]
  • Nonlocal elasticity Transverse Vibration for Non-uniform Timoshenko Nano-beams [Volume 2, Issue 1, 2015, Pages 1-16]
  • Nonlocal elasticity Free Vibrations Analysis of Functionally Graded Rectangular Nano-plates based on Nonlocal Exponential Shear Deformation Theory [Volume 2, Issue 2, 2015, Pages 79-93]
  • Nonlocal elasticity theory Nonlocal Analysis of Longitudinal Dynamic Behavior of Nanobars with Surface Energy Effect [Volume 6, Issue 2, 2019, Pages 147-158]
  • Nonlocal theory Analytical Approach for Thermo-electro-mechanical Vibration of Piezoelectric Nanoplates Resting on Elastic Foundations based on Nonlocal Theory [Volume 6, Issue 2, 2019, Pages 117-129]
  • Non-uniform nano-beam Transverse Vibration for Non-uniform Timoshenko Nano-beams [Volume 2, Issue 1, 2015, Pages 1-16]
  • Normal mode analysis Elasto-Thermodiffusive Response in a Two-Dimensional Transversely Isotropic Medium [Volume 6, Issue 2, 2019, Pages 95-104]
  • Normal mode analysis Thermoelastic Interaction in a Three-Dimensional Layered Sandwich Structure [Volume 5, Issue 2, 2018, Pages 187-198]
  • Numerical Method A Numerical and Analytical Solution for the Free Vibration of Laminated Composites Using Different Plate Theories [Volume 4, Issue 1, 2017, Pages 75-87]

O

  • Open-Hole Specimens Open-Hole Size and Thermal Cycling Effects on Mass Loss and Surface Degradation of Polymer Matrix Composites [Volume 4, Issue 2, 2017, Pages 111-116]
  • Optimization Vibration Optimization of Fiber-Metal Laminated Composite Shallow Shell Panels Using an Adaptive PSO Algorithm [Volume 4, Issue 2, 2017, Pages 99-110]
  • Optimization method Improving the Performance of the Sandwich Panel with the Corrugated Core Filled with Metal Foam: Mathematical and Numerical Methods [Volume 6, Issue 2, 2019, Pages 249-261]

P

  • Parametric instability Dynamic Stability of Moderately Thick Composite Laminated Skew Plates using Finite Strip Method [Volume 2, Issue 2, 2015, Pages 145-150]
  • Particle swarm optimization Optimization of infinite composite plates with quasi-triangular holes under in-plane loading [Volume 5, Issue 2, 2018, Pages 115-130]
  • Peel and shear stresses Semi Analytical Transient Dynamic Analysis of Composite Adhesive Single-lap Joints [(Articles in Press)]
  • Perforated plate Thermal Buckling and Thermal Induced Free Vibration Analysis of Perforated Composite Plates: A Mathematical Model [(Articles in Press)]
  • Perturbation technique Non-Linear Analysis of Functionally Graded Sector Plates with Simply Supported Radial Edges Under Transverse Loading [Volume 6, Issue 1, 2019, Pages 65-74]
  • Phase transformation Adaptive Tunable Vibration Absorber using Shape Memory Alloy [Volume 2, Issue 1, 2015, Pages 55-60]
  • Phenolic resin Accelerated Heat Aging Study of Phenolic/Basalt Fiber Reinforced Composites [Volume 3, Issue 1, 2016, Pages 1-7]
  • Physical foaming method Influence of Different Foaming Conditions on the Mechanical, Physical, and Structural Properties of Polypropylene Foam [Volume 6, Issue 2, 2019, Pages 225-237]
  • Physical properties Improving the Performance of Porous Concrete Composites Using Zeolite as a Coarse Grain [Volume 5, Issue 2, 2018, Pages 157-163]
  • Piezoelectric Nonlinear Magneto-Nonlocal Vibration Analysis of Coupled Piezoelectric Micro-Plates Reinforced with Agglomerated CNTs [(Articles in Press)]
  • Piezo-electric Transient Thermal Stresses Analysis in a FPGM Cylinder [Volume 6, Issue 2, 2019, Pages 81-94]
  • Piezoelectric layer Analytical Solution for Sound Radiation of Vibrating Circular Plates coupled with Piezo-electric Layers [Volume 3, Issue 2, 2016, Pages 89-98]
  • Piezoelectric nanoplates Analytical Approach for Thermo-electro-mechanical Vibration of Piezoelectric Nanoplates Resting on Elastic Foundations based on Nonlocal Theory [Volume 6, Issue 2, 2019, Pages 117-129]
  • Piezoelectric plates Fluid-Structure Interaction of Vibrating Composite Piezoelectric Plates using exponential shear deformation theory [(Articles in Press)]
  • Plane elasticity Elastic analysis of Shrink-fitted Thick FGM Cylinders Based on Linear Plane Elasticity Theory [(Articles in Press)]
  • Poly(ethylene-g-maleic anhydride) Cured Poly(ethylene-g-maleic anhydride)/Graphene Nanocomposite: Properties and Characterization [Volume 5, Issue 1, 2018, Pages 1-12]
  • Polymer matrix composites Creep Strain and Stress Analysis in Laminated Composite Pres-sure Vessels [Volume 5, Issue 2, 2018, Pages 141-147]
  • Polymer-matrix composites Accelerated Heat Aging Study of Phenolic/Basalt Fiber Reinforced Composites [Volume 3, Issue 1, 2016, Pages 1-7]
  • Polymer-matrix composites Investigation of Tensile Characteristics of an Epoxy Matrix Com-posite with Uni-Directional and Hybrid Tissue Natural Hemp Fibers [Volume 6, Issue 2, 2019, Pages 181-190]
  • Polymer Matrix Composites (PMCs) Open-Hole Size and Thermal Cycling Effects on Mass Loss and Surface Degradation of Polymer Matrix Composites [Volume 4, Issue 2, 2017, Pages 111-116]
  • Polymer nanocomposites Mechanical Properties of CNT-Reinforced Polymer Nano-composites: A Molecular Dynamics Study [Volume 3, Issue 2, 2016, Pages 113-121]
  • Polypropylene Influence of Different Foaming Conditions on the Mechanical, Physical, and Structural Properties of Polypropylene Foam [Volume 6, Issue 2, 2019, Pages 225-237]
  • Polyurthane Numerical Crashworthiness Analysis of Graded Layered Foam- Filled Tubes Under Axial Loading [Volume 6, Issue 1, 2019, Pages 57-64]
  • Porous concrete Improving the Performance of Porous Concrete Composites Using Zeolite as a Coarse Grain [Volume 5, Issue 2, 2018, Pages 157-163]
  • Powder characteristics Effect of Particle Size on the Structural and Mechanical Properties of Al–AlN Nanocomposites Fabricated by Mechanical Alloying [Volume 2, Issue 2, 2015, Pages 73-78]
  • Powder injection molding On the Study of Mechanical Properties of Aluminum/Nano-Alumina Composites Produced via Powder Injection Molding [Volume 3, Issue 1, 2016, Pages 45-51]
  • Powder metallurgy Experimental Investigation of FGM Dental Implant Properties Made from Ti/HA Composite [Volume 4, Issue 3, 2017, Pages 233-237]
  • Power law index An Investigation of Stress and Deformation Behavior of Functionally Graded Timoshenko Beams subjected to Thermo-Mechanical Load [(Articles in Press)]
  • Precision closed-form solution Precision Closed-form Solution for Out-of-plane Vibration of Rectangular Plates via Trigonometric Shear Deformation Theory [Volume 3, Issue 1, 2016, Pages 31-43]
  • Pressure Vessel Failure Pressure Prediction of Semi Spherical GFRP Shells in Thermal Environment [(Articles in Press)]
  • Pre-stress loading Size-dependent Effects on the Vibration Behavior of a Ti-moshenko Microbeam subjected to Pre-stress Loading based on DQM [Volume 3, Issue 2, 2016, Pages 99-112]
  • Pyrolysis In Situ Formation of SiC/CNT Ceramic Nanocomposite by Phenolic Pyrolysis [Volume 1, Issue 2, 2014, Pages 87-96]

Q

  • Quasi-triangular hole Optimization of infinite composite plates with quasi-triangular holes under in-plane loading [Volume 5, Issue 2, 2018, Pages 115-130]

R

  • Rayleigh-Ritz Free Vibration Analysis of Size-Dependent, Functionally Graded, Rectangular Nano/Micro-plates based on Modified Nonlinear Couple Stress Shear Deformation Plate Theories [Volume 4, Issue 2, 2017, Pages 127-137]
  • Rectangular plates Free Natural Frequency Analysis of an FG Composite Rectangular Plate Coupled with Fluid using Rayleigh–Ritz Method [Volume 1, Issue 2, 2014, Pages 131-143]
  • Refined plate theory Free Vibration and Buckling Analyses of Functionally Graded Nanocomposite Plates Reinforced by Carbon Nanotube [Volume 4, Issue 1, 2017, Pages 59-73]
  • Reliability Study of High-cycle Fatigue Properties in Tibia Bovine Bones based on Reliability and Scatter-band Predictions [(Articles in Press)]
  • Residual stresses Distribution of Residual Stresses in Polymer Reinforced Carbon Nanotubes and Laminated Carbon Fibers [Volume 4, Issue 1, 2017, Pages 9-18]
  • Rheology Synthesis and Characterization of Polymer/Nanosilicagel Nano-composites [Volume 4, Issue 1, 2017, Pages 1-8]
  • Ribbed composite plate An Analytical Approach to Thermoelastic Bending of Simply Supported Advanced Ribbed Composite Plates [Volume 5, Issue 2, 2018, Pages 173-185]
  • Rotating FGM disk Stress Analysis of FGM Rotating Disk Subjected to Mechanical and Thermal Loads in Aircraft Gas Turbine Engine [(Articles in Press)]

S

  • Sandwich A Quasi-3D Polynomial Shear and Normal Deformation Theory for Laminated Composite, Sandwich, and Functionally Graded Beams [Volume 4, Issue 2, 2017, Pages 139-152]
  • Sandwich beam Static Flexure of Soft Core Sandwich Beams using Trigonometric Shear Deformation Theory [Volume 2, Issue 1, 2015, Pages 45-53]
  • Sandwich plate Mesh-free Dynamic Analyses of FGM Sandwich Plates Resting on A Pasternak Elastic Foundation [Volume 4, Issue 2, 2017, Pages 153-168]
  • Sandwich structures Three-dimensional elasticity solution for vibrational analysis of thick continuously graded sandwich plates with different boundary conditions using a two-parameter micromechanical model for agglomeration [Volume 5, Issue 1, 2018, Pages 49-66]
  • Sandwich theory A novel method for considering interlayer effects between graphene nanoribbons and elastic medium in free vibration analysis [(Articles in Press)]
  • Scatter-band Study of High-cycle Fatigue Properties in Tibia Bovine Bones based on Reliability and Scatter-band Predictions [(Articles in Press)]
  • Schapery single integral Creep Strain and Stress Analysis in Laminated Composite Pres-sure Vessels [Volume 5, Issue 2, 2018, Pages 141-147]
  • Sectorial plate Non-Linear Analysis of Functionally Graded Sector Plates with Simply Supported Radial Edges Under Transverse Loading [Volume 6, Issue 1, 2019, Pages 65-74]
  • SEM Effect of Aging on Fracture Toughness of Al6061-Graphite Particulate Composites [Volume 6, Issue 2, 2019, Pages 139-146]
  • Sensitivity analysis Sensitivity Analysis of Fiber-Reinforced Lamina Micro-Electro-Mechanical Switches with Nonlinear Vibration Using a Higher Order Hamiltonian Approach [Volume 5, Issue 1, 2018, Pages 25-39]
  • Sensor type Health Monitoring for Composite under Low-Cycle Cyclic Loading, Considering Effects of Acoustic Emission Sensor Type [Volume 6, Issue 1, 2019, Pages 19-26]
  • Shallow Shell Vibration Optimization of Fiber-Metal Laminated Composite Shallow Shell Panels Using an Adaptive PSO Algorithm [Volume 4, Issue 2, 2017, Pages 99-110]
  • Shape memory alloy Adaptive Tunable Vibration Absorber using Shape Memory Alloy [Volume 2, Issue 1, 2015, Pages 55-60]
  • Shape memory alloy Compression Analysis of Hollow Cylinder Basalt Continuous Filament Epoxy Composite Filled with Shape Memory Wire [Volume 4, Issue 3, 2017, Pages 225-232]
  • Shear and normal deformation A Quasi-3D Polynomial Shear and Normal Deformation Theory for Laminated Composite, Sandwich, and Functionally Graded Beams [Volume 4, Issue 2, 2017, Pages 139-152]
  • Shear effects A novel method for considering interlayer effects between graphene nanoribbons and elastic medium in free vibration analysis [(Articles in Press)]
  • Shrink-fit Elastic analysis of Shrink-fitted Thick FGM Cylinders Based on Linear Plane Elasticity Theory [(Articles in Press)]
  • Silica Synthesis and Characterization of Polymer/Nanosilicagel Nano-composites [Volume 4, Issue 1, 2017, Pages 1-8]
  • Silicon particles In Situ Formation of SiC/CNT Ceramic Nanocomposite by Phenolic Pyrolysis [Volume 1, Issue 2, 2014, Pages 87-96]
  • Silicon sealant Experimental Study on Double-Walled Copper and Carbon/Epoxy Composite Tubes under the Axial Loading [Volume 1, Issue 2, 2014, Pages 71-79]
  • Simple blade Thermoelastic analysis of a functionally graded simple blade using first-order shear deformation theory [(Articles in Press)]
  • Simple theory Nonlocal Analysis of Longitudinal Dynamic Behavior of Nanobars with Surface Energy Effect [Volume 6, Issue 2, 2019, Pages 147-158]
  • Single-layer Graphene Sheets Geometric Effects on Nanopore Creation in Graphene and on the Impact-withstanding Efficiency of Graphene Nanosheets [Volume 5, Issue 1, 2018, Pages 91-102]
  • Sintered Steel Sintered Steel Composites Reinforced with Ceramic Nanoparticles: Fabrication, Characteristics and Wear Behavior [Volume 6, Issue 2, 2019, Pages 191-200]
  • Size-dependent Size-dependent Bending of Geometrically Nonlinear of Micro-Laminated Composite Beam based on Modified Couple Stress Theory [Volume 3, Issue 1, 2016, Pages 53-62]
  • Size dependent effect Size-dependent Effects on the Vibration Behavior of a Ti-moshenko Microbeam subjected to Pre-stress Loading based on DQM [Volume 3, Issue 2, 2016, Pages 99-112]
  • Skew plate Dynamic Stability of Moderately Thick Composite Laminated Skew Plates using Finite Strip Method [Volume 2, Issue 2, 2015, Pages 145-150]
  • Sloshing fluid Free Natural Frequency Analysis of an FG Composite Rectangular Plate Coupled with Fluid using Rayleigh–Ritz Method [Volume 1, Issue 2, 2014, Pages 131-143]
  • Smart nanocomposite plate Biaxial Buckling and Bending of Smart Nanocomposite Plate Reinforced by CNTs using Extended Mixture Rule Approach [Volume 1, Issue 1, 2014, Pages 17-26]
  • Smart plate On the Buckling the Behavior of a Multiphase Smart Plate based on a Higher-order Theory [Volume 4, Issue 1, 2017, Pages 47-58]
  • Soft core Static Flexure of Soft Core Sandwich Beams using Trigonometric Shear Deformation Theory [Volume 2, Issue 1, 2015, Pages 45-53]
  • Sol-gel Synthesis and Characterization of Polymer/Nanosilicagel Nano-composites [Volume 4, Issue 1, 2017, Pages 1-8]
  • Sound power Analytical Solution for Sound Radiation of Vibrating Circular Plates coupled with Piezo-electric Layers [Volume 3, Issue 2, 2016, Pages 89-98]
  • Spark plasma sintering (SPS) Experimental Investigation of FGM Dental Implant Properties Made from Ti/HA Composite [Volume 4, Issue 3, 2017, Pages 233-237]
  • Spherical panel Buckling Analysis of Spherical Composite Panels Reinforced by Carbon Nanotube [Volume 2, Issue 2, 2015, Pages 135-144]
  • Square Using the Taguchi Method for Experimental and Numerical Investigations on the Square-Cup Deep-Drawing Process for Aluminum/Steel Laminated Sheets [Volume 4, Issue 2, 2017, Pages 169-177]
  • Stacking sequence Optimization of Hybrid Composite Laminate Based on the Frequency using Imperialist Competitive Algorithm [Volume 1, Issue 1, 2014, Pages 37-48]
  • Static Elasticity Solution of Functionally Graded Carbon Nanotube Reinforced Composite Cylindrical Panel [Volume 1, Issue 1, 2014, Pages 49-60]
  • Static Static and Free Vibration Analyses of Functionally Graded Nano-composite Plates Reinforced by Wavy Carbon Nanotubes Resting on a Pasternak Elastic Foundation [Volume 3, Issue 2, 2016, Pages 123-135]
  • Steel beam Investigation of Nonlinear Behavior of Composite Bracing Structures with Concrete Columns and Steel Beams (RCS) Using Finite Element Method [(Articles in Press)]
  • Steel/composite joined tubes Dynamic Characteristics of Joined Steel and Carbon Fiber-Reinforced Plastic Tubes: Experimental and Numerical Investigation [Volume 4, Issue 2, 2017, Pages 88-97]
  • Stiffened composite cylindrically shell The Effect of External Skin on Buckling Strength of Composite Lattice Cylinders Based on Numerical and Experimental Analysis [Volume 3, Issue 2, 2016, Pages 83-87]
  • Stochastic modeling Predicting Young’s Modulus of Aggregated Carbon Nanotube Reinforced Polymer [Volume 1, Issue 1, 2014, Pages 9-16]
  • Strain energy release rate Propagation of Matrix Cracking and Induced Delaminatin in Cross-Ply Composite Beams Subjected to Bending Loads [Volume 6, Issue 1, 2019, Pages 45-50]
  • Strength Investigation of Tensile Characteristics of an Epoxy Matrix Com-posite with Uni-Directional and Hybrid Tissue Natural Hemp Fibers [Volume 6, Issue 2, 2019, Pages 181-190]
  • Stress analysis Stress Analysis of FGM Rotating Disk Subjected to Mechanical and Thermal Loads in Aircraft Gas Turbine Engine [(Articles in Press)]
  • Surface Degradation Open-Hole Size and Thermal Cycling Effects on Mass Loss and Surface Degradation of Polymer Matrix Composites [Volume 4, Issue 2, 2017, Pages 111-116]
  • Surface energy Nonlocal Analysis of Longitudinal Dynamic Behavior of Nanobars with Surface Energy Effect [Volume 6, Issue 2, 2019, Pages 147-158]
  • Surface functionalization Flexural Behavior of Fiber–Metal Laminates Reinforced with Surface-Functionalized Nanoclay [Volume 5, Issue 2, 2018, Pages 149-156]

T

  • Taguchi Using the Taguchi Method for Experimental and Numerical Investigations on the Square-Cup Deep-Drawing Process for Aluminum/Steel Laminated Sheets [Volume 4, Issue 2, 2017, Pages 169-177]
  • Temperature Influence of Hygrothermal environment and FG material on natural frequency and parametric instability of Plates [(Articles in Press)]
  • Temperature dependent materials The Effect of Temperature Dependency on the Thermo-Electro-Elastic Analysis of Functionally Graded Piezoelectric Spherical Shell [Volume 6, Issue 1, 2019, Pages 1-8]
  • Tensile-compressive effects A novel method for considering interlayer effects between graphene nanoribbons and elastic medium in free vibration analysis [(Articles in Press)]
  • Tensile properties Accelerated Heat Aging Study of Phenolic/Basalt Fiber Reinforced Composites [Volume 3, Issue 1, 2016, Pages 1-7]
  • Tensile properties A Study of the Effect of TPU and Clay Nanoparticles on the Mechanical Behavior of PBT-Based Nanocomposites [Volume 4, Issue 3, 2017, Pages 179-186]
  • Tensile properties Numerical Simulation of a Hybrid Nanocomposite Containing Ca-CO3 and Short Glass Fibers Subjected to Tensile Loading [Volume 4, Issue 2, 2017, Pages 117-125]
  • The extended mixture rule approach Biaxial Buckling and Bending of Smart Nanocomposite Plate Reinforced by CNTs using Extended Mixture Rule Approach [Volume 1, Issue 1, 2014, Pages 17-26]
  • Thermal buckling Thermal Buckling and Thermal Induced Free Vibration Analysis of Perforated Composite Plates: A Mathematical Model [(Articles in Press)]
  • Thermal conductivity The Effect of Temperature Dependency on the Thermo-Electro-Elastic Analysis of Functionally Graded Piezoelectric Spherical Shell [Volume 6, Issue 1, 2019, Pages 1-8]
  • Ther-malCycling Open-Hole Size and Thermal Cycling Effects on Mass Loss and Surface Degradation of Polymer Matrix Composites [Volume 4, Issue 2, 2017, Pages 111-116]
  • Thermal Stress Transient Thermal Stresses Analysis in a FPGM Cylinder [Volume 6, Issue 2, 2019, Pages 81-94]
  • Thermoelastic Analysis Thermoelastic Analysis of Compressor Spool in Turbojet Engine and Redesign it Using Functionally Graded Materials with Opti-mal Coefficients [Volume 6, Issue 2, 2019, Pages 167-179]
  • Thermoelastic Bending An Analytical Approach to Thermoelastic Bending of Simply Supported Advanced Ribbed Composite Plates [Volume 5, Issue 2, 2018, Pages 173-185]
  • Thermo-magneto-mechanical loading Effects of Magnetic Field in Creep Behavior of Three-Phase Laminated Composite Cylindrical Shells [Volume 6, Issue 1, 2019, Pages 51-56]
  • Thermo-mechanical load An Investigation of Stress and Deformation Behavior of Functionally Graded Timoshenko Beams subjected to Thermo-Mechanical Load [(Articles in Press)]
  • Thermomechanical Properties Experimental Study on Amine-Functionalized Carbon Nanotubes’ Effect on the Thermomechanical Properties of CNT/Epoxy Nano-composites [Volume 5, Issue 1, 2018, Pages 41-48]
  • Thick-walled cylinder Elastic analysis of Shrink-fitted Thick FGM Cylinders Based on Linear Plane Elasticity Theory [(Articles in Press)]
  • Thin film coatings Atomic Simulation of Temperature Effect on the Mechanical Properties of Thin Films [Volume 2, Issue 1, 2015, Pages 31-38]
  • Thin-walled tube Numerical Crashworthiness Analysis of Graded Layered Foam- Filled Tubes Under Axial Loading [Volume 6, Issue 1, 2019, Pages 57-64]
  • Third order shear deformation theory Dynamic Stability of Moderately Thick Composite Laminated Skew Plates using Finite Strip Method [Volume 2, Issue 2, 2015, Pages 145-150]
  • Three-dimensional free vibration A Semi-analytical Solution for 3-D Dynamic Analysis of Thick Continuously Graded Carbon Nanotube-reinforced Annular Plates Resting on a Two-parameter Elastic Foundation [Volume 1, Issue 2, 2014, Pages 113-130]
  • Three-phase composite cylinder Effects of Magnetic Field in Creep Behavior of Three-Phase Laminated Composite Cylindrical Shells [Volume 6, Issue 1, 2019, Pages 51-56]
  • Three-point bending test Flexural Behavior of Fiber–Metal Laminates Reinforced with Surface-Functionalized Nanoclay [Volume 5, Issue 2, 2018, Pages 149-156]
  • Three-point bending test Delamination Analysis in Composite Root of a Carbon-Layer Reinforced Wind Turbine Blade [Volume 6, Issue 1, 2019, Pages 9-18]
  • Tibia bovine bone Study of High-cycle Fatigue Properties in Tibia Bovine Bones based on Reliability and Scatter-band Predictions [(Articles in Press)]
  • Timoshenko Transverse Vibration for Non-uniform Timoshenko Nano-beams [Volume 2, Issue 1, 2015, Pages 1-16]
  • Timoshenko beams An Investigation of Stress and Deformation Behavior of Functionally Graded Timoshenko Beams subjected to Thermo-Mechanical Load [(Articles in Press)]
  • Timoshenko nano-beam Nonlocal Buckling and Vibration Analysis of Triple-Walled ZnO Piezoelectric Timoshenko Nano-beam Subjected to Magneto-Electro-Thermo-Mechanical Loadings [Volume 2, Issue 2, 2015, Pages 113-126]
  • Titanium/Hydroxyapatite Experimental Investigation of FGM Dental Implant Properties Made from Ti/HA Composite [Volume 4, Issue 3, 2017, Pages 233-237]
  • Transient Transient Thermal Stresses Analysis in a FPGM Cylinder [Volume 6, Issue 2, 2019, Pages 81-94]
  • Tran-sient dynamic Semi Analytical Transient Dynamic Analysis of Composite Adhesive Single-lap Joints [(Articles in Press)]
  • Transversely isotropic material Elasto-Thermodiffusive Response in a Two-Dimensional Transversely Isotropic Medium [Volume 6, Issue 2, 2019, Pages 95-104]
  • Trapezoidal shape factor A New Three-Dimensional Refined Higher-Order Theory for Free Vibration Analysis of Composite Circular Cylindrical Shells [Volume 6, Issue 2, 2019, Pages 201-223]
  • Trigonometric Ritz method Free Vibration Analysis of Composite Plates with Artificial Springs by Trigonometric Ritz Method [Volume 1, Issue 1, 2014, Pages 61-70]
  • Trigonometric shear deformation theory Static Flexure of Soft Core Sandwich Beams using Trigonometric Shear Deformation Theory [Volume 2, Issue 1, 2015, Pages 45-53]
  • Trigonometric shear deformation theory Precision Closed-form Solution for Out-of-plane Vibration of Rectangular Plates via Trigonometric Shear Deformation Theory [Volume 3, Issue 1, 2016, Pages 31-43]
  • Triple-walled ZnO piezoelectric Nonlocal Buckling and Vibration Analysis of Triple-Walled ZnO Piezoelectric Timoshenko Nano-beam Subjected to Magneto-Electro-Thermo-Mechanical Loadings [Volume 2, Issue 2, 2015, Pages 113-126]
  • Turbojet Engine Thermoelastic Analysis of Compressor Spool in Turbojet Engine and Redesign it Using Functionally Graded Materials with Opti-mal Coefficients [Volume 6, Issue 2, 2019, Pages 167-179]
  • Two-parameter elastic foundations A Semi-analytical Solution for 3-D Dynamic Analysis of Thick Continuously Graded Carbon Nanotube-reinforced Annular Plates Resting on a Two-parameter Elastic Foundation [Volume 1, Issue 2, 2014, Pages 113-130]
  • Two-parameter micromechanical model of agglomeration Three-dimensional elasticity solution for vibrational analysis of thick continuously graded sandwich plates with different boundary conditions using a two-parameter micromechanical model for agglomeration [Volume 5, Issue 1, 2018, Pages 49-66]

U

  • Unified formulation An Investigation of Stress and Deformation Behavior of Functionally Graded Timoshenko Beams subjected to Thermo-Mechanical Load [(Articles in Press)]
  • Unit cell Distribution of Residual Stresses in Polymer Reinforced Carbon Nanotubes and Laminated Carbon Fibers [Volume 4, Issue 1, 2017, Pages 9-18]
  • Unit cell Propagation of Matrix Cracking and Induced Delaminatin in Cross-Ply Composite Beams Subjected to Bending Loads [Volume 6, Issue 1, 2019, Pages 45-50]

V

W

  • Wave propagation Mesh-free Dynamic Analyses of FGM Sandwich Plates Resting on A Pasternak Elastic Foundation [Volume 4, Issue 2, 2017, Pages 153-168]
  • Wavy carbon nanotube Static and Free Vibration Analyses of Functionally Graded Nano-composite Plates Reinforced by Wavy Carbon Nanotubes Resting on a Pasternak Elastic Foundation [Volume 3, Issue 2, 2016, Pages 123-135]
  • Wear A Comparative Study on the Microstructure and Mechanical Prop-erties of Al-Si-Cu/1wt %NCP composites after T6 Heat Treatment [(Articles in Press)]
  • Wear Behavior Sintered Steel Composites Reinforced with Ceramic Nanoparticles: Fabrication, Characteristics and Wear Behavior [Volume 6, Issue 2, 2019, Pages 191-200]
  • Withstanding Properties Geometric Effects on Nanopore Creation in Graphene and on the Impact-withstanding Efficiency of Graphene Nanosheets [Volume 5, Issue 1, 2018, Pages 91-102]
  • Worn Morphology Mechanical Characterization and Wear Behavior of Nano TiO2 Particulates Reinforced Al7075 Alloy Composites [(Articles in Press)]

Y

  • Young's Modulus Effect of Curvature on the Mechanical Properties of Graphene: A Density Functional Tight-binding Approach [Volume 3, Issue 1, 2016, Pages 9-13]

Z

  • Zeolite Improving the Performance of Porous Concrete Composites Using Zeolite as a Coarse Grain [Volume 5, Issue 2, 2018, Pages 157-163]