Abdulkareem, M. T.Mechanical, Crystallographic, and Microstructural Analysis of Polymer Composites Developed from Iron Filings and Polystyrene Wastes [Volume 9, Issue 1, 2022, Pages 137-145]
Abdulkareem, S. A.Mechanical, Crystallographic, and Microstructural Analysis of Polymer Composites Developed from Iron Filings and Polystyrene Wastes [Volume 9, Issue 1, 2022, Pages 137-145]
Adeniyi, A. G.Mechanical, Crystallographic, and Microstructural Analysis of Polymer Composites Developed from Iron Filings and Polystyrene Wastes [Volume 9, Issue 1, 2022, Pages 137-145]
Aghayari, Reza Experimental Investigating to Increases the Fire Resistance of the Ultra-High-Performance Concrete by using Hybrid Fibers [Volume 9, Issue 2, 2022, Pages 377-386]
Ahmadi, Hamed Crashworthiness Study of an Innovative Helmet Liner Composed of an Auxetic Lattice Structure and PU Foam [Volume 9, Issue 1, 2022, Pages 25-35]
Ahmadvand, Ahmad An Analytical Study on the Indentation of a Layered Composite Beam and its Utilization in Low Velocity Impact Response [Volume 9, Issue 1, 2022, Pages 155-162]
Akumalla, Ravi Kiran Active Vibration Control of Laminated Composite Beam Operating in Thermal Environment using PZT-5H Patches [Volume 9, Issue 2, 2022, Pages 387-398]
Alfiyah, S. Physical and Mechanical Properties of Biodegradable Film from Taro Starch (Xanthosoma Sagittifolium) and Duck Bone Gelatin [Volume 9, Issue 2, 2022, Pages 213-220]
Alinejad, Javad 3D Numerical Simulation of Fibers Arrangement Effects On Thermal Conductivity of Polymer Matrix Composite [Volume 9, Issue 1, 2022, Pages 59-73]
Alinezhad, Ahmad Ali Free Vibration Analysis of Size-Dependent Multi-Layered Graphene Sheets Based on Strain Gradient Elasticity Theory [Volume 9, Issue 2, 2022, Pages 275-285]
Al-Mwanes, Ammar OudahExperimental Investigating to Increases the Fire Resistance of the Ultra-High-Performance Concrete by using Hybrid Fibers [Volume 9, Issue 2, 2022, Pages 377-386]
Amaniyah, M. Physical and Mechanical Properties of Biodegradable Film from Taro Starch (Xanthosoma Sagittifolium) and Duck Bone Gelatin [Volume 9, Issue 2, 2022, Pages 213-220]
Amosa, M. K.Mechanical, Crystallographic, and Microstructural Analysis of Polymer Composites Developed from Iron Filings and Polystyrene Wastes [Volume 9, Issue 1, 2022, Pages 137-145]
Arab Hasanabade, Majid Strengthening of One-Way Slabs Using Composite Laminates of HPFRCC Including Synthetic Fibers PPS [Volume 9, Issue 1, 2022, Pages 185-197]
Azadi, Mohammad Ultrasonic Assisted Drilling of Carbon Fiber Reinforced Plastic Composites with Non-Rotating Vibratory Tool [Volume 9, Issue 1, 2022, Pages 147-154]
Azarafza, Reza Investigation of Free Vibration of Laminated Composite Conical Shell with Local Attached Mass [Volume 9, Issue 1, 2022, Pages 173-184]
B
Baby, Riya Analysis of SH-waves Propagating in Multiferroic Structure with Interfacial Imperfection [Volume 9, Issue 1, 2022, Pages 1-10]
Baghani, Hossein Investigation of Free Vibration of Laminated Composite Conical Shell with Local Attached Mass [Volume 9, Issue 1, 2022, Pages 173-184]
Baharvandi, Hamidreza The Effect of Al Additive and Arc Melting Time on Synthesis of Ti3SiC2 MAX Phase using Ti/SiC/Al/Graphite [Volume 9, Issue 2, 2022, Pages 367-376]
Baroi, Juhi Analysis of SH-waves Propagating in Multiferroic Structure with Interfacial Imperfection [Volume 9, Issue 1, 2022, Pages 1-10]
Bhowmick, Shubhankar Thermo–Elastic Stresses and Deformation Analysis of FG Rotating Hollow Spherical Body [Volume 9, Issue 1, 2022, Pages 125-136]
Bohanon, Brandon Material Mechanical Properties Prediction of Layer with Multidirectional Fiber Ply Reinforced Polymer Matrix Composites [Volume 9, Issue 2, 2022, Pages 221-227]
Damania, Jay A Meshfree Approach for Bending Analysis of Porous Rectangular FGM Plate Resting on Elastic Foundation [Volume 9, Issue 2, 2022, Pages 303-316]
Dang, Van Hieu Buckling and Nonlinear Vibration of Functionally Graded Porous Micro-beam Resting on Elastic Foundation [Volume 9, Issue 1, 2022, Pages 75-88]
Davar, Ali Investigation of Free Vibration of Laminated Composite Conical Shell with Local Attached Mass [Volume 9, Issue 1, 2022, Pages 173-184]
Farahmandrad, Sahar Nonlinear Torsional Vibration Analysis of Nanorods in the Presence of Surface Energy Effect: Multi-Mode Galerkin Method [Volume 9, Issue 2, 2022, Pages 229-242]
G
Ghasemi, Ahmad Reza Thermal Variations of Thermo-Mechanical Loading Effects on Creep Stress and Strain Distribution in Multi-layered Composite Cylinder [Volume 9, Issue 1, 2022, Pages 115-123]
Hajinejad Sorkhi, Mohsen Analytical and Numerical Solution of Heat Transfer Equation in Rectangular Composite Fins [Volume 9, Issue 1, 2022, Pages 199-211]
Hassan, Md Mehadi Material Mechanical Properties Prediction of Layer with Multidirectional Fiber Ply Reinforced Polymer Matrix Composites [Volume 9, Issue 2, 2022, Pages 221-227]
Hossain, M. R.An Experimental and Numerical Approach of Polymer Composites Based on Jute-Bamboo Natural Fiber [Volume 9, Issue 1, 2022, Pages 105-113]
Hosseini, Mehdi An Analytical Study on the Indentation of a Layered Composite Beam and its Utilization in Low Velocity Impact Response [Volume 9, Issue 1, 2022, Pages 155-162]
Hosseini, Mohammad A Case Study on the Influence of Friction Coefficient and Rotational Speed on Transient Thermoelastic Response of FGM Rotating Cylinder [Volume 9, Issue 2, 2022, Pages 399-408]
Hosseinpour, Komeil Thermal Variations of Thermo-Mechanical Loading Effects on Creep Stress and Strain Distribution in Multi-layered Composite Cylinder [Volume 9, Issue 1, 2022, Pages 115-123]
I
Iftitah, R. Physical and Mechanical Properties of Biodegradable Film from Taro Starch (Xanthosoma Sagittifolium) and Duck Bone Gelatin [Volume 9, Issue 2, 2022, Pages 213-220]
Ighalo, J. O.Mechanical, Crystallographic, and Microstructural Analysis of Polymer Composites Developed from Iron Filings and Polystyrene Wastes [Volume 9, Issue 1, 2022, Pages 137-145]
Imani, Kazem Crashworthiness Study of an Innovative Helmet Liner Composed of an Auxetic Lattice Structure and PU Foam [Volume 9, Issue 1, 2022, Pages 25-35]
Islam, M. T.An Experimental and Numerical Approach of Polymer Composites Based on Jute-Bamboo Natural Fiber [Volume 9, Issue 1, 2022, Pages 105-113]
Jafari, Ali Asghar Nonlinear Vibration of Rotating Laminated Composite Cross-ply Cylindrical Shell on Nonlinear Rotating Elastic Foundation [Volume 9, Issue 2, 2022, Pages 317-334]
Jangi, Reza Experimental Study of Buckling of Reinforced Conical Composite Shell Under Hydrostatic Loading [Volume 9, Issue 2, 2022, Pages 359-366]
K
Kallannavar, Vinayak Active Vibration Control of Laminated Composite Beam Operating in Thermal Environment using PZT-5H Patches [Volume 9, Issue 2, 2022, Pages 387-398]
Kami, Abdolvahed Deposition of an Al/SiC Composite Coating on Steel by Friction Surfacing: Corrosion and Wear Properties [Volume 9, Issue 2, 2022, Pages 287-296]
Karimi, Mahdi Free Vibration Analysis of Size-Dependent Multi-Layered Graphene Sheets Based on Strain Gradient Elasticity Theory [Volume 9, Issue 2, 2022, Pages 275-285]
Karuppanan, Saravanan Finite Element Analysis of Mechanical Properties of Basalt-Carbon Epoxy Hybrid Laminates [Volume 9, Issue 2, 2022, Pages 263-274]
Kattimani, Subhaschandra Active Vibration Control of Laminated Composite Beam Operating in Thermal Environment using PZT-5H Patches [Volume 9, Issue 2, 2022, Pages 387-398]
Khani, Mohammadreza Synthesis and Characterization of MgF2/Cu Coating on Aluminum Produced by Sputtering Technique [Volume 9, Issue 2, 2022, Pages 297-302]
Kheyroddin, Ali Strengthening of One-Way Slabs Using Composite Laminates of HPFRCC Including Synthetic Fibers PPS [Volume 9, Issue 1, 2022, Pages 185-197]
Khirzin, M. H.Physical and Mechanical Properties of Biodegradable Film from Taro Starch (Xanthosoma Sagittifolium) and Duck Bone Gelatin [Volume 9, Issue 2, 2022, Pages 213-220]
Khorshidi, Korosh Free Vibration Analysis of Size-Dependent Multi-Layered Graphene Sheets Based on Strain Gradient Elasticity Theory [Volume 9, Issue 2, 2022, Pages 275-285]
Koohestani, Hassan Synthesis and Characterization of MgF2/Cu Coating on Aluminum Produced by Sputtering Technique [Volume 9, Issue 2, 2022, Pages 297-302]
Koohi Faegh Dehkourdi, Reza A Case Study on the Influence of Friction Coefficient and Rotational Speed on Transient Thermoelastic Response of FGM Rotating Cylinder [Volume 9, Issue 2, 2022, Pages 399-408]
Kotasthane, Atharva M.Finite Element Analysis of Mechanical Properties of Basalt-Carbon Epoxy Hybrid Laminates [Volume 9, Issue 2, 2022, Pages 263-274]
Kozekanan, Behnam SalmanyThe Effect of Al Additive and Arc Melting Time on Synthesis of Ti3SiC2 MAX Phase using Ti/SiC/Al/Graphite [Volume 9, Issue 2, 2022, Pages 367-376]
Kumar, Chandan A Meshfree Approach for Bending Analysis of Porous Rectangular FGM Plate Resting on Elastic Foundation [Volume 9, Issue 2, 2022, Pages 303-316]
Kumar, Rahul A Meshfree Approach for Bending Analysis of Porous Rectangular FGM Plate Resting on Elastic Foundation [Volume 9, Issue 2, 2022, Pages 303-316]
Kumar, Yajuvindra Effect of Elastically Restrained Edges on Free Transverse Vibration of Functionally Graded Porous Rectangular Plate [Volume 9, Issue 2, 2022, Pages 335-348]
L
Laksanawati, T. A.Physical and Mechanical Properties of Biodegradable Film from Taro Starch (Xanthosoma Sagittifolium) and Duck Bone Gelatin [Volume 9, Issue 2, 2022, Pages 213-220]
M
Madah, Zeinab Strengthening of One-Way Slabs Using Composite Laminates of HPFRCC Including Synthetic Fibers PPS [Volume 9, Issue 1, 2022, Pages 185-197]
M.G.M., Sabri Green Anticorrosion Coating with Low VOCs Emission using Moringa Oleifera Leaves Extract [Volume 9, Issue 1, 2022, Pages 163-171]
Mohammadrezazadeh, Shahin Nonlinear Vibration of Rotating Laminated Composite Cross-ply Cylindrical Shell on Nonlinear Rotating Elastic Foundation [Volume 9, Issue 2, 2022, Pages 317-334]
Moradkhani, Alireza The Effect of Al Additive and Arc Melting Time on Synthesis of Ti3SiC2 MAX Phase using Ti/SiC/Al/Graphite [Volume 9, Issue 2, 2022, Pages 367-376]
N
Naderi, Ali Asghar Crashworthiness Study of an Innovative Helmet Liner Composed of an Auxetic Lattice Structure and PU Foam [Volume 9, Issue 1, 2022, Pages 25-35]
Nazemnezhad, Reza Nonlinear Torsional Vibration Analysis of Nanorods in the Presence of Surface Energy Effect: Multi-Mode Galerkin Method [Volume 9, Issue 2, 2022, Pages 229-242]
Nguyen, Thi Hoa Buckling and Nonlinear Vibration of Functionally Graded Porous Micro-beam Resting on Elastic Foundation [Volume 9, Issue 1, 2022, Pages 75-88]
Nursabrina Mohd Nasir, Amirah Green Anticorrosion Coating with Low VOCs Emission using Moringa Oleifera Leaves Extract [Volume 9, Issue 1, 2022, Pages 163-171]
O
Omidi Bidgoli, Mostafa A Case Study on the Influence of Friction Coefficient and Rotational Speed on Transient Thermoelastic Response of FGM Rotating Cylinder [Volume 9, Issue 2, 2022, Pages 399-408]
P
Patil, Santosh S.Finite Element Analysis of Mechanical Properties of Basalt-Carbon Epoxy Hybrid Laminates [Volume 9, Issue 2, 2022, Pages 263-274]
Peiravi, Mohammad Mohsen 3D Numerical Simulation of Fibers Arrangement Effects On Thermal Conductivity of Polymer Matrix Composite [Volume 9, Issue 1, 2022, Pages 59-73]
Pendhari, Sandeep ShivramFunctionally Graded Piezoelectric Plates in Cylindrical Bending by Semi-analytical Approach [Volume 9, Issue 2, 2022, Pages 409-424]
Pradhan, Atharva A.Finite Element Analysis of Mechanical Properties of Basalt-Carbon Epoxy Hybrid Laminates [Volume 9, Issue 2, 2022, Pages 263-274]
R
Rafiquzzaman, M. An Experimental and Numerical Approach of Polymer Composites Based on Jute-Bamboo Natural Fiber [Volume 9, Issue 1, 2022, Pages 105-113]
Rostamiyan, Yasser Analytical and Numerical Solution of Heat Transfer Equation in Rectangular Composite Fins [Volume 9, Issue 1, 2022, Pages 199-211]
S
Saadatfar, Mahdi Transient Solution of Heat and Moisture Transfer in a Functionally Graded Hollow Cylinder with Finite Length [Volume 9, Issue 1, 2022, Pages 49-57]
Sahu, Rakesh KumarThermo–Elastic Stresses and Deformation Analysis of FG Rotating Hollow Spherical Body [Volume 9, Issue 1, 2022, Pages 125-136]
Saini, Kuldeep Active Vibration Control of Laminated Composite Beam Operating in Thermal Environment using PZT-5H Patches [Volume 9, Issue 2, 2022, Pages 387-398]
Salmaniannezhad, Hassan Synthesis and Characterization of MgF2/Cu Coating on Aluminum Produced by Sputtering Technique [Volume 9, Issue 2, 2022, Pages 297-302]
Salmaniannezhad, Hossein Synthesis and Characterization of MgF2/Cu Coating on Aluminum Produced by Sputtering Technique [Volume 9, Issue 2, 2022, Pages 297-302]
Sawarkar, Sameer SubhashFunctionally Graded Piezoelectric Plates in Cylindrical Bending by Semi-analytical Approach [Volume 9, Issue 2, 2022, Pages 409-424]
Sayyad, Atteshamuddin S.A New Higher-Order Shear and Normal Deformation Theory for the Free Vibration Analysis of Laminated Shells [Volume 9, Issue 1, 2022, Pages 89-104]
Seyedraoufi, Seyedmahdi Simulation and Optimization of Fatigue Life of Carbon-Epoxy Composite Sub Frame [Volume 9, Issue 1, 2022, Pages 37-47]
Shaikh, Asad A.Finite Element Analysis of Mechanical Properties of Basalt-Carbon Epoxy Hybrid Laminates [Volume 9, Issue 2, 2022, Pages 263-274]
Shinde, Bharti M.A New Higher-Order Shear and Normal Deformation Theory for the Free Vibration Analysis of Laminated Shells [Volume 9, Issue 1, 2022, Pages 89-104]
Siddique, Abu BakarMaterial Mechanical Properties Prediction of Layer with Multidirectional Fiber Ply Reinforced Polymer Matrix Composites [Volume 9, Issue 2, 2022, Pages 221-227]
Singh, Jeeoot A Meshfree Approach for Bending Analysis of Porous Rectangular FGM Plate Resting on Elastic Foundation [Volume 9, Issue 2, 2022, Pages 303-316]
Singh, Jigyasa A Meshfree Approach for Bending Analysis of Porous Rectangular FGM Plate Resting on Elastic Foundation [Volume 9, Issue 2, 2022, Pages 303-316]
Singh, Mukesh A Meshfree Approach for Bending Analysis of Porous Rectangular FGM Plate Resting on Elastic Foundation [Volume 9, Issue 2, 2022, Pages 303-316]
Singhal, Abhinav Analysis of SH-waves Propagating in Multiferroic Structure with Interfacial Imperfection [Volume 9, Issue 1, 2022, Pages 1-10]
S.M., Syaizwadi Green Anticorrosion Coating with Low VOCs Emission using Moringa Oleifera Leaves Extract [Volume 9, Issue 1, 2022, Pages 163-171]
Soltani, Masoumeh A Novel Approach for Lateral Buckling Assessment of Double Tapered Thin-Walled Laminated Composite I-Beams [Volume 9, Issue 1, 2022, Pages 11-23]
Sondhi, Lakshman Thermo–Elastic Stresses and Deformation Analysis of FG Rotating Hollow Spherical Body [Volume 9, Issue 1, 2022, Pages 125-136]
Sultana, Mafruza Analysis of SH-waves Propagating in Multiferroic Structure with Interfacial Imperfection [Volume 9, Issue 1, 2022, Pages 1-10]
T
Tabaghi, Armi Deposition of an Al/SiC Composite Coating on Steel by Friction Surfacing: Corrosion and Wear Properties [Volume 9, Issue 2, 2022, Pages 287-296]
Talebitoot, Roohollah Simulation and Optimization of Fatigue Life of Carbon-Epoxy Composite Sub Frame [Volume 9, Issue 1, 2022, Pages 37-47]
Tavakoli, Hossein Deposition of an Al/SiC Composite Coating on Steel by Friction Surfacing: Corrosion and Wear Properties [Volume 9, Issue 2, 2022, Pages 287-296]
Thawait, Amit KumarThermo–Elastic Stresses and Deformation Analysis of FG Rotating Hollow Spherical Body [Volume 9, Issue 1, 2022, Pages 125-136]
V
Vahabi Meibodi, Mohammad Hossein Experimental Study of Buckling of Reinforced Conical Composite Shell Under Hydrostatic Loading [Volume 9, Issue 2, 2022, Pages 359-366]
