A
-
Abdulkareem, M. T.
Mechanical, Crystallographic, and Microstructural Analysis of Polymer Composites Developed from Iron Filings and Polystyrene Wastes [Volume 9, Issue 1, 2022, Pages 137-145]
-
Abdulkareem, S. A.
Mechanical, Crystallographic, and Microstructural Analysis of Polymer Composites Developed from Iron Filings and Polystyrene Wastes [Volume 9, Issue 1, 2022, Pages 137-145]
-
Abdullah, َAmir
Ultrasonic Assisted Drilling of Carbon Fiber Reinforced Plastic Composites with Non-Rotating Vibratory Tool [Volume 9, Issue 1, 2022, Pages 147-154]
-
Adeniyi, A. G.
Mechanical, Crystallographic, and Microstructural Analysis of Polymer Composites Developed from Iron Filings and Polystyrene Wastes [Volume 9, Issue 1, 2022, Pages 137-145]
-
Aghayari, Reza
Experimental Investigating to Increases the Fire Resistance of the Ultra-High-Performance Concrete by using Hybrid Fibers [Volume 9, Issue 2, 2022, Pages 377-386]
-
Ahmadi, Hamed
Crashworthiness Study of an Innovative Helmet Liner Composed of an Auxetic Lattice Structure and PU Foam [Volume 9, Issue 1, 2022, Pages 25-35]
-
Ahmadvand, Ahmad
An Analytical Study on the Indentation of a Layered Composite Beam and its Utilization in Low Velocity Impact Response [Volume 9, Issue 1, 2022, Pages 155-162]
-
Akgul, Yasin
Mechanical and Tribological Behaviors of Chopped Carbon/Glass Fiber Reinforced Hybrid Epoxy Composites [Volume 9, Issue 2, 2022, Pages 349-358]
-
Akumalla, Ravi Kiran
Active Vibration Control of Laminated Composite Beam Operating in Thermal Environment using PZT-5H Patches [Volume 9, Issue 2, 2022, Pages 387-398]
-
Alfiyah, S.
Physical and Mechanical Properties of Biodegradable Film from Taro Starch (Xanthosoma Sagittifolium) and Duck Bone Gelatin [Volume 9, Issue 2, 2022, Pages 213-220]
-
Alinejad, Javad
3D Numerical Simulation of Fibers Arrangement Effects On Thermal Conductivity of Polymer Matrix Composite [Volume 9, Issue 1, 2022, Pages 59-73]
-
Alinezhad, Ahmad Ali
Free Vibration Analysis of Size-Dependent Multi-Layered Graphene Sheets Based on Strain Gradient Elasticity Theory [Volume 9, Issue 2, 2022, Pages 275-285]
-
Al-Mwanes, Ammar Oudah
Experimental Investigating to Increases the Fire Resistance of the Ultra-High-Performance Concrete by using Hybrid Fibers [Volume 9, Issue 2, 2022, Pages 377-386]
-
Alsbaale, Yousef Alyaas Younes
Mechanical and Tribological Behaviors of Chopped Carbon/Glass Fiber Reinforced Hybrid Epoxy Composites [Volume 9, Issue 2, 2022, Pages 349-358]
-
Amaniyah, M.
Physical and Mechanical Properties of Biodegradable Film from Taro Starch (Xanthosoma Sagittifolium) and Duck Bone Gelatin [Volume 9, Issue 2, 2022, Pages 213-220]
-
Amosa, M. K.
Mechanical, Crystallographic, and Microstructural Analysis of Polymer Composites Developed from Iron Filings and Polystyrene Wastes [Volume 9, Issue 1, 2022, Pages 137-145]
-
Arab Hasanabade, Majid
Strengthening of One-Way Slabs Using Composite Laminates of HPFRCC Including Synthetic Fibers PPS [Volume 9, Issue 1, 2022, Pages 185-197]
-
Azadi, Mohammad
Ultrasonic Assisted Drilling of Carbon Fiber Reinforced Plastic Composites with Non-Rotating Vibratory Tool [Volume 9, Issue 1, 2022, Pages 147-154]
-
Azarafza, Reza
Investigation of Free Vibration of Laminated Composite Conical Shell with Local Attached Mass [Volume 9, Issue 1, 2022, Pages 173-184]
B
-
Baby, Riya
Analysis of SH-waves Propagating in Multiferroic Structure with Interfacial Imperfection [Volume 9, Issue 1, 2022, Pages 1-10]
-
Baghani, Hossein
Investigation of Free Vibration of Laminated Composite Conical Shell with Local Attached Mass [Volume 9, Issue 1, 2022, Pages 173-184]
-
Baharvandi, Hamidreza
The Effect of Al Additive and Arc Melting Time on Synthesis of Ti3SiC2 MAX Phase using Ti/SiC/Al/Graphite [Volume 9, Issue 2, 2022, Pages 367-376]
-
Baroi, Juhi
Analysis of SH-waves Propagating in Multiferroic Structure with Interfacial Imperfection [Volume 9, Issue 1, 2022, Pages 1-10]
-
Bhowmick, Shubhankar
Thermo–Elastic Stresses and Deformation Analysis of FG Rotating Hollow Spherical Body [Volume 9, Issue 1, 2022, Pages 125-136]
-
Bohanon, Brandon
Material Mechanical Properties Prediction of Layer with Multidirectional Fiber Ply Reinforced Polymer Matrix Composites [Volume 9, Issue 2, 2022, Pages 221-227]
C
-
Cug, Harun
Mechanical and Tribological Behaviors of Chopped Carbon/Glass Fiber Reinforced Hybrid Epoxy Composites [Volume 9, Issue 2, 2022, Pages 349-358]
D
-
Damania, Jay
A Meshfree Approach for Bending Analysis of Porous Rectangular FGM Plate Resting on Elastic Foundation [Volume 9, Issue 2, 2022, Pages 303-316]
-
Dang, Van Hieu
Buckling and Nonlinear Vibration of Functionally Graded Porous Micro-beam Resting on Elastic Foundation [Volume 9, Issue 1, 2022, Pages 75-88]
-
Davar, Ali
Investigation of Free Vibration of Laminated Composite Conical Shell with Local Attached Mass [Volume 9, Issue 1, 2022, Pages 173-184]
E
-
Eticha, Andinet Kumella
Mechanical and Tribological Behaviors of Chopped Carbon/Glass Fiber Reinforced Hybrid Epoxy Composites [Volume 9, Issue 2, 2022, Pages 349-358]
F
-
Farahmandrad, Sahar
Nonlinear Torsional Vibration Analysis of Nanorods in the Presence of Surface Energy Effect: Multi-Mode Galerkin Method [Volume 9, Issue 2, 2022, Pages 229-242]
G
-
Ghasemi, Ahmad Reza
Thermal Variations of Thermo-Mechanical Loading Effects on Creep Stress and Strain Distribution in Multi-layered Composite Cylinder [Volume 9, Issue 1, 2022, Pages 115-123]
H
-
Hajialimohammadi, Alireza
Ultrasonic Assisted Drilling of Carbon Fiber Reinforced Plastic Composites with Non-Rotating Vibratory Tool [Volume 9, Issue 1, 2022, Pages 147-154]
-
Hajinejad Sorkhi, Mohsen
Analytical and Numerical Solution of Heat Transfer Equation in Rectangular Composite Fins [Volume 9, Issue 1, 2022, Pages 199-211]
-
Hassan, Md Mehadi
Material Mechanical Properties Prediction of Layer with Multidirectional Fiber Ply Reinforced Polymer Matrix Composites [Volume 9, Issue 2, 2022, Pages 221-227]
-
Hossain, M. R.
An Experimental and Numerical Approach of Polymer Composites Based on Jute-Bamboo Natural Fiber [Volume 9, Issue 1, 2022, Pages 105-113]
-
Hosseini, Mehdi
An Analytical Study on the Indentation of a Layered Composite Beam and its Utilization in Low Velocity Impact Response [Volume 9, Issue 1, 2022, Pages 155-162]
-
Hosseini, Mohammad
A Case Study on the Influence of Friction Coefficient and Rotational Speed on Transient Thermoelastic Response of FGM Rotating Cylinder [Volume 9, Issue 2, 2022, Pages 399-408]
-
Hosseinpour, Komeil
Thermal Variations of Thermo-Mechanical Loading Effects on Creep Stress and Strain Distribution in Multi-layered Composite Cylinder [Volume 9, Issue 1, 2022, Pages 115-123]
I
-
Iftitah, R.
Physical and Mechanical Properties of Biodegradable Film from Taro Starch (Xanthosoma Sagittifolium) and Duck Bone Gelatin [Volume 9, Issue 2, 2022, Pages 213-220]
-
Ighalo, J. O.
Mechanical, Crystallographic, and Microstructural Analysis of Polymer Composites Developed from Iron Filings and Polystyrene Wastes [Volume 9, Issue 1, 2022, Pages 137-145]
-
Imani, Kazem
Crashworthiness Study of an Innovative Helmet Liner Composed of an Auxetic Lattice Structure and PU Foam [Volume 9, Issue 1, 2022, Pages 25-35]
-
Islam, M. T.
An Experimental and Numerical Approach of Polymer Composites Based on Jute-Bamboo Natural Fiber [Volume 9, Issue 1, 2022, Pages 105-113]
J
-
Jadidi, Tohid
Ultrasonic Assisted Drilling of Carbon Fiber Reinforced Plastic Composites with Non-Rotating Vibratory Tool [Volume 9, Issue 1, 2022, Pages 147-154]
-
Jafari, Ali Asghar
Nonlinear Vibration of Rotating Laminated Composite Cross-ply Cylindrical Shell on Nonlinear Rotating Elastic Foundation [Volume 9, Issue 2, 2022, Pages 317-334]
-
Jangi, Reza
Experimental Study of Buckling of Reinforced Conical Composite Shell Under Hydrostatic Loading [Volume 9, Issue 2, 2022, Pages 359-366]
K
-
Kallannavar, Vinayak
Active Vibration Control of Laminated Composite Beam Operating in Thermal Environment using PZT-5H Patches [Volume 9, Issue 2, 2022, Pages 387-398]
-
Kami, Abdolvahed
Deposition of an Al/SiC Composite Coating on Steel by Friction Surfacing: Corrosion and Wear Properties [Volume 9, Issue 2, 2022, Pages 287-296]
-
Karimi, Mahdi
Free Vibration Analysis of Size-Dependent Multi-Layered Graphene Sheets Based on Strain Gradient Elasticity Theory [Volume 9, Issue 2, 2022, Pages 275-285]
-
Karuppanan, Saravanan
Finite Element Analysis of Mechanical Properties of Basalt-Carbon Epoxy Hybrid Laminates [Volume 9, Issue 2, 2022, Pages 263-274]
-
Kattimani, Subhaschandra
Active Vibration Control of Laminated Composite Beam Operating in Thermal Environment using PZT-5H Patches [Volume 9, Issue 2, 2022, Pages 387-398]
-
Khani, Mohammadreza
Synthesis and Characterization of MgF2/Cu Coating on Aluminum Produced by Sputtering Technique [Volume 9, Issue 2, 2022, Pages 297-302]
-
Khare, Sumit
Numerical Investigation on Free Vibration Response of Bi-Directional Porous Functionally Graded Circular/Annular Plates [Volume 9, Issue 2, 2022, Pages 243-262]
-
Kheyroddin, Ali
Strengthening of One-Way Slabs Using Composite Laminates of HPFRCC Including Synthetic Fibers PPS [Volume 9, Issue 1, 2022, Pages 185-197]
-
Khirzin, M. H.
Physical and Mechanical Properties of Biodegradable Film from Taro Starch (Xanthosoma Sagittifolium) and Duck Bone Gelatin [Volume 9, Issue 2, 2022, Pages 213-220]
-
Khorshidi, Korosh
Free Vibration Analysis of Size-Dependent Multi-Layered Graphene Sheets Based on Strain Gradient Elasticity Theory [Volume 9, Issue 2, 2022, Pages 275-285]
-
Koohestani, Hassan
Synthesis and Characterization of MgF2/Cu Coating on Aluminum Produced by Sputtering Technique [Volume 9, Issue 2, 2022, Pages 297-302]
-
Koohi Faegh Dehkourdi, Reza
A Case Study on the Influence of Friction Coefficient and Rotational Speed on Transient Thermoelastic Response of FGM Rotating Cylinder [Volume 9, Issue 2, 2022, Pages 399-408]
-
Kotasthane, Atharva M.
Finite Element Analysis of Mechanical Properties of Basalt-Carbon Epoxy Hybrid Laminates [Volume 9, Issue 2, 2022, Pages 263-274]
-
Kozekanan, Behnam Salmany
The Effect of Al Additive and Arc Melting Time on Synthesis of Ti3SiC2 MAX Phase using Ti/SiC/Al/Graphite [Volume 9, Issue 2, 2022, Pages 367-376]
-
Kumar, Chandan
A Meshfree Approach for Bending Analysis of Porous Rectangular FGM Plate Resting on Elastic Foundation [Volume 9, Issue 2, 2022, Pages 303-316]
-
Kumar, Rahul
Numerical Investigation on Free Vibration Response of Bi-Directional Porous Functionally Graded Circular/Annular Plates [Volume 9, Issue 2, 2022, Pages 243-262]
-
Kumar, Rahul
A Meshfree Approach for Bending Analysis of Porous Rectangular FGM Plate Resting on Elastic Foundation [Volume 9, Issue 2, 2022, Pages 303-316]
-
Kumar, Yajuvindra
Effect of Elastically Restrained Edges on Free Transverse Vibration of Functionally Graded Porous Rectangular Plate [Volume 9, Issue 2, 2022, Pages 335-348]
L
-
Laksanawati, T. A.
Physical and Mechanical Properties of Biodegradable Film from Taro Starch (Xanthosoma Sagittifolium) and Duck Bone Gelatin [Volume 9, Issue 2, 2022, Pages 213-220]
M
-
Madah, Zeinab
Strengthening of One-Way Slabs Using Composite Laminates of HPFRCC Including Synthetic Fibers PPS [Volume 9, Issue 1, 2022, Pages 185-197]
-
Malguri, Akhilesh
Numerical Investigation on Free Vibration Response of Bi-Directional Porous Functionally Graded Circular/Annular Plates [Volume 9, Issue 2, 2022, Pages 243-262]
-
M.G.M., Sabri
Green Anticorrosion Coating with Low VOCs Emission using Moringa Oleifera Leaves Extract [Volume 9, Issue 1, 2022, Pages 163-171]
-
Mohammadrezazadeh, Shahin
Nonlinear Vibration of Rotating Laminated Composite Cross-ply Cylindrical Shell on Nonlinear Rotating Elastic Foundation [Volume 9, Issue 2, 2022, Pages 317-334]
-
Moradkhani, Alireza
The Effect of Al Additive and Arc Melting Time on Synthesis of Ti3SiC2 MAX Phase using Ti/SiC/Al/Graphite [Volume 9, Issue 2, 2022, Pages 367-376]
N
-
Naderi, Ali Asghar
Crashworthiness Study of an Innovative Helmet Liner Composed of an Auxetic Lattice Structure and PU Foam [Volume 9, Issue 1, 2022, Pages 25-35]
-
Nazemnezhad, Reza
Nonlinear Torsional Vibration Analysis of Nanorods in the Presence of Surface Energy Effect: Multi-Mode Galerkin Method [Volume 9, Issue 2, 2022, Pages 229-242]
-
Nguyen, Thi Hoa
Buckling and Nonlinear Vibration of Functionally Graded Porous Micro-beam Resting on Elastic Foundation [Volume 9, Issue 1, 2022, Pages 75-88]
-
Nursabrina Mohd Nasir, Amirah
Green Anticorrosion Coating with Low VOCs Emission using Moringa Oleifera Leaves Extract [Volume 9, Issue 1, 2022, Pages 163-171]
O
-
Omidi Bidgoli, Mostafa
A Case Study on the Influence of Friction Coefficient and Rotational Speed on Transient Thermoelastic Response of FGM Rotating Cylinder [Volume 9, Issue 2, 2022, Pages 399-408]
P
-
Patil, Santosh S.
Finite Element Analysis of Mechanical Properties of Basalt-Carbon Epoxy Hybrid Laminates [Volume 9, Issue 2, 2022, Pages 263-274]
-
Peiravi, Mohammad Mohsen
3D Numerical Simulation of Fibers Arrangement Effects On Thermal Conductivity of Polymer Matrix Composite [Volume 9, Issue 1, 2022, Pages 59-73]
-
Pendhari, Sandeep Shivram
Functionally Graded Piezoelectric Plates in Cylindrical Bending by Semi-analytical Approach [Volume 9, Issue 2, 2022, Pages 409-424]
-
Pradhan, Atharva A.
Finite Element Analysis of Mechanical Properties of Basalt-Carbon Epoxy Hybrid Laminates [Volume 9, Issue 2, 2022, Pages 263-274]
R
-
Rafiquzzaman, M.
An Experimental and Numerical Approach of Polymer Composites Based on Jute-Bamboo Natural Fiber [Volume 9, Issue 1, 2022, Pages 105-113]
-
Rostamiyan, Yasser
Analytical and Numerical Solution of Heat Transfer Equation in Rectangular Composite Fins [Volume 9, Issue 1, 2022, Pages 199-211]
S
-
Saadatfar, Mahdi
Transient Solution of Heat and Moisture Transfer in a Functionally Graded Hollow Cylinder with Finite Length [Volume 9, Issue 1, 2022, Pages 49-57]
-
Sahu, Rakesh Kumar
Thermo–Elastic Stresses and Deformation Analysis of FG Rotating Hollow Spherical Body [Volume 9, Issue 1, 2022, Pages 125-136]
-
Saini, Kuldeep
Active Vibration Control of Laminated Composite Beam Operating in Thermal Environment using PZT-5H Patches [Volume 9, Issue 2, 2022, Pages 387-398]
-
Salmaniannezhad, Hassan
Synthesis and Characterization of MgF2/Cu Coating on Aluminum Produced by Sputtering Technique [Volume 9, Issue 2, 2022, Pages 297-302]
-
Salmaniannezhad, Hossein
Synthesis and Characterization of MgF2/Cu Coating on Aluminum Produced by Sputtering Technique [Volume 9, Issue 2, 2022, Pages 297-302]
-
Sawarkar, Sameer Subhash
Functionally Graded Piezoelectric Plates in Cylindrical Bending by Semi-analytical Approach [Volume 9, Issue 2, 2022, Pages 409-424]
-
Sayyad, Atteshamuddin S.
A New Higher-Order Shear and Normal Deformation Theory for the Free Vibration Analysis of Laminated Shells [Volume 9, Issue 1, 2022, Pages 89-104]
-
Seyedraoufi, Seyedmahdi
Simulation and Optimization of Fatigue Life of Carbon-Epoxy Composite Sub Frame [Volume 9, Issue 1, 2022, Pages 37-47]
-
Shaikh, Asad A.
Finite Element Analysis of Mechanical Properties of Basalt-Carbon Epoxy Hybrid Laminates [Volume 9, Issue 2, 2022, Pages 263-274]
-
Shinde, Bharti M.
A New Higher-Order Shear and Normal Deformation Theory for the Free Vibration Analysis of Laminated Shells [Volume 9, Issue 1, 2022, Pages 89-104]
-
Siddique, Abu Bakar
Material Mechanical Properties Prediction of Layer with Multidirectional Fiber Ply Reinforced Polymer Matrix Composites [Volume 9, Issue 2, 2022, Pages 221-227]
-
Singh, Jeeoot
A Meshfree Approach for Bending Analysis of Porous Rectangular FGM Plate Resting on Elastic Foundation [Volume 9, Issue 2, 2022, Pages 303-316]
-
Singh, Jigyasa
A Meshfree Approach for Bending Analysis of Porous Rectangular FGM Plate Resting on Elastic Foundation [Volume 9, Issue 2, 2022, Pages 303-316]
-
Singh, Mukesh
A Meshfree Approach for Bending Analysis of Porous Rectangular FGM Plate Resting on Elastic Foundation [Volume 9, Issue 2, 2022, Pages 303-316]
-
Singhal, Abhinav
Analysis of SH-waves Propagating in Multiferroic Structure with Interfacial Imperfection [Volume 9, Issue 1, 2022, Pages 1-10]
-
S.M., Syaizwadi
Green Anticorrosion Coating with Low VOCs Emission using Moringa Oleifera Leaves Extract [Volume 9, Issue 1, 2022, Pages 163-171]
-
Soltani, Masoumeh
A Novel Approach for Lateral Buckling Assessment of Double Tapered Thin-Walled Laminated Composite I-Beams [Volume 9, Issue 1, 2022, Pages 11-23]
-
Sondhi, Lakshman
Thermo–Elastic Stresses and Deformation Analysis of FG Rotating Hollow Spherical Body [Volume 9, Issue 1, 2022, Pages 125-136]
-
Sultana, Mafruza
Analysis of SH-waves Propagating in Multiferroic Structure with Interfacial Imperfection [Volume 9, Issue 1, 2022, Pages 1-10]
T
-
Tabaghi, Armi
Deposition of an Al/SiC Composite Coating on Steel by Friction Surfacing: Corrosion and Wear Properties [Volume 9, Issue 2, 2022, Pages 287-296]
-
Talebitoot, Roohollah
Simulation and Optimization of Fatigue Life of Carbon-Epoxy Composite Sub Frame [Volume 9, Issue 1, 2022, Pages 37-47]
-
Tavakoli, Hossein
Deposition of an Al/SiC Composite Coating on Steel by Friction Surfacing: Corrosion and Wear Properties [Volume 9, Issue 2, 2022, Pages 287-296]
-
Thawait, Amit Kumar
Thermo–Elastic Stresses and Deformation Analysis of FG Rotating Hollow Spherical Body [Volume 9, Issue 1, 2022, Pages 125-136]
V
-
Vahabi Meibodi, Mohammad Hossein
Experimental Study of Buckling of Reinforced Conical Composite Shell Under Hydrostatic Loading [Volume 9, Issue 2, 2022, Pages 359-366]
-
Vasara, Dilsukh
Numerical Investigation on Free Vibration Response of Bi-Directional Porous Functionally Graded Circular/Annular Plates [Volume 9, Issue 2, 2022, Pages 243-262]
W
-
W.A.W., Rafizah
Green Anticorrosion Coating with Low VOCs Emission using Moringa Oleifera Leaves Extract [Volume 9, Issue 1, 2022, Pages 163-171]
-
W.M.K.W.M., Ikhmal
Green Anticorrosion Coating with Low VOCs Emission using Moringa Oleifera Leaves Extract [Volume 9, Issue 1, 2022, Pages 163-171]
-
W.N.W.M., Norsani
Green Anticorrosion Coating with Low VOCs Emission using Moringa Oleifera Leaves Extract [Volume 9, Issue 1, 2022, Pages 163-171]
Z
-
Zamani, Jamal
Experimental Study of Buckling of Reinforced Conical Composite Shell Under Hydrostatic Loading [Volume 9, Issue 2, 2022, Pages 359-366]
-
Zannat, M.
An Experimental and Numerical Approach of Polymer Composites Based on Jute-Bamboo Natural Fiber [Volume 9, Issue 1, 2022, Pages 105-113]
Your query does not match with any item