A
-
Abdoos, Hassan
Sintered Steel Composites Reinforced with Ceramic Nanoparticles: Fabrication, Characteristics and Wear Behavior [Volume 6, Issue 2, 2019, Pages 191-200]
-
Ahmadi, Omid
Transient Thermal Stresses Analysis in a FPGM Cylinder [Volume 6, Issue 2, 2019, Pages 81-94]
-
Albooyeh, Alireza
Influence of Different Foaming Conditions on the Mechanical, Physical, and Structural Properties of Polypropylene Foam [Volume 6, Issue 2, 2019, Pages 225-237]
-
Alizadeh, Mohsen
Health Monitoring for Composite under Low-Cycle Cyclic Loading, Considering Effects of Acoustic Emission Sensor Type [Volume 6, Issue 1, 2019, Pages 19-26]
-
Alizadeh, Parisa
Numerical Crashworthiness Analysis of Graded Layered Foam- Filled Tubes Under Axial Loading [Volume 6, Issue 1, 2019, Pages 57-64]
-
Amirjan, Mostafa
The Role of Natural Additives on the Wear and Friction Proper-ties of Nanocomposites for Friction Applications [Volume 6, Issue 2, 2019, Pages 159-165]
-
Arefi, Mohammad
The Effect of Temperature Dependency on the Thermo-Electro-Elastic Analysis of Functionally Graded Piezoelectric Spherical Shell [Volume 6, Issue 1, 2019, Pages 1-8]
-
Asgari, Masoud
Crushing Analysis of Empty and Foam-Filled Cylindrical and Conical Corrugated Composite Tubes [Volume 6, Issue 1, 2019, Pages 35-44]
-
Ashory, Mohammad Reza
Vibration Analysis of Circular Single-Layer Graphene Sheet Using Finite Element Method [Volume 6, Issue 2, 2019, Pages 131-138]
-
Azadi, Mohammad
Health Monitoring for Composite under Low-Cycle Cyclic Loading, Considering Effects of Acoustic Emission Sensor Type [Volume 6, Issue 1, 2019, Pages 19-26]
B
-
Bahrami, Mohammad
Propagation of Matrix Cracking and Induced Delaminatin in Cross-Ply Composite Beams Subjected to Bending Loads [Volume 6, Issue 1, 2019, Pages 45-50]
-
Bakhshi, Arsalan
Study on Compression and Flexural Behavior of ABS-SiO2 Poly-mer Matrix Composite Fabricated by Hot Extrusion [Volume 6, Issue 2, 2019, Pages 239-247]
D
-
Dashtbayazi, M. R.
Nonlinear Vibration Analysis of the Composite Cable using Perturbation Method and the Green-Lagrangian Nonlinear Strain [Volume 6, Issue 1, 2019, Pages 27-34]
-
Davar, Ali
A New Three-Dimensional Refined Higher-Order Theory for Free Vibration Analysis of Composite Circular Cylindrical Shells [Volume 6, Issue 2, 2019, Pages 201-223]
-
Doddamani, Saleemsab
Effect of Aging on Fracture Toughness of Al6061-Graphite Particulate Composites [Volume 6, Issue 2, 2019, Pages 139-146]
E
-
Ekhteraei Toussi, Hamid
Delamination Analysis in Composite Root of a Carbon-Layer Reinforced Wind Turbine Blade [Volume 6, Issue 1, 2019, Pages 9-18]
-
Eskandarzadeh, Shahin
Influence of Different Foaming Conditions on the Mechanical, Physical, and Structural Properties of Polypropylene Foam [Volume 6, Issue 2, 2019, Pages 225-237]
-
Eslami-Farsani, R.
Investigation of Tensile Characteristics of an Epoxy Matrix Com-posite with Uni-Directional and Hybrid Tissue Natural Hemp Fibers [Volume 6, Issue 2, 2019, Pages 181-190]
F
-
Fallah, Famida
Non-Linear Analysis of Functionally Graded Sector Plates with Simply Supported Radial Edges Under Transverse Loading [Volume 6, Issue 1, 2019, Pages 65-74]
-
Farrokhabadi, Amin
Propagation of Matrix Cracking and Induced Delaminatin in Cross-Ply Composite Beams Subjected to Bending Loads [Volume 6, Issue 1, 2019, Pages 45-50]
G
-
Ghasemi, Ahmad Reza
Discrepancies Between Free Vibration of FML and Composite Cylindrical Shells Reinforced by CNTs [Volume 6, Issue 2, 2019, Pages 105-115]
-
Ghasemi, Ahmad Reza
Effects of Magnetic Field in Creep Behavior of Three-Phase Laminated Composite Cylindrical Shells [Volume 6, Issue 1, 2019, Pages 51-56]
-
Ghasemi, Behrooz
Investigation of Hardness, Morphology and Structural Analysis of NiCrBSi Composite Coating on Plain Carbon Steel [Volume 6, Issue 2, 2019, Pages 75-80]
-
Ghasemi Ghalebahman, Ahmad
Delamination Analysis in Composite Root of a Carbon-Layer Reinforced Wind Turbine Blade [Volume 6, Issue 1, 2019, Pages 9-18]
-
Ghazifard, Payman
Numerical Crashworthiness Analysis of Graded Layered Foam- Filled Tubes Under Axial Loading [Volume 6, Issue 1, 2019, Pages 57-64]
H
-
Habibi, Nabard
Transient Thermal Stresses Analysis in a FPGM Cylinder [Volume 6, Issue 2, 2019, Pages 81-94]
-
Hayati, Sajad
Investigation of Tensile Characteristics of an Epoxy Matrix Com-posite with Uni-Directional and Hybrid Tissue Natural Hemp Fibers [Volume 6, Issue 2, 2019, Pages 181-190]
-
Hosseinpour, Komeil
Effects of Magnetic Field in Creep Behavior of Three-Phase Laminated Composite Cylindrical Shells [Volume 6, Issue 1, 2019, Pages 51-56]
J
-
Jafari, Seyed Mohammad
Health Monitoring for Composite under Low-Cycle Cyclic Loading, Considering Effects of Acoustic Emission Sensor Type [Volume 6, Issue 1, 2019, Pages 19-26]
-
Jaferzadeh Khoramabadian, Ali Asghar
Investigation of Tensile Characteristics of an Epoxy Matrix Com-posite with Uni-Directional and Hybrid Tissue Natural Hemp Fibers [Volume 6, Issue 2, 2019, Pages 181-190]
K
-
Kaleemulla K, Mohamed
Effect of Aging on Fracture Toughness of Al6061-Graphite Particulate Composites [Volume 6, Issue 2, 2019, Pages 139-146]
-
Kanoria, M.
Elasto-Thermodiffusive Response in a Two-Dimensional Transversely Isotropic Medium [Volume 6, Issue 2, 2019, Pages 95-104]
-
Karimi, Mahdi
Analytical Approach for Thermo-electro-mechanical Vibration of Piezoelectric Nanoplates Resting on Elastic Foundations based on Nonlocal Theory [Volume 6, Issue 2, 2019, Pages 117-129]
-
Karimi, Mohamadhadi
Non-Linear Analysis of Functionally Graded Sector Plates with Simply Supported Radial Edges Under Transverse Loading [Volume 6, Issue 1, 2019, Pages 65-74]
-
Keshvari Tabatabaie, Fereshteh Sadat
Investigation of Hardness, Morphology and Structural Analysis of NiCrBSi Composite Coating on Plain Carbon Steel [Volume 6, Issue 2, 2019, Pages 75-80]
-
Khalili, S. Mohammad Reza
Investigation of Tensile Characteristics of an Epoxy Matrix Com-posite with Uni-Directional and Hybrid Tissue Natural Hemp Fibers [Volume 6, Issue 2, 2019, Pages 181-190]
-
Khatibi, Mohammad Mahdi
Vibration Analysis of Circular Single-Layer Graphene Sheet Using Finite Element Method [Volume 6, Issue 2, 2019, Pages 131-138]
-
Khodabakhsh, Rasoul
Nonlinear Vibration Analysis of the Composite Cable using Perturbation Method and the Green-Lagrangian Nonlinear Strain [Volume 6, Issue 1, 2019, Pages 27-34]
-
Khorshidi, Korosh
Analytical Approach for Thermo-electro-mechanical Vibration of Piezoelectric Nanoplates Resting on Elastic Foundations based on Nonlocal Theory [Volume 6, Issue 2, 2019, Pages 117-129]
-
Kohandani, Reza
A New Three-Dimensional Refined Higher-Order Theory for Free Vibration Analysis of Composite Circular Cylindrical Shells [Volume 6, Issue 2, 2019, Pages 201-223]
M
-
Mahbod, Mahshid
Crushing Analysis of Empty and Foam-Filled Cylindrical and Conical Corrugated Composite Tubes [Volume 6, Issue 1, 2019, Pages 35-44]
-
Mehrabani, Mahboube
Vibration Analysis of Circular Single-Layer Graphene Sheet Using Finite Element Method [Volume 6, Issue 2, 2019, Pages 131-138]
-
Mirzaee, Omid
Investigation of Hardness, Morphology and Structural Analysis of NiCrBSi Composite Coating on Plain Carbon Steel [Volume 6, Issue 2, 2019, Pages 75-80]
-
Moazzeni, Mostafa
Nonlocal Analysis of Longitudinal Dynamic Behavior of Nanobars with Surface Energy Effect [Volume 6, Issue 2, 2019, Pages 147-158]
-
Mohammad Panahiha, Hamid
A New Three-Dimensional Refined Higher-Order Theory for Free Vibration Analysis of Composite Circular Cylindrical Shells [Volume 6, Issue 2, 2019, Pages 201-223]
-
Mohammadzadeh Gonabadi, Arash
Improving the Performance of the Sandwich Panel with the Corrugated Core Filled with Metal Foam: Mathematical and Numerical Methods [Volume 6, Issue 2, 2019, Pages 249-261]
-
Mohandes, Masood
Discrepancies Between Free Vibration of FML and Composite Cylindrical Shells Reinforced by CNTs [Volume 6, Issue 2, 2019, Pages 105-115]
-
Mousavi, Arash
Influence of Different Foaming Conditions on the Mechanical, Physical, and Structural Properties of Polypropylene Foam [Volume 6, Issue 2, 2019, Pages 225-237]
N
-
Najibi, Amir
Numerical Crashworthiness Analysis of Graded Layered Foam- Filled Tubes Under Axial Loading [Volume 6, Issue 1, 2019, Pages 57-64]
-
Nazemnezhad, Reza
Nonlocal Analysis of Longitudinal Dynamic Behavior of Nanobars with Surface Energy Effect [Volume 6, Issue 2, 2019, Pages 147-158]
-
Nouri Damghani, Mohammad
Improving the Performance of the Sandwich Panel with the Corrugated Core Filled with Metal Foam: Mathematical and Numerical Methods [Volume 6, Issue 2, 2019, Pages 249-261]
R
-
Rostamiyan, Yasser
Study on Compression and Flexural Behavior of ABS-SiO2 Poly-mer Matrix Composite Fabricated by Hot Extrusion [Volume 6, Issue 2, 2019, Pages 239-247]
S
-
Sadeghinezhad, M. S.
Thermoelastic Analysis of Compressor Spool in Turbojet Engine and Redesign it Using Functionally Graded Materials with Opti-mal Coefficients [Volume 6, Issue 2, 2019, Pages 167-179]
-
Sadeghzadeh, Sadegh
Vibration Analysis of Circular Single-Layer Graphene Sheet Using Finite Element Method [Volume 6, Issue 2, 2019, Pages 131-138]
-
Safari Naderi, Mohammad Hadi
Delamination Analysis in Composite Root of a Carbon-Layer Reinforced Wind Turbine Blade [Volume 6, Issue 1, 2019, Pages 9-18]
-
Sakiani, Hassan
The Role of Natural Additives on the Wear and Friction Proper-ties of Nanocomposites for Friction Applications [Volume 6, Issue 2, 2019, Pages 159-165]
-
Samawati, Sadi
Transient Thermal Stresses Analysis in a FPGM Cylinder [Volume 6, Issue 2, 2019, Pages 81-94]
-
Sayar, Hassan
Health Monitoring for Composite under Low-Cycle Cyclic Loading, Considering Effects of Acoustic Emission Sensor Type [Volume 6, Issue 1, 2019, Pages 19-26]
-
Shahriari, Behrooz
Thermoelastic Analysis of Compressor Spool in Turbojet Engine and Redesign it Using Functionally Graded Materials with Opti-mal Coefficients [Volume 6, Issue 2, 2019, Pages 167-179]
-
Sur, Abhik
Elasto-Thermodiffusive Response in a Two-Dimensional Transversely Isotropic Medium [Volume 6, Issue 2, 2019, Pages 95-104]
T
-
Takhayor Ardestani, Masoud
The Effect of Temperature Dependency on the Thermo-Electro-Elastic Analysis of Functionally Graded Piezoelectric Spherical Shell [Volume 6, Issue 1, 2019, Pages 1-8]
Y
-
Yousefi, Shahram
Thermoelastic Analysis of Compressor Spool in Turbojet Engine and Redesign it Using Functionally Graded Materials with Opti-mal Coefficients [Volume 6, Issue 2, 2019, Pages 167-179]
Your query does not match with any item