A
-
Aamir, Muhammad Talha
Experimental Investigation and Simulation of Electro-Mechanical Behaviour of Hybrid Sandwich Composite Radomes for Aerospace Applications [Volume 11, Issue 2, 2024, Pages 401-412]
-
Abdullah, Orhan Sabah
Investigation of Thermal Fatigue Behavior for HDPE Composites Reinforced by Nano Alumina [Volume 11, Issue 2, 2024, Pages 335-340]
-
Afzali Alvars, Hamed
Interfacial Characteristics of Graphene/Polymer Nanocomposites by Molecular Dynamics Simulation and Evaluating Effects of that on Mechanical Properties of Nanocomposites by FEM [Volume 11, Issue 2, 2024, Pages 321-334]
-
Allaee, Mohammad Hossein
Experimental and Numerical Investigation of the Effect of Embedding Steel Wires inside the Foam of GFRP/Foam Sandwich Panel under Three-Point Bending Load [Volume 11, Issue 2, 2024, Pages 271-280]
-
Amiri, Farzad
Experimental and Numerical Investigation of the Effect of Embedding Steel Wires inside the Foam of GFRP/Foam Sandwich Panel under Three-Point Bending Load [Volume 11, Issue 2, 2024, Pages 271-280]
-
Amoochi, Abbas
Numerical Optimization of Non-destructive Ultrasonic Testing in Identifying Defects in Composite Structure of Pine Tree Trunk [Volume 11, Issue 1, 2024, Pages 249-258]
B
-
Babu, Jalumedi
Multi-response Optimization while Drilling of Composite Laminate with Core Drill by Grey Entropy Fuzzy (GEF) Method [Volume 11, Issue 2, 2024, Pages 483-502]
-
Bangera, Mithil
Evaluation of Heat Resistance Characteristics of Fibrous Material for Cold Weather Application [Volume 11, Issue 1, 2024, Pages 231-238]
-
Basati, F.
Dynamic and Buckling Analysis of Hybrid Composite Beam Strengthened with Carbon Fibers/Aramid Fibers under Temperature Gradient [Volume 11, Issue 1, 2024, Pages 203-216]
-
Bayat Kazazi, Mahdi
Numerical Optimization of Non-destructive Ultrasonic Testing in Identifying Defects in Composite Structure of Pine Tree Trunk [Volume 11, Issue 1, 2024, Pages 249-258]
-
Benammar, Samir
Failure Probability Analysis of Composite Pressure Tanks Using Subset Simulation [Volume 11, Issue 2, 2024, Pages 363-374]
-
Biradar, Akash
Effect of Chilling & B4C content on Machining Efficiency and Surface Quality in Wire-Cut Machining of Aluminum Matrix Chilled Composites [Volume 11, Issue 2, 2024, Pages 341-350]
-
Biswas, Amalendu
Higher Order Approximations for Bending of FG Beams Using B-Spline Collocation Technique [Volume 11, Issue 1, 2024, Pages 159-176]
-
Bridjesh, P.
Comparison of Deflection in Two-Directional Functionally Graded Tapered Beam [Volume 11, Issue 1, 2024, Pages 191-202]
C
-
Chakrabarti, Anupam
Response of Agglomerated SWCNT Reinforced Nanocomposite Plate under Hygro-Thermal Loading [Volume 11, Issue 1, 2024, Pages 11-40]
-
Chavan, Yash
Evaluation of Heat Resistance Characteristics of Fibrous Material for Cold Weather Application [Volume 11, Issue 1, 2024, Pages 231-238]
-
Chikkanna, Anil Kyathasandra
Effect of Chilling & B4C content on Machining Efficiency and Surface Quality in Wire-Cut Machining of Aluminum Matrix Chilled Composites [Volume 11, Issue 2, 2024, Pages 341-350]
E
-
Eroglu, Mehmet
Multifunctional Properties of Metal Fibers Reinforced Polymer Composites – A Review [Volume 11, Issue 1, 2024, Pages 217-230]
-
Eskandari Jam, Jafar
Experimental and Numerical Investigation of the Effect of Embedding Steel Wires inside the Foam of GFRP/Foam Sandwich Panel under Three-Point Bending Load [Volume 11, Issue 2, 2024, Pages 271-280]
F
-
Fayzulla, Bayan Jabbar
Multifunctional Properties of Metal Fibers Reinforced Polymer Composites – A Review [Volume 11, Issue 1, 2024, Pages 217-230]
-
Feli, Saeed
Analytical Modeling of Functionally Graded Carbon Nanotube-Reinforced Composite Plates under Low-Velocity Impact [Volume 11, Issue 2, 2024, Pages 281-294]
G
-
Ghaderi, Mohammad Reza
Numerical Optimization of Non-destructive Ultrasonic Testing in Identifying Defects in Composite Structure of Pine Tree Trunk [Volume 11, Issue 1, 2024, Pages 249-258]
-
Ghadimi, Mojtaba
Elastoplastic Analysis of Pressurized FG rotating Thick Cylinders Based on High-Order Shear Deformation Theory and Radial Return Method [Volume 11, Issue 1, 2024, Pages 119-130]
-
Ghannad, Mehdi
Elastoplastic Analysis of Pressurized FG rotating Thick Cylinders Based on High-Order Shear Deformation Theory and Radial Return Method [Volume 11, Issue 1, 2024, Pages 119-130]
-
Gharaei, Amin
Parametric Analysis of Position and Direction of Laminated Composite C-Spar on Aeroelastic Flutter in Aircraft Tail [Volume 11, Issue 2, 2024, Pages 351-362]
-
Ghasemi, Ahmad Reza
Parametric Analysis of Position and Direction of Laminated Composite C-Spar on Aeroelastic Flutter in Aircraft Tail [Volume 11, Issue 2, 2024, Pages 351-362]
-
Golmakani, Mohammad Esmaiel
Nonlinear Dynamic Analysis of Annular FG Porous Sandwich Plates Reinforced by Graphene Platelets [Volume 11, Issue 1, 2024, Pages 131-148]
-
Govindhan Radhakrishnan, Rajesh Kanna
Optimization of AA6351-SiC-B4C Hybrid Composites in Wire EDM Using Grey Relation Technique [Volume 11, Issue 2, 2024, Pages 385-400]
-
Gupta, Sneha
Initial Buckling Behavior of Elastically Supported Rectangular FGM Plate based on Higher Order Shear Deformation Theory via Spline RBF Method [Volume 11, Issue 1, 2024, Pages 59-72]
H
-
Hariharan, Sreeram
Optimization of AA6351-SiC-B4C Hybrid Composites in Wire EDM Using Grey Relation Technique [Volume 11, Issue 2, 2024, Pages 385-400]
I
-
Iourzikene, Zouhir
Failure Probability Analysis of Composite Pressure Tanks Using Subset Simulation [Volume 11, Issue 2, 2024, Pages 363-374]
-
Iqbal, Zafar
Experimental Investigation and Simulation of Electro-Mechanical Behaviour of Hybrid Sandwich Composite Radomes for Aerospace Applications [Volume 11, Issue 2, 2024, Pages 401-412]
J
-
Jafari, Hojat
Nonlinear Dynamic Analysis of Annular FG Porous Sandwich Plates Reinforced by Graphene Platelets [Volume 11, Issue 1, 2024, Pages 131-148]
-
Jafari, Seyed Sajad
Analytical Modeling of Functionally Graded Carbon Nanotube-Reinforced Composite Plates under Low-Velocity Impact [Volume 11, Issue 2, 2024, Pages 281-294]
-
Jandaghian, Ali-Akbar
Nonlinear Torsional Vibration of Size-Dependent Functionally Graded Rods [Volume 11, Issue 1, 2024, Pages 41-58]
-
Jawaid, S. M. Ali
Response of Agglomerated SWCNT Reinforced Nanocomposite Plate under Hygro-Thermal Loading [Volume 11, Issue 1, 2024, Pages 11-40]
-
Jayappa, Kumaraswamy
Effect of Chilling & B4C content on Machining Efficiency and Surface Quality in Wire-Cut Machining of Aluminum Matrix Chilled Composites [Volume 11, Issue 2, 2024, Pages 341-350]
-
Jha, Vinay Chandra
Polyester/Kota Stone Dust Composite: A Comprehensive Investigation of Mechanical and Sliding Wear Properties [Volume 11, Issue 2, 2024, Pages 375-384]
-
Jhala, Ramdevsinh Lalubha
Mechanical Characterization of Glass-Basalt Hybrid Composites with Different Fiber Weight Fraction [Volume 11, Issue 2, 2024, Pages 295-308]
K
-
Karimi, Bromand
Analytical Modeling of Functionally Graded Carbon Nanotube-Reinforced Composite Plates under Low-Velocity Impact [Volume 11, Issue 2, 2024, Pages 281-294]
-
Kaurase, Kalpit P
Influence of Filler Content on the Mechanical, Thermal, Moisture Absorption, and Biodegradability Properties of Bionanocomposite with Cellulosic Fibers Derived from Delonix Regia Fruits [Volume 11, Issue 1, 2024, Pages 73-86]
-
Khan, Sikander
Initial Buckling Behavior of Elastically Supported Rectangular FGM Plate based on Higher Order Shear Deformation Theory via Spline RBF Method [Volume 11, Issue 1, 2024, Pages 59-72]
-
Khorshidi, Korosh
Static Buckling and Free Vibration Analysis of Bi-Dimensional FG Metal Ceramic Porous Beam [Volume 11, Issue 1, 2024, Pages 149-158]
-
Kumar, Manoj
Short Literature Survey on Fiber-Reinforced Hybrid Composites [Volume 11, Issue 2, 2024, Pages 425-452]
-
Kumar, Rahul
Initial Buckling Behavior of Elastically Supported Rectangular FGM Plate based on Higher Order Shear Deformation Theory via Spline RBF Method [Volume 11, Issue 1, 2024, Pages 59-72]
-
Kumar, Santosh
Short Literature Survey on Fiber-Reinforced Hybrid Composites [Volume 11, Issue 2, 2024, Pages 425-452]
-
Kumshikar, Radhakrishna R
Experimental and Numerical Analysis of Woven Bamboo and Jute Fiber Reinforced in Epoxy Composites [Volume 11, Issue 1, 2024, Pages 103-118]
-
Kureel, Saurabh
Crashworthy Behavior of Plain Weave Glass/Epoxy Composite Tubes Containing Different Extents of Overlap of Dropped Plies [Volume 11, Issue 1, 2024, Pages 87-102]
M
-
Madarapu, Anjaiah
Multi-response Optimization while Drilling of Composite Laminate with Core Drill by Grey Entropy Fuzzy (GEF) Method [Volume 11, Issue 2, 2024, Pages 483-502]
-
Mahapatra, Deepak
Higher Order Approximations for Bending of FG Beams Using B-Spline Collocation Technique [Volume 11, Issue 1, 2024, Pages 159-176]
-
Mahdi, Akeel Zeki
Investigation of Thermal Fatigue Behavior for HDPE Composites Reinforced by Nano Alumina [Volume 11, Issue 2, 2024, Pages 335-340]
-
Mahesh, Vinyas
Influence of Graphene Powder on the Physio-Mechanical Properties of Jute Reinforced Epoxy Composites for Automobile Applications [Volume 11, Issue 1, 2024, Pages 239-248]
-
Mahesh, Vinyas
Development and Mechanical Characterization of Light Weight Fiber Metal Laminate using Jute, Kenaf and Aluminium [Volume 11, Issue 2, 2024, Pages 259-270]
-
Mahesh, Vishwas
Influence of Graphene Powder on the Physio-Mechanical Properties of Jute Reinforced Epoxy Composites for Automobile Applications [Volume 11, Issue 1, 2024, Pages 239-248]
-
Mahesh, Vishwas
Development and Mechanical Characterization of Light Weight Fiber Metal Laminate using Jute, Kenaf and Aluminium [Volume 11, Issue 2, 2024, Pages 259-270]
-
Malguri, Akhilesh
Initial Buckling Behavior of Elastically Supported Rectangular FGM Plate based on Higher Order Shear Deformation Theory via Spline RBF Method [Volume 11, Issue 1, 2024, Pages 59-72]
-
Mallik, Sadek Hossain
Generalized Thermoelastic Interactions Using an Eigenvalue Technique in a Transversely Isotropic Unbounded Medium with Memory Having a Line Heat Source [Volume 11, Issue 2, 2024, Pages 413-424]
-
Manjunath, Kuchangi Venkatappa
Effect of Chilling & B4C content on Machining Efficiency and Surface Quality in Wire-Cut Machining of Aluminum Matrix Chilled Composites [Volume 11, Issue 2, 2024, Pages 341-350]
-
Marimuthu, Uthayakumar
Optimization of AA6351-SiC-B4C Hybrid Composites in Wire EDM Using Grey Relation Technique [Volume 11, Issue 2, 2024, Pages 385-400]
-
Maurya, Madan Chandra
Response of Agglomerated SWCNT Reinforced Nanocomposite Plate under Hygro-Thermal Loading [Volume 11, Issue 1, 2024, Pages 11-40]
-
Mazdak, Siamak
Numerical Optimization of Non-destructive Ultrasonic Testing in Identifying Defects in Composite Structure of Pine Tree Trunk [Volume 11, Issue 1, 2024, Pages 249-258]
-
Mehdianfar, Pejman
Static Buckling and Free Vibration Analysis of Bi-Dimensional FG Metal Ceramic Porous Beam [Volume 11, Issue 1, 2024, Pages 149-158]
-
Mierzwiński, Dariusz
Optimization of AA6351-SiC-B4C Hybrid Composites in Wire EDM Using Grey Relation Technique [Volume 11, Issue 2, 2024, Pages 385-400]
-
Mirzaei, Jaber
Analyzing and Improving Flexural and Impact Strength of Composites Enhanced with Nanoparticles and Natural Fibers [Volume 11, Issue 2, 2024, Pages 467-482]
-
Molla, Md Abul Kashim
Generalized Thermoelastic Interactions Using an Eigenvalue Technique in a Transversely Isotropic Unbounded Medium with Memory Having a Line Heat Source [Volume 11, Issue 2, 2024, Pages 413-424]
-
Mondal, Samar Chandra
Higher Order Approximations for Bending of FG Beams Using B-Spline Collocation Technique [Volume 11, Issue 1, 2024, Pages 159-176]
-
Muneer Ahmed, Zhaib
Experimental Investigation and Simulation of Electro-Mechanical Behaviour of Hybrid Sandwich Composite Radomes for Aerospace Applications [Volume 11, Issue 2, 2024, Pages 401-412]
N
-
Nasir, Muhammad Ali
Experimental Investigation and Simulation of Electro-Mechanical Behaviour of Hybrid Sandwich Composite Radomes for Aerospace Applications [Volume 11, Issue 2, 2024, Pages 401-412]
-
Nazemnezhad, Reza
Nonlinear Torsional Vibration of Size-Dependent Functionally Graded Rods [Volume 11, Issue 1, 2024, Pages 41-58]
-
Nazemnezhad, Reza
A Semi-Analytical Nonlinear Approach for Size-Dependent Analysis of Longitudinal Vibration in Terms of Axially Functionally Graded Nanorods [Volume 11, Issue 2, 2024, Pages 453-466]
-
Nejatbakhsh, Hossein
Parametric Analysis of Position and Direction of Laminated Composite C-Spar on Aeroelastic Flutter in Aircraft Tail [Volume 11, Issue 2, 2024, Pages 351-362]
P
-
Pandey, Ayush
Initial Buckling Behavior of Elastically Supported Rectangular FGM Plate based on Higher Order Shear Deformation Theory via Spline RBF Method [Volume 11, Issue 1, 2024, Pages 59-72]
-
Patel, Shital
Evaluation of Heat Resistance Characteristics of Fibrous Material for Cold Weather Application [Volume 11, Issue 1, 2024, Pages 231-238]
-
Patil, Vinayak
Evaluation of Heat Resistance Characteristics of Fibrous Material for Cold Weather Application [Volume 11, Issue 1, 2024, Pages 231-238]
-
Paul, Lijo
Multi-response Optimization while Drilling of Composite Laminate with Core Drill by Grey Entropy Fuzzy (GEF) Method [Volume 11, Issue 2, 2024, Pages 483-502]
-
Periyasamy, Pitchaipillai
Microstructure & Mechanical Properties Evaluation of Al6082 /AlSi10Mg Composite for Light Weight Structural Applications [Volume 11, Issue 2, 2024, Pages 309-320]
-
Piri, Farideh
Preparation, Identification, and Evaluation of the Thermal Properties of Novolac Resins Modified with TiO2, MgO, and V2O5 Oxides [Volume 11, Issue 1, 2024, Pages 1-9]
Q
-
Qader, Ibrahim Nazem
Multifunctional Properties of Metal Fibers Reinforced Polymer Composites – A Review [Volume 11, Issue 1, 2024, Pages 217-230]
R
-
Rabieyan-Najafabadi, Hamid
Parametric Analysis of Position and Direction of Laminated Composite C-Spar on Aeroelastic Flutter in Aircraft Tail [Volume 11, Issue 2, 2024, Pages 351-362]
-
Rajak, Basudeb
Initial Buckling Behavior of Elastically Supported Rectangular FGM Plate based on Higher Order Shear Deformation Theory via Spline RBF Method [Volume 11, Issue 1, 2024, Pages 59-72]
-
Ramana, Maringanti Venkata
Multi-response Optimization while Drilling of Composite Laminate with Core Drill by Grey Entropy Fuzzy (GEF) Method [Volume 11, Issue 2, 2024, Pages 483-502]
-
Razavian Shad, Ehsan
Nonlinear Torsional Vibration of Size-Dependent Functionally Graded Rods [Volume 11, Issue 1, 2024, Pages 41-58]
-
Reddy, B. S.
Comparison of Deflection in Two-Directional Functionally Graded Tapered Beam [Volume 11, Issue 1, 2024, Pages 191-202]
-
Reddy, G. Chandra Mohana
Comparison of Deflection in Two-Directional Functionally Graded Tapered Beam [Volume 11, Issue 1, 2024, Pages 191-202]
-
Reddy, K. V. K.
Comparison of Deflection in Two-Directional Functionally Graded Tapered Beam [Volume 11, Issue 1, 2024, Pages 191-202]
-
Reddy, Mahadeva
Effect of Chilling & B4C content on Machining Efficiency and Surface Quality in Wire-Cut Machining of Aluminum Matrix Chilled Composites [Volume 11, Issue 2, 2024, Pages 341-350]
-
Rezaei Qazviniha, Mohsen
Preparation, Identification, and Evaluation of the Thermal Properties of Novolac Resins Modified with TiO2, MgO, and V2O5 Oxides [Volume 11, Issue 1, 2024, Pages 1-9]
S
-
Sarkar, Susenjit
Higher Order Approximations for Bending of FG Beams Using B-Spline Collocation Technique [Volume 11, Issue 1, 2024, Pages 159-176]
-
Seth, Tanmoy
Generalized Thermoelastic Interactions Using an Eigenvalue Technique in a Transversely Isotropic Unbounded Medium with Memory Having a Line Heat Source [Volume 11, Issue 2, 2024, Pages 413-424]
-
Shabani, Yasin
Static Buckling and Free Vibration Analysis of Bi-Dimensional FG Metal Ceramic Porous Beam [Volume 11, Issue 1, 2024, Pages 149-158]
-
Shankara Reddy, R.
Experimental and Numerical Analysis of Woven Bamboo and Jute Fiber Reinforced in Epoxy Composites [Volume 11, Issue 1, 2024, Pages 103-118]
-
Shanmugam, Suresh Kumar
Optimization of AA6351-SiC-B4C Hybrid Composites in Wire EDM Using Grey Relation Technique [Volume 11, Issue 2, 2024, Pages 385-400]
-
Sharma, Harish Kumar
Initial Buckling Behavior of Elastically Supported Rectangular FGM Plate based on Higher Order Shear Deformation Theory via Spline RBF Method [Volume 11, Issue 1, 2024, Pages 59-72]
-
Sheakholeslami, Mohammadreza
Numerical Optimization of Non-destructive Ultrasonic Testing in Identifying Defects in Composite Structure of Pine Tree Trunk [Volume 11, Issue 1, 2024, Pages 249-258]
-
Sid Amer, Youcef
Failure Probability Analysis of Composite Pressure Tanks Using Subset Simulation [Volume 11, Issue 2, 2024, Pages 363-374]
-
Singh, Dalbir
Influence of Filler Content on the Mechanical, Thermal, Moisture Absorption, and Biodegradability Properties of Bionanocomposite with Cellulosic Fibers Derived from Delonix Regia Fruits [Volume 11, Issue 1, 2024, Pages 73-86]
-
Singh, Rakesh
Polyester/Kota Stone Dust Composite: A Comprehensive Investigation of Mechanical and Sliding Wear Properties [Volume 11, Issue 2, 2024, Pages 375-384]
-
Soheil Shamaee, Mahsa
A Comprehensive Comparison between Multi-Objective Optimization Methods for Composite Hexagonal-Triangle Grid Structure using FSDT under External Hydrostatic Pressure [Volume 11, Issue 1, 2024, Pages 177-190]
-
Srivastava, Yash
Initial Buckling Behavior of Elastically Supported Rectangular FGM Plate based on Higher Order Shear Deformation Theory via Spline RBF Method [Volume 11, Issue 1, 2024, Pages 59-72]
-
Subramanyam, Burlakanti
Microstructure & Mechanical Properties Evaluation of Al6082 /AlSi10Mg Composite for Light Weight Structural Applications [Volume 11, Issue 2, 2024, Pages 309-320]
-
Sundaresan, Thirumalai Kumaran
Optimization of AA6351-SiC-B4C Hybrid Composites in Wire EDM Using Grey Relation Technique [Volume 11, Issue 2, 2024, Pages 385-400]
T
-
Taghipoor, Hossein
Analyzing and Improving Flexural and Impact Strength of Composites Enhanced with Nanoparticles and Natural Fibers [Volume 11, Issue 2, 2024, Pages 467-482]
-
Tee, Kong Fah
Failure Probability Analysis of Composite Pressure Tanks Using Subset Simulation [Volume 11, Issue 2, 2024, Pages 363-374]
V
-
V., Murari
Crashworthy Behavior of Plain Weave Glass/Epoxy Composite Tubes Containing Different Extents of Overlap of Dropped Plies [Volume 11, Issue 1, 2024, Pages 87-102]
-
Vyas, Chandreshkumar Jayantilal
Mechanical Characterization of Glass-Basalt Hybrid Composites with Different Fiber Weight Fraction [Volume 11, Issue 2, 2024, Pages 295-308]
W
-
Walter, Janusz
Optimization of AA6351-SiC-B4C Hybrid Composites in Wire EDM Using Grey Relation Technique [Volume 11, Issue 2, 2024, Pages 385-400]
Y
-
Yas, Mohammad Hossein
Dynamic and Buckling Analysis of Hybrid Composite Beam Strengthened with Carbon Fibers/Aramid Fibers under Temperature Gradient [Volume 11, Issue 1, 2024, Pages 203-216]
Z
-
Zeighami Salimabad, Mehdi
Numerical Optimization of Non-destructive Ultrasonic Testing in Identifying Defects in Composite Structure of Pine Tree Trunk [Volume 11, Issue 1, 2024, Pages 249-258]
Your query does not match with any item