Keyword Index

A

  • Adaptive PSO Algorithm Vibration Optimization of Fiber-Metal Laminated Composite Shallow Shell Panels Using an Adaptive PSO Algorithm [Volume 4, Issue 2, 2017, Pages 99-110]
  • Aggregated carbon nanotubes Free Vibration and Buckling Analyses of Functionally Graded Nanocomposite Plates Reinforced by Carbon Nanotube [Volume 4, Issue 1, 2017, Pages 59-73]
  • Analytical method A Numerical and Analytical Solution for the Free Vibration of Laminated Composites Using Different Plate Theories [Volume 4, Issue 1, 2017, Pages 75-87]
  • Analytical Solution On the Buckling the Behavior of a Multiphase Smart Plate based on a Higher-order Theory [Volume 4, Issue 1, 2017, Pages 47-58]

B

  • Ballistic impact Investigation into The Behavior of Nano-composite Tubes at Ballistic Impact [Volume 4, Issue 3, 2017, Pages 207-210]
  • Basalt Compression Analysis of Hollow Cylinder Basalt Continuous Filament Epoxy Composite Filled with Shape Memory Wire [Volume 4, Issue 3, 2017, Pages 225-232]
  • Biocompatible polymer Synthesis and Characterization of Polymer/Nanosilicagel Nano-composites [Volume 4, Issue 1, 2017, Pages 1-8]
  • Buckling Free Vibration and Buckling Analyses of Functionally Graded Nanocomposite Plates Reinforced by Carbon Nanotube [Volume 4, Issue 1, 2017, Pages 59-73]
  • Buckling load On the Buckling the Behavior of a Multiphase Smart Plate based on a Higher-order Theory [Volume 4, Issue 1, 2017, Pages 47-58]

C

  • Carbon fibre Improving Mechanical Properties of Nanocomposite-based Epoxy by High-impact Polystyrene and Multiwalled Carbon Nanotubes: Optimizing by a Mixture Design Approach [Volume 4, Issue 1, 2017, Pages 33-45]
  • Carbon nanotube Distribution of Residual Stresses in Polymer Reinforced Carbon Nanotubes and Laminated Carbon Fibers [Volume 4, Issue 1, 2017, Pages 9-18]
  • Composite cylindrical shell Investigation into The Behavior of Nano-composite Tubes at Ballistic Impact [Volume 4, Issue 3, 2017, Pages 207-210]
  • Compression Compression Analysis of Hollow Cylinder Basalt Continuous Filament Epoxy Composite Filled with Shape Memory Wire [Volume 4, Issue 3, 2017, Pages 225-232]
  • Compressive Properties Effects of Nanotube/Matrix Interface on Multi-Walled Carbon Nanotube Reinforced Polymer Mechanical Properties [Volume 4, Issue 3, 2017, Pages 211-223]
  • Connector Constraint Effects of Nanotube/Matrix Interface on Multi-Walled Carbon Nanotube Reinforced Polymer Mechanical Properties [Volume 4, Issue 3, 2017, Pages 211-223]
  • Couple stress theory Free Vibration Analysis of Size-Dependent, Functionally Graded, Rectangular Nano/Micro-plates based on Modified Nonlinear Couple Stress Shear Deformation Plate Theories [Volume 4, Issue 2, 2017, Pages 127-137]
  • Cylindrical shell Dynamic Characteristics of Joined Steel and Carbon Fiber-Reinforced Plastic Tubes: Experimental and Numerical Investigation [Volume 4, Issue 2, 2017, Pages 88-97]

D

  • Deep drawing Using the Taguchi Method for Experimental and Numerical Investigations on the Square-Cup Deep-Drawing Process for Aluminum/Steel Laminated Sheets [Volume 4, Issue 2, 2017, Pages 169-177]

E

  • Effective matrix Numerical Simulation of a Hybrid Nanocomposite Containing Ca-CO3 and Short Glass Fibers Subjected to Tensile Loading [Volume 4, Issue 2, 2017, Pages 117-125]

F

  • Fiber Metal Laminate Vibration Optimization of Fiber-Metal Laminated Composite Shallow Shell Panels Using an Adaptive PSO Algorithm [Volume 4, Issue 2, 2017, Pages 99-110]
  • Fiber metal laminates (FMLs) Environmental Effects on Mechanical Properties of Glass/Epoxy and Fiber Metal Laminates, Part I: Hygrothermal Aging [Volume 4, Issue 3, 2017, Pages 187-196]
  • Fiber metal laminates (FMLs) Environmental effects on mechanical properties of glass/epoxy and fiber metal laminates, Part II: Isothermal aging [Volume 4, Issue 3, 2017, Pages 197-205]
  • Finite element simulation Using the Taguchi Method for Experimental and Numerical Investigations on the Square-Cup Deep-Drawing Process for Aluminum/Steel Laminated Sheets [Volume 4, Issue 2, 2017, Pages 169-177]
  • First-order shear deformation theory Mesh-free Dynamic Analyses of FGM Sandwich Plates Resting on A Pasternak Elastic Foundation [Volume 4, Issue 2, 2017, Pages 153-168]
  • Flexural properties Environmental Effects on Mechanical Properties of Glass/Epoxy and Fiber Metal Laminates, Part I: Hygrothermal Aging [Volume 4, Issue 3, 2017, Pages 187-196]
  • Flexural properties Environmental effects on mechanical properties of glass/epoxy and fiber metal laminates, Part II: Isothermal aging [Volume 4, Issue 3, 2017, Pages 197-205]
  • Free vibration Free Vibration and Buckling Analyses of Functionally Graded Nanocomposite Plates Reinforced by Carbon Nanotube [Volume 4, Issue 1, 2017, Pages 59-73]
  • Free vibration Dynamic Characteristics of Joined Steel and Carbon Fiber-Reinforced Plastic Tubes: Experimental and Numerical Investigation [Volume 4, Issue 2, 2017, Pages 88-97]
  • Free vibration A Numerical and Analytical Solution for the Free Vibration of Laminated Composites Using Different Plate Theories [Volume 4, Issue 1, 2017, Pages 75-87]
  • Functional graded material Mesh-free Dynamic Analyses of FGM Sandwich Plates Resting on A Pasternak Elastic Foundation [Volume 4, Issue 2, 2017, Pages 153-168]
  • Functionally graded A Quasi-3D Polynomial Shear and Normal Deformation Theory for Laminated Composite, Sandwich, and Functionally Graded Beams [Volume 4, Issue 2, 2017, Pages 139-152]
  • Functionally graded Free Vibration Analysis of Size-Dependent, Functionally Graded, Rectangular Nano/Micro-plates based on Modified Nonlinear Couple Stress Shear Deformation Plate Theories [Volume 4, Issue 2, 2017, Pages 127-137]
  • Functionally graded materails Experimental Investigation of FGM Dental Implant Properties Made from Ti/HA Composite [Volume 4, Issue 3, 2017, Pages 233-237]

G

  • GDQEM Study of Laminated Composite MEMS and NEMS Performance in Nano Metric Operations [Volume 4, Issue 1, 2017, Pages 19-31]
  • GDQM Study of Laminated Composite MEMS and NEMS Performance in Nano Metric Operations [Volume 4, Issue 1, 2017, Pages 19-31]
  • Glass/epoxy composites Environmental Effects on Mechanical Properties of Glass/Epoxy and Fiber Metal Laminates, Part I: Hygrothermal Aging [Volume 4, Issue 3, 2017, Pages 187-196]
  • Glass/epoxy composites Environmental effects on mechanical properties of glass/epoxy and fiber metal laminates, Part II: Isothermal aging [Volume 4, Issue 3, 2017, Pages 197-205]

H

  • Higher-order plate theory On the Buckling the Behavior of a Multiphase Smart Plate based on a Higher-order Theory [Volume 4, Issue 1, 2017, Pages 47-58]
  • Hybrid Improving Mechanical Properties of Nanocomposite-based Epoxy by High-impact Polystyrene and Multiwalled Carbon Nanotubes: Optimizing by a Mixture Design Approach [Volume 4, Issue 1, 2017, Pages 33-45]
  • Hybrid composites Compression Analysis of Hollow Cylinder Basalt Continuous Filament Epoxy Composite Filled with Shape Memory Wire [Volume 4, Issue 3, 2017, Pages 225-232]
  • Hybrid thermoplastic nanocomposites Numerical Simulation of a Hybrid Nanocomposite Containing Ca-CO3 and Short Glass Fibers Subjected to Tensile Loading [Volume 4, Issue 2, 2017, Pages 117-125]
  • Hygrothermal aging Environmental Effects on Mechanical Properties of Glass/Epoxy and Fiber Metal Laminates, Part I: Hygrothermal Aging [Volume 4, Issue 3, 2017, Pages 187-196]

I

  • Impact properties Environmental Effects on Mechanical Properties of Glass/Epoxy and Fiber Metal Laminates, Part I: Hygrothermal Aging [Volume 4, Issue 3, 2017, Pages 187-196]
  • Impact properties Environmental effects on mechanical properties of glass/epoxy and fiber metal laminates, Part II: Isothermal aging [Volume 4, Issue 3, 2017, Pages 197-205]
  • Intraocular lenses Synthesis and Characterization of Polymer/Nanosilicagel Nano-composites [Volume 4, Issue 1, 2017, Pages 1-8]
  • Iso-thermal aging Environmental effects on mechanical properties of glass/epoxy and fiber metal laminates, Part II: Isothermal aging [Volume 4, Issue 3, 2017, Pages 197-205]

L

  • Laminate A Quasi-3D Polynomial Shear and Normal Deformation Theory for Laminated Composite, Sandwich, and Functionally Graded Beams [Volume 4, Issue 2, 2017, Pages 139-152]
  • Laminated Composite Study of Laminated Composite MEMS and NEMS Performance in Nano Metric Operations [Volume 4, Issue 1, 2017, Pages 19-31]
  • Laminated composites A Numerical and Analytical Solution for the Free Vibration of Laminated Composites Using Different Plate Theories [Volume 4, Issue 1, 2017, Pages 75-87]
  • Laminated sheet Using the Taguchi Method for Experimental and Numerical Investigations on the Square-Cup Deep-Drawing Process for Aluminum/Steel Laminated Sheets [Volume 4, Issue 2, 2017, Pages 169-177]
  • Laminates Improving Mechanical Properties of Nanocomposite-based Epoxy by High-impact Polystyrene and Multiwalled Carbon Nanotubes: Optimizing by a Mixture Design Approach [Volume 4, Issue 1, 2017, Pages 33-45]

M

  • Magneto-electro-elastic coupling On the Buckling the Behavior of a Multiphase Smart Plate based on a Higher-order Theory [Volume 4, Issue 1, 2017, Pages 47-58]
  • Mass Loss Open-Hole Size and Thermal Cycling Effects on Mass Loss and Surface Degradation of Polymer Matrix Composites [Volume 4, Issue 2, 2017, Pages 111-116]
  • Mechanical properties Improving Mechanical Properties of Nanocomposite-based Epoxy by High-impact Polystyrene and Multiwalled Carbon Nanotubes: Optimizing by a Mixture Design Approach [Volume 4, Issue 1, 2017, Pages 33-45]
  • MEMS and NEMS Study of Laminated Composite MEMS and NEMS Performance in Nano Metric Operations [Volume 4, Issue 1, 2017, Pages 19-31]
  • Mesh-free Mesh-free Dynamic Analyses of FGM Sandwich Plates Resting on A Pasternak Elastic Foundation [Volume 4, Issue 2, 2017, Pages 153-168]
  • Mixture Design Improving Mechanical Properties of Nanocomposite-based Epoxy by High-impact Polystyrene and Multiwalled Carbon Nanotubes: Optimizing by a Mixture Design Approach [Volume 4, Issue 1, 2017, Pages 33-45]
  • Mode shape Dynamic Characteristics of Joined Steel and Carbon Fiber-Reinforced Plastic Tubes: Experimental and Numerical Investigation [Volume 4, Issue 2, 2017, Pages 88-97]
  • Mori–Tanaka approach Free Vibration and Buckling Analyses of Functionally Graded Nanocomposite Plates Reinforced by Carbon Nanotube [Volume 4, Issue 1, 2017, Pages 59-73]
  • Multi-Walled Carbon Nanotube Effects of Nanotube/Matrix Interface on Multi-Walled Carbon Nanotube Reinforced Polymer Mechanical Properties [Volume 4, Issue 3, 2017, Pages 211-223]

N

  • Nanocomposite Distribution of Residual Stresses in Polymer Reinforced Carbon Nanotubes and Laminated Carbon Fibers [Volume 4, Issue 1, 2017, Pages 9-18]
  • Nanocomposite Synthesis and Characterization of Polymer/Nanosilicagel Nano-composites [Volume 4, Issue 1, 2017, Pages 1-8]
  • Nanocomposite Investigation into The Behavior of Nano-composite Tubes at Ballistic Impact [Volume 4, Issue 3, 2017, Pages 207-210]
  • Nanocomposite Effects of Nanotube/Matrix Interface on Multi-Walled Carbon Nanotube Reinforced Polymer Mechanical Properties [Volume 4, Issue 3, 2017, Pages 211-223]
  • Nano-manipulation Study of Laminated Composite MEMS and NEMS Performance in Nano Metric Operations [Volume 4, Issue 1, 2017, Pages 19-31]
  • Numerical Method A Numerical and Analytical Solution for the Free Vibration of Laminated Composites Using Different Plate Theories [Volume 4, Issue 1, 2017, Pages 75-87]

O

  • Open-Hole Specimens Open-Hole Size and Thermal Cycling Effects on Mass Loss and Surface Degradation of Polymer Matrix Composites [Volume 4, Issue 2, 2017, Pages 111-116]
  • Optimization Vibration Optimization of Fiber-Metal Laminated Composite Shallow Shell Panels Using an Adaptive PSO Algorithm [Volume 4, Issue 2, 2017, Pages 99-110]

P

  • Polymer Matrix Composites (PMCs) Open-Hole Size and Thermal Cycling Effects on Mass Loss and Surface Degradation of Polymer Matrix Composites [Volume 4, Issue 2, 2017, Pages 111-116]
  • Powder metallurgy Experimental Investigation of FGM Dental Implant Properties Made from Ti/HA Composite [Volume 4, Issue 3, 2017, Pages 233-237]

R

  • Rayleigh-Ritz Free Vibration Analysis of Size-Dependent, Functionally Graded, Rectangular Nano/Micro-plates based on Modified Nonlinear Couple Stress Shear Deformation Plate Theories [Volume 4, Issue 2, 2017, Pages 127-137]
  • Refined plate theory Free Vibration and Buckling Analyses of Functionally Graded Nanocomposite Plates Reinforced by Carbon Nanotube [Volume 4, Issue 1, 2017, Pages 59-73]
  • Residual stresses Distribution of Residual Stresses in Polymer Reinforced Carbon Nanotubes and Laminated Carbon Fibers [Volume 4, Issue 1, 2017, Pages 9-18]
  • Rheology Synthesis and Characterization of Polymer/Nanosilicagel Nano-composites [Volume 4, Issue 1, 2017, Pages 1-8]

S

  • Sandwich A Quasi-3D Polynomial Shear and Normal Deformation Theory for Laminated Composite, Sandwich, and Functionally Graded Beams [Volume 4, Issue 2, 2017, Pages 139-152]
  • Sandwich plate Mesh-free Dynamic Analyses of FGM Sandwich Plates Resting on A Pasternak Elastic Foundation [Volume 4, Issue 2, 2017, Pages 153-168]
  • Shallow Shell Vibration Optimization of Fiber-Metal Laminated Composite Shallow Shell Panels Using an Adaptive PSO Algorithm [Volume 4, Issue 2, 2017, Pages 99-110]
  • Shape memory alloy Compression Analysis of Hollow Cylinder Basalt Continuous Filament Epoxy Composite Filled with Shape Memory Wire [Volume 4, Issue 3, 2017, Pages 225-232]
  • Shear and normal deformation A Quasi-3D Polynomial Shear and Normal Deformation Theory for Laminated Composite, Sandwich, and Functionally Graded Beams [Volume 4, Issue 2, 2017, Pages 139-152]
  • Silica Synthesis and Characterization of Polymer/Nanosilicagel Nano-composites [Volume 4, Issue 1, 2017, Pages 1-8]
  • Smart plate On the Buckling the Behavior of a Multiphase Smart Plate based on a Higher-order Theory [Volume 4, Issue 1, 2017, Pages 47-58]
  • Sol-gel Synthesis and Characterization of Polymer/Nanosilicagel Nano-composites [Volume 4, Issue 1, 2017, Pages 1-8]
  • Spark plasma sintering (SPS) Experimental Investigation of FGM Dental Implant Properties Made from Ti/HA Composite [Volume 4, Issue 3, 2017, Pages 233-237]
  • Square Using the Taguchi Method for Experimental and Numerical Investigations on the Square-Cup Deep-Drawing Process for Aluminum/Steel Laminated Sheets [Volume 4, Issue 2, 2017, Pages 169-177]
  • Steel/composite joined tubes Dynamic Characteristics of Joined Steel and Carbon Fiber-Reinforced Plastic Tubes: Experimental and Numerical Investigation [Volume 4, Issue 2, 2017, Pages 88-97]
  • Surface Degradation Open-Hole Size and Thermal Cycling Effects on Mass Loss and Surface Degradation of Polymer Matrix Composites [Volume 4, Issue 2, 2017, Pages 111-116]

T

  • Taguchi Using the Taguchi Method for Experimental and Numerical Investigations on the Square-Cup Deep-Drawing Process for Aluminum/Steel Laminated Sheets [Volume 4, Issue 2, 2017, Pages 169-177]
  • Tensile properties A Study of the Effect of TPU and Clay Nanoparticles on the Mechanical Behavior of PBT-Based Nanocomposites [Volume 4, Issue 3, 2017, Pages 179-186]
  • Tensile properties Numerical Simulation of a Hybrid Nanocomposite Containing Ca-CO3 and Short Glass Fibers Subjected to Tensile Loading [Volume 4, Issue 2, 2017, Pages 117-125]
  • Ther-malCycling Open-Hole Size and Thermal Cycling Effects on Mass Loss and Surface Degradation of Polymer Matrix Composites [Volume 4, Issue 2, 2017, Pages 111-116]
  • Titanium/Hydroxyapatite Experimental Investigation of FGM Dental Implant Properties Made from Ti/HA Composite [Volume 4, Issue 3, 2017, Pages 233-237]

U

  • Unit cell Distribution of Residual Stresses in Polymer Reinforced Carbon Nanotubes and Laminated Carbon Fibers [Volume 4, Issue 1, 2017, Pages 9-18]

W

  • Wave propagation Mesh-free Dynamic Analyses of FGM Sandwich Plates Resting on A Pasternak Elastic Foundation [Volume 4, Issue 2, 2017, Pages 153-168]