Ansari, Reza Environmental Effects on Mechanical Properties of Glass/Epoxy and Fiber Metal Laminates, Part I: Hygrothermal Aging [Volume 4, Issue 3, 2017, Pages 187-196]
Ansari, Reza Environmental effects on mechanical properties of glass/epoxy and fiber metal laminates, Part II: Isothermal aging [Volume 4, Issue 3, 2017, Pages 197-205]
B
Baghbani, Ramin Mesh-free Dynamic Analyses of FGM Sandwich Plates Resting on A Pasternak Elastic Foundation [Volume 4, Issue 2, 2017, Pages 153-168]
C
Chalabi Tehran, Ata A Study of the Effect of TPU and Clay Nanoparticles on the Mechanical Behavior of PBT-Based Nanocomposites [Volume 4, Issue 3, 2017, Pages 179-186]
D
Daniali, M. Dynamic Characteristics of Joined Steel and Carbon Fiber-Reinforced Plastic Tubes: Experimental and Numerical Investigation [Volume 4, Issue 2, 2017, Pages 88-97]
Darvizeh, Abolfazl Environmental Effects on Mechanical Properties of Glass/Epoxy and Fiber Metal Laminates, Part I: Hygrothermal Aging [Volume 4, Issue 3, 2017, Pages 187-196]
Darvizeh, Abolfazl Environmental effects on mechanical properties of glass/epoxy and fiber metal laminates, Part II: Isothermal aging [Volume 4, Issue 3, 2017, Pages 197-205]
F
Fallah, Abolfazl Free Vibration Analysis of Size-Dependent, Functionally Graded, Rectangular Nano/Micro-plates based on Modified Nonlinear Couple Stress Shear Deformation Plate Theories [Volume 4, Issue 2, 2017, Pages 127-137]
Faraji Kalajahi, Pouya A Study of the Effect of TPU and Clay Nanoparticles on the Mechanical Behavior of PBT-Based Nanocomposites [Volume 4, Issue 3, 2017, Pages 179-186]
Fereidoon, Abdolhossein A Numerical and Analytical Solution for the Free Vibration of Laminated Composites Using Different Plate Theories [Volume 4, Issue 1, 2017, Pages 75-87]
G
Ghasemi, Ahmad Reza Distribution of Residual Stresses in Polymer Reinforced Carbon Nanotubes and Laminated Carbon Fibers [Volume 4, Issue 1, 2017, Pages 9-18]
Ghasemi, Ahmad Reza Open-Hole Size and Thermal Cycling Effects on Mass Loss and Surface Degradation of Polymer Matrix Composites [Volume 4, Issue 2, 2017, Pages 111-116]
Ghashochi-Bargh, Hadi Vibration Optimization of Fiber-Metal Laminated Composite Shallow Shell Panels Using an Adaptive PSO Algorithm [Volume 4, Issue 2, 2017, Pages 99-110]
Habibnejad Korayem, Moharram Study of Laminated Composite MEMS and NEMS Performance in Nano Metric Operations [Volume 4, Issue 1, 2017, Pages 19-31]
Homayooni, Ahmad Study of Laminated Composite MEMS and NEMS Performance in Nano Metric Operations [Volume 4, Issue 1, 2017, Pages 19-31]
H Soudmand, Behzad Numerical Simulation of a Hybrid Nanocomposite Containing Ca-CO3 and Short Glass Fibers Subjected to Tensile Loading [Volume 4, Issue 2, 2017, Pages 117-125]
J
Jabbari, Amirhossein Experimental Investigation of FGM Dental Implant Properties Made from Ti/HA Composite [Volume 4, Issue 3, 2017, Pages 233-237]
Jafarinezhad, Mohammad Reza Compression Analysis of Hollow Cylinder Basalt Continuous Filament Epoxy Composite Filled with Shape Memory Wire [Volume 4, Issue 3, 2017, Pages 225-232]
K
Khalili, Mohammad Reza Compression Analysis of Hollow Cylinder Basalt Continuous Filament Epoxy Composite Filled with Shape Memory Wire [Volume 4, Issue 3, 2017, Pages 225-232]
Khorshidi, Korosh Free Vibration Analysis of Size-Dependent, Functionally Graded, Rectangular Nano/Micro-plates based on Modified Nonlinear Couple Stress Shear Deformation Plate Theories [Volume 4, Issue 2, 2017, Pages 127-137]
Kouchakzadeh, M. A. Dynamic Characteristics of Joined Steel and Carbon Fiber-Reinforced Plastic Tubes: Experimental and Numerical Investigation [Volume 4, Issue 2, 2017, Pages 88-97]
L
Liaghat, Gholam Hossein Investigation into The Behavior of Nano-composite Tubes at Ballistic Impact [Volume 4, Issue 3, 2017, Pages 207-210]
Mahmoodi, Masoud Using the Taguchi Method for Experimental and Numerical Investigations on the Square-Cup Deep-Drawing Process for Aluminum/Steel Laminated Sheets [Volume 4, Issue 2, 2017, Pages 169-177]
Malek-Mohammadi, Hosein Free Vibration and Buckling Analyses of Functionally Graded Nanocomposite Plates Reinforced by Carbon Nanotube [Volume 4, Issue 1, 2017, Pages 59-73]
Mohammadi-Fesharaki, Mohammad Distribution of Residual Stresses in Polymer Reinforced Carbon Nanotubes and Laminated Carbon Fibers [Volume 4, Issue 1, 2017, Pages 9-18]
Momeni-Khabisi, Hamed Mesh-free Dynamic Analyses of FGM Sandwich Plates Resting on A Pasternak Elastic Foundation [Volume 4, Issue 2, 2017, Pages 153-168]
Moradi, Mahdi Open-Hole Size and Thermal Cycling Effects on Mass Loss and Surface Degradation of Polymer Matrix Composites [Volume 4, Issue 2, 2017, Pages 111-116]
Moradi-dastjerdi, Rasool Free Vibration and Buckling Analyses of Functionally Graded Nanocomposite Plates Reinforced by Carbon Nanotube [Volume 4, Issue 1, 2017, Pages 59-73]
Moradi-dastjerdi, Rasool Mesh-free Dynamic Analyses of FGM Sandwich Plates Resting on A Pasternak Elastic Foundation [Volume 4, Issue 2, 2017, Pages 153-168]
N
Najafi, Moslem Environmental Effects on Mechanical Properties of Glass/Epoxy and Fiber Metal Laminates, Part I: Hygrothermal Aging [Volume 4, Issue 3, 2017, Pages 187-196]
Najafi, Moslem Environmental effects on mechanical properties of glass/epoxy and fiber metal laminates, Part II: Isothermal aging [Volume 4, Issue 3, 2017, Pages 197-205]
Navazi, H. M. Dynamic Characteristics of Joined Steel and Carbon Fiber-Reinforced Plastic Tubes: Experimental and Numerical Investigation [Volume 4, Issue 2, 2017, Pages 88-97]
O
Olad, Ali A Study of the Effect of TPU and Clay Nanoparticles on the Mechanical Behavior of PBT-Based Nanocomposites [Volume 4, Issue 3, 2017, Pages 179-186]
Omidi, Narges Experimental Investigation of FGM Dental Implant Properties Made from Ti/HA Composite [Volume 4, Issue 3, 2017, Pages 233-237]
R
Rahimi, Gholam Hosein Investigation into The Behavior of Nano-composite Tubes at Ballistic Impact [Volume 4, Issue 3, 2017, Pages 207-210]
Rahimi Sharbaf, Hamed Investigation into The Behavior of Nano-composite Tubes at Ballistic Impact [Volume 4, Issue 3, 2017, Pages 207-210]
Razavi, Soheil On the Buckling the Behavior of a Multiphase Smart Plate based on a Higher-order Theory [Volume 4, Issue 1, 2017, Pages 47-58]
Rostamiyan, Yasser Improving Mechanical Properties of Nanocomposite-based Epoxy by High-impact Polystyrene and Multiwalled Carbon Nanotubes: Optimizing by a Mixture Design Approach [Volume 4, Issue 1, 2017, Pages 33-45]
S
Sadeghzadeh, Sadegh Study of Laminated Composite MEMS and NEMS Performance in Nano Metric Operations [Volume 4, Issue 1, 2017, Pages 19-31]
Sadr, Mohammad Homayoun Vibration Optimization of Fiber-Metal Laminated Composite Shallow Shell Panels Using an Adaptive PSO Algorithm [Volume 4, Issue 2, 2017, Pages 99-110]
Sayyad, Atteshamuddin S.A Quasi-3D Polynomial Shear and Normal Deformation Theory for Laminated Composite, Sandwich, and Functionally Graded Beams [Volume 4, Issue 2, 2017, Pages 139-152]
Sedighi, Mohammad Experimental Investigation of FGM Dental Implant Properties Made from Ti/HA Composite [Volume 4, Issue 3, 2017, Pages 233-237]
Shakooeea, F. Synthesis and Characterization of Polymer/Nanosilicagel Nano-composites [Volume 4, Issue 1, 2017, Pages 1-8]
Shakouri, M. Dynamic Characteristics of Joined Steel and Carbon Fiber-Reinforced Plastic Tubes: Experimental and Numerical Investigation [Volume 4, Issue 2, 2017, Pages 88-97]
Shelesh-Nezhad, Karim A Study of the Effect of TPU and Clay Nanoparticles on the Mechanical Behavior of PBT-Based Nanocomposites [Volume 4, Issue 3, 2017, Pages 179-186]
Shelesh-Nezhad, Karim Numerical Simulation of a Hybrid Nanocomposite Containing Ca-CO3 and Short Glass Fibers Subjected to Tensile Loading [Volume 4, Issue 2, 2017, Pages 117-125]
Shinde, Bharti M.A Quasi-3D Polynomial Shear and Normal Deformation Theory for Laminated Composite, Sandwich, and Functionally Graded Beams [Volume 4, Issue 2, 2017, Pages 139-152]
Shokrian, Minoo Dokht Numerical Simulation of a Hybrid Nanocomposite Containing Ca-CO3 and Short Glass Fibers Subjected to Tensile Loading [Volume 4, Issue 2, 2017, Pages 117-125]
Sohrabi, Habib Using the Taguchi Method for Experimental and Numerical Investigations on the Square-Cup Deep-Drawing Process for Aluminum/Steel Laminated Sheets [Volume 4, Issue 2, 2017, Pages 169-177]
T
Tajali, Mohammad Synthesis and Characterization of Polymer/Nanosilicagel Nano-composites [Volume 4, Issue 1, 2017, Pages 1-8]
Torabizadeh, Mohammad Amin A Numerical and Analytical Solution for the Free Vibration of Laminated Composites Using Different Plate Theories [Volume 4, Issue 1, 2017, Pages 75-87]
Y
Yousefpoar, Mardali Synthesis and Characterization of Polymer/Nanosilicagel Nano-composites [Volume 4, Issue 1, 2017, Pages 1-8]
