Mechanics of Advanced Composite Structures

Keywords = mechanical properties

Experimental Investigation of Residual Stress Measurement on Cold Roll Bonded Al/Cu Composite by Incremental Hole-Drilling Method

Volume 13, Issue 1, April 2026, Pages 1-11

10.22075/macs.2025.34303.1682

Amirmasood Rahimijonoush; Mohammad Honarpisheh; Amir Abdollahi; Mehdi Mohammadimehr

Optimal Replacement of Glass Fabric with Carbon Fabric in Epoxy Matrix Composite

Volume 12, Issue 3, November 2025, Pages 507-522

10.22075/macs.2024.33943.1667

Shivanku Chauhan; Aniket Ramnath Nagargoje; Murlidhar Patel; Aditya Roy

Effect of Microstructural Features and Al2O3 Doping on Aging Resistance, Mechanical Properties and Crack Propagation in 3Y-TZP Plate Ceramics for Dental Restorations: A Comprehensive Peridynamics Study

Volume 12, Issue 3, November 2025, Pages 523-554

10.22075/macs.2025.34610.1694

Alireza Moradkhani; Mohammad Hoseinpour Gollo; Valiollah Panahizadeh

Achieving High Strength in Fe-Based Metallic Glass Reinforced Aluminum Matrix Composites through Combined Ball Milling and Spark Plasma Sintering

Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, August 2025, Pages 435-446

10.22075/macs.2025.33187.1612

Mohammad Reza Rezaei; Reza Nazemnezhad; Erfan Khanmohammadi

Modeling and Numerical Prediction on Mechanical Behaviors of Hybrid Fiber Reinforced Polymer Bio Composites Using Fuzzy Logic Algorithm

Volume 12, Issue 1, April 2025, Pages 199-210

10.22075/macs.2024.33822.1648

Vinoth Viswanathan; Sathiyamurthy Subbarayan; Ananthi Narayanaswamy; Devi Panneerselvam; Prabhakaran Jayasankar

Microstructure & Mechanical Properties Evaluation of Al6082 /AlSi10Mg Composite for Light Weight Structural Applications

Volume 11, Issue 2, November 2024, Pages 309-320

10.22075/macs.2024.31464.1547

Burlakanti Subramanyam; Pitchaipillai Periyasamy

Polyester/Kota Stone Dust Composite: A Comprehensive Investigation of Mechanical and Sliding Wear Properties

Volume 11, Issue 2, November 2024, Pages 375-384

10.22075/macs.2024.31203.1537

Rakesh Singh; Vinay Chandra Jha

Short Literature Survey on Fiber-Reinforced Hybrid Composites

Volume 11, Issue 2, November 2024, Pages 425-452

10.22075/macs.2024.31934.1562

Manoj Kumar; Santosh Kumar

Analyzing and Improving Flexural and Impact Strength of Composites Enhanced with Nanoparticles and Natural Fibers

Volume 11, Issue 2, November 2024, Pages 467-482

10.22075/macs.2024.32607.1593

Hossein Taghipoor; Jaber Mirzaei

The Effect of Nano-B4C Additive on Microstructure and Mechanical Properties of Pressureless Sintering SiC Bodies

Volume 10, Issue 1, April 2023, Pages 29-42

10.22075/macs.2022.23941.1347

Behnam Salmany Kozekanan; Alireza Moradkhani; Hamidreza Baharvandi; Valiollah Panahizadeh

Effect of the Nature of Oxide Nanofillers on Changes in the Mechanical Properties of Epoxy Coatings under Thermal Cycling

Volume 10, Issue 1, April 2023, Pages 195-204

10.22075/macs.2022.26989.1399

Sergey Smirnov; Irina Veretennikova; Aleksandr Pestov; Dmitriy Konovalov; Evgeniy Smirnova; Victoriy Osipova

Physical and Mechanical Properties of Biodegradable Film from Taro Starch (Xanthosoma Sagittifolium) and Duck Bone Gelatin

Volume 9, Issue 2, November 2022, Pages 213-220

10.22075/macs.2022.25116.1366

T. A. Laksanawati; M. H. Khirzin; M. Amaniyah; S. Alfiyah; R. Iftitah

Material Mechanical Properties Prediction of Layer with Multidirectional Fiber Ply Reinforced Polymer Matrix Composites

Volume 9, Issue 2, November 2022, Pages 221-227

10.22075/macs.2022.22567.1324

Md Mehadi Hassan; Abu Bakar Siddique; Brandon Bohanon

An Experimental and Numerical Approach of Polymer Composites Based on Jute-Bamboo Natural Fiber

Volume 9, Issue 1, April 2022, Pages 105-113

10.22075/macs.2022.20908.1277

M. Rafiquzzaman; M. Zannat; M. T. Islam; M. R. Hossain

Artificial Intelligence Method for Predicting Mechanical Properties of Sand/Glass Reinforced Polymer: a New Model

Volume 8, Issue 2, November 2021, Pages 245-268

10.22075/macs.2020.20699.1268

Mahmood Heshmati; Sajad Hayati; Saeed Javanmiri; Mohammad Javadian

A Comparative Study on the Effect of HNT and Nano-Alumina Particles on the Mechanical Properties of Vacuum Bag Moulded Glass-Epoxy Nanocomposites

Volume 8, Issue 1, April 2021, Pages 119-131

10.22075/macs.2020.19870.1243

Ravichandran G; Rathnakar G; Santhosh N; Suresh R

Study of Bond Strength between Polymer-Modified Mortars/Concrete and Their Mechanical Properties using “Friction-Transfer” and “Pull-off” Methods

Volume 8, Issue 1, April 2021, Pages 171-184

10.22075/macs.2021.20231.1251

Ali Saberi Varzaneh; Mahmood Naderi

Molecular Dynamics Simulation of Functional and Hybrid Epoxy Based Nanocomposites

Volume 7, Issue 2, November 2020, Pages 233-243

10.22075/macs.2020.18878.1226

Ali Khodadadi; Mahmoud Haghighi; Hossein Golestanian; Farshid Aghadavoudi

Influence of Different Foaming Conditions on the Mechanical, Physical, and Structural Properties of Polypropylene Foam

Volume 6, Issue 2, November 2019, Pages 225-237

10.22075/macs.2019.15990.1160

Alireza Albooyeh; Shahin Eskandarzadeh; Arash Mousavi

Effects of reinforcement distribution on the mechanical properties of Al–Fe3O4 nanocomposites fabricated via accumulative roll bonding

Volume 5, Issue 2, November 2018, Pages 131-139

10.22075/macs.2018.12290.1121

Behrooz Pirouzi; Ehsan Borhani

Improving Mechanical Properties of Nanocomposite-based Epoxy by High-impact Polystyrene and Multiwalled Carbon Nanotubes: Optimizing by a Mixture Design Approach

Volume 4, Issue 1, April 2017, Pages 33-45

10.22075/macs.2017.1580.1076

Yasser Rostamiyan

The Effect of Processing Conditions on the Mechanical Properties of Polypropylene/Mesoporous Silica-Hydroxyapatite Hybrid Nanocomposites

Volume 3, Issue 2, November 2016, Pages 73-82

10.22075/macs.2016.469

A.R. Albooyeh; S. Tarahomi; A.B. Fereidoon; Z. Taherian

Mechanical Properties of CNT-Reinforced Polymer Nano-composites: A Molecular Dynamics Study

Volume 3, Issue 2, November 2016, Pages 113-121

10.22075/macs.2016.473

M. Farhadinia; B. Arab; J.E. Jam

On the Study of Mechanical Properties of Aluminum/Nano-Alumina Composites Produced via Powder Injection Molding

Volume 3, Issue 1, April 2016, Pages 45-51

10.22075/macs.2016.401

Hassan Abdoos; Hamid Khorsand; Ali-Akbar Yousefi

Investigation of Buckling Analysis of Epoxy/ Nanoclay/ Carbon Fiber Hybrid Laminated Nanocomposite: Using VARTM Technique for Preparation

Volume 3, Issue 1, April 2016, Pages 63-71

10.22075/macs.2016.435

Yasser Rostamiyan; Reza Emrahi

Mechanics of Advanced Composite Structures

Journal Archive

Volume 13 (2026)

Volume 12 (2025)

Volume 11 (2024)

Volume 10 (2023)

Volume 9 (2022)

Volume 8 (2021)

Volume 7 (2020)

Volume 6 (2019)

Volume 5 (2018)

Volume 4 (2017)

Volume 3 (2016)

Volume 2 (2015)

Volume 1 (2014)