Abdollahpour, Hasan Microwave-Assisted Two-Step Sintering of Al/8wt%TiC Composite Prepared by Powder Metallurgy [Volume 8, Issue 2, 2021, Pages 291-298]
Abdollahzadeh, Pouya On the Nonlinear Dynamics of an Energy Harvesting Device Based on Magnetostriction [Volume 8, Issue 1, 2021, Pages 33-40]
Abedini, Vahid Experimental Study on Surface Roughness and Cutting Force in Turning of Al7032 Reinforced with SiC Using Taguchi Design [Volume 8, Issue 1, 2021, Pages 69-76]
Adeniyi, Adedayo SheriffCharacterization of Thevetia Peruviana (Yellow Oleander) Shell Ash Powder as a Possible Filler in Polymer Composites [Volume 8, Issue 1, 2021, Pages 109-117]
Ahmadi, Hamed Experimental and Numerical Investigation on the Flexural Behavior of Composite-Reinforced Top-Hat Shape Beam [Volume 8, Issue 1, 2021, Pages 149-156]
Alihemmati, Jaber Frequency Analysis of Functionally Graded Carbon Nanotube-reinforced Cylindrical Panels by Mesh-free Galerkin Method [Volume 8, Issue 2, 2021, Pages 415-424]
Alikhani, Hossein Mechanical and Physical Properties of Glass-Fiber Reinforced Polymer Rods Manufactured by Different Pultrusion Methods [Volume 8, Issue 1, 2021, Pages 99-107]
Amiri, Ali RezaFinite Difference Analysis of 2D Stress Wave Propagation in Two Dimensional Functionally Graded Ceramics-Metals Composites [Volume 8, Issue 2, 2021, Pages 321-334]
Asemi, Kamran Numerical Investigation on Thermal Post-buckling Of Annular Sector Plates Made of FGM Via 3D Finite Element Method [Volume 8, Issue 2, 2021, Pages 309-320]
Ashok, R. BanagarExperimental and Finite Element Studies on Free Vibration of Areca Leaf Sheath Reinforced Polymer Composites [Volume 8, Issue 2, 2021, Pages 367-388]
Ashrafian, Roozbeh The Effect of Different Weighting Ratios, Length, and Thickness on Weighted Sum of the First Natural Frequency and Critical Buckling Load for a Laminated Composite Circular Cylindrical Shell [Volume 8, Issue 1, 2021, Pages 87-98]
Assadi, Abbass Size-dependent Vibration Analysis of Non-uniform Mass Sensor Nanobeams [Volume 8, Issue 2, 2021, Pages 235-244]
Azizi, Saber On the Nonlinear Dynamics of an Energy Harvesting Device Based on Magnetostriction [Volume 8, Issue 1, 2021, Pages 33-40]
B
Babaei, Masoud Numerical Investigation on Thermal Post-buckling Of Annular Sector Plates Made of FGM Via 3D Finite Element Method [Volume 8, Issue 2, 2021, Pages 309-320]
Basavaraju, B. Experimental and Finite Element Studies on Free Vibration of Areca Leaf Sheath Reinforced Polymer Composites [Volume 8, Issue 2, 2021, Pages 367-388]
D
Davar, Ali Free Vibration Analysis of Combined Cylindrical-Conical Composite Shells using First-Order Shear Deformation Theory [Volume 8, Issue 2, 2021, Pages 269-282]
Davar, Ali Buckling Analysis of Composite Grid-Stiffened Cylindrical Shells Using a Generalized Equivalent Single Layer Theory [Volume 8, Issue 2, 2021, Pages 455-466]
E
Ebrahami, F. Assessment of Hydrostatic Stress and Thermo Piezoelectricity in a Laminated Multilayered Rotating Hollow Cylinder [Volume 8, Issue 1, 2021, Pages 77-86]
Ebrahami, Farzad Vibration in an Electrically Affected Hygro-magneto-thermo-flexo Electric Nanobeam Embedded in Winkler-Pasternak Foundation [Volume 8, Issue 2, 2021, Pages 401-414]
Ebrahimi, Zohreh Microstructure, Mechanical and Electrical Properties of Copper Matrix Composites Reinforced with Steel Nanoparticles [Volume 8, Issue 2, 2021, Pages 335-345]
Eskandari Jam, Jafar Free Vibration Analysis of Combined Cylindrical-Conical Composite Shells using First-Order Shear Deformation Theory [Volume 8, Issue 2, 2021, Pages 269-282]
Eskandari Jam, Jafar Buckling Analysis of Composite Grid-Stiffened Cylindrical Shells Using a Generalized Equivalent Single Layer Theory [Volume 8, Issue 2, 2021, Pages 455-466]
Eskandari Shahraki, Majid Free Vibration Analysis of Combined Cylindrical-Conical Composite Shells using First-Order Shear Deformation Theory [Volume 8, Issue 2, 2021, Pages 269-282]
Eskandari Shahraki, Majid Buckling Analysis of Composite Grid-Stiffened Cylindrical Shells Using a Generalized Equivalent Single Layer Theory [Volume 8, Issue 2, 2021, Pages 455-466]
G
G, Rathnakar A Comparative Study on the Effect of HNT and Nano-Alumina Particles on the Mechanical Properties of Vacuum Bag Moulded Glass-Epoxy Nanocomposites [Volume 8, Issue 1, 2021, Pages 119-131]
G, Ravichandran A Comparative Study on the Effect of HNT and Nano-Alumina Particles on the Mechanical Properties of Vacuum Bag Moulded Glass-Epoxy Nanocomposites [Volume 8, Issue 1, 2021, Pages 119-131]
Ghannad, Mehdi Electro-Elastic Analysis of Finite Length FGPM Cylinders Subjected to Electromechanical Loading Using First-Order Electric Potential Theory [Volume 8, Issue 1, 2021, Pages 15-31]
Ghoddosian, Ali The Effect of Different Weighting Ratios, Length, and Thickness on Weighted Sum of the First Natural Frequency and Critical Buckling Load for a Laminated Composite Circular Cylindrical Shell [Volume 8, Issue 1, 2021, Pages 87-98]
Ghorai, Anjana Propagation Behavior of Love-Type Waves in a Poro-elastic Medium using Staggered Grid Finite Difference Scheme [Volume 8, Issue 2, 2021, Pages 359-365]
Golmakani, M.E. Buckling Analysis of Nano Composite Plates Based on Combination of the Incremental Load Technique and Dynamic Relaxation Method [Volume 8, Issue 1, 2021, Pages 133-148]
Goodarzi, Hamed Microwave-Assisted Two-Step Sintering of Al/8wt%TiC Composite Prepared by Powder Metallurgy [Volume 8, Issue 2, 2021, Pages 291-298]
Gururaj, Chandran A Review of Research Outcomes on Fabrication Methods and Investigations for Evaluating Fracture Behavior of Aluminum Metal Matrix Composites with its Applications [Volume 8, Issue 2, 2021, Pages 347-358]
H
Hayati, Sajad Artificial Intelligence Method for Predicting Mechanical Properties of Sand/Glass Reinforced Polymer: a New Model [Volume 8, Issue 2, 2021, Pages 245-268]
Hemmatian Soorki, Ali Experimental and Numerical Investigation of Reinforcement Sheet Effect on the Bending Strength of Corrugated Composite Panels [Volume 8, Issue 1, 2021, Pages 1-13]
Heshmati, Mahmood Artificial Intelligence Method for Predicting Mechanical Properties of Sand/Glass Reinforced Polymer: a New Model [Volume 8, Issue 2, 2021, Pages 245-268]
Heydari Beni, Mohsen Free Vibration Analysis of Combined Cylindrical-Conical Composite Shells using First-Order Shear Deformation Theory [Volume 8, Issue 2, 2021, Pages 269-282]
Heydari Beni, Mohsen Buckling Analysis of Composite Grid-Stiffened Cylindrical Shells Using a Generalized Equivalent Single Layer Theory [Volume 8, Issue 2, 2021, Pages 455-466]
Hoseini, Seyed Hamed On the Nonlinear Dynamics of an Energy Harvesting Device Based on Magnetostriction [Volume 8, Issue 1, 2021, Pages 33-40]
I
Ihueze, Christopher Chukwutoo The Graft of ANN-FEM Technique in Macro-mechanics of Multi-oriented Natural Fiber/Polyester Laminates [Volume 8, Issue 1, 2021, Pages 51-68]
J
Javadian, Mohammad Artificial Intelligence Method for Predicting Mechanical Properties of Sand/Glass Reinforced Polymer: a New Model [Volume 8, Issue 2, 2021, Pages 245-268]
Javanmiri, Saeed Artificial Intelligence Method for Predicting Mechanical Properties of Sand/Glass Reinforced Polymer: a New Model [Volume 8, Issue 2, 2021, Pages 245-268]
K
Kabiri Ataabadi, Abdulreza Experimental and Numerical Investigation of Reinforcement Sheet Effect on the Bending Strength of Corrugated Composite Panels [Volume 8, Issue 1, 2021, Pages 1-13]
Kadkhodayan, Mehran Application of Bi-Directional Functionally Graded Material Model for Free Vibration Analysis of Rotating Euler-Bernoulli Nanobeams [Volume 8, Issue 2, 2021, Pages 389-399]
Kami, Abdolvahed An Investigation on Three-Point Bending of Foam-Filled Double Tubes and Parameter Optimization Using Response Surface Methodology [Volume 8, Issue 1, 2021, Pages 41-50]
Khoramishad, Hadi Mechanical and Physical Properties of Glass-Fiber Reinforced Polymer Rods Manufactured by Different Pultrusion Methods [Volume 8, Issue 1, 2021, Pages 99-107]
Kiarasi, Faraz Numerical Investigation on Thermal Post-buckling Of Annular Sector Plates Made of FGM Via 3D Finite Element Method [Volume 8, Issue 2, 2021, Pages 309-320]
L
Lal, Achchhe XFEM for Fracture Analysis of Centrally Cracked Laminated Plates Subjected to Biaxial Loads [Volume 8, Issue 1, 2021, Pages 213-234]
Liaghat, Gholam Hossein Experimental and Numerical Investigation on the Flexural Behavior of Composite-Reinforced Top-Hat Shape Beam [Volume 8, Issue 1, 2021, Pages 149-156]
Loh-Mousavi, Mohsen Experimental and Numerical Investigation of Reinforcement Sheet Effect on the Bending Strength of Corrugated Composite Panels [Volume 8, Issue 1, 2021, Pages 1-13]
M
Mahesh, S. Assessment of Hydrostatic Stress and Thermo Piezoelectricity in a Laminated Multilayered Rotating Hollow Cylinder [Volume 8, Issue 1, 2021, Pages 77-86]
Mohammadi, Hassan Isogeometric Free and Forced Vibration Analyses of FG-CNTs Plates based on a Logarithmic Higher-Order Shear Deformation Theory [Volume 8, Issue 2, 2021, Pages 435-453]
Mohammad Panahiha, Hamid Buckling Analysis of Composite Grid-Stiffened Cylindrical Shells Using a Generalized Equivalent Single Layer Theory [Volume 8, Issue 2, 2021, Pages 455-466]
Momohjimoh, Ibrahim Characterization of Thevetia Peruviana (Yellow Oleander) Shell Ash Powder as a Possible Filler in Polymer Composites [Volume 8, Issue 1, 2021, Pages 109-117]
Mozaffari, A Low-velocity Impact Response of Viscoelastic Composite Laminates Considering Large Deflection and Higher-order Shear Deformation [Volume 8, Issue 2, 2021, Pages 425-434]
N
N, Santhosh A Comparative Study on the Effect of HNT and Nano-Alumina Particles on the Mechanical Properties of Vacuum Bag Moulded Glass-Epoxy Nanocomposites [Volume 8, Issue 1, 2021, Pages 119-131]
Naderi, Mahmood Study of Bond Strength between Polymer-Modified Mortars/Concrete and Their Mechanical Properties using “Friction-Transfer” and “Pull-off” Methods [Volume 8, Issue 1, 2021, Pages 171-184]
Naeinzadeh, Hadi Microstructure, Mechanical and Electrical Properties of Copper Matrix Composites Reinforced with Steel Nanoparticles [Volume 8, Issue 2, 2021, Pages 335-345]
Naik, Nitin S. Higher-order Displacement Model for Cylindrical Bending of Laminated and Sandwich Plates Subjected to Environmental Loads [Volume 8, Issue 1, 2021, Pages 185-201]
Nazemizadeh, mostafa Size-dependent Vibration Analysis of Non-uniform Mass Sensor Nanobeams [Volume 8, Issue 2, 2021, Pages 235-244]
Nejati, Mohammad Frequency Analysis of Functionally Graded Carbon Nanotube-reinforced Cylindrical Panels by Mesh-free Galerkin Method [Volume 8, Issue 2, 2021, Pages 415-424]
Norouzifard, Vahid Microstructure, Mechanical and Electrical Properties of Copper Matrix Composites Reinforced with Steel Nanoparticles [Volume 8, Issue 2, 2021, Pages 335-345]
O
Ohab-Yazdi, Sayed Mohammad Kazem Application of Bi-Directional Functionally Graded Material Model for Free Vibration Analysis of Rotating Euler-Bernoulli Nanobeams [Volume 8, Issue 2, 2021, Pages 389-399]
Okafor, Christian Emeka The Graft of ANN-FEM Technique in Macro-mechanics of Multi-oriented Natural Fiber/Polyester Laminates [Volume 8, Issue 1, 2021, Pages 51-68]
P
Pal, Jayantika Propagation Behavior of Love-Type Waves in a Poro-elastic Medium using Staggered Grid Finite Difference Scheme [Volume 8, Issue 2, 2021, Pages 359-365]
Palekar, Shailesh P.XFEM for Fracture Analysis of Centrally Cracked Laminated Plates Subjected to Biaxial Loads [Volume 8, Issue 1, 2021, Pages 213-234]
Parhizkar Yaghoobi, Mohammad Electro-Elastic Analysis of Finite Length FGPM Cylinders Subjected to Electromechanical Loading Using First-Order Electric Potential Theory [Volume 8, Issue 1, 2021, Pages 15-31]
Pitchipoo, Pandian A Review of Research Outcomes on Fabrication Methods and Investigations for Evaluating Fracture Behavior of Aluminum Metal Matrix Composites with its Applications [Volume 8, Issue 2, 2021, Pages 347-358]
Pradhan, N. Nonlinear Bending Behavior of Functionally Graded Plates Combined with Active Fiber Composites under Thermal Environment [Volume 8, Issue 2, 2021, Pages 299-308]
R
R, Suresh A Comparative Study on the Effect of HNT and Nano-Alumina Particles on the Mechanical Properties of Vacuum Bag Moulded Glass-Epoxy Nanocomposites [Volume 8, Issue 1, 2021, Pages 119-131]
Rahmani, Hossein Finite Difference Analysis of 2D Stress Wave Propagation in Two Dimensional Functionally Graded Ceramics-Metals Composites [Volume 8, Issue 2, 2021, Pages 321-334]
Rajab, Manal zThe Effect of the Solvents on Electrical Properties of POT Conducting Polymer [Volume 8, Issue 2, 2021, Pages 283-289]
Rajakarunakaran, Sivaprakasam A Review of Research Outcomes on Fabrication Methods and Investigations for Evaluating Fracture Behavior of Aluminum Metal Matrix Composites with its Applications [Volume 8, Issue 2, 2021, Pages 347-358]
Rexy, J Vibration in an Electrically Affected Hygro-magneto-thermo-flexo Electric Nanobeam Embedded in Winkler-Pasternak Foundation [Volume 8, Issue 2, 2021, Pages 401-414]
Rezvan Rostami, Reza Experimental Study on Surface Roughness and Cutting Force in Turning of Al7032 Reinforced with SiC Using Taguchi Design [Volume 8, Issue 1, 2021, Pages 69-76]
S
Saberi Varzaneh, Ali Study of Bond Strength between Polymer-Modified Mortars/Concrete and Their Mechanical Properties using “Friction-Transfer” and “Pull-off” Methods [Volume 8, Issue 1, 2021, Pages 171-184]
Saffari, Hadi Size-dependent Vibration Analysis of Non-uniform Mass Sensor Nanobeams [Volume 8, Issue 2, 2021, Pages 235-244]
Sarangi, Saroj KumarNonlinear Bending Behavior of Functionally Graded Plates Combined with Active Fiber Composites under Thermal Environment [Volume 8, Issue 2, 2021, Pages 299-308]
Sayyad, Atteshamuddin S.Higher-order Displacement Model for Cylindrical Bending of Laminated and Sandwich Plates Subjected to Environmental Loads [Volume 8, Issue 1, 2021, Pages 185-201]
Selvamani, R. Assessment of Hydrostatic Stress and Thermo Piezoelectricity in a Laminated Multilayered Rotating Hollow Cylinder [Volume 8, Issue 1, 2021, Pages 77-86]
Selvamani, Rajendran Vibration in an Electrically Affected Hygro-magneto-thermo-flexo Electric Nanobeam Embedded in Winkler-Pasternak Foundation [Volume 8, Issue 2, 2021, Pages 401-414]
Shahbazi Karami, Javad An Investigation on Three-Point Bending of Foam-Filled Double Tubes and Parameter Optimization Using Response Surface Methodology [Volume 8, Issue 1, 2021, Pages 41-50]
Shahsavari, Milad Numerical Investigation on Thermal Post-buckling Of Annular Sector Plates Made of FGM Via 3D Finite Element Method [Volume 8, Issue 2, 2021, Pages 309-320]
Sharifzadeh, Fatemeh Mechanical and Physical Properties of Glass-Fiber Reinforced Polymer Rods Manufactured by Different Pultrusion Methods [Volume 8, Issue 1, 2021, Pages 99-107]
Sheikhi Azqandi, Mojtaba A Novel Hybrid Genetic Modified Colliding Bodies Optimization for Designing of Composite Laminates [Volume 8, Issue 1, 2021, Pages 203-212]
Shokrgozar, Mohammadreza Low-velocity Impact Response of Viscoelastic Composite Laminates Considering Large Deflection and Higher-order Shear Deformation [Volume 8, Issue 2, 2021, Pages 425-434]
Siahpush, Ali Size-dependent Electro-Mechanical Vibration Analysis of FGPM Composite Plates using Modified Shear Deformation Theories [Volume 8, Issue 1, 2021, Pages 157-169]
Sobhani, Manoochehr Microwave-Assisted Two-Step Sintering of Al/8wt%TiC Composite Prepared by Powder Metallurgy [Volume 8, Issue 2, 2021, Pages 291-298]
Soltanimaleki, Arman Frequency Analysis of Functionally Graded Carbon Nanotube-reinforced Cylindrical Panels by Mesh-free Galerkin Method [Volume 8, Issue 2, 2021, Pages 415-424]
Soroush, Majid Free Vibration Analysis of Combined Cylindrical-Conical Composite Shells using First-Order Shear Deformation Theory [Volume 8, Issue 2, 2021, Pages 269-282]
Srinivasa, Chikkol V.Experimental and Finite Element Studies on Free Vibration of Areca Leaf Sheath Reinforced Polymer Composites [Volume 8, Issue 2, 2021, Pages 367-388]
T
Tadi Beni, Yaghub Frequency Analysis of Functionally Graded Carbon Nanotube-reinforced Cylindrical Panels by Mesh-free Galerkin Method [Volume 8, Issue 2, 2021, Pages 415-424]
Taheri, Moein Size-dependent Vibration Analysis of Non-uniform Mass Sensor Nanobeams [Volume 8, Issue 2, 2021, Pages 235-244]
Talebi, Amir Microstructure, Mechanical and Electrical Properties of Copper Matrix Composites Reinforced with Steel Nanoparticles [Volume 8, Issue 2, 2021, Pages 335-345]
Tizfahm, Akbar Low-velocity Impact Response of Viscoelastic Composite Laminates Considering Large Deflection and Higher-order Shear Deformation [Volume 8, Issue 2, 2021, Pages 425-434]
U
Usman, Mohammed Characterization of Thevetia Peruviana (Yellow Oleander) Shell Ash Powder as a Possible Filler in Polymer Composites [Volume 8, Issue 1, 2021, Pages 109-117]
Z
Zahedan, Nima Experimental and Numerical Investigation on the Flexural Behavior of Composite-Reinforced Top-Hat Shape Beam [Volume 8, Issue 1, 2021, Pages 149-156]
Zeighami, Vahid Buckling Analysis of Nano Composite Plates Based on Combination of the Incremental Load Technique and Dynamic Relaxation Method [Volume 8, Issue 1, 2021, Pages 133-148]
Ziadan, K. M. The Effect of the Solvents on Electrical Properties of POT Conducting Polymer [Volume 8, Issue 2, 2021, Pages 283-289]
