Abdi, Hamid Parametric Investigation of Particle Movements in Ultrasonic Levitation Process Using Piezoelectric Materials [Volume 13, Issue 2, 2026, Pages 357-369]
Abdollahi, Amir Experimental Investigation of Residual Stress Measurement on Cold Roll Bonded Al/Cu Composite by Incremental Hole-Drilling Method [Volume 13, Issue 1, 2026, Pages 1-11]
Abdullah, Orhan Sabah Investigation of Mechanical Properties for Blend Epoxy-Polysulfide Reinforced with Woven Carbon and Glass Fiber [Volume 13, Issue 1, 2026, Pages 185-195]
Achyuth, Penda Enhancement of Mechanical Properties of Coir, Kapok, and Hemp Fiber-Reinforced Epoxy Composites for a Variety of Applications [Volume 13, Issue 2, 2026, Pages 271-281]
Afshin, Shadi Study on Thermal, Mechanical and Dynamic Properties of Epoxy Matrix with Hybrid of Nanoclay/Carbon Nanotube [Volume 13, Issue 1, 2026, Pages 37-56]
Ahlawat, Neha Vibration Analysis of FGM Annular Plate with Linearly Varying Thickness for Several Boundary Conditions [Volume 13, Issue 2, 2026, Pages 475-494]
Alamdari, Sanaz Nanocomposite Thin Film of KTP Nanoparticles: Synthesis, Characterization and Optical Applications [Volume 13, Issue 2, 2026, Pages 465-473]
Ammouchi, Nesrine Development of a Composite Material Based on a Polymer and Plant Fibers [Volume 13, Issue 2, 2026, Pages 391-399]
Amoochi, Abbas Parametric Investigation of Particle Movements in Ultrasonic Levitation Process Using Piezoelectric Materials [Volume 13, Issue 2, 2026, Pages 357-369]
Arani, Rajendra Prasad Mechanical Testing of Novel and Conventional Geopolymer Brick Dried under Passive Solar Dryer with Ferric Chloride Dihydrate as Phase Change Material [Volume 13, Issue 1, 2026, Pages 23-35]
Aswalekar, Uday Mechanical and Tribological Characterization of Eco-Friendly Brake Pads Using Banana Peel Powder as a Sustainable Friction Material [Volume 13, Issue 2, 2026, Pages 427-437]
Auradi, Virupaxi Reinforcement Surface Modification Effect on the Microstructure, Mechanical, and Tensile Fractography of Al2219 Alloy B4C Composites [Volume 13, Issue 1, 2026, Pages 197-210]
B
Bafandeh Haghighi, Shadan Experimental Analysis of the Effect of Mechanical Topology on the Surface of Biological Microgripper Made of Ionic-Polymer Metal Composite Smart Material [Volume 13, Issue 1, 2026, Pages 143-156]
Bangalore Chandrashekar, Nidhi Performance Evaluation of Epoxy-Based Natural Composites Reinforced with Flax and Flax-Ramie Fiber [Volume 13, Issue 1, 2026, Pages 13-22]
Bellili, Nadira Development of a Composite Material Based on a Polymer and Plant Fibers [Volume 13, Issue 2, 2026, Pages 391-399]
Boulkesrane, Chems El Douha Development of a Composite Material Based on a Polymer and Plant Fibers [Volume 13, Issue 2, 2026, Pages 391-399]
C
Chandrashekar, Rajarathnam Effect of Nickel Addition on the Coefficient of Thermal Expansion and Microstructural Characteristics of AA2024 and AA7175 Aluminum Alloys in As-Cast and Homogenized States [Volume 13, Issue 1, 2026, Pages 97-116]
Charerntanom, Wissanu Characterization of Physical and Mechanical Properties, and Morphology of Wood Composites Derived from Milk Bottles and Teak Sawdust Powder [Volume 13, Issue 2, 2026, Pages 259-269]
Chumsamrong, Pranee Biodegradation, Mechanical and Physical Properties of Poly(butylene succinate) and Natural Rubber Compound Blend Filled with Activated Carbon from Coconut Fruit [Volume 13, Issue 1, 2026, Pages 157-169]
Cinquemani, Simone Parametric Investigation of Particle Movements in Ultrasonic Levitation Process Using Piezoelectric Materials [Volume 13, Issue 2, 2026, Pages 357-369]
D
Dairi, Badrina Development of a Composite Material Based on a Polymer and Plant Fibers [Volume 13, Issue 2, 2026, Pages 391-399]
Dairi, Nassima Development of a Composite Material Based on a Polymer and Plant Fibers [Volume 13, Issue 2, 2026, Pages 391-399]
Fereidoon, Abdolhosein Applying an Artificial Neural Network to Predict the Mechanical Properties of Epoxy Resin with Graphite Additive After Water Absorption [Volume 13, Issue 1, 2026, Pages 245-257]
G
Ganiger, Subhashchandra Reinforcement Surface Modification Effect on the Microstructure, Mechanical, and Tensile Fractography of Al2219 Alloy B4C Composites [Volume 13, Issue 1, 2026, Pages 197-210]
Gharibshahian, Elaheh Nanocomposite Thin Film of KTP Nanoparticles: Synthesis, Characterization and Optical Applications [Volume 13, Issue 2, 2026, Pages 465-473]
Ghasemi, Ahmad Reza Statistical Analysis of Delamination Effect on Natural Frequency of Composite Laminated Plate [Volume 13, Issue 1, 2026, Pages 129-142]
Ghasemi, Mohammad Improving Prediction of Compressive Strength of Rectangular/Square (R/S) FRP-Confined Concrete Using Machine Learning [Volume 13, Issue 2, 2026, Pages 283-304]
Ghasemi Ghalebahman, Ahmad Evaluation of the Effect of polyethylene/SMR20 Hybrid Nanocomposites Reinforced with Basalt Fibers and Graphene using RSM [Volume 13, Issue 2, 2026, Pages 401-414]
Ghorbani, Saeed Enhancing Mechanical Properties of Polypropylene Composites Reinforced with Date Palm Fiber Using Maleic Anhydride Grafted Polypropylene as a Compatibilizer [Volume 13, Issue 1, 2026, Pages 211-226]
Govindan Radhakrishnan, Gopinath Mechanical Testing of Novel and Conventional Geopolymer Brick Dried under Passive Solar Dryer with Ferric Chloride Dihydrate as Phase Change Material [Volume 13, Issue 1, 2026, Pages 23-35]
Govindhan Radhakrishnan, Rajesh Kanna Mechanical Testing of Novel and Conventional Geopolymer Brick Dried under Passive Solar Dryer with Ferric Chloride Dihydrate as Phase Change Material [Volume 13, Issue 1, 2026, Pages 23-35]
Gupta, Sneha Strength Behavior of Soft Soil Treated with Municipal Solid Waste Incineration Ash and Nano Zeolite [Volume 13, Issue 2, 2026, Pages 305-317]
H
Hamza, Waleed Hamed Investigation of Mechanical Properties for Blend Epoxy-Polysulfide Reinforced with Woven Carbon and Glass Fiber [Volume 13, Issue 1, 2026, Pages 185-195]
Heydari, Mahmoud Influence of Hydroxyl-Terminated Polybutadiene (HTPB) on the Mechanical and Electrical Properties of Epoxy Phenol Novolac Resin [Volume 13, Issue 2, 2026, Pages 381-390]
Honarpisheh, Mohammad Experimental Investigation of Residual Stress Measurement on Cold Roll Bonded Al/Cu Composite by Incremental Hole-Drilling Method [Volume 13, Issue 1, 2026, Pages 1-11]
Hoseinpour Gollo, Mohammad Investigating the Effective Factors for Enhancing the Optimization of Al6061/8Al2O3-3WC-8SiC Composite Using the Friction Stir Process [Volume 13, Issue 2, 2026, Pages 371-379]
J
Jabbari, Ali Parametric Investigation of Particle Movements in Ultrasonic Levitation Process Using Piezoelectric Materials [Volume 13, Issue 2, 2026, Pages 357-369]
Jafar Tafreshi, Majid Nanocomposite Thin Film of KTP Nanoparticles: Synthesis, Characterization and Optical Applications [Volume 13, Issue 2, 2026, Pages 465-473]
Jeevan, Ashok Kumar Jeevan Mechanical Testing of Novel and Conventional Geopolymer Brick Dried under Passive Solar Dryer with Ferric Chloride Dihydrate as Phase Change Material [Volume 13, Issue 1, 2026, Pages 23-35]
Jena, Hemalata Dielectric and Thermal Behaviour Analysis of Epoxy Composites Filled with Date Seed Particles Using Finite Element Method [Volume 13, Issue 2, 2026, Pages 347-355]
John, Jerold John Britto Influence of Process Parameters on the Mechanical Properties of Carbon Fibre Reinforced PETG [Volume 13, Issue 1, 2026, Pages 171-184]
K
Karagaiah, Naveen Kumar Bannuru Reinforcement Surface Modification Effect on the Microstructure, Mechanical, and Tensile Fractography of Al2219 Alloy B4C Composites [Volume 13, Issue 1, 2026, Pages 197-210]
Khirkhahan, Saeed Nanocomposite Thin Film of KTP Nanoparticles: Synthesis, Characterization and Optical Applications [Volume 13, Issue 2, 2026, Pages 465-473]
Kukanur, Vijayendra Reinforcement Surface Modification Effect on the Microstructure, Mechanical, and Tensile Fractography of Al2219 Alloy B4C Composites [Volume 13, Issue 1, 2026, Pages 197-210]
Kumar, Anil Modeling and Experimental Validation of Carbon Fiber-Kevlar Honeycomb Core Sandwich Structure [Volume 13, Issue 1, 2026, Pages 69-82]
Kumar, Halkur Siddagangaiah Reinforcement Surface Modification Effect on the Microstructure, Mechanical, and Tensile Fractography of Al2219 Alloy B4C Composites [Volume 13, Issue 1, 2026, Pages 197-210]
Kumar, Saurabh Strength Behavior of Soft Soil Treated with Municipal Solid Waste Incineration Ash and Nano Zeolite [Volume 13, Issue 2, 2026, Pages 305-317]
Kumar, Sekaran Sathees Enhancement of Mechanical Properties of Coir, Kapok, and Hemp Fiber-Reinforced Epoxy Composites for a Variety of Applications [Volume 13, Issue 2, 2026, Pages 271-281]
Kumaraswamy, Jayappa Microstructure Study and Optimization of Hardness and Tensile Strength of AW2024/B4Cp Reinforced Composites Through Linear Regression [Volume 13, Issue 1, 2026, Pages 83-96]
L
Lakshminarayana, Bharath Microstructure Study and Optimization of Hardness and Tensile Strength of AW2024/B4Cp Reinforced Composites Through Linear Regression [Volume 13, Issue 1, 2026, Pages 83-96]
Lashgari, Hossein Investigating the Effective Factors for Enhancing the Optimization of Al6061/8Al2O3-3WC-8SiC Composite Using the Friction Stir Process [Volume 13, Issue 2, 2026, Pages 371-379]
Lokantara, I Putu Optimizing Mahogany Peel Powder-Polyester Composites for Sustainable Automotive Interior Panels: Effects of Filler Content on Mechanical and Thermal Properties [Volume 13, Issue 2, 2026, Pages 439-450]
M
Madeva, Nagaral Effect of Nickel Addition on the Coefficient of Thermal Expansion and Microstructural Characteristics of AA2024 and AA7175 Aluminum Alloys in As-Cast and Homogenized States [Volume 13, Issue 1, 2026, Pages 97-116]
Mahmood, Ibtihal Abdulrazak Investigation of Mechanical Properties for Blend Epoxy-Polysulfide Reinforced with Woven Carbon and Glass Fiber [Volume 13, Issue 1, 2026, Pages 185-195]
Malgol, Amit Mechanical and Tribological Characterization of Eco-Friendly Brake Pads Using Banana Peel Powder as a Sustainable Friction Material [Volume 13, Issue 2, 2026, Pages 427-437]
Mallik, Sadek Hossain State Space Approach to Moore-Gibson-Thompson Generalized Piezo-Thermoelasticity with Memory-Dependent Derivative [Volume 13, Issue 2, 2026, Pages 451-463]
Mazdak, Siamak Parametric Investigation of Particle Movements in Ultrasonic Levitation Process Using Piezoelectric Materials [Volume 13, Issue 2, 2026, Pages 357-369]
Mohammadimehr, Mehdi Experimental Investigation of Residual Stress Measurement on Cold Roll Bonded Al/Cu Composite by Incremental Hole-Drilling Method [Volume 13, Issue 1, 2026, Pages 1-11]
Mohanraju Raju, Sundarraju Effect of Nickel Addition on the Coefficient of Thermal Expansion and Microstructural Characteristics of AA2024 and AA7175 Aluminum Alloys in As-Cast and Homogenized States [Volume 13, Issue 1, 2026, Pages 97-116]
Molla, Mohammad Abul Kashim State Space Approach to Moore-Gibson-Thompson Generalized Piezo-Thermoelasticity with Memory-Dependent Derivative [Volume 13, Issue 2, 2026, Pages 451-463]
Momeni, Amir Investigating the Effective Factors for Enhancing the Optimization of Al6061/8Al2O3-3WC-8SiC Composite Using the Friction Stir Process [Volume 13, Issue 2, 2026, Pages 371-379]
Mondal, Nasiruddin State Space Approach to Moore-Gibson-Thompson Generalized Piezo-Thermoelasticity with Memory-Dependent Derivative [Volume 13, Issue 2, 2026, Pages 451-463]
Moodi, Yaser Improving Prediction of Compressive Strength of Rectangular/Square (R/S) FRP-Confined Concrete Using Machine Learning [Volume 13, Issue 2, 2026, Pages 283-304]
Mousavi, Seyed Rohollah Improving Prediction of Compressive Strength of Rectangular/Square (R/S) FRP-Confined Concrete Using Machine Learning [Volume 13, Issue 2, 2026, Pages 283-304]
N
Nagaral, Madeva Reinforcement Surface Modification Effect on the Microstructure, Mechanical, and Tensile Fractography of Al2219 Alloy B4C Composites [Volume 13, Issue 1, 2026, Pages 197-210]
Nalband, Fazil Reinforcement Surface Modification Effect on the Microstructure, Mechanical, and Tensile Fractography of Al2219 Alloy B4C Composites [Volume 13, Issue 1, 2026, Pages 197-210]
Namdev, Nagaraj Reinforcement Surface Modification Effect on the Microstructure, Mechanical, and Tensile Fractography of Al2219 Alloy B4C Composites [Volume 13, Issue 1, 2026, Pages 197-210]
Nasrollah, Amin Experimental Analysis of the Effect of Mechanical Topology on the Surface of Biological Microgripper Made of Ionic-Polymer Metal Composite Smart Material [Volume 13, Issue 1, 2026, Pages 143-156]
Nguyen, Van-Chinh A Finite Element Formulation for Analyzing the Nonlinear Static Response of Bi-functionally Graded Microbeam Resting on Elastic Foundation Under Various Loads [Volume 13, Issue 1, 2026, Pages 227-243]
Nouri Damghani, Mohammad Enhancing Mechanical Properties of Polypropylene Composites Reinforced with Date Palm Fiber Using Maleic Anhydride Grafted Polypropylene as a Compatibilizer [Volume 13, Issue 1, 2026, Pages 211-226]
Nouri Niyaraki, Ebrahim Evaluation of the Effect of polyethylene/SMR20 Hybrid Nanocomposites Reinforced with Basalt Fibers and Graphene using RSM [Volume 13, Issue 2, 2026, Pages 401-414]
Noyming, Sombut Biodegradation, Mechanical and Physical Properties of Poly(butylene succinate) and Natural Rubber Compound Blend Filled with Activated Carbon from Coconut Fruit [Volume 13, Issue 1, 2026, Pages 157-169]
Nuilek, Kanokon Characterization of Physical and Mechanical Properties, and Morphology of Wood Composites Derived from Milk Bottles and Teak Sawdust Powder [Volume 13, Issue 2, 2026, Pages 259-269]
O
Ouaoua, Lokmane Development of a Composite Material Based on a Polymer and Plant Fibers [Volume 13, Issue 2, 2026, Pages 391-399]
P
Pahlavani Bidgoli, Komeil Influence of Hydroxyl-Terminated Polybutadiene (HTPB) on the Mechanical and Electrical Properties of Epoxy Phenol Novolac Resin [Volume 13, Issue 2, 2026, Pages 381-390]
Pandian, Pitchipoo Influence of Process Parameters on the Mechanical Properties of Carbon Fibre Reinforced PETG [Volume 13, Issue 1, 2026, Pages 171-184]
Parvizi, Soroush Investigating the Effective Factors for Enhancing the Optimization of Al6061/8Al2O3-3WC-8SiC Composite Using the Friction Stir Process [Volume 13, Issue 2, 2026, Pages 371-379]
Pati, Pravat Ranjan Enhancement of Mechanical Properties of Coir, Kapok, and Hemp Fiber-Reinforced Epoxy Composites for a Variety of Applications [Volume 13, Issue 2, 2026, Pages 271-281]
Porwal, Rajesh Kumar Mechanical and Physical Properties Observations for Cu-Gr-SiC Composite Synthesized by Powder Metallurgy [Volume 13, Issue 2, 2026, Pages 339-345]
Pradhan, Priyabrat Dielectric and Thermal Behaviour Analysis of Epoxy Composites Filled with Date Seed Particles Using Finite Element Method [Volume 13, Issue 2, 2026, Pages 347-355]
Prasoetsopha, Natkrita Biodegradation, Mechanical and Physical Properties of Poly(butylene succinate) and Natural Rubber Compound Blend Filled with Activated Carbon from Coconut Fruit [Volume 13, Issue 1, 2026, Pages 157-169]
Prasoetsopha, Natkrita Characterization of Physical and Mechanical Properties, and Morphology of Wood Composites Derived from Milk Bottles and Teak Sawdust Powder [Volume 13, Issue 2, 2026, Pages 259-269]
Purohit, Abhilash Dielectric and Thermal Behaviour Analysis of Epoxy Composites Filled with Date Seed Particles Using Finite Element Method [Volume 13, Issue 2, 2026, Pages 347-355]
R
Raghav, Sapna Modeling and Experimental Validation of Carbon Fiber-Kevlar Honeycomb Core Sandwich Structure [Volume 13, Issue 1, 2026, Pages 69-82]
Rahimijonoush, Amirmasood Experimental Investigation of Residual Stress Measurement on Cold Roll Bonded Al/Cu Composite by Incremental Hole-Drilling Method [Volume 13, Issue 1, 2026, Pages 1-11]
Rahmanpour, Muhammadreza Evaluation of the Effect of polyethylene/SMR20 Hybrid Nanocomposites Reinforced with Basalt Fibers and Graphene using RSM [Volume 13, Issue 2, 2026, Pages 401-414]
Rajabi Delivand, Mohammad Hasan Investigating the Effective Factors for Enhancing the Optimization of Al6061/8Al2O3-3WC-8SiC Composite Using the Friction Stir Process [Volume 13, Issue 2, 2026, Pages 371-379]
Raja Murugan, Thavidan Vellaiyan Prediction and Parametric Effect in Drilling of Natural Fiber Laminate Using Combined Taguchi- Artificial Neural Network Approach [Volume 13, Issue 2, 2026, Pages 415-426]
Rajendra, Pagadaddinni Effect of Nickel Addition on the Coefficient of Thermal Expansion and Microstructural Characteristics of AA2024 and AA7175 Aluminum Alloys in As-Cast and Homogenized States [Volume 13, Issue 1, 2026, Pages 97-116]
Ramachandran, Prabhakaran Influence of Process Parameters on the Mechanical Properties of Carbon Fibre Reinforced PETG [Volume 13, Issue 1, 2026, Pages 171-184]
Ramamoorthi, Venkatesh Influence of Process Parameters on the Mechanical Properties of Carbon Fibre Reinforced PETG [Volume 13, Issue 1, 2026, Pages 171-184]
Ramesha, Channegowdana Doddy Madegowda Effect of Nickel Addition on the Coefficient of Thermal Expansion and Microstructural Characteristics of AA2024 and AA7175 Aluminum Alloys in As-Cast and Homogenized States [Volume 13, Issue 1, 2026, Pages 97-116]
Ranjitharamasamy, Sudhakara Pandian Mechanical Testing of Novel and Conventional Geopolymer Brick Dried under Passive Solar Dryer with Ferric Chloride Dihydrate as Phase Change Material [Volume 13, Issue 1, 2026, Pages 23-35]
Reddy, Matta Vishnu Jagadiswar Enhancement of Mechanical Properties of Coir, Kapok, and Hemp Fiber-Reinforced Epoxy Composites for a Variety of Applications [Volume 13, Issue 2, 2026, Pages 271-281]
S
Sadeghian, Mostafa Large Deflection Analysis of Graphene Sheets in the Thermal Environment Using Higher-Order Nonlocal Strain Gradient Principle [Volume 13, Issue 1, 2026, Pages 117-128]
Sahi, Samira Elaboration and Characterization of Waste Inked Paper-Poly (Vinyl Chloride) Composites: Effect of Paper Deinking [Volume 13, Issue 1, 2026, Pages 57-68]
Sahoo, Bibhuti BhusanDielectric and Thermal Behaviour Analysis of Epoxy Composites Filled with Date Seed Particles Using Finite Element Method [Volume 13, Issue 2, 2026, Pages 347-355]
Sai, Katuri Karthik Venkat Enhancement of Mechanical Properties of Coir, Kapok, and Hemp Fiber-Reinforced Epoxy Composites for a Variety of Applications [Volume 13, Issue 2, 2026, Pages 271-281]
Sakri, Mahadev Reinforcement Surface Modification Effect on the Microstructure, Mechanical, and Tensile Fractography of Al2219 Alloy B4C Composites [Volume 13, Issue 1, 2026, Pages 197-210]
Samanta, Lokanatha DhallDielectric and Thermal Behaviour Analysis of Epoxy Composites Filled with Date Seed Particles Using Finite Element Method [Volume 13, Issue 2, 2026, Pages 347-355]
Sari, Nasmi Herlina Optimizing Mahogany Peel Powder-Polyester Composites for Sustainable Automotive Interior Panels: Effects of Filler Content on Mechanical and Thermal Properties [Volume 13, Issue 2, 2026, Pages 439-450]
Sattanathan, Muthuvel Mechanical Testing of Novel and Conventional Geopolymer Brick Dried under Passive Solar Dryer with Ferric Chloride Dihydrate as Phase Change Material [Volume 13, Issue 1, 2026, Pages 23-35]
Seth, Tanmoy State Space Approach to Moore-Gibson-Thompson Generalized Piezo-Thermoelasticity with Memory-Dependent Derivative [Volume 13, Issue 2, 2026, Pages 451-463]
Shaikh, Javed Sikandar Mechanical and Tribological Characterization of Eco-Friendly Brake Pads Using Banana Peel Powder as a Sustainable Friction Material [Volume 13, Issue 2, 2026, Pages 427-437]
Shariati, Mahmoud Large Deflection Analysis of Graphene Sheets in the Thermal Environment Using Higher-Order Nonlocal Strain Gradient Principle [Volume 13, Issue 1, 2026, Pages 117-128]
Sharma, Avinash Mechanical and Physical Properties Observations for Cu-Gr-SiC Composite Synthesized by Powder Metallurgy [Volume 13, Issue 2, 2026, Pages 339-345]
Sharma, Ramesh Suryanarayana Performance Evaluation of Epoxy-Based Natural Composites Reinforced with Flax and Flax-Ramie Fiber [Volume 13, Issue 1, 2026, Pages 13-22]
Sharma, Sumit Kumar Vibration Analysis of FGM Annular Plate with Linearly Varying Thickness for Several Boundary Conditions [Volume 13, Issue 2, 2026, Pages 475-494]
Sheykholeslami, Mohammad Reza Parametric Investigation of Particle Movements in Ultrasonic Levitation Process Using Piezoelectric Materials [Volume 13, Issue 2, 2026, Pages 357-369]
Singsang, Witawat Biodegradation, Mechanical and Physical Properties of Poly(butylene succinate) and Natural Rubber Compound Blend Filled with Activated Carbon from Coconut Fruit [Volume 13, Issue 1, 2026, Pages 157-169]
Siriyanna, Manjunath Yadav Reinforcement Surface Modification Effect on the Microstructure, Mechanical, and Tensile Fractography of Al2219 Alloy B4C Composites [Volume 13, Issue 1, 2026, Pages 197-210]
Sittitanadol, Ing-orn Biodegradation, Mechanical and Physical Properties of Poly(butylene succinate) and Natural Rubber Compound Blend Filled with Activated Carbon from Coconut Fruit [Volume 13, Issue 1, 2026, Pages 157-169]
Sittitanadol, Ing-orn Characterization of Physical and Mechanical Properties, and Morphology of Wood Composites Derived from Milk Bottles and Teak Sawdust Powder [Volume 13, Issue 2, 2026, Pages 259-269]
Soleimanimehr, Hamid Experimental Analysis of the Effect of Mechanical Topology on the Surface of Biological Microgripper Made of Ionic-Polymer Metal Composite Smart Material [Volume 13, Issue 1, 2026, Pages 143-156]
Somdee, Patcharapon Biodegradation, Mechanical and Physical Properties of Poly(butylene succinate) and Natural Rubber Compound Blend Filled with Activated Carbon from Coconut Fruit [Volume 13, Issue 1, 2026, Pages 157-169]
Somdee, Patcharapon Characterization of Physical and Mechanical Properties, and Morphology of Wood Composites Derived from Milk Bottles and Teak Sawdust Powder [Volume 13, Issue 2, 2026, Pages 259-269]
Srakaew, Nuan La-ong Biodegradation, Mechanical and Physical Properties of Poly(butylene succinate) and Natural Rubber Compound Blend Filled with Activated Carbon from Coconut Fruit [Volume 13, Issue 1, 2026, Pages 157-169]
Srakaew, Nuan La-ong Characterization of Physical and Mechanical Properties, and Morphology of Wood Composites Derived from Milk Bottles and Teak Sawdust Powder [Volume 13, Issue 2, 2026, Pages 259-269]
Subravel, Visvalingam Prediction and Parametric Effect in Drilling of Natural Fiber Laminate Using Combined Taguchi- Artificial Neural Network Approach [Volume 13, Issue 2, 2026, Pages 415-426]
Suteja, Suteja Optimizing Mahogany Peel Powder-Polyester Composites for Sustainable Automotive Interior Panels: Effects of Filler Content on Mechanical and Thermal Properties [Volume 13, Issue 2, 2026, Pages 439-450]
T
Taghavian, Hossein Statistical Analysis of Delamination Effect on Natural Frequency of Composite Laminated Plate [Volume 13, Issue 1, 2026, Pages 129-142]
Taghipoor, Hossein Enhancing Mechanical Properties of Polypropylene Composites Reinforced with Date Palm Fiber Using Maleic Anhydride Grafted Polypropylene as a Compatibilizer [Volume 13, Issue 1, 2026, Pages 211-226]
Torabizadeh, Mohammad Amin Applying an Artificial Neural Network to Predict the Mechanical Properties of Epoxy Resin with Graphite Additive After Water Absorption [Volume 13, Issue 1, 2026, Pages 245-257]
Tran, Trung Thanh A Finite Element Formulation for Analyzing the Nonlinear Static Response of Bi-functionally Graded Microbeam Resting on Elastic Foundation Under Various Loads [Volume 13, Issue 1, 2026, Pages 227-243]
V
Velmurugan, Samikkannu Prediction and Parametric Effect in Drilling of Natural Fiber Laminate Using Combined Taguchi- Artificial Neural Network Approach [Volume 13, Issue 2, 2026, Pages 415-426]
W
Wardani, Deni Optimizing Mahogany Peel Powder-Polyester Composites for Sustainable Automotive Interior Panels: Effects of Filler Content on Mechanical and Thermal Properties [Volume 13, Issue 2, 2026, Pages 439-450]
Y
Yas, Mohammad Hossein Study on Thermal, Mechanical and Dynamic Properties of Epoxy Matrix with Hybrid of Nanoclay/Carbon Nanotube [Volume 13, Issue 1, 2026, Pages 37-56]
