A
-
A, Mohammad Younus
Experimental Investigation of Repair of Glass Epoxy Composite With Edge And Center Crack By Epoxy Resin [(Articles in Press)]
-
Aamir, Muhammad Talha
Experimental Investigation and Simulation of Electro-Mechanical Behaviour of Hybrid Sandwich Composite Radomes for Aerospace Applications [Volume 11, Issue 2, 2024, Pages 401-412]
-
Abazadeh, Babak
Graphene-based Polymer Nano-composites - A Review [Volume 7, Issue 2, 2020, Pages 333-346]
-
Abbasi, M.
An Analytical Study on Effects of adding Nanoparticles to Water and Enhancement in Thermal Properties Based on Falkner-Skan Model [Volume 1, Issue 1, 2014, Pages 27-35]
-
Abdollahpour, Hasan
Microwave-Assisted Two-Step Sintering of Al/8wt%TiC Composite Prepared by Powder Metallurgy [Volume 8, Issue 2, 2021, Pages 291-298]
-
Abdollahzadeh, Pouya
On the Nonlinear Dynamics of an Energy Harvesting Device Based on Magnetostriction [Volume 8, Issue 1, 2021, Pages 33-40]
-
Abdoos, Hassan
On the Study of Mechanical Properties of Aluminum/Nano-Alumina Composites Produced via Powder Injection Molding [Volume 3, Issue 1, 2016, Pages 45-51]
-
Abdoos, Hassan
Sintered Steel Composites Reinforced with Ceramic Nanoparticles: Fabrication, Characteristics and Wear Behavior [Volume 6, Issue 2, 2019, Pages 191-200]
-
Abdulkareem, M. T.
Mechanical, Crystallographic, and Microstructural Analysis of Polymer Composites Developed from Iron Filings and Polystyrene Wastes [Volume 9, Issue 1, 2022, Pages 137-145]
-
Abdulkareem, S. A.
Mechanical, Crystallographic, and Microstructural Analysis of Polymer Composites Developed from Iron Filings and Polystyrene Wastes [Volume 9, Issue 1, 2022, Pages 137-145]
-
Abdullah, َAmir
Ultrasonic Assisted Drilling of Carbon Fiber Reinforced Plastic Composites with Non-Rotating Vibratory Tool [Volume 9, Issue 1, 2022, Pages 147-154]
-
Abdullah, Orhan Sabah
Investigation of Thermal Fatigue Behavior for HDPE Composites Reinforced by Nano Alumina [Volume 11, Issue 2, 2024, Pages 335-340]
-
Abedini, Vahid
Experimental Study on Surface Roughness and Cutting Force in Turning of Al7032 Reinforced with SiC Using Taguchi Design [Volume 8, Issue 1, 2021, Pages 69-76]
-
Abedini, Vahid
Tensile and Flexural Properties of 3D-Printed Polylactic Acid/Continuous Carbon Fiber Composite [Volume 10, Issue 2, 2023, Pages 407-418]
-
Adeniyi, A. G.
Mechanical, Crystallographic, and Microstructural Analysis of Polymer Composites Developed from Iron Filings and Polystyrene Wastes [Volume 9, Issue 1, 2022, Pages 137-145]
-
Adeniyi, Adedayo Sheriff
Characterization of Thevetia Peruviana (Yellow Oleander) Shell Ash Powder as a Possible Filler in Polymer Composites [Volume 8, Issue 1, 2021, Pages 109-117]
-
Afshari, H.
Size-dependent Effects on the Vibration Behavior of a Ti-moshenko Microbeam subjected to Pre-stress Loading based on DQM [Volume 3, Issue 2, 2016, Pages 99-112]
-
Afshari, Hassan
Transverse Vibration for Non-uniform Timoshenko Nano-beams [Volume 2, Issue 1, 2015, Pages 1-16]
-
Afzali Alvars, Hamed
Interfacial Characteristics of Graphene/Polymer Nanocomposites by Molecular Dynamics Simulation and Evaluating Effects of that on Mechanical Properties of Nanocomposites by FEM [Volume 11, Issue 2, 2024, Pages 321-334]
-
Aghadavoudi, Farshid
Molecular Dynamics Simulation of Functional and Hybrid Epoxy Based Nanocomposites [Volume 7, Issue 2, 2020, Pages 233-243]
-
Aghajani, F.
An Analytical Study on Effects of adding Nanoparticles to Water and Enhancement in Thermal Properties Based on Falkner-Skan Model [Volume 1, Issue 1, 2014, Pages 27-35]
-
Aghayari, Reza
Experimental Investigating to Increases the Fire Resistance of the Ultra-High-Performance Concrete by using Hybrid Fibers [Volume 9, Issue 2, 2022, Pages 377-386]
-
Ahmadi, Hamed
Experimental and Numerical Investigation on the Flexural Behavior of Composite-Reinforced Top-Hat Shape Beam [Volume 8, Issue 1, 2021, Pages 149-156]
-
Ahmadi, Hamed
Crashworthiness Study of an Innovative Helmet Liner Composed of an Auxetic Lattice Structure and PU Foam [Volume 9, Issue 1, 2022, Pages 25-35]
-
Ahmadi, Omid
Transient Thermal Stresses Analysis in a FPGM Cylinder [Volume 6, Issue 2, 2019, Pages 81-94]
-
Ahmadvand, Ahmad
An Analytical Study on the Indentation of a Layered Composite Beam and its Utilization in Low Velocity Impact Response [Volume 9, Issue 1, 2022, Pages 155-162]
-
Ahmed, Mostaid
Analysis of Electrically Shorted and Open Cases on Love Waves Propagating in Piezoelectric Layer Embedded over a Fiber-Reinforced Substrate [Volume 12, Issue 1, 2025, Pages 1-12]
-
Akgul, Yasin
Mechanical and Tribological Behaviors of Chopped Carbon/Glass Fiber Reinforced Hybrid Epoxy Composites [Volume 9, Issue 2, 2022, Pages 349-358]
-
Akshaya, A.
Propagation of shear horizontal wave at magneto-electro-elastic structure subjected to mechanically imperfect interface [(Articles in Press)]
-
Akumalla, Ravi Kiran
Active Vibration Control of Laminated Composite Beam Operating in Thermal Environment using PZT-5H Patches [Volume 9, Issue 2, 2022, Pages 387-398]
-
Alaei, Mohammad Hossein
Enhancing Strength of Nomex Sandwich Structures through the Utilization of Nano Clay Dispersed Epoxy Resin: A Study in Aerospace Applications [(Articles in Press)]
-
Alalhessabi, S.
The Structural and Mechanical Properties of Al-2.5%wt. B4C Met-al Matrix Nano-composite Fabricated by the Mechanical Alloying [Volume 2, Issue 1, 2015, Pages 39-44]
-
Alasvand Zarasvand, Kamran
Effects of Nanotube/Matrix Interface on Multi-Walled Carbon Nanotube Reinforced Polymer Mechanical Properties [Volume 4, Issue 3, 2017, Pages 211-223]
-
Alavi, Majid
High-order Analysis of Linear Vibrations of a ModeratleyThick Sandwich Panel With an Electrorheological Core [Volume 7, Issue 2, 2020, Pages 177-188]
-
Albooyeh, Alireza
Influence of Different Foaming Conditions on the Mechanical, Physical, and Structural Properties of Polypropylene Foam [Volume 6, Issue 2, 2019, Pages 225-237]
-
Albooyeh, A.R.
The Effect of Processing Conditions on the Mechanical Properties of Polypropylene/Mesoporous Silica-Hydroxyapatite Hybrid Nanocomposites [Volume 3, Issue 2, 2016, Pages 73-82]
-
Alfiyah, S.
Physical and Mechanical Properties of Biodegradable Film from Taro Starch (Xanthosoma Sagittifolium) and Duck Bone Gelatin [Volume 9, Issue 2, 2022, Pages 213-220]
-
Ali, Imran
Free Vibration and Buckling Analyses of Nanobeam Embedded in Pasternak Foundation [Volume 10, Issue 2, 2023, Pages 419-436]
-
Alibeigloo, Akbar
Elasticity Solution of Functionally Graded Carbon Nanotube Reinforced Composite Cylindrical Panel [Volume 1, Issue 1, 2014, Pages 49-60]
-
Alihemmati, Jaber
Frequency Analysis of Functionally Graded Carbon Nanotube-reinforced Cylindrical Panels by Mesh-free Galerkin Method [Volume 8, Issue 2, 2021, Pages 415-424]
-
Alikhani, Hossein
Mechanical and Physical Properties of Glass-Fiber Reinforced Polymer Rods Manufactured by Different Pultrusion Methods [Volume 8, Issue 1, 2021, Pages 99-107]
-
Alimirzaei, Sajad
Nonlocal Buckling and Vibration Analysis of Triple-Walled ZnO Piezoelectric Timoshenko Nano-beam Subjected to Magneto-Electro-Thermo-Mechanical Loadings [Volume 2, Issue 2, 2015, Pages 113-126]
-
Alinejad, Javad
3D Numerical Simulation of Fibers Arrangement Effects On Thermal Conductivity of Polymer Matrix Composite [Volume 9, Issue 1, 2022, Pages 59-73]
-
Alinezhad, Ahmad Ali
Free Vibration Analysis of Size-Dependent Multi-Layered Graphene Sheets Based on Strain Gradient Elasticity Theory [Volume 9, Issue 2, 2022, Pages 275-285]
-
Alizadeh, Mohsen
Health Monitoring for Composite under Low-Cycle Cyclic Loading, Considering Effects of Acoustic Emission Sensor Type [Volume 6, Issue 1, 2019, Pages 19-26]
-
Alizadeh, Parisa
Numerical Crashworthiness Analysis of Graded Layered Foam- Filled Tubes Under Axial Loading [Volume 6, Issue 1, 2019, Pages 57-64]
-
Alizad-Farzin, Yousef
A Case Study for Fabrication of MWCNT-TiO2 Hybrid Reinforced Aluminium Matrix Nanocomposites [Volume 1, Issue 2, 2014, Pages 107-111]
-
Allaee, Mohammad Hossein
Experimental and Numerical Investigation of the Effect of Embedding Steel Wires inside the Foam of GFRP/Foam Sandwich Panel under Three-Point Bending Load [Volume 11, Issue 2, 2024, Pages 271-280]
-
Al-Mwanes, Ammar Oudah
Experimental Investigating to Increases the Fire Resistance of the Ultra-High-Performance Concrete by using Hybrid Fibers [Volume 9, Issue 2, 2022, Pages 377-386]
-
Alsbaale, Yousef Alyaas Younes
Mechanical and Tribological Behaviors of Chopped Carbon/Glass Fiber Reinforced Hybrid Epoxy Composites [Volume 9, Issue 2, 2022, Pages 349-358]
-
Amaniyah, M.
Physical and Mechanical Properties of Biodegradable Film from Taro Starch (Xanthosoma Sagittifolium) and Duck Bone Gelatin [Volume 9, Issue 2, 2022, Pages 213-220]
-
Amir, Saeed
Nonlinear Magneto-Nonlocal Vibration Analysis of Coupled Piezoelectric Micro-Plates Reinforced with Agglomerated CNTs [Volume 7, Issue 1, 2020, Pages 109-119]
-
Amiri, Ali Reza
Finite Difference Analysis of 2D Stress Wave Propagation in Two Dimensional Functionally Graded Ceramics-Metals Composites [Volume 8, Issue 2, 2021, Pages 321-334]
-
Amiri, Farzad
Experimental and Numerical Investigation of the Effect of Embedding Steel Wires inside the Foam of GFRP/Foam Sandwich Panel under Three-Point Bending Load [Volume 11, Issue 2, 2024, Pages 271-280]
-
Amirjan, Mostafa
The Role of Natural Additives on the Wear and Friction Proper-ties of Nanocomposites for Friction Applications [Volume 6, Issue 2, 2019, Pages 159-165]
-
Amoochi, Abbas
Numerical Optimization of Non-destructive Ultrasonic Testing in Identifying Defects in Composite Structure of Pine Tree Trunk [Volume 11, Issue 1, 2024, Pages 249-258]
-
Amosa, M. K.
Mechanical, Crystallographic, and Microstructural Analysis of Polymer Composites Developed from Iron Filings and Polystyrene Wastes [Volume 9, Issue 1, 2022, Pages 137-145]
-
Anerao, Prashant
A Comparative Study of Machine Learning Techniques for Predicting Mechanical Properties of Fused Deposition Modelling (FDM)-Based 3D-Printed Wood/PLA Biocomposite [(Articles in Press)]
-
Angadi, Shrishail B
Effect of Ceramic Boron Carbide Particles Addition on the Mechanical and Microstructural Characteristics of Al7020 Alloy Composites [(Articles in Press)]
-
Ansari, Reza
Environmental Effects on Mechanical Properties of Glass/Epoxy and Fiber Metal Laminates, Part I: Hygrothermal Aging [Volume 4, Issue 3, 2017, Pages 187-196]
-
Ansari, Reza
Environmental effects on mechanical properties of glass/epoxy and fiber metal laminates, Part II: Isothermal aging [Volume 4, Issue 3, 2017, Pages 197-205]
-
Arab, B.
Mechanical Properties of CNT-Reinforced Polymer Nano-composites: A Molecular Dynamics Study [Volume 3, Issue 2, 2016, Pages 113-121]
-
Arab Hasanabade, Majid
Strengthening of One-Way Slabs Using Composite Laminates of HPFRCC Including Synthetic Fibers PPS [Volume 9, Issue 1, 2022, Pages 185-197]
-
Arabzadeh-Ziari, Erfan
Static Bending, Vibration, and Buckling Responses of a Sandwich Beam Composed of Five Layers Considering Honeycomb Core and CNTRC with SMA Particles and Temperature-Dependent Material Properties Using SSDT [(Articles in Press)]
-
Arabzadeh-Ziari, Mohammad
Static Bending, Vibration, and Buckling Responses of a Sandwich Beam Composed of Five Layers Considering Honeycomb Core and CNTRC with SMA Particles and Temperature-Dependent Material Properties Using SSDT [(Articles in Press)]
-
Ardebili, Amirreza
Enhancing Strength of Nomex Sandwich Structures through the Utilization of Nano Clay Dispersed Epoxy Resin: A Study in Aerospace Applications [(Articles in Press)]
-
Arefi, Mohammad
The Effect of Temperature Dependency on the Thermo-Electro-Elastic Analysis of Functionally Graded Piezoelectric Spherical Shell [Volume 6, Issue 1, 2019, Pages 1-8]
-
Arefi, Mohammad
Thermoelastic Analysis of a Functionally Graded Simple Blade Using First-Order Shear Deformation Theory [Volume 7, Issue 1, 2020, Pages 147-155]
-
Arora, Gaurav
Exploring Multi-scale Thermal Behaviour in Pin-on-Disc Systems for Organic, Metallic, Ceramic, and Polymer Composites [(Articles in Press)]
-
Arshid, Ehsan
Nonlinear Magneto-Nonlocal Vibration Analysis of Coupled Piezoelectric Micro-Plates Reinforced with Agglomerated CNTs [Volume 7, Issue 1, 2020, Pages 109-119]
-
Asanjarani, Ali
Free Vibration Analysis of 2D Functionally Graded Annular Plate considering the Effect of Material Composition via 2D Differential Quadrature Method [Volume 2, Issue 2, 2015, Pages 95-111]
-
Asemi, Kamran
Numerical Investigation on Thermal Post-buckling Of Annular Sector Plates Made of FGM Via 3D Finite Element Method [Volume 8, Issue 2, 2021, Pages 309-320]
-
Asgari, Masoud
Crushing Analysis of Empty and Foam-Filled Cylindrical and Conical Corrugated Composite Tubes [Volume 6, Issue 1, 2019, Pages 35-44]
-
Asgari, Mohsen
Static Bending, Vibration, and Buckling Responses of a Sandwich Beam Composed of Five Layers Considering Honeycomb Core and CNTRC with SMA Particles and Temperature-Dependent Material Properties Using SSDT [(Articles in Press)]
-
Asgari, Tahmoores
Free Vibrations Analysis of Functionally Graded Rectangular Nano-plates based on Nonlocal Exponential Shear Deformation Theory [Volume 2, Issue 2, 2015, Pages 79-93]
-
Ashok, R. Banagar
Experimental and Finite Element Studies on Free Vibration of Areca Leaf Sheath Reinforced Polymer Composites [Volume 8, Issue 2, 2021, Pages 367-388]
-
Ashory, Mohammad Reza
Vibration Analysis of Circular Single-Layer Graphene Sheet Using Finite Element Method [Volume 6, Issue 2, 2019, Pages 131-138]
-
Ashrafian, Roozbeh
The Effect of Different Weighting Ratios, Length, and Thickness on Weighted Sum of the First Natural Frequency and Critical Buckling Load for a Laminated Composite Circular Cylindrical Shell [Volume 8, Issue 1, 2021, Pages 87-98]
-
Ashrafian, Roozbeh
Longitudinal Vibration of Nanobeams by Two-Phase Local/Nonlocal Elasticity, Rayleigh Theory, and Generalized Differential Quadrature Method [Volume 10, Issue 2, 2023, Pages 221-232]
-
Assadi, Abbass
Size-dependent Vibration Analysis of Non-uniform Mass Sensor Nanobeams [Volume 8, Issue 2, 2021, Pages 235-244]
-
Auradi, V
Mechanical Characterization and Wear Behavior of Nano TiO2 Particulates Reinforced Al7075 Alloy Composites [Volume 7, Issue 1, 2020, Pages 71-78]
-
Auradi, Virupaxi
Effect of Ceramic Boron Carbide Particles Addition on the Mechanical and Microstructural Characteristics of Al7020 Alloy Composites [(Articles in Press)]
-
Ayatollahi, M.R.
Atomic Simulation of Temperature Effect on the Mechanical Properties of Thin Films [Volume 2, Issue 1, 2015, Pages 31-38]
-
Azadi, Mahboobeh
A Comparative Study on the Microstructure and Mechanical Properties of Al-Si-Cu/1wt %NCP Composites after T6 Heat Treatment [Volume 7, Issue 1, 2020, Pages 129-136]
-
Azadi, Mohammad
Health Monitoring for Composite under Low-Cycle Cyclic Loading, Considering Effects of Acoustic Emission Sensor Type [Volume 6, Issue 1, 2019, Pages 19-26]
-
Azadi, Mohammad
Study of High-cycle Fatigue Properties in Bovine Tibia Bones based on Reliability and Scatter-band Predictions [Volume 7, Issue 2, 2020, Pages 255-261]
-
Azadi, Mohammad
Ultrasonic Assisted Drilling of Carbon Fiber Reinforced Plastic Composites with Non-Rotating Vibratory Tool [Volume 9, Issue 1, 2022, Pages 147-154]
-
Azarafza, Reza
Theoretical, numerical, and experimental analyses of free vibrations of glass fiber reinforced polymer plates with central cutouts and free boundaries [Volume 5, Issue 1, 2018, Pages 67-74]
-
Azarafza, Reza
Investigation of Free Vibration of Laminated Composite Conical Shell with Local Attached Mass [Volume 9, Issue 1, 2022, Pages 173-184]
-
Azhari, Mojtaba
Dynamic Stiffness Method for Free Vibration of Moderately Thick Functionally Graded Plates [Volume 3, Issue 1, 2016, Pages 15-30]
-
Azimpour Shishevan, Farzin
Graphene-based Polymer Nano-composites - A Review [Volume 7, Issue 2, 2020, Pages 333-346]
-
Azizi, Mohsen
Experimental Investigation on Quasi-Static Impact Response of Glass/Epoxy Composite Corrugated Core Sandwich Panels [Volume 10, Issue 2, 2023, Pages 283-294]
-
Azizi, Saber
On the Nonlinear Dynamics of an Energy Harvesting Device Based on Magnetostriction [Volume 8, Issue 1, 2021, Pages 33-40]
B
-
Babaei, Alireza
Vibration Characteristics of Functionally Graded Micro-Beam Carrying an Attached Mass [Volume 7, Issue 1, 2020, Pages 49-58]
-
Babaei, Masoud
Numerical Investigation on Thermal Post-buckling Of Annular Sector Plates Made of FGM Via 3D Finite Element Method [Volume 8, Issue 2, 2021, Pages 309-320]
-
Babu, Jalumedi
Multi-response Optimization while Drilling of Composite Laminate with Core Drill by Grey Entropy Fuzzy (GEF) Method [Volume 11, Issue 2, 2024, Pages 483-502]
-
Babu, Karthick
Thrust Force and Delamination Analysis on Redmud-Filled Coconut Sheath Fiber Polyester Composite [Volume 12, Issue 1, 2025, Pages 43-52]
-
Babu, Sunith
Effect of ON and OFF Axis Open Hole Tensile Testing of GFRP/Epoxy Composites [(Articles in Press)]
-
Babu L, Sunith
Influence of Kevlar on Impact Damage Assessment of Carbon Fibre Hybrid Composite Laminate [(Articles in Press)]
-
Baby, Riya
Analysis of SH-waves Propagating in Multiferroic Structure with Interfacial Imperfection [Volume 9, Issue 1, 2022, Pages 1-10]
-
Baghani, Hossein
Investigation of Free Vibration of Laminated Composite Conical Shell with Local Attached Mass [Volume 9, Issue 1, 2022, Pages 173-184]
-
Baghbani, Ramin
Mesh-free Dynamic Analyses of FGM Sandwich Plates Resting on A Pasternak Elastic Foundation [Volume 4, Issue 2, 2017, Pages 153-168]
-
Bahadorani, Navid
Large deformation elastic analysis of pressurized FGM cylindrical shells with Nonlinear Plane Elasticity Theory (NPET) [(Articles in Press)]
-
Baharvandi, Hamidreza
The Effect of Al Additive and Arc Melting Time on Synthesis of Ti3SiC2 MAX Phase using Ti/SiC/Al/Graphite [Volume 9, Issue 2, 2022, Pages 367-376]
-
Baharvandi, Hamidreza
The Effect of Nano-B4C Additive on Microstructure and Mechanical Properties of Pressureless Sintering SiC Bodies [Volume 10, Issue 1, 2023, Pages 29-42]
-
Bahmanabadi, Hamed
Study of High-cycle Fatigue Properties in Bovine Tibia Bones based on Reliability and Scatter-band Predictions [Volume 7, Issue 2, 2020, Pages 255-261]
-
Bahrami, Mohammad
Propagation of Matrix Cracking and Induced Delaminatin in Cross-Ply Composite Beams Subjected to Bending Loads [Volume 6, Issue 1, 2019, Pages 45-50]
-
Bakhsheshy, Ali
Free Natural Frequency Analysis of an FG Composite Rectangular Plate Coupled with Fluid using Rayleigh–Ritz Method [Volume 1, Issue 2, 2014, Pages 131-143]
-
Bakhshi, Arsalan
Study on Compression and Flexural Behavior of ABS-SiO2 Poly-mer Matrix Composite Fabricated by Hot Extrusion [Volume 6, Issue 2, 2019, Pages 239-247]
-
Banerjee, Sanjib
Modeling the Buckling Characteristics of Pineapple Leaf Fibre Reinforced Laminated Epoxy Composites [Volume 10, Issue 2, 2023, Pages 233-246]
-
Bangera, Mithil
Evaluation of Heat Resistance Characteristics of Fibrous Material for Cold Weather Application [Volume 11, Issue 1, 2024, Pages 231-238]
-
Baroi, Juhi
Analysis of SH-waves Propagating in Multiferroic Structure with Interfacial Imperfection [Volume 9, Issue 1, 2022, Pages 1-10]
-
Basati, F.
Dynamic and Buckling Analysis of Hybrid Composite Beam Strengthened with Carbon Fibers/Aramid Fibers under Temperature Gradient [Volume 11, Issue 1, 2024, Pages 203-216]
-
Basavaraju, B.
Experimental and Finite Element Studies on Free Vibration of Areca Leaf Sheath Reinforced Polymer Composites [Volume 8, Issue 2, 2021, Pages 367-388]
-
Bayat Kazazi, Mahdi
Numerical Optimization of Non-destructive Ultrasonic Testing in Identifying Defects in Composite Structure of Pine Tree Trunk [Volume 11, Issue 1, 2024, Pages 249-258]
-
Benammar, Samir
Failure Probability Analysis of Composite Pressure Tanks Using Subset Simulation [Volume 11, Issue 2, 2024, Pages 363-374]
-
Ben Daly, H.
Modeling of Hygrothermal Damage of Composite Materials [Volume 3, Issue 2, 2016, Pages 137-144]
-
Benedicta, Jose
Design and Analysis of Complementary Split Ring Resonator Based Low Profile Antenna Using Lightweight Polymers for Wireless, Radar, and Satellite Communication [(Articles in Press)]
-
Bharadvaj, Mayank
Thermo-mechanical and wear properties of natural fibre-reinforced epoxy composites for structural applications. [(Articles in Press)]
-
Bhaskar, Dhiraj
Geometrically Nonlinear Analysis of Laminated Composite Plates subjected to Uniform Distributed Load Using a New Hypothesis: the finite element method (FEM) Approach [Volume 7, Issue 2, 2020, Pages 271-285]
-
Bhowmick, Shubhankar
An Investigation of Stress and Deformation Behavior of Functionally Graded Timoshenko Beams subjected to Thermo-Mechanical Load [Volume 7, Issue 1, 2020, Pages 157-176]
-
Bhowmick, Shubhankar
Thermo–Elastic Stresses and Deformation Analysis of FG Rotating Hollow Spherical Body [Volume 9, Issue 1, 2022, Pages 125-136]
-
Biradar, Akash
Effect of Chilling & B4C content on Machining Efficiency and Surface Quality in Wire-Cut Machining of Aluminum Matrix Chilled Composites [Volume 11, Issue 2, 2024, Pages 341-350]
-
Bishnoi, Kamal
Complementary Split Ring Resonator-Inspired Antenna for Wearable Multiband Applications Using Biodegradable Polylactic Acid [(Articles in Press)]
-
Biswas, Amalendu
Higher Order Approximations for Bending of FG Beams Using B-Spline Collocation Technique [Volume 11, Issue 1, 2024, Pages 159-176]
-
Bohanon, Brandon
Material Mechanical Properties Prediction of Layer with Multidirectional Fiber Ply Reinforced Polymer Matrix Composites [Volume 9, Issue 2, 2022, Pages 221-227]
-
Borah, Partha Pratim
Modeling the Buckling Characteristics of Pineapple Leaf Fibre Reinforced Laminated Epoxy Composites [Volume 10, Issue 2, 2023, Pages 233-246]
-
Borhani, E.
The Structural and Mechanical Properties of Al-2.5%wt. B4C Met-al Matrix Nano-composite Fabricated by the Mechanical Alloying [Volume 2, Issue 1, 2015, Pages 39-44]
-
Borhani, E.
Effect of Particle Size on the Structural and Mechanical Properties of Al–AlN Nanocomposites Fabricated by Mechanical Alloying [Volume 2, Issue 2, 2015, Pages 73-78]
-
Borhani, Ehsan
Effects of reinforcement distribution on the mechanical properties of Al–Fe3O4 nanocomposites fabricated via accumulative roll bonding [Volume 5, Issue 2, 2018, Pages 131-139]
-
Bridjesh, P.
Comparison of Deflection in Two-Directional Functionally Graded Tapered Beam [Volume 11, Issue 1, 2024, Pages 191-202]
-
Bridjesh, Pappula
On Numerical Investigation of Buckling in Two-Directional Porous Functionally Graded Beam Using Higher Order Shear Deformation Theory [Volume 10, Issue 2, 2023, Pages 393-406]
-
Brijeshgangil, Brijesh
Thermo-mechanical and wear properties of natural fibre-reinforced epoxy composites for structural applications. [(Articles in Press)]
C
-
Chakrabarti, Anupam
Flexural Behaviour of Nanocomposite Plate with CNT Distribution and Agglomeration Effect [Volume 10, Issue 1, 2023, Pages 123-136]
-
Chakrabarti, Anupam
Free Vibration Response of Agglomerated Carbon Nanotube-Reinforced Nanocomposite Plates [Volume 10, Issue 1, 2023, Pages 167-194]
-
Chakrabarti, Anupam
Response of Agglomerated SWCNT Reinforced Nanocomposite Plate under Hygro-Thermal Loading [Volume 11, Issue 1, 2024, Pages 11-40]
-
Chalabi Tehran, Ata
A Study of the Effect of TPU and Clay Nanoparticles on the Mechanical Behavior of PBT-Based Nanocomposites [Volume 4, Issue 3, 2017, Pages 179-186]
-
Chalak, H D
Buckling Analysis of Functionally Graded Sandwich Beam Based on Third-Order Zigzag Theory [Volume 10, Issue 1, 2023, Pages 55-68]
-
Chatti, S.
Modeling of Hygrothermal Damage of Composite Materials [Volume 3, Issue 2, 2016, Pages 137-144]
-
Chatti, Sami
Springback Prediction of Sandwich Panel Using Machine Learning Methods [Volume 10, Issue 1, 2023, Pages 11-20]
-
Chaudhary, Vijaykumar
Artificial Neural Network (ANN) Approach to Predict Tensile Properties of Longitudinally Placed Fiber Reinforced Polymeric Composites including Interphase [(Articles in Press)]
-
Chaudhuri, Puja Basu
Maximization of Fundamental Frequency of Composite Stiffened Hypar Shell with Cutout by Taguchi Method [Volume 10, Issue 1, 2023, Pages 43-54]
-
Chauhan, Sumika
Bearing Response Prediction in Hydrothermal Aged Carbon Fiber Reinforced Epoxy Composite Joints using Machine Learning Techniques [(Articles in Press)]
-
Chavan, Yash
Evaluation of Heat Resistance Characteristics of Fibrous Material for Cold Weather Application [Volume 11, Issue 1, 2024, Pages 231-238]
-
Chikkanna, Anil Kyathasandra
Effect of Chilling & B4C content on Machining Efficiency and Surface Quality in Wire-Cut Machining of Aluminum Matrix Chilled Composites [Volume 11, Issue 2, 2024, Pages 341-350]
-
Chokshi, Sagar
Artificial Neural Network (ANN) Approach to Predict Tensile Properties of Longitudinally Placed Fiber Reinforced Polymeric Composites including Interphase [(Articles in Press)]
-
Choopanian Benis, Ali
Experimental Investigation on Quasi-Static Impact Response of Glass/Epoxy Composite Corrugated Core Sandwich Panels [Volume 10, Issue 2, 2023, Pages 283-294]
-
Christiyan K G, Jaya
Effect of ON and OFF Axis Open Hole Tensile Testing of GFRP/Epoxy Composites [(Articles in Press)]
-
Cug, Harun
Mechanical and Tribological Behaviors of Chopped Carbon/Glass Fiber Reinforced Hybrid Epoxy Composites [Volume 9, Issue 2, 2022, Pages 349-358]
D
-
Damania, Jay
A Meshfree Approach for Bending Analysis of Porous Rectangular FGM Plate Resting on Elastic Foundation [Volume 9, Issue 2, 2022, Pages 303-316]
-
Dang, Van Hieu
Buckling and Nonlinear Vibration of Functionally Graded Porous Micro-beam Resting on Elastic Foundation [Volume 9, Issue 1, 2022, Pages 75-88]
-
Daniali, M.
Dynamic Characteristics of Joined Steel and Carbon Fiber-Reinforced Plastic Tubes: Experimental and Numerical Investigation [Volume 4, Issue 2, 2017, Pages 88-97]
-
Darvizeh, Abolfazl
Environmental Effects on Mechanical Properties of Glass/Epoxy and Fiber Metal Laminates, Part I: Hygrothermal Aging [Volume 4, Issue 3, 2017, Pages 187-196]
-
Darvizeh, Abolfazl
Environmental effects on mechanical properties of glass/epoxy and fiber metal laminates, Part II: Isothermal aging [Volume 4, Issue 3, 2017, Pages 197-205]
-
Dashtbayazi, M. R.
Nonlinear Vibration Analysis of the Composite Cable using Perturbation Method and the Green-Lagrangian Nonlinear Strain [Volume 6, Issue 1, 2019, Pages 27-34]
-
Davar, A.
Free Vibration of Lattice Cylindrical Composite Shell Reinforced with Carbon Nano-tubes [Volume 2, Issue 1, 2015, Pages 61-72]
-
Davar, Ali
Theoretical, numerical, and experimental analyses of free vibrations of glass fiber reinforced polymer plates with central cutouts and free boundaries [Volume 5, Issue 1, 2018, Pages 67-74]
-
Davar, Ali
A New Three-Dimensional Refined Higher-Order Theory for Free Vibration Analysis of Composite Circular Cylindrical Shells [Volume 6, Issue 2, 2019, Pages 201-223]
-
Davar, Ali
Thermal Buckling and Thermal Induced free Vibration Analysis of Perforated Composite Plates: a Mathematical Model [Volume 7, Issue 1, 2020, Pages 15-23]
-
Davar, Ali
Free Vibration Analysis of Combined Cylindrical-Conical Composite Shells using First-Order Shear Deformation Theory [Volume 8, Issue 2, 2021, Pages 269-282]
-
Davar, Ali
Buckling Analysis of Composite Grid-Stiffened Cylindrical Shells Using a Generalized Equivalent Single Layer Theory [Volume 8, Issue 2, 2021, Pages 455-466]
-
Davar, Ali
Investigation of Free Vibration of Laminated Composite Conical Shell with Local Attached Mass [Volume 9, Issue 1, 2022, Pages 173-184]
-
Dhiman, Babita
Bearing Response Prediction in Hydrothermal Aged Carbon Fiber Reinforced Epoxy Composite Joints using Machine Learning Techniques [(Articles in Press)]
-
Doddamani, Saleemsab
Effect of Aging on Fracture Toughness of Al6061-Graphite Particulate Composites [Volume 6, Issue 2, 2019, Pages 139-146]
-
Doostmohamadi, Mahsa
Improving the Performance of Porous Concrete Composites Using Zeolite as a Coarse Grain [Volume 5, Issue 2, 2018, Pages 157-163]
-
Dwi Kartika, Lintang
Metallurgical Assessment of Graphite Reinforced Al-Cu-Mg Nanocomposites Produced by the Shaker Mill Method [Volume 10, Issue 1, 2023, Pages 103-110]
E
-
Ebrahami, F.
Assessment of Hydrostatic Stress and Thermo Piezoelectricity in a Laminated Multilayered Rotating Hollow Cylinder [Volume 8, Issue 1, 2021, Pages 77-86]
-
Ebrahami, Farzad
Vibration in an Electrically Affected Hygro-magneto-thermo-flexo Electric Nanobeam Embedded in Winkler-Pasternak Foundation [Volume 8, Issue 2, 2021, Pages 401-414]
-
Ebrahimi, Zohreh
Microstructure, Mechanical and Electrical Properties of Copper Matrix Composites Reinforced with Steel Nanoparticles [Volume 8, Issue 2, 2021, Pages 335-345]
-
Eghbali, Mohammadreza
On Moving Harmonic Load and Dynamic Response of Carbon Nanotube-Reinforced Composite Beams using Higher-Order Shear Deformation Theories [Volume 10, Issue 2, 2023, Pages 257-270]
-
Ekhteraei Toussi, Hamid
Delamination Analysis in Composite Root of a Carbon-Layer Reinforced Wind Turbine Blade [Volume 6, Issue 1, 2019, Pages 9-18]
-
Emami, J.
Free Vibration of Lattice Cylindrical Composite Shell Reinforced with Carbon Nano-tubes [Volume 2, Issue 1, 2015, Pages 61-72]
-
Emrahi, Reza
Investigation of Buckling Analysis of Epoxy/ Nanoclay/ Carbon Fiber Hybrid Laminated Nanocomposite: Using VARTM Technique for Preparation [Volume 3, Issue 1, 2016, Pages 63-71]
-
Eroglu, Mehmet
Multifunctional Properties of Metal Fibers Reinforced Polymer Composites – A Review [Volume 11, Issue 1, 2024, Pages 217-230]
-
Esfandiar, Milad
Capillary Effects on Surface Enhancement in a Non-Homogeneous Fibrous Porous Medium [Volume 5, Issue 1, 2018, Pages 83-90]
-
Esfandiari, Akbar
Damage Detection in Concrete Filled Tube Columns Based on Experimental Modal Data and Wavelet Technique [Volume 7, Issue 2, 2020, Pages 245-254]
-
Eskandari Jam, J.
Free Vibration of Lattice Cylindrical Composite Shell Reinforced with Carbon Nano-tubes [Volume 2, Issue 1, 2015, Pages 61-72]
-
Eskandari Jam, Jafar
Theoretical, numerical, and experimental analyses of free vibrations of glass fiber reinforced polymer plates with central cutouts and free boundaries [Volume 5, Issue 1, 2018, Pages 67-74]
-
Eskandari Jam, Jafar
Thermal Buckling and Thermal Induced free Vibration Analysis of Perforated Composite Plates: a Mathematical Model [Volume 7, Issue 1, 2020, Pages 15-23]
-
Eskandari Jam, Jafar
Free Vibration Analysis of Combined Cylindrical-Conical Composite Shells using First-Order Shear Deformation Theory [Volume 8, Issue 2, 2021, Pages 269-282]
-
Eskandari Jam, Jafar
Buckling Analysis of Composite Grid-Stiffened Cylindrical Shells Using a Generalized Equivalent Single Layer Theory [Volume 8, Issue 2, 2021, Pages 455-466]
-
Eskandari Jam, Jafar
Experimental and Numerical Investigation of the Effect of Embedding Steel Wires inside the Foam of GFRP/Foam Sandwich Panel under Three-Point Bending Load [Volume 11, Issue 2, 2024, Pages 271-280]
-
Eskandari Jam, Jafar
Molecular Dynamic Investigation of Graphene Oxide Presence and Three Experimental Distribution Methods in Reinforced Epoxy-Based Nanocomposites [(Articles in Press)]
-
Eskandari Jam, Jafar
Enhancing Strength of Nomex Sandwich Structures through the Utilization of Nano Clay Dispersed Epoxy Resin: A Study in Aerospace Applications [(Articles in Press)]
-
Eskandari-Jam, Jafar
A Semi-analytical Solution for 3-D Dynamic Analysis of Thick Continuously Graded Carbon Nanotube-reinforced Annular Plates Resting on a Two-parameter Elastic Foundation [Volume 1, Issue 2, 2014, Pages 113-130]
-
Eskandari Shahraki, Majid
Free Vibration Analysis of Combined Cylindrical-Conical Composite Shells using First-Order Shear Deformation Theory [Volume 8, Issue 2, 2021, Pages 269-282]
-
Eskandari Shahraki, Majid
Buckling Analysis of Composite Grid-Stiffened Cylindrical Shells Using a Generalized Equivalent Single Layer Theory [Volume 8, Issue 2, 2021, Pages 455-466]
-
Eskandariyan, Fahime
Investigation of Nonlinear Behavior of Composite Bracing Structures with Concrete Columns and Steel Beams (RCS) Applying Finite Element Method [Volume 7, Issue 1, 2020, Pages 25-37]
-
Eskandarzadeh, Shahin
Influence of Different Foaming Conditions on the Mechanical, Physical, and Structural Properties of Polypropylene Foam [Volume 6, Issue 2, 2019, Pages 225-237]
-
Eslami-Farsani, R.
Accelerated Heat Aging Study of Phenolic/Basalt Fiber Reinforced Composites [Volume 3, Issue 1, 2016, Pages 1-7]
-
Eslami-Farsani, R.
Investigation of Tensile Characteristics of an Epoxy Matrix Com-posite with Uni-Directional and Hybrid Tissue Natural Hemp Fibers [Volume 6, Issue 2, 2019, Pages 181-190]
-
Esmkhani, Masood
Mechanical Properties of Graphene/Epoxy Nanocomposites under Static and Flexural Fatigue Loadings [Volume 1, Issue 1, 2014, Pages 1-7]
-
Eticha, Andinet Kumella
Mechanical and Tribological Behaviors of Chopped Carbon/Glass Fiber Reinforced Hybrid Epoxy Composites [Volume 9, Issue 2, 2022, Pages 349-358]
F
-
Falahzade, Sina
An Analytical Approach to Thermoelastic Bending of Simply Supported Advanced Ribbed Composite Plates [Volume 5, Issue 2, 2018, Pages 173-185]
-
Fallah, Abolfazl
Free Vibrations Analysis of Functionally Graded Rectangular Nano-plates based on Nonlocal Exponential Shear Deformation Theory [Volume 2, Issue 2, 2015, Pages 79-93]
-
Fallah, Abolfazl
Free Vibration Analysis of Size-Dependent, Functionally Graded, Rectangular Nano/Micro-plates based on Modified Nonlinear Couple Stress Shear Deformation Plate Theories [Volume 4, Issue 2, 2017, Pages 127-137]
-
Fallah, Famida
Non-Linear Analysis of Functionally Graded Sector Plates with Simply Supported Radial Edges Under Transverse Loading [Volume 6, Issue 1, 2019, Pages 65-74]
-
Fallahzadeh Rastehkenar, Sina
The Effects of the Moving Load and the Attached Mass-Spring-Damper System Interactions on the Dynamic Responses of the Composite Plates: An Analytical Approach [Volume 2, Issue 1, 2015, Pages 17-30]
-
Farahmandrad, Sahar
Nonlinear Torsional Vibration Analysis of Nanorods in the Presence of Surface Energy Effect: Multi-Mode Galerkin Method [Volume 9, Issue 2, 2022, Pages 229-242]
-
Faraji Kalajahi, Pouya
A Study of the Effect of TPU and Clay Nanoparticles on the Mechanical Behavior of PBT-Based Nanocomposites [Volume 4, Issue 3, 2017, Pages 179-186]
-
Farhadinia, M.
Mechanical Properties of CNT-Reinforced Polymer Nano-composites: A Molecular Dynamics Study [Volume 3, Issue 2, 2016, Pages 113-121]
-
Farhadinia, Mahmood
Failure Pressure Prediction of Semi Spherical GFRP Shells in Thermal Environment [Volume 7, Issue 1, 2020, Pages 103-108]
-
Faroughi, Shirko
Adaptive Tunable Vibration Absorber using Shape Memory Alloy [Volume 2, Issue 1, 2015, Pages 55-60]
-
Faroughi, Shirko
Vibration Characteristics of Functionally Graded Micro-Beam Carrying an Attached Mass [Volume 7, Issue 1, 2020, Pages 49-58]
-
Faroughi, Shirko
Size-Dependent Nonlinear Dynamics of a Non-Uniform Piezoelectric Microbeam Based on the Strain Gradient Theory [Volume 7, Issue 2, 2020, Pages 321-331]
-
Farrokhabadi, Amin
Damage Energy Evaluation in [55/-55]9 Composite Pipes using Acoustic Emission Method [Volume 2, Issue 2, 2015, Pages 127-134]
-
Farrokhabadi, Amin
Propagation of Matrix Cracking and Induced Delaminatin in Cross-Ply Composite Beams Subjected to Bending Loads [Volume 6, Issue 1, 2019, Pages 45-50]
-
Farzannasab, Mahshad
Study of High-cycle Fatigue Properties in Bovine Tibia Bones based on Reliability and Scatter-band Predictions [Volume 7, Issue 2, 2020, Pages 255-261]
-
Farzin, Saeed
Improving the Performance of Porous Concrete Composites Using Zeolite as a Coarse Grain [Volume 5, Issue 2, 2018, Pages 157-163]
-
Fayzulla, Bayan Jabbar
Multifunctional Properties of Metal Fibers Reinforced Polymer Composites – A Review [Volume 11, Issue 1, 2024, Pages 217-230]
-
Fazeli, Hamid
Molecular Dynamic Investigation of Graphene Oxide Presence and Three Experimental Distribution Methods in Reinforced Epoxy-Based Nanocomposites [(Articles in Press)]
-
Fazelzadeh, S. Ahmad
Buckling Analysis of Spherical Composite Panels Reinforced by Carbon Nanotube [Volume 2, Issue 2, 2015, Pages 135-144]
-
Fazilati, Jamshid
Dynamic Stability of Moderately Thick Composite Laminated Skew Plates using Finite Strip Method [Volume 2, Issue 2, 2015, Pages 145-150]
-
Fazli, Mostafa
Investigation of Capsulated Epoxy and DCPD in Epoxy Based Self-healing Composites - DFT Calculation and Experimental Analysis [Volume 5, Issue 2, 2018, Pages 165-171]
-
Feli, Saeed
Analytical Modeling of Functionally Graded Carbon Nanotube-Reinforced Composite Plates under Low-Velocity Impact [Volume 11, Issue 2, 2024, Pages 281-294]
-
Fereidoon, A.B.
The Effect of Processing Conditions on the Mechanical Properties of Polypropylene/Mesoporous Silica-Hydroxyapatite Hybrid Nanocomposites [Volume 3, Issue 2, 2016, Pages 73-82]
-
Fereidoon, Abdolhossein
Optimization of Hybrid Composite Laminate Based on the Frequency using Imperialist Competitive Algorithm [Volume 1, Issue 1, 2014, Pages 37-48]
-
Fereidoon, Abdolhossein
A Numerical and Analytical Solution for the Free Vibration of Laminated Composites Using Different Plate Theories [Volume 4, Issue 1, 2017, Pages 75-87]
-
Fereidoon, Abdoulhossein
Low-Velocity Impact Behavior of Foam Core Sandwich Panels with Different Face Sheet Layers: Numerical and Experimental Study [Volume 10, Issue 1, 2023, Pages 111-122]
-
Feyz Sayadian, Ayat
Size-Dependent Nonlinear Dynamics of a Non-Uniform Piezoelectric Microbeam Based on the Strain Gradient Theory [Volume 7, Issue 2, 2020, Pages 321-331]
-
Firouzbakht, Vahid
Predicting Young’s Modulus of Aggregated Carbon Nanotube Reinforced Polymer [Volume 1, Issue 1, 2014, Pages 9-16]
-
Freidani, Meisam
Elasto-dynamic Response Analysis of a Curved Composite Sandwich Beam Subjected to the Loading of a Moving Mass [Volume 7, Issue 2, 2020, Pages 347-354]
G
-
G, Rathnakar
A Comparative Study on the Effect of HNT and Nano-Alumina Particles on the Mechanical Properties of Vacuum Bag Moulded Glass-Epoxy Nanocomposites [Volume 8, Issue 1, 2021, Pages 119-131]
-
G, Ravichandran
A Comparative Study on the Effect of HNT and Nano-Alumina Particles on the Mechanical Properties of Vacuum Bag Moulded Glass-Epoxy Nanocomposites [Volume 8, Issue 1, 2021, Pages 119-131]
-
Ganesh, Radhakrishnan
Optimization of Wear Behaviour on Mg-TiO2 Nanocomposite Using Taguchi Grey Relational Analysis [Volume 10, Issue 1, 2023, Pages 151-156]
-
Geetha, Narayanan Kannaiyan
On Numerical Investigation of Buckling in Two-Directional Porous Functionally Graded Beam Using Higher Order Shear Deformation Theory [Volume 10, Issue 2, 2023, Pages 393-406]
-
Ghaderi, Mohammad Reza
Numerical Optimization of Non-destructive Ultrasonic Testing in Identifying Defects in Composite Structure of Pine Tree Trunk [Volume 11, Issue 1, 2024, Pages 249-258]
-
Ghadimi, Mojtaba
Elastoplastic Analysis of Pressurized FG rotating Thick Cylinders Based on High-Order Shear Deformation Theory and Radial Return Method [Volume 11, Issue 1, 2024, Pages 119-130]
-
Ghadirian, Hossein
Free Vibration Analysis of Composite Plates with Artificial Springs by Trigonometric Ritz Method [Volume 1, Issue 1, 2014, Pages 61-70]
-
Ghaemi, Fatemeh
Failure Pressure Prediction of Semi Spherical GFRP Shells in Thermal Environment [Volume 7, Issue 1, 2020, Pages 103-108]
-
Ghannad, Mehdi
Electro-Elastic Analysis of Finite Length FGPM Cylinders Subjected to Electromechanical Loading Using First-Order Electric Potential Theory [Volume 8, Issue 1, 2021, Pages 15-31]
-
Ghannad, Mehdi
Elastoplastic Analysis of Pressurized FG rotating Thick Cylinders Based on High-Order Shear Deformation Theory and Radial Return Method [Volume 11, Issue 1, 2024, Pages 119-130]
-
Ghannad, Mehdi
Large deformation elastic analysis of pressurized FGM cylindrical shells with Nonlinear Plane Elasticity Theory (NPET) [(Articles in Press)]
-
Gharaei, Amin
Parametric Analysis of Position and Direction of Laminated Composite C-Spar on Aeroelastic Flutter in Aircraft Tail [Volume 11, Issue 2, 2024, Pages 351-362]
-
Ghasemi, Ahmad Reza
Distribution of Residual Stresses in Polymer Reinforced Carbon Nanotubes and Laminated Carbon Fibers [Volume 4, Issue 1, 2017, Pages 9-18]
-
Ghasemi, Ahmad Reza
Open-Hole Size and Thermal Cycling Effects on Mass Loss and Surface Degradation of Polymer Matrix Composites [Volume 4, Issue 2, 2017, Pages 111-116]
-
Ghasemi, Ahmad Reza
Creep Strain and Stress Analysis in Laminated Composite Pres-sure Vessels [Volume 5, Issue 2, 2018, Pages 141-147]
-
Ghasemi, Ahmad Reza
Discrepancies Between Free Vibration of FML and Composite Cylindrical Shells Reinforced by CNTs [Volume 6, Issue 2, 2019, Pages 105-115]
-
Ghasemi, Ahmad Reza
Effects of Magnetic Field in Creep Behavior of Three-Phase Laminated Composite Cylindrical Shells [Volume 6, Issue 1, 2019, Pages 51-56]
-
Ghasemi, Ahmad Reza
Buckling analysis of FML cylindrical shells under combined axial and torsional loading [Volume 7, Issue 2, 2020, Pages 263-270]
-
Ghasemi, Ahmad Reza
Thermal Variations of Thermo-Mechanical Loading Effects on Creep Stress and Strain Distribution in Multi-layered Composite Cylinder [Volume 9, Issue 1, 2022, Pages 115-123]
-
Ghasemi, Ahmad Reza
Minimal Mass and Maximal Buckling Load of Composite Hexagonal-Triangle Grid Structure using FSDT under External Hydrostatic Pressure [Volume 10, Issue 2, 2023, Pages 309-318]
-
Ghasemi, Ahmad Reza
Parametric Analysis of Position and Direction of Laminated Composite C-Spar on Aeroelastic Flutter in Aircraft Tail [Volume 11, Issue 2, 2024, Pages 351-362]
-
Ghasemi, Ahmad-Reza
Size-dependent Bending of Geometrically Nonlinear of Micro-Laminated Composite Beam based on Modified Couple Stress Theory [Volume 3, Issue 1, 2016, Pages 53-62]
-
Ghasemi, Behrooz
Evaluation of hardness and wear resistance of nano-sized titanium-carbide-reinforced commercially cast aluminum alloy matrices [Volume 5, Issue 1, 2018, Pages 75-81]
-
Ghasemi, Behrooz
Investigation of Hardness, Morphology and Structural Analysis of NiCrBSi Composite Coating on Plain Carbon Steel [Volume 6, Issue 2, 2019, Pages 75-80]
-
Ghasemi, Mohsen
Sensitivity Analysis of Vibrating Laminated Composite Rec-tangular Plates in Interaction with Inviscid Fluid Using EFAST Method [Volume 7, Issue 2, 2020, Pages 219-231]
-
Ghasemi Ghalebahman, Ahmad
Delamination Analysis in Composite Root of a Carbon-Layer Reinforced Wind Turbine Blade [Volume 6, Issue 1, 2019, Pages 9-18]
-
Ghashochi-Bargh, Hadi
Vibration Optimization of Fiber-Metal Laminated Composite Shallow Shell Panels Using an Adaptive PSO Algorithm [Volume 4, Issue 2, 2017, Pages 99-110]
-
Ghavanloo, Esmaeal
Buckling Analysis of Spherical Composite Panels Reinforced by Carbon Nanotube [Volume 2, Issue 2, 2015, Pages 135-144]
-
Ghazavi, Mohammad Reza
Free Vibration Analysis of Composite Plates with Artificial Springs by Trigonometric Ritz Method [Volume 1, Issue 1, 2014, Pages 61-70]
-
Ghazifard, Payman
Numerical Crashworthiness Analysis of Graded Layered Foam- Filled Tubes Under Axial Loading [Volume 6, Issue 1, 2019, Pages 57-64]
-
Ghiasvand, Mohsen
Molecular Dynamic Investigation of Graphene Oxide Presence and Three Experimental Distribution Methods in Reinforced Epoxy-Based Nanocomposites [(Articles in Press)]
-
Ghoddosian, Ali
The Effect of Different Weighting Ratios, Length, and Thickness on Weighted Sum of the First Natural Frequency and Critical Buckling Load for a Laminated Composite Circular Cylindrical Shell [Volume 8, Issue 1, 2021, Pages 87-98]
-
Ghods, H.
Effect of Particle Size on the Structural and Mechanical Properties of Al–AlN Nanocomposites Fabricated by Mechanical Alloying [Volume 2, Issue 2, 2015, Pages 73-78]
-
Gholhaki, Majid
Damage Detection in Concrete Filled Tube Columns Based on Experimental Modal Data and Wavelet Technique [Volume 7, Issue 2, 2020, Pages 245-254]
-
Ghorai, Anjana
Propagation Behavior of Love-Type Waves in a Poro-elastic Medium using Staggered Grid Finite Difference Scheme [Volume 8, Issue 2, 2021, Pages 359-365]
-
Ghorbanpour-Arani, Ali
Biaxial Buckling and Bending of Smart Nanocomposite Plate Reinforced by CNTs using Extended Mixture Rule Approach [Volume 1, Issue 1, 2014, Pages 17-26]
-
Ghorbanzadeh Ahangari, Morteza
Investigation of Capsulated Epoxy and DCPD in Epoxy Based Self-healing Composites - DFT Calculation and Experimental Analysis [Volume 5, Issue 2, 2018, Pages 165-171]
-
Ghorbanzadeh-Ahangari, Morteza
Effect of Curvature on the Mechanical Properties of Graphene: A Density Functional Tight-binding Approach [Volume 3, Issue 1, 2016, Pages 9-13]
-
Ghugal, Y.M.
Static Flexure of Soft Core Sandwich Beams using Trigonometric Shear Deformation Theory [Volume 2, Issue 1, 2015, Pages 45-53]
-
Ghugal, Yuwaraj M.
Bending, buckling and free vibration responses of hyperbolic shear deformable FGM beams [Volume 5, Issue 1, 2018, Pages 13-24]
-
GOHIL, PIYUSH P
Artificial Neural Network (ANN) Approach to Predict Tensile Properties of Longitudinally Placed Fiber Reinforced Polymeric Composites including Interphase [(Articles in Press)]
-
Golestanian, Hossein
Effects of Nanotube/Matrix Interface on Multi-Walled Carbon Nanotube Reinforced Polymer Mechanical Properties [Volume 4, Issue 3, 2017, Pages 211-223]
-
Golestanian, Hossein
Molecular Dynamics Simulation of Functional and Hybrid Epoxy Based Nanocomposites [Volume 7, Issue 2, 2020, Pages 233-243]
-
Golmakani, M.E.
Buckling Analysis of Functionally Graded Cylindrical Shells Under Mechanical and Thermal Loads by Dynamic Relaxation Method [Volume 7, Issue 2, 2020, Pages 297-311]
-
Golmakani, M.E.
Buckling Analysis of Nano Composite Plates Based on Combination of the Incremental Load Technique and Dynamic Relaxation Method [Volume 8, Issue 1, 2021, Pages 133-148]
-
Golmakani, Mohammad Esmaiel
Experimental and Numerical Study on the Strength of Repaired Steel Pipes with Composite Patches under Internal Pressure [Volume 10, Issue 2, 2023, Pages 437-448]
-
Golmakani, Mohammad Esmaiel
Nonlinear Dynamic Analysis of Annular FG Porous Sandwich Plates Reinforced by Graphene Platelets [Volume 11, Issue 1, 2024, Pages 131-148]
-
Goodarzi, Hamed
Microwave-Assisted Two-Step Sintering of Al/8wt%TiC Composite Prepared by Powder Metallurgy [Volume 8, Issue 2, 2021, Pages 291-298]
-
Govindhan Radhakrishnan, Rajesh Kanna
Optimization of AA6351-SiC-B4C Hybrid Composites in Wire EDM Using Grey Relation Technique [Volume 11, Issue 2, 2024, Pages 385-400]
-
Gupta, Sneha
Initial Buckling Behavior of Elastically Supported Rectangular FGM Plate based on Higher Order Shear Deformation Theory via Spline RBF Method [Volume 11, Issue 1, 2024, Pages 59-72]
-
GUPTA, SNEHA
Engineering Behavior of Municipal Solid Waste Incinerated Ash with Compressible Soil: An Approach Towards the Waste Utilization & Stabilization of Compressible Soil [(Articles in Press)]
-
Gururaj, Chandran
A Review of Research Outcomes on Fabrication Methods and Investigations for Evaluating Fracture Behavior of Aluminum Metal Matrix Composites with its Applications [Volume 8, Issue 2, 2021, Pages 347-358]
H
-
Habibi, Nabard
Transient Thermal Stresses Analysis in a FPGM Cylinder [Volume 6, Issue 2, 2019, Pages 81-94]
-
Habibnejad Korayem, Moharram
Study of Laminated Composite MEMS and NEMS Performance in Nano Metric Operations [Volume 4, Issue 1, 2017, Pages 19-31]
-
Haftchenari, H.
Size Effect on the Damaged Areas of Glass/Epoxy Structures under Low Velocity Impact [Volume 1, Issue 2, 2014, Pages 81-85]
-
Haghighatkhah, Amir Reza
Mechanical Properties of Graphene/Epoxy Nanocomposites under Static and Flexural Fatigue Loadings [Volume 1, Issue 1, 2014, Pages 1-7]
-
Haghighi, Mahmoud
Molecular Dynamics Simulation of Functional and Hybrid Epoxy Based Nanocomposites [Volume 7, Issue 2, 2020, Pages 233-243]
-
Hajialimohammadi, Alireza
Ultrasonic Assisted Drilling of Carbon Fiber Reinforced Plastic Composites with Non-Rotating Vibratory Tool [Volume 9, Issue 1, 2022, Pages 147-154]
-
Hajinejad Sorkhi, Mohsen
Analytical and Numerical Solution of Heat Transfer Equation in Rectangular Composite Fins [Volume 9, Issue 1, 2022, Pages 199-211]
-
Hakim, Shokoufeh
Cured Poly(ethylene-g-maleic anhydride)/Graphene Nanocomposite: Properties and Characterization [Volume 5, Issue 1, 2018, Pages 1-12]
-
Hamidi, S.M.
An Analytical Study on Effects of adding Nanoparticles to Water and Enhancement in Thermal Properties Based on Falkner-Skan Model [Volume 1, Issue 1, 2014, Pages 27-35]
-
Hariharan, Sreeram
Optimization of AA6351-SiC-B4C Hybrid Composites in Wire EDM Using Grey Relation Technique [Volume 11, Issue 2, 2024, Pages 385-400]
-
Harwande, S.
Quick Review and Assessment of Thermal Stress Analyses for Exact and Assumed Temperature Distribution for Composite and Sandwich Laminates [Volume 10, Issue 2, 2023, Pages 343-362]
-
Hasanabadi, Mohammad
Production and Investigation of Natural Zeolite-TiO2/CuO Nanoparticles Composite [Volume 10, Issue 1, 2023, Pages 205-210]
-
Hassan, Md Mehadi
Material Mechanical Properties Prediction of Layer with Multidirectional Fiber Ply Reinforced Polymer Matrix Composites [Volume 9, Issue 2, 2022, Pages 221-227]
-
Hatami, Shahabeddin
Dynamic Stiffness Method for Free Vibration of Moderately Thick Functionally Graded Plates [Volume 3, Issue 1, 2016, Pages 15-30]
-
Hayati, Sajad
Investigation of Tensile Characteristics of an Epoxy Matrix Com-posite with Uni-Directional and Hybrid Tissue Natural Hemp Fibers [Volume 6, Issue 2, 2019, Pages 181-190]
-
Hayati, Sajad
Artificial Intelligence Method for Predicting Mechanical Properties of Sand/Glass Reinforced Polymer: a New Model [Volume 8, Issue 2, 2021, Pages 245-268]
-
Hedayati, F.
An Analytical Study on Effects of adding Nanoparticles to Water and Enhancement in Thermal Properties Based on Falkner-Skan Model [Volume 1, Issue 1, 2014, Pages 27-35]
-
Heidari-Rarani, Mohammad
Modal Characteristics of Composite Beams with Single Delamination- A Simple Analytical Technique [Volume 1, Issue 2, 2014, Pages 97-106]
-
Hemalatha, K.
Propagation of shear horizontal wave at magneto-electro-elastic structure subjected to mechanically imperfect interface [(Articles in Press)]
-
Hemmatian, Hossein
Optimization of Hybrid Composite Laminate Based on the Frequency using Imperialist Competitive Algorithm [Volume 1, Issue 1, 2014, Pages 37-48]
-
Hemmatian Soorki, Ali
Experimental and Numerical Investigation of Reinforcement Sheet Effect on the Bending Strength of Corrugated Composite Panels [Volume 8, Issue 1, 2021, Pages 1-13]
-
Heshmati, Mahmood
Artificial Intelligence Method for Predicting Mechanical Properties of Sand/Glass Reinforced Polymer: a New Model [Volume 8, Issue 2, 2021, Pages 245-268]
-
Heydari Beni, Mohsen
Thermal Buckling and Thermal Induced free Vibration Analysis of Perforated Composite Plates: a Mathematical Model [Volume 7, Issue 1, 2020, Pages 15-23]
-
Heydari Beni, Mohsen
Free Vibration Analysis of Combined Cylindrical-Conical Composite Shells using First-Order Shear Deformation Theory [Volume 8, Issue 2, 2021, Pages 269-282]
-
Heydari Beni, Mohsen
Buckling Analysis of Composite Grid-Stiffened Cylindrical Shells Using a Generalized Equivalent Single Layer Theory [Volume 8, Issue 2, 2021, Pages 455-466]
-
H L, Nandeesh
Influence of Kevlar on Impact Damage Assessment of Carbon Fibre Hybrid Composite Laminate [(Articles in Press)]
-
Homayooni, Ahmad
Study of Laminated Composite MEMS and NEMS Performance in Nano Metric Operations [Volume 4, Issue 1, 2017, Pages 19-31]
-
Hoseini, Seyed Hamed
On the Nonlinear Dynamics of an Energy Harvesting Device Based on Magnetostriction [Volume 8, Issue 1, 2021, Pages 33-40]
-
Hossain, M. R.
An Experimental and Numerical Approach of Polymer Composites Based on Jute-Bamboo Natural Fiber [Volume 9, Issue 1, 2022, Pages 105-113]
-
Hosseini, Mehdi
Elasto-dynamic Response Analysis of a Curved Composite Sandwich Beam Subjected to the Loading of a Moving Mass [Volume 7, Issue 2, 2020, Pages 347-354]
-
Hosseini, Mehdi
An Analytical Study on the Indentation of a Layered Composite Beam and its Utilization in Low Velocity Impact Response [Volume 9, Issue 1, 2022, Pages 155-162]
-
Hosseini, Mohammad
A Case Study on the Influence of Friction Coefficient and Rotational Speed on Transient Thermoelastic Response of FGM Rotating Cylinder [Volume 9, Issue 2, 2022, Pages 399-408]
-
Hosseini Farrash, Seyyed Mahdi
Experimental Study on Amine-Functionalized Carbon Nanotubes’ Effect on the Thermomechanical Properties of CNT/Epoxy Nano-composites [Volume 5, Issue 1, 2018, Pages 41-48]
-
Hosseinpour, Komeil
Creep Strain and Stress Analysis in Laminated Composite Pres-sure Vessels [Volume 5, Issue 2, 2018, Pages 141-147]
-
Hosseinpour, Komeil
Effects of Magnetic Field in Creep Behavior of Three-Phase Laminated Composite Cylindrical Shells [Volume 6, Issue 1, 2019, Pages 51-56]
-
Hosseinpour, Komeil
Thermal Variations of Thermo-Mechanical Loading Effects on Creep Stress and Strain Distribution in Multi-layered Composite Cylinder [Volume 9, Issue 1, 2022, Pages 115-123]
-
H Soudmand, Behzad
Numerical Simulation of a Hybrid Nanocomposite Containing Ca-CO3 and Short Glass Fibers Subjected to Tensile Loading [Volume 4, Issue 2, 2017, Pages 117-125]
I
-
Iftitah, R.
Physical and Mechanical Properties of Biodegradable Film from Taro Starch (Xanthosoma Sagittifolium) and Duck Bone Gelatin [Volume 9, Issue 2, 2022, Pages 213-220]
-
Ighalo, J. O.
Mechanical, Crystallographic, and Microstructural Analysis of Polymer Composites Developed from Iron Filings and Polystyrene Wastes [Volume 9, Issue 1, 2022, Pages 137-145]
-
Ihueze, Christopher Chukwutoo
The Graft of ANN-FEM Technique in Macro-mechanics of Multi-oriented Natural Fiber/Polyester Laminates [Volume 8, Issue 1, 2021, Pages 51-68]
-
Imani, Kazem
Crashworthiness Study of an Innovative Helmet Liner Composed of an Auxetic Lattice Structure and PU Foam [Volume 9, Issue 1, 2022, Pages 25-35]
-
Inala, Ramu
Influence of Hygrothermal Environment and FG Material on Natural Frequency and Parametric Instability of Plates [Volume 7, Issue 1, 2020, Pages 89-101]
-
Iourzikene, Zouhir
Failure Probability Analysis of Composite Pressure Tanks Using Subset Simulation [Volume 11, Issue 2, 2024, Pages 363-374]
-
Iqbal, Zafar
Experimental Investigation and Simulation of Electro-Mechanical Behaviour of Hybrid Sandwich Composite Radomes for Aerospace Applications [Volume 11, Issue 2, 2024, Pages 401-412]
-
Islam, M. T.
An Experimental and Numerical Approach of Polymer Composites Based on Jute-Bamboo Natural Fiber [Volume 9, Issue 1, 2022, Pages 105-113]
J
-
J, Prabhakaran
Modeling and Numerical prediction on mechanical behaviors of hybrid fiber reinforced polymer bio composites using Fuzzy logic algorithm [(Articles in Press)]
-
Jabbari, Amirhossein
Experimental Investigation of FGM Dental Implant Properties Made from Ti/HA Composite [Volume 4, Issue 3, 2017, Pages 233-237]
-
Jadidi, Tohid
Ultrasonic Assisted Drilling of Carbon Fiber Reinforced Plastic Composites with Non-Rotating Vibratory Tool [Volume 9, Issue 1, 2022, Pages 147-154]
-
Jafari, Ali Asghar
Active control of free and forced vibration of rotating laminated composite cylindrical shells embedded with magnetostrictive layers based on classical shell theory [Volume 7, Issue 2, 2020, Pages 355-369]
-
Jafari, Ali Asghar
Nonlinear Vibration of Rotating Laminated Composite Cross-ply Cylindrical Shell on Nonlinear Rotating Elastic Foundation [Volume 9, Issue 2, 2022, Pages 317-334]
-
Jafari, Behrouz
Cured Poly(ethylene-g-maleic anhydride)/Graphene Nanocomposite: Properties and Characterization [Volume 5, Issue 1, 2018, Pages 1-12]
-
Jafari, Hojat
Nonlinear Dynamic Analysis of Annular FG Porous Sandwich Plates Reinforced by Graphene Platelets [Volume 11, Issue 1, 2024, Pages 131-148]
-
Jafari, Mohammad
Optimization of infinite composite plates with quasi-triangular holes under in-plane loading [Volume 5, Issue 2, 2018, Pages 115-130]
-
Jafari, Seyed Mohammad
Health Monitoring for Composite under Low-Cycle Cyclic Loading, Considering Effects of Acoustic Emission Sensor Type [Volume 6, Issue 1, 2019, Pages 19-26]
-
Jafari, Seyed Sajad
Analytical Modeling of Functionally Graded Carbon Nanotube-Reinforced Composite Plates under Low-Velocity Impact [Volume 11, Issue 2, 2024, Pages 281-294]
-
Jafari Fesharaki, Javad
Mechanical Behavior and Optimization of Functionally Graded Hollow Cylinder with an Elliptic Hole [Volume 7, Issue 2, 2020, Pages 189-201]
-
Jafari Mofrad-Taheri, M.
Static and Free Vibration Analyses of Functionally Graded Nano-composite Plates Reinforced by Wavy Carbon Nanotubes Resting on a Pasternak Elastic Foundation [Volume 3, Issue 2, 2016, Pages 123-135]
-
Jafarinezhad, Mohammad Reza
Compression Analysis of Hollow Cylinder Basalt Continuous Filament Epoxy Composite Filled with Shape Memory Wire [Volume 4, Issue 3, 2017, Pages 225-232]
-
Jaferzadeh Khoramabadian, Ali Asghar
Investigation of Tensile Characteristics of an Epoxy Matrix Com-posite with Uni-Directional and Hybrid Tissue Natural Hemp Fibers [Volume 6, Issue 2, 2019, Pages 181-190]
-
Jaiswal, Soumyajeet
Design and Development of a Pine Needle Briquetting Machine for the Uttarakhand Region of India [(Articles in Press)]
-
Jam, J.E.
Mechanical Properties of CNT-Reinforced Polymer Nano-composites: A Molecular Dynamics Study [Volume 3, Issue 2, 2016, Pages 113-121]
-
Jamal-Omidi, Majid
Experimental Investigation on Quasi-Static Impact Response of Glass/Epoxy Composite Corrugated Core Sandwich Panels [Volume 10, Issue 2, 2023, Pages 283-294]
-
Jandaghian, Ali-Akbar
Nonlinear Torsional Vibration of Size-Dependent Functionally Graded Rods [Volume 11, Issue 1, 2024, Pages 41-58]
-
Jangi, Reza
Experimental Study of Buckling of Reinforced Conical Composite Shell Under Hydrostatic Loading [Volume 9, Issue 2, 2022, Pages 359-366]
-
Jatti, Vijaykumar S
Quantum Machine Learning Approach for the Prediction of Surface Roughness in Additive Manufactured Specimens [(Articles in Press)]
-
Javadian, Mohammad
Artificial Intelligence Method for Predicting Mechanical Properties of Sand/Glass Reinforced Polymer: a New Model [Volume 8, Issue 2, 2021, Pages 245-268]
-
Javanmiri, Saeed
Artificial Intelligence Method for Predicting Mechanical Properties of Sand/Glass Reinforced Polymer: a New Model [Volume 8, Issue 2, 2021, Pages 245-268]
-
Jawaid, S. M. Ali
Flexural Behaviour of Nanocomposite Plate with CNT Distribution and Agglomeration Effect [Volume 10, Issue 1, 2023, Pages 123-136]
-
Jawaid, S. M. Ali
Free Vibration Response of Agglomerated Carbon Nanotube-Reinforced Nanocomposite Plates [Volume 10, Issue 1, 2023, Pages 167-194]
-
Jawaid, S. M. Ali
Response of Agglomerated SWCNT Reinforced Nanocomposite Plate under Hygro-Thermal Loading [Volume 11, Issue 1, 2024, Pages 11-40]
-
Jayappa, Kumaraswamy
Effect of Chilling & B4C content on Machining Efficiency and Surface Quality in Wire-Cut Machining of Aluminum Matrix Chilled Composites [Volume 11, Issue 2, 2024, Pages 341-350]
-
Jha, Vinay Chandra
Polyester/Kota Stone Dust Composite: A Comprehensive Investigation of Mechanical and Sliding Wear Properties [Volume 11, Issue 2, 2024, Pages 375-384]
-
Jhala, Ramdevsinh Lalubha
Mechanical Characterization of Glass-Basalt Hybrid Composites with Different Fiber Weight Fraction [Volume 11, Issue 2, 2024, Pages 295-308]
-
Joshi, Ayush
Design and Development of a Pine Needle Briquetting Machine for the Uttarakhand Region of India [(Articles in Press)]
K
-
Kabiri, Ali
Sensitivity Analysis of Fiber-Reinforced Lamina Micro-Electro-Mechanical Switches with Nonlinear Vibration Using a Higher Order Hamiltonian Approach [Volume 5, Issue 1, 2018, Pages 25-39]
-
Kabiri Ataabadi, Abdulreza
Experimental and Numerical Investigation of Reinforcement Sheet Effect on the Bending Strength of Corrugated Composite Panels [Volume 8, Issue 1, 2021, Pages 1-13]
-
Kadkhodayan, Mehran
Application of Bi-Directional Functionally Graded Material Model for Free Vibration Analysis of Rotating Euler-Bernoulli Nanobeams [Volume 8, Issue 2, 2021, Pages 389-399]
-
Kafi, Mohamad Ali
Investigation of Nonlinear Behavior of Composite Bracing Structures with Concrete Columns and Steel Beams (RCS) Applying Finite Element Method [Volume 7, Issue 1, 2020, Pages 25-37]
-
Kaleemulla K, Mohamed
Effect of Aging on Fracture Toughness of Al6061-Graphite Particulate Composites [Volume 6, Issue 2, 2019, Pages 139-146]
-
Kalidindi, krishna-Bhaskar
Experimental Modal Analysis of Viscoelastic Sandwich Structures [(Articles in Press)]
-
Kalidindi, Krishna Bhaskar
Free Vibration Analysis of Simply Supported and Clamped Functionally Graded Rectangular Plate Using Coupled Displacement Field Method [(Articles in Press)]
-
Kallannavar, Vinayak
Active Vibration Control of Laminated Composite Beam Operating in Thermal Environment using PZT-5H Patches [Volume 9, Issue 2, 2022, Pages 387-398]
-
Kamali, Fahimeh
A Comparative Study on the Microstructure and Mechanical Properties of Al-Si-Cu/1wt %NCP Composites after T6 Heat Treatment [Volume 7, Issue 1, 2020, Pages 129-136]
-
Kamali, Kamran
A Novel Method for Considering Interlayer Effects between Graphene Nanoribbons and Elastic Medium in Free Vibration Analysis [Volume 7, Issue 1, 2020, Pages 79-88]
-
Kami, Abdolvahed
An Investigation on Three-Point Bending of Foam-Filled Double Tubes and Parameter Optimization Using Response Surface Methodology [Volume 8, Issue 1, 2021, Pages 41-50]
-
Kami, Abdolvahed
Deposition of an Al/SiC Composite Coating on Steel by Friction Surfacing: Corrosion and Wear Properties [Volume 9, Issue 2, 2022, Pages 287-296]
-
Kami, Abdolvahed
Tensile and Flexural Properties of 3D-Printed Polylactic Acid/Continuous Carbon Fiber Composite [Volume 10, Issue 2, 2023, Pages 407-418]
-
Kannapiran, K.
Optimization of Wear Behaviour on Mg-TiO2 Nanocomposite Using Taguchi Grey Relational Analysis [Volume 10, Issue 1, 2023, Pages 151-156]
-
Kanoria, M.
Elasto-Thermodiffusive Response in a Two-Dimensional Transversely Isotropic Medium [Volume 6, Issue 2, 2019, Pages 95-104]
-
Kanoria, M.
Thermoelastic Interaction in a Three-Dimensional Layered Sandwich Structure [Volume 5, Issue 2, 2018, Pages 187-198]
-
Karami, Hojat
Improving the Performance of Porous Concrete Composites Using Zeolite as a Coarse Grain [Volume 5, Issue 2, 2018, Pages 157-163]
-
Karamooz, Mohammadreza
Elastic analysis of Shrink-fitted Thick FGM Cylinders Based on Linear Plane Elasticity Theory [Volume 7, Issue 1, 2020, Pages 121-127]
-
Karimi, Bromand
Analytical Modeling of Functionally Graded Carbon Nanotube-Reinforced Composite Plates under Low-Velocity Impact [Volume 11, Issue 2, 2024, Pages 281-294]
-
Karimi, Mahdi
Fluid-Structure Interaction of Vibrating Composite Piezoelectric Plates Using Exponential Shear Deformation Theory [Volume 7, Issue 1, 2020, Pages 59-69]
-
Karimi, Mahdi
Analytical Approach for Thermo-electro-mechanical Vibration of Piezoelectric Nanoplates Resting on Elastic Foundations based on Nonlocal Theory [Volume 6, Issue 2, 2019, Pages 117-129]
-
Karimi, Mahdi
Size-dependent Electro-Mechanical Vibration Analysis of FGPM Composite Plates using Modified Shear Deformation Theories [Volume 8, Issue 1, 2021, Pages 157-169]
-
Karimi, Mahdi
Free Vibration Analysis of Size-Dependent Multi-Layered Graphene Sheets Based on Strain Gradient Elasticity Theory [Volume 9, Issue 2, 2022, Pages 275-285]
-
Karimi, Mohamadhadi
Non-Linear Analysis of Functionally Graded Sector Plates with Simply Supported Radial Edges Under Transverse Loading [Volume 6, Issue 1, 2019, Pages 65-74]
-
Karimzadeh, A.
Atomic Simulation of Temperature Effect on the Mechanical Properties of Thin Films [Volume 2, Issue 1, 2015, Pages 31-38]
-
Karuppanan, Saravanan
Finite Element Analysis of Mechanical Properties of Basalt-Carbon Epoxy Hybrid Laminates [Volume 9, Issue 2, 2022, Pages 263-274]
-
Kashyap, Satadru
Modeling the Buckling Characteristics of Pineapple Leaf Fibre Reinforced Laminated Epoxy Composites [Volume 10, Issue 2, 2023, Pages 233-246]
-
Kattimani, Subhaschandra
Active Vibration Control of Laminated Composite Beam Operating in Thermal Environment using PZT-5H Patches [Volume 9, Issue 2, 2022, Pages 387-398]
-
Kaurase, Kalpit P
Influence of Filler Content on the Mechanical, Thermal, Moisture Absorption, and Biodegradability Properties of Bionanocomposite with Cellulosic Fibers Derived from Delonix Regia Fruits [Volume 11, Issue 1, 2024, Pages 73-86]
-
Kaveh, Amir
Enhancing Strength of Nomex Sandwich Structures through the Utilization of Nano Clay Dispersed Epoxy Resin: A Study in Aerospace Applications [(Articles in Press)]
-
Kebritchi, Abass
Molecular Dynamic Investigation of Graphene Oxide Presence and Three Experimental Distribution Methods in Reinforced Epoxy-Based Nanocomposites [(Articles in Press)]
-
Keshavarzian, Mehdi
High-order Analysis of Linear Vibrations of a ModeratleyThick Sandwich Panel With an Electrorheological Core [Volume 7, Issue 2, 2020, Pages 177-188]
-
Keshvari Tabatabaie, Fereshteh Sadat
Investigation of Hardness, Morphology and Structural Analysis of NiCrBSi Composite Coating on Plain Carbon Steel [Volume 6, Issue 2, 2019, Pages 75-80]
-
Keykha, Amir Hamzeh
Experimental investigation of the strength of glass fiber-reinforced concrete exposed to high temperature [Volume 5, Issue 2, 2018, Pages 103-113]
-
Keykha, Amir Hamzeh
Strengthening of Deficient Steel Sections using CFRP Composite under Combined Loading [Volume 7, Issue 2, 2020, Pages 287-296]
-
Khalili, Ali
Tensile and Flexural Properties of 3D-Printed Polylactic Acid/Continuous Carbon Fiber Composite [Volume 10, Issue 2, 2023, Pages 407-418]
-
Khalili, Mohammad Reza
Compression Analysis of Hollow Cylinder Basalt Continuous Filament Epoxy Composite Filled with Shape Memory Wire [Volume 4, Issue 3, 2017, Pages 225-232]
-
Khalili, S. Mohammad Reza
Investigation of Tensile Characteristics of an Epoxy Matrix Com-posite with Uni-Directional and Hybrid Tissue Natural Hemp Fibers [Volume 6, Issue 2, 2019, Pages 181-190]
-
Khalili, S.M.R.
Accelerated Heat Aging Study of Phenolic/Basalt Fiber Reinforced Composites [Volume 3, Issue 1, 2016, Pages 1-7]
-
Khalili, S.M.R.
The Effect of External Skin on Buckling Strength of Composite Lattice Cylinders Based on Numerical and Experimental Analysis [Volume 3, Issue 2, 2016, Pages 83-87]
-
Khamsin, Thanasak
Mechanical Properties of Hemp Fiber-Reinforced Polypropylene Composites for Drone Propeller Guard Application [(Articles in Press)]
-
Khan, Sikander
Initial Buckling Behavior of Elastically Supported Rectangular FGM Plate based on Higher Order Shear Deformation Theory via Spline RBF Method [Volume 11, Issue 1, 2024, Pages 59-72]
-
Khani, Mohammadreza
Synthesis and Characterization of MgF2/Cu Coating on Aluminum Produced by Sputtering Technique [Volume 9, Issue 2, 2022, Pages 297-302]
-
Kharaman-Nia, Iman
Experimental Study on Double-Walled Copper and Carbon/Epoxy Composite Tubes under the Axial Loading [Volume 1, Issue 2, 2014, Pages 71-79]
-
Kharate, Namrate
A Comparative Study of Machine Learning Techniques for Predicting Mechanical Properties of Fused Deposition Modelling (FDM)-Based 3D-Printed Wood/PLA Biocomposite [(Articles in Press)]
-
Khare, Sumit
Numerical Investigation on Free Vibration Response of Bi-Directional Porous Functionally Graded Circular/Annular Plates [Volume 9, Issue 2, 2022, Pages 243-262]
-
Kharrati, Khaled
Thermomechanical and Physical Properties of Plaster Concrete Reinforced with Natural Fibers [Volume 10, Issue 2, 2023, Pages 295-308]
-
Khatibi, Mohammad Mahdi
Vibration Analysis of Circular Single-Layer Graphene Sheet Using Finite Element Method [Volume 6, Issue 2, 2019, Pages 131-138]
-
Kheyroddin, Ali
Investigation of Nonlinear Behavior of Composite Bracing Structures with Concrete Columns and Steel Beams (RCS) Applying Finite Element Method [Volume 7, Issue 1, 2020, Pages 25-37]
-
Kheyroddin, Ali
Strengthening of One-Way Slabs Using Composite Laminates of HPFRCC Including Synthetic Fibers PPS [Volume 9, Issue 1, 2022, Pages 185-197]
-
Khirzin, M. H.
Physical and Mechanical Properties of Biodegradable Film from Taro Starch (Xanthosoma Sagittifolium) and Duck Bone Gelatin [Volume 9, Issue 2, 2022, Pages 213-220]
-
Khodabakhsh, Rasoul
Nonlinear Vibration Analysis of the Composite Cable using Perturbation Method and the Green-Lagrangian Nonlinear Strain [Volume 6, Issue 1, 2019, Pages 27-34]
-
Khodadadi, Ali
Molecular Dynamics Simulation of Functional and Hybrid Epoxy Based Nanocomposites [Volume 7, Issue 2, 2020, Pages 233-243]
-
Khodadadi, Mohammad
Precision Closed-form Solution for Out-of-plane Vibration of Rectangular Plates via Trigonometric Shear Deformation Theory [Volume 3, Issue 1, 2016, Pages 31-43]
-
Khoramishad, Hadi
Mechanical and Physical Properties of Glass-Fiber Reinforced Polymer Rods Manufactured by Different Pultrusion Methods [Volume 8, Issue 1, 2021, Pages 99-107]
-
Khorsand, Hamid
On the Study of Mechanical Properties of Aluminum/Nano-Alumina Composites Produced via Powder Injection Molding [Volume 3, Issue 1, 2016, Pages 45-51]
-
Khorshidi, K.
Analytical Solution for Sound Radiation of Vibrating Circular Plates coupled with Piezo-electric Layers [Volume 3, Issue 2, 2016, Pages 89-98]
-
Khorshidi, Korosh
Free Vibration Analysis of Composite Plates with Artificial Springs by Trigonometric Ritz Method [Volume 1, Issue 1, 2014, Pages 61-70]
-
Khorshidi, Korosh
Free Natural Frequency Analysis of an FG Composite Rectangular Plate Coupled with Fluid using Rayleigh–Ritz Method [Volume 1, Issue 2, 2014, Pages 131-143]
-
Khorshidi, Korosh
Precision Closed-form Solution for Out-of-plane Vibration of Rectangular Plates via Trigonometric Shear Deformation Theory [Volume 3, Issue 1, 2016, Pages 31-43]
-
Khorshidi, Korosh
Free Vibrations Analysis of Functionally Graded Rectangular Nano-plates based on Nonlocal Exponential Shear Deformation Theory [Volume 2, Issue 2, 2015, Pages 79-93]
-
Khorshidi, Korosh
Free Vibration Analysis of Size-Dependent, Functionally Graded, Rectangular Nano/Micro-plates based on Modified Nonlinear Couple Stress Shear Deformation Plate Theories [Volume 4, Issue 2, 2017, Pages 127-137]
-
Khorshidi, Korosh
Fluid-Structure Interaction of Vibrating Composite Piezoelectric Plates Using Exponential Shear Deformation Theory [Volume 7, Issue 1, 2020, Pages 59-69]
-
Khorshidi, Korosh
Analytical Approach for Thermo-electro-mechanical Vibration of Piezoelectric Nanoplates Resting on Elastic Foundations based on Nonlocal Theory [Volume 6, Issue 2, 2019, Pages 117-129]
-
Khorshidi, Korosh
Sensitivity Analysis of Vibrating Laminated Composite Rec-tangular Plates in Interaction with Inviscid Fluid Using EFAST Method [Volume 7, Issue 2, 2020, Pages 219-231]
-
Khorshidi, Korosh
High-order Analysis of Linear Vibrations of a ModeratleyThick Sandwich Panel With an Electrorheological Core [Volume 7, Issue 2, 2020, Pages 177-188]
-
Khorshidi, Korosh
Size-dependent Electro-Mechanical Vibration Analysis of FGPM Composite Plates using Modified Shear Deformation Theories [Volume 8, Issue 1, 2021, Pages 157-169]
-
Khorshidi, Korosh
Free Vibration Analysis of Size-Dependent Multi-Layered Graphene Sheets Based on Strain Gradient Elasticity Theory [Volume 9, Issue 2, 2022, Pages 275-285]
-
Khorshidi, Korosh
Buckling Analysis of Sandwich Structures with Metamaterials Core Integrated by Graphene Nanoplatelets Reinforced Polymer Composite [Volume 10, Issue 1, 2023, Pages 1-10]
-
Khorshidi, Korosh
Static Buckling and Free Vibration Analysis of Bi-Dimensional FG Metal Ceramic Porous Beam [Volume 11, Issue 1, 2024, Pages 149-158]
-
Khorshidi, Korosh
Investigation of Free Vibration in Fluid-Loaded Cylindrical Shells with a Three-Layer Sandwich Wall and an Auxetic Central Layer [Volume 12, Issue 1, 2025, Pages 53-72]
-
Khosravi, H.
Flexural Behavior of Fiber–Metal Laminates Reinforced with Surface-Functionalized Nanoclay [Volume 5, Issue 2, 2018, Pages 149-156]
-
Khostavan, Sepide
Investigation of Capsulated Epoxy and DCPD in Epoxy Based Self-healing Composites - DFT Calculation and Experimental Analysis [Volume 5, Issue 2, 2018, Pages 165-171]
-
Kiani, Sina
Buckling analysis of FML cylindrical shells under combined axial and torsional loading [Volume 7, Issue 2, 2020, Pages 263-270]
-
Kiarasi, Faraz
Numerical Investigation on Thermal Post-buckling Of Annular Sector Plates Made of FGM Via 3D Finite Element Method [Volume 8, Issue 2, 2021, Pages 309-320]
-
Kirtania, Sushen
Modeling the Buckling Characteristics of Pineapple Leaf Fibre Reinforced Laminated Epoxy Composites [Volume 10, Issue 2, 2023, Pages 233-246]
-
Kohandani, Reza
A New Three-Dimensional Refined Higher-Order Theory for Free Vibration Analysis of Composite Circular Cylindrical Shells [Volume 6, Issue 2, 2019, Pages 201-223]
-
Konovalov, Dmitriy
Effect of the Nature of Oxide Nanofillers on Changes in the Mechanical Properties of Epoxy Coatings under Thermal Cycling [Volume 10, Issue 1, 2023, Pages 195-204]
-
Koohestani, Hassan
Synthesis and Characterization of MgF2/Cu Coating on Aluminum Produced by Sputtering Technique [Volume 9, Issue 2, 2022, Pages 297-302]
-
Koohestani, Hassan
Production and Investigation of Natural Zeolite-TiO2/CuO Nanoparticles Composite [Volume 10, Issue 1, 2023, Pages 205-210]
-
Koohi Faegh Dehkourdi, Reza
A Case Study on the Influence of Friction Coefficient and Rotational Speed on Transient Thermoelastic Response of FGM Rotating Cylinder [Volume 9, Issue 2, 2022, Pages 399-408]
-
Koppanati, Meera Saheb
Free Vibration Analysis of Graphene Reinforced Laminated Composite Plates using Experimental Modal Testing [Volume 10, Issue 2, 2023, Pages 363-374]
-
Koppanati, Meera Saheb
Free Vibration Analysis of Simply Supported and Clamped Functionally Graded Rectangular Plate Using Coupled Displacement Field Method [(Articles in Press)]
-
Koppanati, Meera-Saheb
Experimental Modal Analysis of Viscoelastic Sandwich Structures [(Articles in Press)]
-
Kori, S A
Mechanical Characterization and Wear Behavior of Nano TiO2 Particulates Reinforced Al7075 Alloy Composites [Volume 7, Issue 1, 2020, Pages 71-78]
-
Kotasthane, Atharva M.
Finite Element Analysis of Mechanical Properties of Basalt-Carbon Epoxy Hybrid Laminates [Volume 9, Issue 2, 2022, Pages 263-274]
-
Kouchakzadeh, M. A.
Dynamic Characteristics of Joined Steel and Carbon Fiber-Reinforced Plastic Tubes: Experimental and Numerical Investigation [Volume 4, Issue 2, 2017, Pages 88-97]
-
Kozekanan, Behnam Salmany
The Effect of Al Additive and Arc Melting Time on Synthesis of Ti3SiC2 MAX Phase using Ti/SiC/Al/Graphite [Volume 9, Issue 2, 2022, Pages 367-376]
-
Kozekanan, Behnam Salmany
The Effect of Nano-B4C Additive on Microstructure and Mechanical Properties of Pressureless Sintering SiC Bodies [Volume 10, Issue 1, 2023, Pages 29-42]
-
Krishna Bhaskar, k
Free Vibration Analysis of Graphene Reinforced Laminated Composite Plates using Experimental Modal Testing [Volume 10, Issue 2, 2023, Pages 363-374]
-
Kulkarni, Atul
A Comparative Study of Machine Learning Techniques for Predicting Mechanical Properties of Fused Deposition Modelling (FDM)-Based 3D-Printed Wood/PLA Biocomposite [(Articles in Press)]
-
Kulkarni, Sharawari Prafulla
Quick Review and Assessment of Thermal Stress Analyses for Exact and Assumed Temperature Distribution for Composite and Sandwich Laminates [Volume 10, Issue 2, 2023, Pages 343-362]
-
Kumar, Chandan
A Meshfree Approach for Bending Analysis of Porous Rectangular FGM Plate Resting on Elastic Foundation [Volume 9, Issue 2, 2022, Pages 303-316]
-
Kumar, Manoj
Short Literature Survey on Fiber-Reinforced Hybrid Composites [Volume 11, Issue 2, 2024, Pages 425-452]
-
Kumar, Mohit
Bearing Response Prediction in Hydrothermal Aged Carbon Fiber Reinforced Epoxy Composite Joints using Machine Learning Techniques [(Articles in Press)]
-
Kumar, Nathi Venu
Free Vibration Analysis of 2D Functionally Graded Porous Beams Using Novel Higher-Order Theory [Volume 10, Issue 1, 2023, Pages 69-84]
-
Kumar, Rahul
Numerical Investigation on Free Vibration Response of Bi-Directional Porous Functionally Graded Circular/Annular Plates [Volume 9, Issue 2, 2022, Pages 243-262]
-
Kumar, Rahul
A Meshfree Approach for Bending Analysis of Porous Rectangular FGM Plate Resting on Elastic Foundation [Volume 9, Issue 2, 2022, Pages 303-316]
-
Kumar, Rahul
Initial Buckling Behavior of Elastically Supported Rectangular FGM Plate based on Higher Order Shear Deformation Theory via Spline RBF Method [Volume 11, Issue 1, 2024, Pages 59-72]
-
Kumar, S.
Propagation of shear horizontal wave at magneto-electro-elastic structure subjected to mechanically imperfect interface [(Articles in Press)]
-
Kumar, Santosh
Short Literature Survey on Fiber-Reinforced Hybrid Composites [Volume 11, Issue 2, 2024, Pages 425-452]
-
Kumar, Santosh
Effect of Ceramic Boron Carbide Particles Addition on the Mechanical and Microstructural Characteristics of Al7020 Alloy Composites [(Articles in Press)]
-
Kumar, Saurabh
Engineering Behavior of Municipal Solid Waste Incinerated Ash with Compressible Soil: An Approach Towards the Waste Utilization & Stabilization of Compressible Soil [(Articles in Press)]
-
Kumar, Yajuvindra
Effect of Elastically Restrained Edges on Free Transverse Vibration of Functionally Graded Porous Rectangular Plate [Volume 9, Issue 2, 2022, Pages 335-348]
-
Kumar, Yajuvindra
Free Vibration and Buckling Analyses of Nanobeam Embedded in Pasternak Foundation [Volume 10, Issue 2, 2023, Pages 419-436]
-
Kumar K, Ashok
Effect of ON and OFF Axis Open Hole Tensile Testing of GFRP/Epoxy Composites [(Articles in Press)]
-
Kumshikar, Radhakrishna R
Experimental and Numerical Analysis of Woven Bamboo and Jute Fiber Reinforced in Epoxy Composites [Volume 11, Issue 1, 2024, Pages 103-118]
-
Kureel, Saurabh
Crashworthy Behavior of Plain Weave Glass/Epoxy Composite Tubes Containing Different Extents of Overlap of Dropped Plies [Volume 11, Issue 1, 2024, Pages 87-102]
L
-
Laksanawati, T. A.
Physical and Mechanical Properties of Biodegradable Film from Taro Starch (Xanthosoma Sagittifolium) and Duck Bone Gelatin [Volume 9, Issue 2, 2022, Pages 213-220]
-
Lakshmanan, Karthikeyan
Studies on Progress of Aluminum Based Composites for Automotive Applications and its Damping Characteristics – A Review [Volume 12, Issue 1, 2025, Pages 25-42]
-
Lal, Achchhe
XFEM for Fracture Analysis of Centrally Cracked Laminated Plates Subjected to Biaxial Loads [Volume 8, Issue 1, 2021, Pages 213-234]
-
Lanka, Sairag
Experimental Modal Analysis of Viscoelastic Sandwich Structures [(Articles in Press)]
-
Le, Cuong Quoc
Two-dimensional Elasticity Solutions for Analyzing Free Vibration of Functionally Graded Porous Beams [(Articles in Press)]
-
Liaghat, Gholam Hossein
Investigation into The Behavior of Nano-composite Tubes at Ballistic Impact [Volume 4, Issue 3, 2017, Pages 207-210]
-
Liaghat, Gholam Hossein
Experimental and Numerical Investigation on the Flexural Behavior of Composite-Reinforced Top-Hat Shape Beam [Volume 8, Issue 1, 2021, Pages 149-156]
-
Loghman, Abbas
Thermoelastic Analysis of a Functionally Graded Simple Blade Using First-Order Shear Deformation Theory [Volume 7, Issue 1, 2020, Pages 147-155]
-
Loh-Mousavi, Mohsen
Experimental and Numerical Investigation of Reinforcement Sheet Effect on the Bending Strength of Corrugated Composite Panels [Volume 8, Issue 1, 2021, Pages 1-13]
M
-
M, Jayanandini
Design and Analysis of Complementary Split Ring Resonator Based Low Profile Antenna Using Lightweight Polymers for Wireless, Radar, and Satellite Communication [(Articles in Press)]
-
M, Nesasudha
S-Parameter Analysis of Three-Layered Aperture Coupled Antenna with a Flame Retardant-4 Composite Material as Substrate for Biomedical Applications [(Articles in Press)]
-
M, Nesasudha
Patch antennas with PDMS substrate to detect tumors and their data transmission through ERPO-OFDM modulation technique in VLC [(Articles in Press)]
-
Madah, Zeinab
Investigation of Nonlinear Behavior of Composite Bracing Structures with Concrete Columns and Steel Beams (RCS) Applying Finite Element Method [Volume 7, Issue 1, 2020, Pages 25-37]
-
Madah, Zeinab
Strengthening of One-Way Slabs Using Composite Laminates of HPFRCC Including Synthetic Fibers PPS [Volume 9, Issue 1, 2022, Pages 185-197]
-
Madarapu, Anjaiah
Multi-response Optimization while Drilling of Composite Laminate with Core Drill by Grey Entropy Fuzzy (GEF) Method [Volume 11, Issue 2, 2024, Pages 483-502]
-
Mafi, Mohammad
Evaluation of hardness and wear resistance of nano-sized titanium-carbide-reinforced commercially cast aluminum alloy matrices [Volume 5, Issue 1, 2018, Pages 75-81]
-
Mahapatra, Deepak
An Investigation of Stress and Deformation Behavior of Functionally Graded Timoshenko Beams subjected to Thermo-Mechanical Load [Volume 7, Issue 1, 2020, Pages 157-176]
-
Mahapatra, Deepak
Higher Order Approximations for Bending of FG Beams Using B-Spline Collocation Technique [Volume 11, Issue 1, 2024, Pages 159-176]
-
Mahbod, Mahshid
Crushing Analysis of Empty and Foam-Filled Cylindrical and Conical Corrugated Composite Tubes [Volume 6, Issue 1, 2019, Pages 35-44]
-
Mahdavi, Hamid Reza
Damage Energy Evaluation in [55/-55]9 Composite Pipes using Acoustic Emission Method [Volume 2, Issue 2, 2015, Pages 127-134]
-
Mahdi, Akeel Zeki
Investigation of Thermal Fatigue Behavior for HDPE Composites Reinforced by Nano Alumina [Volume 11, Issue 2, 2024, Pages 335-340]
-
Maher, Roham
Compression Analysis of Hollow Cylinder Basalt Continuous Filament Epoxy Composite Filled with Shape Memory Wire [Volume 4, Issue 3, 2017, Pages 225-232]
-
Mahesh, S.
Assessment of Hydrostatic Stress and Thermo Piezoelectricity in a Laminated Multilayered Rotating Hollow Cylinder [Volume 8, Issue 1, 2021, Pages 77-86]
-
Mahesh, Vinyas
Influence of Graphene Powder on the Physio-Mechanical Properties of Jute Reinforced Epoxy Composites for Automobile Applications [Volume 11, Issue 1, 2024, Pages 239-248]
-
Mahesh, Vinyas
Development and Mechanical Characterization of Light Weight Fiber Metal Laminate using Jute, Kenaf and Aluminium [Volume 11, Issue 2, 2024, Pages 259-270]
-
Mahesh, Vishwas
Statistical Approach of Determining the Effect of Cenosphere on the Tribological Behaviour of Jute Reinforced Polymer Based Composite [Volume 10, Issue 1, 2023, Pages 211-220]
-
Mahesh, Vishwas
Thermo-Mechanical Characterization of Jute-Bamboo Hybrid Thermoplastic Polymer Matrix Composites with Different Stacking Sequences for Automobile Applications [Volume 10, Issue 2, 2023, Pages 375-382]
-
Mahesh, Vishwas
Influence of Graphene Powder on the Physio-Mechanical Properties of Jute Reinforced Epoxy Composites for Automobile Applications [Volume 11, Issue 1, 2024, Pages 239-248]
-
Mahesh, Vishwas
Development and Mechanical Characterization of Light Weight Fiber Metal Laminate using Jute, Kenaf and Aluminium [Volume 11, Issue 2, 2024, Pages 259-270]
-
Mahesh, Vishwas
Feasibility Study on Application of Various MADM Approaches for Selection of Kenaf/Saw Dust Composite [Volume 12, Issue 1, 2025, Pages 13-24]
-
Mahmodzade Hoseyni, Seyed Ahmad
Optimization of infinite composite plates with quasi-triangular holes under in-plane loading [Volume 5, Issue 2, 2018, Pages 115-130]
-
Mahmoodi, Masoud
Using the Taguchi Method for Experimental and Numerical Investigations on the Square-Cup Deep-Drawing Process for Aluminum/Steel Laminated Sheets [Volume 4, Issue 2, 2017, Pages 169-177]
-
Malek-Mohammadi, Hosein
Free Vibration and Buckling Analyses of Functionally Graded Nanocomposite Plates Reinforced by Carbon Nanotube [Volume 4, Issue 1, 2017, Pages 59-73]
-
Malguri, Akhilesh
Numerical Investigation on Free Vibration Response of Bi-Directional Porous Functionally Graded Circular/Annular Plates [Volume 9, Issue 2, 2022, Pages 243-262]
-
Malguri, Akhilesh
Initial Buckling Behavior of Elastically Supported Rectangular FGM Plate based on Higher Order Shear Deformation Theory via Spline RBF Method [Volume 11, Issue 1, 2024, Pages 59-72]
-
Mallik, Sadek Hossain
Generalized Thermoelastic Interactions Using an Eigenvalue Technique in a Transversely Isotropic Unbounded Medium with Memory Having a Line Heat Source [Volume 11, Issue 2, 2024, Pages 413-424]
-
Manafi, S.A.
The Structural and Mechanical Properties of Al-2.5%wt. B4C Met-al Matrix Nano-composite Fabricated by the Mechanical Alloying [Volume 2, Issue 1, 2015, Pages 39-44]
-
Manafi, S.A.
Effect of Particle Size on the Structural and Mechanical Properties of Al–AlN Nanocomposites Fabricated by Mechanical Alloying [Volume 2, Issue 2, 2015, Pages 73-78]
-
Managheb, Seyyed Amir Mohammad
Nonlocal Buckling and Vibration Analysis of Triple-Walled ZnO Piezoelectric Timoshenko Nano-beam Subjected to Magneto-Electro-Thermo-Mechanical Loadings [Volume 2, Issue 2, 2015, Pages 113-126]
-
Manjunath, Kuchangi Venkatappa
Effect of Chilling & B4C content on Machining Efficiency and Surface Quality in Wire-Cut Machining of Aluminum Matrix Chilled Composites [Volume 11, Issue 2, 2024, Pages 341-350]
-
Marimuthu, Uthayakumar
Optimization of AA6351-SiC-B4C Hybrid Composites in Wire EDM Using Grey Relation Technique [Volume 11, Issue 2, 2024, Pages 385-400]
-
Marimuthu, Uthayakumar
Thrust Force and Delamination Analysis on Redmud-Filled Coconut Sheath Fiber Polyester Composite [Volume 12, Issue 1, 2025, Pages 43-52]
-
Mathivanan, Rajesh
Effect of ON and OFF Axis Open Hole Tensile Testing of GFRP/Epoxy Composites [(Articles in Press)]
-
Maurya, Madan Chandra
Flexural Behaviour of Nanocomposite Plate with CNT Distribution and Agglomeration Effect [Volume 10, Issue 1, 2023, Pages 123-136]
-
Maurya, Madan Chandra
Free Vibration Response of Agglomerated Carbon Nanotube-Reinforced Nanocomposite Plates [Volume 10, Issue 1, 2023, Pages 167-194]
-
Maurya, Madan Chandra
Response of Agglomerated SWCNT Reinforced Nanocomposite Plate under Hygro-Thermal Loading [Volume 11, Issue 1, 2024, Pages 11-40]
-
Mazdak, Siamak
Numerical Optimization of Non-destructive Ultrasonic Testing in Identifying Defects in Composite Structure of Pine Tree Trunk [Volume 11, Issue 1, 2024, Pages 249-258]
-
Mehdianfar, Pejman
Static Buckling and Free Vibration Analysis of Bi-Dimensional FG Metal Ceramic Porous Beam [Volume 11, Issue 1, 2024, Pages 149-158]
-
Mehrabani, Mahboube
Vibration Analysis of Circular Single-Layer Graphene Sheet Using Finite Element Method [Volume 6, Issue 2, 2019, Pages 131-138]
-
M.G.M., Sabri
Green Anticorrosion Coating with Low VOCs Emission using Moringa Oleifera Leaves Extract [Volume 9, Issue 1, 2022, Pages 163-171]
-
Mierzwiński, Dariusz
Optimization of AA6351-SiC-B4C Hybrid Composites in Wire EDM Using Grey Relation Technique [Volume 11, Issue 2, 2024, Pages 385-400]
-
Mirzaee, Omid
A Case Study for Fabrication of MWCNT-TiO2 Hybrid Reinforced Aluminium Matrix Nanocomposites [Volume 1, Issue 2, 2014, Pages 107-111]
-
Mirzaee, Omid
Evaluation of hardness and wear resistance of nano-sized titanium-carbide-reinforced commercially cast aluminum alloy matrices [Volume 5, Issue 1, 2018, Pages 75-81]
-
Mirzaee, Omid
Investigation of Hardness, Morphology and Structural Analysis of NiCrBSi Composite Coating on Plain Carbon Steel [Volume 6, Issue 2, 2019, Pages 75-80]
-
Mirzaei, Jaber
Design and Experimental/Numerical Analysis of Metal-Composite Vessel with Spherical Cap under Internal Pressure [Volume 10, Issue 2, 2023, Pages 247-256]
-
Mirzaei, Jaber
Analyzing and Improving Flexural and Impact Strength of Composites Enhanced with Nanoparticles and Natural Fibers [Volume 11, Issue 2, 2024, Pages 467-482]
-
Mishra, Akshansh
Quantum Machine Learning Approach for the Prediction of Surface Roughness in Additive Manufactured Specimens [(Articles in Press)]
-
Mitra, Anirban
Maximization of Fundamental Frequency of Composite Stiffened Hypar Shell with Cutout by Taguchi Method [Volume 10, Issue 1, 2023, Pages 43-54]
-
Moazzeni, Mostafa
Nonlocal Analysis of Longitudinal Dynamic Behavior of Nanobars with Surface Energy Effect [Volume 6, Issue 2, 2019, Pages 147-158]
-
Modiri, Bahman
Large deformation elastic analysis of pressurized FGM cylindrical shells with Nonlinear Plane Elasticity Theory (NPET) [(Articles in Press)]
-
Mohammad Hosseini Mirzaei, Manouchehr
Thermoelastic Analysis of a Functionally Graded Simple Blade Using First-Order Shear Deformation Theory [Volume 7, Issue 1, 2020, Pages 147-155]
-
Mohammadi, Hassan
Isogeometric Free and Forced Vibration Analyses of FG-CNTs Plates based on a Logarithmic Higher-Order Shear Deformation Theory [Volume 8, Issue 2, 2021, Pages 435-453]
-
Mohammadi Barkchay, Amin
Numerical Analysis of Thermal Buckling of Honeycomb Core Sandwich Panel under Thermal Loading [Volume 10, Issue 2, 2023, Pages 333-342]
-
Mohammadi-Fesharaki, Mohammad
Distribution of Residual Stresses in Polymer Reinforced Carbon Nanotubes and Laminated Carbon Fibers [Volume 4, Issue 1, 2017, Pages 9-18]
-
Mohammadi Hooyeh, H.
Size-dependent Effects on the Vibration Behavior of a Ti-moshenko Microbeam subjected to Pre-stress Loading based on DQM [Volume 3, Issue 2, 2016, Pages 99-112]
-
Mohammadimehr, M.
Size-dependent Effects on the Vibration Behavior of a Ti-moshenko Microbeam subjected to Pre-stress Loading based on DQM [Volume 3, Issue 2, 2016, Pages 99-112]
-
Mohammadimehr, Mehdi
Biaxial Buckling and Bending of Smart Nanocomposite Plate Reinforced by CNTs using Extended Mixture Rule Approach [Volume 1, Issue 1, 2014, Pages 17-26]
-
Mohammadimehr, Mehdi
Nonlocal Buckling and Vibration Analysis of Triple-Walled ZnO Piezoelectric Timoshenko Nano-beam Subjected to Magneto-Electro-Thermo-Mechanical Loadings [Volume 2, Issue 2, 2015, Pages 113-126]
-
Mohammadimehr, Mehdi
Static Bending, Vibration, and Buckling Responses of a Sandwich Beam Composed of Five Layers Considering Honeycomb Core and CNTRC with SMA Particles and Temperature-Dependent Material Properties Using SSDT [(Articles in Press)]
-
Mohammad Panahiha, Hamid
A New Three-Dimensional Refined Higher-Order Theory for Free Vibration Analysis of Composite Circular Cylindrical Shells [Volume 6, Issue 2, 2019, Pages 201-223]
-
Mohammad Panahiha, Hamid
Buckling Analysis of Composite Grid-Stiffened Cylindrical Shells Using a Generalized Equivalent Single Layer Theory [Volume 8, Issue 2, 2021, Pages 455-466]
-
Mohammadrezazadeh, Shahin
Active control of free and forced vibration of rotating laminated composite cylindrical shells embedded with magnetostrictive layers based on classical shell theory [Volume 7, Issue 2, 2020, Pages 355-369]
-
Mohammadrezazadeh, Shahin
Nonlinear Vibration of Rotating Laminated Composite Cross-ply Cylindrical Shell on Nonlinear Rotating Elastic Foundation [Volume 9, Issue 2, 2022, Pages 317-334]
-
Mohammadrezazadeh, Shahin
Vibration of MEE Composite Conical Shell Surrounded by Nonlinear Elastic Foundation Considering the Effect of Geometrical Nonlinearity [Volume 10, Issue 1, 2023, Pages 85-102]
-
Mohammadzadeh Gonabadi, Arash
Improving the Performance of the Sandwich Panel with the Corrugated Core Filled with Metal Foam: Mathematical and Numerical Methods [Volume 6, Issue 2, 2019, Pages 249-261]
-
Mohandes, Masood
Size-dependent Bending of Geometrically Nonlinear of Micro-Laminated Composite Beam based on Modified Couple Stress Theory [Volume 3, Issue 1, 2016, Pages 53-62]
-
Mohandes, Masood
Discrepancies Between Free Vibration of FML and Composite Cylindrical Shells Reinforced by CNTs [Volume 6, Issue 2, 2019, Pages 105-115]
-
Mohsenimonfared, Hamid
Free Vibration Analysis of 2D Functionally Graded Annular Plate considering the Effect of Material Composition via 2D Differential Quadrature Method [Volume 2, Issue 2, 2015, Pages 95-111]
-
Mokhtari, Madhid
An Analytical Approach to Thermoelastic Bending of Simply Supported Advanced Ribbed Composite Plates [Volume 5, Issue 2, 2018, Pages 173-185]
-
Molla, Md Abul Kashim
Generalized Thermoelastic Interactions Using an Eigenvalue Technique in a Transversely Isotropic Unbounded Medium with Memory Having a Line Heat Source [Volume 11, Issue 2, 2024, Pages 413-424]
-
Momeni-Khabisi, Hamed
Mesh-free Dynamic Analyses of FGM Sandwich Plates Resting on A Pasternak Elastic Foundation [Volume 4, Issue 2, 2017, Pages 153-168]
-
Momohjimoh, Ibrahim
Characterization of Thevetia Peruviana (Yellow Oleander) Shell Ash Powder as a Possible Filler in Polymer Composites [Volume 8, Issue 1, 2021, Pages 109-117]
-
Mondal, Samar Chandra
Higher Order Approximations for Bending of FG Beams Using B-Spline Collocation Technique [Volume 11, Issue 1, 2024, Pages 159-176]
-
Montazeri, Amin
Numerical Analysis of Thermal Buckling of Honeycomb Core Sandwich Panel under Thermal Loading [Volume 10, Issue 2, 2023, Pages 333-342]
-
Moradi, Mahdi
Open-Hole Size and Thermal Cycling Effects on Mass Loss and Surface Degradation of Polymer Matrix Composites [Volume 4, Issue 2, 2017, Pages 111-116]
-
Moradi-dastjerdi, Rasool
Free Vibration and Buckling Analyses of Functionally Graded Nanocomposite Plates Reinforced by Carbon Nanotube [Volume 4, Issue 1, 2017, Pages 59-73]
-
Moradi-dastjerdi, Rasool
Mesh-free Dynamic Analyses of FGM Sandwich Plates Resting on A Pasternak Elastic Foundation [Volume 4, Issue 2, 2017, Pages 153-168]
-
Moradi Dastjerdi, R.
Static and Free Vibration Analyses of Functionally Graded Nano-composite Plates Reinforced by Wavy Carbon Nanotubes Resting on a Pasternak Elastic Foundation [Volume 3, Issue 2, 2016, Pages 123-135]
-
Moradkhani, Alireza
The Effect of Al Additive and Arc Melting Time on Synthesis of Ti3SiC2 MAX Phase using Ti/SiC/Al/Graphite [Volume 9, Issue 2, 2022, Pages 367-376]
-
Moradkhani, Alireza
The Effect of Nano-B4C Additive on Microstructure and Mechanical Properties of Pressureless Sintering SiC Bodies [Volume 10, Issue 1, 2023, Pages 29-42]
-
Moravej, M.
Buckling Analysis of Functionally Graded Cylindrical Shells Under Mechanical and Thermal Loads by Dynamic Relaxation Method [Volume 7, Issue 2, 2020, Pages 297-311]
-
Mousavi, Arash
Influence of Different Foaming Conditions on the Mechanical, Physical, and Structural Properties of Polypropylene Foam [Volume 6, Issue 2, 2019, Pages 225-237]
-
Mousavi, Sayed-Farhad
Improving the Performance of Porous Concrete Composites Using Zeolite as a Coarse Grain [Volume 5, Issue 2, 2018, Pages 157-163]
-
Mozafari, M.
Size Effect on the Damaged Areas of Glass/Epoxy Structures under Low Velocity Impact [Volume 1, Issue 2, 2014, Pages 81-85]
-
Mozaffari, A
Low-velocity Impact Response of Viscoelastic Composite Laminates Considering Large Deflection and Higher-order Shear Deformation [Volume 8, Issue 2, 2021, Pages 425-434]
-
Munde, Yashwant
A Comparative Study of Machine Learning Techniques for Predicting Mechanical Properties of Fused Deposition Modelling (FDM)-Based 3D-Printed Wood/PLA Biocomposite [(Articles in Press)]
-
Muneer Ahmed, Zhaib
Experimental Investigation and Simulation of Electro-Mechanical Behaviour of Hybrid Sandwich Composite Radomes for Aerospace Applications [Volume 11, Issue 2, 2024, Pages 401-412]
N
-
N, Ananthi
Modeling and Numerical prediction on mechanical behaviors of hybrid fiber reinforced polymer bio composites using Fuzzy logic algorithm [(Articles in Press)]
-
N, Santhosh
A Comparative Study on the Effect of HNT and Nano-Alumina Particles on the Mechanical Properties of Vacuum Bag Moulded Glass-Epoxy Nanocomposites [Volume 8, Issue 1, 2021, Pages 119-131]
-
Naderi, Ali Asghar
Crashworthiness Study of an Innovative Helmet Liner Composed of an Auxetic Lattice Structure and PU Foam [Volume 9, Issue 1, 2022, Pages 25-35]
-
Naderi, Mahmood
Study of Bond Strength between Polymer-Modified Mortars/Concrete and Their Mechanical Properties using “Friction-Transfer” and “Pull-off” Methods [Volume 8, Issue 1, 2021, Pages 171-184]
-
Naeinzadeh, Hadi
Microstructure, Mechanical and Electrical Properties of Copper Matrix Composites Reinforced with Steel Nanoparticles [Volume 8, Issue 2, 2021, Pages 335-345]
-
Nagaral, Madeva
Mechanical Characterization and Wear Behavior of Nano TiO2 Particulates Reinforced Al7075 Alloy Composites [Volume 7, Issue 1, 2020, Pages 71-78]
-
Nagaral, Madeva
Effect of Ceramic Boron Carbide Particles Addition on the Mechanical and Microstructural Characteristics of Al7020 Alloy Composites [(Articles in Press)]
-
Naga Rani, Mukkala
Free Vibration Analysis of Graphene Reinforced Laminated Composite Plates using Experimental Modal Testing [Volume 10, Issue 2, 2023, Pages 363-374]
-
Nagoriya, Hemant
Exploring Multi-scale Thermal Behaviour in Pin-on-Disc Systems for Organic, Metallic, Ceramic, and Polymer Composites [(Articles in Press)]
-
Naik, Nitin S.
Higher-order Displacement Model for Cylindrical Bending of Laminated and Sandwich Plates Subjected to Environmental Loads [Volume 8, Issue 1, 2021, Pages 185-201]
-
Naik, Tejas Pramod
Design and Development of a Pine Needle Briquetting Machine for the Uttarakhand Region of India [(Articles in Press)]
-
Najafi, M.
Accelerated Heat Aging Study of Phenolic/Basalt Fiber Reinforced Composites [Volume 3, Issue 1, 2016, Pages 1-7]
-
Najafi, Moslem
Environmental Effects on Mechanical Properties of Glass/Epoxy and Fiber Metal Laminates, Part I: Hygrothermal Aging [Volume 4, Issue 3, 2017, Pages 187-196]
-
Najafi, Moslem
Environmental effects on mechanical properties of glass/epoxy and fiber metal laminates, Part II: Isothermal aging [Volume 4, Issue 3, 2017, Pages 197-205]
-
Najafizadeh, Mohammad Mehdi
High-order Analysis of Linear Vibrations of a ModeratleyThick Sandwich Panel With an Electrorheological Core [Volume 7, Issue 2, 2020, Pages 177-188]
-
Najibi, Amir
Numerical Crashworthiness Analysis of Graded Layered Foam- Filled Tubes Under Axial Loading [Volume 6, Issue 1, 2019, Pages 57-64]
-
Narmashiri, Kambiz
Effects of Horizontal Deficiency Location on the Structural Behaviors of Steel SHS Short Columns Strengthened using CFRP [Volume 7, Issue 1, 2020, Pages 39-47]
-
Nasir, Muhammad Ali
Experimental Investigation and Simulation of Electro-Mechanical Behaviour of Hybrid Sandwich Composite Radomes for Aerospace Applications [Volume 11, Issue 2, 2024, Pages 401-412]
-
Nathi, Venkatalakshmi
Free Vibration Analysis of Simply Supported and Clamped Functionally Graded Rectangular Plate Using Coupled Displacement Field Method [(Articles in Press)]
-
Navazi, H. M.
Dynamic Characteristics of Joined Steel and Carbon Fiber-Reinforced Plastic Tubes: Experimental and Numerical Investigation [Volume 4, Issue 2, 2017, Pages 88-97]
-
Nazemizadeh, mostafa
Size-dependent Vibration Analysis of Non-uniform Mass Sensor Nanobeams [Volume 8, Issue 2, 2021, Pages 235-244]
-
Nazemnezhad, Reza
Nonlocal Analysis of Longitudinal Dynamic Behavior of Nanobars with Surface Energy Effect [Volume 6, Issue 2, 2019, Pages 147-158]
-
Nazemnezhad, Reza
A Novel Method for Considering Interlayer Effects between Graphene Nanoribbons and Elastic Medium in Free Vibration Analysis [Volume 7, Issue 1, 2020, Pages 79-88]
-
Nazemnezhad, Reza
Nonlinear Torsional Vibration Analysis of Nanorods in the Presence of Surface Energy Effect: Multi-Mode Galerkin Method [Volume 9, Issue 2, 2022, Pages 229-242]
-
Nazemnezhad, Reza
Longitudinal Vibration of Nanobeams by Two-Phase Local/Nonlocal Elasticity, Rayleigh Theory, and Generalized Differential Quadrature Method [Volume 10, Issue 2, 2023, Pages 221-232]
-
Nazemnezhad, Reza
Nonlinear Torsional Vibration of Size-Dependent Functionally Graded Rods [Volume 11, Issue 1, 2024, Pages 41-58]
-
Nazemnezhad, Reza
A Semi-Analytical Nonlinear Approach for Size-Dependent Analysis of Longitudinal Vibration in Terms of Axially Functionally Graded Nanorods [Volume 11, Issue 2, 2024, Pages 453-466]
-
Nejatbakhsh, Hossein
Parametric Analysis of Position and Direction of Laminated Composite C-Spar on Aeroelastic Flutter in Aircraft Tail [Volume 11, Issue 2, 2024, Pages 351-362]
-
Nejati, Mohammad
Free Vibration Analysis of 2D Functionally Graded Annular Plate considering the Effect of Material Composition via 2D Differential Quadrature Method [Volume 2, Issue 2, 2015, Pages 95-111]
-
Nejati, Mohammad
Frequency Analysis of Functionally Graded Carbon Nanotube-reinforced Cylindrical Panels by Mesh-free Galerkin Method [Volume 8, Issue 2, 2021, Pages 415-424]
-
Netiworaruksa, Benjamas
Mechanical Properties of Hemp Fiber-Reinforced Polypropylene Composites for Drone Propeller Guard Application [(Articles in Press)]
-
Nguyen, Duy Ba
Two-dimensional Elasticity Solutions for Analyzing Free Vibration of Functionally Graded Porous Beams [(Articles in Press)]
-
Nguyen, Thi Hoa
Buckling and Nonlinear Vibration of Functionally Graded Porous Micro-beam Resting on Elastic Foundation [Volume 9, Issue 1, 2022, Pages 75-88]
-
Niknejad, Abbas
Experimental Study on Double-Walled Copper and Carbon/Epoxy Composite Tubes under the Axial Loading [Volume 1, Issue 2, 2014, Pages 71-79]
-
Norouzifard, Vahid
Microstructure, Mechanical and Electrical Properties of Copper Matrix Composites Reinforced with Steel Nanoparticles [Volume 8, Issue 2, 2021, Pages 335-345]
-
Nouri, Mohammad
Cured Poly(ethylene-g-maleic anhydride)/Graphene Nanocomposite: Properties and Characterization [Volume 5, Issue 1, 2018, Pages 1-12]
-
Nouri Damghani, Mohammad
Improving the Performance of the Sandwich Panel with the Corrugated Core Filled with Metal Foam: Mathematical and Numerical Methods [Volume 6, Issue 2, 2019, Pages 249-261]
-
Nouri Niyaraki, Meysam
Design and Experimental/Numerical Analysis of Metal-Composite Vessel with Spherical Cap under Internal Pressure [Volume 10, Issue 2, 2023, Pages 247-256]
-
Nursabrina Mohd Nasir, Amirah
Green Anticorrosion Coating with Low VOCs Emission using Moringa Oleifera Leaves Extract [Volume 9, Issue 1, 2022, Pages 163-171]
O
-
Ohab-Yazdi, Sayed Mohammad Kazem
Application of Bi-Directional Functionally Graded Material Model for Free Vibration Analysis of Rotating Euler-Bernoulli Nanobeams [Volume 8, Issue 2, 2021, Pages 389-399]
-
Okafor, Christian Emeka
The Graft of ANN-FEM Technique in Macro-mechanics of Multi-oriented Natural Fiber/Polyester Laminates [Volume 8, Issue 1, 2021, Pages 51-68]
-
Olad, Ali
A Study of the Effect of TPU and Clay Nanoparticles on the Mechanical Behavior of PBT-Based Nanocomposites [Volume 4, Issue 3, 2017, Pages 179-186]
-
Omidi, Narges
Experimental Investigation of FGM Dental Implant Properties Made from Ti/HA Composite [Volume 4, Issue 3, 2017, Pages 233-237]
-
Omidi Bidgoli, Mostafa
A Case Study on the Influence of Friction Coefficient and Rotational Speed on Transient Thermoelastic Response of FGM Rotating Cylinder [Volume 9, Issue 2, 2022, Pages 399-408]
-
Omrani, Abdollah
Investigation of Capsulated Epoxy and DCPD in Epoxy Based Self-healing Composites - DFT Calculation and Experimental Analysis [Volume 5, Issue 2, 2018, Pages 165-171]
-
Osipova, Victoriy
Effect of the Nature of Oxide Nanofillers on Changes in the Mechanical Properties of Epoxy Coatings under Thermal Cycling [Volume 10, Issue 1, 2023, Pages 195-204]
-
Ouled Ahmed, R.B.A.
Modeling of Hygrothermal Damage of Composite Materials [Volume 3, Issue 2, 2016, Pages 137-144]
-
Ouled Ahmed Ben Ali, Raja
Springback Prediction of Sandwich Panel Using Machine Learning Methods [Volume 10, Issue 1, 2023, Pages 11-20]
P
-
P, Devi
Modeling and Numerical prediction on mechanical behaviors of hybrid fiber reinforced polymer bio composites using Fuzzy logic algorithm [(Articles in Press)]
-
P, Gopi
Complementary Split Ring Resonator-Inspired Antenna for Wearable Multiband Applications Using Biodegradable Polylactic Acid [(Articles in Press)]
-
Pagoli, M.
Analytical Solution for Sound Radiation of Vibrating Circular Plates coupled with Piezo-electric Layers [Volume 3, Issue 2, 2016, Pages 89-98]
-
Pal, Jayantika
Propagation Behavior of Love-Type Waves in a Poro-elastic Medium using Staggered Grid Finite Difference Scheme [Volume 8, Issue 2, 2021, Pages 359-365]
-
Palani, Geetha
Thrust Force and Delamination Analysis on Redmud-Filled Coconut Sheath Fiber Polyester Composite [Volume 12, Issue 1, 2025, Pages 43-52]
-
Palekar, Shailesh P.
XFEM for Fracture Analysis of Centrally Cracked Laminated Plates Subjected to Biaxial Loads [Volume 8, Issue 1, 2021, Pages 213-234]
-
Panahizadeh, Valiollah
The Effect of Nano-B4C Additive on Microstructure and Mechanical Properties of Pressureless Sintering SiC Bodies [Volume 10, Issue 1, 2023, Pages 29-42]
-
Pandey, Ayush
Initial Buckling Behavior of Elastically Supported Rectangular FGM Plate based on Higher Order Shear Deformation Theory via Spline RBF Method [Volume 11, Issue 1, 2024, Pages 59-72]
-
Pandian, Pitchipoo
Studies on Progress of Aluminum Based Composites for Automotive Applications and its Damping Characteristics – A Review [Volume 12, Issue 1, 2025, Pages 25-42]
-
Parhizkar Yaghoobi, Mohammad
Electro-Elastic Analysis of Finite Length FGPM Cylinders Subjected to Electromechanical Loading Using First-Order Electric Potential Theory [Volume 8, Issue 1, 2021, Pages 15-31]
-
Parmar, Vijay
Artificial Neural Network (ANN) Approach to Predict Tensile Properties of Longitudinally Placed Fiber Reinforced Polymeric Composites including Interphase [(Articles in Press)]
-
Patel, Shital
Evaluation of Heat Resistance Characteristics of Fibrous Material for Cold Weather Application [Volume 11, Issue 1, 2024, Pages 231-238]
-
Patil, Santosh S.
Finite Element Analysis of Mechanical Properties of Basalt-Carbon Epoxy Hybrid Laminates [Volume 9, Issue 2, 2022, Pages 263-274]
-
Patil, Vinayak
Evaluation of Heat Resistance Characteristics of Fibrous Material for Cold Weather Application [Volume 11, Issue 1, 2024, Pages 231-238]
-
Paul, Lijo
Multi-response Optimization while Drilling of Composite Laminate with Core Drill by Grey Entropy Fuzzy (GEF) Method [Volume 11, Issue 2, 2024, Pages 483-502]
-
Pavirala, Ritin
Effect of ON and OFF Axis Open Hole Tensile Testing of GFRP/Epoxy Composites [(Articles in Press)]
-
Payganeh, G.
Static and Free Vibration Analyses of Functionally Graded Nano-composite Plates Reinforced by Wavy Carbon Nanotubes Resting on a Pasternak Elastic Foundation [Volume 3, Issue 2, 2016, Pages 123-135]
-
Peiravi, Mohammad Mohsen
3D Numerical Simulation of Fibers Arrangement Effects On Thermal Conductivity of Polymer Matrix Composite [Volume 9, Issue 1, 2022, Pages 59-73]
-
Pendhari, Sandeep Shivram
Functionally Graded Piezoelectric Plates in Cylindrical Bending by Semi-analytical Approach [Volume 9, Issue 2, 2022, Pages 409-424]
-
Pendhari, Sandeep Shivram
Quick Review and Assessment of Thermal Stress Analyses for Exact and Assumed Temperature Distribution for Composite and Sandwich Laminates [Volume 10, Issue 2, 2023, Pages 343-362]
-
Periyasamy, Pitchaipillai
Microstructure & Mechanical Properties Evaluation of Al6082 /AlSi10Mg Composite for Light Weight Structural Applications [Volume 11, Issue 2, 2024, Pages 309-320]
-
Pestov, Aleksandr
Effect of the Nature of Oxide Nanofillers on Changes in the Mechanical Properties of Epoxy Coatings under Thermal Cycling [Volume 10, Issue 1, 2023, Pages 195-204]
-
Piri, Farideh
Synthesis and Characterization Al2O3/Novolac/Fiberglass Nanocomposite: Modification of Thermal Stability and Thermal Insulation Properties [Volume 10, Issue 1, 2023, Pages 21-28]
-
Piri, Farideh
Preparation, Identification, and Evaluation of the Thermal Properties of Novolac Resins Modified with TiO2, MgO, and V2O5 Oxides [Volume 11, Issue 1, 2024, Pages 1-9]
-
Piriyakul, Keeratikan
Enhancement of Compressive Strength in Cement Admixed Bangkok Clay with Glass Fiber and Bottom Ash for Eco-Friendly Functional Road Materials [(Articles in Press)]
-
Pirouzi, Behrooz
Effects of reinforcement distribution on the mechanical properties of Al–Fe3O4 nanocomposites fabricated via accumulative roll bonding [Volume 5, Issue 2, 2018, Pages 131-139]
-
Pitchipoo, Pandian
A Review of Research Outcomes on Fabrication Methods and Investigations for Evaluating Fracture Behavior of Aluminum Metal Matrix Composites with its Applications [Volume 8, Issue 2, 2021, Pages 347-358]
-
Pochalard, Sakol
Enhancement of Compressive Strength in Cement Admixed Bangkok Clay with Glass Fiber and Bottom Ash for Eco-Friendly Functional Road Materials [(Articles in Press)]
-
Pouresmaeeli, Saleh
Buckling Analysis of Spherical Composite Panels Reinforced by Carbon Nanotube [Volume 2, Issue 2, 2015, Pages 135-144]
-
Praburam, G.
Optimization of Wear Behaviour on Mg-TiO2 Nanocomposite Using Taguchi Grey Relational Analysis [Volume 10, Issue 1, 2023, Pages 151-156]
-
Prachumchon, Chayapol
Mechanical Properties of Hemp Fiber-Reinforced Polypropylene Composites for Drone Propeller Guard Application [(Articles in Press)]
-
Pradhan, Atharva A.
Finite Element Analysis of Mechanical Properties of Basalt-Carbon Epoxy Hybrid Laminates [Volume 9, Issue 2, 2022, Pages 263-274]
-
Pradhan, N.
Nonlinear Bending Behavior of Functionally Graded Plates Combined with Active Fiber Composites under Thermal Environment [Volume 8, Issue 2, 2021, Pages 299-308]
-
Pramanik, Abhijit
Analysis of Electrically Shorted and Open Cases on Love Waves Propagating in Piezoelectric Layer Embedded over a Fiber-Reinforced Substrate [Volume 12, Issue 1, 2025, Pages 1-12]
-
Prasad, Ram Bilas
Vibration and Buckling Analysis of Skew Sandwich Plate using Radial Basis Collocation Method [Volume 10, Issue 2, 2023, Pages 383-392]
-
Prasoetsopha, Natkrita
Mechanical Properties of Hemp Fiber-Reinforced Polypropylene Composites for Drone Propeller Guard Application [(Articles in Press)]
Q
-
Qader, Ibrahim Nazem
Multifunctional Properties of Metal Fibers Reinforced Polymer Composites – A Review [Volume 11, Issue 1, 2024, Pages 217-230]
R
-
R, Suresh
A Comparative Study on the Effect of HNT and Nano-Alumina Particles on the Mechanical Properties of Vacuum Bag Moulded Glass-Epoxy Nanocomposites [Volume 8, Issue 1, 2021, Pages 119-131]
-
Rabieyan-Najafabadi, Hamid
Parametric Analysis of Position and Direction of Laminated Composite C-Spar on Aeroelastic Flutter in Aircraft Tail [Volume 11, Issue 2, 2024, Pages 351-362]
-
Rafiee, Roham
Predicting Young’s Modulus of Aggregated Carbon Nanotube Reinforced Polymer [Volume 1, Issue 1, 2014, Pages 9-16]
-
Rafiquzzaman, M.
An Experimental and Numerical Approach of Polymer Composites Based on Jute-Bamboo Natural Fiber [Volume 9, Issue 1, 2022, Pages 105-113]
-
Rahi, Majid
Transverse Vibration for Non-uniform Timoshenko Nano-beams [Volume 2, Issue 1, 2015, Pages 1-16]
-
Rahimi, A.S.
Atomic Simulation of Temperature Effect on the Mechanical Properties of Thin Films [Volume 2, Issue 1, 2015, Pages 31-38]
-
Rahimi, Gholam Hosein
Damage Energy Evaluation in [55/-55]9 Composite Pipes using Acoustic Emission Method [Volume 2, Issue 2, 2015, Pages 127-134]
-
Rahimi, Gholam Hosein
Investigation into The Behavior of Nano-composite Tubes at Ballistic Impact [Volume 4, Issue 3, 2017, Pages 207-210]
-
Rahimi Sharbaf, Hamed
Investigation into The Behavior of Nano-composite Tubes at Ballistic Impact [Volume 4, Issue 3, 2017, Pages 207-210]
-
Rahmani, A.
Experimental Study on Dynamic Behavior of Acrylonitrile-Butadiene-Styrene (ABS) Based Nano Composite Reinforced by Nano Silica Addition [Volume 7, Issue 2, 2020, Pages 313-320]
-
Rahmani, Arash
Vibration Characteristics of Functionally Graded Micro-Beam Carrying an Attached Mass [Volume 7, Issue 1, 2020, Pages 49-58]
-
Rahmani, Hossein
Elastic analysis of Shrink-fitted Thick FGM Cylinders Based on Linear Plane Elasticity Theory [Volume 7, Issue 1, 2020, Pages 121-127]
-
Rahmani, Hossein
Finite Difference Analysis of 2D Stress Wave Propagation in Two Dimensional Functionally Graded Ceramics-Metals Composites [Volume 8, Issue 2, 2021, Pages 321-334]
-
Rajab, Manal z
The Effect of the Solvents on Electrical Properties of POT Conducting Polymer [Volume 8, Issue 2, 2021, Pages 283-289]
-
Rajabizadeh Mirakabad, S.
Static and Free Vibration Analyses of Functionally Graded Nano-composite Plates Reinforced by Wavy Carbon Nanotubes Resting on a Pasternak Elastic Foundation [Volume 3, Issue 2, 2016, Pages 123-135]
-
Rajabpour, Morteza
Compression Analysis of Hollow Cylinder Basalt Continuous Filament Epoxy Composite Filled with Shape Memory Wire [Volume 4, Issue 3, 2017, Pages 225-232]
-
Rajak, Basudeb
Initial Buckling Behavior of Elastically Supported Rectangular FGM Plate based on Higher Order Shear Deformation Theory via Spline RBF Method [Volume 11, Issue 1, 2024, Pages 59-72]
-
Rajakarunakaran, Sivaprakasam
A Review of Research Outcomes on Fabrication Methods and Investigations for Evaluating Fracture Behavior of Aluminum Metal Matrix Composites with its Applications [Volume 8, Issue 2, 2021, Pages 347-358]
-
Rajendran, Sundarakannan
Thrust Force and Delamination Analysis on Redmud-Filled Coconut Sheath Fiber Polyester Composite [Volume 12, Issue 1, 2025, Pages 43-52]
-
Ramana, Maringanti Venkata
Multi-response Optimization while Drilling of Composite Laminate with Core Drill by Grey Entropy Fuzzy (GEF) Method [Volume 11, Issue 2, 2024, Pages 483-502]
-
RATCHAPAKDEE, PONGPUN
Effect of Annealing on Tensile Strength of 3D Printed PLA with Material Extrusion [(Articles in Press)]
-
Rawat, Devi Singh
Integration of Artificial Neural Network and Taguchi Method for Prediction and Minimisation of Thick-Walled Polypropylene Gear Shrinkage [(Articles in Press)]
-
Razavi, Soheil
On the Buckling the Behavior of a Multiphase Smart Plate based on a Higher-order Theory [Volume 4, Issue 1, 2017, Pages 47-58]
-
Razavian Shad, Ehsan
Nonlinear Torsional Vibration of Size-Dependent Functionally Graded Rods [Volume 11, Issue 1, 2024, Pages 41-58]
-
Reddy, B. S.
Comparison of Deflection in Two-Directional Functionally Graded Tapered Beam [Volume 11, Issue 1, 2024, Pages 191-202]
-
Reddy, G. Chandra Mohana
Free Vibration Analysis of 2D Functionally Graded Porous Beams Using Novel Higher-Order Theory [Volume 10, Issue 1, 2023, Pages 69-84]
-
Reddy, G. Chandra Mohana
On Numerical Investigation of Buckling in Two-Directional Porous Functionally Graded Beam Using Higher Order Shear Deformation Theory [Volume 10, Issue 2, 2023, Pages 393-406]
-
Reddy, G. Chandra Mohana
Comparison of Deflection in Two-Directional Functionally Graded Tapered Beam [Volume 11, Issue 1, 2024, Pages 191-202]
-
Reddy, K. V. K.
Comparison of Deflection in Two-Directional Functionally Graded Tapered Beam [Volume 11, Issue 1, 2024, Pages 191-202]
-
Reddy, Mahadeva
Effect of Chilling & B4C content on Machining Efficiency and Surface Quality in Wire-Cut Machining of Aluminum Matrix Chilled Composites [Volume 11, Issue 2, 2024, Pages 341-350]
-
Rexy, J
Vibration in an Electrically Affected Hygro-magneto-thermo-flexo Electric Nanobeam Embedded in Winkler-Pasternak Foundation [Volume 8, Issue 2, 2021, Pages 401-414]
-
Rezaeepazhand, Jalil
Experimental Study on Amine-Functionalized Carbon Nanotubes’ Effect on the Thermomechanical Properties of CNT/Epoxy Nano-composites [Volume 5, Issue 1, 2018, Pages 41-48]
-
Rezaeifar, Omid
Damage Detection in Concrete Filled Tube Columns Based on Experimental Modal Data and Wavelet Technique [Volume 7, Issue 2, 2020, Pages 245-254]
-
Rezaei Qazviniha, Mohsen
Synthesis and Characterization Al2O3/Novolac/Fiberglass Nanocomposite: Modification of Thermal Stability and Thermal Insulation Properties [Volume 10, Issue 1, 2023, Pages 21-28]
-
Rezaei Qazviniha, Mohsen
Preparation, Identification, and Evaluation of the Thermal Properties of Novolac Resins Modified with TiO2, MgO, and V2O5 Oxides [Volume 11, Issue 1, 2024, Pages 1-9]
-
Rezvan Rostami, Reza
Experimental Study on Surface Roughness and Cutting Force in Turning of Al7032 Reinforced with SiC Using Taguchi Design [Volume 8, Issue 1, 2021, Pages 69-76]
-
Rodbumrung, Anurak
Mechanical Properties of Hemp Fiber-Reinforced Polypropylene Composites for Drone Propeller Guard Application [(Articles in Press)]
-
Roghani, Mehran
Mechanical Behavior and Optimization of Functionally Graded Hollow Cylinder with an Elliptic Hole [Volume 7, Issue 2, 2020, Pages 189-201]
-
Ronagh, Hamid-Reza
Dynamic Stiffness Method for Free Vibration of Moderately Thick Functionally Graded Plates [Volume 3, Issue 1, 2016, Pages 15-30]
-
Rostamiyan, Y.
An Analytical Study on Effects of adding Nanoparticles to Water and Enhancement in Thermal Properties Based on Falkner-Skan Model [Volume 1, Issue 1, 2014, Pages 27-35]
-
Rostamiyan, Yasser
Investigation of Buckling Analysis of Epoxy/ Nanoclay/ Carbon Fiber Hybrid Laminated Nanocomposite: Using VARTM Technique for Preparation [Volume 3, Issue 1, 2016, Pages 63-71]
-
Rostamiyan, Yasser
Improving Mechanical Properties of Nanocomposite-based Epoxy by High-impact Polystyrene and Multiwalled Carbon Nanotubes: Optimizing by a Mixture Design Approach [Volume 4, Issue 1, 2017, Pages 33-45]
-
Rostamiyan, Yasser
Study on Compression and Flexural Behavior of ABS-SiO2 Poly-mer Matrix Composite Fabricated by Hot Extrusion [Volume 6, Issue 2, 2019, Pages 239-247]
-
Rostamiyan, Yasser
Experimental Study on Dynamic Behavior of Acrylonitrile-Butadiene-Styrene (ABS) Based Nano Composite Reinforced by Nano Silica Addition [Volume 7, Issue 2, 2020, Pages 313-320]
-
Rostamiyan, Yasser
Analytical and Numerical Solution of Heat Transfer Equation in Rectangular Composite Fins [Volume 9, Issue 1, 2022, Pages 199-211]
-
Rousta-Navi, Borhan
Biaxial Buckling and Bending of Smart Nanocomposite Plate Reinforced by CNTs using Extended Mixture Rule Approach [Volume 1, Issue 1, 2014, Pages 17-26]
-
Roychowdhury, Suparna
Analysis of Electrically Shorted and Open Cases on Love Waves Propagating in Piezoelectric Layer Embedded over a Fiber-Reinforced Substrate [Volume 12, Issue 1, 2025, Pages 1-12]
-
Rudianto, Haris
Metallurgical Assessment of Graphite Reinforced Al-Cu-Mg Nanocomposites Produced by the Shaker Mill Method [Volume 10, Issue 1, 2023, Pages 103-110]
S
-
S, Deepthy G
S-Parameter Analysis of Three-Layered Aperture Coupled Antenna with a Flame Retardant-4 Composite Material as Substrate for Biomedical Applications [(Articles in Press)]
-
S, Hariharan
Complementary Split Ring Resonator-Inspired Antenna for Wearable Multiband Applications Using Biodegradable Polylactic Acid [(Articles in Press)]
-
S, saranya
Complementary Split Ring Resonator-Inspired Antenna for Wearable Multiband Applications Using Biodegradable Polylactic Acid [(Articles in Press)]
-
S, Saranya
Design and Analysis of Complementary Split Ring Resonator Based Low Profile Antenna Using Lightweight Polymers for Wireless, Radar, and Satellite Communication [(Articles in Press)]
-
S, Sathiyamurthy
Modeling and Numerical prediction on mechanical behaviors of hybrid fiber reinforced polymer bio composites using Fuzzy logic algorithm [(Articles in Press)]
-
Saadatfar, Mahdi
Transient Solution of Heat and Moisture Transfer in a Functionally Graded Hollow Cylinder with Finite Length [Volume 9, Issue 1, 2022, Pages 49-57]
-
Saadatmand, Hossein
Damage Energy Evaluation in [55/-55]9 Composite Pipes using Acoustic Emission Method [Volume 2, Issue 2, 2015, Pages 127-134]
-
Saberi Varzaneh, Ali
Study of Bond Strength between Polymer-Modified Mortars/Concrete and Their Mechanical Properties using “Friction-Transfer” and “Pull-off” Methods [Volume 8, Issue 1, 2021, Pages 171-184]
-
Sadeghian, M.
Buckling Analysis of Functionally Graded Cylindrical Shells Under Mechanical and Thermal Loads by Dynamic Relaxation Method [Volume 7, Issue 2, 2020, Pages 297-311]
-
Sadeghian, Mostafa
Experimental and Numerical Study on the Strength of Repaired Steel Pipes with Composite Patches under Internal Pressure [Volume 10, Issue 2, 2023, Pages 437-448]
-
Sadeghinezhad, M. S.
Thermoelastic Analysis of Compressor Spool in Turbojet Engine and Redesign it Using Functionally Graded Materials with Opti-mal Coefficients [Volume 6, Issue 2, 2019, Pages 167-179]
-
Sadeghzadeh, Sadegh
Study of Laminated Composite MEMS and NEMS Performance in Nano Metric Operations [Volume 4, Issue 1, 2017, Pages 19-31]
-
Sadeghzadeh, Sadegh
Geometric Effects on Nanopore Creation in Graphene and on the Impact-withstanding Efficiency of Graphene Nanosheets [Volume 5, Issue 1, 2018, Pages 91-102]
-
Sadeghzadeh, Sadegh
Sensitivity Analysis of Fiber-Reinforced Lamina Micro-Electro-Mechanical Switches with Nonlinear Vibration Using a Higher Order Hamiltonian Approach [Volume 5, Issue 1, 2018, Pages 25-39]
-
Sadeghzadeh, Sadegh
Vibration Analysis of Circular Single-Layer Graphene Sheet Using Finite Element Method [Volume 6, Issue 2, 2019, Pages 131-138]
-
Sadr, Mohammad Homayoun
Vibration Optimization of Fiber-Metal Laminated Composite Shallow Shell Panels Using an Adaptive PSO Algorithm [Volume 4, Issue 2, 2017, Pages 99-110]
-
Safarabadi, Majid
Numerical Analysis of Thermal Buckling of Honeycomb Core Sandwich Panel under Thermal Loading [Volume 10, Issue 2, 2023, Pages 333-342]
-
Safari, Mehrdad
Stress Analysis of FGM Rotating Disk Subjected to Mechanical and Thermal Loads In Aircraft Gas Turbine Engine [Volume 7, Issue 1, 2020, Pages 1-13]
-
Safari Naderi, Mohammad Hadi
Delamination Analysis in Composite Root of a Carbon-Layer Reinforced Wind Turbine Blade [Volume 6, Issue 1, 2019, Pages 9-18]
-
Saffari, Hadi
Size-dependent Vibration Analysis of Non-uniform Mass Sensor Nanobeams [Volume 8, Issue 2, 2021, Pages 235-244]
-
Sahoo, Sarmila
Maximization of Fundamental Frequency of Composite Stiffened Hypar Shell with Cutout by Taguchi Method [Volume 10, Issue 1, 2023, Pages 43-54]
-
Sahu, Rakesh Kumar
Thermo–Elastic Stresses and Deformation Analysis of FG Rotating Hollow Spherical Body [Volume 9, Issue 1, 2022, Pages 125-136]
-
Saini, Kuldeep
Active Vibration Control of Laminated Composite Beam Operating in Thermal Environment using PZT-5H Patches [Volume 9, Issue 2, 2022, Pages 387-398]
-
Sakiani, Hassan
The Role of Natural Additives on the Wear and Friction Proper-ties of Nanocomposites for Friction Applications [Volume 6, Issue 2, 2019, Pages 159-165]
-
Salarkia, M.R.
Size-dependent Effects on the Vibration Behavior of a Ti-moshenko Microbeam subjected to Pre-stress Loading based on DQM [Volume 3, Issue 2, 2016, Pages 99-112]
-
Salehi, Hamid Reza
In Situ Formation of SiC/CNT Ceramic Nanocomposite by Phenolic Pyrolysis [Volume 1, Issue 2, 2014, Pages 87-96]
-
Salehi, Manouchehr
In Situ Formation of SiC/CNT Ceramic Nanocomposite by Phenolic Pyrolysis [Volume 1, Issue 2, 2014, Pages 87-96]
-
Salehi Kolahi, Mohammad Reza
Elastic analysis of Shrink-fitted Thick FGM Cylinders Based on Linear Plane Elasticity Theory [Volume 7, Issue 1, 2020, Pages 121-127]
-
Salhi, Madiha
Thermomechanical and Physical Properties of Plaster Concrete Reinforced with Natural Fibers [Volume 10, Issue 2, 2023, Pages 295-308]
-
Salmaniannezhad, Hassan
Synthesis and Characterization of MgF2/Cu Coating on Aluminum Produced by Sputtering Technique [Volume 9, Issue 2, 2022, Pages 297-302]
-
Salmaniannezhad, Hossein
Synthesis and Characterization of MgF2/Cu Coating on Aluminum Produced by Sputtering Technique [Volume 9, Issue 2, 2022, Pages 297-302]
-
Samawati, Sadi
Transient Thermal Stresses Analysis in a FPGM Cylinder [Volume 6, Issue 2, 2019, Pages 81-94]
-
Sanyal, Shubhashis
An Investigation of Stress and Deformation Behavior of Functionally Graded Timoshenko Beams subjected to Thermo-Mechanical Load [Volume 7, Issue 1, 2020, Pages 157-176]
-
Sarangi, Saroj Kumar
Nonlinear Bending Behavior of Functionally Graded Plates Combined with Active Fiber Composites under Thermal Environment [Volume 8, Issue 2, 2021, Pages 299-308]
-
Saranraj, R.
Optimization of Wear Behaviour on Mg-TiO2 Nanocomposite Using Taguchi Grey Relational Analysis [Volume 10, Issue 1, 2023, Pages 151-156]
-
Sarkar, Susenjit
Higher Order Approximations for Bending of FG Beams Using B-Spline Collocation Technique [Volume 11, Issue 1, 2024, Pages 159-176]
-
Savvafi, Saboor
Investigation of Free Vibration in Fluid-Loaded Cylindrical Shells with a Three-Layer Sandwich Wall and an Auxetic Central Layer [Volume 12, Issue 1, 2025, Pages 53-72]
-
Sawarkar, Sameer Subhash
Functionally Graded Piezoelectric Plates in Cylindrical Bending by Semi-analytical Approach [Volume 9, Issue 2, 2022, Pages 409-424]
-
Sayar, Hassan
Health Monitoring for Composite under Low-Cycle Cyclic Loading, Considering Effects of Acoustic Emission Sensor Type [Volume 6, Issue 1, 2019, Pages 19-26]
-
Sayyad, Atteshamuddin S.
A Quasi-3D Polynomial Shear and Normal Deformation Theory for Laminated Composite, Sandwich, and Functionally Graded Beams [Volume 4, Issue 2, 2017, Pages 139-152]
-
Sayyad, Atteshamuddin S.
Bending, buckling and free vibration responses of hyperbolic shear deformable FGM beams [Volume 5, Issue 1, 2018, Pages 13-24]
-
Sayyad, Atteshamuddin S.
Higher-order Displacement Model for Cylindrical Bending of Laminated and Sandwich Plates Subjected to Environmental Loads [Volume 8, Issue 1, 2021, Pages 185-201]
-
Sayyad, Atteshamuddin S.
A New Higher-Order Shear and Normal Deformation Theory for the Free Vibration Analysis of Laminated Shells [Volume 9, Issue 1, 2022, Pages 89-104]
-
Sayyad, Atteshamuddin S.
Static Flexure of Soft Core Sandwich Beams using Trigonometric Shear Deformation Theory [Volume 2, Issue 1, 2015, Pages 45-53]
-
Sedighi, Mohammad
Experimental Investigation of FGM Dental Implant Properties Made from Ti/HA Composite [Volume 4, Issue 3, 2017, Pages 233-237]
-
Selahi, Ehsan
Semi Analytical Transient Dynamic Analysis of Composite Adhesive Single-lap Joints [Volume 7, Issue 1, 2020, Pages 137-145]
-
Selvamani, R.
Assessment of Hydrostatic Stress and Thermo Piezoelectricity in a Laminated Multilayered Rotating Hollow Cylinder [Volume 8, Issue 1, 2021, Pages 77-86]
-
Selvamani, Rajendran
Vibration in an Electrically Affected Hygro-magneto-thermo-flexo Electric Nanobeam Embedded in Winkler-Pasternak Foundation [Volume 8, Issue 2, 2021, Pages 401-414]
-
Seth, Tanmoy
Generalized Thermoelastic Interactions Using an Eigenvalue Technique in a Transversely Isotropic Unbounded Medium with Memory Having a Line Heat Source [Volume 11, Issue 2, 2024, Pages 413-424]
-
Seyedraoufi, Seyedmahdi
Simulation and Optimization of Fatigue Life of Carbon-Epoxy Composite Sub Frame [Volume 9, Issue 1, 2022, Pages 37-47]
-
Shabani, Yasin
Buckling Analysis of Sandwich Structures with Metamaterials Core Integrated by Graphene Nanoplatelets Reinforced Polymer Composite [Volume 10, Issue 1, 2023, Pages 1-10]
-
Shabani, Yasin
Static Buckling and Free Vibration Analysis of Bi-Dimensional FG Metal Ceramic Porous Beam [Volume 11, Issue 1, 2024, Pages 149-158]
-
Shabani Ammari, Amin
Effects of Horizontal Deficiency Location on the Structural Behaviors of Steel SHS Short Columns Strengthened using CFRP [Volume 7, Issue 1, 2020, Pages 39-47]
-
Shafaee Fallah, Azita
Experimental and Numerical Study on the Strength of Repaired Steel Pipes with Composite Patches under Internal Pressure [Volume 10, Issue 2, 2023, Pages 437-448]
-
Shahbazi Karami, Javad
An Investigation on Three-Point Bending of Foam-Filled Double Tubes and Parameter Optimization Using Response Surface Methodology [Volume 8, Issue 1, 2021, Pages 41-50]
-
Shahnazari, Mohammad Reza
Capillary Effects on Surface Enhancement in a Non-Homogeneous Fibrous Porous Medium [Volume 5, Issue 1, 2018, Pages 83-90]
-
Shahrabi, A.
Flexural Behavior of Fiber–Metal Laminates Reinforced with Surface-Functionalized Nanoclay [Volume 5, Issue 2, 2018, Pages 149-156]
-
Shahravi, Morteza
An Analytical Approach to Thermoelastic Bending of Simply Supported Advanced Ribbed Composite Plates [Volume 5, Issue 2, 2018, Pages 173-185]
-
Shahriari, Behrooz
Thermoelastic Analysis of Compressor Spool in Turbojet Engine and Redesign it Using Functionally Graded Materials with Opti-mal Coefficients [Volume 6, Issue 2, 2019, Pages 167-179]
-
Shahriari, Behrooz
Stress Analysis of FGM Rotating Disk Subjected to Mechanical and Thermal Loads In Aircraft Gas Turbine Engine [Volume 7, Issue 1, 2020, Pages 1-13]
-
Shahriari, Behrooz
Stress Analysis of the Rotating Carbon-Carbon Composite Disk of an Axial Compressor [Volume 10, Issue 2, 2023, Pages 271-282]
-
Shahryari, Mehran
Numerical Analysis of Thermal Buckling of Honeycomb Core Sandwich Panel under Thermal Loading [Volume 10, Issue 2, 2023, Pages 333-342]
-
Shahsavari, Milad
Numerical Investigation on Thermal Post-buckling Of Annular Sector Plates Made of FGM Via 3D Finite Element Method [Volume 8, Issue 2, 2021, Pages 309-320]
-
Shaikh, Asad A.
Finite Element Analysis of Mechanical Properties of Basalt-Carbon Epoxy Hybrid Laminates [Volume 9, Issue 2, 2022, Pages 263-274]
-
Shakooeea, F.
Synthesis and Characterization of Polymer/Nanosilicagel Nano-composites [Volume 4, Issue 1, 2017, Pages 1-8]
-
Shakouri, M.
Dynamic Characteristics of Joined Steel and Carbon Fiber-Reinforced Plastic Tubes: Experimental and Numerical Investigation [Volume 4, Issue 2, 2017, Pages 88-97]
-
Shankara Reddy, R.
Experimental and Numerical Analysis of Woven Bamboo and Jute Fiber Reinforced in Epoxy Composites [Volume 11, Issue 1, 2024, Pages 103-118]
-
Shanmugam, Suresh Kumar
Optimization of AA6351-SiC-B4C Hybrid Composites in Wire EDM Using Grey Relation Technique [Volume 11, Issue 2, 2024, Pages 385-400]
-
Shanmugam, Vigneshwaran
Thrust Force and Delamination Analysis on Redmud-Filled Coconut Sheath Fiber Polyester Composite [Volume 12, Issue 1, 2025, Pages 43-52]
-
Shariati, Mahmoud
Experimental Study on Amine-Functionalized Carbon Nanotubes’ Effect on the Thermomechanical Properties of CNT/Epoxy Nano-composites [Volume 5, Issue 1, 2018, Pages 41-48]
-
Shariati-Nia, Mostafa
Modal Characteristics of Composite Beams with Single Delamination- A Simple Analytical Technique [Volume 1, Issue 2, 2014, Pages 97-106]
-
Sharifzadeh, Fatemeh
Mechanical and Physical Properties of Glass-Fiber Reinforced Polymer Rods Manufactured by Different Pultrusion Methods [Volume 8, Issue 1, 2021, Pages 99-107]
-
Shariyat, Mohammad
The Effects of the Moving Load and the Attached Mass-Spring-Damper System Interactions on the Dynamic Responses of the Composite Plates: An Analytical Approach [Volume 2, Issue 1, 2015, Pages 17-30]
-
Sharma, Apurbba Kumar
Design and Development of a Pine Needle Briquetting Machine for the Uttarakhand Region of India [(Articles in Press)]
-
Sharma, Harish Kumar
Initial Buckling Behavior of Elastically Supported Rectangular FGM Plate based on Higher Order Shear Deformation Theory via Spline RBF Method [Volume 11, Issue 1, 2024, Pages 59-72]
-
Sharma, Ramesh
Influence of Kevlar on Impact Damage Assessment of Carbon Fibre Hybrid Composite Laminate [(Articles in Press)]
-
Sheakholeslami, Mohammadreza
Numerical Optimization of Non-destructive Ultrasonic Testing in Identifying Defects in Composite Structure of Pine Tree Trunk [Volume 11, Issue 1, 2024, Pages 249-258]
-
Sheikhi Azqandi, Mojtaba
A Novel Hybrid Genetic Modified Colliding Bodies Optimization for Designing of Composite Laminates [Volume 8, Issue 1, 2021, Pages 203-212]
-
Shelesh-Nezhad, Karim
A Study of the Effect of TPU and Clay Nanoparticles on the Mechanical Behavior of PBT-Based Nanocomposites [Volume 4, Issue 3, 2017, Pages 179-186]
-
Shelesh-Nezhad, Karim
Numerical Simulation of a Hybrid Nanocomposite Containing Ca-CO3 and Short Glass Fibers Subjected to Tensile Loading [Volume 4, Issue 2, 2017, Pages 117-125]
-
Sheorey, Tanuja
Integration of Artificial Neural Network and Taguchi Method for Prediction and Minimisation of Thick-Walled Polypropylene Gear Shrinkage [(Articles in Press)]
-
Shinde, Bharti M.
A Quasi-3D Polynomial Shear and Normal Deformation Theory for Laminated Composite, Sandwich, and Functionally Graded Beams [Volume 4, Issue 2, 2017, Pages 139-152]
-
Shinde, Bharti M.
A New Higher-Order Shear and Normal Deformation Theory for the Free Vibration Analysis of Laminated Shells [Volume 9, Issue 1, 2022, Pages 89-104]
-
Shirdel, Hadi
Optimization of Hybrid Composite Laminate Based on the Frequency using Imperialist Competitive Algorithm [Volume 1, Issue 1, 2014, Pages 37-48]
-
Shivaprasad, Veena
Mechanical Characterization and Wear Behavior of Nano TiO2 Particulates Reinforced Al7075 Alloy Composites [Volume 7, Issue 1, 2020, Pages 71-78]
-
Shojaei, Keyvan
Stress Analysis of the Rotating Carbon-Carbon Composite Disk of an Axial Compressor [Volume 10, Issue 2, 2023, Pages 271-282]
-
Shokrgozar, Mohammadreza
Low-velocity Impact Response of Viscoelastic Composite Laminates Considering Large Deflection and Higher-order Shear Deformation [Volume 8, Issue 2, 2021, Pages 425-434]
-
Shokrian, Minoo Dokht
Numerical Simulation of a Hybrid Nanocomposite Containing Ca-CO3 and Short Glass Fibers Subjected to Tensile Loading [Volume 4, Issue 2, 2017, Pages 117-125]
-
Shokrieh, M.
Size Effect on the Damaged Areas of Glass/Epoxy Structures under Low Velocity Impact [Volume 1, Issue 2, 2014, Pages 81-85]
-
Shokrieh, Mahmood Mehrdad
Mechanical Properties of Graphene/Epoxy Nanocomposites under Static and Flexural Fatigue Loadings [Volume 1, Issue 1, 2014, Pages 1-7]
-
Siadati, S.M.H.
Flexural Behavior of Fiber–Metal Laminates Reinforced with Surface-Functionalized Nanoclay [Volume 5, Issue 2, 2018, Pages 149-156]
-
Siahpush, Ali
Size-dependent Electro-Mechanical Vibration Analysis of FGPM Composite Plates using Modified Shear Deformation Theories [Volume 8, Issue 1, 2021, Pages 157-169]
-
Sid Amer, Youcef
Failure Probability Analysis of Composite Pressure Tanks Using Subset Simulation [Volume 11, Issue 2, 2024, Pages 363-374]
-
Siddique, Abu Bakar
Material Mechanical Properties Prediction of Layer with Multidirectional Fiber Ply Reinforced Polymer Matrix Composites [Volume 9, Issue 2, 2022, Pages 221-227]
-
Singh, Dalbir
Influence of Filler Content on the Mechanical, Thermal, Moisture Absorption, and Biodegradability Properties of Bionanocomposite with Cellulosic Fibers Derived from Delonix Regia Fruits [Volume 11, Issue 1, 2024, Pages 73-86]
-
Singh, Harpreet
Integration of Artificial Neural Network and Taguchi Method for Prediction and Minimisation of Thick-Walled Polypropylene Gear Shrinkage [(Articles in Press)]
-
Singh, Inderdeep
Design and Development of a Pine Needle Briquetting Machine for the Uttarakhand Region of India [(Articles in Press)]
-
Singh, Jeeoot
A Meshfree Approach for Bending Analysis of Porous Rectangular FGM Plate Resting on Elastic Foundation [Volume 9, Issue 2, 2022, Pages 303-316]
-
Singh, Jeeoot
Assessment of RBFs Based Meshfree Method for the Vibration Response of FGM Rectangular Plate Using HSDT Model [Volume 10, Issue 1, 2023, Pages 137-150]
-
Singh, Jigyasa
A Meshfree Approach for Bending Analysis of Porous Rectangular FGM Plate Resting on Elastic Foundation [Volume 9, Issue 2, 2022, Pages 303-316]
-
Singh, Jigyasa
Vibration and Buckling Analysis of Skew Sandwich Plate using Radial Basis Collocation Method [Volume 10, Issue 2, 2023, Pages 383-392]
-
Singh, Mukesh
A Meshfree Approach for Bending Analysis of Porous Rectangular FGM Plate Resting on Elastic Foundation [Volume 9, Issue 2, 2022, Pages 303-316]
-
Singh, Rakesh
Polyester/Kota Stone Dust Composite: A Comprehensive Investigation of Mechanical and Sliding Wear Properties [Volume 11, Issue 2, 2024, Pages 375-384]
-
Singhal, Abhinav
Analysis of SH-waves Propagating in Multiferroic Structure with Interfacial Imperfection [Volume 9, Issue 1, 2022, Pages 1-10]
-
Singsang, Witawat
Mechanical Properties of Hemp Fiber-Reinforced Polypropylene Composites for Drone Propeller Guard Application [(Articles in Press)]
-
Sittitanadol, Ing-orn
Mechanical Properties of Hemp Fiber-Reinforced Polypropylene Composites for Drone Propeller Guard Application [(Articles in Press)]
-
Sivaprakasam, Rajakarunakaran
Studies on Progress of Aluminum Based Composites for Automotive Applications and its Damping Characteristics – A Review [Volume 12, Issue 1, 2025, Pages 25-42]
-
Sliman, Jemaa
Thermomechanical and Physical Properties of Plaster Concrete Reinforced with Natural Fibers [Volume 10, Issue 2, 2023, Pages 295-308]
-
S.M., Syaizwadi
Green Anticorrosion Coating with Low VOCs Emission using Moringa Oleifera Leaves Extract [Volume 9, Issue 1, 2022, Pages 163-171]
-
Smirnov, Sergey
Effect of the Nature of Oxide Nanofillers on Changes in the Mechanical Properties of Epoxy Coatings under Thermal Cycling [Volume 10, Issue 1, 2023, Pages 195-204]
-
Smirnova, Evgeniy
Effect of the Nature of Oxide Nanofillers on Changes in the Mechanical Properties of Epoxy Coatings under Thermal Cycling [Volume 10, Issue 1, 2023, Pages 195-204]
-
Sobhani, Manoochehr
Microwave-Assisted Two-Step Sintering of Al/8wt%TiC Composite Prepared by Powder Metallurgy [Volume 8, Issue 2, 2021, Pages 291-298]
-
Sohani, Mohammad Hossein
Large deformation elastic analysis of pressurized FGM cylindrical shells with Nonlinear Plane Elasticity Theory (NPET) [(Articles in Press)]
-
Soheil Shamaee, Mahsa
Minimal Mass and Maximal Buckling Load of Composite Hexagonal-Triangle Grid Structure using FSDT under External Hydrostatic Pressure [Volume 10, Issue 2, 2023, Pages 309-318]
-
Soheil Shamaee, Mahsa
A Comprehensive Comparison between Multi-Objective Optimization Methods for Composite Hexagonal-Triangle Grid Structure using FSDT under External Hydrostatic Pressure [Volume 11, Issue 1, 2024, Pages 177-190]
-
Sohrabi, Habib
Using the Taguchi Method for Experimental and Numerical Investigations on the Square-Cup Deep-Drawing Process for Aluminum/Steel Laminated Sheets [Volume 4, Issue 2, 2017, Pages 169-177]
-
Solanki, Bikram Singh
Integration of Artificial Neural Network and Taguchi Method for Prediction and Minimisation of Thick-Walled Polypropylene Gear Shrinkage [(Articles in Press)]
-
Soleimanian, Sina
Theoretical, numerical, and experimental analyses of free vibrations of glass fiber reinforced polymer plates with central cutouts and free boundaries [Volume 5, Issue 1, 2018, Pages 67-74]
-
Soleimanian, Sina
Thermal Buckling and Thermal Induced free Vibration Analysis of Perforated Composite Plates: a Mathematical Model [Volume 7, Issue 1, 2020, Pages 15-23]
-
Soltani, Masoumeh
Finite Element Modeling for Buckling Analysis of Tapered Axially Functionally Graded Timoshenko Beam on Elastic Foundation [Volume 7, Issue 2, 2020, Pages 203-218]
-
Soltani, Masoumeh
A Novel Approach for Lateral Buckling Assessment of Double Tapered Thin-Walled Laminated Composite I-Beams [Volume 9, Issue 1, 2022, Pages 11-23]
-
Soltani, Masoumeh
Buckling Analysis of Sandwich Timoshenko Nanobeams with AFG Core and Two Metal Face-Sheets [Volume 10, Issue 2, 2023, Pages 319-332]
-
Soltani, Mohammad-Reza
Dynamic Stiffness Method for Free Vibration of Moderately Thick Functionally Graded Plates [Volume 3, Issue 1, 2016, Pages 15-30]
-
Soltanimaleki, Arman
Frequency Analysis of Functionally Graded Carbon Nanotube-reinforced Cylindrical Panels by Mesh-free Galerkin Method [Volume 8, Issue 2, 2021, Pages 415-424]
-
Sondhi, Lakshman
Thermo–Elastic Stresses and Deformation Analysis of FG Rotating Hollow Spherical Body [Volume 9, Issue 1, 2022, Pages 125-136]
-
Soroush, Majid
Free Vibration Analysis of Combined Cylindrical-Conical Composite Shells using First-Order Shear Deformation Theory [Volume 8, Issue 2, 2021, Pages 269-282]
-
Srinivasa, Chikkol V.
Experimental and Finite Element Studies on Free Vibration of Areca Leaf Sheath Reinforced Polymer Composites [Volume 8, Issue 2, 2021, Pages 367-388]
-
Srivastava, Manish Chand
Assessment of RBFs Based Meshfree Method for the Vibration Response of FGM Rectangular Plate Using HSDT Model [Volume 10, Issue 1, 2023, Pages 137-150]
-
Srivastava, Yash
Initial Buckling Behavior of Elastically Supported Rectangular FGM Plate based on Higher Order Shear Deformation Theory via Spline RBF Method [Volume 11, Issue 1, 2024, Pages 59-72]
-
Subramanyam, Burlakanti
Microstructure & Mechanical Properties Evaluation of Al6082 /AlSi10Mg Composite for Light Weight Structural Applications [Volume 11, Issue 2, 2024, Pages 309-320]
-
Sultana, Mafruza
Analysis of SH-waves Propagating in Multiferroic Structure with Interfacial Imperfection [Volume 9, Issue 1, 2022, Pages 1-10]
-
Sundaram, Kathiravan
Studies on Progress of Aluminum Based Composites for Automotive Applications and its Damping Characteristics – A Review [Volume 12, Issue 1, 2025, Pages 25-42]
-
Sundaresan, Thirumalai Kumaran
Optimization of AA6351-SiC-B4C Hybrid Composites in Wire EDM Using Grey Relation Technique [Volume 11, Issue 2, 2024, Pages 385-400]
-
Sur, Abhik
Elasto-Thermodiffusive Response in a Two-Dimensional Transversely Isotropic Medium [Volume 6, Issue 2, 2019, Pages 95-104]
-
Sur, Abhik
Thermoelastic Interaction in a Three-Dimensional Layered Sandwich Structure [Volume 5, Issue 2, 2018, Pages 187-198]
-
Swamy, Deepak
Influence of Kevlar on Impact Damage Assessment of Carbon Fibre Hybrid Composite Laminate [(Articles in Press)]
T
-
T, SIVAGANGAI
Experimental Investigation of Repair of Glass Epoxy Composite With Edge And Center Crack By Epoxy Resin [(Articles in Press)]
-
T A, Karthikeyan
S-Parameter Analysis of Three-Layered Aperture Coupled Antenna with a Flame Retardant-4 Composite Material as Substrate for Biomedical Applications [(Articles in Press)]
-
T A, Karthikeyan
Patch antennas with PDMS substrate to detect tumors and their data transmission through ERPO-OFDM modulation technique in VLC [(Articles in Press)]
-
Tabaghi, Armi
Deposition of an Al/SiC Composite Coating on Steel by Friction Surfacing: Corrosion and Wear Properties [Volume 9, Issue 2, 2022, Pages 287-296]
-
Tabatabaeian, Ali
Buckling analysis of FML cylindrical shells under combined axial and torsional loading [Volume 7, Issue 2, 2020, Pages 263-270]
-
Tadi Beni, Yaghub
Frequency Analysis of Functionally Graded Carbon Nanotube-reinforced Cylindrical Panels by Mesh-free Galerkin Method [Volume 8, Issue 2, 2021, Pages 415-424]
-
Taghipoor, Hossein
Analyzing and Improving Flexural and Impact Strength of Composites Enhanced with Nanoparticles and Natural Fibers [Volume 11, Issue 2, 2024, Pages 467-482]
-
Taheri, Moein
Sensitivity Analysis of Vibrating Laminated Composite Rec-tangular Plates in Interaction with Inviscid Fluid Using EFAST Method [Volume 7, Issue 2, 2020, Pages 219-231]
-
Taheri, Moein
Size-dependent Vibration Analysis of Non-uniform Mass Sensor Nanobeams [Volume 8, Issue 2, 2021, Pages 235-244]
-
Taherian, Z.
The Effect of Processing Conditions on the Mechanical Properties of Polypropylene/Mesoporous Silica-Hydroxyapatite Hybrid Nanocomposites [Volume 3, Issue 2, 2016, Pages 73-82]
-
Taheri-Behrooz, F.
Size Effect on the Damaged Areas of Glass/Epoxy Structures under Low Velocity Impact [Volume 1, Issue 2, 2014, Pages 81-85]
-
Tahouneh, Vahid
A Semi-analytical Solution for 3-D Dynamic Analysis of Thick Continuously Graded Carbon Nanotube-reinforced Annular Plates Resting on a Two-parameter Elastic Foundation [Volume 1, Issue 2, 2014, Pages 113-130]
-
Tahouneh, Vahid
Three-dimensional elasticity solution for vibrational analysis of thick continuously graded sandwich plates with different boundary conditions using a two-parameter micromechanical model for agglomeration [Volume 5, Issue 1, 2018, Pages 49-66]
-
Tajali, Mohammad
Synthesis and Characterization of Polymer/Nanosilicagel Nano-composites [Volume 4, Issue 1, 2017, Pages 1-8]
-
Takhayor Ardestani, Masoud
The Effect of Temperature Dependency on the Thermo-Electro-Elastic Analysis of Functionally Graded Piezoelectric Spherical Shell [Volume 6, Issue 1, 2019, Pages 1-8]
-
Talebi, Amir
Microstructure, Mechanical and Electrical Properties of Copper Matrix Composites Reinforced with Steel Nanoparticles [Volume 8, Issue 2, 2021, Pages 335-345]
-
Talebitoot, Roohollah
Simulation and Optimization of Fatigue Life of Carbon-Epoxy Composite Sub Frame [Volume 9, Issue 1, 2022, Pages 37-47]
-
Tarahomi, S.
The Effect of Processing Conditions on the Mechanical Properties of Polypropylene/Mesoporous Silica-Hydroxyapatite Hybrid Nanocomposites [Volume 3, Issue 2, 2016, Pages 73-82]
-
Tavakoli, Hossein
Deposition of an Al/SiC Composite Coating on Steel by Friction Surfacing: Corrosion and Wear Properties [Volume 9, Issue 2, 2022, Pages 287-296]
-
Tee, Kong Fah
Failure Probability Analysis of Composite Pressure Tanks Using Subset Simulation [Volume 11, Issue 2, 2024, Pages 363-374]
-
Thakur, Ajaykumar
Geometrically Nonlinear Analysis of Laminated Composite Plates subjected to Uniform Distributed Load Using a New Hypothesis: the finite element method (FEM) Approach [Volume 7, Issue 2, 2020, Pages 271-285]
-
Thawait, Amit Kumar
Thermo–Elastic Stresses and Deformation Analysis of FG Rotating Hollow Spherical Body [Volume 9, Issue 1, 2022, Pages 125-136]
-
Tizfahm, Akbar
Low-velocity Impact Response of Viscoelastic Composite Laminates Considering Large Deflection and Higher-order Shear Deformation [Volume 8, Issue 2, 2021, Pages 425-434]
-
Torabi, Keivan
Transverse Vibration for Non-uniform Timoshenko Nano-beams [Volume 2, Issue 1, 2015, Pages 1-16]
-
Torabi, Keyvan
Modal Characteristics of Composite Beams with Single Delamination- A Simple Analytical Technique [Volume 1, Issue 2, 2014, Pages 97-106]
-
Torabizadeh, Mohammad Amin
A Numerical and Analytical Solution for the Free Vibration of Laminated Composites Using Different Plate Theories [Volume 4, Issue 1, 2017, Pages 75-87]
-
Torabizadeh, Mohammad Amin
Low-Velocity Impact Behavior of Foam Core Sandwich Panels with Different Face Sheet Layers: Numerical and Experimental Study [Volume 10, Issue 1, 2023, Pages 111-122]
U
-
Usman, Mohammed
Characterization of Thevetia Peruviana (Yellow Oleander) Shell Ash Powder as a Possible Filler in Polymer Composites [Volume 8, Issue 1, 2021, Pages 109-117]
V
-
V, Balaraj
Effect of Ceramic Boron Carbide Particles Addition on the Mechanical and Microstructural Characteristics of Al7020 Alloy Composites [(Articles in Press)]
-
V, Emilda Irudhaya Mari
Design and Analysis of Complementary Split Ring Resonator Based Low Profile Antenna Using Lightweight Polymers for Wireless, Radar, and Satellite Communication [(Articles in Press)]
-
V, Vinoth
Modeling and Numerical prediction on mechanical behaviors of hybrid fiber reinforced polymer bio composites using Fuzzy logic algorithm [(Articles in Press)]
-
V., Murari
Crashworthy Behavior of Plain Weave Glass/Epoxy Composite Tubes Containing Different Extents of Overlap of Dropped Plies [Volume 11, Issue 1, 2024, Pages 87-102]
-
Vaezi, Mehdi
Experimental Investigation on Quasi-Static Impact Response of Glass/Epoxy Composite Corrugated Core Sandwich Panels [Volume 10, Issue 2, 2023, Pages 283-294]
-
Vahabi Meibodi, Mohammad Hossein
Experimental Study of Buckling of Reinforced Conical Composite Shell Under Hydrostatic Loading [Volume 9, Issue 2, 2022, Pages 359-366]
-
Vahedi, Sh.
Flexural Behavior of Fiber–Metal Laminates Reinforced with Surface-Functionalized Nanoclay [Volume 5, Issue 2, 2018, Pages 149-156]
-
Vasara, Dilsukh
Numerical Investigation on Free Vibration Response of Bi-Directional Porous Functionally Graded Circular/Annular Plates [Volume 9, Issue 2, 2022, Pages 243-262]
-
Vashishtha, Govind
Bearing Response Prediction in Hydrothermal Aged Carbon Fiber Reinforced Epoxy Composite Joints using Machine Learning Techniques [(Articles in Press)]
-
Veeramallu, Kalyanamanohar
Experimental Modal Analysis of Viscoelastic Sandwich Structures [(Articles in Press)]
-
Veerasimman, Arumugaprabu
Thrust Force and Delamination Analysis on Redmud-Filled Coconut Sheath Fiber Polyester Composite [Volume 12, Issue 1, 2025, Pages 43-52]
-
Veretennikova, Irina
Effect of the Nature of Oxide Nanofillers on Changes in the Mechanical Properties of Epoxy Coatings under Thermal Cycling [Volume 10, Issue 1, 2023, Pages 195-204]
-
Vijayalakshmi, Anitha
Patch antennas with PDMS substrate to detect tumors and their data transmission through ERPO-OFDM modulation technique in VLC [(Articles in Press)]
-
Visariya, Jainil
Quick Review and Assessment of Thermal Stress Analyses for Exact and Assumed Temperature Distribution for Composite and Sandwich Laminates [Volume 10, Issue 2, 2023, Pages 343-362]
-
Vora, Tanmay
Quick Review and Assessment of Thermal Stress Analyses for Exact and Assumed Temperature Distribution for Composite and Sandwich Laminates [Volume 10, Issue 2, 2023, Pages 343-362]
-
Vossough, Ali Reza
Nonlinear Magneto-Nonlocal Vibration Analysis of Coupled Piezoelectric Micro-Plates Reinforced with Agglomerated CNTs [Volume 7, Issue 1, 2020, Pages 109-119]
-
Vossough, Hossein
Nonlinear Magneto-Nonlocal Vibration Analysis of Coupled Piezoelectric Micro-Plates Reinforced with Agglomerated CNTs [Volume 7, Issue 1, 2020, Pages 109-119]
-
Vyas, Chandreshkumar Jayantilal
Mechanical Characterization of Glass-Basalt Hybrid Composites with Different Fiber Weight Fraction [Volume 11, Issue 2, 2024, Pages 295-308]
W
-
Walter, Janusz
Optimization of AA6351-SiC-B4C Hybrid Composites in Wire EDM Using Grey Relation Technique [Volume 11, Issue 2, 2024, Pages 385-400]
-
W.A.W., Rafizah
Green Anticorrosion Coating with Low VOCs Emission using Moringa Oleifera Leaves Extract [Volume 9, Issue 1, 2022, Pages 163-171]
-
W.M.K.W.M., Ikhmal
Green Anticorrosion Coating with Low VOCs Emission using Moringa Oleifera Leaves Extract [Volume 9, Issue 1, 2022, Pages 163-171]
-
W.N.W.M., Norsani
Green Anticorrosion Coating with Low VOCs Emission using Moringa Oleifera Leaves Extract [Volume 9, Issue 1, 2022, Pages 163-171]
-
Wungsumpow, Chalermpon
Enhancement of Compressive Strength in Cement Admixed Bangkok Clay with Glass Fiber and Bottom Ash for Eco-Friendly Functional Road Materials [(Articles in Press)]
Y
-
Yadav, Jitendra
Thermo-mechanical and wear properties of natural fibre-reinforced epoxy composites for structural applications. [(Articles in Press)]
-
Yang, Yo-Lun
Thrust Force and Delamination Analysis on Redmud-Filled Coconut Sheath Fiber Polyester Composite [Volume 12, Issue 1, 2025, Pages 43-52]
-
Yas, Mohammad Hossein
Dynamic and Buckling Analysis of Hybrid Composite Beam Strengthened with Carbon Fibers/Aramid Fibers under Temperature Gradient [Volume 11, Issue 1, 2024, Pages 203-216]
-
Younesi, Adel
Damage Detection in Concrete Filled Tube Columns Based on Experimental Modal Data and Wavelet Technique [Volume 7, Issue 2, 2020, Pages 245-254]
-
Yousefi, Ali-Akbar
On the Study of Mechanical Properties of Aluminum/Nano-Alumina Composites Produced via Powder Injection Molding [Volume 3, Issue 1, 2016, Pages 45-51]
-
Yousefi, Peyman
High-order Analysis of Linear Vibrations of a ModeratleyThick Sandwich Panel With an Electrorheological Core [Volume 7, Issue 2, 2020, Pages 177-188]
-
Yousefi, Shahram
Thermoelastic Analysis of Compressor Spool in Turbojet Engine and Redesign it Using Functionally Graded Materials with Opti-mal Coefficients [Volume 6, Issue 2, 2019, Pages 167-179]
-
Yousefpoar, Mardali
Synthesis and Characterization of Polymer/Nanosilicagel Nano-composites [Volume 4, Issue 1, 2017, Pages 1-8]
Z
-
Zahedan, Nima
Experimental and Numerical Investigation on the Flexural Behavior of Composite-Reinforced Top-Hat Shape Beam [Volume 8, Issue 1, 2021, Pages 149-156]
-
Zamani, Jamal
Experimental Study of Buckling of Reinforced Conical Composite Shell Under Hydrostatic Loading [Volume 9, Issue 2, 2022, Pages 359-366]
-
Zamani, Mohammad Reza
Theoretical, numerical, and experimental analyses of free vibrations of glass fiber reinforced polymer plates with central cutouts and free boundaries [Volume 5, Issue 1, 2018, Pages 67-74]
-
Zamani, Mohammad Reza
Thermal Buckling and Thermal Induced free Vibration Analysis of Perforated Composite Plates: a Mathematical Model [Volume 7, Issue 1, 2020, Pages 15-23]
-
Zamani, M.R.
Free Vibration of Lattice Cylindrical Composite Shell Reinforced with Carbon Nano-tubes [Volume 2, Issue 1, 2015, Pages 61-72]
-
Zamani, M.R.
The Effect of External Skin on Buckling Strength of Composite Lattice Cylinders Based on Numerical and Experimental Analysis [Volume 3, Issue 2, 2016, Pages 83-87]
-
Zannat, M.
An Experimental and Numerical Approach of Polymer Composites Based on Jute-Bamboo Natural Fiber [Volume 9, Issue 1, 2022, Pages 105-113]
-
Zarei, Hamidreza
Design and Experimental/Numerical Analysis of Metal-Composite Vessel with Spherical Cap under Internal Pressure [Volume 10, Issue 2, 2023, Pages 247-256]
-
Zeighami, Vahid
Buckling Analysis of Nano Composite Plates Based on Combination of the Incremental Load Technique and Dynamic Relaxation Method [Volume 8, Issue 1, 2021, Pages 133-148]
-
Zeighami Salimabad, Mehdi
Numerical Optimization of Non-destructive Ultrasonic Testing in Identifying Defects in Composite Structure of Pine Tree Trunk [Volume 11, Issue 1, 2024, Pages 249-258]
-
Ziadan, K. M.
The Effect of the Solvents on Electrical Properties of POT Conducting Polymer [Volume 8, Issue 2, 2021, Pages 283-289]
-
Zobeid, Sadegh
Investigation of Free Vibration in Fluid-Loaded Cylindrical Shells with a Three-Layer Sandwich Wall and an Auxetic Central Layer [Volume 12, Issue 1, 2025, Pages 53-72]
Your query does not match with any item