Author Index

A

  • Aamir, Muhammad Talha Experimental Investigation and Simulation of Electro-Mechanical Behaviour of Hybrid Sandwich Composite Radomes for Aerospace Applications [Volume 11, Issue 2, 2024, Pages 401-412]
  • Abazadeh, Babak Graphene-based Polymer Nano-composites - A Review [Volume 7, Issue 2, 2020, Pages 333-346]
  • Abbasi, M. An Analytical Study on Effects of adding Nanoparticles to Water and Enhancement in Thermal Properties Based on Falkner-Skan Model [Volume 1, Issue 1, 2014, Pages 27-35]
  • Abboub, Amar Experimental and Numerical Analyses of Alfa/Polyester Composite Under Three-Point Bending [Volume 12, Issue 1, 2025, Pages 211-222]
  • Abdi, Hamid Parametric Investigation of Particle Movements in Ultrasonic Levitation Process Using Piezoelectric Materials [(Articles in Press)]
  • Abdollahpour, Hasan Microwave-Assisted Two-Step Sintering of Al/8wt%TiC Composite Prepared by Powder Metallurgy [Volume 8, Issue 2, 2021, Pages 291-298]
  • Abdollahzadeh, Pouya On the Nonlinear Dynamics of an Energy Harvesting Device Based on Magnetostriction [Volume 8, Issue 1, 2021, Pages 33-40]
  • Abdoos, Hassan On the Study of Mechanical Properties of Aluminum/Nano-Alumina Composites Produced via Powder Injection Molding [Volume 3, Issue 1, 2016, Pages 45-51]
  • Abdoos, Hassan Sintered Steel Composites Reinforced with Ceramic Nanoparticles: Fabrication, Characteristics and Wear Behavior [Volume 6, Issue 2, 2019, Pages 191-200]
  • Abdulkareem, M. T. Mechanical, Crystallographic, and Microstructural Analysis of Polymer Composites Developed from Iron Filings and Polystyrene Wastes [Volume 9, Issue 1, 2022, Pages 137-145]
  • Abdulkareem, S. A. Mechanical, Crystallographic, and Microstructural Analysis of Polymer Composites Developed from Iron Filings and Polystyrene Wastes [Volume 9, Issue 1, 2022, Pages 137-145]
  • Abdullah, َAmir Ultrasonic Assisted Drilling of Carbon Fiber Reinforced Plastic Composites with Non-Rotating Vibratory Tool [Volume 9, Issue 1, 2022, Pages 147-154]
  • Abdullah, Orhan Sabah Investigation of Thermal Fatigue Behavior for HDPE Composites Reinforced by Nano Alumina [Volume 11, Issue 2, 2024, Pages 335-340]
  • Abedini, Vahid Experimental Study on Surface Roughness and Cutting Force in Turning of Al7032 Reinforced with SiC Using Taguchi Design [Volume 8, Issue 1, 2021, Pages 69-76]
  • Abedini, Vahid Tensile and Flexural Properties of 3D-Printed Polylactic Acid/Continuous Carbon Fiber Composite [Volume 10, Issue 2, 2023, Pages 407-418]
  • Adeniyi, A. G. Mechanical, Crystallographic, and Microstructural Analysis of Polymer Composites Developed from Iron Filings and Polystyrene Wastes [Volume 9, Issue 1, 2022, Pages 137-145]
  • Adeniyi, Adedayo Sheriff Characterization of Thevetia Peruviana (Yellow Oleander) Shell Ash Powder as a Possible Filler in Polymer Composites [Volume 8, Issue 1, 2021, Pages 109-117]
  • Afshari, H. Size-dependent Effects on the Vibration Behavior of a Ti-moshenko Microbeam subjected to Pre-stress Loading based on DQM [Volume 3, Issue 2, 2016, Pages 99-112]
  • Afshari, Hassan Transverse Vibration for Non-uniform Timoshenko Nano-beams [Volume 2, Issue 1, 2015, Pages 1-16]
  • Afzali Alvars, Hamed Interfacial Characteristics of Graphene/Polymer Nanocomposites by Molecular Dynamics Simulation and Evaluating Effects of that on Mechanical Properties of Nanocomposites by FEM [Volume 11, Issue 2, 2024, Pages 321-334]
  • Aghadavoudi, Farshid Molecular Dynamics Simulation of Functional and Hybrid Epoxy Based Nanocomposites [Volume 7, Issue 2, 2020, Pages 233-243]
  • Aghajani, F. An Analytical Study on Effects of adding Nanoparticles to Water and Enhancement in Thermal Properties Based on Falkner-Skan Model [Volume 1, Issue 1, 2014, Pages 27-35]
  • Aghayari, Reza Experimental Investigating to Increases the Fire Resistance of the Ultra-High-Performance Concrete by using Hybrid Fibers [Volume 9, Issue 2, 2022, Pages 377-386]
  • Ahmadi, Hamed Experimental and Numerical Investigation on the Flexural Behavior of Composite-Reinforced Top-Hat Shape Beam [Volume 8, Issue 1, 2021, Pages 149-156]
  • Ahmadi, Hamed Crashworthiness Study of an Innovative Helmet Liner Composed of an Auxetic Lattice Structure and PU Foam [Volume 9, Issue 1, 2022, Pages 25-35]
  • Ahmadi, Omid Transient Thermal Stresses Analysis in a FPGM Cylinder [Volume 6, Issue 2, 2019, Pages 81-94]
  • Ahmadvand, Ahmad An Analytical Study on the Indentation of a Layered Composite Beam and its Utilization in Low Velocity Impact Response [Volume 9, Issue 1, 2022, Pages 155-162]
  • Ahmed, Mostaid Analysis of Electrically Shorted and Open Cases on Love Waves Propagating in Piezoelectric Layer Embedded over a Fiber-Reinforced Substrate [Volume 12, Issue 1, 2025, Pages 1-12]
  • Akgul, Yasin Mechanical and Tribological Behaviors of Chopped Carbon/Glass Fiber Reinforced Hybrid Epoxy Composites [Volume 9, Issue 2, 2022, Pages 349-358]
  • Akshaya, Anandakrishnan Propagation of Shear Horizontal Wave at Magneto-Electro-Elastic Structure Subjected to Mechanically Imperfect Interface [Volume 12, Issue 1, 2025, Pages 97-114]
  • Akumalla, Ravi Kiran Active Vibration Control of Laminated Composite Beam Operating in Thermal Environment using PZT-5H Patches [Volume 9, Issue 2, 2022, Pages 387-398]
  • Alaei, Mohammad Hossein Enhancing Strength of Nomex Sandwich Structures through the Utilization of Nano Clay Dispersed Epoxy Resin: A Study in Aerospace Applications [(Articles in Press)]
  • Alalhessabi, S. The Structural and Mechanical Properties of Al-2.5%wt. B4C Met-al Matrix Nano-composite Fabricated by the Mechanical Alloying [Volume 2, Issue 1, 2015, Pages 39-44]
  • Alasvand Zarasvand, Kamran Effects of Nanotube/Matrix Interface on Multi-Walled Carbon Nanotube Reinforced Polymer Mechanical Properties [Volume 4, Issue 3, 2017, Pages 211-223]
  • Alavi, Majid High-order Analysis of Linear Vibrations of a ModeratleyThick Sandwich Panel With an Electrorheological Core [Volume 7, Issue 2, 2020, Pages 177-188]
  • Albooyeh, Alireza Influence of Different Foaming Conditions on the Mechanical, Physical, and Structural Properties of Polypropylene Foam [Volume 6, Issue 2, 2019, Pages 225-237]
  • Albooyeh, A.R. The Effect of Processing Conditions on the Mechanical Properties of Polypropylene/Mesoporous Silica-Hydroxyapatite Hybrid Nanocomposites [Volume 3, Issue 2, 2016, Pages 73-82]
  • Alfiyah, S. Physical and Mechanical Properties of Biodegradable Film from Taro Starch (Xanthosoma Sagittifolium) and Duck Bone Gelatin [Volume 9, Issue 2, 2022, Pages 213-220]
  • Ali, Imran Free Vibration and Buckling Analyses of Nanobeam Embedded in Pasternak Foundation [Volume 10, Issue 2, 2023, Pages 419-436]
  • Alibeigloo, Akbar Elasticity Solution of Functionally Graded Carbon Nanotube Reinforced Composite Cylindrical Panel [Volume 1, Issue 1, 2014, Pages 49-60]
  • Alihemmati, Jaber Frequency Analysis of Functionally Graded Carbon Nanotube-reinforced Cylindrical Panels by Mesh-free Galerkin Method [Volume 8, Issue 2, 2021, Pages 415-424]
  • Alikhani, Hossein Mechanical and Physical Properties of Glass-Fiber Reinforced Polymer Rods Manufactured by Different Pultrusion Methods [Volume 8, Issue 1, 2021, Pages 99-107]
  • Alimirzaei, Sajad Nonlocal Buckling and Vibration Analysis of Triple-Walled ZnO Piezoelectric Timoshenko Nano-beam Subjected to Magneto-Electro-Thermo-Mechanical Loadings [Volume 2, Issue 2, 2015, Pages 113-126]
  • Alinejad, Javad 3D Numerical Simulation of Fibers Arrangement Effects On Thermal Conductivity of Polymer Matrix Composite [Volume 9, Issue 1, 2022, Pages 59-73]
  • Alinezhad, Ahmad Ali Free Vibration Analysis of Size-Dependent Multi-Layered Graphene Sheets Based on Strain Gradient Elasticity Theory [Volume 9, Issue 2, 2022, Pages 275-285]
  • Alizadeh, Mohsen Health Monitoring for Composite under Low-Cycle Cyclic Loading, Considering Effects of Acoustic Emission Sensor Type [Volume 6, Issue 1, 2019, Pages 19-26]
  • Alizadeh, Parisa Numerical Crashworthiness Analysis of Graded Layered Foam- Filled Tubes Under Axial Loading [Volume 6, Issue 1, 2019, Pages 57-64]
  • Alizad-Farzin, Yousef A Case Study for Fabrication of MWCNT-TiO2 Hybrid Reinforced Aluminium Matrix Nanocomposites [Volume 1, Issue 2, 2014, Pages 107-111]
  • Allaee, Mohammad Hossein Experimental and Numerical Investigation of the Effect of Embedding Steel Wires inside the Foam of GFRP/Foam Sandwich Panel under Three-Point Bending Load [Volume 11, Issue 2, 2024, Pages 271-280]
  • Al-Maamori, Mohammed H. Numerical And Analytical Investigation Of Free Vibration Behavior Of Porous Functionally Graded Sandwich Plates [(Articles in Press)]
  • Al-Mwanes, Ammar Oudah Experimental Investigating to Increases the Fire Resistance of the Ultra-High-Performance Concrete by using Hybrid Fibers [Volume 9, Issue 2, 2022, Pages 377-386]
  • Alsbaale, Yousef Alyaas Younes Mechanical and Tribological Behaviors of Chopped Carbon/Glass Fiber Reinforced Hybrid Epoxy Composites [Volume 9, Issue 2, 2022, Pages 349-358]
  • Al-Waily, Muhannad Numerical And Analytical Investigation Of Free Vibration Behavior Of Porous Functionally Graded Sandwich Plates [(Articles in Press)]
  • Amaniyah, M. Physical and Mechanical Properties of Biodegradable Film from Taro Starch (Xanthosoma Sagittifolium) and Duck Bone Gelatin [Volume 9, Issue 2, 2022, Pages 213-220]
  • Amir, Saeed Nonlinear Magneto-Nonlocal Vibration Analysis of Coupled Piezoelectric Micro-Plates Reinforced with Agglomerated CNTs [Volume 7, Issue 1, 2020, Pages 109-119]
  • Amiri, Ali Reza Finite Difference Analysis of 2D Stress Wave Propagation in Two Dimensional Functionally Graded Ceramics-Metals Composites [Volume 8, Issue 2, 2021, Pages 321-334]
  • Amiri, Farzad Experimental and Numerical Investigation of the Effect of Embedding Steel Wires inside the Foam of GFRP/Foam Sandwich Panel under Three-Point Bending Load [Volume 11, Issue 2, 2024, Pages 271-280]
  • Amirjan, Mostafa The Role of Natural Additives on the Wear and Friction Proper-ties of Nanocomposites for Friction Applications [Volume 6, Issue 2, 2019, Pages 159-165]
  • Amoochi, Abbas Numerical Optimization of Non-destructive Ultrasonic Testing in Identifying Defects in Composite Structure of Pine Tree Trunk [Volume 11, Issue 1, 2024, Pages 249-258]
  • Amoochi, Abbas Parametric Investigation of Particle Movements in Ultrasonic Levitation Process Using Piezoelectric Materials [(Articles in Press)]
  • Amosa, M. K. Mechanical, Crystallographic, and Microstructural Analysis of Polymer Composites Developed from Iron Filings and Polystyrene Wastes [Volume 9, Issue 1, 2022, Pages 137-145]
  • Anerao, Prashant A Comparative Study of Machine Learning Techniques for Predicting Mechanical Properties of Fused Deposition Modelling (FDM)-Based 3D-Printed Wood/PLA Biocomposite [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 261-270]
  • Angadi, Shrishail Basappa Effect of Ceramic Boron Carbide Particles Addition on the Mechanical and Microstructural Characteristics of Al7020 Alloy Composites [Volume 12, Issue 1, 2025, Pages 169-180]
  • Ansari, Reza Environmental Effects on Mechanical Properties of Glass/Epoxy and Fiber Metal Laminates, Part I: Hygrothermal Aging [Volume 4, Issue 3, 2017, Pages 187-196]
  • Ansari, Reza Environmental effects on mechanical properties of glass/epoxy and fiber metal laminates, Part II: Isothermal aging [Volume 4, Issue 3, 2017, Pages 197-205]
  • Arab, B. Mechanical Properties of CNT-Reinforced Polymer Nano-composites: A Molecular Dynamics Study [Volume 3, Issue 2, 2016, Pages 113-121]
  • Arab Hasanabade, Majid Strengthening of One-Way Slabs Using Composite Laminates of HPFRCC Including Synthetic Fibers PPS [Volume 9, Issue 1, 2022, Pages 185-197]
  • Arabloo Faraji, Mohammad Javad Vibration Analysis of Sandwich Beams with Magnetorheological Elastomer Core and FGM Graphene Nanoplatelet-Reinforced Polymer Faces on Viscoelastic Foundation [(Articles in Press)]
  • Arabzadeh-Ziari, Erfan Static Bending, Vibration, and Buckling Responses of a Sandwich Beam Composed of Five Layers Considering Honeycomb Core and CNTRC with SMA Particles and Temperature-Dependent Material Properties Using SSDT [Volume 12, Issue 1, 2025, Pages 153-168]
  • Arabzadeh-Ziari, Mohammad Static Bending, Vibration, and Buckling Responses of a Sandwich Beam Composed of Five Layers Considering Honeycomb Core and CNTRC with SMA Particles and Temperature-Dependent Material Properties Using SSDT [Volume 12, Issue 1, 2025, Pages 153-168]
  • Ardebili, Amirreza Enhancing Strength of Nomex Sandwich Structures through the Utilization of Nano Clay Dispersed Epoxy Resin: A Study in Aerospace Applications [(Articles in Press)]
  • Arefi, Mohammad The Effect of Temperature Dependency on the Thermo-Electro-Elastic Analysis of Functionally Graded Piezoelectric Spherical Shell [Volume 6, Issue 1, 2019, Pages 1-8]
  • Arefi, Mohammad Thermoelastic Analysis of a Functionally Graded Simple Blade Using First-Order Shear Deformation Theory [Volume 7, Issue 1, 2020, Pages 147-155]
  • Arora, Gaurav Exploring Multi-Scale Thermal Behaviour in Pin-on-Disc Systems for Organic, Metallic, Ceramic, and Polymer Composites [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 305-317]
  • Arshid, Ehsan Nonlinear Magneto-Nonlocal Vibration Analysis of Coupled Piezoelectric Micro-Plates Reinforced with Agglomerated CNTs [Volume 7, Issue 1, 2020, Pages 109-119]
  • Asanjarani, Ali Free Vibration Analysis of 2D Functionally Graded Annular Plate considering the Effect of Material Composition via 2D Differential Quadrature Method [Volume 2, Issue 2, 2015, Pages 95-111]
  • Asemi, Kamran Numerical Investigation on Thermal Post-buckling Of Annular Sector Plates Made of FGM Via 3D Finite Element Method [Volume 8, Issue 2, 2021, Pages 309-320]
  • Asgari, Masoud Crushing Analysis of Empty and Foam-Filled Cylindrical and Conical Corrugated Composite Tubes [Volume 6, Issue 1, 2019, Pages 35-44]
  • Asgari, Mohsen Static Bending, Vibration, and Buckling Responses of a Sandwich Beam Composed of Five Layers Considering Honeycomb Core and CNTRC with SMA Particles and Temperature-Dependent Material Properties Using SSDT [Volume 12, Issue 1, 2025, Pages 153-168]
  • Asgari, Tahmoores Free Vibrations Analysis of Functionally Graded Rectangular Nano-plates based on Nonlocal Exponential Shear Deformation Theory [Volume 2, Issue 2, 2015, Pages 79-93]
  • Ashok, R. Banagar Experimental and Finite Element Studies on Free Vibration of Areca Leaf Sheath Reinforced Polymer Composites [Volume 8, Issue 2, 2021, Pages 367-388]
  • Ashory, Mohammad Reza Vibration Analysis of Circular Single-Layer Graphene Sheet Using Finite Element Method [Volume 6, Issue 2, 2019, Pages 131-138]
  • Ashrafian, Roozbeh The Effect of Different Weighting Ratios, Length, and Thickness on Weighted Sum of the First Natural Frequency and Critical Buckling Load for a Laminated Composite Circular Cylindrical Shell [Volume 8, Issue 1, 2021, Pages 87-98]
  • Ashrafian, Roozbeh Longitudinal Vibration of Nanobeams by Two-Phase Local/Nonlocal Elasticity, Rayleigh Theory, and Generalized Differential Quadrature Method [Volume 10, Issue 2, 2023, Pages 221-232]
  • Assadi, Abbass Size-dependent Vibration Analysis of Non-uniform Mass Sensor Nanobeams [Volume 8, Issue 2, 2021, Pages 235-244]
  • Auradi, V Mechanical Characterization and Wear Behavior of Nano TiO2 Particulates Reinforced Al7075 Alloy Composites [Volume 7, Issue 1, 2020, Pages 71-78]
  • Auradi, Virupaxi Effect of Ceramic Boron Carbide Particles Addition on the Mechanical and Microstructural Characteristics of Al7020 Alloy Composites [Volume 12, Issue 1, 2025, Pages 169-180]
  • Ayatollahi, M.R. Atomic Simulation of Temperature Effect on the Mechanical Properties of Thin Films [Volume 2, Issue 1, 2015, Pages 31-38]
  • Azadi, Mahboobeh A Comparative Study on the Microstructure and Mechanical Properties of Al-Si-Cu/1wt %NCP Composites after T6 Heat Treatment [Volume 7, Issue 1, 2020, Pages 129-136]
  • Azadi, Mohammad Health Monitoring for Composite under Low-Cycle Cyclic Loading, Considering Effects of Acoustic Emission Sensor Type [Volume 6, Issue 1, 2019, Pages 19-26]
  • Azadi, Mohammad Study of High-cycle Fatigue Properties in Bovine Tibia Bones based on Reliability and Scatter-band Predictions [Volume 7, Issue 2, 2020, Pages 255-261]
  • Azadi, Mohammad Ultrasonic Assisted Drilling of Carbon Fiber Reinforced Plastic Composites with Non-Rotating Vibratory Tool [Volume 9, Issue 1, 2022, Pages 147-154]
  • Azarafza, Reza Theoretical, numerical, and experimental analyses of free vibrations of glass fiber reinforced polymer plates with central cutouts and free boundaries [Volume 5, Issue 1, 2018, Pages 67-74]
  • Azarafza, Reza Investigation of Free Vibration of Laminated Composite Conical Shell with Local Attached Mass [Volume 9, Issue 1, 2022, Pages 173-184]
  • Azhari, Mojtaba Dynamic Stiffness Method for Free Vibration of Moderately Thick Functionally Graded Plates [Volume 3, Issue 1, 2016, Pages 15-30]
  • Azimpour Shishevan, Farzin Graphene-based Polymer Nano-composites - A Review [Volume 7, Issue 2, 2020, Pages 333-346]
  • Azizi, Mohsen Experimental Investigation on Quasi-Static Impact Response of Glass/Epoxy Composite Corrugated Core Sandwich Panels [Volume 10, Issue 2, 2023, Pages 283-294]
  • Azizi, Saber On the Nonlinear Dynamics of an Energy Harvesting Device Based on Magnetostriction [Volume 8, Issue 1, 2021, Pages 33-40]

B

  • Babaei, Alireza Vibration Characteristics of Functionally Graded Micro-Beam Carrying an Attached Mass [Volume 7, Issue 1, 2020, Pages 49-58]
  • Babaei, Masoud Numerical Investigation on Thermal Post-buckling Of Annular Sector Plates Made of FGM Via 3D Finite Element Method [Volume 8, Issue 2, 2021, Pages 309-320]
  • Babu, Jalumedi Multi-response Optimization while Drilling of Composite Laminate with Core Drill by Grey Entropy Fuzzy (GEF) Method [Volume 11, Issue 2, 2024, Pages 483-502]
  • Babu, Karthick Thrust Force and Delamination Analysis on Redmud-Filled Coconut Sheath Fiber Polyester Composite [Volume 12, Issue 1, 2025, Pages 43-52]
  • Babu Loganathan, Sunith Effect of ON and OFF Axis Open Hole Tensile Testing of GFRP/Epoxy Composites [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 319-328]
  • Babu Loganathan, Sunith Influence of Kevlar on Impact Damage Assessment of Carbon Fibre Hybrid Composite Laminate [(Articles in Press)]
  • Baby, Riya Analysis of SH-waves Propagating in Multiferroic Structure with Interfacial Imperfection [Volume 9, Issue 1, 2022, Pages 1-10]
  • Bafandeh Haghighi, Shadan Experimental Analysis of the Effect of Mechanical Topology on the Surface of Biological Microgripper Made of Ionic- Polymer Metal Composite Smart Material [(Articles in Press)]
  • Baghani, Hossein Investigation of Free Vibration of Laminated Composite Conical Shell with Local Attached Mass [Volume 9, Issue 1, 2022, Pages 173-184]
  • Baghbani, Ramin Mesh-free Dynamic Analyses of FGM Sandwich Plates Resting on A Pasternak Elastic Foundation [Volume 4, Issue 2, 2017, Pages 153-168]
  • Bahadorani, Navid Large Deformation Elastic Analysis of Pressurized FGM Thick Cylindrical Shells with Nonlinear Plane Elasticity Theory (NPET) [Volume 12, Issue 1, 2025, Pages 129-140]
  • Baharvandi, Hamidreza The Effect of Al Additive and Arc Melting Time on Synthesis of Ti3SiC2 MAX Phase using Ti/SiC/Al/Graphite [Volume 9, Issue 2, 2022, Pages 367-376]
  • Baharvandi, Hamidreza The Effect of Nano-B4C Additive on Microstructure and Mechanical Properties of Pressureless Sintering SiC Bodies [Volume 10, Issue 1, 2023, Pages 29-42]
  • Bahmanabadi, Hamed Study of High-cycle Fatigue Properties in Bovine Tibia Bones based on Reliability and Scatter-band Predictions [Volume 7, Issue 2, 2020, Pages 255-261]
  • Bahrami, Mohammad Propagation of Matrix Cracking and Induced Delaminatin in Cross-Ply Composite Beams Subjected to Bending Loads [Volume 6, Issue 1, 2019, Pages 45-50]
  • Bakhsheshy, Ali Free Natural Frequency Analysis of an FG Composite Rectangular Plate Coupled with Fluid using Rayleigh–Ritz Method [Volume 1, Issue 2, 2014, Pages 131-143]
  • Bakhshi, Arsalan Study on Compression and Flexural Behavior of ABS-SiO2 Poly-mer Matrix Composite Fabricated by Hot Extrusion [Volume 6, Issue 2, 2019, Pages 239-247]
  • Banerjee, Sanjib Modeling the Buckling Characteristics of Pineapple Leaf Fibre Reinforced Laminated Epoxy Composites [Volume 10, Issue 2, 2023, Pages 233-246]
  • Bangera, Mithil Evaluation of Heat Resistance Characteristics of Fibrous Material for Cold Weather Application [Volume 11, Issue 1, 2024, Pages 231-238]
  • Baroi, Juhi Analysis of SH-waves Propagating in Multiferroic Structure with Interfacial Imperfection [Volume 9, Issue 1, 2022, Pages 1-10]
  • Basati, F. Dynamic and Buckling Analysis of Hybrid Composite Beam Strengthened with Carbon Fibers/Aramid Fibers under Temperature Gradient [Volume 11, Issue 1, 2024, Pages 203-216]
  • Basavaraju, B. Experimental and Finite Element Studies on Free Vibration of Areca Leaf Sheath Reinforced Polymer Composites [Volume 8, Issue 2, 2021, Pages 367-388]
  • Bayat Kazazi, Mahdi Numerical Optimization of Non-destructive Ultrasonic Testing in Identifying Defects in Composite Structure of Pine Tree Trunk [Volume 11, Issue 1, 2024, Pages 249-258]
  • Belkacem, Mokhtar Experimental and Numerical Analyses of Alfa/Polyester Composite Under Three-Point Bending [Volume 12, Issue 1, 2025, Pages 211-222]
  • Benammar, Samir Failure Probability Analysis of Composite Pressure Tanks Using Subset Simulation [Volume 11, Issue 2, 2024, Pages 363-374]
  • Ben Daly, H. Modeling of Hygrothermal Damage of Composite Materials [Volume 3, Issue 2, 2016, Pages 137-144]
  • Benedicta, Jose Design and Analysis of Complementary Split Ring Resonator Based Low Profile Antenna Using Lightweight Polymers for Wireless, Radar, and Satellite Communication [(Articles in Press)]
  • Bharadvaj, Mayank Thermo-Mechanical and Wear Properties of Natural Fiber-Reinforced Epoxy Composites for Structural Applications [Volume 12, Issue 1, 2025, Pages 141-152]
  • Bhaskar, Dhiraj Geometrically Nonlinear Analysis of Laminated Composite Plates subjected to Uniform Distributed Load Using a New Hypothesis: the finite element method (FEM) Approach [Volume 7, Issue 2, 2020, Pages 271-285]
  • Bhowmick, Shubhankar An Investigation of Stress and Deformation Behavior of Functionally Graded Timoshenko Beams subjected to Thermo-Mechanical Load [Volume 7, Issue 1, 2020, Pages 157-176]
  • Bhowmick, Shubhankar Thermo–Elastic Stresses and Deformation Analysis of FG Rotating Hollow Spherical Body [Volume 9, Issue 1, 2022, Pages 125-136]
  • Biradar, Akash Effect of Chilling & B4C content on Machining Efficiency and Surface Quality in Wire-Cut Machining of Aluminum Matrix Chilled Composites [Volume 11, Issue 2, 2024, Pages 341-350]
  • Bishnoi, Kamal Complementary Split Ring Resonator-Inspired Antenna for Wearable Multiband Applications Using Biodegradable Polylactic Acid [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 339-352]
  • Biswas, Amalendu Higher Order Approximations for Bending of FG Beams Using B-Spline Collocation Technique [Volume 11, Issue 1, 2024, Pages 159-176]
  • Bohanon, Brandon Material Mechanical Properties Prediction of Layer with Multidirectional Fiber Ply Reinforced Polymer Matrix Composites [Volume 9, Issue 2, 2022, Pages 221-227]
  • Borah, Partha Pratim Modeling the Buckling Characteristics of Pineapple Leaf Fibre Reinforced Laminated Epoxy Composites [Volume 10, Issue 2, 2023, Pages 233-246]
  • Borhani, E. The Structural and Mechanical Properties of Al-2.5%wt. B4C Met-al Matrix Nano-composite Fabricated by the Mechanical Alloying [Volume 2, Issue 1, 2015, Pages 39-44]
  • Borhani, E. Effect of Particle Size on the Structural and Mechanical Properties of Al–AlN Nanocomposites Fabricated by Mechanical Alloying [Volume 2, Issue 2, 2015, Pages 73-78]
  • Borhani, Ehsan Effects of reinforcement distribution on the mechanical properties of Al–Fe3O4 nanocomposites fabricated via accumulative roll bonding [Volume 5, Issue 2, 2018, Pages 131-139]
  • Bouziane, Mohammed Mokhtar Experimental and Numerical Analyses of Alfa/Polyester Composite Under Three-Point Bending [Volume 12, Issue 1, 2025, Pages 211-222]
  • Bridjesh, P. Comparison of Deflection in Two-Directional Functionally Graded Tapered Beam [Volume 11, Issue 1, 2024, Pages 191-202]
  • Bridjesh, Pappula On Numerical Investigation of Buckling in Two-Directional Porous Functionally Graded Beam Using Higher Order Shear Deformation Theory [Volume 10, Issue 2, 2023, Pages 393-406]

C

  • Chakrabarti, Anupam Flexural Behaviour of Nanocomposite Plate with CNT Distribution and Agglomeration Effect [Volume 10, Issue 1, 2023, Pages 123-136]
  • Chakrabarti, Anupam Free Vibration Response of Agglomerated Carbon Nanotube-Reinforced Nanocomposite Plates [Volume 10, Issue 1, 2023, Pages 167-194]
  • Chakrabarti, Anupam Response of Agglomerated SWCNT Reinforced Nanocomposite Plate under Hygro-Thermal Loading [Volume 11, Issue 1, 2024, Pages 11-40]
  • Chalabi Tehran, Ata A Study of the Effect of TPU and Clay Nanoparticles on the Mechanical Behavior of PBT-Based Nanocomposites [Volume 4, Issue 3, 2017, Pages 179-186]
  • Chalak, H D Buckling Analysis of Functionally Graded Sandwich Beam Based on Third-Order Zigzag Theory [Volume 10, Issue 1, 2023, Pages 55-68]
  • Chatti, S. Modeling of Hygrothermal Damage of Composite Materials [Volume 3, Issue 2, 2016, Pages 137-144]
  • Chatti, Sami Springback Prediction of Sandwich Panel Using Machine Learning Methods [Volume 10, Issue 1, 2023, Pages 11-20]
  • Chaudhary, Vijaykumar Artificial Neural Network (ANN) Approach to Predict Tensile Properties of Longitudinally Placed Fiber Reinforced Polymeric Composites including Interphase [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 353-360]
  • Chaudhuri, Puja Basu Maximization of Fundamental Frequency of Composite Stiffened Hypar Shell with Cutout by Taguchi Method [Volume 10, Issue 1, 2023, Pages 43-54]
  • Chauhan, Shivanku Optimal Replacement of Glass Fabric with Carbon Fabric in Epoxy Matrix Composite [(Articles in Press)]
  • Chauhan, Sumika Bearing Response Prediction in Hydrothermal Aged Carbon Fiber Reinforced Epoxy Composite Joints Using Machine Learning Techniques [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 329-338]
  • Chavan, Yash Evaluation of Heat Resistance Characteristics of Fibrous Material for Cold Weather Application [Volume 11, Issue 1, 2024, Pages 231-238]
  • Chikkanna, Anil Kyathasandra Effect of Chilling & B4C content on Machining Efficiency and Surface Quality in Wire-Cut Machining of Aluminum Matrix Chilled Composites [Volume 11, Issue 2, 2024, Pages 341-350]
  • Chokshi, Sagar Artificial Neural Network (ANN) Approach to Predict Tensile Properties of Longitudinally Placed Fiber Reinforced Polymeric Composites including Interphase [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 353-360]
  • Choopanian Benis, Ali Experimental Investigation on Quasi-Static Impact Response of Glass/Epoxy Composite Corrugated Core Sandwich Panels [Volume 10, Issue 2, 2023, Pages 283-294]
  • Christiyan Kumaravelu Grace Jesu Bai, Jaya Effect of ON and OFF Axis Open Hole Tensile Testing of GFRP/Epoxy Composites [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 319-328]
  • Cinquemani, Simone Parametric Investigation of Particle Movements in Ultrasonic Levitation Process Using Piezoelectric Materials [(Articles in Press)]
  • C M, Ramesha Effect of Nickel Addition on the Coefficient of Thermal Expansion and Microstructural Characteristics of AA2024 and AA7175 Aluminum Alloys in As-Cast and Homogenized States [(Articles in Press)]
  • Cug, Harun Mechanical and Tribological Behaviors of Chopped Carbon/Glass Fiber Reinforced Hybrid Epoxy Composites [Volume 9, Issue 2, 2022, Pages 349-358]

D

  • Damania, Jay A Meshfree Approach for Bending Analysis of Porous Rectangular FGM Plate Resting on Elastic Foundation [Volume 9, Issue 2, 2022, Pages 303-316]
  • Dang, Van Hieu Buckling and Nonlinear Vibration of Functionally Graded Porous Micro-beam Resting on Elastic Foundation [Volume 9, Issue 1, 2022, Pages 75-88]
  • Daniali, M. Dynamic Characteristics of Joined Steel and Carbon Fiber-Reinforced Plastic Tubes: Experimental and Numerical Investigation [Volume 4, Issue 2, 2017, Pages 88-97]
  • Darvizeh, Abolfazl Environmental Effects on Mechanical Properties of Glass/Epoxy and Fiber Metal Laminates, Part I: Hygrothermal Aging [Volume 4, Issue 3, 2017, Pages 187-196]
  • Darvizeh, Abolfazl Environmental effects on mechanical properties of glass/epoxy and fiber metal laminates, Part II: Isothermal aging [Volume 4, Issue 3, 2017, Pages 197-205]
  • Dashtbayazi, M. R. Nonlinear Vibration Analysis of the Composite Cable using Perturbation Method and the Green-Lagrangian Nonlinear Strain [Volume 6, Issue 1, 2019, Pages 27-34]
  • Davar, A. Free Vibration of Lattice Cylindrical Composite Shell Reinforced with Carbon Nano-tubes [Volume 2, Issue 1, 2015, Pages 61-72]
  • Davar, Ali Theoretical, numerical, and experimental analyses of free vibrations of glass fiber reinforced polymer plates with central cutouts and free boundaries [Volume 5, Issue 1, 2018, Pages 67-74]
  • Davar, Ali A New Three-Dimensional Refined Higher-Order Theory for Free Vibration Analysis of Composite Circular Cylindrical Shells [Volume 6, Issue 2, 2019, Pages 201-223]
  • Davar, Ali Thermal Buckling and Thermal Induced free Vibration Analysis of Perforated Composite Plates: a Mathematical Model [Volume 7, Issue 1, 2020, Pages 15-23]
  • Davar, Ali Free Vibration Analysis of Combined Cylindrical-Conical Composite Shells using First-Order Shear Deformation Theory [Volume 8, Issue 2, 2021, Pages 269-282]
  • Davar, Ali Buckling Analysis of Composite Grid-Stiffened Cylindrical Shells Using a Generalized Equivalent Single Layer Theory [Volume 8, Issue 2, 2021, Pages 455-466]
  • Davar, Ali Investigation of Free Vibration of Laminated Composite Conical Shell with Local Attached Mass [Volume 9, Issue 1, 2022, Pages 173-184]
  • Deepthy, G. S. S-Parameter Analysis of Three-Layered Aperture Coupled Antenna with a Flame Retardant-4 Composite Material as Substrate for Biomedical Applications [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 361-369]
  • Dehghani, Davood Parametric Investigation of Particle Movements in Ultrasonic Levitation Process Using Piezoelectric Materials [(Articles in Press)]
  • Dewangan, Rishi Mechanical Properties and Water Absorption of Epoxy Composites Reinforced with Treated Long Hair Fiber for Sustainable Manufacturing [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 379-392]
  • Dhalait, Javed Tensile, Flexural and Impact strength analysis of a 3D printed Carbon Fiber Reinforced Nylon Filament [(Articles in Press)]
  • Dhalait, Javed Lattice Structure Optimization of 3D Printed TPMS under Different Loading Conditions Using Regression Machine Learning [(Articles in Press)]
  • Dhiman, Babita Bearing Response Prediction in Hydrothermal Aged Carbon Fiber Reinforced Epoxy Composite Joints Using Machine Learning Techniques [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 329-338]
  • Doddamani, Saleemsab Effect of Aging on Fracture Toughness of Al6061-Graphite Particulate Composites [Volume 6, Issue 2, 2019, Pages 139-146]
  • Doostmohamadi, Mahsa Improving the Performance of Porous Concrete Composites Using Zeolite as a Coarse Grain [Volume 5, Issue 2, 2018, Pages 157-163]
  • Dwi Kartika, Lintang Metallurgical Assessment of Graphite Reinforced Al-Cu-Mg Nanocomposites Produced by the Shaker Mill Method [Volume 10, Issue 1, 2023, Pages 103-110]
  • Dwitama, Dicky Hartawan Pandanus Tectorius Fiber/ Rice Husk Powder As Green Reinforcement For Lightweight Composites: Evaluation Of Impact Strength Properties And Thermal Stability [(Articles in Press)]
  • Dwivedi, Umesh Kumar Mechanical Properties and Water Absorption of Epoxy Composites Reinforced with Treated Long Hair Fiber for Sustainable Manufacturing [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 379-392]

E

  • Ebrahami, F. Assessment of Hydrostatic Stress and Thermo Piezoelectricity in a Laminated Multilayered Rotating Hollow Cylinder [Volume 8, Issue 1, 2021, Pages 77-86]
  • Ebrahami, Farzad Vibration in an Electrically Affected Hygro-magneto-thermo-flexo Electric Nanobeam Embedded in Winkler-Pasternak Foundation [Volume 8, Issue 2, 2021, Pages 401-414]
  • Ebrahimi, Zohreh Microstructure, Mechanical and Electrical Properties of Copper Matrix Composites Reinforced with Steel Nanoparticles [Volume 8, Issue 2, 2021, Pages 335-345]
  • Eghbali, Mohammadreza On Moving Harmonic Load and Dynamic Response of Carbon Nanotube-Reinforced Composite Beams using Higher-Order Shear Deformation Theories [Volume 10, Issue 2, 2023, Pages 257-270]
  • Ekhteraei Toussi, Hamid Delamination Analysis in Composite Root of a Carbon-Layer Reinforced Wind Turbine Blade [Volume 6, Issue 1, 2019, Pages 9-18]
  • Emami, J. Free Vibration of Lattice Cylindrical Composite Shell Reinforced with Carbon Nano-tubes [Volume 2, Issue 1, 2015, Pages 61-72]
  • Emrahi, Reza Investigation of Buckling Analysis of Epoxy/ Nanoclay/ Carbon Fiber Hybrid Laminated Nanocomposite: Using VARTM Technique for Preparation [Volume 3, Issue 1, 2016, Pages 63-71]
  • Eroglu, Mehmet Multifunctional Properties of Metal Fibers Reinforced Polymer Composites – A Review [Volume 11, Issue 1, 2024, Pages 217-230]
  • Esfandiar, Milad Capillary Effects on Surface Enhancement in a Non-Homogeneous Fibrous Porous Medium [Volume 5, Issue 1, 2018, Pages 83-90]
  • Esfandiari, Akbar Damage Detection in Concrete Filled Tube Columns Based on Experimental Modal Data and Wavelet Technique [Volume 7, Issue 2, 2020, Pages 245-254]
  • Eskandari Jam, J. Free Vibration of Lattice Cylindrical Composite Shell Reinforced with Carbon Nano-tubes [Volume 2, Issue 1, 2015, Pages 61-72]
  • Eskandari Jam, Jafar Theoretical, numerical, and experimental analyses of free vibrations of glass fiber reinforced polymer plates with central cutouts and free boundaries [Volume 5, Issue 1, 2018, Pages 67-74]
  • Eskandari Jam, Jafar Thermal Buckling and Thermal Induced free Vibration Analysis of Perforated Composite Plates: a Mathematical Model [Volume 7, Issue 1, 2020, Pages 15-23]
  • Eskandari Jam, Jafar Free Vibration Analysis of Combined Cylindrical-Conical Composite Shells using First-Order Shear Deformation Theory [Volume 8, Issue 2, 2021, Pages 269-282]
  • Eskandari Jam, Jafar Buckling Analysis of Composite Grid-Stiffened Cylindrical Shells Using a Generalized Equivalent Single Layer Theory [Volume 8, Issue 2, 2021, Pages 455-466]
  • Eskandari Jam, Jafar Experimental and Numerical Investigation of the Effect of Embedding Steel Wires inside the Foam of GFRP/Foam Sandwich Panel under Three-Point Bending Load [Volume 11, Issue 2, 2024, Pages 271-280]
  • Eskandari Jam, Jafar Molecular Dynamic Investigation of Graphene Oxide Presence and Three Experimental Distribution Methods in Reinforced Epoxy-Based Nanocomposites [Volume 12, Issue 1, 2025, Pages 115-128]
  • Eskandari Jam, Jafar Enhancing Strength of Nomex Sandwich Structures through the Utilization of Nano Clay Dispersed Epoxy Resin: A Study in Aerospace Applications [(Articles in Press)]
  • Eskandari-Jam, Jafar A Semi-analytical Solution for 3-D Dynamic Analysis of Thick Continuously Graded Carbon Nanotube-reinforced Annular Plates Resting on a Two-parameter Elastic Foundation [Volume 1, Issue 2, 2014, Pages 113-130]
  • Eskandari Shahraki, Majid Free Vibration Analysis of Combined Cylindrical-Conical Composite Shells using First-Order Shear Deformation Theory [Volume 8, Issue 2, 2021, Pages 269-282]
  • Eskandari Shahraki, Majid Buckling Analysis of Composite Grid-Stiffened Cylindrical Shells Using a Generalized Equivalent Single Layer Theory [Volume 8, Issue 2, 2021, Pages 455-466]
  • Eskandariyan, Fahime Investigation of Nonlinear Behavior of Composite Bracing Structures with Concrete Columns and Steel Beams (RCS) Applying Finite Element Method [Volume 7, Issue 1, 2020, Pages 25-37]
  • Eskandarzadeh, Shahin Influence of Different Foaming Conditions on the Mechanical, Physical, and Structural Properties of Polypropylene Foam [Volume 6, Issue 2, 2019, Pages 225-237]
  • Eslami-Farsani, R. Accelerated Heat Aging Study of Phenolic/Basalt Fiber Reinforced Composites [Volume 3, Issue 1, 2016, Pages 1-7]
  • Eslami-Farsani, R. Investigation of Tensile Characteristics of an Epoxy Matrix Com-posite with Uni-Directional and Hybrid Tissue Natural Hemp Fibers [Volume 6, Issue 2, 2019, Pages 181-190]
  • Esmkhani, Masood Mechanical Properties of Graphene/Epoxy Nanocomposites under Static and Flexural Fatigue Loadings [Volume 1, Issue 1, 2014, Pages 1-7]
  • Eticha, Andinet Kumella Mechanical and Tribological Behaviors of Chopped Carbon/Glass Fiber Reinforced Hybrid Epoxy Composites [Volume 9, Issue 2, 2022, Pages 349-358]

F

  • Falahzade, Sina An Analytical Approach to Thermoelastic Bending of Simply Supported Advanced Ribbed Composite Plates [Volume 5, Issue 2, 2018, Pages 173-185]
  • Fallah, Abolfazl Free Vibrations Analysis of Functionally Graded Rectangular Nano-plates based on Nonlocal Exponential Shear Deformation Theory [Volume 2, Issue 2, 2015, Pages 79-93]
  • Fallah, Abolfazl Free Vibration Analysis of Size-Dependent, Functionally Graded, Rectangular Nano/Micro-plates based on Modified Nonlinear Couple Stress Shear Deformation Plate Theories [Volume 4, Issue 2, 2017, Pages 127-137]
  • Fallah, Famida Non-Linear Analysis of Functionally Graded Sector Plates with Simply Supported Radial Edges Under Transverse Loading [Volume 6, Issue 1, 2019, Pages 65-74]
  • Fallahzadeh Rastehkenar, Sina The Effects of the Moving Load and the Attached Mass-Spring-Damper System Interactions on the Dynamic Responses of the Composite Plates: An Analytical Approach [Volume 2, Issue 1, 2015, Pages 17-30]
  • Farahmandrad, Sahar Nonlinear Torsional Vibration Analysis of Nanorods in the Presence of Surface Energy Effect: Multi-Mode Galerkin Method [Volume 9, Issue 2, 2022, Pages 229-242]
  • Faraji Kalajahi, Pouya A Study of the Effect of TPU and Clay Nanoparticles on the Mechanical Behavior of PBT-Based Nanocomposites [Volume 4, Issue 3, 2017, Pages 179-186]
  • Farhadinia, M. Mechanical Properties of CNT-Reinforced Polymer Nano-composites: A Molecular Dynamics Study [Volume 3, Issue 2, 2016, Pages 113-121]
  • Farhadinia, Mahmood Failure Pressure Prediction of Semi Spherical GFRP Shells in Thermal Environment [Volume 7, Issue 1, 2020, Pages 103-108]
  • Faroughi, Shirko Adaptive Tunable Vibration Absorber using Shape Memory Alloy [Volume 2, Issue 1, 2015, Pages 55-60]
  • Faroughi, Shirko Vibration Characteristics of Functionally Graded Micro-Beam Carrying an Attached Mass [Volume 7, Issue 1, 2020, Pages 49-58]
  • Faroughi, Shirko Size-Dependent Nonlinear Dynamics of a Non-Uniform Piezoelectric Microbeam Based on the Strain Gradient Theory [Volume 7, Issue 2, 2020, Pages 321-331]
  • Farrokhabadi, Amin Damage Energy Evaluation in [55/-55]9 Composite Pipes using Acoustic Emission Method [Volume 2, Issue 2, 2015, Pages 127-134]
  • Farrokhabadi, Amin Propagation of Matrix Cracking and Induced Delaminatin in Cross-Ply Composite Beams Subjected to Bending Loads [Volume 6, Issue 1, 2019, Pages 45-50]
  • Farrokhabadi, Amin Investigation of Vibration Energy Harvesting in Multilayer Composite Plates with Anisotropic Piezoelectric Patches [Volume 12, Issue 1, 2025, Pages 223-234]
  • Farzannasab, Mahshad Study of High-cycle Fatigue Properties in Bovine Tibia Bones based on Reliability and Scatter-band Predictions [Volume 7, Issue 2, 2020, Pages 255-261]
  • Farzin, Saeed Improving the Performance of Porous Concrete Composites Using Zeolite as a Coarse Grain [Volume 5, Issue 2, 2018, Pages 157-163]
  • Fayzulla, Bayan Jabbar Multifunctional Properties of Metal Fibers Reinforced Polymer Composites – A Review [Volume 11, Issue 1, 2024, Pages 217-230]
  • Fazeli, Hamid Molecular Dynamic Investigation of Graphene Oxide Presence and Three Experimental Distribution Methods in Reinforced Epoxy-Based Nanocomposites [Volume 12, Issue 1, 2025, Pages 115-128]
  • Fazelzadeh, S. Ahmad Buckling Analysis of Spherical Composite Panels Reinforced by Carbon Nanotube [Volume 2, Issue 2, 2015, Pages 135-144]
  • Fazilati, Jamshid Dynamic Stability of Moderately Thick Composite Laminated Skew Plates using Finite Strip Method [Volume 2, Issue 2, 2015, Pages 145-150]
  • Fazli, Mostafa Investigation of Capsulated Epoxy and DCPD in Epoxy Based Self-healing Composites - DFT Calculation and Experimental Analysis [Volume 5, Issue 2, 2018, Pages 165-171]
  • Fekih, Sidi Mohamed Experimental and Numerical Analyses of Alfa/Polyester Composite Under Three-Point Bending [Volume 12, Issue 1, 2025, Pages 211-222]
  • Feli, Saeed Analytical Modeling of Functionally Graded Carbon Nanotube-Reinforced Composite Plates under Low-Velocity Impact [Volume 11, Issue 2, 2024, Pages 281-294]
  • Fereidoon, A.B. The Effect of Processing Conditions on the Mechanical Properties of Polypropylene/Mesoporous Silica-Hydroxyapatite Hybrid Nanocomposites [Volume 3, Issue 2, 2016, Pages 73-82]
  • Fereidoon, Abdolhossein Optimization of Hybrid Composite Laminate Based on the Frequency using Imperialist Competitive Algorithm [Volume 1, Issue 1, 2014, Pages 37-48]
  • Fereidoon, Abdolhossein A Numerical and Analytical Solution for the Free Vibration of Laminated Composites Using Different Plate Theories [Volume 4, Issue 1, 2017, Pages 75-87]
  • Fereidoon, Abdoulhossein Low-Velocity Impact Behavior of Foam Core Sandwich Panels with Different Face Sheet Layers: Numerical and Experimental Study [Volume 10, Issue 1, 2023, Pages 111-122]
  • Feyz Sayadian, Ayat Size-Dependent Nonlinear Dynamics of a Non-Uniform Piezoelectric Microbeam Based on the Strain Gradient Theory [Volume 7, Issue 2, 2020, Pages 321-331]
  • Firouzbakht, Vahid Predicting Young’s Modulus of Aggregated Carbon Nanotube Reinforced Polymer [Volume 1, Issue 1, 2014, Pages 9-16]
  • Freidani, Meisam Elasto-dynamic Response Analysis of a Curved Composite Sandwich Beam Subjected to the Loading of a Moving Mass [Volume 7, Issue 2, 2020, Pages 347-354]

G

  • G, Rathnakar A Comparative Study on the Effect of HNT and Nano-Alumina Particles on the Mechanical Properties of Vacuum Bag Moulded Glass-Epoxy Nanocomposites [Volume 8, Issue 1, 2021, Pages 119-131]
  • G, Ravichandran A Comparative Study on the Effect of HNT and Nano-Alumina Particles on the Mechanical Properties of Vacuum Bag Moulded Glass-Epoxy Nanocomposites [Volume 8, Issue 1, 2021, Pages 119-131]
  • Ganesh, Radhakrishnan Optimization of Wear Behaviour on Mg-TiO2 Nanocomposite Using Taguchi Grey Relational Analysis [Volume 10, Issue 1, 2023, Pages 151-156]
  • Gangil, Brijesh Thermo-Mechanical and Wear Properties of Natural Fiber-Reinforced Epoxy Composites for Structural Applications [Volume 12, Issue 1, 2025, Pages 141-152]
  • Geetha, Narayanan Kannaiyan On Numerical Investigation of Buckling in Two-Directional Porous Functionally Graded Beam Using Higher Order Shear Deformation Theory [Volume 10, Issue 2, 2023, Pages 393-406]
  • Ghaderi, Mohammad Reza Numerical Optimization of Non-destructive Ultrasonic Testing in Identifying Defects in Composite Structure of Pine Tree Trunk [Volume 11, Issue 1, 2024, Pages 249-258]
  • Ghadimi, Mojtaba Elastoplastic Analysis of Pressurized FG rotating Thick Cylinders Based on High-Order Shear Deformation Theory and Radial Return Method [Volume 11, Issue 1, 2024, Pages 119-130]
  • Ghadirian, Hossein Free Vibration Analysis of Composite Plates with Artificial Springs by Trigonometric Ritz Method [Volume 1, Issue 1, 2014, Pages 61-70]
  • Ghaemi, Fatemeh Failure Pressure Prediction of Semi Spherical GFRP Shells in Thermal Environment [Volume 7, Issue 1, 2020, Pages 103-108]
  • Ghannad, Mehdi Electro-Elastic Analysis of Finite Length FGPM Cylinders Subjected to Electromechanical Loading Using First-Order Electric Potential Theory [Volume 8, Issue 1, 2021, Pages 15-31]
  • Ghannad, Mehdi Elastoplastic Analysis of Pressurized FG rotating Thick Cylinders Based on High-Order Shear Deformation Theory and Radial Return Method [Volume 11, Issue 1, 2024, Pages 119-130]
  • Ghannad, Mehdi Large Deformation Elastic Analysis of Pressurized FGM Thick Cylindrical Shells with Nonlinear Plane Elasticity Theory (NPET) [Volume 12, Issue 1, 2025, Pages 129-140]
  • Gharaei, Amin Parametric Analysis of Position and Direction of Laminated Composite C-Spar on Aeroelastic Flutter in Aircraft Tail [Volume 11, Issue 2, 2024, Pages 351-362]
  • Ghasemi, Ahmad Reza Distribution of Residual Stresses in Polymer Reinforced Carbon Nanotubes and Laminated Carbon Fibers [Volume 4, Issue 1, 2017, Pages 9-18]
  • Ghasemi, Ahmad Reza Open-Hole Size and Thermal Cycling Effects on Mass Loss and Surface Degradation of Polymer Matrix Composites [Volume 4, Issue 2, 2017, Pages 111-116]
  • Ghasemi, Ahmad Reza Creep Strain and Stress Analysis in Laminated Composite Pres-sure Vessels [Volume 5, Issue 2, 2018, Pages 141-147]
  • Ghasemi, Ahmad Reza Discrepancies Between Free Vibration of FML and Composite Cylindrical Shells Reinforced by CNTs [Volume 6, Issue 2, 2019, Pages 105-115]
  • Ghasemi, Ahmad Reza Effects of Magnetic Field in Creep Behavior of Three-Phase Laminated Composite Cylindrical Shells [Volume 6, Issue 1, 2019, Pages 51-56]
  • Ghasemi, Ahmad Reza Buckling analysis of FML cylindrical shells under combined axial and torsional loading [Volume 7, Issue 2, 2020, Pages 263-270]
  • Ghasemi, Ahmad Reza Thermal Variations of Thermo-Mechanical Loading Effects on Creep Stress and Strain Distribution in Multi-layered Composite Cylinder [Volume 9, Issue 1, 2022, Pages 115-123]
  • Ghasemi, Ahmad Reza Minimal Mass and Maximal Buckling Load of Composite Hexagonal-Triangle Grid Structure using FSDT under External Hydrostatic Pressure [Volume 10, Issue 2, 2023, Pages 309-318]
  • Ghasemi, Ahmad Reza Parametric Analysis of Position and Direction of Laminated Composite C-Spar on Aeroelastic Flutter in Aircraft Tail [Volume 11, Issue 2, 2024, Pages 351-362]
  • Ghasemi, Ahmad-Reza Size-dependent Bending of Geometrically Nonlinear of Micro-Laminated Composite Beam based on Modified Couple Stress Theory [Volume 3, Issue 1, 2016, Pages 53-62]
  • Ghasemi, Behrooz Evaluation of hardness and wear resistance of nano-sized titanium-carbide-reinforced commercially cast aluminum alloy matrices [Volume 5, Issue 1, 2018, Pages 75-81]
  • Ghasemi, Behrooz Investigation of Hardness, Morphology and Structural Analysis of NiCrBSi Composite Coating on Plain Carbon Steel [Volume 6, Issue 2, 2019, Pages 75-80]
  • Ghasemi, Mohsen Sensitivity Analysis of Vibrating Laminated Composite Rec-tangular Plates in Interaction with Inviscid Fluid Using EFAST Method [Volume 7, Issue 2, 2020, Pages 219-231]
  • Ghasemi Ghalebahman, Ahmad Delamination Analysis in Composite Root of a Carbon-Layer Reinforced Wind Turbine Blade [Volume 6, Issue 1, 2019, Pages 9-18]
  • Ghashochi-Bargh, Hadi Vibration Optimization of Fiber-Metal Laminated Composite Shallow Shell Panels Using an Adaptive PSO Algorithm [Volume 4, Issue 2, 2017, Pages 99-110]
  • Ghavanloo, Esmaeal Buckling Analysis of Spherical Composite Panels Reinforced by Carbon Nanotube [Volume 2, Issue 2, 2015, Pages 135-144]
  • Ghazavi, Mohammad Reza Free Vibration Analysis of Composite Plates with Artificial Springs by Trigonometric Ritz Method [Volume 1, Issue 1, 2014, Pages 61-70]
  • Ghazifard, Payman Numerical Crashworthiness Analysis of Graded Layered Foam- Filled Tubes Under Axial Loading [Volume 6, Issue 1, 2019, Pages 57-64]
  • Ghiasvand, Mohsen Molecular Dynamic Investigation of Graphene Oxide Presence and Three Experimental Distribution Methods in Reinforced Epoxy-Based Nanocomposites [Volume 12, Issue 1, 2025, Pages 115-128]
  • Ghoddosian, Ali The Effect of Different Weighting Ratios, Length, and Thickness on Weighted Sum of the First Natural Frequency and Critical Buckling Load for a Laminated Composite Circular Cylindrical Shell [Volume 8, Issue 1, 2021, Pages 87-98]
  • Ghods, H. Effect of Particle Size on the Structural and Mechanical Properties of Al–AlN Nanocomposites Fabricated by Mechanical Alloying [Volume 2, Issue 2, 2015, Pages 73-78]
  • Gholhaki, Majid Damage Detection in Concrete Filled Tube Columns Based on Experimental Modal Data and Wavelet Technique [Volume 7, Issue 2, 2020, Pages 245-254]
  • Ghorai, Anjana Propagation Behavior of Love-Type Waves in a Poro-elastic Medium using Staggered Grid Finite Difference Scheme [Volume 8, Issue 2, 2021, Pages 359-365]
  • Ghorbanpour Arani, Ali Vibration Analysis of Sandwich Beams with Magnetorheological Elastomer Core and FGM Graphene Nanoplatelet-Reinforced Polymer Faces on Viscoelastic Foundation [(Articles in Press)]
  • Ghorbanpour-Arani, Ali Biaxial Buckling and Bending of Smart Nanocomposite Plate Reinforced by CNTs using Extended Mixture Rule Approach [Volume 1, Issue 1, 2014, Pages 17-26]
  • Ghorbanzadeh Ahangari, Morteza Investigation of Capsulated Epoxy and DCPD in Epoxy Based Self-healing Composites - DFT Calculation and Experimental Analysis [Volume 5, Issue 2, 2018, Pages 165-171]
  • Ghorbanzadeh-Ahangari, Morteza Effect of Curvature on the Mechanical Properties of Graphene: A Density Functional Tight-binding Approach [Volume 3, Issue 1, 2016, Pages 9-13]
  • Ghugal, Y.M. Static Flexure of Soft Core Sandwich Beams using Trigonometric Shear Deformation Theory [Volume 2, Issue 1, 2015, Pages 45-53]
  • Ghugal, Yuwaraj M. Bending, buckling and free vibration responses of hyperbolic shear deformable FGM beams [Volume 5, Issue 1, 2018, Pages 13-24]
  • Gohil, Piyush Artificial Neural Network (ANN) Approach to Predict Tensile Properties of Longitudinally Placed Fiber Reinforced Polymeric Composites including Interphase [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 353-360]
  • Golestanian, Hossein Effects of Nanotube/Matrix Interface on Multi-Walled Carbon Nanotube Reinforced Polymer Mechanical Properties [Volume 4, Issue 3, 2017, Pages 211-223]
  • Golestanian, Hossein Molecular Dynamics Simulation of Functional and Hybrid Epoxy Based Nanocomposites [Volume 7, Issue 2, 2020, Pages 233-243]
  • Golkarian, Amirreza A New Numerical Solution of 3D Nonlinear Thermo-Mechanical Bending Analysis of Functionally Graded Annular Thick Plate Under Asymmetric Boundary Conditions and Non-Uniform Local Loading [(Articles in Press)]
  • Golmakani, M.E. Buckling Analysis of Functionally Graded Cylindrical Shells Under Mechanical and Thermal Loads by Dynamic Relaxation Method [Volume 7, Issue 2, 2020, Pages 297-311]
  • Golmakani, M.E. Buckling Analysis of Nano Composite Plates Based on Combination of the Incremental Load Technique and Dynamic Relaxation Method [Volume 8, Issue 1, 2021, Pages 133-148]
  • Golmakani, Mohammad Esmaiel Experimental and Numerical Study on the Strength of Repaired Steel Pipes with Composite Patches under Internal Pressure [Volume 10, Issue 2, 2023, Pages 437-448]
  • Golmakani, Mohammad Esmaiel Nonlinear Dynamic Analysis of Annular FG Porous Sandwich Plates Reinforced by Graphene Platelets [Volume 11, Issue 1, 2024, Pages 131-148]
  • Goodarzi, Hamed Microwave-Assisted Two-Step Sintering of Al/8wt%TiC Composite Prepared by Powder Metallurgy [Volume 8, Issue 2, 2021, Pages 291-298]
  • Govindhan Radhakrishnan, Rajesh Kanna Optimization of AA6351-SiC-B4C Hybrid Composites in Wire EDM Using Grey Relation Technique [Volume 11, Issue 2, 2024, Pages 385-400]
  • Gupta, Sneha Initial Buckling Behavior of Elastically Supported Rectangular FGM Plate based on Higher Order Shear Deformation Theory via Spline RBF Method [Volume 11, Issue 1, 2024, Pages 59-72]
  • Gupta, Sneha Engineering Behavior of Municipal Solid Waste Incinerated Ash with Compressible Soil: An Approach Towards the Waste Utilization & Stabilization of Compressible Soil [Volume 12, Issue 1, 2025, Pages 85-96]
  • Gururaj, Chandran A Review of Research Outcomes on Fabrication Methods and Investigations for Evaluating Fracture Behavior of Aluminum Metal Matrix Composites with its Applications [Volume 8, Issue 2, 2021, Pages 347-358]

H

  • Habibi, Nabard Transient Thermal Stresses Analysis in a FPGM Cylinder [Volume 6, Issue 2, 2019, Pages 81-94]
  • Habibnejad Korayem, Moharram Study of Laminated Composite MEMS and NEMS Performance in Nano Metric Operations [Volume 4, Issue 1, 2017, Pages 19-31]
  • Hadji, Lazreg Numerical And Analytical Investigation Of Free Vibration Behavior Of Porous Functionally Graded Sandwich Plates [(Articles in Press)]
  • Haftchenari, H. Size Effect on the Damaged Areas of Glass/Epoxy Structures under Low Velocity Impact [Volume 1, Issue 2, 2014, Pages 81-85]
  • Haghighatkhah, Amir Reza Mechanical Properties of Graphene/Epoxy Nanocomposites under Static and Flexural Fatigue Loadings [Volume 1, Issue 1, 2014, Pages 1-7]
  • Haghighi, Mahmoud Molecular Dynamics Simulation of Functional and Hybrid Epoxy Based Nanocomposites [Volume 7, Issue 2, 2020, Pages 233-243]
  • Hajialimohammadi, Alireza Ultrasonic Assisted Drilling of Carbon Fiber Reinforced Plastic Composites with Non-Rotating Vibratory Tool [Volume 9, Issue 1, 2022, Pages 147-154]
  • Hajinejad Sorkhi, Mohsen Analytical and Numerical Solution of Heat Transfer Equation in Rectangular Composite Fins [Volume 9, Issue 1, 2022, Pages 199-211]
  • Hakim, Shokoufeh Cured Poly(ethylene-g-maleic anhydride)/Graphene Nanocomposite: Properties and Characterization [Volume 5, Issue 1, 2018, Pages 1-12]
  • Hamidi, S.M. An Analytical Study on Effects of adding Nanoparticles to Water and Enhancement in Thermal Properties Based on Falkner-Skan Model [Volume 1, Issue 1, 2014, Pages 27-35]
  • Hariharan, Sreeram Optimization of AA6351-SiC-B4C Hybrid Composites in Wire EDM Using Grey Relation Technique [Volume 11, Issue 2, 2024, Pages 385-400]
  • Harwande, S. Quick Review and Assessment of Thermal Stress Analyses for Exact and Assumed Temperature Distribution for Composite and Sandwich Laminates [Volume 10, Issue 2, 2023, Pages 343-362]
  • Hasanabadi, Mohammad Production and Investigation of Natural Zeolite-TiO2/CuO Nanoparticles Composite [Volume 10, Issue 1, 2023, Pages 205-210]
  • Hassan, Md Mehadi Material Mechanical Properties Prediction of Layer with Multidirectional Fiber Ply Reinforced Polymer Matrix Composites [Volume 9, Issue 2, 2022, Pages 221-227]
  • Hatami, Shahabeddin Dynamic Stiffness Method for Free Vibration of Moderately Thick Functionally Graded Plates [Volume 3, Issue 1, 2016, Pages 15-30]
  • Hayati, Sajad Investigation of Tensile Characteristics of an Epoxy Matrix Com-posite with Uni-Directional and Hybrid Tissue Natural Hemp Fibers [Volume 6, Issue 2, 2019, Pages 181-190]
  • Hayati, Sajad Artificial Intelligence Method for Predicting Mechanical Properties of Sand/Glass Reinforced Polymer: a New Model [Volume 8, Issue 2, 2021, Pages 245-268]
  • H. Bakhy, Sadeq Numerical And Analytical Investigation Of Free Vibration Behavior Of Porous Functionally Graded Sandwich Plates [(Articles in Press)]
  • Hedayati, F. An Analytical Study on Effects of adding Nanoparticles to Water and Enhancement in Thermal Properties Based on Falkner-Skan Model [Volume 1, Issue 1, 2014, Pages 27-35]
  • Heidari-Rarani, Mohammad Modal Characteristics of Composite Beams with Single Delamination- A Simple Analytical Technique [Volume 1, Issue 2, 2014, Pages 97-106]
  • Hemalatha, Kulandhaivel Propagation of Shear Horizontal Wave at Magneto-Electro-Elastic Structure Subjected to Mechanically Imperfect Interface [Volume 12, Issue 1, 2025, Pages 97-114]
  • Hemmatian, Hossein Optimization of Hybrid Composite Laminate Based on the Frequency using Imperialist Competitive Algorithm [Volume 1, Issue 1, 2014, Pages 37-48]
  • Hemmatian Soorki, Ali Experimental and Numerical Investigation of Reinforcement Sheet Effect on the Bending Strength of Corrugated Composite Panels [Volume 8, Issue 1, 2021, Pages 1-13]
  • Heshmati, Mahmood Artificial Intelligence Method for Predicting Mechanical Properties of Sand/Glass Reinforced Polymer: a New Model [Volume 8, Issue 2, 2021, Pages 245-268]
  • Heydari Beni, Mohsen Thermal Buckling and Thermal Induced free Vibration Analysis of Perforated Composite Plates: a Mathematical Model [Volume 7, Issue 1, 2020, Pages 15-23]
  • Heydari Beni, Mohsen Free Vibration Analysis of Combined Cylindrical-Conical Composite Shells using First-Order Shear Deformation Theory [Volume 8, Issue 2, 2021, Pages 269-282]
  • Heydari Beni, Mohsen Buckling Analysis of Composite Grid-Stiffened Cylindrical Shells Using a Generalized Equivalent Single Layer Theory [Volume 8, Issue 2, 2021, Pages 455-466]
  • Homayooni, Ahmad Study of Laminated Composite MEMS and NEMS Performance in Nano Metric Operations [Volume 4, Issue 1, 2017, Pages 19-31]
  • Hosanagara Lokesha, Nandeesh Influence of Kevlar on Impact Damage Assessment of Carbon Fibre Hybrid Composite Laminate [(Articles in Press)]
  • Hoseini, Seyed Hamed On the Nonlinear Dynamics of an Energy Harvesting Device Based on Magnetostriction [Volume 8, Issue 1, 2021, Pages 33-40]
  • Hoseinpour, Mohammad Effect of Microstructural Features and Al2O3 Doping on Aging Resistance, Mechanical Properties and Crack Propagation in 3Y-TZP Plate Ceramics for Dental Restorations: A Comprehensive Peridynamics Study [(Articles in Press)]
  • Hossain, M. R. An Experimental and Numerical Approach of Polymer Composites Based on Jute-Bamboo Natural Fiber [Volume 9, Issue 1, 2022, Pages 105-113]
  • Hosseini, Mehdi Elasto-dynamic Response Analysis of a Curved Composite Sandwich Beam Subjected to the Loading of a Moving Mass [Volume 7, Issue 2, 2020, Pages 347-354]
  • Hosseini, Mehdi An Analytical Study on the Indentation of a Layered Composite Beam and its Utilization in Low Velocity Impact Response [Volume 9, Issue 1, 2022, Pages 155-162]
  • Hosseini, Mohammad A Case Study on the Influence of Friction Coefficient and Rotational Speed on Transient Thermoelastic Response of FGM Rotating Cylinder [Volume 9, Issue 2, 2022, Pages 399-408]
  • Hosseini Farrash, Seyyed Mahdi Experimental Study on Amine-Functionalized Carbon Nanotubes’ Effect on the Thermomechanical Properties of CNT/Epoxy Nano-composites [Volume 5, Issue 1, 2018, Pages 41-48]
  • Hosseinpour, Komeil Creep Strain and Stress Analysis in Laminated Composite Pres-sure Vessels [Volume 5, Issue 2, 2018, Pages 141-147]
  • Hosseinpour, Komeil Effects of Magnetic Field in Creep Behavior of Three-Phase Laminated Composite Cylindrical Shells [Volume 6, Issue 1, 2019, Pages 51-56]
  • Hosseinpour, Komeil Thermal Variations of Thermo-Mechanical Loading Effects on Creep Stress and Strain Distribution in Multi-layered Composite Cylinder [Volume 9, Issue 1, 2022, Pages 115-123]
  • H Soudmand, Behzad Numerical Simulation of a Hybrid Nanocomposite Containing Ca-CO3 and Short Glass Fibers Subjected to Tensile Loading [Volume 4, Issue 2, 2017, Pages 117-125]

I

  • Iftitah, R. Physical and Mechanical Properties of Biodegradable Film from Taro Starch (Xanthosoma Sagittifolium) and Duck Bone Gelatin [Volume 9, Issue 2, 2022, Pages 213-220]
  • Ighalo, J. O. Mechanical, Crystallographic, and Microstructural Analysis of Polymer Composites Developed from Iron Filings and Polystyrene Wastes [Volume 9, Issue 1, 2022, Pages 137-145]
  • Ihueze, Christopher Chukwutoo The Graft of ANN-FEM Technique in Macro-mechanics of Multi-oriented Natural Fiber/Polyester Laminates [Volume 8, Issue 1, 2021, Pages 51-68]
  • Imani, Kazem Crashworthiness Study of an Innovative Helmet Liner Composed of an Auxetic Lattice Structure and PU Foam [Volume 9, Issue 1, 2022, Pages 25-35]
  • Inala, Ramu Influence of Hygrothermal Environment and FG Material on Natural Frequency and Parametric Instability of Plates [Volume 7, Issue 1, 2020, Pages 89-101]
  • Iourzikene, Zouhir Failure Probability Analysis of Composite Pressure Tanks Using Subset Simulation [Volume 11, Issue 2, 2024, Pages 363-374]
  • Iqbal, Zafar Experimental Investigation and Simulation of Electro-Mechanical Behaviour of Hybrid Sandwich Composite Radomes for Aerospace Applications [Volume 11, Issue 2, 2024, Pages 401-412]
  • Irawan, Yudy Surya Pandanus Tectorius Fiber/ Rice Husk Powder As Green Reinforcement For Lightweight Composites: Evaluation Of Impact Strength Properties And Thermal Stability [(Articles in Press)]
  • Islam, M. T. An Experimental and Numerical Approach of Polymer Composites Based on Jute-Bamboo Natural Fiber [Volume 9, Issue 1, 2022, Pages 105-113]

J

  • Jabbari, Ali Parametric Investigation of Particle Movements in Ultrasonic Levitation Process Using Piezoelectric Materials [(Articles in Press)]
  • Jabbari, Amirhossein Experimental Investigation of FGM Dental Implant Properties Made from Ti/HA Composite [Volume 4, Issue 3, 2017, Pages 233-237]
  • Jabbarzadeh, Mehrdad A New Numerical Solution of 3D Nonlinear Thermo-Mechanical Bending Analysis of Functionally Graded Annular Thick Plate Under Asymmetric Boundary Conditions and Non-Uniform Local Loading [(Articles in Press)]
  • Jadidi, Tohid Ultrasonic Assisted Drilling of Carbon Fiber Reinforced Plastic Composites with Non-Rotating Vibratory Tool [Volume 9, Issue 1, 2022, Pages 147-154]
  • Jafari, Ali Asghar Active control of free and forced vibration of rotating laminated composite cylindrical shells embedded with magnetostrictive layers based on classical shell theory [Volume 7, Issue 2, 2020, Pages 355-369]
  • Jafari, Ali Asghar Nonlinear Vibration of Rotating Laminated Composite Cross-ply Cylindrical Shell on Nonlinear Rotating Elastic Foundation [Volume 9, Issue 2, 2022, Pages 317-334]
  • Jafari, Behrouz Cured Poly(ethylene-g-maleic anhydride)/Graphene Nanocomposite: Properties and Characterization [Volume 5, Issue 1, 2018, Pages 1-12]
  • Jafari, Hojat Nonlinear Dynamic Analysis of Annular FG Porous Sandwich Plates Reinforced by Graphene Platelets [Volume 11, Issue 1, 2024, Pages 131-148]
  • Jafari, Mohammad Optimization of infinite composite plates with quasi-triangular holes under in-plane loading [Volume 5, Issue 2, 2018, Pages 115-130]
  • Jafari, Seyed Mohammad Health Monitoring for Composite under Low-Cycle Cyclic Loading, Considering Effects of Acoustic Emission Sensor Type [Volume 6, Issue 1, 2019, Pages 19-26]
  • Jafari, Seyed Sajad Analytical Modeling of Functionally Graded Carbon Nanotube-Reinforced Composite Plates under Low-Velocity Impact [Volume 11, Issue 2, 2024, Pages 281-294]
  • Jafari Fesharaki, Javad Mechanical Behavior and Optimization of Functionally Graded Hollow Cylinder with an Elliptic Hole [Volume 7, Issue 2, 2020, Pages 189-201]
  • Jafari Mofrad-Taheri, M. Static and Free Vibration Analyses of Functionally Graded Nano-composite Plates Reinforced by Wavy Carbon Nanotubes Resting on a Pasternak Elastic Foundation [Volume 3, Issue 2, 2016, Pages 123-135]
  • Jafarinezhad, Mohammad Reza Compression Analysis of Hollow Cylinder Basalt Continuous Filament Epoxy Composite Filled with Shape Memory Wire [Volume 4, Issue 3, 2017, Pages 225-232]
  • Jaferzadeh Khoramabadian, Ali Asghar Investigation of Tensile Characteristics of an Epoxy Matrix Com-posite with Uni-Directional and Hybrid Tissue Natural Hemp Fibers [Volume 6, Issue 2, 2019, Pages 181-190]
  • Jaiswal, Soumyajeet Design and Development of a Pine Needle Briquetting Machine for the Uttarakhand Region of India [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 293-303]
  • Jam, J.E. Mechanical Properties of CNT-Reinforced Polymer Nano-composites: A Molecular Dynamics Study [Volume 3, Issue 2, 2016, Pages 113-121]
  • Jamal-Omidi, Majid Experimental Investigation on Quasi-Static Impact Response of Glass/Epoxy Composite Corrugated Core Sandwich Panels [Volume 10, Issue 2, 2023, Pages 283-294]
  • Jamshiddoust, Asghar Investigation of Vibration Energy Harvesting in Multilayer Composite Plates with Anisotropic Piezoelectric Patches [Volume 12, Issue 1, 2025, Pages 223-234]
  • Jandaghian, Ali-Akbar Nonlinear Torsional Vibration of Size-Dependent Functionally Graded Rods [Volume 11, Issue 1, 2024, Pages 41-58]
  • Jangi, Reza Experimental Study of Buckling of Reinforced Conical Composite Shell Under Hydrostatic Loading [Volume 9, Issue 2, 2022, Pages 359-366]
  • Jatti, Vijay Kumar Tensile, Flexural and Impact strength analysis of a 3D printed Carbon Fiber Reinforced Nylon Filament [(Articles in Press)]
  • Jatti, Vijay Kumar Lattice Structure Optimization of 3D Printed TPMS under Different Loading Conditions Using Regression Machine Learning [(Articles in Press)]
  • Jatti, Vijaykumar S. Quantum Machine Learning Approach for the Prediction of Surface Roughness in Additive Manufactured Specimens [(Articles in Press)]
  • Javadian, Mohammad Artificial Intelligence Method for Predicting Mechanical Properties of Sand/Glass Reinforced Polymer: a New Model [Volume 8, Issue 2, 2021, Pages 245-268]
  • Javanmiri, Saeed Artificial Intelligence Method for Predicting Mechanical Properties of Sand/Glass Reinforced Polymer: a New Model [Volume 8, Issue 2, 2021, Pages 245-268]
  • Jawaid, S. M. Ali Flexural Behaviour of Nanocomposite Plate with CNT Distribution and Agglomeration Effect [Volume 10, Issue 1, 2023, Pages 123-136]
  • Jawaid, S. M. Ali Free Vibration Response of Agglomerated Carbon Nanotube-Reinforced Nanocomposite Plates [Volume 10, Issue 1, 2023, Pages 167-194]
  • Jawaid, S. M. Ali Response of Agglomerated SWCNT Reinforced Nanocomposite Plate under Hygro-Thermal Loading [Volume 11, Issue 1, 2024, Pages 11-40]
  • Jayappa, Kumaraswamy Effect of Chilling & B4C content on Machining Efficiency and Surface Quality in Wire-Cut Machining of Aluminum Matrix Chilled Composites [Volume 11, Issue 2, 2024, Pages 341-350]
  • Jayasankar, Prabhakaran Modeling and Numerical Prediction on Mechanical Behaviors of Hybrid Fiber Reinforced Polymer Bio Composites Using Fuzzy Logic Algorithm [Volume 12, Issue 1, 2025, Pages 199-210]
  • Jha, Vinay Chandra Polyester/Kota Stone Dust Composite: A Comprehensive Investigation of Mechanical and Sliding Wear Properties [Volume 11, Issue 2, 2024, Pages 375-384]
  • Jhala, Ramdevsinh Lalubha Mechanical Characterization of Glass-Basalt Hybrid Composites with Different Fiber Weight Fraction [Volume 11, Issue 2, 2024, Pages 295-308]
  • Joladarashi, Sharnappa Comparative study on impact responses of sandwich composites with stiff and compliant core materials [(Articles in Press)]
  • Joshi, Ayush Design and Development of a Pine Needle Briquetting Machine for the Uttarakhand Region of India [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 293-303]

K

  • Kabiri, Ali Sensitivity Analysis of Fiber-Reinforced Lamina Micro-Electro-Mechanical Switches with Nonlinear Vibration Using a Higher Order Hamiltonian Approach [Volume 5, Issue 1, 2018, Pages 25-39]
  • Kabiri Ataabadi, Abdulreza Experimental and Numerical Investigation of Reinforcement Sheet Effect on the Bending Strength of Corrugated Composite Panels [Volume 8, Issue 1, 2021, Pages 1-13]
  • Kachhot, Deepak Mechanical Properties and Water Absorption of Epoxy Composites Reinforced with Treated Long Hair Fiber for Sustainable Manufacturing [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 379-392]
  • Kadkhodayan, Mehran Application of Bi-Directional Functionally Graded Material Model for Free Vibration Analysis of Rotating Euler-Bernoulli Nanobeams [Volume 8, Issue 2, 2021, Pages 389-399]
  • Kadum Njim, Emad Numerical And Analytical Investigation Of Free Vibration Behavior Of Porous Functionally Graded Sandwich Plates [(Articles in Press)]
  • Kafi, Mohamad Ali Investigation of Nonlinear Behavior of Composite Bracing Structures with Concrete Columns and Steel Beams (RCS) Applying Finite Element Method [Volume 7, Issue 1, 2020, Pages 25-37]
  • Kaleemulla K, Mohamed Effect of Aging on Fracture Toughness of Al6061-Graphite Particulate Composites [Volume 6, Issue 2, 2019, Pages 139-146]
  • Kalidindi, Krishna Bhaskar Experimental Modal Analysis of Viscoelastic Sandwich Structures [Volume 12, Issue 1, 2025, Pages 181-198]
  • Kallannavar, Vinayak Active Vibration Control of Laminated Composite Beam Operating in Thermal Environment using PZT-5H Patches [Volume 9, Issue 2, 2022, Pages 387-398]
  • Kamali, Fahimeh A Comparative Study on the Microstructure and Mechanical Properties of Al-Si-Cu/1wt %NCP Composites after T6 Heat Treatment [Volume 7, Issue 1, 2020, Pages 129-136]
  • Kamali, Kamran A Novel Method for Considering Interlayer Effects between Graphene Nanoribbons and Elastic Medium in Free Vibration Analysis [Volume 7, Issue 1, 2020, Pages 79-88]
  • Kami, Abdolvahed An Investigation on Three-Point Bending of Foam-Filled Double Tubes and Parameter Optimization Using Response Surface Methodology [Volume 8, Issue 1, 2021, Pages 41-50]
  • Kami, Abdolvahed Deposition of an Al/SiC Composite Coating on Steel by Friction Surfacing: Corrosion and Wear Properties [Volume 9, Issue 2, 2022, Pages 287-296]
  • Kami, Abdolvahed Tensile and Flexural Properties of 3D-Printed Polylactic Acid/Continuous Carbon Fiber Composite [Volume 10, Issue 2, 2023, Pages 407-418]
  • Kannapiran, K. Optimization of Wear Behaviour on Mg-TiO2 Nanocomposite Using Taguchi Grey Relational Analysis [Volume 10, Issue 1, 2023, Pages 151-156]
  • Kanoria, M. Elasto-Thermodiffusive Response in a Two-Dimensional Transversely Isotropic Medium [Volume 6, Issue 2, 2019, Pages 95-104]
  • Kanoria, M. Thermoelastic Interaction in a Three-Dimensional Layered Sandwich Structure [Volume 5, Issue 2, 2018, Pages 187-198]
  • Karami, Hojat Improving the Performance of Porous Concrete Composites Using Zeolite as a Coarse Grain [Volume 5, Issue 2, 2018, Pages 157-163]
  • Karamooz, Mohammadreza Elastic analysis of Shrink-fitted Thick FGM Cylinders Based on Linear Plane Elasticity Theory [Volume 7, Issue 1, 2020, Pages 121-127]
  • Karamooz Mahdiabadi, Morteza Investigation of Vibration Energy Harvesting in Multilayer Composite Plates with Anisotropic Piezoelectric Patches [Volume 12, Issue 1, 2025, Pages 223-234]
  • Karimi, Bromand Analytical Modeling of Functionally Graded Carbon Nanotube-Reinforced Composite Plates under Low-Velocity Impact [Volume 11, Issue 2, 2024, Pages 281-294]
  • Karimi, Mahdi Fluid-Structure Interaction of Vibrating Composite Piezoelectric Plates Using Exponential Shear Deformation Theory [Volume 7, Issue 1, 2020, Pages 59-69]
  • Karimi, Mahdi Analytical Approach for Thermo-electro-mechanical Vibration of Piezoelectric Nanoplates Resting on Elastic Foundations based on Nonlocal Theory [Volume 6, Issue 2, 2019, Pages 117-129]
  • Karimi, Mahdi Size-dependent Electro-Mechanical Vibration Analysis of FGPM Composite Plates using Modified Shear Deformation Theories [Volume 8, Issue 1, 2021, Pages 157-169]
  • Karimi, Mahdi Free Vibration Analysis of Size-Dependent Multi-Layered Graphene Sheets Based on Strain Gradient Elasticity Theory [Volume 9, Issue 2, 2022, Pages 275-285]
  • Karimi, Mohamadhadi Non-Linear Analysis of Functionally Graded Sector Plates with Simply Supported Radial Edges Under Transverse Loading [Volume 6, Issue 1, 2019, Pages 65-74]
  • Karimzadeh, A. Atomic Simulation of Temperature Effect on the Mechanical Properties of Thin Films [Volume 2, Issue 1, 2015, Pages 31-38]
  • Karthikeyan, T. A. S-Parameter Analysis of Three-Layered Aperture Coupled Antenna with a Flame Retardant-4 Composite Material as Substrate for Biomedical Applications [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 361-369]
  • Karuppanan, Saravanan Finite Element Analysis of Mechanical Properties of Basalt-Carbon Epoxy Hybrid Laminates [Volume 9, Issue 2, 2022, Pages 263-274]
  • Kashyap, Satadru Modeling the Buckling Characteristics of Pineapple Leaf Fibre Reinforced Laminated Epoxy Composites [Volume 10, Issue 2, 2023, Pages 233-246]
  • Kattimani, Subhaschandra Active Vibration Control of Laminated Composite Beam Operating in Thermal Environment using PZT-5H Patches [Volume 9, Issue 2, 2022, Pages 387-398]
  • Kaurase, Kalpit P Influence of Filler Content on the Mechanical, Thermal, Moisture Absorption, and Biodegradability Properties of Bionanocomposite with Cellulosic Fibers Derived from Delonix Regia Fruits [Volume 11, Issue 1, 2024, Pages 73-86]
  • Kaveh, Amir Enhancing Strength of Nomex Sandwich Structures through the Utilization of Nano Clay Dispersed Epoxy Resin: A Study in Aerospace Applications [(Articles in Press)]
  • Kebritchi, Abass Molecular Dynamic Investigation of Graphene Oxide Presence and Three Experimental Distribution Methods in Reinforced Epoxy-Based Nanocomposites [Volume 12, Issue 1, 2025, Pages 115-128]
  • Keshavarzian, Mehdi High-order Analysis of Linear Vibrations of a ModeratleyThick Sandwich Panel With an Electrorheological Core [Volume 7, Issue 2, 2020, Pages 177-188]
  • Keshvari Tabatabaie, Fereshteh Sadat Investigation of Hardness, Morphology and Structural Analysis of NiCrBSi Composite Coating on Plain Carbon Steel [Volume 6, Issue 2, 2019, Pages 75-80]
  • Keykha, Amir Hamzeh Experimental investigation of the strength of glass fiber-reinforced concrete exposed to high temperature [Volume 5, Issue 2, 2018, Pages 103-113]
  • Keykha, Amir Hamzeh Strengthening of Deficient Steel Sections using CFRP Composite under Combined Loading [Volume 7, Issue 2, 2020, Pages 287-296]
  • Khaldi, Mokhtar Experimental and Numerical Analyses of Alfa/Polyester Composite Under Three-Point Bending [Volume 12, Issue 1, 2025, Pages 211-222]
  • Khalili, Ali Tensile and Flexural Properties of 3D-Printed Polylactic Acid/Continuous Carbon Fiber Composite [Volume 10, Issue 2, 2023, Pages 407-418]
  • Khalili, Mohammad Reza Compression Analysis of Hollow Cylinder Basalt Continuous Filament Epoxy Composite Filled with Shape Memory Wire [Volume 4, Issue 3, 2017, Pages 225-232]
  • Khalili, S. Mohammad Reza Investigation of Tensile Characteristics of an Epoxy Matrix Com-posite with Uni-Directional and Hybrid Tissue Natural Hemp Fibers [Volume 6, Issue 2, 2019, Pages 181-190]
  • Khalili, S.M.R. Accelerated Heat Aging Study of Phenolic/Basalt Fiber Reinforced Composites [Volume 3, Issue 1, 2016, Pages 1-7]
  • Khalili, S.M.R. The Effect of External Skin on Buckling Strength of Composite Lattice Cylinders Based on Numerical and Experimental Analysis [Volume 3, Issue 2, 2016, Pages 83-87]
  • Khamsin, Thanasak Mechanical Properties of Hemp Fiber-Reinforced Polypropylene Composites for Drone Propeller Guard Application [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 271-277]
  • Khan, Sikander Initial Buckling Behavior of Elastically Supported Rectangular FGM Plate based on Higher Order Shear Deformation Theory via Spline RBF Method [Volume 11, Issue 1, 2024, Pages 59-72]
  • Khani, Mohammadreza Synthesis and Characterization of MgF2/Cu Coating on Aluminum Produced by Sputtering Technique [Volume 9, Issue 2, 2022, Pages 297-302]
  • Kharaman-Nia, Iman Experimental Study on Double-Walled Copper and Carbon/Epoxy Composite Tubes under the Axial Loading [Volume 1, Issue 2, 2014, Pages 71-79]
  • Kharate, Namrate A Comparative Study of Machine Learning Techniques for Predicting Mechanical Properties of Fused Deposition Modelling (FDM)-Based 3D-Printed Wood/PLA Biocomposite [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 261-270]
  • Khare, Sumit Numerical Investigation on Free Vibration Response of Bi-Directional Porous Functionally Graded Circular/Annular Plates [Volume 9, Issue 2, 2022, Pages 243-262]
  • Kharrati, Khaled Thermomechanical and Physical Properties of Plaster Concrete Reinforced with Natural Fibers [Volume 10, Issue 2, 2023, Pages 295-308]
  • Khatibi, Mohammad Mahdi Vibration Analysis of Circular Single-Layer Graphene Sheet Using Finite Element Method [Volume 6, Issue 2, 2019, Pages 131-138]
  • Kheyroddin, Ali Investigation of Nonlinear Behavior of Composite Bracing Structures with Concrete Columns and Steel Beams (RCS) Applying Finite Element Method [Volume 7, Issue 1, 2020, Pages 25-37]
  • Kheyroddin, Ali Strengthening of One-Way Slabs Using Composite Laminates of HPFRCC Including Synthetic Fibers PPS [Volume 9, Issue 1, 2022, Pages 185-197]
  • Khirzin, M. H. Physical and Mechanical Properties of Biodegradable Film from Taro Starch (Xanthosoma Sagittifolium) and Duck Bone Gelatin [Volume 9, Issue 2, 2022, Pages 213-220]
  • Khobragade, Pallavi Numerical And Analytical Investigation Of Free Vibration Behavior Of Porous Functionally Graded Sandwich Plates [(Articles in Press)]
  • Khodabakhsh, Rasoul Nonlinear Vibration Analysis of the Composite Cable using Perturbation Method and the Green-Lagrangian Nonlinear Strain [Volume 6, Issue 1, 2019, Pages 27-34]
  • Khodadadi, Ali Molecular Dynamics Simulation of Functional and Hybrid Epoxy Based Nanocomposites [Volume 7, Issue 2, 2020, Pages 233-243]
  • Khodadadi, Mohammad Precision Closed-form Solution for Out-of-plane Vibration of Rectangular Plates via Trigonometric Shear Deformation Theory [Volume 3, Issue 1, 2016, Pages 31-43]
  • Khoddami Maraghi, Zahra Vibration Analysis of Sandwich Beams with Magnetorheological Elastomer Core and FGM Graphene Nanoplatelet-Reinforced Polymer Faces on Viscoelastic Foundation [(Articles in Press)]
  • Khoramishad, Hadi Mechanical and Physical Properties of Glass-Fiber Reinforced Polymer Rods Manufactured by Different Pultrusion Methods [Volume 8, Issue 1, 2021, Pages 99-107]
  • Khorsand, Hamid On the Study of Mechanical Properties of Aluminum/Nano-Alumina Composites Produced via Powder Injection Molding [Volume 3, Issue 1, 2016, Pages 45-51]
  • Khorshidi, K. Analytical Solution for Sound Radiation of Vibrating Circular Plates coupled with Piezo-electric Layers [Volume 3, Issue 2, 2016, Pages 89-98]
  • Khorshidi, Korosh Free Vibration Analysis of Composite Plates with Artificial Springs by Trigonometric Ritz Method [Volume 1, Issue 1, 2014, Pages 61-70]
  • Khorshidi, Korosh Free Natural Frequency Analysis of an FG Composite Rectangular Plate Coupled with Fluid using Rayleigh–Ritz Method [Volume 1, Issue 2, 2014, Pages 131-143]
  • Khorshidi, Korosh Precision Closed-form Solution for Out-of-plane Vibration of Rectangular Plates via Trigonometric Shear Deformation Theory [Volume 3, Issue 1, 2016, Pages 31-43]
  • Khorshidi, Korosh Free Vibrations Analysis of Functionally Graded Rectangular Nano-plates based on Nonlocal Exponential Shear Deformation Theory [Volume 2, Issue 2, 2015, Pages 79-93]
  • Khorshidi, Korosh Free Vibration Analysis of Size-Dependent, Functionally Graded, Rectangular Nano/Micro-plates based on Modified Nonlinear Couple Stress Shear Deformation Plate Theories [Volume 4, Issue 2, 2017, Pages 127-137]
  • Khorshidi, Korosh Fluid-Structure Interaction of Vibrating Composite Piezoelectric Plates Using Exponential Shear Deformation Theory [Volume 7, Issue 1, 2020, Pages 59-69]
  • Khorshidi, Korosh Analytical Approach for Thermo-electro-mechanical Vibration of Piezoelectric Nanoplates Resting on Elastic Foundations based on Nonlocal Theory [Volume 6, Issue 2, 2019, Pages 117-129]
  • Khorshidi, Korosh Sensitivity Analysis of Vibrating Laminated Composite Rec-tangular Plates in Interaction with Inviscid Fluid Using EFAST Method [Volume 7, Issue 2, 2020, Pages 219-231]
  • Khorshidi, Korosh High-order Analysis of Linear Vibrations of a ModeratleyThick Sandwich Panel With an Electrorheological Core [Volume 7, Issue 2, 2020, Pages 177-188]
  • Khorshidi, Korosh Size-dependent Electro-Mechanical Vibration Analysis of FGPM Composite Plates using Modified Shear Deformation Theories [Volume 8, Issue 1, 2021, Pages 157-169]
  • Khorshidi, Korosh Free Vibration Analysis of Size-Dependent Multi-Layered Graphene Sheets Based on Strain Gradient Elasticity Theory [Volume 9, Issue 2, 2022, Pages 275-285]
  • Khorshidi, Korosh Buckling Analysis of Sandwich Structures with Metamaterials Core Integrated by Graphene Nanoplatelets Reinforced Polymer Composite [Volume 10, Issue 1, 2023, Pages 1-10]
  • Khorshidi, Korosh Static Buckling and Free Vibration Analysis of Bi-Dimensional FG Metal Ceramic Porous Beam [Volume 11, Issue 1, 2024, Pages 149-158]
  • Khorshidi, Korosh Investigation of Free Vibration in Fluid-Loaded Cylindrical Shells with a Three-Layer Sandwich Wall and an Auxetic Central Layer [Volume 12, Issue 1, 2025, Pages 53-72]
  • Khosravi, H. Flexural Behavior of Fiber–Metal Laminates Reinforced with Surface-Functionalized Nanoclay [Volume 5, Issue 2, 2018, Pages 149-156]
  • Khostavan, Sepide Investigation of Capsulated Epoxy and DCPD in Epoxy Based Self-healing Composites - DFT Calculation and Experimental Analysis [Volume 5, Issue 2, 2018, Pages 165-171]
  • Khumsamor, Nawapol The Impact of Fiber Architecture on the Mechanical Properties of Hand Lay-up Reinforced Polyester Resin [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 393-400]
  • Kiani, Sina Buckling analysis of FML cylindrical shells under combined axial and torsional loading [Volume 7, Issue 2, 2020, Pages 263-270]
  • Kiarasi, Faraz Numerical Investigation on Thermal Post-buckling Of Annular Sector Plates Made of FGM Via 3D Finite Element Method [Volume 8, Issue 2, 2021, Pages 309-320]
  • Kirtania, Sushen Modeling the Buckling Characteristics of Pineapple Leaf Fibre Reinforced Laminated Epoxy Composites [Volume 10, Issue 2, 2023, Pages 233-246]
  • Kohandani, Reza A New Three-Dimensional Refined Higher-Order Theory for Free Vibration Analysis of Composite Circular Cylindrical Shells [Volume 6, Issue 2, 2019, Pages 201-223]
  • Konovalov, Dmitriy Effect of the Nature of Oxide Nanofillers on Changes in the Mechanical Properties of Epoxy Coatings under Thermal Cycling [Volume 10, Issue 1, 2023, Pages 195-204]
  • Koohestani, Hassan Synthesis and Characterization of MgF2/Cu Coating on Aluminum Produced by Sputtering Technique [Volume 9, Issue 2, 2022, Pages 297-302]
  • Koohestani, Hassan Production and Investigation of Natural Zeolite-TiO2/CuO Nanoparticles Composite [Volume 10, Issue 1, 2023, Pages 205-210]
  • Koohi Faegh Dehkourdi, Reza A Case Study on the Influence of Friction Coefficient and Rotational Speed on Transient Thermoelastic Response of FGM Rotating Cylinder [Volume 9, Issue 2, 2022, Pages 399-408]
  • Koppanati, Meera Saheb Free Vibration Analysis of Graphene Reinforced Laminated Composite Plates using Experimental Modal Testing [Volume 10, Issue 2, 2023, Pages 363-374]
  • Koppanati, Meera-Saheb Experimental Modal Analysis of Viscoelastic Sandwich Structures [Volume 12, Issue 1, 2025, Pages 181-198]
  • Kori, S A Mechanical Characterization and Wear Behavior of Nano TiO2 Particulates Reinforced Al7075 Alloy Composites [Volume 7, Issue 1, 2020, Pages 71-78]
  • Kotasthane, Atharva M. Finite Element Analysis of Mechanical Properties of Basalt-Carbon Epoxy Hybrid Laminates [Volume 9, Issue 2, 2022, Pages 263-274]
  • Kouchakzadeh, M. A. Dynamic Characteristics of Joined Steel and Carbon Fiber-Reinforced Plastic Tubes: Experimental and Numerical Investigation [Volume 4, Issue 2, 2017, Pages 88-97]
  • Kozekanan, Behnam Salmany The Effect of Al Additive and Arc Melting Time on Synthesis of Ti3SiC2 MAX Phase using Ti/SiC/Al/Graphite [Volume 9, Issue 2, 2022, Pages 367-376]
  • Kozekanan, Behnam Salmany The Effect of Nano-B4C Additive on Microstructure and Mechanical Properties of Pressureless Sintering SiC Bodies [Volume 10, Issue 1, 2023, Pages 29-42]
  • Krishnabhaskar, Kalidindi Free Vibration Analysis of Simply Supported and Clamped Functionally Graded Rectangular Plate Using Coupled Displacement Field Method [Volume 12, Issue 1, 2025, Pages 73-84]
  • Krishna Bhaskar, k Free Vibration Analysis of Graphene Reinforced Laminated Composite Plates using Experimental Modal Testing [Volume 10, Issue 2, 2023, Pages 363-374]
  • Kulkarni, Atul A Comparative Study of Machine Learning Techniques for Predicting Mechanical Properties of Fused Deposition Modelling (FDM)-Based 3D-Printed Wood/PLA Biocomposite [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 261-270]
  • Kulkarni, Sharawari Prafulla Quick Review and Assessment of Thermal Stress Analyses for Exact and Assumed Temperature Distribution for Composite and Sandwich Laminates [Volume 10, Issue 2, 2023, Pages 343-362]
  • Kulkarni, S M Comparative study on impact responses of sandwich composites with stiff and compliant core materials [(Articles in Press)]
  • Kumar, Chandan A Meshfree Approach for Bending Analysis of Porous Rectangular FGM Plate Resting on Elastic Foundation [Volume 9, Issue 2, 2022, Pages 303-316]
  • Kumar, Manoj Short Literature Survey on Fiber-Reinforced Hybrid Composites [Volume 11, Issue 2, 2024, Pages 425-452]
  • Kumar, Mohit Bearing Response Prediction in Hydrothermal Aged Carbon Fiber Reinforced Epoxy Composite Joints Using Machine Learning Techniques [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 329-338]
  • Kumar, Nathi Venu Free Vibration Analysis of 2D Functionally Graded Porous Beams Using Novel Higher-Order Theory [Volume 10, Issue 1, 2023, Pages 69-84]
  • Kumar, Rahul Numerical Investigation on Free Vibration Response of Bi-Directional Porous Functionally Graded Circular/Annular Plates [Volume 9, Issue 2, 2022, Pages 243-262]
  • Kumar, Rahul A Meshfree Approach for Bending Analysis of Porous Rectangular FGM Plate Resting on Elastic Foundation [Volume 9, Issue 2, 2022, Pages 303-316]
  • Kumar, Rahul Initial Buckling Behavior of Elastically Supported Rectangular FGM Plate based on Higher Order Shear Deformation Theory via Spline RBF Method [Volume 11, Issue 1, 2024, Pages 59-72]
  • Kumar, Rahul Meshfree Approach for the Torsional Analysis of Orthotropic and FGM Thin-Walled Open Sections [(Articles in Press)]
  • Kumar, Santosh Short Literature Survey on Fiber-Reinforced Hybrid Composites [Volume 11, Issue 2, 2024, Pages 425-452]
  • Kumar, Santosh Propagation of Shear Horizontal Wave at Magneto-Electro-Elastic Structure Subjected to Mechanically Imperfect Interface [Volume 12, Issue 1, 2025, Pages 97-114]
  • Kumar, Santosh Effect of Ceramic Boron Carbide Particles Addition on the Mechanical and Microstructural Characteristics of Al7020 Alloy Composites [Volume 12, Issue 1, 2025, Pages 169-180]
  • Kumar, Saurabh Engineering Behavior of Municipal Solid Waste Incinerated Ash with Compressible Soil: An Approach Towards the Waste Utilization & Stabilization of Compressible Soil [Volume 12, Issue 1, 2025, Pages 85-96]
  • Kumar, Yajuvindra Effect of Elastically Restrained Edges on Free Transverse Vibration of Functionally Graded Porous Rectangular Plate [Volume 9, Issue 2, 2022, Pages 335-348]
  • Kumar, Yajuvindra Free Vibration and Buckling Analyses of Nanobeam Embedded in Pasternak Foundation [Volume 10, Issue 2, 2023, Pages 419-436]
  • Kumar Krishnappa, Ashok Effect of ON and OFF Axis Open Hole Tensile Testing of GFRP/Epoxy Composites [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 319-328]
  • Kumshikar, Radhakrishna R Experimental and Numerical Analysis of Woven Bamboo and Jute Fiber Reinforced in Epoxy Composites [Volume 11, Issue 1, 2024, Pages 103-118]
  • Kureel, Saurabh Crashworthy Behavior of Plain Weave Glass/Epoxy Composite Tubes Containing Different Extents of Overlap of Dropped Plies [Volume 11, Issue 1, 2024, Pages 87-102]

L

  • Laksanawati, T. A. Physical and Mechanical Properties of Biodegradable Film from Taro Starch (Xanthosoma Sagittifolium) and Duck Bone Gelatin [Volume 9, Issue 2, 2022, Pages 213-220]
  • Lakshmanan, Karthikeyan Studies on Progress of Aluminum Based Composites for Automotive Applications and its Damping Characteristics – A Review [Volume 12, Issue 1, 2025, Pages 25-42]
  • Lal, Achchhe XFEM for Fracture Analysis of Centrally Cracked Laminated Plates Subjected to Biaxial Loads [Volume 8, Issue 1, 2021, Pages 213-234]
  • Lanka, Sairag Experimental Modal Analysis of Viscoelastic Sandwich Structures [Volume 12, Issue 1, 2025, Pages 181-198]
  • Lanwong, Tanakorn The Impact of Fiber Architecture on the Mechanical Properties of Hand Lay-up Reinforced Polyester Resin [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 393-400]
  • Le, Quoc-Cuong Two-dimensional Elasticity Solutions For Analyzing Free Vibration Of Functionally Graded Porous Beams [Volume 12, Issue 1, 2025, Pages 235-248]
  • Liaghat, Gholam Hossein Investigation into The Behavior of Nano-composite Tubes at Ballistic Impact [Volume 4, Issue 3, 2017, Pages 207-210]
  • Liaghat, Gholam Hossein Experimental and Numerical Investigation on the Flexural Behavior of Composite-Reinforced Top-Hat Shape Beam [Volume 8, Issue 1, 2021, Pages 149-156]
  • Loghman, Abbas Thermoelastic Analysis of a Functionally Graded Simple Blade Using First-Order Shear Deformation Theory [Volume 7, Issue 1, 2020, Pages 147-155]
  • Loh-Mousavi, Mohsen Experimental and Numerical Investigation of Reinforcement Sheet Effect on the Bending Strength of Corrugated Composite Panels [Volume 8, Issue 1, 2021, Pages 1-13]

M

  • M, Jayanandini Design and Analysis of Complementary Split Ring Resonator Based Low Profile Antenna Using Lightweight Polymers for Wireless, Radar, and Satellite Communication [(Articles in Press)]
  • Madah, Zeinab Investigation of Nonlinear Behavior of Composite Bracing Structures with Concrete Columns and Steel Beams (RCS) Applying Finite Element Method [Volume 7, Issue 1, 2020, Pages 25-37]
  • Madah, Zeinab Strengthening of One-Way Slabs Using Composite Laminates of HPFRCC Including Synthetic Fibers PPS [Volume 9, Issue 1, 2022, Pages 185-197]
  • Madan, Royal Numerical And Analytical Investigation Of Free Vibration Behavior Of Porous Functionally Graded Sandwich Plates [(Articles in Press)]
  • Madarapu, Anjaiah Multi-response Optimization while Drilling of Composite Laminate with Core Drill by Grey Entropy Fuzzy (GEF) Method [Volume 11, Issue 2, 2024, Pages 483-502]
  • Mafi, Mohammad Evaluation of hardness and wear resistance of nano-sized titanium-carbide-reinforced commercially cast aluminum alloy matrices [Volume 5, Issue 1, 2018, Pages 75-81]
  • Mahapatra, Deepak An Investigation of Stress and Deformation Behavior of Functionally Graded Timoshenko Beams subjected to Thermo-Mechanical Load [Volume 7, Issue 1, 2020, Pages 157-176]
  • Mahapatra, Deepak Higher Order Approximations for Bending of FG Beams Using B-Spline Collocation Technique [Volume 11, Issue 1, 2024, Pages 159-176]
  • Mahbod, Mahshid Crushing Analysis of Empty and Foam-Filled Cylindrical and Conical Corrugated Composite Tubes [Volume 6, Issue 1, 2019, Pages 35-44]
  • Mahdavi, Hamid Reza Damage Energy Evaluation in [55/-55]9 Composite Pipes using Acoustic Emission Method [Volume 2, Issue 2, 2015, Pages 127-134]
  • Mahdi, Akeel Zeki Investigation of Thermal Fatigue Behavior for HDPE Composites Reinforced by Nano Alumina [Volume 11, Issue 2, 2024, Pages 335-340]
  • Maher, Roham Compression Analysis of Hollow Cylinder Basalt Continuous Filament Epoxy Composite Filled with Shape Memory Wire [Volume 4, Issue 3, 2017, Pages 225-232]
  • Mahesh, S. Assessment of Hydrostatic Stress and Thermo Piezoelectricity in a Laminated Multilayered Rotating Hollow Cylinder [Volume 8, Issue 1, 2021, Pages 77-86]
  • Mahesh, Vinyas Influence of Graphene Powder on the Physio-Mechanical Properties of Jute Reinforced Epoxy Composites for Automobile Applications [Volume 11, Issue 1, 2024, Pages 239-248]
  • Mahesh, Vinyas Development and Mechanical Characterization of Light Weight Fiber Metal Laminate using Jute, Kenaf and Aluminium [Volume 11, Issue 2, 2024, Pages 259-270]
  • Mahesh, Vishwas Statistical Approach of Determining the Effect of Cenosphere on the Tribological Behaviour of Jute Reinforced Polymer Based Composite [Volume 10, Issue 1, 2023, Pages 211-220]
  • Mahesh, Vishwas Thermo-Mechanical Characterization of Jute-Bamboo Hybrid Thermoplastic Polymer Matrix Composites with Different Stacking Sequences for Automobile Applications [Volume 10, Issue 2, 2023, Pages 375-382]
  • Mahesh, Vishwas Influence of Graphene Powder on the Physio-Mechanical Properties of Jute Reinforced Epoxy Composites for Automobile Applications [Volume 11, Issue 1, 2024, Pages 239-248]
  • Mahesh, Vishwas Development and Mechanical Characterization of Light Weight Fiber Metal Laminate using Jute, Kenaf and Aluminium [Volume 11, Issue 2, 2024, Pages 259-270]
  • Mahesh, Vishwas Feasibility Study on Application of Various MADM Approaches for Selection of Kenaf/Saw Dust Composite [Volume 12, Issue 1, 2025, Pages 13-24]
  • Mahmodzade Hoseyni, Seyed Ahmad Optimization of infinite composite plates with quasi-triangular holes under in-plane loading [Volume 5, Issue 2, 2018, Pages 115-130]
  • Mahmoodi, Masoud Using the Taguchi Method for Experimental and Numerical Investigations on the Square-Cup Deep-Drawing Process for Aluminum/Steel Laminated Sheets [Volume 4, Issue 2, 2017, Pages 169-177]
  • Malek-Mohammadi, Hosein Free Vibration and Buckling Analyses of Functionally Graded Nanocomposite Plates Reinforced by Carbon Nanotube [Volume 4, Issue 1, 2017, Pages 59-73]
  • Malguri, Akhilesh Numerical Investigation on Free Vibration Response of Bi-Directional Porous Functionally Graded Circular/Annular Plates [Volume 9, Issue 2, 2022, Pages 243-262]
  • Malguri, Akhilesh Initial Buckling Behavior of Elastically Supported Rectangular FGM Plate based on Higher Order Shear Deformation Theory via Spline RBF Method [Volume 11, Issue 1, 2024, Pages 59-72]
  • Mallik, Sadek Hossain Generalized Thermoelastic Interactions Using an Eigenvalue Technique in a Transversely Isotropic Unbounded Medium with Memory Having a Line Heat Source [Volume 11, Issue 2, 2024, Pages 413-424]
  • Mamnoun, Ehsan Vibration Analysis of Sandwich Beams with Magnetorheological Elastomer Core and FGM Graphene Nanoplatelet-Reinforced Polymer Faces on Viscoelastic Foundation [(Articles in Press)]
  • Manafi, S.A. The Structural and Mechanical Properties of Al-2.5%wt. B4C Met-al Matrix Nano-composite Fabricated by the Mechanical Alloying [Volume 2, Issue 1, 2015, Pages 39-44]
  • Manafi, S.A. Effect of Particle Size on the Structural and Mechanical Properties of Al–AlN Nanocomposites Fabricated by Mechanical Alloying [Volume 2, Issue 2, 2015, Pages 73-78]
  • Managheb, Seyyed Amir Mohammad Nonlocal Buckling and Vibration Analysis of Triple-Walled ZnO Piezoelectric Timoshenko Nano-beam Subjected to Magneto-Electro-Thermo-Mechanical Loadings [Volume 2, Issue 2, 2015, Pages 113-126]
  • Manjunath, Kuchangi Venkatappa Effect of Chilling & B4C content on Machining Efficiency and Surface Quality in Wire-Cut Machining of Aluminum Matrix Chilled Composites [Volume 11, Issue 2, 2024, Pages 341-350]
  • Marimuthu, Uthayakumar Optimization of AA6351-SiC-B4C Hybrid Composites in Wire EDM Using Grey Relation Technique [Volume 11, Issue 2, 2024, Pages 385-400]
  • Marimuthu, Uthayakumar Thrust Force and Delamination Analysis on Redmud-Filled Coconut Sheath Fiber Polyester Composite [Volume 12, Issue 1, 2025, Pages 43-52]
  • Mathivanan, Rajesh Effect of ON and OFF Axis Open Hole Tensile Testing of GFRP/Epoxy Composites [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 319-328]
  • Maurya, Madan Chandra Flexural Behaviour of Nanocomposite Plate with CNT Distribution and Agglomeration Effect [Volume 10, Issue 1, 2023, Pages 123-136]
  • Maurya, Madan Chandra Free Vibration Response of Agglomerated Carbon Nanotube-Reinforced Nanocomposite Plates [Volume 10, Issue 1, 2023, Pages 167-194]
  • Maurya, Madan Chandra Response of Agglomerated SWCNT Reinforced Nanocomposite Plate under Hygro-Thermal Loading [Volume 11, Issue 1, 2024, Pages 11-40]
  • Mazdak, Siamak Numerical Optimization of Non-destructive Ultrasonic Testing in Identifying Defects in Composite Structure of Pine Tree Trunk [Volume 11, Issue 1, 2024, Pages 249-258]
  • Mazdak, Siamak Parametric Investigation of Particle Movements in Ultrasonic Levitation Process Using Piezoelectric Materials [(Articles in Press)]
  • Meerasaheb, Koppanati Free Vibration Analysis of Simply Supported and Clamped Functionally Graded Rectangular Plate Using Coupled Displacement Field Method [Volume 12, Issue 1, 2025, Pages 73-84]
  • Mehdianfar, Pejman Static Buckling and Free Vibration Analysis of Bi-Dimensional FG Metal Ceramic Porous Beam [Volume 11, Issue 1, 2024, Pages 149-158]
  • Mehrabani, Mahboube Vibration Analysis of Circular Single-Layer Graphene Sheet Using Finite Element Method [Volume 6, Issue 2, 2019, Pages 131-138]
  • M.G.M., Sabri Green Anticorrosion Coating with Low VOCs Emission using Moringa Oleifera Leaves Extract [Volume 9, Issue 1, 2022, Pages 163-171]
  • Mierzwiński, Dariusz Optimization of AA6351-SiC-B4C Hybrid Composites in Wire EDM Using Grey Relation Technique [Volume 11, Issue 2, 2024, Pages 385-400]
  • Mirzaee, Omid A Case Study for Fabrication of MWCNT-TiO2 Hybrid Reinforced Aluminium Matrix Nanocomposites [Volume 1, Issue 2, 2014, Pages 107-111]
  • Mirzaee, Omid Evaluation of hardness and wear resistance of nano-sized titanium-carbide-reinforced commercially cast aluminum alloy matrices [Volume 5, Issue 1, 2018, Pages 75-81]
  • Mirzaee, Omid Investigation of Hardness, Morphology and Structural Analysis of NiCrBSi Composite Coating on Plain Carbon Steel [Volume 6, Issue 2, 2019, Pages 75-80]
  • Mirzaei, Jaber Design and Experimental/Numerical Analysis of Metal-Composite Vessel with Spherical Cap under Internal Pressure [Volume 10, Issue 2, 2023, Pages 247-256]
  • Mirzaei, Jaber Analyzing and Improving Flexural and Impact Strength of Composites Enhanced with Nanoparticles and Natural Fibers [Volume 11, Issue 2, 2024, Pages 467-482]
  • Mishra, Akshansh Quantum Machine Learning Approach for the Prediction of Surface Roughness in Additive Manufactured Specimens [(Articles in Press)]
  • Mitra, Anirban Maximization of Fundamental Frequency of Composite Stiffened Hypar Shell with Cutout by Taguchi Method [Volume 10, Issue 1, 2023, Pages 43-54]
  • Moazzeni, Mostafa Nonlocal Analysis of Longitudinal Dynamic Behavior of Nanobars with Surface Energy Effect [Volume 6, Issue 2, 2019, Pages 147-158]
  • Modiri, Bahman Large Deformation Elastic Analysis of Pressurized FGM Thick Cylindrical Shells with Nonlinear Plane Elasticity Theory (NPET) [Volume 12, Issue 1, 2025, Pages 129-140]
  • Mohammad Hosseini Mirzaei, Manouchehr Thermoelastic Analysis of a Functionally Graded Simple Blade Using First-Order Shear Deformation Theory [Volume 7, Issue 1, 2020, Pages 147-155]
  • Mohammadi, Hassan Isogeometric Free and Forced Vibration Analyses of FG-CNTs Plates based on a Logarithmic Higher-Order Shear Deformation Theory [Volume 8, Issue 2, 2021, Pages 435-453]
  • Mohammadi Barkchay, Amin Numerical Analysis of Thermal Buckling of Honeycomb Core Sandwich Panel under Thermal Loading [Volume 10, Issue 2, 2023, Pages 333-342]
  • Mohammadi-Fesharaki, Mohammad Distribution of Residual Stresses in Polymer Reinforced Carbon Nanotubes and Laminated Carbon Fibers [Volume 4, Issue 1, 2017, Pages 9-18]
  • Mohammadi Hooyeh, H. Size-dependent Effects on the Vibration Behavior of a Ti-moshenko Microbeam subjected to Pre-stress Loading based on DQM [Volume 3, Issue 2, 2016, Pages 99-112]
  • Mohammadimehr, M. Size-dependent Effects on the Vibration Behavior of a Ti-moshenko Microbeam subjected to Pre-stress Loading based on DQM [Volume 3, Issue 2, 2016, Pages 99-112]
  • Mohammadimehr, Mehdi Biaxial Buckling and Bending of Smart Nanocomposite Plate Reinforced by CNTs using Extended Mixture Rule Approach [Volume 1, Issue 1, 2014, Pages 17-26]
  • Mohammadimehr, Mehdi Nonlocal Buckling and Vibration Analysis of Triple-Walled ZnO Piezoelectric Timoshenko Nano-beam Subjected to Magneto-Electro-Thermo-Mechanical Loadings [Volume 2, Issue 2, 2015, Pages 113-126]
  • Mohammadimehr, Mehdi Static Bending, Vibration, and Buckling Responses of a Sandwich Beam Composed of Five Layers Considering Honeycomb Core and CNTRC with SMA Particles and Temperature-Dependent Material Properties Using SSDT [Volume 12, Issue 1, 2025, Pages 153-168]
  • Mohammad Panahiha, Hamid A New Three-Dimensional Refined Higher-Order Theory for Free Vibration Analysis of Composite Circular Cylindrical Shells [Volume 6, Issue 2, 2019, Pages 201-223]
  • Mohammad Panahiha, Hamid Buckling Analysis of Composite Grid-Stiffened Cylindrical Shells Using a Generalized Equivalent Single Layer Theory [Volume 8, Issue 2, 2021, Pages 455-466]
  • Mohammadrezazadeh, Shahin Active control of free and forced vibration of rotating laminated composite cylindrical shells embedded with magnetostrictive layers based on classical shell theory [Volume 7, Issue 2, 2020, Pages 355-369]
  • Mohammadrezazadeh, Shahin Nonlinear Vibration of Rotating Laminated Composite Cross-ply Cylindrical Shell on Nonlinear Rotating Elastic Foundation [Volume 9, Issue 2, 2022, Pages 317-334]
  • Mohammadrezazadeh, Shahin Vibration of MEE Composite Conical Shell Surrounded by Nonlinear Elastic Foundation Considering the Effect of Geometrical Nonlinearity [Volume 10, Issue 1, 2023, Pages 85-102]
  • Mohammad Younus, Althaf Experimental Investigation of Repair of Glass Epoxy Composite with Edge and Center Crack by Epoxy Resin [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 371-377]
  • Mohammadzadeh Gonabadi, Arash Improving the Performance of the Sandwich Panel with the Corrugated Core Filled with Metal Foam: Mathematical and Numerical Methods [Volume 6, Issue 2, 2019, Pages 249-261]
  • Mohandes, Masood Size-dependent Bending of Geometrically Nonlinear of Micro-Laminated Composite Beam based on Modified Couple Stress Theory [Volume 3, Issue 1, 2016, Pages 53-62]
  • Mohandes, Masood Discrepancies Between Free Vibration of FML and Composite Cylindrical Shells Reinforced by CNTs [Volume 6, Issue 2, 2019, Pages 105-115]
  • Mohsenimonfared, Hamid Free Vibration Analysis of 2D Functionally Graded Annular Plate considering the Effect of Material Composition via 2D Differential Quadrature Method [Volume 2, Issue 2, 2015, Pages 95-111]
  • Mokhtari, Madhid An Analytical Approach to Thermoelastic Bending of Simply Supported Advanced Ribbed Composite Plates [Volume 5, Issue 2, 2018, Pages 173-185]
  • Molla, Md Abul Kashim Generalized Thermoelastic Interactions Using an Eigenvalue Technique in a Transversely Isotropic Unbounded Medium with Memory Having a Line Heat Source [Volume 11, Issue 2, 2024, Pages 413-424]
  • Momeni-Khabisi, Hamed Mesh-free Dynamic Analyses of FGM Sandwich Plates Resting on A Pasternak Elastic Foundation [Volume 4, Issue 2, 2017, Pages 153-168]
  • Momohjimoh, Ibrahim Characterization of Thevetia Peruviana (Yellow Oleander) Shell Ash Powder as a Possible Filler in Polymer Composites [Volume 8, Issue 1, 2021, Pages 109-117]
  • Mondal, Samar Chandra Higher Order Approximations for Bending of FG Beams Using B-Spline Collocation Technique [Volume 11, Issue 1, 2024, Pages 159-176]
  • Montazeri, Amin Numerical Analysis of Thermal Buckling of Honeycomb Core Sandwich Panel under Thermal Loading [Volume 10, Issue 2, 2023, Pages 333-342]
  • Moradi, Mahdi Open-Hole Size and Thermal Cycling Effects on Mass Loss and Surface Degradation of Polymer Matrix Composites [Volume 4, Issue 2, 2017, Pages 111-116]
  • Moradi-dastjerdi, Rasool Free Vibration and Buckling Analyses of Functionally Graded Nanocomposite Plates Reinforced by Carbon Nanotube [Volume 4, Issue 1, 2017, Pages 59-73]
  • Moradi-dastjerdi, Rasool Mesh-free Dynamic Analyses of FGM Sandwich Plates Resting on A Pasternak Elastic Foundation [Volume 4, Issue 2, 2017, Pages 153-168]
  • Moradi Dastjerdi, R. Static and Free Vibration Analyses of Functionally Graded Nano-composite Plates Reinforced by Wavy Carbon Nanotubes Resting on a Pasternak Elastic Foundation [Volume 3, Issue 2, 2016, Pages 123-135]
  • Moradkhani, Alireza The Effect of Al Additive and Arc Melting Time on Synthesis of Ti3SiC2 MAX Phase using Ti/SiC/Al/Graphite [Volume 9, Issue 2, 2022, Pages 367-376]
  • Moradkhani, Alireza The Effect of Nano-B4C Additive on Microstructure and Mechanical Properties of Pressureless Sintering SiC Bodies [Volume 10, Issue 1, 2023, Pages 29-42]
  • Moradkhani, Alireza Effect of Microstructural Features and Al2O3 Doping on Aging Resistance, Mechanical Properties and Crack Propagation in 3Y-TZP Plate Ceramics for Dental Restorations: A Comprehensive Peridynamics Study [(Articles in Press)]
  • Moravej, M. Buckling Analysis of Functionally Graded Cylindrical Shells Under Mechanical and Thermal Loads by Dynamic Relaxation Method [Volume 7, Issue 2, 2020, Pages 297-311]
  • Moses, Nesasudha Patch antennas with PDMS substrate to detect tumors and their data transmission through ERPO-OFDM modulation technique in VLC [(Articles in Press)]
  • Motgi, Rakesh Tensile, Flexural and Impact strength analysis of a 3D printed Carbon Fiber Reinforced Nylon Filament [(Articles in Press)]
  • Motgi, Rakesh Lattice Structure Optimization of 3D Printed TPMS under Different Loading Conditions Using Regression Machine Learning [(Articles in Press)]
  • Mousavi, Arash Influence of Different Foaming Conditions on the Mechanical, Physical, and Structural Properties of Polypropylene Foam [Volume 6, Issue 2, 2019, Pages 225-237]
  • Mousavi, Sayed-Farhad Improving the Performance of Porous Concrete Composites Using Zeolite as a Coarse Grain [Volume 5, Issue 2, 2018, Pages 157-163]
  • Moyo, Ranganai Tawanda Stacking-Sequence Optimization and Buckling Analysis of Graphene/Fiber-Reinforced Laminated Plates [(Articles in Press)]
  • Mozafari, M. Size Effect on the Damaged Areas of Glass/Epoxy Structures under Low Velocity Impact [Volume 1, Issue 2, 2014, Pages 81-85]
  • Mozaffari, A Low-velocity Impact Response of Viscoelastic Composite Laminates Considering Large Deflection and Higher-order Shear Deformation [Volume 8, Issue 2, 2021, Pages 425-434]
  • Munde, Yashwant A Comparative Study of Machine Learning Techniques for Predicting Mechanical Properties of Fused Deposition Modelling (FDM)-Based 3D-Printed Wood/PLA Biocomposite [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 261-270]
  • Muneer Ahmed, Zhaib Experimental Investigation and Simulation of Electro-Mechanical Behaviour of Hybrid Sandwich Composite Radomes for Aerospace Applications [Volume 11, Issue 2, 2024, Pages 401-412]

N

  • N, Santhosh A Comparative Study on the Effect of HNT and Nano-Alumina Particles on the Mechanical Properties of Vacuum Bag Moulded Glass-Epoxy Nanocomposites [Volume 8, Issue 1, 2021, Pages 119-131]
  • Naderi, Ali Asghar Crashworthiness Study of an Innovative Helmet Liner Composed of an Auxetic Lattice Structure and PU Foam [Volume 9, Issue 1, 2022, Pages 25-35]
  • Naderi, Mahmood Study of Bond Strength between Polymer-Modified Mortars/Concrete and Their Mechanical Properties using “Friction-Transfer” and “Pull-off” Methods [Volume 8, Issue 1, 2021, Pages 171-184]
  • Naeinzadeh, Hadi Microstructure, Mechanical and Electrical Properties of Copper Matrix Composites Reinforced with Steel Nanoparticles [Volume 8, Issue 2, 2021, Pages 335-345]
  • Nagaral, Madeva Mechanical Characterization and Wear Behavior of Nano TiO2 Particulates Reinforced Al7075 Alloy Composites [Volume 7, Issue 1, 2020, Pages 71-78]
  • Nagaral, Madeva Effect of Ceramic Boron Carbide Particles Addition on the Mechanical and Microstructural Characteristics of Al7020 Alloy Composites [Volume 12, Issue 1, 2025, Pages 169-180]
  • Nagaral, Madeva Effect of Nickel Addition on the Coefficient of Thermal Expansion and Microstructural Characteristics of AA2024 and AA7175 Aluminum Alloys in As-Cast and Homogenized States [(Articles in Press)]
  • Naga Rani, Mukkala Free Vibration Analysis of Graphene Reinforced Laminated Composite Plates using Experimental Modal Testing [Volume 10, Issue 2, 2023, Pages 363-374]
  • Nagargoje, Aniket Ramnath Optimal Replacement of Glass Fabric with Carbon Fabric in Epoxy Matrix Composite [(Articles in Press)]
  • Nagoriya, Hemant Exploring Multi-Scale Thermal Behaviour in Pin-on-Disc Systems for Organic, Metallic, Ceramic, and Polymer Composites [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 305-317]
  • Naik, Nitin S. Higher-order Displacement Model for Cylindrical Bending of Laminated and Sandwich Plates Subjected to Environmental Loads [Volume 8, Issue 1, 2021, Pages 185-201]
  • Naik, Tejas Pramod Design and Development of a Pine Needle Briquetting Machine for the Uttarakhand Region of India [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 293-303]
  • Najafi, M. Accelerated Heat Aging Study of Phenolic/Basalt Fiber Reinforced Composites [Volume 3, Issue 1, 2016, Pages 1-7]
  • Najafi, Moslem Environmental Effects on Mechanical Properties of Glass/Epoxy and Fiber Metal Laminates, Part I: Hygrothermal Aging [Volume 4, Issue 3, 2017, Pages 187-196]
  • Najafi, Moslem Environmental effects on mechanical properties of glass/epoxy and fiber metal laminates, Part II: Isothermal aging [Volume 4, Issue 3, 2017, Pages 197-205]
  • Najafizadeh, Mohammad Mehdi High-order Analysis of Linear Vibrations of a ModeratleyThick Sandwich Panel With an Electrorheological Core [Volume 7, Issue 2, 2020, Pages 177-188]
  • Najibi, Amir Numerical Crashworthiness Analysis of Graded Layered Foam- Filled Tubes Under Axial Loading [Volume 6, Issue 1, 2019, Pages 57-64]
  • Narayanaswamy, Ananthi Modeling and Numerical Prediction on Mechanical Behaviors of Hybrid Fiber Reinforced Polymer Bio Composites Using Fuzzy Logic Algorithm [Volume 12, Issue 1, 2025, Pages 199-210]
  • Narmashiri, Kambiz Effects of Horizontal Deficiency Location on the Structural Behaviors of Steel SHS Short Columns Strengthened using CFRP [Volume 7, Issue 1, 2020, Pages 39-47]
  • Nasir, Muhammad Ali Experimental Investigation and Simulation of Electro-Mechanical Behaviour of Hybrid Sandwich Composite Radomes for Aerospace Applications [Volume 11, Issue 2, 2024, Pages 401-412]
  • Nasrollah, Amin Experimental Analysis of the Effect of Mechanical Topology on the Surface of Biological Microgripper Made of Ionic- Polymer Metal Composite Smart Material [(Articles in Press)]
  • Navazi, H. M. Dynamic Characteristics of Joined Steel and Carbon Fiber-Reinforced Plastic Tubes: Experimental and Numerical Investigation [Volume 4, Issue 2, 2017, Pages 88-97]
  • Nazemizadeh, mostafa Size-dependent Vibration Analysis of Non-uniform Mass Sensor Nanobeams [Volume 8, Issue 2, 2021, Pages 235-244]
  • Nazemnezhad, Reza Nonlocal Analysis of Longitudinal Dynamic Behavior of Nanobars with Surface Energy Effect [Volume 6, Issue 2, 2019, Pages 147-158]
  • Nazemnezhad, Reza A Novel Method for Considering Interlayer Effects between Graphene Nanoribbons and Elastic Medium in Free Vibration Analysis [Volume 7, Issue 1, 2020, Pages 79-88]
  • Nazemnezhad, Reza Nonlinear Torsional Vibration Analysis of Nanorods in the Presence of Surface Energy Effect: Multi-Mode Galerkin Method [Volume 9, Issue 2, 2022, Pages 229-242]
  • Nazemnezhad, Reza Longitudinal Vibration of Nanobeams by Two-Phase Local/Nonlocal Elasticity, Rayleigh Theory, and Generalized Differential Quadrature Method [Volume 10, Issue 2, 2023, Pages 221-232]
  • Nazemnezhad, Reza Nonlinear Torsional Vibration of Size-Dependent Functionally Graded Rods [Volume 11, Issue 1, 2024, Pages 41-58]
  • Nazemnezhad, Reza A Semi-Analytical Nonlinear Approach for Size-Dependent Analysis of Longitudinal Vibration in Terms of Axially Functionally Graded Nanorods [Volume 11, Issue 2, 2024, Pages 453-466]
  • Nejatbakhsh, Hossein Parametric Analysis of Position and Direction of Laminated Composite C-Spar on Aeroelastic Flutter in Aircraft Tail [Volume 11, Issue 2, 2024, Pages 351-362]
  • Nejati, Mohammad Free Vibration Analysis of 2D Functionally Graded Annular Plate considering the Effect of Material Composition via 2D Differential Quadrature Method [Volume 2, Issue 2, 2015, Pages 95-111]
  • Nejati, Mohammad Frequency Analysis of Functionally Graded Carbon Nanotube-reinforced Cylindrical Panels by Mesh-free Galerkin Method [Volume 8, Issue 2, 2021, Pages 415-424]
  • Nesasudha, M. S-Parameter Analysis of Three-Layered Aperture Coupled Antenna with a Flame Retardant-4 Composite Material as Substrate for Biomedical Applications [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 361-369]
  • Netiworaruksa, Benjamas Mechanical Properties of Hemp Fiber-Reinforced Polypropylene Composites for Drone Propeller Guard Application [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 271-277]
  • Nguyen, Ba-Duy Two-dimensional Elasticity Solutions For Analyzing Free Vibration Of Functionally Graded Porous Beams [Volume 12, Issue 1, 2025, Pages 235-248]
  • Nguyen, Thi Hoa Buckling and Nonlinear Vibration of Functionally Graded Porous Micro-beam Resting on Elastic Foundation [Volume 9, Issue 1, 2022, Pages 75-88]
  • Niknejad, Abbas Experimental Study on Double-Walled Copper and Carbon/Epoxy Composite Tubes under the Axial Loading [Volume 1, Issue 2, 2014, Pages 71-79]
  • Nomrawee, Pongsaphat The Impact of Fiber Architecture on the Mechanical Properties of Hand Lay-up Reinforced Polyester Resin [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 393-400]
  • Norouzifard, Vahid Microstructure, Mechanical and Electrical Properties of Copper Matrix Composites Reinforced with Steel Nanoparticles [Volume 8, Issue 2, 2021, Pages 335-345]
  • Nouri, Mohammad Cured Poly(ethylene-g-maleic anhydride)/Graphene Nanocomposite: Properties and Characterization [Volume 5, Issue 1, 2018, Pages 1-12]
  • Nouri Damghani, Mohammad Improving the Performance of the Sandwich Panel with the Corrugated Core Filled with Metal Foam: Mathematical and Numerical Methods [Volume 6, Issue 2, 2019, Pages 249-261]
  • Nouri Niyaraki, Meysam Design and Experimental/Numerical Analysis of Metal-Composite Vessel with Spherical Cap under Internal Pressure [Volume 10, Issue 2, 2023, Pages 247-256]
  • Nursabrina Mohd Nasir, Amirah Green Anticorrosion Coating with Low VOCs Emission using Moringa Oleifera Leaves Extract [Volume 9, Issue 1, 2022, Pages 163-171]

O

  • Ohab-Yazdi, Sayed Mohammad Kazem Application of Bi-Directional Functionally Graded Material Model for Free Vibration Analysis of Rotating Euler-Bernoulli Nanobeams [Volume 8, Issue 2, 2021, Pages 389-399]
  • Okafor, Christian Emeka The Graft of ANN-FEM Technique in Macro-mechanics of Multi-oriented Natural Fiber/Polyester Laminates [Volume 8, Issue 1, 2021, Pages 51-68]
  • Olad, Ali A Study of the Effect of TPU and Clay Nanoparticles on the Mechanical Behavior of PBT-Based Nanocomposites [Volume 4, Issue 3, 2017, Pages 179-186]
  • Omidi, Narges Experimental Investigation of FGM Dental Implant Properties Made from Ti/HA Composite [Volume 4, Issue 3, 2017, Pages 233-237]
  • Omidi Bidgoli, Mostafa A Case Study on the Influence of Friction Coefficient and Rotational Speed on Transient Thermoelastic Response of FGM Rotating Cylinder [Volume 9, Issue 2, 2022, Pages 399-408]
  • Omrani, Abdollah Investigation of Capsulated Epoxy and DCPD in Epoxy Based Self-healing Composites - DFT Calculation and Experimental Analysis [Volume 5, Issue 2, 2018, Pages 165-171]
  • Osipova, Victoriy Effect of the Nature of Oxide Nanofillers on Changes in the Mechanical Properties of Epoxy Coatings under Thermal Cycling [Volume 10, Issue 1, 2023, Pages 195-204]
  • Ouled Ahmed, R.B.A. Modeling of Hygrothermal Damage of Composite Materials [Volume 3, Issue 2, 2016, Pages 137-144]
  • Ouled Ahmed Ben Ali, Raja Springback Prediction of Sandwich Panel Using Machine Learning Methods [Volume 10, Issue 1, 2023, Pages 11-20]

P

  • P, Rajendra Effect of Nickel Addition on the Coefficient of Thermal Expansion and Microstructural Characteristics of AA2024 and AA7175 Aluminum Alloys in As-Cast and Homogenized States [(Articles in Press)]
  • Pagoli, M. Analytical Solution for Sound Radiation of Vibrating Circular Plates coupled with Piezo-electric Layers [Volume 3, Issue 2, 2016, Pages 89-98]
  • Pal, Jayantika Propagation Behavior of Love-Type Waves in a Poro-elastic Medium using Staggered Grid Finite Difference Scheme [Volume 8, Issue 2, 2021, Pages 359-365]
  • Palani, Geetha Thrust Force and Delamination Analysis on Redmud-Filled Coconut Sheath Fiber Polyester Composite [Volume 12, Issue 1, 2025, Pages 43-52]
  • Palekar, Shailesh P. XFEM for Fracture Analysis of Centrally Cracked Laminated Plates Subjected to Biaxial Loads [Volume 8, Issue 1, 2021, Pages 213-234]
  • Panahizadeh, Valiollah The Effect of Nano-B4C Additive on Microstructure and Mechanical Properties of Pressureless Sintering SiC Bodies [Volume 10, Issue 1, 2023, Pages 29-42]
  • Panahizadeh, Valiollah Effect of Microstructural Features and Al2O3 Doping on Aging Resistance, Mechanical Properties and Crack Propagation in 3Y-TZP Plate Ceramics for Dental Restorations: A Comprehensive Peridynamics Study [(Articles in Press)]
  • Pandey, Ayush Initial Buckling Behavior of Elastically Supported Rectangular FGM Plate based on Higher Order Shear Deformation Theory via Spline RBF Method [Volume 11, Issue 1, 2024, Pages 59-72]
  • Pandian, Pitchipoo Studies on Progress of Aluminum Based Composites for Automotive Applications and its Damping Characteristics – A Review [Volume 12, Issue 1, 2025, Pages 25-42]
  • Panneerselvam, Devi Modeling and Numerical Prediction on Mechanical Behaviors of Hybrid Fiber Reinforced Polymer Bio Composites Using Fuzzy Logic Algorithm [Volume 12, Issue 1, 2025, Pages 199-210]
  • Parhizkar Yaghoobi, Mohammad Electro-Elastic Analysis of Finite Length FGPM Cylinders Subjected to Electromechanical Loading Using First-Order Electric Potential Theory [Volume 8, Issue 1, 2021, Pages 15-31]
  • Parmar, Vijay Artificial Neural Network (ANN) Approach to Predict Tensile Properties of Longitudinally Placed Fiber Reinforced Polymeric Composites including Interphase [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 353-360]
  • Patel, Murlidhar Optimal Replacement of Glass Fabric with Carbon Fabric in Epoxy Matrix Composite [(Articles in Press)]
  • Patel, Shital Evaluation of Heat Resistance Characteristics of Fibrous Material for Cold Weather Application [Volume 11, Issue 1, 2024, Pages 231-238]
  • Patil, Santosh S. Finite Element Analysis of Mechanical Properties of Basalt-Carbon Epoxy Hybrid Laminates [Volume 9, Issue 2, 2022, Pages 263-274]
  • Patil, Vinayak Evaluation of Heat Resistance Characteristics of Fibrous Material for Cold Weather Application [Volume 11, Issue 1, 2024, Pages 231-238]
  • Paul, Lijo Multi-response Optimization while Drilling of Composite Laminate with Core Drill by Grey Entropy Fuzzy (GEF) Method [Volume 11, Issue 2, 2024, Pages 483-502]
  • Pavirala, Ritin Effect of ON and OFF Axis Open Hole Tensile Testing of GFRP/Epoxy Composites [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 319-328]
  • Payganeh, G. Static and Free Vibration Analyses of Functionally Graded Nano-composite Plates Reinforced by Wavy Carbon Nanotubes Resting on a Pasternak Elastic Foundation [Volume 3, Issue 2, 2016, Pages 123-135]
  • Peiravi, Mohammad Mohsen 3D Numerical Simulation of Fibers Arrangement Effects On Thermal Conductivity of Polymer Matrix Composite [Volume 9, Issue 1, 2022, Pages 59-73]
  • Pendhari, Sandeep Shivram Functionally Graded Piezoelectric Plates in Cylindrical Bending by Semi-analytical Approach [Volume 9, Issue 2, 2022, Pages 409-424]
  • Pendhari, Sandeep Shivram Quick Review and Assessment of Thermal Stress Analyses for Exact and Assumed Temperature Distribution for Composite and Sandwich Laminates [Volume 10, Issue 2, 2023, Pages 343-362]
  • Periyasamy, Pitchaipillai Microstructure & Mechanical Properties Evaluation of Al6082 /AlSi10Mg Composite for Light Weight Structural Applications [Volume 11, Issue 2, 2024, Pages 309-320]
  • Pestov, Aleksandr Effect of the Nature of Oxide Nanofillers on Changes in the Mechanical Properties of Epoxy Coatings under Thermal Cycling [Volume 10, Issue 1, 2023, Pages 195-204]
  • Piri, Farideh Synthesis and Characterization Al2O3/Novolac/Fiberglass Nanocomposite: Modification of Thermal Stability and Thermal Insulation Properties [Volume 10, Issue 1, 2023, Pages 21-28]
  • Piri, Farideh Preparation, Identification, and Evaluation of the Thermal Properties of Novolac Resins Modified with TiO2, MgO, and V2O5 Oxides [Volume 11, Issue 1, 2024, Pages 1-9]
  • Piriyakul, Keeratikan Enhancement of Compressive Strength in Cement Admixed Bangkok Clay with Glass Fiber and Bottom Ash for Eco-Friendly Functional Road Materials [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 279-292]
  • Pirouzi, Behrooz Effects of reinforcement distribution on the mechanical properties of Al–Fe3O4 nanocomposites fabricated via accumulative roll bonding [Volume 5, Issue 2, 2018, Pages 131-139]
  • Pitchaimani, Gopi Complementary Split Ring Resonator-Inspired Antenna for Wearable Multiband Applications Using Biodegradable Polylactic Acid [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 339-352]
  • Pitchipoo, Pandian A Review of Research Outcomes on Fabrication Methods and Investigations for Evaluating Fracture Behavior of Aluminum Metal Matrix Composites with its Applications [Volume 8, Issue 2, 2021, Pages 347-358]
  • Pochalard, Sakol Enhancement of Compressive Strength in Cement Admixed Bangkok Clay with Glass Fiber and Bottom Ash for Eco-Friendly Functional Road Materials [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 279-292]
  • Pouresmaeeli, Saleh Buckling Analysis of Spherical Composite Panels Reinforced by Carbon Nanotube [Volume 2, Issue 2, 2015, Pages 135-144]
  • Praburam, G. Optimization of Wear Behaviour on Mg-TiO2 Nanocomposite Using Taguchi Grey Relational Analysis [Volume 10, Issue 1, 2023, Pages 151-156]
  • Prachumchon, Chayapol Mechanical Properties of Hemp Fiber-Reinforced Polypropylene Composites for Drone Propeller Guard Application [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 271-277]
  • Pradhan, Atharva A. Finite Element Analysis of Mechanical Properties of Basalt-Carbon Epoxy Hybrid Laminates [Volume 9, Issue 2, 2022, Pages 263-274]
  • Pradhan, N. Nonlinear Bending Behavior of Functionally Graded Plates Combined with Active Fiber Composites under Thermal Environment [Volume 8, Issue 2, 2021, Pages 299-308]
  • Pramanik, Abhijit Analysis of Electrically Shorted and Open Cases on Love Waves Propagating in Piezoelectric Layer Embedded over a Fiber-Reinforced Substrate [Volume 12, Issue 1, 2025, Pages 1-12]
  • Prasad, Ram Bilas Vibration and Buckling Analysis of Skew Sandwich Plate using Radial Basis Collocation Method [Volume 10, Issue 2, 2023, Pages 383-392]
  • Prasad, Ram Bilas Bilas Meshfree Approach for the Torsional Analysis of Orthotropic and FGM Thin-Walled Open Sections [(Articles in Press)]
  • Prasoetsopha, Natkrita Mechanical Properties of Hemp Fiber-Reinforced Polypropylene Composites for Drone Propeller Guard Application [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 271-277]
  • Prasoetsopha, Natkrita The Impact of Fiber Architecture on the Mechanical Properties of Hand Lay-up Reinforced Polyester Resin [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 393-400]

Q

  • Qader, Ibrahim Nazem Multifunctional Properties of Metal Fibers Reinforced Polymer Composites – A Review [Volume 11, Issue 1, 2024, Pages 217-230]

R

  • R, Chandrashekar Effect of Nickel Addition on the Coefficient of Thermal Expansion and Microstructural Characteristics of AA2024 and AA7175 Aluminum Alloys in As-Cast and Homogenized States [(Articles in Press)]
  • R, Suresh A Comparative Study on the Effect of HNT and Nano-Alumina Particles on the Mechanical Properties of Vacuum Bag Moulded Glass-Epoxy Nanocomposites [Volume 8, Issue 1, 2021, Pages 119-131]
  • R., Sanjay M. Pandanus Tectorius Fiber/ Rice Husk Powder As Green Reinforcement For Lightweight Composites: Evaluation Of Impact Strength Properties And Thermal Stability [(Articles in Press)]
  • Rabieyan-Najafabadi, Hamid Parametric Analysis of Position and Direction of Laminated Composite C-Spar on Aeroelastic Flutter in Aircraft Tail [Volume 11, Issue 2, 2024, Pages 351-362]
  • Rafiee, Roham Predicting Young’s Modulus of Aggregated Carbon Nanotube Reinforced Polymer [Volume 1, Issue 1, 2014, Pages 9-16]
  • Rafiquzzaman, M. An Experimental and Numerical Approach of Polymer Composites Based on Jute-Bamboo Natural Fiber [Volume 9, Issue 1, 2022, Pages 105-113]
  • Rahi, Majid Transverse Vibration for Non-uniform Timoshenko Nano-beams [Volume 2, Issue 1, 2015, Pages 1-16]
  • Rahimi, A.S. Atomic Simulation of Temperature Effect on the Mechanical Properties of Thin Films [Volume 2, Issue 1, 2015, Pages 31-38]
  • Rahimi, Gholam Hosein Damage Energy Evaluation in [55/-55]9 Composite Pipes using Acoustic Emission Method [Volume 2, Issue 2, 2015, Pages 127-134]
  • Rahimi, Gholam Hosein Investigation into The Behavior of Nano-composite Tubes at Ballistic Impact [Volume 4, Issue 3, 2017, Pages 207-210]
  • Rahimi Sharbaf, Hamed Investigation into The Behavior of Nano-composite Tubes at Ballistic Impact [Volume 4, Issue 3, 2017, Pages 207-210]
  • Rahmani, A. Experimental Study on Dynamic Behavior of Acrylonitrile-Butadiene-Styrene (ABS) Based Nano Composite Reinforced by Nano Silica Addition [Volume 7, Issue 2, 2020, Pages 313-320]
  • Rahmani, Arash Vibration Characteristics of Functionally Graded Micro-Beam Carrying an Attached Mass [Volume 7, Issue 1, 2020, Pages 49-58]
  • Rahmani, Hossein Elastic analysis of Shrink-fitted Thick FGM Cylinders Based on Linear Plane Elasticity Theory [Volume 7, Issue 1, 2020, Pages 121-127]
  • Rahmani, Hossein Finite Difference Analysis of 2D Stress Wave Propagation in Two Dimensional Functionally Graded Ceramics-Metals Composites [Volume 8, Issue 2, 2021, Pages 321-334]
  • Rajab, Manal z The Effect of the Solvents on Electrical Properties of POT Conducting Polymer [Volume 8, Issue 2, 2021, Pages 283-289]
  • Rajabizadeh Mirakabad, S. Static and Free Vibration Analyses of Functionally Graded Nano-composite Plates Reinforced by Wavy Carbon Nanotubes Resting on a Pasternak Elastic Foundation [Volume 3, Issue 2, 2016, Pages 123-135]
  • Rajabpour, Morteza Compression Analysis of Hollow Cylinder Basalt Continuous Filament Epoxy Composite Filled with Shape Memory Wire [Volume 4, Issue 3, 2017, Pages 225-232]
  • Rajak, Basudeb Initial Buckling Behavior of Elastically Supported Rectangular FGM Plate based on Higher Order Shear Deformation Theory via Spline RBF Method [Volume 11, Issue 1, 2024, Pages 59-72]
  • Rajakarunakaran, Sivaprakasam A Review of Research Outcomes on Fabrication Methods and Investigations for Evaluating Fracture Behavior of Aluminum Metal Matrix Composites with its Applications [Volume 8, Issue 2, 2021, Pages 347-358]
  • Rajendran, Sundarakannan Thrust Force and Delamination Analysis on Redmud-Filled Coconut Sheath Fiber Polyester Composite [Volume 12, Issue 1, 2025, Pages 43-52]
  • Ramana, Maringanti Venkata Multi-response Optimization while Drilling of Composite Laminate with Core Drill by Grey Entropy Fuzzy (GEF) Method [Volume 11, Issue 2, 2024, Pages 483-502]
  • Ratchapakdee, Pongpun Effect of Annealing on Tensile Strength of 3D Printed PLA with Material Extrusion [(Articles in Press)]
  • Rawat, Devi Singh Integration of Artificial Neural Network and Taguchi Method for Prediction and Minimisation of Thick-Walled Polypropylene Gear Shrinkage [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 249-260]
  • Razavi, Soheil On the Buckling the Behavior of a Multiphase Smart Plate based on a Higher-order Theory [Volume 4, Issue 1, 2017, Pages 47-58]
  • Razavian Shad, Ehsan Nonlinear Torsional Vibration of Size-Dependent Functionally Graded Rods [Volume 11, Issue 1, 2024, Pages 41-58]
  • Reddy, B. S. Comparison of Deflection in Two-Directional Functionally Graded Tapered Beam [Volume 11, Issue 1, 2024, Pages 191-202]
  • Reddy, G. Chandra Mohana Free Vibration Analysis of 2D Functionally Graded Porous Beams Using Novel Higher-Order Theory [Volume 10, Issue 1, 2023, Pages 69-84]
  • Reddy, G. Chandra Mohana On Numerical Investigation of Buckling in Two-Directional Porous Functionally Graded Beam Using Higher Order Shear Deformation Theory [Volume 10, Issue 2, 2023, Pages 393-406]
  • Reddy, G. Chandra Mohana Comparison of Deflection in Two-Directional Functionally Graded Tapered Beam [Volume 11, Issue 1, 2024, Pages 191-202]
  • Reddy, K. V. K. Comparison of Deflection in Two-Directional Functionally Graded Tapered Beam [Volume 11, Issue 1, 2024, Pages 191-202]
  • Reddy, Mahadeva Effect of Chilling & B4C content on Machining Efficiency and Surface Quality in Wire-Cut Machining of Aluminum Matrix Chilled Composites [Volume 11, Issue 2, 2024, Pages 341-350]
  • Rexy, J Vibration in an Electrically Affected Hygro-magneto-thermo-flexo Electric Nanobeam Embedded in Winkler-Pasternak Foundation [Volume 8, Issue 2, 2021, Pages 401-414]
  • Rezaeepazhand, Jalil Experimental Study on Amine-Functionalized Carbon Nanotubes’ Effect on the Thermomechanical Properties of CNT/Epoxy Nano-composites [Volume 5, Issue 1, 2018, Pages 41-48]
  • Rezaeifar, Omid Damage Detection in Concrete Filled Tube Columns Based on Experimental Modal Data and Wavelet Technique [Volume 7, Issue 2, 2020, Pages 245-254]
  • Rezaei Qazviniha, Mohsen Synthesis and Characterization Al2O3/Novolac/Fiberglass Nanocomposite: Modification of Thermal Stability and Thermal Insulation Properties [Volume 10, Issue 1, 2023, Pages 21-28]
  • Rezaei Qazviniha, Mohsen Preparation, Identification, and Evaluation of the Thermal Properties of Novolac Resins Modified with TiO2, MgO, and V2O5 Oxides [Volume 11, Issue 1, 2024, Pages 1-9]
  • Rezvan Rostami, Reza Experimental Study on Surface Roughness and Cutting Force in Turning of Al7032 Reinforced with SiC Using Taguchi Design [Volume 8, Issue 1, 2021, Pages 69-76]
  • Rinawa, Motilal Mechanical Properties and Water Absorption of Epoxy Composites Reinforced with Treated Long Hair Fiber for Sustainable Manufacturing [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 379-392]
  • Rodbumrung, Anurak Mechanical Properties of Hemp Fiber-Reinforced Polypropylene Composites for Drone Propeller Guard Application [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 271-277]
  • Roghani, Mehran Mechanical Behavior and Optimization of Functionally Graded Hollow Cylinder with an Elliptic Hole [Volume 7, Issue 2, 2020, Pages 189-201]
  • Ronagh, Hamid-Reza Dynamic Stiffness Method for Free Vibration of Moderately Thick Functionally Graded Plates [Volume 3, Issue 1, 2016, Pages 15-30]
  • Rostamiyan, Y. An Analytical Study on Effects of adding Nanoparticles to Water and Enhancement in Thermal Properties Based on Falkner-Skan Model [Volume 1, Issue 1, 2014, Pages 27-35]
  • Rostamiyan, Yasser Investigation of Buckling Analysis of Epoxy/ Nanoclay/ Carbon Fiber Hybrid Laminated Nanocomposite: Using VARTM Technique for Preparation [Volume 3, Issue 1, 2016, Pages 63-71]
  • Rostamiyan, Yasser Improving Mechanical Properties of Nanocomposite-based Epoxy by High-impact Polystyrene and Multiwalled Carbon Nanotubes: Optimizing by a Mixture Design Approach [Volume 4, Issue 1, 2017, Pages 33-45]
  • Rostamiyan, Yasser Study on Compression and Flexural Behavior of ABS-SiO2 Poly-mer Matrix Composite Fabricated by Hot Extrusion [Volume 6, Issue 2, 2019, Pages 239-247]
  • Rostamiyan, Yasser Experimental Study on Dynamic Behavior of Acrylonitrile-Butadiene-Styrene (ABS) Based Nano Composite Reinforced by Nano Silica Addition [Volume 7, Issue 2, 2020, Pages 313-320]
  • Rostamiyan, Yasser Analytical and Numerical Solution of Heat Transfer Equation in Rectangular Composite Fins [Volume 9, Issue 1, 2022, Pages 199-211]
  • Rousta-Navi, Borhan Biaxial Buckling and Bending of Smart Nanocomposite Plate Reinforced by CNTs using Extended Mixture Rule Approach [Volume 1, Issue 1, 2014, Pages 17-26]
  • Roy, Aditya Optimal Replacement of Glass Fabric with Carbon Fabric in Epoxy Matrix Composite [(Articles in Press)]
  • Roychowdhury, Suparna Analysis of Electrically Shorted and Open Cases on Love Waves Propagating in Piezoelectric Layer Embedded over a Fiber-Reinforced Substrate [Volume 12, Issue 1, 2025, Pages 1-12]
  • Rudianto, Haris Metallurgical Assessment of Graphite Reinforced Al-Cu-Mg Nanocomposites Produced by the Shaker Mill Method [Volume 10, Issue 1, 2023, Pages 103-110]

S

  • S, Saranya Design and Analysis of Complementary Split Ring Resonator Based Low Profile Antenna Using Lightweight Polymers for Wireless, Radar, and Satellite Communication [(Articles in Press)]
  • Saadatfar, Mahdi Transient Solution of Heat and Moisture Transfer in a Functionally Graded Hollow Cylinder with Finite Length [Volume 9, Issue 1, 2022, Pages 49-57]
  • Saadatmand, Hossein Damage Energy Evaluation in [55/-55]9 Composite Pipes using Acoustic Emission Method [Volume 2, Issue 2, 2015, Pages 127-134]
  • Saberi Varzaneh, Ali Study of Bond Strength between Polymer-Modified Mortars/Concrete and Their Mechanical Properties using “Friction-Transfer” and “Pull-off” Methods [Volume 8, Issue 1, 2021, Pages 171-184]
  • Sadeghian, M. Buckling Analysis of Functionally Graded Cylindrical Shells Under Mechanical and Thermal Loads by Dynamic Relaxation Method [Volume 7, Issue 2, 2020, Pages 297-311]
  • Sadeghian, Mostafa Experimental and Numerical Study on the Strength of Repaired Steel Pipes with Composite Patches under Internal Pressure [Volume 10, Issue 2, 2023, Pages 437-448]
  • Sadeghian, Mostafa Large deflection analysis of graphene sheets in the thermal environment using higher-order nonlocal strain gradient principle [(Articles in Press)]
  • Sadeghinezhad, M. S. Thermoelastic Analysis of Compressor Spool in Turbojet Engine and Redesign it Using Functionally Graded Materials with Opti-mal Coefficients [Volume 6, Issue 2, 2019, Pages 167-179]
  • Sadeghzadeh, Sadegh Study of Laminated Composite MEMS and NEMS Performance in Nano Metric Operations [Volume 4, Issue 1, 2017, Pages 19-31]
  • Sadeghzadeh, Sadegh Geometric Effects on Nanopore Creation in Graphene and on the Impact-withstanding Efficiency of Graphene Nanosheets [Volume 5, Issue 1, 2018, Pages 91-102]
  • Sadeghzadeh, Sadegh Sensitivity Analysis of Fiber-Reinforced Lamina Micro-Electro-Mechanical Switches with Nonlinear Vibration Using a Higher Order Hamiltonian Approach [Volume 5, Issue 1, 2018, Pages 25-39]
  • Sadeghzadeh, Sadegh Vibration Analysis of Circular Single-Layer Graphene Sheet Using Finite Element Method [Volume 6, Issue 2, 2019, Pages 131-138]
  • Sadr, Mohammad Homayoun Vibration Optimization of Fiber-Metal Laminated Composite Shallow Shell Panels Using an Adaptive PSO Algorithm [Volume 4, Issue 2, 2017, Pages 99-110]
  • Safarabadi, Majid Numerical Analysis of Thermal Buckling of Honeycomb Core Sandwich Panel under Thermal Loading [Volume 10, Issue 2, 2023, Pages 333-342]
  • Safari, Mehrdad Stress Analysis of FGM Rotating Disk Subjected to Mechanical and Thermal Loads In Aircraft Gas Turbine Engine [Volume 7, Issue 1, 2020, Pages 1-13]
  • Safari Naderi, Mohammad Hadi Delamination Analysis in Composite Root of a Carbon-Layer Reinforced Wind Turbine Blade [Volume 6, Issue 1, 2019, Pages 9-18]
  • Saffari, Hadi Size-dependent Vibration Analysis of Non-uniform Mass Sensor Nanobeams [Volume 8, Issue 2, 2021, Pages 235-244]
  • Sahoo, Sarmila Maximization of Fundamental Frequency of Composite Stiffened Hypar Shell with Cutout by Taguchi Method [Volume 10, Issue 1, 2023, Pages 43-54]
  • Sahu, Rakesh Kumar Thermo–Elastic Stresses and Deformation Analysis of FG Rotating Hollow Spherical Body [Volume 9, Issue 1, 2022, Pages 125-136]
  • Saini, Kuldeep Active Vibration Control of Laminated Composite Beam Operating in Thermal Environment using PZT-5H Patches [Volume 9, Issue 2, 2022, Pages 387-398]
  • Sakiani, Hassan The Role of Natural Additives on the Wear and Friction Proper-ties of Nanocomposites for Friction Applications [Volume 6, Issue 2, 2019, Pages 159-165]
  • Salarkia, M.R. Size-dependent Effects on the Vibration Behavior of a Ti-moshenko Microbeam subjected to Pre-stress Loading based on DQM [Volume 3, Issue 2, 2016, Pages 99-112]
  • Salehi, Hamid Reza In Situ Formation of SiC/CNT Ceramic Nanocomposite by Phenolic Pyrolysis [Volume 1, Issue 2, 2014, Pages 87-96]
  • Salehi, Manouchehr In Situ Formation of SiC/CNT Ceramic Nanocomposite by Phenolic Pyrolysis [Volume 1, Issue 2, 2014, Pages 87-96]
  • Salehi Kolahi, Mohammad Reza Elastic analysis of Shrink-fitted Thick FGM Cylinders Based on Linear Plane Elasticity Theory [Volume 7, Issue 1, 2020, Pages 121-127]
  • Salhi, Madiha Thermomechanical and Physical Properties of Plaster Concrete Reinforced with Natural Fibers [Volume 10, Issue 2, 2023, Pages 295-308]
  • Salmaniannezhad, Hassan Synthesis and Characterization of MgF2/Cu Coating on Aluminum Produced by Sputtering Technique [Volume 9, Issue 2, 2022, Pages 297-302]
  • Salmaniannezhad, Hossein Synthesis and Characterization of MgF2/Cu Coating on Aluminum Produced by Sputtering Technique [Volume 9, Issue 2, 2022, Pages 297-302]
  • Samawati, Sadi Transient Thermal Stresses Analysis in a FPGM Cylinder [Volume 6, Issue 2, 2019, Pages 81-94]
  • Sanyal, Shubhashis An Investigation of Stress and Deformation Behavior of Functionally Graded Timoshenko Beams subjected to Thermo-Mechanical Load [Volume 7, Issue 1, 2020, Pages 157-176]
  • Sarangi, Saroj Kumar Nonlinear Bending Behavior of Functionally Graded Plates Combined with Active Fiber Composites under Thermal Environment [Volume 8, Issue 2, 2021, Pages 299-308]
  • Saranraj, R. Optimization of Wear Behaviour on Mg-TiO2 Nanocomposite Using Taguchi Grey Relational Analysis [Volume 10, Issue 1, 2023, Pages 151-156]
  • Sari, Nasmi Herlina Pandanus Tectorius Fiber/ Rice Husk Powder As Green Reinforcement For Lightweight Composites: Evaluation Of Impact Strength Properties And Thermal Stability [(Articles in Press)]
  • Sarkar, Susenjit Higher Order Approximations for Bending of FG Beams Using B-Spline Collocation Technique [Volume 11, Issue 1, 2024, Pages 159-176]
  • Savvafi, Saboor Investigation of Free Vibration in Fluid-Loaded Cylindrical Shells with a Three-Layer Sandwich Wall and an Auxetic Central Layer [Volume 12, Issue 1, 2025, Pages 53-72]
  • Sawarkar, Sameer Subhash Functionally Graded Piezoelectric Plates in Cylindrical Bending by Semi-analytical Approach [Volume 9, Issue 2, 2022, Pages 409-424]
  • Sayar, Hassan Health Monitoring for Composite under Low-Cycle Cyclic Loading, Considering Effects of Acoustic Emission Sensor Type [Volume 6, Issue 1, 2019, Pages 19-26]
  • Sayyad, Atteshamuddin S. A Quasi-3D Polynomial Shear and Normal Deformation Theory for Laminated Composite, Sandwich, and Functionally Graded Beams [Volume 4, Issue 2, 2017, Pages 139-152]
  • Sayyad, Atteshamuddin S. Bending, buckling and free vibration responses of hyperbolic shear deformable FGM beams [Volume 5, Issue 1, 2018, Pages 13-24]
  • Sayyad, Atteshamuddin S. Higher-order Displacement Model for Cylindrical Bending of Laminated and Sandwich Plates Subjected to Environmental Loads [Volume 8, Issue 1, 2021, Pages 185-201]
  • Sayyad, Atteshamuddin S. A New Higher-Order Shear and Normal Deformation Theory for the Free Vibration Analysis of Laminated Shells [Volume 9, Issue 1, 2022, Pages 89-104]
  • Sayyad, Atteshamuddin S. Static Flexure of Soft Core Sandwich Beams using Trigonometric Shear Deformation Theory [Volume 2, Issue 1, 2015, Pages 45-53]
  • Sedighi, Mohammad Experimental Investigation of FGM Dental Implant Properties Made from Ti/HA Composite [Volume 4, Issue 3, 2017, Pages 233-237]
  • Selahi, Ehsan Semi Analytical Transient Dynamic Analysis of Composite Adhesive Single-lap Joints [Volume 7, Issue 1, 2020, Pages 137-145]
  • Selvamani, R. Assessment of Hydrostatic Stress and Thermo Piezoelectricity in a Laminated Multilayered Rotating Hollow Cylinder [Volume 8, Issue 1, 2021, Pages 77-86]
  • Selvamani, Rajendran Vibration in an Electrically Affected Hygro-magneto-thermo-flexo Electric Nanobeam Embedded in Winkler-Pasternak Foundation [Volume 8, Issue 2, 2021, Pages 401-414]
  • Selvaraj, Hariharan Complementary Split Ring Resonator-Inspired Antenna for Wearable Multiband Applications Using Biodegradable Polylactic Acid [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 339-352]
  • Seth, Tanmoy Generalized Thermoelastic Interactions Using an Eigenvalue Technique in a Transversely Isotropic Unbounded Medium with Memory Having a Line Heat Source [Volume 11, Issue 2, 2024, Pages 413-424]
  • Seyedraoufi, Seyedmahdi Simulation and Optimization of Fatigue Life of Carbon-Epoxy Composite Sub Frame [Volume 9, Issue 1, 2022, Pages 37-47]
  • Shabani, Yasin Buckling Analysis of Sandwich Structures with Metamaterials Core Integrated by Graphene Nanoplatelets Reinforced Polymer Composite [Volume 10, Issue 1, 2023, Pages 1-10]
  • Shabani, Yasin Static Buckling and Free Vibration Analysis of Bi-Dimensional FG Metal Ceramic Porous Beam [Volume 11, Issue 1, 2024, Pages 149-158]
  • Shabani Ammari, Amin Effects of Horizontal Deficiency Location on the Structural Behaviors of Steel SHS Short Columns Strengthened using CFRP [Volume 7, Issue 1, 2020, Pages 39-47]
  • Shafaee Fallah, Azita Experimental and Numerical Study on the Strength of Repaired Steel Pipes with Composite Patches under Internal Pressure [Volume 10, Issue 2, 2023, Pages 437-448]
  • Shahbazi Karami, Javad An Investigation on Three-Point Bending of Foam-Filled Double Tubes and Parameter Optimization Using Response Surface Methodology [Volume 8, Issue 1, 2021, Pages 41-50]
  • Shahnazari, Mohammad Reza Capillary Effects on Surface Enhancement in a Non-Homogeneous Fibrous Porous Medium [Volume 5, Issue 1, 2018, Pages 83-90]
  • Shahrabi, A. Flexural Behavior of Fiber–Metal Laminates Reinforced with Surface-Functionalized Nanoclay [Volume 5, Issue 2, 2018, Pages 149-156]
  • Shahravi, Morteza An Analytical Approach to Thermoelastic Bending of Simply Supported Advanced Ribbed Composite Plates [Volume 5, Issue 2, 2018, Pages 173-185]
  • Shahriari, Behrooz Thermoelastic Analysis of Compressor Spool in Turbojet Engine and Redesign it Using Functionally Graded Materials with Opti-mal Coefficients [Volume 6, Issue 2, 2019, Pages 167-179]
  • Shahriari, Behrooz Stress Analysis of FGM Rotating Disk Subjected to Mechanical and Thermal Loads In Aircraft Gas Turbine Engine [Volume 7, Issue 1, 2020, Pages 1-13]
  • Shahriari, Behrooz Stress Analysis of the Rotating Carbon-Carbon Composite Disk of an Axial Compressor [Volume 10, Issue 2, 2023, Pages 271-282]
  • Shahryari, Mehran Numerical Analysis of Thermal Buckling of Honeycomb Core Sandwich Panel under Thermal Loading [Volume 10, Issue 2, 2023, Pages 333-342]
  • Shahsavari, Milad Numerical Investigation on Thermal Post-buckling Of Annular Sector Plates Made of FGM Via 3D Finite Element Method [Volume 8, Issue 2, 2021, Pages 309-320]
  • Shaikh, Asad A. Finite Element Analysis of Mechanical Properties of Basalt-Carbon Epoxy Hybrid Laminates [Volume 9, Issue 2, 2022, Pages 263-274]
  • Shakooeea, F. Synthesis and Characterization of Polymer/Nanosilicagel Nano-composites [Volume 4, Issue 1, 2017, Pages 1-8]
  • Shakouri, M. Dynamic Characteristics of Joined Steel and Carbon Fiber-Reinforced Plastic Tubes: Experimental and Numerical Investigation [Volume 4, Issue 2, 2017, Pages 88-97]
  • Shankara Reddy, R. Experimental and Numerical Analysis of Woven Bamboo and Jute Fiber Reinforced in Epoxy Composites [Volume 11, Issue 1, 2024, Pages 103-118]
  • Shanmugam, Suresh Kumar Optimization of AA6351-SiC-B4C Hybrid Composites in Wire EDM Using Grey Relation Technique [Volume 11, Issue 2, 2024, Pages 385-400]
  • Shanmugam, Vigneshwaran Thrust Force and Delamination Analysis on Redmud-Filled Coconut Sheath Fiber Polyester Composite [Volume 12, Issue 1, 2025, Pages 43-52]
  • Shariati, Mahmoud Experimental Study on Amine-Functionalized Carbon Nanotubes’ Effect on the Thermomechanical Properties of CNT/Epoxy Nano-composites [Volume 5, Issue 1, 2018, Pages 41-48]
  • Shariati, Mahmoud Large deflection analysis of graphene sheets in the thermal environment using higher-order nonlocal strain gradient principle [(Articles in Press)]
  • Shariati-Nia, Mostafa Modal Characteristics of Composite Beams with Single Delamination- A Simple Analytical Technique [Volume 1, Issue 2, 2014, Pages 97-106]
  • Sharifzadeh, Fatemeh Mechanical and Physical Properties of Glass-Fiber Reinforced Polymer Rods Manufactured by Different Pultrusion Methods [Volume 8, Issue 1, 2021, Pages 99-107]
  • Shariyat, Mohammad The Effects of the Moving Load and the Attached Mass-Spring-Damper System Interactions on the Dynamic Responses of the Composite Plates: An Analytical Approach [Volume 2, Issue 1, 2015, Pages 17-30]
  • Sharma, Apurbba Kumar Design and Development of a Pine Needle Briquetting Machine for the Uttarakhand Region of India [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 293-303]
  • Sharma, Harish Kumar Initial Buckling Behavior of Elastically Supported Rectangular FGM Plate based on Higher Order Shear Deformation Theory via Spline RBF Method [Volume 11, Issue 1, 2024, Pages 59-72]
  • Sharma, Ramesh Influence of Kevlar on Impact Damage Assessment of Carbon Fibre Hybrid Composite Laminate [(Articles in Press)]
  • Sheakholeslami, Mohammadreza Numerical Optimization of Non-destructive Ultrasonic Testing in Identifying Defects in Composite Structure of Pine Tree Trunk [Volume 11, Issue 1, 2024, Pages 249-258]
  • Sheakholeslami, Mohammadreza Parametric Investigation of Particle Movements in Ultrasonic Levitation Process Using Piezoelectric Materials [(Articles in Press)]
  • Sheikhi Azqandi, Mojtaba A Novel Hybrid Genetic Modified Colliding Bodies Optimization for Designing of Composite Laminates [Volume 8, Issue 1, 2021, Pages 203-212]
  • Shelesh-Nezhad, Karim A Study of the Effect of TPU and Clay Nanoparticles on the Mechanical Behavior of PBT-Based Nanocomposites [Volume 4, Issue 3, 2017, Pages 179-186]
  • Shelesh-Nezhad, Karim Numerical Simulation of a Hybrid Nanocomposite Containing Ca-CO3 and Short Glass Fibers Subjected to Tensile Loading [Volume 4, Issue 2, 2017, Pages 117-125]
  • Sheorey, Tanuja Integration of Artificial Neural Network and Taguchi Method for Prediction and Minimisation of Thick-Walled Polypropylene Gear Shrinkage [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 249-260]
  • Shinde, Bharti M. A Quasi-3D Polynomial Shear and Normal Deformation Theory for Laminated Composite, Sandwich, and Functionally Graded Beams [Volume 4, Issue 2, 2017, Pages 139-152]
  • Shinde, Bharti M. A New Higher-Order Shear and Normal Deformation Theory for the Free Vibration Analysis of Laminated Shells [Volume 9, Issue 1, 2022, Pages 89-104]
  • Shirdel, Hadi Optimization of Hybrid Composite Laminate Based on the Frequency using Imperialist Competitive Algorithm [Volume 1, Issue 1, 2014, Pages 37-48]
  • Shivaprasad, Veena Mechanical Characterization and Wear Behavior of Nano TiO2 Particulates Reinforced Al7075 Alloy Composites [Volume 7, Issue 1, 2020, Pages 71-78]
  • Shojaei, Keyvan Stress Analysis of the Rotating Carbon-Carbon Composite Disk of an Axial Compressor [Volume 10, Issue 2, 2023, Pages 271-282]
  • Shokrgozar, Mohammadreza Low-velocity Impact Response of Viscoelastic Composite Laminates Considering Large Deflection and Higher-order Shear Deformation [Volume 8, Issue 2, 2021, Pages 425-434]
  • Shokrian, Minoo Dokht Numerical Simulation of a Hybrid Nanocomposite Containing Ca-CO3 and Short Glass Fibers Subjected to Tensile Loading [Volume 4, Issue 2, 2017, Pages 117-125]
  • Shokrieh, M. Size Effect on the Damaged Areas of Glass/Epoxy Structures under Low Velocity Impact [Volume 1, Issue 2, 2014, Pages 81-85]
  • Shokrieh, Mahmood Mehrdad Mechanical Properties of Graphene/Epoxy Nanocomposites under Static and Flexural Fatigue Loadings [Volume 1, Issue 1, 2014, Pages 1-7]
  • Siadati, S.M.H. Flexural Behavior of Fiber–Metal Laminates Reinforced with Surface-Functionalized Nanoclay [Volume 5, Issue 2, 2018, Pages 149-156]
  • Siahpush, Ali Size-dependent Electro-Mechanical Vibration Analysis of FGPM Composite Plates using Modified Shear Deformation Theories [Volume 8, Issue 1, 2021, Pages 157-169]
  • Sid Amer, Youcef Failure Probability Analysis of Composite Pressure Tanks Using Subset Simulation [Volume 11, Issue 2, 2024, Pages 363-374]
  • Siddique, Abu Bakar Material Mechanical Properties Prediction of Layer with Multidirectional Fiber Ply Reinforced Polymer Matrix Composites [Volume 9, Issue 2, 2022, Pages 221-227]
  • Siengchin, Suchart Pandanus Tectorius Fiber/ Rice Husk Powder As Green Reinforcement For Lightweight Composites: Evaluation Of Impact Strength Properties And Thermal Stability [(Articles in Press)]
  • Singh, Dalbir Influence of Filler Content on the Mechanical, Thermal, Moisture Absorption, and Biodegradability Properties of Bionanocomposite with Cellulosic Fibers Derived from Delonix Regia Fruits [Volume 11, Issue 1, 2024, Pages 73-86]
  • Singh, Harpreet Integration of Artificial Neural Network and Taguchi Method for Prediction and Minimisation of Thick-Walled Polypropylene Gear Shrinkage [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 249-260]
  • Singh, Inderdeep Design and Development of a Pine Needle Briquetting Machine for the Uttarakhand Region of India [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 293-303]
  • Singh, Jeeoot A Meshfree Approach for Bending Analysis of Porous Rectangular FGM Plate Resting on Elastic Foundation [Volume 9, Issue 2, 2022, Pages 303-316]
  • Singh, Jeeoot Assessment of RBFs Based Meshfree Method for the Vibration Response of FGM Rectangular Plate Using HSDT Model [Volume 10, Issue 1, 2023, Pages 137-150]
  • Singh, Jigyasa A Meshfree Approach for Bending Analysis of Porous Rectangular FGM Plate Resting on Elastic Foundation [Volume 9, Issue 2, 2022, Pages 303-316]
  • Singh, Jigyasa Vibration and Buckling Analysis of Skew Sandwich Plate using Radial Basis Collocation Method [Volume 10, Issue 2, 2023, Pages 383-392]
  • Singh, Mukesh A Meshfree Approach for Bending Analysis of Porous Rectangular FGM Plate Resting on Elastic Foundation [Volume 9, Issue 2, 2022, Pages 303-316]
  • Singh, Rakesh Polyester/Kota Stone Dust Composite: A Comprehensive Investigation of Mechanical and Sliding Wear Properties [Volume 11, Issue 2, 2024, Pages 375-384]
  • SINGH, JEEOOT Meshfree Approach for the Torsional Analysis of Orthotropic and FGM Thin-Walled Open Sections [(Articles in Press)]
  • Singhal, Abhinav Analysis of SH-waves Propagating in Multiferroic Structure with Interfacial Imperfection [Volume 9, Issue 1, 2022, Pages 1-10]
  • Singsang, Witawat Mechanical Properties of Hemp Fiber-Reinforced Polypropylene Composites for Drone Propeller Guard Application [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 271-277]
  • Singsang, Witawat The Impact of Fiber Architecture on the Mechanical Properties of Hand Lay-up Reinforced Polyester Resin [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 393-400]
  • Sittitanadol, Ing-orn Mechanical Properties of Hemp Fiber-Reinforced Polypropylene Composites for Drone Propeller Guard Application [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 271-277]
  • Sittitanadol, Ing-orn The Impact of Fiber Architecture on the Mechanical Properties of Hand Lay-up Reinforced Polyester Resin [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 393-400]
  • Sivagangai, Thillaisekar Experimental Investigation of Repair of Glass Epoxy Composite with Edge and Center Crack by Epoxy Resin [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 371-377]
  • Sivaprakasam, Rajakarunakaran Studies on Progress of Aluminum Based Composites for Automotive Applications and its Damping Characteristics – A Review [Volume 12, Issue 1, 2025, Pages 25-42]
  • Sliman, Jemaa Thermomechanical and Physical Properties of Plaster Concrete Reinforced with Natural Fibers [Volume 10, Issue 2, 2023, Pages 295-308]
  • S.M., Syaizwadi Green Anticorrosion Coating with Low VOCs Emission using Moringa Oleifera Leaves Extract [Volume 9, Issue 1, 2022, Pages 163-171]
  • Smirnov, Sergey Effect of the Nature of Oxide Nanofillers on Changes in the Mechanical Properties of Epoxy Coatings under Thermal Cycling [Volume 10, Issue 1, 2023, Pages 195-204]
  • Smirnova, Evgeniy Effect of the Nature of Oxide Nanofillers on Changes in the Mechanical Properties of Epoxy Coatings under Thermal Cycling [Volume 10, Issue 1, 2023, Pages 195-204]
  • Sobhani, Manoochehr Microwave-Assisted Two-Step Sintering of Al/8wt%TiC Composite Prepared by Powder Metallurgy [Volume 8, Issue 2, 2021, Pages 291-298]
  • Sohani, Mohammad Hossein Large Deformation Elastic Analysis of Pressurized FGM Thick Cylindrical Shells with Nonlinear Plane Elasticity Theory (NPET) [Volume 12, Issue 1, 2025, Pages 129-140]
  • Soheil Shamaee, Mahsa Minimal Mass and Maximal Buckling Load of Composite Hexagonal-Triangle Grid Structure using FSDT under External Hydrostatic Pressure [Volume 10, Issue 2, 2023, Pages 309-318]
  • Soheil Shamaee, Mahsa A Comprehensive Comparison between Multi-Objective Optimization Methods for Composite Hexagonal-Triangle Grid Structure using FSDT under External Hydrostatic Pressure [Volume 11, Issue 1, 2024, Pages 177-190]
  • Sohrabi, Habib Using the Taguchi Method for Experimental and Numerical Investigations on the Square-Cup Deep-Drawing Process for Aluminum/Steel Laminated Sheets [Volume 4, Issue 2, 2017, Pages 169-177]
  • Solanki, Bikram Singh Integration of Artificial Neural Network and Taguchi Method for Prediction and Minimisation of Thick-Walled Polypropylene Gear Shrinkage [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 249-260]
  • Soleimanian, Sina Theoretical, numerical, and experimental analyses of free vibrations of glass fiber reinforced polymer plates with central cutouts and free boundaries [Volume 5, Issue 1, 2018, Pages 67-74]
  • Soleimanian, Sina Thermal Buckling and Thermal Induced free Vibration Analysis of Perforated Composite Plates: a Mathematical Model [Volume 7, Issue 1, 2020, Pages 15-23]
  • Soleimanimehr, Hamid Experimental Analysis of the Effect of Mechanical Topology on the Surface of Biological Microgripper Made of Ionic- Polymer Metal Composite Smart Material [(Articles in Press)]
  • Soltani, Masoumeh Finite Element Modeling for Buckling Analysis of Tapered Axially Functionally Graded Timoshenko Beam on Elastic Foundation [Volume 7, Issue 2, 2020, Pages 203-218]
  • Soltani, Masoumeh A Novel Approach for Lateral Buckling Assessment of Double Tapered Thin-Walled Laminated Composite I-Beams [Volume 9, Issue 1, 2022, Pages 11-23]
  • Soltani, Masoumeh Buckling Analysis of Sandwich Timoshenko Nanobeams with AFG Core and Two Metal Face-Sheets [Volume 10, Issue 2, 2023, Pages 319-332]
  • Soltani, Mohammad-Reza Dynamic Stiffness Method for Free Vibration of Moderately Thick Functionally Graded Plates [Volume 3, Issue 1, 2016, Pages 15-30]
  • Soltanimaleki, Arman Frequency Analysis of Functionally Graded Carbon Nanotube-reinforced Cylindrical Panels by Mesh-free Galerkin Method [Volume 8, Issue 2, 2021, Pages 415-424]
  • Sondhi, Lakshman Thermo–Elastic Stresses and Deformation Analysis of FG Rotating Hollow Spherical Body [Volume 9, Issue 1, 2022, Pages 125-136]
  • Soroush, Majid Free Vibration Analysis of Combined Cylindrical-Conical Composite Shells using First-Order Shear Deformation Theory [Volume 8, Issue 2, 2021, Pages 269-282]
  • Srinivasa, Chikkol V. Experimental and Finite Element Studies on Free Vibration of Areca Leaf Sheath Reinforced Polymer Composites [Volume 8, Issue 2, 2021, Pages 367-388]
  • Srinivasan, saranya Complementary Split Ring Resonator-Inspired Antenna for Wearable Multiband Applications Using Biodegradable Polylactic Acid [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 339-352]
  • Srivastava, Manish Chand Assessment of RBFs Based Meshfree Method for the Vibration Response of FGM Rectangular Plate Using HSDT Model [Volume 10, Issue 1, 2023, Pages 137-150]
  • Srivastava, Yash Initial Buckling Behavior of Elastically Supported Rectangular FGM Plate based on Higher Order Shear Deformation Theory via Spline RBF Method [Volume 11, Issue 1, 2024, Pages 59-72]
  • Subbarayan, Sathiyamurthy Modeling and Numerical Prediction on Mechanical Behaviors of Hybrid Fiber Reinforced Polymer Bio Composites Using Fuzzy Logic Algorithm [Volume 12, Issue 1, 2025, Pages 199-210]
  • Subramanyam, Burlakanti Microstructure & Mechanical Properties Evaluation of Al6082 /AlSi10Mg Composite for Light Weight Structural Applications [Volume 11, Issue 2, 2024, Pages 309-320]
  • Sultana, Mafruza Analysis of SH-waves Propagating in Multiferroic Structure with Interfacial Imperfection [Volume 9, Issue 1, 2022, Pages 1-10]
  • Sundaram, Kathiravan Studies on Progress of Aluminum Based Composites for Automotive Applications and its Damping Characteristics – A Review [Volume 12, Issue 1, 2025, Pages 25-42]
  • Sundaresan, Thirumalai Kumaran Optimization of AA6351-SiC-B4C Hybrid Composites in Wire EDM Using Grey Relation Technique [Volume 11, Issue 2, 2024, Pages 385-400]
  • Sur, Abhik Elasto-Thermodiffusive Response in a Two-Dimensional Transversely Isotropic Medium [Volume 6, Issue 2, 2019, Pages 95-104]
  • Sur, Abhik Thermoelastic Interaction in a Three-Dimensional Layered Sandwich Structure [Volume 5, Issue 2, 2018, Pages 187-198]
  • Swamy, Deepak Influence of Kevlar on Impact Damage Assessment of Carbon Fibre Hybrid Composite Laminate [(Articles in Press)]

T

  • Tabaghi, Armi Deposition of an Al/SiC Composite Coating on Steel by Friction Surfacing: Corrosion and Wear Properties [Volume 9, Issue 2, 2022, Pages 287-296]
  • Tabakov, Pavel Y Stacking-Sequence Optimization and Buckling Analysis of Graphene/Fiber-Reinforced Laminated Plates [(Articles in Press)]
  • Tabatabaeian, Ali Buckling analysis of FML cylindrical shells under combined axial and torsional loading [Volume 7, Issue 2, 2020, Pages 263-270]
  • Tadi Beni, Yaghub Frequency Analysis of Functionally Graded Carbon Nanotube-reinforced Cylindrical Panels by Mesh-free Galerkin Method [Volume 8, Issue 2, 2021, Pages 415-424]
  • Taghipoor, Hossein Analyzing and Improving Flexural and Impact Strength of Composites Enhanced with Nanoparticles and Natural Fibers [Volume 11, Issue 2, 2024, Pages 467-482]
  • Taheri, Moein Sensitivity Analysis of Vibrating Laminated Composite Rec-tangular Plates in Interaction with Inviscid Fluid Using EFAST Method [Volume 7, Issue 2, 2020, Pages 219-231]
  • Taheri, Moein Size-dependent Vibration Analysis of Non-uniform Mass Sensor Nanobeams [Volume 8, Issue 2, 2021, Pages 235-244]
  • Taherian, Z. The Effect of Processing Conditions on the Mechanical Properties of Polypropylene/Mesoporous Silica-Hydroxyapatite Hybrid Nanocomposites [Volume 3, Issue 2, 2016, Pages 73-82]
  • Taheri-Behrooz, F. Size Effect on the Damaged Areas of Glass/Epoxy Structures under Low Velocity Impact [Volume 1, Issue 2, 2014, Pages 81-85]
  • Tahouneh, Vahid A Semi-analytical Solution for 3-D Dynamic Analysis of Thick Continuously Graded Carbon Nanotube-reinforced Annular Plates Resting on a Two-parameter Elastic Foundation [Volume 1, Issue 2, 2014, Pages 113-130]
  • Tahouneh, Vahid Three-dimensional elasticity solution for vibrational analysis of thick continuously graded sandwich plates with different boundary conditions using a two-parameter micromechanical model for agglomeration [Volume 5, Issue 1, 2018, Pages 49-66]
  • Tajali, Mohammad Synthesis and Characterization of Polymer/Nanosilicagel Nano-composites [Volume 4, Issue 1, 2017, Pages 1-8]
  • Takhayor Ardestani, Masoud The Effect of Temperature Dependency on the Thermo-Electro-Elastic Analysis of Functionally Graded Piezoelectric Spherical Shell [Volume 6, Issue 1, 2019, Pages 1-8]
  • Talebi, Amir Microstructure, Mechanical and Electrical Properties of Copper Matrix Composites Reinforced with Steel Nanoparticles [Volume 8, Issue 2, 2021, Pages 335-345]
  • Talebitoot, Roohollah Simulation and Optimization of Fatigue Life of Carbon-Epoxy Composite Sub Frame [Volume 9, Issue 1, 2022, Pages 37-47]
  • Tamboli, Shahid Tensile, Flexural and Impact strength analysis of a 3D printed Carbon Fiber Reinforced Nylon Filament [(Articles in Press)]
  • Tamboli, Shahid Lattice Structure Optimization of 3D Printed TPMS under Different Loading Conditions Using Regression Machine Learning [(Articles in Press)]
  • Tarahomi, S. The Effect of Processing Conditions on the Mechanical Properties of Polypropylene/Mesoporous Silica-Hydroxyapatite Hybrid Nanocomposites [Volume 3, Issue 2, 2016, Pages 73-82]
  • Tavakoli, Hossein Deposition of an Al/SiC Composite Coating on Steel by Friction Surfacing: Corrosion and Wear Properties [Volume 9, Issue 2, 2022, Pages 287-296]
  • Tee, Kong Fah Failure Probability Analysis of Composite Pressure Tanks Using Subset Simulation [Volume 11, Issue 2, 2024, Pages 363-374]
  • Thakur, Ajaykumar Geometrically Nonlinear Analysis of Laminated Composite Plates subjected to Uniform Distributed Load Using a New Hypothesis: the finite element method (FEM) Approach [Volume 7, Issue 2, 2020, Pages 271-285]
  • Thavittupalayam Angappana, Karthikeyan Patch antennas with PDMS substrate to detect tumors and their data transmission through ERPO-OFDM modulation technique in VLC [(Articles in Press)]
  • Thawait, Amit Kumar Thermo–Elastic Stresses and Deformation Analysis of FG Rotating Hollow Spherical Body [Volume 9, Issue 1, 2022, Pages 125-136]
  • Tizfahm, Akbar Low-velocity Impact Response of Viscoelastic Composite Laminates Considering Large Deflection and Higher-order Shear Deformation [Volume 8, Issue 2, 2021, Pages 425-434]
  • Torabi, Keivan Transverse Vibration for Non-uniform Timoshenko Nano-beams [Volume 2, Issue 1, 2015, Pages 1-16]
  • Torabi, Keyvan Modal Characteristics of Composite Beams with Single Delamination- A Simple Analytical Technique [Volume 1, Issue 2, 2014, Pages 97-106]
  • Torabizadeh, Mohammad Amin A Numerical and Analytical Solution for the Free Vibration of Laminated Composites Using Different Plate Theories [Volume 4, Issue 1, 2017, Pages 75-87]
  • Torabizadeh, Mohammad Amin Low-Velocity Impact Behavior of Foam Core Sandwich Panels with Different Face Sheet Layers: Numerical and Experimental Study [Volume 10, Issue 1, 2023, Pages 111-122]
  • T S, Mohan Kumar Comparative study on impact responses of sandwich composites with stiff and compliant core materials [(Articles in Press)]

U

  • Usman, Mohammed Characterization of Thevetia Peruviana (Yellow Oleander) Shell Ash Powder as a Possible Filler in Polymer Composites [Volume 8, Issue 1, 2021, Pages 109-117]

V

  • V, Emilda Irudhaya Mari Design and Analysis of Complementary Split Ring Resonator Based Low Profile Antenna Using Lightweight Polymers for Wireless, Radar, and Satellite Communication [(Articles in Press)]
  • V., Murari Crashworthy Behavior of Plain Weave Glass/Epoxy Composite Tubes Containing Different Extents of Overlap of Dropped Plies [Volume 11, Issue 1, 2024, Pages 87-102]
  • Vaezi, Mehdi Experimental Investigation on Quasi-Static Impact Response of Glass/Epoxy Composite Corrugated Core Sandwich Panels [Volume 10, Issue 2, 2023, Pages 283-294]
  • Vahabi Meibodi, Mohammad Hossein Experimental Study of Buckling of Reinforced Conical Composite Shell Under Hydrostatic Loading [Volume 9, Issue 2, 2022, Pages 359-366]
  • Vahedi, Sh. Flexural Behavior of Fiber–Metal Laminates Reinforced with Surface-Functionalized Nanoclay [Volume 5, Issue 2, 2018, Pages 149-156]
  • Valukula, Balaraj Effect of Ceramic Boron Carbide Particles Addition on the Mechanical and Microstructural Characteristics of Al7020 Alloy Composites [Volume 12, Issue 1, 2025, Pages 169-180]
  • Vasara, Dilsukh Numerical Investigation on Free Vibration Response of Bi-Directional Porous Functionally Graded Circular/Annular Plates [Volume 9, Issue 2, 2022, Pages 243-262]
  • Vashishtha, Govind Bearing Response Prediction in Hydrothermal Aged Carbon Fiber Reinforced Epoxy Composite Joints Using Machine Learning Techniques [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 329-338]
  • Veeramallu, Kalyanamanohar Experimental Modal Analysis of Viscoelastic Sandwich Structures [Volume 12, Issue 1, 2025, Pages 181-198]
  • Veerasimman, Arumugaprabu Thrust Force and Delamination Analysis on Redmud-Filled Coconut Sheath Fiber Polyester Composite [Volume 12, Issue 1, 2025, Pages 43-52]
  • Venkatalakshmi, Nathi Free Vibration Analysis of Simply Supported and Clamped Functionally Graded Rectangular Plate Using Coupled Displacement Field Method [Volume 12, Issue 1, 2025, Pages 73-84]
  • Veretennikova, Irina Effect of the Nature of Oxide Nanofillers on Changes in the Mechanical Properties of Epoxy Coatings under Thermal Cycling [Volume 10, Issue 1, 2023, Pages 195-204]
  • Vijayalakshmi, Anitha Patch antennas with PDMS substrate to detect tumors and their data transmission through ERPO-OFDM modulation technique in VLC [(Articles in Press)]
  • Visariya, Jainil Quick Review and Assessment of Thermal Stress Analyses for Exact and Assumed Temperature Distribution for Composite and Sandwich Laminates [Volume 10, Issue 2, 2023, Pages 343-362]
  • Viswanathan, Vinoth Modeling and Numerical Prediction on Mechanical Behaviors of Hybrid Fiber Reinforced Polymer Bio Composites Using Fuzzy Logic Algorithm [Volume 12, Issue 1, 2025, Pages 199-210]
  • Vora, Tanmay Quick Review and Assessment of Thermal Stress Analyses for Exact and Assumed Temperature Distribution for Composite and Sandwich Laminates [Volume 10, Issue 2, 2023, Pages 343-362]
  • Vossough, Ali Reza Nonlinear Magneto-Nonlocal Vibration Analysis of Coupled Piezoelectric Micro-Plates Reinforced with Agglomerated CNTs [Volume 7, Issue 1, 2020, Pages 109-119]
  • Vossough, Hossein Nonlinear Magneto-Nonlocal Vibration Analysis of Coupled Piezoelectric Micro-Plates Reinforced with Agglomerated CNTs [Volume 7, Issue 1, 2020, Pages 109-119]
  • Vyas, Chandreshkumar Jayantilal Mechanical Characterization of Glass-Basalt Hybrid Composites with Different Fiber Weight Fraction [Volume 11, Issue 2, 2024, Pages 295-308]

W

  • Walter, Janusz Optimization of AA6351-SiC-B4C Hybrid Composites in Wire EDM Using Grey Relation Technique [Volume 11, Issue 2, 2024, Pages 385-400]
  • W.A.W., Rafizah Green Anticorrosion Coating with Low VOCs Emission using Moringa Oleifera Leaves Extract [Volume 9, Issue 1, 2022, Pages 163-171]
  • W.M.K.W.M., Ikhmal Green Anticorrosion Coating with Low VOCs Emission using Moringa Oleifera Leaves Extract [Volume 9, Issue 1, 2022, Pages 163-171]
  • W.N.W.M., Norsani Green Anticorrosion Coating with Low VOCs Emission using Moringa Oleifera Leaves Extract [Volume 9, Issue 1, 2022, Pages 163-171]
  • Wungsumpow, Chalermpon Enhancement of Compressive Strength in Cement Admixed Bangkok Clay with Glass Fiber and Bottom Ash for Eco-Friendly Functional Road Materials [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 279-292]

Y

  • Yadav, Jitendra Thermo-Mechanical and Wear Properties of Natural Fiber-Reinforced Epoxy Composites for Structural Applications [Volume 12, Issue 1, 2025, Pages 141-152]
  • YAKOUBI, Hadja / Modeling aeroelastic vibration dampening in wind turbine blades using piezoelectric materials [(Articles in Press)]
  • Yang, Yo-Lun Thrust Force and Delamination Analysis on Redmud-Filled Coconut Sheath Fiber Polyester Composite [Volume 12, Issue 1, 2025, Pages 43-52]
  • Yas, Mohammad Hossein Dynamic and Buckling Analysis of Hybrid Composite Beam Strengthened with Carbon Fibers/Aramid Fibers under Temperature Gradient [Volume 11, Issue 1, 2024, Pages 203-216]
  • Younesi, Adel Damage Detection in Concrete Filled Tube Columns Based on Experimental Modal Data and Wavelet Technique [Volume 7, Issue 2, 2020, Pages 245-254]
  • Yousefi, Ali-Akbar On the Study of Mechanical Properties of Aluminum/Nano-Alumina Composites Produced via Powder Injection Molding [Volume 3, Issue 1, 2016, Pages 45-51]
  • Yousefi, Peyman High-order Analysis of Linear Vibrations of a ModeratleyThick Sandwich Panel With an Electrorheological Core [Volume 7, Issue 2, 2020, Pages 177-188]
  • Yousefi, Shahram Thermoelastic Analysis of Compressor Spool in Turbojet Engine and Redesign it Using Functionally Graded Materials with Opti-mal Coefficients [Volume 6, Issue 2, 2019, Pages 167-179]
  • Yousefpoar, Mardali Synthesis and Characterization of Polymer/Nanosilicagel Nano-composites [Volume 4, Issue 1, 2017, Pages 1-8]

Z

  • Zahedan, Nima Experimental and Numerical Investigation on the Flexural Behavior of Composite-Reinforced Top-Hat Shape Beam [Volume 8, Issue 1, 2021, Pages 149-156]
  • Zaim, Abelnour Experimental and Numerical Analyses of Alfa/Polyester Composite Under Three-Point Bending [Volume 12, Issue 1, 2025, Pages 211-222]
  • Zamani, Jamal Experimental Study of Buckling of Reinforced Conical Composite Shell Under Hydrostatic Loading [Volume 9, Issue 2, 2022, Pages 359-366]
  • Zamani, Mohammad Reza Theoretical, numerical, and experimental analyses of free vibrations of glass fiber reinforced polymer plates with central cutouts and free boundaries [Volume 5, Issue 1, 2018, Pages 67-74]
  • Zamani, Mohammad Reza Thermal Buckling and Thermal Induced free Vibration Analysis of Perforated Composite Plates: a Mathematical Model [Volume 7, Issue 1, 2020, Pages 15-23]
  • Zamani, M.R. Free Vibration of Lattice Cylindrical Composite Shell Reinforced with Carbon Nano-tubes [Volume 2, Issue 1, 2015, Pages 61-72]
  • Zamani, M.R. The Effect of External Skin on Buckling Strength of Composite Lattice Cylinders Based on Numerical and Experimental Analysis [Volume 3, Issue 2, 2016, Pages 83-87]
  • Zannat, M. An Experimental and Numerical Approach of Polymer Composites Based on Jute-Bamboo Natural Fiber [Volume 9, Issue 1, 2022, Pages 105-113]
  • Zarei, Hamidreza Design and Experimental/Numerical Analysis of Metal-Composite Vessel with Spherical Cap under Internal Pressure [Volume 10, Issue 2, 2023, Pages 247-256]
  • Zeighami, Vahid Buckling Analysis of Nano Composite Plates Based on Combination of the Incremental Load Technique and Dynamic Relaxation Method [Volume 8, Issue 1, 2021, Pages 133-148]
  • Zeighami Salimabad, Mehdi Numerical Optimization of Non-destructive Ultrasonic Testing in Identifying Defects in Composite Structure of Pine Tree Trunk [Volume 11, Issue 1, 2024, Pages 249-258]
  • Ziadan, K. M. The Effect of the Solvents on Electrical Properties of POT Conducting Polymer [Volume 8, Issue 2, 2021, Pages 283-289]
  • Zobeid, Sadegh Investigation of Free Vibration in Fluid-Loaded Cylindrical Shells with a Three-Layer Sandwich Wall and an Auxetic Central Layer [Volume 12, Issue 1, 2025, Pages 53-72]