Keyword Index

A

  • Abaqus analysis Delamination Analysis in Composite Root of a Carbon-Layer Reinforced Wind Turbine Blade [Volume 6, Issue 1, 2019, Pages 9-18]
  • Accelerated heat aging Accelerated Heat Aging Study of Phenolic/Basalt Fiber Reinforced Composites [Volume 3, Issue 1, 2016, Pages 1-7]
  • Accumulative roll bonding Effects of reinforcement distribution on the mechanical properties of Al–Fe3O4 nanocomposites fabricated via accumulative roll bonding [Volume 5, Issue 2, 2018, Pages 131-139]
  • Acoustic emission Damage Energy Evaluation in [55/-55]9 Composite Pipes using Acoustic Emission Method [Volume 2, Issue 2, 2015, Pages 127-134]
  • Acoustic emission Health Monitoring for Composite under Low-Cycle Cyclic Loading, Considering Effects of Acoustic Emission Sensor Type [Volume 6, Issue 1, 2019, Pages 19-26]
  • Acrylonitrile Butadiene Styrene Study on Compression and Flexural Behavior of ABS-SiO2 Poly-mer Matrix Composite Fabricated by Hot Extrusion [Volume 6, Issue 2, 2019, Pages 239-247]
  • Acrylonitrile Butadiene Styrene Experimental Study on Dynamic Behavior of Acrylonitrile-Butadiene-Styrene (ABS) Based Nano Composite Reinforced by Nano Silica Addition [Volume 7, Issue 2, 2020, Pages 313-320]
  • Activation energy The Effect of the Solvents on Electrical Properties of POT Conducting Polymer [Volume 8, Issue 2, 2021, Pages 283-289]
  • Active vibration control Active control of free and forced vibration of rotating laminated composite cylindrical shells embedded with magnetostrictive layers based on classical shell theory [Volume 7, Issue 2, 2020, Pages 355-369]
  • Active vibration control Active Vibration Control of Laminated Composite Beam Operating in Thermal Environment using PZT-5H Patches [Volume 9, Issue 2, 2022, Pages 387-398]
  • Adaptive PSO Algorithm Vibration Optimization of Fiber-Metal Laminated Composite Shallow Shell Panels Using an Adaptive PSO Algorithm [Volume 4, Issue 2, 2017, Pages 99-110]
  • Additive Improving the Performance of Porous Concrete Composites Using Zeolite as a Coarse Grain [Volume 5, Issue 2, 2018, Pages 157-163]
  • Additive Manufacturing Tensile and Flexural Properties of 3D-Printed Polylactic Acid/Continuous Carbon Fiber Composite [Volume 10, Issue 2, 2023, Pages 407-418]
  • Adherend Semi Analytical Transient Dynamic Analysis of Composite Adhesive Single-lap Joints [Volume 7, Issue 1, 2020, Pages 137-145]
  • Adhesion Study of Bond Strength between Polymer-Modified Mortars/Concrete and Their Mechanical Properties using “Friction-Transfer” and “Pull-off” Methods [Volume 8, Issue 1, 2021, Pages 171-184]
  • Adhesive joint Semi Analytical Transient Dynamic Analysis of Composite Adhesive Single-lap Joints [Volume 7, Issue 1, 2020, Pages 137-145]
  • Advanced composite An Analytical Approach to Thermoelastic Bending of Simply Supported Advanced Ribbed Composite Plates [Volume 5, Issue 2, 2018, Pages 173-185]
  • Aeroelastic instability Parametric Analysis of Position and Direction of Laminated Composite C-Spar on Aeroelastic Flutter in Aircraft Tail [Volume 11, Issue 2, 2024, Pages 351-362]
  • Age hardening Effect of Aging on Fracture Toughness of Al6061-Graphite Particulate Composites [Volume 6, Issue 2, 2019, Pages 139-146]
  • Agglomerated CNTs Nonlinear Magneto-Nonlocal Vibration Analysis of Coupled Piezoelectric Micro-Plates Reinforced with Agglomerated CNTs [Volume 7, Issue 1, 2020, Pages 109-119]
  • Agglomeration Flexural Behaviour of Nanocomposite Plate with CNT Distribution and Agglomeration Effect [Volume 10, Issue 1, 2023, Pages 123-136]
  • Agglomeration Response of Agglomerated SWCNT Reinforced Nanocomposite Plate under Hygro-Thermal Loading [Volume 11, Issue 1, 2024, Pages 11-40]
  • Aggregated carbon nanotubes Free Vibration and Buckling Analyses of Functionally Graded Nanocomposite Plates Reinforced by Carbon Nanotube [Volume 4, Issue 1, 2017, Pages 59-73]
  • Aircraft gas turbine Stress Analysis of FGM Rotating Disk Subjected to Mechanical and Thermal Loads In Aircraft Gas Turbine Engine [Volume 7, Issue 1, 2020, Pages 1-13]
  • Aircraft tail Parametric Analysis of Position and Direction of Laminated Composite C-Spar on Aeroelastic Flutter in Aircraft Tail [Volume 11, Issue 2, 2024, Pages 351-362]
  • Airfoil section Parametric Analysis of Position and Direction of Laminated Composite C-Spar on Aeroelastic Flutter in Aircraft Tail [Volume 11, Issue 2, 2024, Pages 351-362]
  • Al6061-9%graphite Effect of Aging on Fracture Toughness of Al6061-Graphite Particulate Composites [Volume 6, Issue 2, 2019, Pages 139-146]
  • Al7075 Alloy Mechanical Characterization and Wear Behavior of Nano TiO2 Particulates Reinforced Al7075 Alloy Composites [Volume 7, Issue 1, 2020, Pages 71-78]
  • Al/B4C nanocomposite Effect of Particle Size on the Structural and Mechanical Properties of Al–AlN Nanocomposites Fabricated by Mechanical Alloying [Volume 2, Issue 2, 2015, Pages 73-78]
  • Al/B4C nano-composite The Structural and Mechanical Properties of Al-2.5%wt. B4C Met-al Matrix Nano-composite Fabricated by the Mechanical Alloying [Volume 2, Issue 1, 2015, Pages 39-44]
  • Al matrix nanocomposite A Case Study for Fabrication of MWCNT-TiO2 Hybrid Reinforced Aluminium Matrix Nanocomposites [Volume 1, Issue 2, 2014, Pages 107-111]
  • Al–MWCNT-TiO2 A Case Study for Fabrication of MWCNT-TiO2 Hybrid Reinforced Aluminium Matrix Nanocomposites [Volume 1, Issue 2, 2014, Pages 107-111]
  • Al/Sic Composite Coating Deposition of an Al/SiC Composite Coating on Steel by Friction Surfacing: Corrosion and Wear Properties [Volume 9, Issue 2, 2022, Pages 287-296]
  • Al/TiC composites Microwave-Assisted Two-Step Sintering of Al/8wt%TiC Composite Prepared by Powder Metallurgy [Volume 8, Issue 2, 2021, Pages 291-298]
  • Alumina Sintered Steel Composites Reinforced with Ceramic Nanoparticles: Fabrication, Characteristics and Wear Behavior [Volume 6, Issue 2, 2019, Pages 191-200]
  • Alumina Synthesis and Characterization Al2O3/Novolac/Fiberglass Nanocomposite: Modification of Thermal Stability and Thermal Insulation Properties [Volume 10, Issue 1, 2023, Pages 21-28]
  • Aluminium Matix Composites Studies on Progress of Aluminium Based Composites for Automotive Applications and its Damping Characteristics – A Review [(Articles in Press)]
  • Aluminium metal matrix composites (AMMC) A Review of Research Outcomes on Fabrication Methods and Investigations for Evaluating Fracture Behavior of Aluminum Metal Matrix Composites with its Applications [Volume 8, Issue 2, 2021, Pages 347-358]
  • Aluminum composites Optimization of AA6351-SiC-B4C Hybrid Composites in Wire EDM Using Grey Relation Technique [Volume 11, Issue 2, 2024, Pages 385-400]
  • Aluminum foam core Low-Velocity Impact Behavior of Foam Core Sandwich Panels with Different Face Sheet Layers: Numerical and Experimental Study [Volume 10, Issue 1, 2023, Pages 111-122]
  • Aluminum matrix composite On the Study of Mechanical Properties of Aluminum/Nano-Alumina Composites Produced via Powder Injection Molding [Volume 3, Issue 1, 2016, Pages 45-51]
  • Aluminum Nanocomposites Metallurgical Assessment of Graphite Reinforced Al-Cu-Mg Nanocomposites Produced by the Shaker Mill Method [Volume 10, Issue 1, 2023, Pages 103-110]
  • Amorphous Characterization of Thevetia Peruviana (Yellow Oleander) Shell Ash Powder as a Possible Filler in Polymer Composites [Volume 8, Issue 1, 2021, Pages 109-117]
  • Analytical method A Numerical and Analytical Solution for the Free Vibration of Laminated Composites Using Different Plate Theories [Volume 4, Issue 1, 2017, Pages 75-87]
  • Analytical method Analytical Approach for Thermo-electro-mechanical Vibration of Piezoelectric Nanoplates Resting on Elastic Foundations based on Nonlocal Theory [Volume 6, Issue 2, 2019, Pages 117-129]
  • Analytical method Thermo–Elastic Stresses and Deformation Analysis of FG Rotating Hollow Spherical Body [Volume 9, Issue 1, 2022, Pages 125-136]
  • Analytical model Analytical Modeling of Functionally Graded Carbon Nanotube-Reinforced Composite Plates under Low-Velocity Impact [Volume 11, Issue 2, 2024, Pages 281-294]
  • Analytical modeling Analysis of SH-waves Propagating in Multiferroic Structure with Interfacial Imperfection [Volume 9, Issue 1, 2022, Pages 1-10]
  • Analytical modelling Free Natural Frequency Analysis of an FG Composite Rectangular Plate Coupled with Fluid using Rayleigh–Ritz Method [Volume 1, Issue 2, 2014, Pages 131-143]
  • Analytical Solution On the Buckling the Behavior of a Multiphase Smart Plate based on a Higher-order Theory [Volume 4, Issue 1, 2017, Pages 47-58]
  • Analytical Solution Optimization of infinite composite plates with quasi-triangular holes under in-plane loading [Volume 5, Issue 2, 2018, Pages 115-130]
  • Analytical Solution On Moving Harmonic Load and Dynamic Response of Carbon Nanotube-Reinforced Composite Beams using Higher-Order Shear Deformation Theories [Volume 10, Issue 2, 2023, Pages 257-270]
  • Annular plate Free Vibration Analysis of 2D Functionally Graded Annular Plate considering the Effect of Material Composition via 2D Differential Quadrature Method [Volume 2, Issue 2, 2015, Pages 95-111]
  • Annular plates A Semi-analytical Solution for 3-D Dynamic Analysis of Thick Continuously Graded Carbon Nanotube-reinforced Annular Plates Resting on a Two-parameter Elastic Foundation [Volume 1, Issue 2, 2014, Pages 113-130]
  • ANOVA Optimization of Wear Behaviour on Mg-TiO2 Nanocomposite Using Taguchi Grey Relational Analysis [Volume 10, Issue 1, 2023, Pages 151-156]
  • Applied voltage Vibration in an Electrically Affected Hygro-magneto-thermo-flexo Electric Nanobeam Embedded in Winkler-Pasternak Foundation [Volume 8, Issue 2, 2021, Pages 401-414]
  • Artificial Neural Network The Graft of ANN-FEM Technique in Macro-mechanics of Multi-oriented Natural Fiber/Polyester Laminates [Volume 8, Issue 1, 2021, Pages 51-68]
  • Artificial spring Free Vibration Analysis of Composite Plates with Artificial Springs by Trigonometric Ritz Method [Volume 1, Issue 1, 2014, Pages 61-70]
  • Aspect Ratio Initial Buckling Behavior of Elastically Supported Rectangular FGM Plate based on Higher Order Shear Deformation Theory via Spline RBF Method [Volume 11, Issue 1, 2024, Pages 59-72]
  • Aspect Ratio Free Vibration Analysis of Simply Supported and Clamped Functionally Graded Rectangular Plate Using Coupled Displacement Field Method [(Articles in Press)]
  • Attached Mass Investigation of Free Vibration of Laminated Composite Conical Shell with Local Attached Mass [Volume 9, Issue 1, 2022, Pages 173-184]
  • Attached mass-spring system Moving load The Effects of the Moving Load and the Attached Mass-Spring-Damper System Interactions on the Dynamic Responses of the Composite Plates: An Analytical Approach [Volume 2, Issue 1, 2015, Pages 17-30]
  • Automotive Studies on Progress of Aluminium Based Composites for Automotive Applications and its Damping Characteristics – A Review [(Articles in Press)]
  • Auxetic structure Crashworthiness Study of an Innovative Helmet Liner Composed of an Auxetic Lattice Structure and PU Foam [Volume 9, Issue 1, 2022, Pages 25-35]
  • Auxetic structure Investigation of Free Vibration in Fluid-Loaded Cylindrical Shells with a Three-Layer Sandwich Wall and an Auxetic Central Layer [(Articles in Press)]
  • Axial compression Experimental Study on Double-Walled Copper and Carbon/Epoxy Composite Tubes under the Axial Loading [Volume 1, Issue 2, 2014, Pages 71-79]
  • Axial Compressor Stress Analysis of the Rotating Carbon-Carbon Composite Disk of an Axial Compressor [Volume 10, Issue 2, 2023, Pages 271-282]
  • Axial stress Higher Order Approximations for Bending of FG Beams Using B-Spline Collocation Technique [Volume 11, Issue 1, 2024, Pages 159-176]
  • Axisymmetric body Thermo–Elastic Stresses and Deformation Analysis of FG Rotating Hollow Spherical Body [Volume 9, Issue 1, 2022, Pages 125-136]

B

  • Bagasse The Role of Natural Additives on the Wear and Friction Proper-ties of Nanocomposites for Friction Applications [Volume 6, Issue 2, 2019, Pages 159-165]
  • Ballistic impact Investigation into The Behavior of Nano-composite Tubes at Ballistic Impact [Volume 4, Issue 3, 2017, Pages 207-210]
  • Bamboo Thermo-Mechanical Characterization of Jute-Bamboo Hybrid Thermoplastic Polymer Matrix Composites with Different Stacking Sequences for Automobile Applications [Volume 10, Issue 2, 2023, Pages 375-382]
  • Bamboo Experimental and Numerical Analysis of Woven Bamboo and Jute Fiber Reinforced in Epoxy Composites [Volume 11, Issue 1, 2024, Pages 103-118]
  • Basalt Compression Analysis of Hollow Cylinder Basalt Continuous Filament Epoxy Composite Filled with Shape Memory Wire [Volume 4, Issue 3, 2017, Pages 225-232]
  • Basalt fiber Accelerated Heat Aging Study of Phenolic/Basalt Fiber Reinforced Composites [Volume 3, Issue 1, 2016, Pages 1-7]
  • Basalt fibre Finite Element Analysis of Mechanical Properties of Basalt-Carbon Epoxy Hybrid Laminates [Volume 9, Issue 2, 2022, Pages 263-274]
  • Base excitation On the Nonlinear Dynamics of an Energy Harvesting Device Based on Magnetostriction [Volume 8, Issue 1, 2021, Pages 33-40]
  • Basic functions Modal Characteristics of Composite Beams with Single Delamination- A Simple Analytical Technique [Volume 1, Issue 2, 2014, Pages 97-106]
  • Beam modal function model Discrepancies Between Free Vibration of FML and Composite Cylindrical Shells Reinforced by CNTs [Volume 6, Issue 2, 2019, Pages 105-115]
  • Bending Strength Experimental Study on Dynamic Behavior of Acrylonitrile-Butadiene-Styrene (ABS) Based Nano Composite Reinforced by Nano Silica Addition [Volume 7, Issue 2, 2020, Pages 313-320]
  • Bending Strength Microwave-Assisted Two-Step Sintering of Al/8wt%TiC Composite Prepared by Powder Metallurgy [Volume 8, Issue 2, 2021, Pages 291-298]
  • Bessel function Assessment of Hydrostatic Stress and Thermo Piezoelectricity in a Laminated Multilayered Rotating Hollow Cylinder [Volume 8, Issue 1, 2021, Pages 77-86]
  • Biaxial buckling and bending Biaxial Buckling and Bending of Smart Nanocomposite Plate Reinforced by CNTs using Extended Mixture Rule Approach [Volume 1, Issue 1, 2014, Pages 17-26]
  • Biocompatible polymer Synthesis and Characterization of Polymer/Nanosilicagel Nano-composites [Volume 4, Issue 1, 2017, Pages 1-8]
  • Bio-composite Analyzing and Improving Flexural and Impact Strength of Composites Enhanced with Nanoparticles and Natural Fibers [Volume 11, Issue 2, 2024, Pages 467-482]
  • Biodegradability Influence of Filler Content on the Mechanical, Thermal, Moisture Absorption, and Biodegradability Properties of Bionanocomposite with Cellulosic Fibers Derived from Delonix Regia Fruits [Volume 11, Issue 1, 2024, Pages 73-86]
  • Biodegradable film Physical and Mechanical Properties of Biodegradable Film from Taro Starch (Xanthosoma Sagittifolium) and Duck Bone Gelatin [Volume 9, Issue 2, 2022, Pages 213-220]
  • Bionanocomposite Influence of Filler Content on the Mechanical, Thermal, Moisture Absorption, and Biodegradability Properties of Bionanocomposite with Cellulosic Fibers Derived from Delonix Regia Fruits [Volume 11, Issue 1, 2024, Pages 73-86]
  • Boundary Layer Mechanical Properties of Graphene/Epoxy Nanocomposites under Static and Flexural Fatigue Loadings [Volume 1, Issue 1, 2014, Pages 1-7]
  • Boundary Layer An Analytical Study on Effects of adding Nanoparticles to Water and Enhancement in Thermal Properties Based on Falkner-Skan Model [Volume 1, Issue 1, 2014, Pages 27-35]
  • Boundary Layer Elasticity Solution of Functionally Graded Carbon Nanotube Reinforced Composite Cylindrical Panel [Volume 1, Issue 1, 2014, Pages 49-60]
  • Bracing Investigation of Nonlinear Behavior of Composite Bracing Structures with Concrete Columns and Steel Beams (RCS) Applying Finite Element Method [Volume 7, Issue 1, 2020, Pages 25-37]
  • B-spline Collocation Higher Order Approximations for Bending of FG Beams Using B-Spline Collocation Technique [Volume 11, Issue 1, 2024, Pages 159-176]
  • Buckling Buckling Analysis of Spherical Composite Panels Reinforced by Carbon Nanotube [Volume 2, Issue 2, 2015, Pages 135-144]
  • Buckling Investigation of Buckling Analysis of Epoxy/ Nanoclay/ Carbon Fiber Hybrid Laminated Nanocomposite: Using VARTM Technique for Preparation [Volume 3, Issue 1, 2016, Pages 63-71]
  • Buckling The Effect of External Skin on Buckling Strength of Composite Lattice Cylinders Based on Numerical and Experimental Analysis [Volume 3, Issue 2, 2016, Pages 83-87]
  • Buckling Free Vibration and Buckling Analyses of Functionally Graded Nanocomposite Plates Reinforced by Carbon Nanotube [Volume 4, Issue 1, 2017, Pages 59-73]
  • Buckling Bending, buckling and free vibration responses of hyperbolic shear deformable FGM beams [Volume 5, Issue 1, 2018, Pages 13-24]
  • Buckling Buckling Analysis of Functionally Graded Cylindrical Shells Under Mechanical and Thermal Loads by Dynamic Relaxation Method [Volume 7, Issue 2, 2020, Pages 297-311]
  • Buckling Buckling Analysis of Nano Composite Plates Based on Combination of the Incremental Load Technique and Dynamic Relaxation Method [Volume 8, Issue 1, 2021, Pages 133-148]
  • Buckling Buckling Analysis of Composite Grid-Stiffened Cylindrical Shells Using a Generalized Equivalent Single Layer Theory [Volume 8, Issue 2, 2021, Pages 455-466]
  • Buckling Buckling and Nonlinear Vibration of Functionally Graded Porous Micro-beam Resting on Elastic Foundation [Volume 9, Issue 1, 2022, Pages 75-88]
  • Buckling Experimental Study of Buckling of Reinforced Conical Composite Shell Under Hydrostatic Loading [Volume 9, Issue 2, 2022, Pages 359-366]
  • Buckling Buckling Analysis of Sandwich Timoshenko Nanobeams with AFG Core and Two Metal Face-Sheets [Volume 10, Issue 2, 2023, Pages 319-332]
  • Buckling Vibration and Buckling Analysis of Skew Sandwich Plate using Radial Basis Collocation Method [Volume 10, Issue 2, 2023, Pages 383-392]
  • Buckling On Numerical Investigation of Buckling in Two-Directional Porous Functionally Graded Beam Using Higher Order Shear Deformation Theory [Volume 10, Issue 2, 2023, Pages 393-406]
  • Buckling Free Vibration and Buckling Analyses of Nanobeam Embedded in Pasternak Foundation [Volume 10, Issue 2, 2023, Pages 419-436]
  • Buckling Initial Buckling Behavior of Elastically Supported Rectangular FGM Plate based on Higher Order Shear Deformation Theory via Spline RBF Method [Volume 11, Issue 1, 2024, Pages 59-72]
  • Buckling Static Buckling and Free Vibration Analysis of Bi-Dimensional FG Metal Ceramic Porous Beam [Volume 11, Issue 1, 2024, Pages 149-158]
  • Buckling Analysis Buckling analysis of FML cylindrical shells under combined axial and torsional loading [Volume 7, Issue 2, 2020, Pages 263-270]
  • Buckling Analysis Buckling Analysis of Sandwich Structures with Metamaterials Core Integrated by Graphene Nanoplatelets Reinforced Polymer Composite [Volume 10, Issue 1, 2023, Pages 1-10]
  • Buckling Analysis Buckling Analysis of Functionally Graded Sandwich Beam Based on Third-Order Zigzag Theory [Volume 10, Issue 1, 2023, Pages 55-68]
  • Buckling Analysis Modeling the Buckling Characteristics of Pineapple Leaf Fibre Reinforced Laminated Epoxy Composites [Volume 10, Issue 2, 2023, Pages 233-246]
  • Buckling load On the Buckling the Behavior of a Multiphase Smart Plate based on a Higher-order Theory [Volume 4, Issue 1, 2017, Pages 47-58]
  • Buckling load Finite Element Modeling for Buckling Analysis of Tapered Axially Functionally Graded Timoshenko Beam on Elastic Foundation [Volume 7, Issue 2, 2020, Pages 203-218]
  • Buckling load The Effect of Different Weighting Ratios, Length, and Thickness on Weighted Sum of the First Natural Frequency and Critical Buckling Load for a Laminated Composite Circular Cylindrical Shell [Volume 8, Issue 1, 2021, Pages 87-98]
  • Buckling load Minimal Mass and Maximal Buckling Load of Composite Hexagonal-Triangle Grid Structure using FSDT under External Hydrostatic Pressure [Volume 10, Issue 2, 2023, Pages 309-318]
  • Buckling load Dynamic and Buckling Analysis of Hybrid Composite Beam Strengthened with Carbon Fibers/Aramid Fibers under Temperature Gradient [Volume 11, Issue 1, 2024, Pages 203-216]
  • Buckling load A Comprehensive Comparison between Multi-Objective Optimization Methods for Composite Hexagonal-Triangle Grid Structure using FSDT under External Hydrostatic Pressure [Volume 11, Issue 1, 2024, Pages 177-190]
  • BVP Quick Review and Assessment of Thermal Stress Analyses for Exact and Assumed Temperature Distribution for Composite and Sandwich Laminates [Volume 10, Issue 2, 2023, Pages 343-362]

C

  • Cable Nonlinear Vibration Analysis of the Composite Cable using Perturbation Method and the Green-Lagrangian Nonlinear Strain [Volume 6, Issue 1, 2019, Pages 27-34]
  • California bearing ratio Engineering Behavior of Municipal Solid Waste Incinerated Ash with Compressible Soil: An Approach Towards the Waste Utilization & Stabilization of Compressible Soil [(Articles in Press)]
  • Capillary pressure Capillary Effects on Surface Enhancement in a Non-Homogeneous Fibrous Porous Medium [Volume 5, Issue 1, 2018, Pages 83-90]
  • Carbon-Carbon Composite Stress Analysis of the Rotating Carbon-Carbon Composite Disk of an Axial Compressor [Volume 10, Issue 2, 2023, Pages 271-282]
  • Carbon/epoxy composite tubes Experimental Study on Double-Walled Copper and Carbon/Epoxy Composite Tubes under the Axial Loading [Volume 1, Issue 2, 2014, Pages 71-79]
  • Carbon fiber Investigation of Buckling Analysis of Epoxy/ Nanoclay/ Carbon Fiber Hybrid Laminated Nanocomposite: Using VARTM Technique for Preparation [Volume 3, Issue 1, 2016, Pages 63-71]
  • Carbon fiber Tensile and Flexural Properties of 3D-Printed Polylactic Acid/Continuous Carbon Fiber Composite [Volume 10, Issue 2, 2023, Pages 407-418]
  • Carbon fiber Dynamic and Buckling Analysis of Hybrid Composite Beam Strengthened with Carbon Fibers/Aramid Fibers under Temperature Gradient [Volume 11, Issue 1, 2024, Pages 203-216]
  • Carbon fibre Improving Mechanical Properties of Nanocomposite-based Epoxy by High-impact Polystyrene and Multiwalled Carbon Nanotubes: Optimizing by a Mixture Design Approach [Volume 4, Issue 1, 2017, Pages 33-45]
  • Carbon fibre Finite Element Analysis of Mechanical Properties of Basalt-Carbon Epoxy Hybrid Laminates [Volume 9, Issue 2, 2022, Pages 263-274]
  • Carbon nanotube Predicting Young’s Modulus of Aggregated Carbon Nanotube Reinforced Polymer [Volume 1, Issue 1, 2014, Pages 9-16]
  • Carbon nanotube Elasticity Solution of Functionally Graded Carbon Nanotube Reinforced Composite Cylindrical Panel [Volume 1, Issue 1, 2014, Pages 49-60]
  • Carbon nanotube Distribution of Residual Stresses in Polymer Reinforced Carbon Nanotubes and Laminated Carbon Fibers [Volume 4, Issue 1, 2017, Pages 9-18]
  • Carbon nanotube Analytical Modeling of Functionally Graded Carbon Nanotube-Reinforced Composite Plates under Low-Velocity Impact [Volume 11, Issue 2, 2024, Pages 281-294]
  • Carbon nanotube-reinforced Buckling Analysis of Spherical Composite Panels Reinforced by Carbon Nanotube [Volume 2, Issue 2, 2015, Pages 135-144]
  • Carbon nanotube-reinforced Composite Frequency Analysis of Functionally Graded Carbon Nanotube-reinforced Cylindrical Panels by Mesh-free Galerkin Method [Volume 8, Issue 2, 2021, Pages 415-424]
  • Carbon nanotubes Mechanical Properties of CNT-Reinforced Polymer Nano-composites: A Molecular Dynamics Study [Volume 3, Issue 2, 2016, Pages 113-121]
  • Carbon nanotubes Experimental Study on Amine-Functionalized Carbon Nanotubes’ Effect on the Thermomechanical Properties of CNT/Epoxy Nano-composites [Volume 5, Issue 1, 2018, Pages 41-48]
  • Carbon nanotubes Isogeometric Free and Forced Vibration Analyses of FG-CNTs Plates based on a Logarithmic Higher-Order Shear Deformation Theory [Volume 8, Issue 2, 2021, Pages 435-453]
  • Carbon nanotubes Free Vibration Response of Agglomerated Carbon Nanotube-Reinforced Nanocomposite Plates [Volume 10, Issue 1, 2023, Pages 167-194]
  • Carbon nano-tubes Free Vibration of Lattice Cylindrical Composite Shell Reinforced with Carbon Nano-tubes [Volume 2, Issue 1, 2015, Pages 61-72]
  • Casting Evaluation of hardness and wear resistance of nano-sized titanium-carbide-reinforced commercially cast aluminum alloy matrices [Volume 5, Issue 1, 2018, Pages 75-81]
  • Cenosphere Statistical Approach of Determining the Effect of Cenosphere on the Tribological Behaviour of Jute Reinforced Polymer Based Composite [Volume 10, Issue 1, 2023, Pages 211-220]
  • Ceramic-Metal Composite Finite Difference Analysis of 2D Stress Wave Propagation in Two Dimensional Functionally Graded Ceramics-Metals Composites [Volume 8, Issue 2, 2021, Pages 321-334]
  • CFRP Failure Pressure Prediction of Semi Spherical GFRP Shells in Thermal Environment [Volume 7, Issue 1, 2020, Pages 103-108]
  • CFRP Effects of Horizontal Deficiency Location on the Structural Behaviors of Steel SHS Short Columns Strengthened using CFRP [Volume 7, Issue 1, 2020, Pages 39-47]
  • CFRP Ultrasonic Assisted Drilling of Carbon Fiber Reinforced Plastic Composites with Non-Rotating Vibratory Tool [Volume 9, Issue 1, 2022, Pages 147-154]
  • CFRP Failure Probability Analysis of Composite Pressure Tanks Using Subset Simulation [Volume 11, Issue 2, 2024, Pages 363-374]
  • CFRP strengthening Strengthening of Deficient Steel Sections using CFRP Composite under Combined Loading [Volume 7, Issue 2, 2020, Pages 287-296]
  • CFT Column Damage Detection in Concrete Filled Tube Columns Based on Experimental Modal Data and Wavelet Technique [Volume 7, Issue 2, 2020, Pages 245-254]
  • Charpy test Mechanical and Physical Properties of Glass-Fiber Reinforced Polymer Rods Manufactured by Different Pultrusion Methods [Volume 8, Issue 1, 2021, Pages 99-107]
  • Chill casting Effect of Chilling & B4C content on Machining Efficiency and Surface Quality in Wire-Cut Machining of Aluminum Matrix Chilled Composites [Volume 11, Issue 2, 2024, Pages 341-350]
  • Circular/Annular plates Numerical Investigation on Free Vibration Response of Bi-Directional Porous Functionally Graded Circular/Annular Plates [Volume 9, Issue 2, 2022, Pages 243-262]
  • Circular copper tubes Experimental Study on Double-Walled Copper and Carbon/Epoxy Composite Tubes under the Axial Loading [Volume 1, Issue 2, 2014, Pages 71-79]
  • Circular Cylindrical Shell The Effect of Different Weighting Ratios, Length, and Thickness on Weighted Sum of the First Natural Frequency and Critical Buckling Load for a Laminated Composite Circular Cylindrical Shell [Volume 8, Issue 1, 2021, Pages 87-98]
  • Circular cylindrical shells A New Three-Dimensional Refined Higher-Order Theory for Free Vibration Analysis of Composite Circular Cylindrical Shells [Volume 6, Issue 2, 2019, Pages 201-223]
  • Circular plates Analytical Solution for Sound Radiation of Vibrating Circular Plates coupled with Piezo-electric Layers [Volume 3, Issue 2, 2016, Pages 89-98]
  • Classical lamination theory A Novel Approach for Lateral Buckling Assessment of Double Tapered Thin-Walled Laminated Composite I-Beams [Volume 9, Issue 1, 2022, Pages 11-23]
  • Classical plate theory Biaxial Buckling and Bending of Smart Nanocomposite Plate Reinforced by CNTs using Extended Mixture Rule Approach [Volume 1, Issue 1, 2014, Pages 17-26]
  • Classical plate theory Analytical Solution for Sound Radiation of Vibrating Circular Plates coupled with Piezo-electric Layers [Volume 3, Issue 2, 2016, Pages 89-98]
  • Classical shell theory Active control of free and forced vibration of rotating laminated composite cylindrical shells embedded with magnetostrictive layers based on classical shell theory [Volume 7, Issue 2, 2020, Pages 355-369]
  • CNT In Situ Formation of SiC/CNT Ceramic Nanocomposite by Phenolic Pyrolysis [Volume 1, Issue 2, 2014, Pages 87-96]
  • CNT Response of Agglomerated SWCNT Reinforced Nanocomposite Plate under Hygro-Thermal Loading [Volume 11, Issue 1, 2024, Pages 11-40]
  • CNTRC beams On Moving Harmonic Load and Dynamic Response of Carbon Nanotube-Reinforced Composite Beams using Higher-Order Shear Deformation Theories [Volume 10, Issue 2, 2023, Pages 257-270]
  • CNTRC plate Buckling Analysis of Nano Composite Plates Based on Combination of the Incremental Load Technique and Dynamic Relaxation Method [Volume 8, Issue 1, 2021, Pages 133-148]
  • CNTs Discrepancies Between Free Vibration of FML and Composite Cylindrical Shells Reinforced by CNTs [Volume 6, Issue 2, 2019, Pages 105-115]
  • Coatings Effect of the Nature of Oxide Nanofillers on Changes in the Mechanical Properties of Epoxy Coatings under Thermal Cycling [Volume 10, Issue 1, 2023, Pages 195-204]
  • Cohesive zone model Delamination Analysis in Composite Root of a Carbon-Layer Reinforced Wind Turbine Blade [Volume 6, Issue 1, 2019, Pages 9-18]
  • Cold weather apparel Evaluation of Heat Resistance Characteristics of Fibrous Material for Cold Weather Application [Volume 11, Issue 1, 2024, Pages 231-238]
  • Colliding bodies optimization A Novel Hybrid Genetic Modified Colliding Bodies Optimization for Designing of Composite Laminates [Volume 8, Issue 1, 2021, Pages 203-212]
  • Combined loads Strengthening of Deficient Steel Sections using CFRP Composite under Combined Loading [Volume 7, Issue 2, 2020, Pages 287-296]
  • Comparison of Deflection Comparison of Deflection in Two-Directional Functionally Graded Tapered Beam [Volume 11, Issue 1, 2024, Pages 191-202]
  • Complex variable method Optimization of infinite composite plates with quasi-triangular holes under in-plane loading [Volume 5, Issue 2, 2018, Pages 115-130]
  • Composite Modeling of Hygrothermal Damage of Composite Materials [Volume 3, Issue 2, 2016, Pages 137-144]
  • Composite A New Three-Dimensional Refined Higher-Order Theory for Free Vibration Analysis of Composite Circular Cylindrical Shells [Volume 6, Issue 2, 2019, Pages 201-223]
  • Composite Nonlinear Vibration Analysis of the Composite Cable using Perturbation Method and the Green-Lagrangian Nonlinear Strain [Volume 6, Issue 1, 2019, Pages 27-34]
  • Composite Crushing Analysis of Empty and Foam-Filled Cylindrical and Conical Corrugated Composite Tubes [Volume 6, Issue 1, 2019, Pages 35-44]
  • Composite Experimental and Numerical Investigation of Reinforcement Sheet Effect on the Bending Strength of Corrugated Composite Panels [Volume 8, Issue 1, 2021, Pages 1-13]
  • Composite Buckling Analysis of Composite Grid-Stiffened Cylindrical Shells Using a Generalized Equivalent Single Layer Theory [Volume 8, Issue 2, 2021, Pages 455-466]
  • Composite Simulation and Optimization of Fatigue Life of Carbon-Epoxy Composite Sub Frame [Volume 9, Issue 1, 2022, Pages 37-47]
  • Composite Low-Velocity Impact Behavior of Foam Core Sandwich Panels with Different Face Sheet Layers: Numerical and Experimental Study [Volume 10, Issue 1, 2023, Pages 111-122]
  • Composite Thrust Force and Delamination Analysis on Redmud-Filled Coconut Sheath Fiber Polyester Composite [(Articles in Press)]
  • Composite beams Modal Characteristics of Composite Beams with Single Delamination- A Simple Analytical Technique [Volume 1, Issue 2, 2014, Pages 97-106]
  • Composite conical Shell Investigation of Free Vibration of Laminated Composite Conical Shell with Local Attached Mass [Volume 9, Issue 1, 2022, Pages 173-184]
  • Composite conical shells Experimental Study of Buckling of Reinforced Conical Composite Shell Under Hydrostatic Loading [Volume 9, Issue 2, 2022, Pages 359-366]
  • Composite cylindrical shell Investigation into The Behavior of Nano-composite Tubes at Ballistic Impact [Volume 4, Issue 3, 2017, Pages 207-210]
  • Composite foam An Investigation on Three-Point Bending of Foam-Filled Double Tubes and Parameter Optimization Using Response Surface Methodology [Volume 8, Issue 1, 2021, Pages 41-50]
  • Composite frame of RCS Investigation of Nonlinear Behavior of Composite Bracing Structures with Concrete Columns and Steel Beams (RCS) Applying Finite Element Method [Volume 7, Issue 1, 2020, Pages 25-37]
  • Composite laminate Optimization of Hybrid Composite Laminate Based on the Frequency using Imperialist Competitive Algorithm [Volume 1, Issue 1, 2014, Pages 37-48]
  • Composite materials A Novel Hybrid Genetic Modified Colliding Bodies Optimization for Designing of Composite Laminates [Volume 8, Issue 1, 2021, Pages 203-212]
  • Composite materials Static Buckling and Free Vibration Analysis of Bi-Dimensional FG Metal Ceramic Porous Beam [Volume 11, Issue 1, 2024, Pages 149-158]
  • Composite patch Experimental and Numerical Study on the Strength of Repaired Steel Pipes with Composite Patches under Internal Pressure [Volume 10, Issue 2, 2023, Pages 437-448]
  • Composite plate The Effects of the Moving Load and the Attached Mass-Spring-Damper System Interactions on the Dynamic Responses of the Composite Plates: An Analytical Approach [Volume 2, Issue 1, 2015, Pages 17-30]
  • Composite plates Free Vibration Analysis of Composite Plates with Artificial Springs by Trigonometric Ritz Method [Volume 1, Issue 1, 2014, Pages 61-70]
  • Composite polymer Mechanical, Crystallographic, and Microstructural Analysis of Polymer Composites Developed from Iron Filings and Polystyrene Wastes [Volume 9, Issue 1, 2022, Pages 137-145]
  • Composite reinforcement Experimental and Numerical Investigation on the Flexural Behavior of Composite-Reinforced Top-Hat Shape Beam [Volume 8, Issue 1, 2021, Pages 149-156]
  • Composites An Experimental and Numerical Approach of Polymer Composites Based on Jute-Bamboo Natural Fiber [Volume 9, Issue 1, 2022, Pages 105-113]
  • Composites Numerical Analysis of Thermal Buckling of Honeycomb Core Sandwich Panel under Thermal Loading [Volume 10, Issue 2, 2023, Pages 333-342]
  • Composites Quick Review and Assessment of Thermal Stress Analyses for Exact and Assumed Temperature Distribution for Composite and Sandwich Laminates [Volume 10, Issue 2, 2023, Pages 343-362]
  • Composites Multi-response Optimization while Drilling of Composite Laminate with Core Drill by Grey Entropy Fuzzy (GEF) Method [Volume 11, Issue 2, 2024, Pages 483-502]
  • Composite Shell Minimal Mass and Maximal Buckling Load of Composite Hexagonal-Triangle Grid Structure using FSDT under External Hydrostatic Pressure [Volume 10, Issue 2, 2023, Pages 309-318]
  • Composite Shell A Comprehensive Comparison between Multi-Objective Optimization Methods for Composite Hexagonal-Triangle Grid Structure using FSDT under External Hydrostatic Pressure [Volume 11, Issue 1, 2024, Pages 177-190]
  • Composite structure Health Monitoring for Composite under Low-Cycle Cyclic Loading, Considering Effects of Acoustic Emission Sensor Type [Volume 6, Issue 1, 2019, Pages 19-26]
  • Composite tubes Crashworthy Behavior of Plain Weave Glass/Epoxy Composite Tubes Containing Different Extents of Overlap of Dropped Plies [Volume 11, Issue 1, 2024, Pages 87-102]
  • Composite Vessel Design and Experimental/Numerical Analysis of Metal-Composite Vessel with Spherical Cap under Internal Pressure [Volume 10, Issue 2, 2023, Pages 247-256]
  • Composite Vessels Failure Probability Analysis of Composite Pressure Tanks Using Subset Simulation [Volume 11, Issue 2, 2024, Pages 363-374]
  • Compression Compression Analysis of Hollow Cylinder Basalt Continuous Filament Epoxy Composite Filled with Shape Memory Wire [Volume 4, Issue 3, 2017, Pages 225-232]
  • Compression Study on Compression and Flexural Behavior of ABS-SiO2 Poly-mer Matrix Composite Fabricated by Hot Extrusion [Volume 6, Issue 2, 2019, Pages 239-247]
  • Compressive Properties Effects of Nanotube/Matrix Interface on Multi-Walled Carbon Nanotube Reinforced Polymer Mechanical Properties [Volume 4, Issue 3, 2017, Pages 211-223]
  • Compressive Strength A Comparative Study on the Microstructure and Mechanical Properties of Al-Si-Cu/1wt %NCP Composites after T6 Heat Treatment [Volume 7, Issue 1, 2020, Pages 129-136]
  • Compressor Spool Thermoelastic Analysis of Compressor Spool in Turbojet Engine and Redesign it Using Functionally Graded Materials with Opti-mal Coefficients [Volume 6, Issue 2, 2019, Pages 167-179]
  • Computational analysis Static Buckling and Free Vibration Analysis of Bi-Dimensional FG Metal Ceramic Porous Beam [Volume 11, Issue 1, 2024, Pages 149-158]
  • Concrete Experimental investigation of the strength of glass fiber-reinforced concrete exposed to high temperature [Volume 5, Issue 2, 2018, Pages 103-113]
  • Concrete column Investigation of Nonlinear Behavior of Composite Bracing Structures with Concrete Columns and Steel Beams (RCS) Applying Finite Element Method [Volume 7, Issue 1, 2020, Pages 25-37]
  • Connector Constraint Effects of Nanotube/Matrix Interface on Multi-Walled Carbon Nanotube Reinforced Polymer Mechanical Properties [Volume 4, Issue 3, 2017, Pages 211-223]
  • Contact stress approach An Analytical Study on the Indentation of a Layered Composite Beam and its Utilization in Low Velocity Impact Response [Volume 9, Issue 1, 2022, Pages 155-162]
  • Containing liquid Investigation of Free Vibration in Fluid-Loaded Cylindrical Shells with a Three-Layer Sandwich Wall and an Auxetic Central Layer [(Articles in Press)]
  • Continuous Fiber Composites Tensile and Flexural Properties of 3D-Printed Polylactic Acid/Continuous Carbon Fiber Composite [Volume 10, Issue 2, 2023, Pages 407-418]
  • Continuously graded carbon nanotube-reinforced A Semi-analytical Solution for 3-D Dynamic Analysis of Thick Continuously Graded Carbon Nanotube-reinforced Annular Plates Resting on a Two-parameter Elastic Foundation [Volume 1, Issue 2, 2014, Pages 113-130]
  • Copper Effect of Chilling & B4C content on Machining Efficiency and Surface Quality in Wire-Cut Machining of Aluminum Matrix Chilled Composites [Volume 11, Issue 2, 2024, Pages 341-350]
  • Corrosion Properties Deposition of an Al/SiC Composite Coating on Steel by Friction Surfacing: Corrosion and Wear Properties [Volume 9, Issue 2, 2022, Pages 287-296]
  • Corrugate Experimental and Numerical Investigation of Reinforcement Sheet Effect on the Bending Strength of Corrugated Composite Panels [Volume 8, Issue 1, 2021, Pages 1-13]
  • Corrugated core Improving the Performance of the Sandwich Panel with the Corrugated Core Filled with Metal Foam: Mathematical and Numerical Methods [Volume 6, Issue 2, 2019, Pages 249-261]
  • Corrugated core Experimental Investigation on Quasi-Static Impact Response of Glass/Epoxy Composite Corrugated Core Sandwich Panels [Volume 10, Issue 2, 2023, Pages 283-294]
  • Coupled system Nonlinear Magneto-Nonlocal Vibration Analysis of Coupled Piezoelectric Micro-Plates Reinforced with Agglomerated CNTs [Volume 7, Issue 1, 2020, Pages 109-119]
  • Coupled Temperature and moisture Transient Solution of Heat and Moisture Transfer in a Functionally Graded Hollow Cylinder with Finite Length [Volume 9, Issue 1, 2022, Pages 49-57]
  • Couple stress theory Free Vibration Analysis of Size-Dependent, Functionally Graded, Rectangular Nano/Micro-plates based on Modified Nonlinear Couple Stress Shear Deformation Plate Theories [Volume 4, Issue 2, 2017, Pages 127-137]
  • Crack growth XFEM for Fracture Analysis of Centrally Cracked Laminated Plates Subjected to Biaxial Loads [Volume 8, Issue 1, 2021, Pages 213-234]
  • Crack Propagation XFEM for Fracture Analysis of Centrally Cracked Laminated Plates Subjected to Biaxial Loads [Volume 8, Issue 1, 2021, Pages 213-234]
  • Crashworthiness Numerical Crashworthiness Analysis of Graded Layered Foam- Filled Tubes Under Axial Loading [Volume 6, Issue 1, 2019, Pages 57-64]
  • Crystallinity Characterization of Thevetia Peruviana (Yellow Oleander) Shell Ash Powder as a Possible Filler in Polymer Composites [Volume 8, Issue 1, 2021, Pages 109-117]
  • CT specimens Effect of Aging on Fracture Toughness of Al6061-Graphite Particulate Composites [Volume 6, Issue 2, 2019, Pages 139-146]
  • Curing Cured Poly(ethylene-g-maleic anhydride)/Graphene Nanocomposite: Properties and Characterization [Volume 5, Issue 1, 2018, Pages 1-12]
  • Curved graphene Effect of Curvature on the Mechanical Properties of Graphene: A Density Functional Tight-binding Approach [Volume 3, Issue 1, 2016, Pages 9-13]
  • Curved sandwich beam Elasto-dynamic Response Analysis of a Curved Composite Sandwich Beam Subjected to the Loading of a Moving Mass [Volume 7, Issue 2, 2020, Pages 347-354]
  • Cutout Theoretical, numerical, and experimental analyses of free vibrations of glass fiber reinforced polymer plates with central cutouts and free boundaries [Volume 5, Issue 1, 2018, Pages 67-74]
  • Cutout Maximization of Fundamental Frequency of Composite Stiffened Hypar Shell with Cutout by Taguchi Method [Volume 10, Issue 1, 2023, Pages 43-54]
  • Cutting force Experimental Study on Surface Roughness and Cutting Force in Turning of Al7032 Reinforced with SiC Using Taguchi Design [Volume 8, Issue 1, 2021, Pages 69-76]
  • Cutting force Ultrasonic Assisted Drilling of Carbon Fiber Reinforced Plastic Composites with Non-Rotating Vibratory Tool [Volume 9, Issue 1, 2022, Pages 147-154]
  • Cylindrical and Conical Corrugated Tubes Crushing Analysis of Empty and Foam-Filled Cylindrical and Conical Corrugated Composite Tubes [Volume 6, Issue 1, 2019, Pages 35-44]
  • Cylindrical bending Higher-order Displacement Model for Cylindrical Bending of Laminated and Sandwich Plates Subjected to Environmental Loads [Volume 8, Issue 1, 2021, Pages 185-201]
  • Cylindrical-Conical Composite Shells Free Vibration Analysis of Combined Cylindrical-Conical Composite Shells using First-Order Shear Deformation Theory [Volume 8, Issue 2, 2021, Pages 269-282]
  • Cylindrical panel Elasticity Solution of Functionally Graded Carbon Nanotube Reinforced Composite Cylindrical Panel [Volume 1, Issue 1, 2014, Pages 49-60]
  • Cylindrical shell Dynamic Characteristics of Joined Steel and Carbon Fiber-Reinforced Plastic Tubes: Experimental and Numerical Investigation [Volume 4, Issue 2, 2017, Pages 88-97]
  • Cylindrical shell Buckling analysis of FML cylindrical shells under combined axial and torsional loading [Volume 7, Issue 2, 2020, Pages 263-270]
  • Cylindrical shells Buckling Analysis of Composite Grid-Stiffened Cylindrical Shells Using a Generalized Equivalent Single Layer Theory [Volume 8, Issue 2, 2021, Pages 455-466]

D

  • Damaged area Size Effect on the Damaged Areas of Glass/Epoxy Structures under Low Velocity Impact [Volume 1, Issue 2, 2014, Pages 81-85]
  • Damage identification Damage Detection in Concrete Filled Tube Columns Based on Experimental Modal Data and Wavelet Technique [Volume 7, Issue 2, 2020, Pages 245-254]
  • Damage law Modeling of Hygrothermal Damage of Composite Materials [Volume 3, Issue 2, 2016, Pages 137-144]
  • Damage mechanisms Mechanical and Physical Properties of Glass-Fiber Reinforced Polymer Rods Manufactured by Different Pultrusion Methods [Volume 8, Issue 1, 2021, Pages 99-107]
  • Damping Studies on Progress of Aluminium Based Composites for Automotive Applications and its Damping Characteristics – A Review [(Articles in Press)]
  • DCP Curing Cured Poly(ethylene-g-maleic anhydride)/Graphene Nanocomposite: Properties and Characterization [Volume 5, Issue 1, 2018, Pages 1-12]
  • DCPD Investigation of Capsulated Epoxy and DCPD in Epoxy Based Self-healing Composites - DFT Calculation and Experimental Analysis [Volume 5, Issue 2, 2018, Pages 165-171]
  • Deep drawing Using the Taguchi Method for Experimental and Numerical Investigations on the Square-Cup Deep-Drawing Process for Aluminum/Steel Laminated Sheets [Volume 4, Issue 2, 2017, Pages 169-177]
  • Defect Effect of Curvature on the Mechanical Properties of Graphene: A Density Functional Tight-binding Approach [Volume 3, Issue 1, 2016, Pages 9-13]
  • Deficiencies Strengthening of Deficient Steel Sections using CFRP Composite under Combined Loading [Volume 7, Issue 2, 2020, Pages 287-296]
  • Delamination Propagation of Matrix Cracking and Induced Delaminatin in Cross-Ply Composite Beams Subjected to Bending Loads [Volume 6, Issue 1, 2019, Pages 45-50]
  • Delamination Delamination Analysis in Composite Root of a Carbon-Layer Reinforced Wind Turbine Blade [Volume 6, Issue 1, 2019, Pages 9-18]
  • Delamination Ultrasonic Assisted Drilling of Carbon Fiber Reinforced Plastic Composites with Non-Rotating Vibratory Tool [Volume 9, Issue 1, 2022, Pages 147-154]
  • Delamination Multi-response Optimization while Drilling of Composite Laminate with Core Drill by Grey Entropy Fuzzy (GEF) Method [Volume 11, Issue 2, 2024, Pages 483-502]
  • Delamination Thrust Force and Delamination Analysis on Redmud-Filled Coconut Sheath Fiber Polyester Composite [(Articles in Press)]
  • Delamination detection Modal Characteristics of Composite Beams with Single Delamination- A Simple Analytical Technique [Volume 1, Issue 2, 2014, Pages 97-106]
  • Delonix Regia Fruit Fibers Influence of Filler Content on the Mechanical, Thermal, Moisture Absorption, and Biodegradability Properties of Bionanocomposite with Cellulosic Fibers Derived from Delonix Regia Fruits [Volume 11, Issue 1, 2024, Pages 73-86]
  • Density functional tight-binding Effect of Curvature on the Mechanical Properties of Graphene: A Density Functional Tight-binding Approach [Volume 3, Issue 1, 2016, Pages 9-13]
  • Design of experimentsm An Investigation on Three-Point Bending of Foam-Filled Double Tubes and Parameter Optimization Using Response Surface Methodology [Volume 8, Issue 1, 2021, Pages 41-50]
  • Detection of wood defects Numerical Optimization of Non-destructive Ultrasonic Testing in Identifying Defects in Composite Structure of Pine Tree Trunk [Volume 11, Issue 1, 2024, Pages 249-258]
  • DFT Investigation of Capsulated Epoxy and DCPD in Epoxy Based Self-healing Composites - DFT Calculation and Experimental Analysis [Volume 5, Issue 2, 2018, Pages 165-171]
  • Different fibers arrangement 3D Numerical Simulation of Fibers Arrangement Effects On Thermal Conductivity of Polymer Matrix Composite [Volume 9, Issue 1, 2022, Pages 59-73]
  • Differential transform method Analytical and Numerical Solution of Heat Transfer Equation in Rectangular Composite Fins [Volume 9, Issue 1, 2022, Pages 199-211]
  • Discrete variable A Novel Hybrid Genetic Modified Colliding Bodies Optimization for Designing of Composite Laminates [Volume 8, Issue 1, 2021, Pages 203-212]
  • Dispersion curves Propagation Behavior of Love-Type Waves in a Poro-elastic Medium using Staggered Grid Finite Difference Scheme [Volume 8, Issue 2, 2021, Pages 359-365]
  • Displacement control Mechanical Properties of Graphene/Epoxy Nanocomposites under Static and Flexural Fatigue Loadings [Volume 1, Issue 1, 2014, Pages 1-7]
  • Division method The Effect of Temperature Dependency on the Thermo-Electro-Elastic Analysis of Functionally Graded Piezoelectric Spherical Shell [Volume 6, Issue 1, 2019, Pages 1-8]
  • DMTA analysis Experimental Study on Dynamic Behavior of Acrylonitrile-Butadiene-Styrene (ABS) Based Nano Composite Reinforced by Nano Silica Addition [Volume 7, Issue 2, 2020, Pages 313-320]
  • DQM Size-dependent Effects on the Vibration Behavior of a Ti-moshenko Microbeam subjected to Pre-stress Loading based on DQM [Volume 3, Issue 2, 2016, Pages 99-112]
  • DQM Nonlinear Magneto-Nonlocal Vibration Analysis of Coupled Piezoelectric Micro-Plates Reinforced with Agglomerated CNTs [Volume 7, Issue 1, 2020, Pages 109-119]
  • DQM Transient Solution of Heat and Moisture Transfer in a Functionally Graded Hollow Cylinder with Finite Length [Volume 9, Issue 1, 2022, Pages 49-57]
  • DQM Numerical Investigation on Free Vibration Response of Bi-Directional Porous Functionally Graded Circular/Annular Plates [Volume 9, Issue 2, 2022, Pages 243-262]
  • Drilling Ultrasonic Assisted Drilling of Carbon Fiber Reinforced Plastic Composites with Non-Rotating Vibratory Tool [Volume 9, Issue 1, 2022, Pages 147-154]
  • Drilling Thrust Force and Delamination Analysis on Redmud-Filled Coconut Sheath Fiber Polyester Composite [(Articles in Press)]
  • DR method Buckling Analysis of Functionally Graded Cylindrical Shells Under Mechanical and Thermal Loads by Dynamic Relaxation Method [Volume 7, Issue 2, 2020, Pages 297-311]
  • DR method Buckling Analysis of Nano Composite Plates Based on Combination of the Incremental Load Technique and Dynamic Relaxation Method [Volume 8, Issue 1, 2021, Pages 133-148]
  • Dropped-off plies Crashworthy Behavior of Plain Weave Glass/Epoxy Composite Tubes Containing Different Extents of Overlap of Dropped Plies [Volume 11, Issue 1, 2024, Pages 87-102]
  • Dual-phase-lag thermoelastic model Thermoelastic Interaction in a Three-Dimensional Layered Sandwich Structure [Volume 5, Issue 2, 2018, Pages 187-198]
  • Duck bone gelatin Physical and Mechanical Properties of Biodegradable Film from Taro Starch (Xanthosoma Sagittifolium) and Duck Bone Gelatin [Volume 9, Issue 2, 2022, Pages 213-220]
  • Dynamic response The Effects of the Moving Load and the Attached Mass-Spring-Damper System Interactions on the Dynamic Responses of the Composite Plates: An Analytical Approach [Volume 2, Issue 1, 2015, Pages 17-30]
  • Dynamic response Elasto-dynamic Response Analysis of a Curved Composite Sandwich Beam Subjected to the Loading of a Moving Mass [Volume 7, Issue 2, 2020, Pages 347-354]
  • Dynamic Stability Influence of Hygrothermal Environment and FG Material on Natural Frequency and Parametric Instability of Plates [Volume 7, Issue 1, 2020, Pages 89-101]
  • Dynamic stiffness method Dynamic Stiffness Method for Free Vibration of Moderately Thick Functionally Graded Plates [Volume 3, Issue 1, 2016, Pages 15-30]

E

  • EDSanalysis Microstructure & Mechanical Properties Evaluation of Al6082 /AlSi10Mg Composite for Light Weight Structural Applications [Volume 11, Issue 2, 2024, Pages 309-320]
  • Effective matrix Numerical Simulation of a Hybrid Nanocomposite Containing Ca-CO3 and Short Glass Fibers Subjected to Tensile Loading [Volume 4, Issue 2, 2017, Pages 117-125]
  • Effect of temperature Active Vibration Control of Laminated Composite Beam Operating in Thermal Environment using PZT-5H Patches [Volume 9, Issue 2, 2022, Pages 387-398]
  • E-glass fibre Modeling the Buckling Characteristics of Pineapple Leaf Fibre Reinforced Laminated Epoxy Composites [Volume 10, Issue 2, 2023, Pages 233-246]
  • Eigen Value Approach Generalized Thermoelastic Interactions Using an Eigenvalue Technique in a Transversely Isotropic Unbounded Medium with Memory Having a Line Heat Source [Volume 11, Issue 2, 2024, Pages 413-424]
  • EIS Deposition of an Al/SiC Composite Coating on Steel by Friction Surfacing: Corrosion and Wear Properties [Volume 9, Issue 2, 2022, Pages 287-296]
  • Elastic foundation Nonlocal Buckling and Vibration Analysis of Triple-Walled ZnO Piezoelectric Timoshenko Nano-beam Subjected to Magneto-Electro-Thermo-Mechanical Loadings [Volume 2, Issue 2, 2015, Pages 113-126]
  • Elastic foundation Analytical Approach for Thermo-electro-mechanical Vibration of Piezoelectric Nanoplates Resting on Elastic Foundations based on Nonlocal Theory [Volume 6, Issue 2, 2019, Pages 117-129]
  • Elastic foundation A Meshfree Approach for Bending Analysis of Porous Rectangular FGM Plate Resting on Elastic Foundation [Volume 9, Issue 2, 2022, Pages 303-316]
  • Elasticity Elasticity Solution of Functionally Graded Carbon Nanotube Reinforced Composite Cylindrical Panel [Volume 1, Issue 1, 2014, Pages 49-60]
  • Elastic medium A Novel Method for Considering Interlayer Effects between Graphene Nanoribbons and Elastic Medium in Free Vibration Analysis [Volume 7, Issue 1, 2020, Pages 79-88]
  • Elastoplastic analysis Elastoplastic Analysis of Pressurized FG rotating Thick Cylinders Based on High-Order Shear Deformation Theory and Radial Return Method [Volume 11, Issue 1, 2024, Pages 119-130]
  • Electrical conductivity The Effect of the Solvents on Electrical Properties of POT Conducting Polymer [Volume 8, Issue 2, 2021, Pages 283-289]
  • Electrical conductivity Microstructure, Mechanical and Electrical Properties of Copper Matrix Composites Reinforced with Steel Nanoparticles [Volume 8, Issue 2, 2021, Pages 335-345]
  • Electrically open case Analysis of Electrically Shorted and Open Cases on Love Waves Propagating in Piezoelectric Layer embedded over a Fiber-reinforced Substrate [(Articles in Press)]
  • Electrically short case Analysis of Electrically Shorted and Open Cases on Love Waves Propagating in Piezoelectric Layer embedded over a Fiber-reinforced Substrate [(Articles in Press)]
  • Electromagnetic theory Influence of Electromagnetic Generalized Thermoelasticity Interactions with Nonlocal Effects under Temperature-Dependent Properties in a Solid Cylinder [Volume 10, Issue 1, 2023, Pages 157-166]
  • Electro-magneto-mechanical loadings Biaxial Buckling and Bending of Smart Nanocomposite Plate Reinforced by CNTs using Extended Mixture Rule Approach [Volume 1, Issue 1, 2014, Pages 17-26]
  • Electro-Mechanical Characterisation Experimental Investigation and Simulation of Electro-Mechanical Behaviour of Hybrid Sandwich Composite Radomes for Aerospace Applications [Volume 11, Issue 2, 2024, Pages 401-412]
  • Electro-mechanical loads Size-dependent Electro-Mechanical Vibration Analysis of FGPM Composite Plates using Modified Shear Deformation Theories [Volume 8, Issue 1, 2021, Pages 157-169]
  • Electro-rheological High-order Analysis of Linear Vibrations of a ModeratleyThick Sandwich Panel With an Electrorheological Core [Volume 7, Issue 2, 2020, Pages 177-188]
  • Elliptic Cylindrical Coordinate Mechanical Behavior and Optimization of Functionally Graded Hollow Cylinder with an Elliptic Hole [Volume 7, Issue 2, 2020, Pages 189-201]
  • Elliptic Hole Mechanical Behavior and Optimization of Functionally Graded Hollow Cylinder with an Elliptic Hole [Volume 7, Issue 2, 2020, Pages 189-201]
  • Energy absorbers Crashworthy Behavior of Plain Weave Glass/Epoxy Composite Tubes Containing Different Extents of Overlap of Dropped Plies [Volume 11, Issue 1, 2024, Pages 87-102]
  • Energy Absorption, Aluminum Foam Crushing Analysis of Empty and Foam-Filled Cylindrical and Conical Corrugated Composite Tubes [Volume 6, Issue 1, 2019, Pages 35-44]
  • Energy harvesting On the Nonlinear Dynamics of an Energy Harvesting Device Based on Magnetostriction [Volume 8, Issue 1, 2021, Pages 33-40]
  • Entropy Multi-response Optimization while Drilling of Composite Laminate with Core Drill by Grey Entropy Fuzzy (GEF) Method [Volume 11, Issue 2, 2024, Pages 483-502]
  • Epoxy Investigation of Capsulated Epoxy and DCPD in Epoxy Based Self-healing Composites - DFT Calculation and Experimental Analysis [Volume 5, Issue 2, 2018, Pages 165-171]
  • Epoxy-Carbon Simulation and Optimization of Fatigue Life of Carbon-Epoxy Composite Sub Frame [Volume 9, Issue 1, 2022, Pages 37-47]
  • Epoxy resin Effect of the Nature of Oxide Nanofillers on Changes in the Mechanical Properties of Epoxy Coatings under Thermal Cycling [Volume 10, Issue 1, 2023, Pages 195-204]
  • Equivalent delamination factor Multi-response Optimization while Drilling of Composite Laminate with Core Drill by Grey Entropy Fuzzy (GEF) Method [Volume 11, Issue 2, 2024, Pages 483-502]
  • ESDT Free Vibration Analysis of Size-Dependent Multi-Layered Graphene Sheets Based on Strain Gradient Elasticity Theory [Volume 9, Issue 2, 2022, Pages 275-285]
  • Eshelby-Mori-Tanaka Free Vibration Response of Agglomerated Carbon Nanotube-Reinforced Nanocomposite Plates [Volume 10, Issue 1, 2023, Pages 167-194]
  • Euler-Bernoulli beam theory Free Vibration and Buckling Analyses of Nanobeam Embedded in Pasternak Foundation [Volume 10, Issue 2, 2023, Pages 419-436]
  • Euler-Bernoulli theory A Novel Method for Considering Interlayer Effects between Graphene Nanoribbons and Elastic Medium in Free Vibration Analysis [Volume 7, Issue 1, 2020, Pages 79-88]
  • Exact solution Dynamic Stiffness Method for Free Vibration of Moderately Thick Functionally Graded Plates [Volume 3, Issue 1, 2016, Pages 15-30]
  • Exact solution Analytical and Numerical Solution of Heat Transfer Equation in Rectangular Composite Fins [Volume 9, Issue 1, 2022, Pages 199-211]
  • Experimental Analysis Design and Experimental/Numerical Analysis of Metal-Composite Vessel with Spherical Cap under Internal Pressure [Volume 10, Issue 2, 2023, Pages 247-256]
  • Experimental investigation Experimental investigation of the strength of glass fiber-reinforced concrete exposed to high temperature [Volume 5, Issue 2, 2018, Pages 103-113]
  • Experimental modal analysis Free Vibration Analysis of Graphene Reinforced Laminated Composite Plates using Experimental Modal Testing [Volume 10, Issue 2, 2023, Pages 363-374]
  • Experimental Study The Effect of Processing Conditions on the Mechanical Properties of Polypropylene/Mesoporous Silica-Hydroxyapatite Hybrid Nanocomposites [Volume 3, Issue 2, 2016, Pages 73-82]
  • Experimental Study Experimental and Numerical Study on the Strength of Repaired Steel Pipes with Composite Patches under Internal Pressure [Volume 10, Issue 2, 2023, Pages 437-448]
  • Exponential law Buckling Analysis of Functionally Graded Sandwich Beam Based on Third-Order Zigzag Theory [Volume 10, Issue 1, 2023, Pages 55-68]
  • Exponential shear deformation theory Fluid-Structure Interaction of Vibrating Composite Piezoelectric Plates Using Exponential Shear Deformation Theory [Volume 7, Issue 1, 2020, Pages 59-69]
  • Exponential shear deformation theory Free Vibrations Analysis of Functionally Graded Rectangular Nano-plates based on Nonlocal Exponential Shear Deformation Theory [Volume 2, Issue 2, 2015, Pages 79-93]
  • Extrusion Study on Compression and Flexural Behavior of ABS-SiO2 Poly-mer Matrix Composite Fabricated by Hot Extrusion [Volume 6, Issue 2, 2019, Pages 239-247]

F

  • Fabrication methods A Review of Research Outcomes on Fabrication Methods and Investigations for Evaluating Fracture Behavior of Aluminum Metal Matrix Composites with its Applications [Volume 8, Issue 2, 2021, Pages 347-358]
  • Failure Experimental and Numerical Investigation of Reinforcement Sheet Effect on the Bending Strength of Corrugated Composite Panels [Volume 8, Issue 1, 2021, Pages 1-13]
  • Failure mechanisms Damage Energy Evaluation in [55/-55]9 Composite Pipes using Acoustic Emission Method [Volume 2, Issue 2, 2015, Pages 127-134]
  • Failure Pressure Failure Pressure Prediction of Semi Spherical GFRP Shells in Thermal Environment [Volume 7, Issue 1, 2020, Pages 103-108]
  • Falkner-skan An Analytical Study on Effects of adding Nanoparticles to Water and Enhancement in Thermal Properties Based on Falkner-Skan Model [Volume 1, Issue 1, 2014, Pages 27-35]
  • Fast Fourier Transform Free Vibration Analysis of Graphene Reinforced Laminated Composite Plates using Experimental Modal Testing [Volume 10, Issue 2, 2023, Pages 363-374]
  • Fatigue Simulation and Optimization of Fatigue Life of Carbon-Epoxy Composite Sub Frame [Volume 9, Issue 1, 2022, Pages 37-47]
  • Fe3O4 Effects of reinforcement distribution on the mechanical properties of Al–Fe3O4 nanocomposites fabricated via accumulative roll bonding [Volume 5, Issue 2, 2018, Pages 131-139]
  • FEA Experimental and Numerical Analysis of Woven Bamboo and Jute Fiber Reinforced in Epoxy Composites [Volume 11, Issue 1, 2024, Pages 103-118]
  • FEM The Effect of External Skin on Buckling Strength of Composite Lattice Cylinders Based on Numerical and Experimental Analysis [Volume 3, Issue 2, 2016, Pages 83-87]
  • FEM Flexural Behaviour of Nanocomposite Plate with CNT Distribution and Agglomeration Effect [Volume 10, Issue 1, 2023, Pages 123-136]
  • FE method Free Vibration Response of Agglomerated Carbon Nanotube-Reinforced Nanocomposite Plates [Volume 10, Issue 1, 2023, Pages 167-194]
  • FEM solution Analytical and Numerical Solution of Heat Transfer Equation in Rectangular Composite Fins [Volume 9, Issue 1, 2022, Pages 199-211]
  • FG bio-micro-beam Vibration Characteristics of Functionally Graded Micro-Beam Carrying an Attached Mass [Volume 7, Issue 1, 2020, Pages 49-58]
  • FG composite Free Natural Frequency Analysis of an FG Composite Rectangular Plate Coupled with Fluid using Rayleigh–Ritz Method [Volume 1, Issue 2, 2014, Pages 131-143]
  • FGM Elastic analysis of Shrink-fitted Thick FGM Cylinders Based on Linear Plane Elasticity Theory [Volume 7, Issue 1, 2020, Pages 121-127]
  • FGM Finite Difference Analysis of 2D Stress Wave Propagation in Two Dimensional Functionally Graded Ceramics-Metals Composites [Volume 8, Issue 2, 2021, Pages 321-334]
  • FGM Transient Solution of Heat and Moisture Transfer in a Functionally Graded Hollow Cylinder with Finite Length [Volume 9, Issue 1, 2022, Pages 49-57]
  • FGM annular sector plate Numerical Investigation on Thermal Post-buckling Of Annular Sector Plates Made of FGM Via 3D Finite Element Method [Volume 8, Issue 2, 2021, Pages 309-320]
  • FGM beam Bending, buckling and free vibration responses of hyperbolic shear deformable FGM beams [Volume 5, Issue 1, 2018, Pages 13-24]
  • FGM Plate A Meshfree Approach for Bending Analysis of Porous Rectangular FGM Plate Resting on Elastic Foundation [Volume 9, Issue 2, 2022, Pages 303-316]
  • FGM Plate Initial Buckling Behavior of Elastically Supported Rectangular FGM Plate based on Higher Order Shear Deformation Theory via Spline RBF Method [Volume 11, Issue 1, 2024, Pages 59-72]
  • FG plate Assessment of RBFs Based Meshfree Method for the Vibration Response of FGM Rectangular Plate Using HSDT Model [Volume 10, Issue 1, 2023, Pages 137-150]
  • FGPM Transient Thermal Stresses Analysis in a FPGM Cylinder [Volume 6, Issue 2, 2019, Pages 81-94]
  • FGPM Size-dependent Electro-Mechanical Vibration Analysis of FGPM Composite Plates using Modified Shear Deformation Theories [Volume 8, Issue 1, 2021, Pages 157-169]
  • FGPM Cylinders Electro-Elastic Analysis of Finite Length FGPM Cylinders Subjected to Electromechanical Loading Using First-Order Electric Potential Theory [Volume 8, Issue 1, 2021, Pages 15-31]
  • FG shell Buckling Analysis of Functionally Graded Cylindrical Shells Under Mechanical and Thermal Loads by Dynamic Relaxation Method [Volume 7, Issue 2, 2020, Pages 297-311]
  • Fiber Metal Laminate Vibration Optimization of Fiber-Metal Laminated Composite Shallow Shell Panels Using an Adaptive PSO Algorithm [Volume 4, Issue 2, 2017, Pages 99-110]
  • Fiber-metal laminates Flexural Behavior of Fiber–Metal Laminates Reinforced with Surface-Functionalized Nanoclay [Volume 5, Issue 2, 2018, Pages 149-156]
  • Fiber metal laminates (FMLs) Environmental Effects on Mechanical Properties of Glass/Epoxy and Fiber Metal Laminates, Part I: Hygrothermal Aging [Volume 4, Issue 3, 2017, Pages 187-196]
  • Fiber metal laminates (FMLs) Environmental effects on mechanical properties of glass/epoxy and fiber metal laminates, Part II: Isothermal aging [Volume 4, Issue 3, 2017, Pages 197-205]
  • Fiber metal laminates (FMLs) Buckling analysis of FML cylindrical shells under combined axial and torsional loading [Volume 7, Issue 2, 2020, Pages 263-270]
  • Fiber-Reinforced Concrete Composite (HPFRCC) Strengthening of One-Way Slabs Using Composite Laminates of HPFRCC Including Synthetic Fibers PPS [Volume 9, Issue 1, 2022, Pages 185-197]
  • Fiber-Reinforced hybrid composites Short Literature Survey on Fiber-Reinforced Hybrid Composites [Volume 11, Issue 2, 2024, Pages 425-452]
  • Fick’s law Modeling of Hygrothermal Damage of Composite Materials [Volume 3, Issue 2, 2016, Pages 137-144]
  • Fifth-order theory A New Higher-Order Shear and Normal Deformation Theory for the Free Vibration Analysis of Laminated Shells [Volume 9, Issue 1, 2022, Pages 89-104]
  • Film temperature Atomic Simulation of Temperature Effect on the Mechanical Properties of Thin Films [Volume 2, Issue 1, 2015, Pages 31-38]
  • Finite Difference Finite Difference Analysis of 2D Stress Wave Propagation in Two Dimensional Functionally Graded Ceramics-Metals Composites [Volume 8, Issue 2, 2021, Pages 321-334]
  • Finite element Capillary Effects on Surface Enhancement in a Non-Homogeneous Fibrous Porous Medium [Volume 5, Issue 1, 2018, Pages 83-90]
  • Finite element Failure Pressure Prediction of Semi Spherical GFRP Shells in Thermal Environment [Volume 7, Issue 1, 2020, Pages 103-108]
  • Finite element analysis Material Mechanical Properties Prediction of Layer with Multidirectional Fiber Ply Reinforced Polymer Matrix Composites [Volume 9, Issue 2, 2022, Pages 221-227]
  • Finite element analysis Finite Element Analysis of Mechanical Properties of Basalt-Carbon Epoxy Hybrid Laminates [Volume 9, Issue 2, 2022, Pages 263-274]
  • Finite element analysis Numerical Analysis of Thermal Buckling of Honeycomb Core Sandwich Panel under Thermal Loading [Volume 10, Issue 2, 2023, Pages 333-342]
  • Finite element method (FEM) Modal Characteristics of Composite Beams with Single Delamination- A Simple Analytical Technique [Volume 1, Issue 2, 2014, Pages 97-106]
  • Finite element method (FEM) Buckling analysis of FML cylindrical shells under combined axial and torsional loading [Volume 7, Issue 2, 2020, Pages 263-270]
  • Finite Element methods Experimental and Finite Element Studies on Free Vibration of Areca Leaf Sheath Reinforced Polymer Composites [Volume 8, Issue 2, 2021, Pages 367-388]
  • Finite element modeling Modeling the Buckling Characteristics of Pineapple Leaf Fibre Reinforced Laminated Epoxy Composites [Volume 10, Issue 2, 2023, Pages 233-246]
  • Finite element simulation Using the Taguchi Method for Experimental and Numerical Investigations on the Square-Cup Deep-Drawing Process for Aluminum/Steel Laminated Sheets [Volume 4, Issue 2, 2017, Pages 169-177]
  • Finite strain Size-dependent Bending of Geometrically Nonlinear of Micro-Laminated Composite Beam based on Modified Couple Stress Theory [Volume 3, Issue 1, 2016, Pages 53-62]
  • Finite strip method Dynamic Stability of Moderately Thick Composite Laminated Skew Plates using Finite Strip Method [Volume 2, Issue 2, 2015, Pages 145-150]
  • Finite wave speed Elasto-Thermodiffusive Response in a Two-Dimensional Transversely Isotropic Medium [Volume 6, Issue 2, 2019, Pages 95-104]
  • Finite wave speed Thermoelastic Interaction in a Three-Dimensional Layered Sandwich Structure [Volume 5, Issue 2, 2018, Pages 187-198]
  • Fire Resistance Experimental Investigating to Increases the Fire Resistance of the Ultra-High-Performance Concrete by using Hybrid Fibers [Volume 9, Issue 2, 2022, Pages 377-386]
  • First-Order Electrical Potential theory Electro-Elastic Analysis of Finite Length FGPM Cylinders Subjected to Electromechanical Loading Using First-Order Electric Potential Theory [Volume 8, Issue 1, 2021, Pages 15-31]
  • First-order shear deformation plate theory Non-Linear Analysis of Functionally Graded Sector Plates with Simply Supported Radial Edges Under Transverse Loading [Volume 6, Issue 1, 2019, Pages 65-74]
  • First-order shear deformation theory Dynamic Stiffness Method for Free Vibration of Moderately Thick Functionally Graded Plates [Volume 3, Issue 1, 2016, Pages 15-30]
  • First-order shear deformation theory Mesh-free Dynamic Analyses of FGM Sandwich Plates Resting on A Pasternak Elastic Foundation [Volume 4, Issue 2, 2017, Pages 153-168]
  • First-order shear deformation theory Free Vibration Analysis of Combined Cylindrical-Conical Composite Shells using First-Order Shear Deformation Theory [Volume 8, Issue 2, 2021, Pages 269-282]
  • First-order shear deformation theory Buckling Analysis of Sandwich Timoshenko Nanobeams with AFG Core and Two Metal Face-Sheets [Volume 10, Issue 2, 2023, Pages 319-332]
  • First-order shear deformation theory Free Vibration Analysis of Simply Supported and Clamped Functionally Graded Rectangular Plate Using Coupled Displacement Field Method [(Articles in Press)]
  • First-order shear deformation theory (FSDT) Thermoelastic Analysis of a Functionally Graded Simple Blade Using First-Order Shear Deformation Theory [Volume 7, Issue 1, 2020, Pages 147-155]
  • Flexoelectric nanobeam Vibration in an Electrically Affected Hygro-magneto-thermo-flexo Electric Nanobeam Embedded in Winkler-Pasternak Foundation [Volume 8, Issue 2, 2021, Pages 401-414]
  • Flexural Study on Compression and Flexural Behavior of ABS-SiO2 Poly-mer Matrix Composite Fabricated by Hot Extrusion [Volume 6, Issue 2, 2019, Pages 239-247]
  • Flexural Experimental and Numerical Analysis of Woven Bamboo and Jute Fiber Reinforced in Epoxy Composites [Volume 11, Issue 1, 2024, Pages 103-118]
  • Flexural bending fatigue Mechanical Properties of Graphene/Epoxy Nanocomposites under Static and Flexural Fatigue Loadings [Volume 1, Issue 1, 2014, Pages 1-7]
  • Flexural properties Environmental Effects on Mechanical Properties of Glass/Epoxy and Fiber Metal Laminates, Part I: Hygrothermal Aging [Volume 4, Issue 3, 2017, Pages 187-196]
  • Flexural properties Environmental effects on mechanical properties of glass/epoxy and fiber metal laminates, Part II: Isothermal aging [Volume 4, Issue 3, 2017, Pages 197-205]
  • Flexural strength Mechanical and Tribological Behaviors of Chopped Carbon/Glass Fiber Reinforced Hybrid Epoxy Composites [Volume 9, Issue 2, 2022, Pages 349-358]
  • Flexure Static Flexure of Soft Core Sandwich Beams using Trigonometric Shear Deformation Theory [Volume 2, Issue 1, 2015, Pages 45-53]
  • Fluid-structure interaction Fluid-Structure Interaction of Vibrating Composite Piezoelectric Plates Using Exponential Shear Deformation Theory [Volume 7, Issue 1, 2020, Pages 59-69]
  • Flutter speed Parametric Analysis of Position and Direction of Laminated Composite C-Spar on Aeroelastic Flutter in Aircraft Tail [Volume 11, Issue 2, 2024, Pages 351-362]
  • FML and composite cylindrical shells Discrepancies Between Free Vibration of FML and Composite Cylindrical Shells Reinforced by CNTs [Volume 6, Issue 2, 2019, Pages 105-115]
  • Foam-filled tubes An Investigation on Three-Point Bending of Foam-Filled Double Tubes and Parameter Optimization Using Response Surface Methodology [Volume 8, Issue 1, 2021, Pages 41-50]
  • Foaming conditions Influence of Different Foaming Conditions on the Mechanical, Physical, and Structural Properties of Polypropylene Foam [Volume 6, Issue 2, 2019, Pages 225-237]
  • Forced vibration Isogeometric Free and Forced Vibration Analyses of FG-CNTs Plates based on a Logarithmic Higher-Order Shear Deformation Theory [Volume 8, Issue 2, 2021, Pages 435-453]
  • Foundation Initial Buckling Behavior of Elastically Supported Rectangular FGM Plate based on Higher Order Shear Deformation Theory via Spline RBF Method [Volume 11, Issue 1, 2024, Pages 59-72]
  • Fractography Effects of reinforcement distribution on the mechanical properties of Al–Fe3O4 nanocomposites fabricated via accumulative roll bonding [Volume 5, Issue 2, 2018, Pages 131-139]
  • Fractography Mechanical Characterization and Wear Behavior of Nano TiO2 Particulates Reinforced Al7075 Alloy Composites [Volume 7, Issue 1, 2020, Pages 71-78]
  • Fracture behavior The Effect of Nano-B4C Additive on Microstructure and Mechanical Properties of Pressureless Sintering SiC Bodies [Volume 10, Issue 1, 2023, Pages 29-42]
  • Fracture surface Flexural Behavior of Fiber–Metal Laminates Reinforced with Surface-Functionalized Nanoclay [Volume 5, Issue 2, 2018, Pages 149-156]
  • Fracture toughness Effect of Aging on Fracture Toughness of Al6061-Graphite Particulate Composites [Volume 6, Issue 2, 2019, Pages 139-146]
  • Free Boundaries Theoretical, numerical, and experimental analyses of free vibrations of glass fiber reinforced polymer plates with central cutouts and free boundaries [Volume 5, Issue 1, 2018, Pages 67-74]
  • Free surface Capillary Effects on Surface Enhancement in a Non-Homogeneous Fibrous Porous Medium [Volume 5, Issue 1, 2018, Pages 83-90]
  • Free vibration Free Vibration of Lattice Cylindrical Composite Shell Reinforced with Carbon Nano-tubes [Volume 2, Issue 1, 2015, Pages 61-72]
  • Free vibration Free Vibration Analysis of 2D Functionally Graded Annular Plate considering the Effect of Material Composition via 2D Differential Quadrature Method [Volume 2, Issue 2, 2015, Pages 95-111]
  • Free vibration Dynamic Stiffness Method for Free Vibration of Moderately Thick Functionally Graded Plates [Volume 3, Issue 1, 2016, Pages 15-30]
  • Free vibration Static and Free Vibration Analyses of Functionally Graded Nano-composite Plates Reinforced by Wavy Carbon Nanotubes Resting on a Pasternak Elastic Foundation [Volume 3, Issue 2, 2016, Pages 123-135]
  • Free vibration Free Vibration and Buckling Analyses of Functionally Graded Nanocomposite Plates Reinforced by Carbon Nanotube [Volume 4, Issue 1, 2017, Pages 59-73]
  • Free vibration Dynamic Characteristics of Joined Steel and Carbon Fiber-Reinforced Plastic Tubes: Experimental and Numerical Investigation [Volume 4, Issue 2, 2017, Pages 88-97]
  • Free vibration A Numerical and Analytical Solution for the Free Vibration of Laminated Composites Using Different Plate Theories [Volume 4, Issue 1, 2017, Pages 75-87]
  • Free vibration Theoretical, numerical, and experimental analyses of free vibrations of glass fiber reinforced polymer plates with central cutouts and free boundaries [Volume 5, Issue 1, 2018, Pages 67-74]
  • Free vibration Discrepancies Between Free Vibration of FML and Composite Cylindrical Shells Reinforced by CNTs [Volume 6, Issue 2, 2019, Pages 105-115]
  • Free vibration A New Three-Dimensional Refined Higher-Order Theory for Free Vibration Analysis of Composite Circular Cylindrical Shells [Volume 6, Issue 2, 2019, Pages 201-223]
  • Free vibration Thermal Buckling and Thermal Induced free Vibration Analysis of Perforated Composite Plates: a Mathematical Model [Volume 7, Issue 1, 2020, Pages 15-23]
  • Free vibration Influence of Hygrothermal Environment and FG Material on Natural Frequency and Parametric Instability of Plates [Volume 7, Issue 1, 2020, Pages 89-101]
  • Free vibration High-order Analysis of Linear Vibrations of a ModeratleyThick Sandwich Panel With an Electrorheological Core [Volume 7, Issue 2, 2020, Pages 177-188]
  • Free vibration Free Vibration Analysis of Combined Cylindrical-Conical Composite Shells using First-Order Shear Deformation Theory [Volume 8, Issue 2, 2021, Pages 269-282]
  • Free vibration Size-dependent Electro-Mechanical Vibration Analysis of FGPM Composite Plates using Modified Shear Deformation Theories [Volume 8, Issue 1, 2021, Pages 157-169]
  • Free vibration Frequency Analysis of Functionally Graded Carbon Nanotube-reinforced Cylindrical Panels by Mesh-free Galerkin Method [Volume 8, Issue 2, 2021, Pages 415-424]
  • Free vibration Isogeometric Free and Forced Vibration Analyses of FG-CNTs Plates based on a Logarithmic Higher-Order Shear Deformation Theory [Volume 8, Issue 2, 2021, Pages 435-453]
  • Free vibration A New Higher-Order Shear and Normal Deformation Theory for the Free Vibration Analysis of Laminated Shells [Volume 9, Issue 1, 2022, Pages 89-104]
  • Free vibration Investigation of Free Vibration of Laminated Composite Conical Shell with Local Attached Mass [Volume 9, Issue 1, 2022, Pages 173-184]
  • Free vibration Assessment of RBFs Based Meshfree Method for the Vibration Response of FGM Rectangular Plate Using HSDT Model [Volume 10, Issue 1, 2023, Pages 137-150]
  • Free vibration Free Vibration and Buckling Analyses of Nanobeam Embedded in Pasternak Foundation [Volume 10, Issue 2, 2023, Pages 419-436]
  • Free vibration Investigation of Free Vibration in Fluid-Loaded Cylindrical Shells with a Three-Layer Sandwich Wall and an Auxetic Central Layer [(Articles in Press)]
  • Free vibration behaviour Free Vibration Analysis of 2D Functionally Graded Porous Beams Using Novel Higher-Order Theory [Volume 10, Issue 1, 2023, Pages 69-84]
  • Frequency Optimization of Hybrid Composite Laminate Based on the Frequency using Imperialist Competitive Algorithm [Volume 1, Issue 1, 2014, Pages 37-48]
  • Frequency Free Vibration Response of Agglomerated Carbon Nanotube-Reinforced Nanocomposite Plates [Volume 10, Issue 1, 2023, Pages 167-194]
  • Frequency Analysis Vibration Analysis of Circular Single-Layer Graphene Sheet Using Finite Element Method [Volume 6, Issue 2, 2019, Pages 131-138]
  • Frequency parameters Free Vibration Analysis of Simply Supported and Clamped Functionally Graded Rectangular Plate Using Coupled Displacement Field Method [(Articles in Press)]
  • Friction A Case Study on the Influence of Friction Coefficient and Rotational Speed on Transient Thermoelastic Response of FGM Rotating Cylinder [Volume 9, Issue 2, 2022, Pages 399-408]
  • Friction Materials The Role of Natural Additives on the Wear and Friction Proper-ties of Nanocomposites for Friction Applications [Volume 6, Issue 2, 2019, Pages 159-165]
  • Friction Surfacing Deposition of an Al/SiC Composite Coating on Steel by Friction Surfacing: Corrosion and Wear Properties [Volume 9, Issue 2, 2022, Pages 287-296]
  • FSI Sensitivity Analysis of Vibrating Laminated Composite Rec-tangular Plates in Interaction with Inviscid Fluid Using EFAST Method [Volume 7, Issue 2, 2020, Pages 219-231]
  • Functional graded material Mesh-free Dynamic Analyses of FGM Sandwich Plates Resting on A Pasternak Elastic Foundation [Volume 4, Issue 2, 2017, Pages 153-168]
  • Functional graded materials Thermoelastic Analysis of a Functionally Graded Simple Blade Using First-Order Shear Deformation Theory [Volume 7, Issue 1, 2020, Pages 147-155]
  • Functionalization Experimental Study on Amine-Functionalized Carbon Nanotubes’ Effect on the Thermomechanical Properties of CNT/Epoxy Nano-composites [Volume 5, Issue 1, 2018, Pages 41-48]
  • Functionally graded A Quasi-3D Polynomial Shear and Normal Deformation Theory for Laminated Composite, Sandwich, and Functionally Graded Beams [Volume 4, Issue 2, 2017, Pages 139-152]
  • Functionally graded Free Vibration Analysis of Size-Dependent, Functionally Graded, Rectangular Nano/Micro-plates based on Modified Nonlinear Couple Stress Shear Deformation Plate Theories [Volume 4, Issue 2, 2017, Pages 127-137]
  • Functionally graded Effect of Elastically Restrained Edges on Free Transverse Vibration of Functionally Graded Porous Rectangular Plate [Volume 9, Issue 2, 2022, Pages 335-348]
  • Functionally graded Analytical Modeling of Functionally Graded Carbon Nanotube-Reinforced Composite Plates under Low-Velocity Impact [Volume 11, Issue 2, 2024, Pages 281-294]
  • Functionally graded beam On Numerical Investigation of Buckling in Two-Directional Porous Functionally Graded Beam Using Higher Order Shear Deformation Theory [Volume 10, Issue 2, 2023, Pages 393-406]
  • Functionally graded beams An Investigation of Stress and Deformation Behavior of Functionally Graded Timoshenko Beams subjected to Thermo-Mechanical Load [Volume 7, Issue 1, 2020, Pages 157-176]
  • Functionally graded core Buckling Analysis of Sandwich Timoshenko Nanobeams with AFG Core and Two Metal Face-Sheets [Volume 10, Issue 2, 2023, Pages 319-332]
  • Functionally graded materails Experimental Investigation of FGM Dental Implant Properties Made from Ti/HA Composite [Volume 4, Issue 3, 2017, Pages 233-237]
  • Functionally Graded Material Free Vibration Analysis of 2D Functionally Graded Annular Plate considering the Effect of Material Composition via 2D Differential Quadrature Method [Volume 2, Issue 2, 2015, Pages 95-111]
  • Functionally Graded Material Dynamic Stiffness Method for Free Vibration of Moderately Thick Functionally Graded Plates [Volume 3, Issue 1, 2016, Pages 15-30]
  • Functionally Graded Material Thermoelastic Analysis of Compressor Spool in Turbojet Engine and Redesign it Using Functionally Graded Materials with Opti-mal Coefficients [Volume 6, Issue 2, 2019, Pages 167-179]
  • Functionally Graded Material Mechanical Behavior and Optimization of Functionally Graded Hollow Cylinder with an Elliptic Hole [Volume 7, Issue 2, 2020, Pages 189-201]
  • Functionally Graded Material Thermo–Elastic Stresses and Deformation Analysis of FG Rotating Hollow Spherical Body [Volume 9, Issue 1, 2022, Pages 125-136]
  • Functionally Graded Material A Case Study on the Influence of Friction Coefficient and Rotational Speed on Transient Thermoelastic Response of FGM Rotating Cylinder [Volume 9, Issue 2, 2022, Pages 399-408]
  • Functionally Graded Material Buckling Analysis of Functionally Graded Sandwich Beam Based on Third-Order Zigzag Theory [Volume 10, Issue 1, 2023, Pages 55-68]
  • Functionally Graded Material Higher Order Approximations for Bending of FG Beams Using B-Spline Collocation Technique [Volume 11, Issue 1, 2024, Pages 159-176]
  • Functionally Graded Material Propagation of shear horizontal wave at magneto-electro-elastic structure subjected to mechanically imperfect interface [(Articles in Press)]
  • Functionally Graded Material Plates Influence of Hygrothermal Environment and FG Material on Natural Frequency and Parametric Instability of Plates [Volume 7, Issue 1, 2020, Pages 89-101]
  • Functionally graded materials Non-Linear Analysis of Functionally Graded Sector Plates with Simply Supported Radial Edges Under Transverse Loading [Volume 6, Issue 1, 2019, Pages 65-74]
  • Functionally graded materials Finite Element Modeling for Buckling Analysis of Tapered Axially Functionally Graded Timoshenko Beam on Elastic Foundation [Volume 7, Issue 2, 2020, Pages 203-218]
  • Functionally graded materials A Semi-Analytical Nonlinear Approach for Size-Dependent Analysis of Longitudinal Vibration in Terms of Axially Functionally Graded Nanorods [Volume 11, Issue 2, 2024, Pages 453-466]
  • Functionally graded nanoplates Free Vibrations Analysis of Functionally Graded Rectangular Nano-plates based on Nonlocal Exponential Shear Deformation Theory [Volume 2, Issue 2, 2015, Pages 79-93]
  • Functionally graded piezoelectric material Functionally Graded Piezoelectric Plates in Cylindrical Bending by Semi-analytical Approach [Volume 9, Issue 2, 2022, Pages 409-424]
  • Functionally graded porous Buckling and Nonlinear Vibration of Functionally Graded Porous Micro-beam Resting on Elastic Foundation [Volume 9, Issue 1, 2022, Pages 75-88]
  • Functionally graded spherical shell The Effect of Temperature Dependency on the Thermo-Electro-Elastic Analysis of Functionally Graded Piezoelectric Spherical Shell [Volume 6, Issue 1, 2019, Pages 1-8]
  • Fundamental frequency Maximization of Fundamental Frequency of Composite Stiffened Hypar Shell with Cutout by Taguchi Method [Volume 10, Issue 1, 2023, Pages 43-54]
  • Fused Deposition Modeling Tensile and Flexural Properties of 3D-Printed Polylactic Acid/Continuous Carbon Fiber Composite [Volume 10, Issue 2, 2023, Pages 407-418]
  • Fuzzy logics Multi-response Optimization while Drilling of Composite Laminate with Core Drill by Grey Entropy Fuzzy (GEF) Method [Volume 11, Issue 2, 2024, Pages 483-502]

G

  • Galerkin method Fluid-Structure Interaction of Vibrating Composite Piezoelectric Plates Using Exponential Shear Deformation Theory [Volume 7, Issue 1, 2020, Pages 59-69]
  • Galerkin method On the Nonlinear Dynamics of an Energy Harvesting Device Based on Magnetostriction [Volume 8, Issue 1, 2021, Pages 33-40]
  • Galerkin method Investigation of Free Vibration of Laminated Composite Conical Shell with Local Attached Mass [Volume 9, Issue 1, 2022, Pages 173-184]
  • GDQEM Study of Laminated Composite MEMS and NEMS Performance in Nano Metric Operations [Volume 4, Issue 1, 2017, Pages 19-31]
  • GDQM Study of Laminated Composite MEMS and NEMS Performance in Nano Metric Operations [Volume 4, Issue 1, 2017, Pages 19-31]
  • Generalized differential quadrature Free Vibration Analysis of 2D Functionally Graded Annular Plate considering the Effect of Material Composition via 2D Differential Quadrature Method [Volume 2, Issue 2, 2015, Pages 95-111]
  • Generalized differential quadrature method Transverse Vibration for Non-uniform Timoshenko Nano-beams [Volume 2, Issue 1, 2015, Pages 1-16]
  • Generalized differential quadrature method Application of Bi-Directional Functionally Graded Material Model for Free Vibration Analysis of Rotating Euler-Bernoulli Nanobeams [Volume 8, Issue 2, 2021, Pages 389-399]
  • Generalized thermoelastic diffusion Elasto-Thermodiffusive Response in a Two-Dimensional Transversely Isotropic Medium [Volume 6, Issue 2, 2019, Pages 95-104]
  • Generalized thermoelasticity Thermoelastic Interaction in a Three-Dimensional Layered Sandwich Structure [Volume 5, Issue 2, 2018, Pages 187-198]
  • Generalized thermoelasticity Influence of Electromagnetic Generalized Thermoelasticity Interactions with Nonlocal Effects under Temperature-Dependent Properties in a Solid Cylinder [Volume 10, Issue 1, 2023, Pages 157-166]
  • Genetic algorithm Minimal Mass and Maximal Buckling Load of Composite Hexagonal-Triangle Grid Structure using FSDT under External Hydrostatic Pressure [Volume 10, Issue 2, 2023, Pages 309-318]
  • Geometrically nonlinearity Geometrically Nonlinear Analysis of Laminated Composite Plates subjected to Uniform Distributed Load Using a New Hypothesis: the finite element method (FEM) Approach [Volume 7, Issue 2, 2020, Pages 271-285]
  • Geometrical nonlinearity Vibration of MEE Composite Conical Shell Surrounded by Nonlinear Elastic Foundation Considering the Effect of Geometrical Nonlinearity [Volume 10, Issue 1, 2023, Pages 85-102]
  • GFRP Experimental and Numerical Investigation of the Effect of Embedding Steel Wires inside the Foam of GFRP/Foam Sandwich Panel under Three-Point Bending Load [Volume 11, Issue 2, 2024, Pages 271-280]
  • GFRP Plates Theoretical, numerical, and experimental analyses of free vibrations of glass fiber reinforced polymer plates with central cutouts and free boundaries [Volume 5, Issue 1, 2018, Pages 67-74]
  • Glass/Basalt fiber Mechanical Characterization of Glass-Basalt Hybrid Composites with Different Fiber Weight Fraction [Volume 11, Issue 2, 2024, Pages 295-308]
  • Glass/epoxy Experimental Investigation on Quasi-Static Impact Response of Glass/Epoxy Composite Corrugated Core Sandwich Panels [Volume 10, Issue 2, 2023, Pages 283-294]
  • Glass-Epoxy A Comparative Study on the Effect of HNT and Nano-Alumina Particles on the Mechanical Properties of Vacuum Bag Moulded Glass-Epoxy Nanocomposites [Volume 8, Issue 1, 2021, Pages 119-131]
  • Glass/epoxy composites Size Effect on the Damaged Areas of Glass/Epoxy Structures under Low Velocity Impact [Volume 1, Issue 2, 2014, Pages 81-85]
  • Glass/epoxy composites Environmental Effects on Mechanical Properties of Glass/Epoxy and Fiber Metal Laminates, Part I: Hygrothermal Aging [Volume 4, Issue 3, 2017, Pages 187-196]
  • Glass/epoxy composites Environmental effects on mechanical properties of glass/epoxy and fiber metal laminates, Part II: Isothermal aging [Volume 4, Issue 3, 2017, Pages 197-205]
  • Glass fiber Experimental investigation of the strength of glass fiber-reinforced concrete exposed to high temperature [Volume 5, Issue 2, 2018, Pages 103-113]
  • Glass fiber Mechanical and Physical Properties of Glass-Fiber Reinforced Polymer Rods Manufactured by Different Pultrusion Methods [Volume 8, Issue 1, 2021, Pages 99-107]
  • GPLs Nonlinear Dynamic Analysis of Annular FG Porous Sandwich Plates Reinforced by Graphene Platelets [Volume 11, Issue 1, 2024, Pages 131-148]
  • Graded layered foam Numerical Crashworthiness Analysis of Graded Layered Foam- Filled Tubes Under Axial Loading [Volume 6, Issue 1, 2019, Pages 57-64]
  • Grading index Thermo–Elastic Stresses and Deformation Analysis of FG Rotating Hollow Spherical Body [Volume 9, Issue 1, 2022, Pages 125-136]
  • Graphene Cured Poly(ethylene-g-maleic anhydride)/Graphene Nanocomposite: Properties and Characterization [Volume 5, Issue 1, 2018, Pages 1-12]
  • Graphene Vibration Analysis of Circular Single-Layer Graphene Sheet Using Finite Element Method [Volume 6, Issue 2, 2019, Pages 131-138]
  • Graphene Graphene-based Polymer Nano-composites - A Review [Volume 7, Issue 2, 2020, Pages 333-346]
  • Graphene Influence of Graphene Powder on the Physio-Mechanical Properties of Jute Reinforced Epoxy Composites for Automobile Applications [Volume 11, Issue 1, 2024, Pages 239-248]
  • Graphene Interfacial Characteristics of Graphene/Polymer Nanocomposites by Molecular Dynamics Simulation and Evaluating Effects of that on Mechanical Properties of Nanocomposites by FEM [Volume 11, Issue 2, 2024, Pages 321-334]
  • Graphene nanoplatelets Buckling Analysis of Sandwich Structures with Metamaterials Core Integrated by Graphene Nanoplatelets Reinforced Polymer Composite [Volume 10, Issue 1, 2023, Pages 1-10]
  • Graphene nano-platelets Mechanical Properties of Graphene/Epoxy Nanocomposites under Static and Flexural Fatigue Loadings [Volume 1, Issue 1, 2014, Pages 1-7]
  • Graphene Oxide Molecular Dynamic Investigation of Graphene Oxide Presence and Three Experimental Distribution Methods in Reinforced Epoxy-Based Nanocomposites [(Articles in Press)]
  • Graphite Metallurgical Assessment of Graphite Reinforced Al-Cu-Mg Nanocomposites Produced by the Shaker Mill Method [Volume 10, Issue 1, 2023, Pages 103-110]
  • Gravity Transverse Vibration for Non-uniform Timoshenko Nano-beams [Volume 2, Issue 1, 2015, Pages 1-16]
  • GRE composite pipe Damage Energy Evaluation in [55/-55]9 Composite Pipes using Acoustic Emission Method [Volume 2, Issue 2, 2015, Pages 127-134]
  • Green-Lindsay model Elasto-Thermodiffusive Response in a Two-Dimensional Transversely Isotropic Medium [Volume 6, Issue 2, 2019, Pages 95-104]
  • Grey relational analysis Multi-response Optimization while Drilling of Composite Laminate with Core Drill by Grey Entropy Fuzzy (GEF) Method [Volume 11, Issue 2, 2024, Pages 483-502]
  • Grey Relational grade Optimization of Wear Behaviour on Mg-TiO2 Nanocomposite Using Taguchi Grey Relational Analysis [Volume 10, Issue 1, 2023, Pages 151-156]
  • Grey Relation Analysis Optimization of AA6351-SiC-B4C Hybrid Composites in Wire EDM Using Grey Relation Technique [Volume 11, Issue 2, 2024, Pages 385-400]
  • Grid Stiffeners Minimal Mass and Maximal Buckling Load of Composite Hexagonal-Triangle Grid Structure using FSDT under External Hydrostatic Pressure [Volume 10, Issue 2, 2023, Pages 309-318]
  • Grid Stiffeners A Comprehensive Comparison between Multi-Objective Optimization Methods for Composite Hexagonal-Triangle Grid Structure using FSDT under External Hydrostatic Pressure [Volume 11, Issue 1, 2024, Pages 177-190]
  • Groundwater recharge Improving the Performance of Porous Concrete Composites Using Zeolite as a Coarse Grain [Volume 5, Issue 2, 2018, Pages 157-163]

H

  • Halloysite nanotube A Comparative Study on the Effect of HNT and Nano-Alumina Particles on the Mechanical Properties of Vacuum Bag Moulded Glass-Epoxy Nanocomposites [Volume 8, Issue 1, 2021, Pages 119-131]
  • Halpin- Tsai Model Free Vibration Analysis of Graphene Reinforced Laminated Composite Plates using Experimental Modal Testing [Volume 10, Issue 2, 2023, Pages 363-374]
  • HAM An Analytical Study on Effects of adding Nanoparticles to Water and Enhancement in Thermal Properties Based on Falkner-Skan Model [Volume 1, Issue 1, 2014, Pages 27-35]
  • Hamilton Principle Higher Order Approximations for Bending of FG Beams Using B-Spline Collocation Technique [Volume 11, Issue 1, 2024, Pages 159-176]
  • Hamilton' s principle Comparison of Deflection in Two-Directional Functionally Graded Tapered Beam [Volume 11, Issue 1, 2024, Pages 191-202]
  • Hand layup Mechanical Characterization of Glass-Basalt Hybrid Composites with Different Fiber Weight Fraction [Volume 11, Issue 2, 2024, Pages 295-308]
  • Hand lay up techniques Short Literature Survey on Fiber-Reinforced Hybrid Composites [Volume 11, Issue 2, 2024, Pages 425-452]
  • Hardness Investigation of Hardness, Morphology and Structural Analysis of NiCrBSi Composite Coating on Plain Carbon Steel [Volume 6, Issue 2, 2019, Pages 75-80]
  • Hardness A Comparative Study on the Microstructure and Mechanical Properties of Al-Si-Cu/1wt %NCP Composites after T6 Heat Treatment [Volume 7, Issue 1, 2020, Pages 129-136]
  • HDPE Investigation of Thermal Fatigue Behavior for HDPE Composites Reinforced by Nano Alumina [Volume 11, Issue 2, 2024, Pages 335-340]
  • HDQM Free Vibration and Buckling Analyses of Nanobeam Embedded in Pasternak Foundation [Volume 10, Issue 2, 2023, Pages 419-436]
  • Health monitoring Health Monitoring for Composite under Low-Cycle Cyclic Loading, Considering Effects of Acoustic Emission Sensor Type [Volume 6, Issue 1, 2019, Pages 19-26]
  • Heat treatment A Comparative Study on the Microstructure and Mechanical Properties of Al-Si-Cu/1wt %NCP Composites after T6 Heat Treatment [Volume 7, Issue 1, 2020, Pages 129-136]
  • Heaviside function Thermal Buckling and Thermal Induced free Vibration Analysis of Perforated Composite Plates: a Mathematical Model [Volume 7, Issue 1, 2020, Pages 15-23]
  • Helmet liner Crashworthiness Study of an Innovative Helmet Liner Composed of an Auxetic Lattice Structure and PU Foam [Volume 9, Issue 1, 2022, Pages 25-35]
  • High cycle fatigue Investigation of Thermal Fatigue Behavior for HDPE Composites Reinforced by Nano Alumina [Volume 11, Issue 2, 2024, Pages 335-340]
  • High-cycle fatigue Study of High-cycle Fatigue Properties in Bovine Tibia Bones based on Reliability and Scatter-band Predictions [Volume 7, Issue 2, 2020, Pages 255-261]
  • Higher Order Hamiltonian Sensitivity Analysis of Fiber-Reinforced Lamina Micro-Electro-Mechanical Switches with Nonlinear Vibration Using a Higher Order Hamiltonian Approach [Volume 5, Issue 1, 2018, Pages 25-39]
  • Higher-order plate theory On the Buckling the Behavior of a Multiphase Smart Plate based on a Higher-order Theory [Volume 4, Issue 1, 2017, Pages 47-58]
  • Higher-order shear deformation theory A New Three-Dimensional Refined Higher-Order Theory for Free Vibration Analysis of Composite Circular Cylindrical Shells [Volume 6, Issue 2, 2019, Pages 201-223]
  • Higher Order Shear Deformation Theory Flexural Behaviour of Nanocomposite Plate with CNT Distribution and Agglomeration Effect [Volume 10, Issue 1, 2023, Pages 123-136]
  • Higher Order Shear Deformation Theory On Numerical Investigation of Buckling in Two-Directional Porous Functionally Graded Beam Using Higher Order Shear Deformation Theory [Volume 10, Issue 2, 2023, Pages 393-406]
  • Higher-order theories On Moving Harmonic Load and Dynamic Response of Carbon Nanotube-Reinforced Composite Beams using Higher-Order Shear Deformation Theories [Volume 10, Issue 2, 2023, Pages 257-270]
  • High-order shear deformation theories Investigation of Free Vibration in Fluid-Loaded Cylindrical Shells with a Three-Layer Sandwich Wall and an Auxetic Central Layer [(Articles in Press)]
  • High temperature Experimental investigation of the strength of glass fiber-reinforced concrete exposed to high temperature [Volume 5, Issue 2, 2018, Pages 103-113]
  • Hollow cylinder Transient Thermal Stresses Analysis in a FPGM Cylinder [Volume 6, Issue 2, 2019, Pages 81-94]
  • Hollow cylinder Transient Solution of Heat and Moisture Transfer in a Functionally Graded Hollow Cylinder with Finite Length [Volume 9, Issue 1, 2022, Pages 49-57]
  • Hollow spherical body Thermo–Elastic Stresses and Deformation Analysis of FG Rotating Hollow Spherical Body [Volume 9, Issue 1, 2022, Pages 125-136]
  • Hoop strength Damage Energy Evaluation in [55/-55]9 Composite Pipes using Acoustic Emission Method [Volume 2, Issue 2, 2015, Pages 127-134]
  • Horizontal Defect Effects of Horizontal Deficiency Location on the Structural Behaviors of Steel SHS Short Columns Strengthened using CFRP [Volume 7, Issue 1, 2020, Pages 39-47]
  • Hot extrusion A Case Study for Fabrication of MWCNT-TiO2 Hybrid Reinforced Aluminium Matrix Nanocomposites [Volume 1, Issue 2, 2014, Pages 107-111]
  • HSDT Free Vibration Response of Agglomerated Carbon Nanotube-Reinforced Nanocomposite Plates [Volume 10, Issue 1, 2023, Pages 167-194]
  • HSDT Vibration and Buckling Analysis of Skew Sandwich Plate using Radial Basis Collocation Method [Volume 10, Issue 2, 2023, Pages 383-392]
  • Hybrid Investigation of Buckling Analysis of Epoxy/ Nanoclay/ Carbon Fiber Hybrid Laminated Nanocomposite: Using VARTM Technique for Preparation [Volume 3, Issue 1, 2016, Pages 63-71]
  • Hybrid Improving Mechanical Properties of Nanocomposite-based Epoxy by High-impact Polystyrene and Multiwalled Carbon Nanotubes: Optimizing by a Mixture Design Approach [Volume 4, Issue 1, 2017, Pages 33-45]
  • Hybrid Molecular Dynamics Simulation of Functional and Hybrid Epoxy Based Nanocomposites [Volume 7, Issue 2, 2020, Pages 233-243]
  • Hybrid composite Influence of Graphene Powder on the Physio-Mechanical Properties of Jute Reinforced Epoxy Composites for Automobile Applications [Volume 11, Issue 1, 2024, Pages 239-248]
  • Hybrid composite Mechanical Characterization of Glass-Basalt Hybrid Composites with Different Fiber Weight Fraction [Volume 11, Issue 2, 2024, Pages 295-308]
  • Hybrid composite Short Literature Survey on Fiber-Reinforced Hybrid Composites [Volume 11, Issue 2, 2024, Pages 425-452]
  • Hybrid composites Compression Analysis of Hollow Cylinder Basalt Continuous Filament Epoxy Composite Filled with Shape Memory Wire [Volume 4, Issue 3, 2017, Pages 225-232]
  • Hybrid composites Finite Element Analysis of Mechanical Properties of Basalt-Carbon Epoxy Hybrid Laminates [Volume 9, Issue 2, 2022, Pages 263-274]
  • Hybrid composites Multifunctional Properties of Metal Fibers Reinforced Polymer Composites – A Review [Volume 11, Issue 1, 2024, Pages 217-230]
  • Hybrid fibers Experimental Investigating to Increases the Fire Resistance of the Ultra-High-Performance Concrete by using Hybrid Fibers [Volume 9, Issue 2, 2022, Pages 377-386]
  • Hybridization Optimization of Hybrid Composite Laminate Based on the Frequency using Imperialist Competitive Algorithm [Volume 1, Issue 1, 2014, Pages 37-48]
  • Hybrid meta-heuristic optimization A Novel Hybrid Genetic Modified Colliding Bodies Optimization for Designing of Composite Laminates [Volume 8, Issue 1, 2021, Pages 203-212]
  • Hybrid Sandwich Composites Experimental Investigation and Simulation of Electro-Mechanical Behaviour of Hybrid Sandwich Composite Radomes for Aerospace Applications [Volume 11, Issue 2, 2024, Pages 401-412]
  • Hybrid thermoplastic nanocomposites Numerical Simulation of a Hybrid Nanocomposite Containing Ca-CO3 and Short Glass Fibers Subjected to Tensile Loading [Volume 4, Issue 2, 2017, Pages 117-125]
  • Hydrostatic test Experimental and Numerical Study on the Strength of Repaired Steel Pipes with Composite Patches under Internal Pressure [Volume 10, Issue 2, 2023, Pages 437-448]
  • Hydroxyapatite The Effect of Processing Conditions on the Mechanical Properties of Polypropylene/Mesoporous Silica-Hydroxyapatite Hybrid Nanocomposites [Volume 3, Issue 2, 2016, Pages 73-82]
  • Hygrothermal aging Environmental Effects on Mechanical Properties of Glass/Epoxy and Fiber Metal Laminates, Part I: Hygrothermal Aging [Volume 4, Issue 3, 2017, Pages 187-196]
  • Hygrothermal Environment Response of Agglomerated SWCNT Reinforced Nanocomposite Plate under Hygro-Thermal Loading [Volume 11, Issue 1, 2024, Pages 11-40]
  • Hygrothermal stress Modeling of Hygrothermal Damage of Composite Materials [Volume 3, Issue 2, 2016, Pages 137-144]
  • Hygro thermomagnetic effect Vibration in an Electrically Affected Hygro-magneto-thermo-flexo Electric Nanobeam Embedded in Winkler-Pasternak Foundation [Volume 8, Issue 2, 2021, Pages 401-414]
  • Hyperbolic heat conduction Thermoelastic Interaction in a Three-Dimensional Layered Sandwich Structure [Volume 5, Issue 2, 2018, Pages 187-198]
  • Hyperbolic shear deformation theory Bending, buckling and free vibration responses of hyperbolic shear deformable FGM beams [Volume 5, Issue 1, 2018, Pages 13-24]

I

  • Impact Analytical Modeling of Functionally Graded Carbon Nanotube-Reinforced Composite Plates under Low-Velocity Impact [Volume 11, Issue 2, 2024, Pages 281-294]
  • Impact energy Microstructure, Mechanical and Electrical Properties of Copper Matrix Composites Reinforced with Steel Nanoparticles [Volume 8, Issue 2, 2021, Pages 335-345]
  • Impact properties Environmental Effects on Mechanical Properties of Glass/Epoxy and Fiber Metal Laminates, Part I: Hygrothermal Aging [Volume 4, Issue 3, 2017, Pages 187-196]
  • Impact properties Environmental effects on mechanical properties of glass/epoxy and fiber metal laminates, Part II: Isothermal aging [Volume 4, Issue 3, 2017, Pages 197-205]
  • Impact Strength Mechanical and Tribological Behaviors of Chopped Carbon/Glass Fiber Reinforced Hybrid Epoxy Composites [Volume 9, Issue 2, 2022, Pages 349-358]
  • Impact-withstanding Efficiency Geometric Effects on Nanopore Creation in Graphene and on the Impact-withstanding Efficiency of Graphene Nanosheets [Volume 5, Issue 1, 2018, Pages 91-102]
  • Imperialist competitive algorithm Optimization of Hybrid Composite Laminate Based on the Frequency using Imperialist Competitive Algorithm [Volume 1, Issue 1, 2014, Pages 37-48]
  • Incineration Characterization of Thevetia Peruviana (Yellow Oleander) Shell Ash Powder as a Possible Filler in Polymer Composites [Volume 8, Issue 1, 2021, Pages 109-117]
  • Incremental loading Buckling Analysis of Nano Composite Plates Based on Combination of the Incremental Load Technique and Dynamic Relaxation Method [Volume 8, Issue 1, 2021, Pages 133-148]
  • Indentation An Analytical Study on the Indentation of a Layered Composite Beam and its Utilization in Low Velocity Impact Response [Volume 9, Issue 1, 2022, Pages 155-162]
  • Industrial waste Thrust Force and Delamination Analysis on Redmud-Filled Coconut Sheath Fiber Polyester Composite [(Articles in Press)]
  • Infinite orthotropic plate Optimization of infinite composite plates with quasi-triangular holes under in-plane loading [Volume 5, Issue 2, 2018, Pages 115-130]
  • Initial hydrostatic stress Assessment of Hydrostatic Stress and Thermo Piezoelectricity in a Laminated Multilayered Rotating Hollow Cylinder [Volume 8, Issue 1, 2021, Pages 77-86]
  • In situ formation In Situ Formation of SiC/CNT Ceramic Nanocomposite by Phenolic Pyrolysis [Volume 1, Issue 2, 2014, Pages 87-96]
  • Integral model Thermal Variations of Thermo-Mechanical Loading Effects on Creep Stress and Strain Distribution in Multi-layered Composite Cylinder [Volume 9, Issue 1, 2022, Pages 115-123]
  • Internal Pressure Design and Experimental/Numerical Analysis of Metal-Composite Vessel with Spherical Cap under Internal Pressure [Volume 10, Issue 2, 2023, Pages 247-256]
  • Internal resonances Nonlinear Torsional Vibration Analysis of Nanorods in the Presence of Surface Energy Effect: Multi-Mode Galerkin Method [Volume 9, Issue 2, 2022, Pages 229-242]
  • Internal resonances Nonlinear Torsional Vibration of Size-Dependent Functionally Graded Rods [Volume 11, Issue 1, 2024, Pages 41-58]
  • Intraocular lenses Synthesis and Characterization of Polymer/Nanosilicagel Nano-composites [Volume 4, Issue 1, 2017, Pages 1-8]
  • Inviscid fluid Sensitivity Analysis of Vibrating Laminated Composite Rec-tangular Plates in Interaction with Inviscid Fluid Using EFAST Method [Volume 7, Issue 2, 2020, Pages 219-231]
  • Iron filings Mechanical, Crystallographic, and Microstructural Analysis of Polymer Composites Developed from Iron Filings and Polystyrene Wastes [Volume 9, Issue 1, 2022, Pages 137-145]
  • Irregular tessellation Predicting Young’s Modulus of Aggregated Carbon Nanotube Reinforced Polymer [Volume 1, Issue 1, 2014, Pages 9-16]
  • Isogeometric Analysis Isogeometric Free and Forced Vibration Analyses of FG-CNTs Plates based on a Logarithmic Higher-Order Shear Deformation Theory [Volume 8, Issue 2, 2021, Pages 435-453]
  • Iso-thermal aging Environmental effects on mechanical properties of glass/epoxy and fiber metal laminates, Part II: Isothermal aging [Volume 4, Issue 3, 2017, Pages 197-205]

J

  • Jute Statistical Approach of Determining the Effect of Cenosphere on the Tribological Behaviour of Jute Reinforced Polymer Based Composite [Volume 10, Issue 1, 2023, Pages 211-220]
  • Jute Thermo-Mechanical Characterization of Jute-Bamboo Hybrid Thermoplastic Polymer Matrix Composites with Different Stacking Sequences for Automobile Applications [Volume 10, Issue 2, 2023, Pages 375-382]
  • Jute Experimental and Numerical Analysis of Woven Bamboo and Jute Fiber Reinforced in Epoxy Composites [Volume 11, Issue 1, 2024, Pages 103-118]
  • Jute Influence of Graphene Powder on the Physio-Mechanical Properties of Jute Reinforced Epoxy Composites for Automobile Applications [Volume 11, Issue 1, 2024, Pages 239-248]
  • Jute Development and Mechanical Characterization of Light Weight Fiber Metal Laminate using Jute, Kenaf and Aluminium [Volume 11, Issue 2, 2024, Pages 259-270]

K

  • Kenaf Development and Mechanical Characterization of Light Weight Fiber Metal Laminate using Jute, Kenaf and Aluminium [Volume 11, Issue 2, 2024, Pages 259-270]
  • Kota Stone Dust Polyester/Kota Stone Dust Composite: A Comprehensive Investigation of Mechanical and Sliding Wear Properties [Volume 11, Issue 2, 2024, Pages 375-384]

L

  • Lagrange method Vibration of MEE Composite Conical Shell Surrounded by Nonlinear Elastic Foundation Considering the Effect of Geometrical Nonlinearity [Volume 10, Issue 1, 2023, Pages 85-102]
  • Lagrange’ s equations Free Vibration Analysis of 2D Functionally Graded Porous Beams Using Novel Higher-Order Theory [Volume 10, Issue 1, 2023, Pages 69-84]
  • Laminate A Quasi-3D Polynomial Shear and Normal Deformation Theory for Laminated Composite, Sandwich, and Functionally Graded Beams [Volume 4, Issue 2, 2017, Pages 139-152]
  • Laminate Quick Review and Assessment of Thermal Stress Analyses for Exact and Assumed Temperature Distribution for Composite and Sandwich Laminates [Volume 10, Issue 2, 2023, Pages 343-362]
  • Laminate composite plate Sensitivity Analysis of Vibrating Laminated Composite Rec-tangular Plates in Interaction with Inviscid Fluid Using EFAST Method [Volume 7, Issue 2, 2020, Pages 219-231]
  • Laminated Higher-order Displacement Model for Cylindrical Bending of Laminated and Sandwich Plates Subjected to Environmental Loads [Volume 8, Issue 1, 2021, Pages 185-201]
  • Laminated beam Static Flexure of Soft Core Sandwich Beams using Trigonometric Shear Deformation Theory [Volume 2, Issue 1, 2015, Pages 45-53]
  • Laminated Composite Size-dependent Bending of Geometrically Nonlinear of Micro-Laminated Composite Beam based on Modified Couple Stress Theory [Volume 3, Issue 1, 2016, Pages 53-62]
  • Laminated Composite Study of Laminated Composite MEMS and NEMS Performance in Nano Metric Operations [Volume 4, Issue 1, 2017, Pages 19-31]
  • Laminated Composite Semi Analytical Transient Dynamic Analysis of Composite Adhesive Single-lap Joints [Volume 7, Issue 1, 2020, Pages 137-145]
  • Laminated Composite The Effect of Different Weighting Ratios, Length, and Thickness on Weighted Sum of the First Natural Frequency and Critical Buckling Load for a Laminated Composite Circular Cylindrical Shell [Volume 8, Issue 1, 2021, Pages 87-98]
  • Laminated Composite Low-velocity Impact Response of Viscoelastic Composite Laminates Considering Large Deflection and Higher-order Shear Deformation [Volume 8, Issue 2, 2021, Pages 425-434]
  • Laminated composite beam Active Vibration Control of Laminated Composite Beam Operating in Thermal Environment using PZT-5H Patches [Volume 9, Issue 2, 2022, Pages 387-398]
  • Laminated composite plate Geometrically Nonlinear Analysis of Laminated Composite Plates subjected to Uniform Distributed Load Using a New Hypothesis: the finite element method (FEM) Approach [Volume 7, Issue 2, 2020, Pages 271-285]
  • Laminated composites A Numerical and Analytical Solution for the Free Vibration of Laminated Composites Using Different Plate Theories [Volume 4, Issue 1, 2017, Pages 75-87]
  • Laminated composites Delamination Analysis in Composite Root of a Carbon-Layer Reinforced Wind Turbine Blade [Volume 6, Issue 1, 2019, Pages 9-18]
  • Laminated composites A Novel Approach for Lateral Buckling Assessment of Double Tapered Thin-Walled Laminated Composite I-Beams [Volume 9, Issue 1, 2022, Pages 11-23]
  • Laminated hypar shells Maximization of Fundamental Frequency of Composite Stiffened Hypar Shell with Cutout by Taguchi Method [Volume 10, Issue 1, 2023, Pages 43-54]
  • Laminated sheet Using the Taguchi Method for Experimental and Numerical Investigations on the Square-Cup Deep-Drawing Process for Aluminum/Steel Laminated Sheets [Volume 4, Issue 2, 2017, Pages 169-177]
  • Laminated shells A New Higher-Order Shear and Normal Deformation Theory for the Free Vibration Analysis of Laminated Shells [Volume 9, Issue 1, 2022, Pages 89-104]
  • Laminate Ply Forces The Graft of ANN-FEM Technique in Macro-mechanics of Multi-oriented Natural Fiber/Polyester Laminates [Volume 8, Issue 1, 2021, Pages 51-68]
  • Laminates Investigation of Buckling Analysis of Epoxy/ Nanoclay/ Carbon Fiber Hybrid Laminated Nanocomposite: Using VARTM Technique for Preparation [Volume 3, Issue 1, 2016, Pages 63-71]
  • Laminates Improving Mechanical Properties of Nanocomposite-based Epoxy by High-impact Polystyrene and Multiwalled Carbon Nanotubes: Optimizing by a Mixture Design Approach [Volume 4, Issue 1, 2017, Pages 33-45]
  • Laplace transform The Effects of the Moving Load and the Attached Mass-Spring-Damper System Interactions on the Dynamic Responses of the Composite Plates: An Analytical Approach [Volume 2, Issue 1, 2015, Pages 17-30]
  • Laplace transform An Analytical Approach to Thermoelastic Bending of Simply Supported Advanced Ribbed Composite Plates [Volume 5, Issue 2, 2018, Pages 173-185]
  • Laplace transform On Moving Harmonic Load and Dynamic Response of Carbon Nanotube-Reinforced Composite Beams using Higher-Order Shear Deformation Theories [Volume 10, Issue 2, 2023, Pages 257-270]
  • Large deflection Low-velocity Impact Response of Viscoelastic Composite Laminates Considering Large Deflection and Higher-order Shear Deformation [Volume 8, Issue 2, 2021, Pages 425-434]
  • Lateral buckling A Novel Approach for Lateral Buckling Assessment of Double Tapered Thin-Walled Laminated Composite I-Beams [Volume 9, Issue 1, 2022, Pages 11-23]
  • Lattice Boltzmann method 3D Numerical Simulation of Fibers Arrangement Effects On Thermal Conductivity of Polymer Matrix Composite [Volume 9, Issue 1, 2022, Pages 59-73]
  • Lattice structures Free Vibration of Lattice Cylindrical Composite Shell Reinforced with Carbon Nano-tubes [Volume 2, Issue 1, 2015, Pages 61-72]
  • Lattice structures The Effect of External Skin on Buckling Strength of Composite Lattice Cylinders Based on Numerical and Experimental Analysis [Volume 3, Issue 2, 2016, Pages 83-87]
  • Layered composite beam An Analytical Study on the Indentation of a Layered Composite Beam and its Utilization in Low Velocity Impact Response [Volume 9, Issue 1, 2022, Pages 155-162]
  • Light load automobile applications Thermo-Mechanical Characterization of Jute-Bamboo Hybrid Thermoplastic Polymer Matrix Composites with Different Stacking Sequences for Automobile Applications [Volume 10, Issue 2, 2023, Pages 375-382]
  • Lindstedt-Poincare method Vibration of MEE Composite Conical Shell Surrounded by Nonlinear Elastic Foundation Considering the Effect of Geometrical Nonlinearity [Volume 10, Issue 1, 2023, Pages 85-102]
  • Load factor XFEM for Fracture Analysis of Centrally Cracked Laminated Plates Subjected to Biaxial Loads [Volume 8, Issue 1, 2021, Pages 213-234]
  • Loading frequency Study of High-cycle Fatigue Properties in Bovine Tibia Bones based on Reliability and Scatter-band Predictions [Volume 7, Issue 2, 2020, Pages 255-261]
  • Longitudinal dynamic behavior Nonlocal Analysis of Longitudinal Dynamic Behavior of Nanobars with Surface Energy Effect [Volume 6, Issue 2, 2019, Pages 147-158]
  • Longitudinal strength Damage Energy Evaluation in [55/-55]9 Composite Pipes using Acoustic Emission Method [Volume 2, Issue 2, 2015, Pages 127-134]
  • Longitudinal Vibration Longitudinal Vibration of Nanobeams by Two-Phase Local/Nonlocal Elasticity, Rayleigh Theory, and Generalized Differential Quadrature Method [Volume 10, Issue 2, 2023, Pages 221-232]
  • Long-term creep strain Creep Strain and Stress Analysis in Laminated Composite Pres-sure Vessels [Volume 5, Issue 2, 2018, Pages 141-147]
  • Love wave Analysis of Electrically Shorted and Open Cases on Love Waves Propagating in Piezoelectric Layer embedded over a Fiber-reinforced Substrate [(Articles in Press)]
  • Low-cycle cyclic loading Health Monitoring for Composite under Low-Cycle Cyclic Loading, Considering Effects of Acoustic Emission Sensor Type [Volume 6, Issue 1, 2019, Pages 19-26]
  • Low impact Size Effect on the Damaged Areas of Glass/Epoxy Structures under Low Velocity Impact [Volume 1, Issue 2, 2014, Pages 81-85]
  • Low-velocity Analytical Modeling of Functionally Graded Carbon Nanotube-Reinforced Composite Plates under Low-Velocity Impact [Volume 11, Issue 2, 2024, Pages 281-294]
  • Low velocity impact Low-velocity Impact Response of Viscoelastic Composite Laminates Considering Large Deflection and Higher-order Shear Deformation [Volume 8, Issue 2, 2021, Pages 425-434]
  • Low velocity impact An Analytical Study on the Indentation of a Layered Composite Beam and its Utilization in Low Velocity Impact Response [Volume 9, Issue 1, 2022, Pages 155-162]
  • Low-velocity impact Crashworthiness Study of an Innovative Helmet Liner Composed of an Auxetic Lattice Structure and PU Foam [Volume 9, Issue 1, 2022, Pages 25-35]
  • Low-velocity impact Low-Velocity Impact Behavior of Foam Core Sandwich Panels with Different Face Sheet Layers: Numerical and Experimental Study [Volume 10, Issue 1, 2023, Pages 111-122]
  • LS-Dyna Experimental and Numerical Investigation on the Flexural Behavior of Composite-Reinforced Top-Hat Shape Beam [Volume 8, Issue 1, 2021, Pages 149-156]
  • LS-Dyna Crashworthiness Study of an Innovative Helmet Liner Composed of an Auxetic Lattice Structure and PU Foam [Volume 9, Issue 1, 2022, Pages 25-35]
  • Luffa sponge fibers Thermomechanical and Physical Properties of Plaster Concrete Reinforced with Natural Fibers [Volume 10, Issue 2, 2023, Pages 295-308]

M

  • Macro-mechanical Analysis The Graft of ANN-FEM Technique in Macro-mechanics of Multi-oriented Natural Fiber/Polyester Laminates [Volume 8, Issue 1, 2021, Pages 51-68]
  • MADM Feasibility Study On Application Of Various MADM Approaches For Selection Of Kenaf/Saw Dust Composite [(Articles in Press)]
  • Magnesium oxide Preparation, Identification, and Evaluation of the Thermal Properties of Novolac Resins Modified with TiO2, MgO, and V2O5 Oxides [Volume 11, Issue 1, 2024, Pages 1-9]
  • Magnetic field Nonlinear Magneto-Nonlocal Vibration Analysis of Coupled Piezoelectric Micro-Plates Reinforced with Agglomerated CNTs [Volume 7, Issue 1, 2020, Pages 109-119]
  • Magneto-electro-elastic coupling On the Buckling the Behavior of a Multiphase Smart Plate based on a Higher-order Theory [Volume 4, Issue 1, 2017, Pages 47-58]
  • Magneto-electro-thermo-mechanical loadings Nonlocal Buckling and Vibration Analysis of Triple-Walled ZnO Piezoelectric Timoshenko Nano-beam Subjected to Magneto-Electro-Thermo-Mechanical Loadings [Volume 2, Issue 2, 2015, Pages 113-126]
  • Magnetostrictive layers Active control of free and forced vibration of rotating laminated composite cylindrical shells embedded with magnetostrictive layers based on classical shell theory [Volume 7, Issue 2, 2020, Pages 355-369]
  • Magnetostrictive material On the Nonlinear Dynamics of an Energy Harvesting Device Based on Magnetostriction [Volume 8, Issue 1, 2021, Pages 33-40]
  • Marine Green Anticorrosion Coating with Low VOCs Emission using Moringa Oleifera Leaves Extract [Volume 9, Issue 1, 2022, Pages 163-171]
  • Mass Loss Open-Hole Size and Thermal Cycling Effects on Mass Loss and Surface Degradation of Polymer Matrix Composites [Volume 4, Issue 2, 2017, Pages 111-116]
  • Mass sensor Size-dependent Vibration Analysis of Non-uniform Mass Sensor Nanobeams [Volume 8, Issue 2, 2021, Pages 235-244]
  • Mathematical model Improving the Performance of the Sandwich Panel with the Corrugated Core Filled with Metal Foam: Mathematical and Numerical Methods [Volume 6, Issue 2, 2019, Pages 249-261]
  • Mathematical modeling Thermal Buckling and Thermal Induced free Vibration Analysis of Perforated Composite Plates: a Mathematical Model [Volume 7, Issue 1, 2020, Pages 15-23]
  • Matrix cracking Propagation of Matrix Cracking and Induced Delaminatin in Cross-Ply Composite Beams Subjected to Bending Loads [Volume 6, Issue 1, 2019, Pages 45-50]
  • MAX phase The Effect of Al Additive and Arc Melting Time on Synthesis of Ti3SiC2 MAX Phase using Ti/SiC/Al/Graphite [Volume 9, Issue 2, 2022, Pages 367-376]
  • Maxwell equation The Effect of Temperature Dependency on the Thermo-Electro-Elastic Analysis of Functionally Graded Piezoelectric Spherical Shell [Volume 6, Issue 1, 2019, Pages 1-8]
  • MCDM Experimental Investigation and Simulation of Electro-Mechanical Behaviour of Hybrid Sandwich Composite Radomes for Aerospace Applications [Volume 11, Issue 2, 2024, Pages 401-412]
  • Mechanical alloying The Structural and Mechanical Properties of Al-2.5%wt. B4C Met-al Matrix Nano-composite Fabricated by the Mechanical Alloying [Volume 2, Issue 1, 2015, Pages 39-44]
  • Mechanical alloying Effect of Particle Size on the Structural and Mechanical Properties of Al–AlN Nanocomposites Fabricated by Mechanical Alloying [Volume 2, Issue 2, 2015, Pages 73-78]
  • Mechanical and thermal loading Stress Analysis of FGM Rotating Disk Subjected to Mechanical and Thermal Loads In Aircraft Gas Turbine Engine [Volume 7, Issue 1, 2020, Pages 1-13]
  • Mechanical Behavior Mechanical Characterization and Wear Behavior of Nano TiO2 Particulates Reinforced Al7075 Alloy Composites [Volume 7, Issue 1, 2020, Pages 71-78]
  • Mechanical characterization Development and Mechanical Characterization of Light Weight Fiber Metal Laminate using Jute, Kenaf and Aluminium [Volume 11, Issue 2, 2024, Pages 259-270]
  • Mechanical characterization Feasibility Study On Application Of Various MADM Approaches For Selection Of Kenaf/Saw Dust Composite [(Articles in Press)]
  • Mechanical Mixing Molecular Dynamic Investigation of Graphene Oxide Presence and Three Experimental Distribution Methods in Reinforced Epoxy-Based Nanocomposites [(Articles in Press)]
  • Mechanical properties Mechanical Properties of Graphene/Epoxy Nanocomposites under Static and Flexural Fatigue Loadings [Volume 1, Issue 1, 2014, Pages 1-7]
  • Mechanical properties Atomic Simulation of Temperature Effect on the Mechanical Properties of Thin Films [Volume 2, Issue 1, 2015, Pages 31-38]
  • Mechanical properties The Structural and Mechanical Properties of Al-2.5%wt. B4C Met-al Matrix Nano-composite Fabricated by the Mechanical Alloying [Volume 2, Issue 1, 2015, Pages 39-44]
  • Mechanical properties Effect of Particle Size on the Structural and Mechanical Properties of Al–AlN Nanocomposites Fabricated by Mechanical Alloying [Volume 2, Issue 2, 2015, Pages 73-78]
  • Mechanical properties On the Study of Mechanical Properties of Aluminum/Nano-Alumina Composites Produced via Powder Injection Molding [Volume 3, Issue 1, 2016, Pages 45-51]
  • Mechanical properties Investigation of Buckling Analysis of Epoxy/ Nanoclay/ Carbon Fiber Hybrid Laminated Nanocomposite: Using VARTM Technique for Preparation [Volume 3, Issue 1, 2016, Pages 63-71]
  • Mechanical properties The Effect of Processing Conditions on the Mechanical Properties of Polypropylene/Mesoporous Silica-Hydroxyapatite Hybrid Nanocomposites [Volume 3, Issue 2, 2016, Pages 73-82]
  • Mechanical properties Mechanical Properties of CNT-Reinforced Polymer Nano-composites: A Molecular Dynamics Study [Volume 3, Issue 2, 2016, Pages 113-121]
  • Mechanical properties Improving Mechanical Properties of Nanocomposite-based Epoxy by High-impact Polystyrene and Multiwalled Carbon Nanotubes: Optimizing by a Mixture Design Approach [Volume 4, Issue 1, 2017, Pages 33-45]
  • Mechanical properties Effects of reinforcement distribution on the mechanical properties of Al–Fe3O4 nanocomposites fabricated via accumulative roll bonding [Volume 5, Issue 2, 2018, Pages 131-139]
  • Mechanical properties Influence of Different Foaming Conditions on the Mechanical, Physical, and Structural Properties of Polypropylene Foam [Volume 6, Issue 2, 2019, Pages 225-237]
  • Mechanical properties Molecular Dynamics Simulation of Functional and Hybrid Epoxy Based Nanocomposites [Volume 7, Issue 2, 2020, Pages 233-243]
  • Mechanical properties A Comparative Study on the Effect of HNT and Nano-Alumina Particles on the Mechanical Properties of Vacuum Bag Moulded Glass-Epoxy Nanocomposites [Volume 8, Issue 1, 2021, Pages 119-131]
  • Mechanical properties Artificial Intelligence Method for Predicting Mechanical Properties of Sand/Glass Reinforced Polymer: a New Model [Volume 8, Issue 2, 2021, Pages 245-268]
  • Mechanical properties Study of Bond Strength between Polymer-Modified Mortars/Concrete and Their Mechanical Properties using “Friction-Transfer” and “Pull-off” Methods [Volume 8, Issue 1, 2021, Pages 171-184]
  • Mechanical properties An Experimental and Numerical Approach of Polymer Composites Based on Jute-Bamboo Natural Fiber [Volume 9, Issue 1, 2022, Pages 105-113]
  • Mechanical properties Physical and Mechanical Properties of Biodegradable Film from Taro Starch (Xanthosoma Sagittifolium) and Duck Bone Gelatin [Volume 9, Issue 2, 2022, Pages 213-220]
  • Mechanical properties Material Mechanical Properties Prediction of Layer with Multidirectional Fiber Ply Reinforced Polymer Matrix Composites [Volume 9, Issue 2, 2022, Pages 221-227]
  • Mechanical properties The Effect of Nano-B4C Additive on Microstructure and Mechanical Properties of Pressureless Sintering SiC Bodies [Volume 10, Issue 1, 2023, Pages 29-42]
  • Mechanical properties Effect of the Nature of Oxide Nanofillers on Changes in the Mechanical Properties of Epoxy Coatings under Thermal Cycling [Volume 10, Issue 1, 2023, Pages 195-204]
  • Mechanical properties Microstructure & Mechanical Properties Evaluation of Al6082 /AlSi10Mg Composite for Light Weight Structural Applications [Volume 11, Issue 2, 2024, Pages 309-320]
  • Mechanical properties Polyester/Kota Stone Dust Composite: A Comprehensive Investigation of Mechanical and Sliding Wear Properties [Volume 11, Issue 2, 2024, Pages 375-384]
  • Mechanical properties Short Literature Survey on Fiber-Reinforced Hybrid Composites [Volume 11, Issue 2, 2024, Pages 425-452]
  • Mechanical properties Analyzing and Improving Flexural and Impact Strength of Composites Enhanced with Nanoparticles and Natural Fibers [Volume 11, Issue 2, 2024, Pages 467-482]
  • Mechanical Stress Stress Analysis of the Rotating Carbon-Carbon Composite Disk of an Axial Compressor [Volume 10, Issue 2, 2023, Pages 271-282]
  • Mechanical Test Influence of Filler Content on the Mechanical, Thermal, Moisture Absorption, and Biodegradability Properties of Bionanocomposite with Cellulosic Fibers Derived from Delonix Regia Fruits [Volume 11, Issue 1, 2024, Pages 73-86]
  • Mechanical testing Evaluation of hardness and wear resistance of nano-sized titanium-carbide-reinforced commercially cast aluminum alloy matrices [Volume 5, Issue 1, 2018, Pages 75-81]
  • Mechanical testing Investigation of Tensile Characteristics of an Epoxy Matrix Com-posite with Uni-Directional and Hybrid Tissue Natural Hemp Fibers [Volume 6, Issue 2, 2019, Pages 181-190]
  • Mechanical Vibrations Analysis of SH-waves Propagating in Multiferroic Structure with Interfacial Imperfection [Volume 9, Issue 1, 2022, Pages 1-10]
  • Mechano-chemical treatment Influence of Filler Content on the Mechanical, Thermal, Moisture Absorption, and Biodegradability Properties of Bionanocomposite with Cellulosic Fibers Derived from Delonix Regia Fruits [Volume 11, Issue 1, 2024, Pages 73-86]
  • MEE composite conical shell Vibration of MEE Composite Conical Shell Surrounded by Nonlinear Elastic Foundation Considering the Effect of Geometrical Nonlinearity [Volume 10, Issue 1, 2023, Pages 85-102]
  • Memory-Dependent Derivative Generalized Thermoelastic Interactions Using an Eigenvalue Technique in a Transversely Isotropic Unbounded Medium with Memory Having a Line Heat Source [Volume 11, Issue 2, 2024, Pages 413-424]
  • MEMS and NEMS Study of Laminated Composite MEMS and NEMS Performance in Nano Metric Operations [Volume 4, Issue 1, 2017, Pages 19-31]
  • MEMS Switches Sensitivity Analysis of Fiber-Reinforced Lamina Micro-Electro-Mechanical Switches with Nonlinear Vibration Using a Higher Order Hamiltonian Approach [Volume 5, Issue 1, 2018, Pages 25-39]
  • Meshfree Assessment of RBFs Based Meshfree Method for the Vibration Response of FGM Rectangular Plate Using HSDT Model [Volume 10, Issue 1, 2023, Pages 137-150]
  • Meshfree Vibration and Buckling Analysis of Skew Sandwich Plate using Radial Basis Collocation Method [Volume 10, Issue 2, 2023, Pages 383-392]
  • Meshfree Initial Buckling Behavior of Elastically Supported Rectangular FGM Plate based on Higher Order Shear Deformation Theory via Spline RBF Method [Volume 11, Issue 1, 2024, Pages 59-72]
  • Mesh-free Static and Free Vibration Analyses of Functionally Graded Nano-composite Plates Reinforced by Wavy Carbon Nanotubes Resting on a Pasternak Elastic Foundation [Volume 3, Issue 2, 2016, Pages 123-135]
  • Mesh-free Mesh-free Dynamic Analyses of FGM Sandwich Plates Resting on A Pasternak Elastic Foundation [Volume 4, Issue 2, 2017, Pages 153-168]
  • Mesh-free method Frequency Analysis of Functionally Graded Carbon Nanotube-reinforced Cylindrical Panels by Mesh-free Galerkin Method [Volume 8, Issue 2, 2021, Pages 415-424]
  • Mesoporous silica The Effect of Processing Conditions on the Mechanical Properties of Polypropylene/Mesoporous Silica-Hydroxyapatite Hybrid Nanocomposites [Volume 3, Issue 2, 2016, Pages 73-82]
  • Metal Fibers Multifunctional Properties of Metal Fibers Reinforced Polymer Composites – A Review [Volume 11, Issue 1, 2024, Pages 217-230]
  • Metal Foam Improving the Performance of the Sandwich Panel with the Corrugated Core Filled with Metal Foam: Mathematical and Numerical Methods [Volume 6, Issue 2, 2019, Pages 249-261]
  • Metal matrix composite Effects of reinforcement distribution on the mechanical properties of Al–Fe3O4 nanocomposites fabricated via accumulative roll bonding [Volume 5, Issue 2, 2018, Pages 131-139]
  • Metal matrix composite Microstructure, Mechanical and Electrical Properties of Copper Matrix Composites Reinforced with Steel Nanoparticles [Volume 8, Issue 2, 2021, Pages 335-345]
  • Metal matrix composites Experimental Study on Surface Roughness and Cutting Force in Turning of Al7032 Reinforced with SiC Using Taguchi Design [Volume 8, Issue 1, 2021, Pages 69-76]
  • Metal–matrix Composites Evaluation of hardness and wear resistance of nano-sized titanium-carbide-reinforced commercially cast aluminum alloy matrices [Volume 5, Issue 1, 2018, Pages 75-81]
  • Metamaterials Buckling Analysis of Sandwich Structures with Metamaterials Core Integrated by Graphene Nanoplatelets Reinforced Polymer Composite [Volume 10, Issue 1, 2023, Pages 1-10]
  • MgF2/Cu coating Synthesis and Characterization of MgF2/Cu Coating on Aluminum Produced by Sputtering Technique [Volume 9, Issue 2, 2022, Pages 297-302]
  • MHSDT Nonlinear Dynamic Analysis of Annular FG Porous Sandwich Plates Reinforced by Graphene Platelets [Volume 11, Issue 1, 2024, Pages 131-148]
  • Microbeam Size-Dependent Nonlinear Dynamics of a Non-Uniform Piezoelectric Microbeam Based on the Strain Gradient Theory [Volume 7, Issue 2, 2020, Pages 321-331]
  • Micro-beams Buckling and Nonlinear Vibration of Functionally Graded Porous Micro-beam Resting on Elastic Foundation [Volume 9, Issue 1, 2022, Pages 75-88]
  • Microcellular foam Influence of Different Foaming Conditions on the Mechanical, Physical, and Structural Properties of Polypropylene Foam [Volume 6, Issue 2, 2019, Pages 225-237]
  • Micrographs A Comparative Study on the Effect of HNT and Nano-Alumina Particles on the Mechanical Properties of Vacuum Bag Moulded Glass-Epoxy Nanocomposites [Volume 8, Issue 1, 2021, Pages 119-131]
  • Micromechanical model Effects of Magnetic Field in Creep Behavior of Three-Phase Laminated Composite Cylindrical Shells [Volume 6, Issue 1, 2019, Pages 51-56]
  • Micromechanics Propagation of Matrix Cracking and Induced Delaminatin in Cross-Ply Composite Beams Subjected to Bending Loads [Volume 6, Issue 1, 2019, Pages 45-50]
  • Microstructure Effects of reinforcement distribution on the mechanical properties of Al–Fe3O4 nanocomposites fabricated via accumulative roll bonding [Volume 5, Issue 2, 2018, Pages 131-139]
  • Microstructure A Comparative Study on the Microstructure and Mechanical Properties of Al-Si-Cu/1wt %NCP Composites after T6 Heat Treatment [Volume 7, Issue 1, 2020, Pages 129-136]
  • Microstructure analysis Microstructure & Mechanical Properties Evaluation of Al6082 /AlSi10Mg Composite for Light Weight Structural Applications [Volume 11, Issue 2, 2024, Pages 309-320]
  • Mixed mode Stress Intensity Factor XFEM for Fracture Analysis of Centrally Cracked Laminated Plates Subjected to Biaxial Loads [Volume 8, Issue 1, 2021, Pages 213-234]
  • Mixture Design Improving Mechanical Properties of Nanocomposite-based Epoxy by High-impact Polystyrene and Multiwalled Carbon Nanotubes: Optimizing by a Mixture Design Approach [Volume 4, Issue 1, 2017, Pages 33-45]
  • Modal Analysis Nonlinear Vibration of Rotating Laminated Composite Cross-ply Cylindrical Shell on Nonlinear Rotating Elastic Foundation [Volume 9, Issue 2, 2022, Pages 317-334]
  • Modal analysis method Elasto-dynamic Response Analysis of a Curved Composite Sandwich Beam Subjected to the Loading of a Moving Mass [Volume 7, Issue 2, 2020, Pages 347-354]
  • Modal characteristics Experimental Modal Analysis of Viscoelastic Sandwich Structures [(Articles in Press)]
  • Modal data Damage Detection in Concrete Filled Tube Columns Based on Experimental Modal Data and Wavelet Technique [Volume 7, Issue 2, 2020, Pages 245-254]
  • Mode of failure Size Effect on the Damaged Areas of Glass/Epoxy Structures under Low Velocity Impact [Volume 1, Issue 2, 2014, Pages 81-85]
  • Mode shape Dynamic Characteristics of Joined Steel and Carbon Fiber-Reinforced Plastic Tubes: Experimental and Numerical Investigation [Volume 4, Issue 2, 2017, Pages 88-97]
  • Modifided couple stress theory Size-dependent Bending of Geometrically Nonlinear of Micro-Laminated Composite Beam based on Modified Couple Stress Theory [Volume 3, Issue 1, 2016, Pages 53-62]
  • Modified Halpin-Tsai equations Free Vibration of Lattice Cylindrical Composite Shell Reinforced with Carbon Nano-tubes [Volume 2, Issue 1, 2015, Pages 61-72]
  • Modified shear deformation theory Size-dependent Electro-Mechanical Vibration Analysis of FGPM Composite Plates using Modified Shear Deformation Theories [Volume 8, Issue 1, 2021, Pages 157-169]
  • Moisture Influence of Hygrothermal Environment and FG Material on Natural Frequency and Parametric Instability of Plates [Volume 7, Issue 1, 2020, Pages 89-101]
  • Molecular Dynamics Mechanical Properties of CNT-Reinforced Polymer Nano-composites: A Molecular Dynamics Study [Volume 3, Issue 2, 2016, Pages 113-121]
  • Molecular Dynamics Geometric Effects on Nanopore Creation in Graphene and on the Impact-withstanding Efficiency of Graphene Nanosheets [Volume 5, Issue 1, 2018, Pages 91-102]
  • Molecular Dynamics Molecular Dynamics Simulation of Functional and Hybrid Epoxy Based Nanocomposites [Volume 7, Issue 2, 2020, Pages 233-243]
  • Molecular Dynamics Molecular Dynamic Investigation of Graphene Oxide Presence and Three Experimental Distribution Methods in Reinforced Epoxy-Based Nanocomposites [(Articles in Press)]
  • Molecular dynamic simulation Atomic Simulation of Temperature Effect on the Mechanical Properties of Thin Films [Volume 2, Issue 1, 2015, Pages 31-38]
  • Molecular dynamic simulation Interfacial Characteristics of Graphene/Polymer Nanocomposites by Molecular Dynamics Simulation and Evaluating Effects of that on Mechanical Properties of Nanocomposites by FEM [Volume 11, Issue 2, 2024, Pages 321-334]
  • Mono- Leaf Spring Short Literature Survey on Fiber-Reinforced Hybrid Composites [Volume 11, Issue 2, 2024, Pages 425-452]
  • MOPSO A Comprehensive Comparison between Multi-Objective Optimization Methods for Composite Hexagonal-Triangle Grid Structure using FSDT under External Hydrostatic Pressure [Volume 11, Issue 1, 2024, Pages 177-190]
  • Mori-Tanaka approach Three-dimensional elasticity solution for vibrational analysis of thick continuously graded sandwich plates with different boundary conditions using a two-parameter micromechanical model for agglomeration [Volume 5, Issue 1, 2018, Pages 49-66]
  • Mori–Tanaka approach Free Vibration and Buckling Analyses of Functionally Graded Nanocomposite Plates Reinforced by Carbon Nanotube [Volume 4, Issue 1, 2017, Pages 59-73]
  • Morphology Investigation of Hardness, Morphology and Structural Analysis of NiCrBSi Composite Coating on Plain Carbon Steel [Volume 6, Issue 2, 2019, Pages 75-80]
  • Moving harmonic load On Moving Harmonic Load and Dynamic Response of Carbon Nanotube-Reinforced Composite Beams using Higher-Order Shear Deformation Theories [Volume 10, Issue 2, 2023, Pages 257-270]
  • Moving mass Elasto-dynamic Response Analysis of a Curved Composite Sandwich Beam Subjected to the Loading of a Moving Mass [Volume 7, Issue 2, 2020, Pages 347-354]
  • MQ-RBF A Meshfree Approach for Bending Analysis of Porous Rectangular FGM Plate Resting on Elastic Foundation [Volume 9, Issue 2, 2022, Pages 303-316]
  • MRR Effect of Chilling & B4C content on Machining Efficiency and Surface Quality in Wire-Cut Machining of Aluminum Matrix Chilled Composites [Volume 11, Issue 2, 2024, Pages 341-350]
  • MSC/NASTRAN Experimental and Finite Element Studies on Free Vibration of Areca Leaf Sheath Reinforced Polymer Composites [Volume 8, Issue 2, 2021, Pages 367-388]
  • MSWI ash Engineering Behavior of Municipal Solid Waste Incinerated Ash with Compressible Soil: An Approach Towards the Waste Utilization & Stabilization of Compressible Soil [(Articles in Press)]
  • Multidirectional Fiber Material Mechanical Properties Prediction of Layer with Multidirectional Fiber Ply Reinforced Polymer Matrix Composites [Volume 9, Issue 2, 2022, Pages 221-227]
  • Multilayer composites Thermal Variations of Thermo-Mechanical Loading Effects on Creep Stress and Strain Distribution in Multi-layered Composite Cylinder [Volume 9, Issue 1, 2022, Pages 115-123]
  • Multi-layered graphene sheets Free Vibration Analysis of Size-Dependent Multi-Layered Graphene Sheets Based on Strain Gradient Elasticity Theory [Volume 9, Issue 2, 2022, Pages 275-285]
  • Multi-mode Galerkin method Nonlinear Torsional Vibration Analysis of Nanorods in the Presence of Surface Energy Effect: Multi-Mode Galerkin Method [Volume 9, Issue 2, 2022, Pages 229-242]
  • Multiple scale method Nonlinear Torsional Vibration of Size-Dependent Functionally Graded Rods [Volume 11, Issue 1, 2024, Pages 41-58]
  • Multiple-scale method Nonlinear Torsional Vibration Analysis of Nanorods in the Presence of Surface Energy Effect: Multi-Mode Galerkin Method [Volume 9, Issue 2, 2022, Pages 229-242]
  • Multi-scale modeling Predicting Young’s Modulus of Aggregated Carbon Nanotube Reinforced Polymer [Volume 1, Issue 1, 2014, Pages 9-16]
  • Multi-Walled Carbon Nanotube Effects of Nanotube/Matrix Interface on Multi-Walled Carbon Nanotube Reinforced Polymer Mechanical Properties [Volume 4, Issue 3, 2017, Pages 211-223]

N

  • Nano-Alumina A Comparative Study on the Effect of HNT and Nano-Alumina Particles on the Mechanical Properties of Vacuum Bag Moulded Glass-Epoxy Nanocomposites [Volume 8, Issue 1, 2021, Pages 119-131]
  • Nano alumina oxide Investigation of Thermal Fatigue Behavior for HDPE Composites Reinforced by Nano Alumina [Volume 11, Issue 2, 2024, Pages 335-340]
  • Nanobar Nonlocal Analysis of Longitudinal Dynamic Behavior of Nanobars with Surface Energy Effect [Volume 6, Issue 2, 2019, Pages 147-158]
  • Nanobeam Size-dependent Vibration Analysis of Non-uniform Mass Sensor Nanobeams [Volume 8, Issue 2, 2021, Pages 235-244]
  • Nanobeam Longitudinal Vibration of Nanobeams by Two-Phase Local/Nonlocal Elasticity, Rayleigh Theory, and Generalized Differential Quadrature Method [Volume 10, Issue 2, 2023, Pages 221-232]
  • Nanobeam Free Vibration and Buckling Analyses of Nanobeam Embedded in Pasternak Foundation [Volume 10, Issue 2, 2023, Pages 419-436]
  • Nano boron carbide The Effect of Nano-B4C Additive on Microstructure and Mechanical Properties of Pressureless Sintering SiC Bodies [Volume 10, Issue 1, 2023, Pages 29-42]
  • Nanoclay Flexural Behavior of Fiber–Metal Laminates Reinforced with Surface-Functionalized Nanoclay [Volume 5, Issue 2, 2018, Pages 149-156]
  • Nanocomposite In Situ Formation of SiC/CNT Ceramic Nanocomposite by Phenolic Pyrolysis [Volume 1, Issue 2, 2014, Pages 87-96]
  • Nanocomposite Buckling Analysis of Spherical Composite Panels Reinforced by Carbon Nanotube [Volume 2, Issue 2, 2015, Pages 135-144]
  • Nanocomposite The Effect of Processing Conditions on the Mechanical Properties of Polypropylene/Mesoporous Silica-Hydroxyapatite Hybrid Nanocomposites [Volume 3, Issue 2, 2016, Pages 73-82]
  • Nanocomposite Distribution of Residual Stresses in Polymer Reinforced Carbon Nanotubes and Laminated Carbon Fibers [Volume 4, Issue 1, 2017, Pages 9-18]
  • Nanocomposite Synthesis and Characterization of Polymer/Nanosilicagel Nano-composites [Volume 4, Issue 1, 2017, Pages 1-8]
  • Nanocomposite Investigation into The Behavior of Nano-composite Tubes at Ballistic Impact [Volume 4, Issue 3, 2017, Pages 207-210]
  • Nanocomposite Effects of Nanotube/Matrix Interface on Multi-Walled Carbon Nanotube Reinforced Polymer Mechanical Properties [Volume 4, Issue 3, 2017, Pages 211-223]
  • Nanocomposite Sintered Steel Composites Reinforced with Ceramic Nanoparticles: Fabrication, Characteristics and Wear Behavior [Volume 6, Issue 2, 2019, Pages 191-200]
  • Nanocomposite A Comparative Study on the Microstructure and Mechanical Properties of Al-Si-Cu/1wt %NCP Composites after T6 Heat Treatment [Volume 7, Issue 1, 2020, Pages 129-136]
  • Nanocomposite Molecular Dynamics Simulation of Functional and Hybrid Epoxy Based Nanocomposites [Volume 7, Issue 2, 2020, Pages 233-243]
  • Nanocomposite Synthesis and Characterization Al2O3/Novolac/Fiberglass Nanocomposite: Modification of Thermal Stability and Thermal Insulation Properties [Volume 10, Issue 1, 2023, Pages 21-28]
  • Nanocomposite The Effect of Nano-B4C Additive on Microstructure and Mechanical Properties of Pressureless Sintering SiC Bodies [Volume 10, Issue 1, 2023, Pages 29-42]
  • Nanocomposite Production and Investigation of Natural Zeolite-TiO2/CuO Nanoparticles Composite [Volume 10, Issue 1, 2023, Pages 205-210]
  • Nanocomposite Preparation, Identification, and Evaluation of the Thermal Properties of Novolac Resins Modified with TiO2, MgO, and V2O5 Oxides [Volume 11, Issue 1, 2024, Pages 1-9]
  • Nanocomposite Molecular Dynamic Investigation of Graphene Oxide Presence and Three Experimental Distribution Methods in Reinforced Epoxy-Based Nanocomposites [(Articles in Press)]
  • Nanocomposite Plate Flexural Behaviour of Nanocomposite Plate with CNT Distribution and Agglomeration Effect [Volume 10, Issue 1, 2023, Pages 123-136]
  • Nanocomposite plates Static and Free Vibration Analyses of Functionally Graded Nano-composite Plates Reinforced by Wavy Carbon Nanotubes Resting on a Pasternak Elastic Foundation [Volume 3, Issue 2, 2016, Pages 123-135]
  • Nanocomposites Mechanical Properties of Graphene/Epoxy Nanocomposites under Static and Flexural Fatigue Loadings [Volume 1, Issue 1, 2014, Pages 1-7]
  • Nanocomposites Experimental Study on Amine-Functionalized Carbon Nanotubes’ Effect on the Thermomechanical Properties of CNT/Epoxy Nano-composites [Volume 5, Issue 1, 2018, Pages 41-48]
  • Nanocomposites Cured Poly(ethylene-g-maleic anhydride)/Graphene Nanocomposite: Properties and Characterization [Volume 5, Issue 1, 2018, Pages 1-12]
  • Nanocomposites Buckling Analysis of Sandwich Structures with Metamaterials Core Integrated by Graphene Nanoplatelets Reinforced Polymer Composite [Volume 10, Issue 1, 2023, Pages 1-10]
  • Nano-composites Graphene-based Polymer Nano-composites - A Review [Volume 7, Issue 2, 2020, Pages 333-346]
  • Nanofluids An Analytical Study on Effects of adding Nanoparticles to Water and Enhancement in Thermal Properties Based on Falkner-Skan Model [Volume 1, Issue 1, 2014, Pages 27-35]
  • Nano-indentation test Atomic Simulation of Temperature Effect on the Mechanical Properties of Thin Films [Volume 2, Issue 1, 2015, Pages 31-38]
  • Nano-manipulation Study of Laminated Composite MEMS and NEMS Performance in Nano Metric Operations [Volume 4, Issue 1, 2017, Pages 19-31]
  • Nanopore Geometric Effects on Nanopore Creation in Graphene and on the Impact-withstanding Efficiency of Graphene Nanosheets [Volume 5, Issue 1, 2018, Pages 91-102]
  • Nano-reinforcement On the Study of Mechanical Properties of Aluminum/Nano-Alumina Composites Produced via Powder Injection Molding [Volume 3, Issue 1, 2016, Pages 45-51]
  • Nano-reinforcement Sintered Steel Composites Reinforced with Ceramic Nanoparticles: Fabrication, Characteristics and Wear Behavior [Volume 6, Issue 2, 2019, Pages 191-200]
  • Nanorod A Semi-Analytical Nonlinear Approach for Size-Dependent Analysis of Longitudinal Vibration in Terms of Axially Functionally Graded Nanorods [Volume 11, Issue 2, 2024, Pages 453-466]
  • Nano-silica Study on Compression and Flexural Behavior of ABS-SiO2 Poly-mer Matrix Composite Fabricated by Hot Extrusion [Volume 6, Issue 2, 2019, Pages 239-247]
  • Nano-silica Experimental Study on Dynamic Behavior of Acrylonitrile-Butadiene-Styrene (ABS) Based Nano Composite Reinforced by Nano Silica Addition [Volume 7, Issue 2, 2020, Pages 313-320]
  • Nano TiO2 Mechanical Characterization and Wear Behavior of Nano TiO2 Particulates Reinforced Al7075 Alloy Composites [Volume 7, Issue 1, 2020, Pages 71-78]
  • Natural composites Experimental and Finite Element Studies on Free Vibration of Areca Leaf Sheath Reinforced Polymer Composites [Volume 8, Issue 2, 2021, Pages 367-388]
  • Natural Fiber An Experimental and Numerical Approach of Polymer Composites Based on Jute-Bamboo Natural Fiber [Volume 9, Issue 1, 2022, Pages 105-113]
  • Natural hemp fibers Investigation of Tensile Characteristics of an Epoxy Matrix Com-posite with Uni-Directional and Hybrid Tissue Natural Hemp Fibers [Volume 6, Issue 2, 2019, Pages 181-190]
  • Navier method Free Vibration Analysis of Size-Dependent Multi-Layered Graphene Sheets Based on Strain Gradient Elasticity Theory [Volume 9, Issue 2, 2022, Pages 275-285]
  • Near-surface mount method (NSM) Strengthening of One-Way Slabs Using Composite Laminates of HPFRCC Including Synthetic Fibers PPS [Volume 9, Issue 1, 2022, Pages 185-197]
  • Netting analysis Failure Probability Analysis of Composite Pressure Tanks Using Subset Simulation [Volume 11, Issue 2, 2024, Pages 363-374]
  • Neural Networks Artificial Intelligence Method for Predicting Mechanical Properties of Sand/Glass Reinforced Polymer: a New Model [Volume 8, Issue 2, 2021, Pages 245-268]
  • New kinematic function Geometrically Nonlinear Analysis of Laminated Composite Plates subjected to Uniform Distributed Load Using a New Hypothesis: the finite element method (FEM) Approach [Volume 7, Issue 2, 2020, Pages 271-285]
  • Newmark’ s integration method Nonlinear Dynamic Analysis of Annular FG Porous Sandwich Plates Reinforced by Graphene Platelets [Volume 11, Issue 1, 2024, Pages 131-148]
  • NiCrBSi coating Investigation of Hardness, Morphology and Structural Analysis of NiCrBSi Composite Coating on Plain Carbon Steel [Volume 6, Issue 2, 2019, Pages 75-80]
  • Non-axisymmetric Numerical Investigation on Free Vibration Response of Bi-Directional Porous Functionally Graded Circular/Annular Plates [Volume 9, Issue 2, 2022, Pages 243-262]
  • Nonlinear dynamic Adaptive Tunable Vibration Absorber using Shape Memory Alloy [Volume 2, Issue 1, 2015, Pages 55-60]
  • Nonlinear Dynamics On the Nonlinear Dynamics of an Energy Harvesting Device Based on Magnetostriction [Volume 8, Issue 1, 2021, Pages 33-40]
  • Nonlinear elastic foundation Vibration of MEE Composite Conical Shell Surrounded by Nonlinear Elastic Foundation Considering the Effect of Geometrical Nonlinearity [Volume 10, Issue 1, 2023, Pages 85-102]
  • Nonlinear geometry Size-Dependent Nonlinear Dynamics of a Non-Uniform Piezoelectric Microbeam Based on the Strain Gradient Theory [Volume 7, Issue 2, 2020, Pages 321-331]
  • Nonlinear longitudinal vibration A Semi-Analytical Nonlinear Approach for Size-Dependent Analysis of Longitudinal Vibration in Terms of Axially Functionally Graded Nanorods [Volume 11, Issue 2, 2024, Pages 453-466]
  • Nonlinear rotating elastic foundation Nonlinear Vibration of Rotating Laminated Composite Cross-ply Cylindrical Shell on Nonlinear Rotating Elastic Foundation [Volume 9, Issue 2, 2022, Pages 317-334]
  • Nonlinear strain Nonlinear Vibration Analysis of the Composite Cable using Perturbation Method and the Green-Lagrangian Nonlinear Strain [Volume 6, Issue 1, 2019, Pages 27-34]
  • Nonlinear torsional vibration Nonlinear Torsional Vibration Analysis of Nanorods in the Presence of Surface Energy Effect: Multi-Mode Galerkin Method [Volume 9, Issue 2, 2022, Pages 229-242]
  • Nonlinear vibration Sensitivity Analysis of Fiber-Reinforced Lamina Micro-Electro-Mechanical Switches with Nonlinear Vibration Using a Higher Order Hamiltonian Approach [Volume 5, Issue 1, 2018, Pages 25-39]
  • Nonlinear vibration Nonlinear Vibration Analysis of the Composite Cable using Perturbation Method and the Green-Lagrangian Nonlinear Strain [Volume 6, Issue 1, 2019, Pages 27-34]
  • Nonlinear vibration Buckling and Nonlinear Vibration of Functionally Graded Porous Micro-beam Resting on Elastic Foundation [Volume 9, Issue 1, 2022, Pages 75-88]
  • Nonlinear vibration Nonlinear Vibration of Rotating Laminated Composite Cross-ply Cylindrical Shell on Nonlinear Rotating Elastic Foundation [Volume 9, Issue 2, 2022, Pages 317-334]
  • Nonlinear viscoelastic Creep Strain and Stress Analysis in Laminated Composite Pres-sure Vessels [Volume 5, Issue 2, 2018, Pages 141-147]
  • Nonlocal Size-dependent Electro-Mechanical Vibration Analysis of FGPM Composite Plates using Modified Shear Deformation Theories [Volume 8, Issue 1, 2021, Pages 157-169]
  • Nonlocal Free Vibration and Buckling Analyses of Nanobeam Embedded in Pasternak Foundation [Volume 10, Issue 2, 2023, Pages 419-436]
  • Non-local buckling and vibration analysis Nonlocal Buckling and Vibration Analysis of Triple-Walled ZnO Piezoelectric Timoshenko Nano-beam Subjected to Magneto-Electro-Thermo-Mechanical Loadings [Volume 2, Issue 2, 2015, Pages 113-126]
  • Nonlocal elasticity Transverse Vibration for Non-uniform Timoshenko Nano-beams [Volume 2, Issue 1, 2015, Pages 1-16]
  • Nonlocal elasticity Free Vibrations Analysis of Functionally Graded Rectangular Nano-plates based on Nonlocal Exponential Shear Deformation Theory [Volume 2, Issue 2, 2015, Pages 79-93]
  • Nonlocal elasticity theory Nonlocal Analysis of Longitudinal Dynamic Behavior of Nanobars with Surface Energy Effect [Volume 6, Issue 2, 2019, Pages 147-158]
  • Nonlocal elasticity theory Vibration in an Electrically Affected Hygro-magneto-thermo-flexo Electric Nanobeam Embedded in Winkler-Pasternak Foundation [Volume 8, Issue 2, 2021, Pages 401-414]
  • Nonlocal elasticity theory Application of Bi-Directional Functionally Graded Material Model for Free Vibration Analysis of Rotating Euler-Bernoulli Nanobeams [Volume 8, Issue 2, 2021, Pages 389-399]
  • Nonlocal elasticity theory A Semi-Analytical Nonlinear Approach for Size-Dependent Analysis of Longitudinal Vibration in Terms of Axially Functionally Graded Nanorods [Volume 11, Issue 2, 2024, Pages 453-466]
  • Nonlocal parameter Buckling Analysis of Sandwich Timoshenko Nanobeams with AFG Core and Two Metal Face-Sheets [Volume 10, Issue 2, 2023, Pages 319-332]
  • Nonlocal strain gradient theory Buckling and Nonlinear Vibration of Functionally Graded Porous Micro-beam Resting on Elastic Foundation [Volume 9, Issue 1, 2022, Pages 75-88]
  • Nonlocal theory Analytical Approach for Thermo-electro-mechanical Vibration of Piezoelectric Nanoplates Resting on Elastic Foundations based on Nonlocal Theory [Volume 6, Issue 2, 2019, Pages 117-129]
  • Nonlocal thermoelasticity Influence of Electromagnetic Generalized Thermoelasticity Interactions with Nonlocal Effects under Temperature-Dependent Properties in a Solid Cylinder [Volume 10, Issue 1, 2023, Pages 157-166]
  • Non-uniform nano-beam Transverse Vibration for Non-uniform Timoshenko Nano-beams [Volume 2, Issue 1, 2015, Pages 1-16]
  • Nonwovens Evaluation of Heat Resistance Characteristics of Fibrous Material for Cold Weather Application [Volume 11, Issue 1, 2024, Pages 231-238]
  • Normal mode analysis Elasto-Thermodiffusive Response in a Two-Dimensional Transversely Isotropic Medium [Volume 6, Issue 2, 2019, Pages 95-104]
  • Normal mode analysis Thermoelastic Interaction in a Three-Dimensional Layered Sandwich Structure [Volume 5, Issue 2, 2018, Pages 187-198]
  • Nose Radomes Experimental Investigation and Simulation of Electro-Mechanical Behaviour of Hybrid Sandwich Composite Radomes for Aerospace Applications [Volume 11, Issue 2, 2024, Pages 401-412]
  • Novolac resin Synthesis and Characterization Al2O3/Novolac/Fiberglass Nanocomposite: Modification of Thermal Stability and Thermal Insulation Properties [Volume 10, Issue 1, 2023, Pages 21-28]
  • Novolac resin Preparation, Identification, and Evaluation of the Thermal Properties of Novolac Resins Modified with TiO2, MgO, and V2O5 Oxides [Volume 11, Issue 1, 2024, Pages 1-9]
  • NSGAII A Comprehensive Comparison between Multi-Objective Optimization Methods for Composite Hexagonal-Triangle Grid Structure using FSDT under External Hydrostatic Pressure [Volume 11, Issue 1, 2024, Pages 177-190]
  • Numerical analysis Design and Experimental/Numerical Analysis of Metal-Composite Vessel with Spherical Cap under Internal Pressure [Volume 10, Issue 2, 2023, Pages 247-256]
  • Numerical Approach An Experimental and Numerical Approach of Polymer Composites Based on Jute-Bamboo Natural Fiber [Volume 9, Issue 1, 2022, Pages 105-113]
  • Numerical Method A Numerical and Analytical Solution for the Free Vibration of Laminated Composites Using Different Plate Theories [Volume 4, Issue 1, 2017, Pages 75-87]
  • Numerical methods Strengthening of Deficient Steel Sections using CFRP Composite under Combined Loading [Volume 7, Issue 2, 2020, Pages 287-296]
  • Numerical simulation Springback Prediction of Sandwich Panel Using Machine Learning Methods [Volume 10, Issue 1, 2023, Pages 11-20]
  • Numerical simulation Experimental and Numerical Study on the Strength of Repaired Steel Pipes with Composite Patches under Internal Pressure [Volume 10, Issue 2, 2023, Pages 437-448]
  • Numerical Solution Analytical and Numerical Solution of Heat Transfer Equation in Rectangular Composite Fins [Volume 9, Issue 1, 2022, Pages 199-211]

O

  • One-way reinforced concrete slab Strengthening of One-Way Slabs Using Composite Laminates of HPFRCC Including Synthetic Fibers PPS [Volume 9, Issue 1, 2022, Pages 185-197]
  • Open-Hole Specimens Open-Hole Size and Thermal Cycling Effects on Mass Loss and Surface Degradation of Polymer Matrix Composites [Volume 4, Issue 2, 2017, Pages 111-116]
  • Optimization Vibration Optimization of Fiber-Metal Laminated Composite Shallow Shell Panels Using an Adaptive PSO Algorithm [Volume 4, Issue 2, 2017, Pages 99-110]
  • Optimization Mechanical Behavior and Optimization of Functionally Graded Hollow Cylinder with an Elliptic Hole [Volume 7, Issue 2, 2020, Pages 189-201]
  • Optimization An Investigation on Three-Point Bending of Foam-Filled Double Tubes and Parameter Optimization Using Response Surface Methodology [Volume 8, Issue 1, 2021, Pages 41-50]
  • Optimization Simulation and Optimization of Fatigue Life of Carbon-Epoxy Composite Sub Frame [Volume 9, Issue 1, 2022, Pages 37-47]
  • Optimization Maximization of Fundamental Frequency of Composite Stiffened Hypar Shell with Cutout by Taguchi Method [Volume 10, Issue 1, 2023, Pages 43-54]
  • Optimization Optimization of Wear Behaviour on Mg-TiO2 Nanocomposite Using Taguchi Grey Relational Analysis [Volume 10, Issue 1, 2023, Pages 151-156]
  • Optimization Minimal Mass and Maximal Buckling Load of Composite Hexagonal-Triangle Grid Structure using FSDT under External Hydrostatic Pressure [Volume 10, Issue 2, 2023, Pages 309-318]
  • Optimization method Improving the Performance of the Sandwich Panel with the Corrugated Core Filled with Metal Foam: Mathematical and Numerical Methods [Volume 6, Issue 2, 2019, Pages 249-261]

P

  • Paint coatings Green Anticorrosion Coating with Low VOCs Emission using Moringa Oleifera Leaves Extract [Volume 9, Issue 1, 2022, Pages 163-171]
  • Parametric instability Dynamic Stability of Moderately Thick Composite Laminated Skew Plates using Finite Strip Method [Volume 2, Issue 2, 2015, Pages 145-150]
  • Particle swarm optimization Optimization of infinite composite plates with quasi-triangular holes under in-plane loading [Volume 5, Issue 2, 2018, Pages 115-130]
  • Pasternak foundation Free Vibration and Buckling Analyses of Nanobeam Embedded in Pasternak Foundation [Volume 10, Issue 2, 2023, Pages 419-436]
  • Patch load A Meshfree Approach for Bending Analysis of Porous Rectangular FGM Plate Resting on Elastic Foundation [Volume 9, Issue 2, 2022, Pages 303-316]
  • PDE Quick Review and Assessment of Thermal Stress Analyses for Exact and Assumed Temperature Distribution for Composite and Sandwich Laminates [Volume 10, Issue 2, 2023, Pages 343-362]
  • PDQM Free Vibration and Buckling Analyses of Nanobeam Embedded in Pasternak Foundation [Volume 10, Issue 2, 2023, Pages 419-436]
  • Peel and shear stresses Semi Analytical Transient Dynamic Analysis of Composite Adhesive Single-lap Joints [Volume 7, Issue 1, 2020, Pages 137-145]
  • Perforated plate Thermal Buckling and Thermal Induced free Vibration Analysis of Perforated Composite Plates: a Mathematical Model [Volume 7, Issue 1, 2020, Pages 15-23]
  • Perturbation technique Non-Linear Analysis of Functionally Graded Sector Plates with Simply Supported Radial Edges Under Transverse Loading [Volume 6, Issue 1, 2019, Pages 65-74]
  • Phase transformation Adaptive Tunable Vibration Absorber using Shape Memory Alloy [Volume 2, Issue 1, 2015, Pages 55-60]
  • Phenolic resin Accelerated Heat Aging Study of Phenolic/Basalt Fiber Reinforced Composites [Volume 3, Issue 1, 2016, Pages 1-7]
  • Physical foaming method Influence of Different Foaming Conditions on the Mechanical, Physical, and Structural Properties of Polypropylene Foam [Volume 6, Issue 2, 2019, Pages 225-237]
  • Physical properties Improving the Performance of Porous Concrete Composites Using Zeolite as a Coarse Grain [Volume 5, Issue 2, 2018, Pages 157-163]
  • Physical properties Physical and Mechanical Properties of Biodegradable Film from Taro Starch (Xanthosoma Sagittifolium) and Duck Bone Gelatin [Volume 9, Issue 2, 2022, Pages 213-220]
  • Physio-mechanical characterization Influence of Graphene Powder on the Physio-Mechanical Properties of Jute Reinforced Epoxy Composites for Automobile Applications [Volume 11, Issue 1, 2024, Pages 239-248]
  • PID Controller Active Vibration Control of Laminated Composite Beam Operating in Thermal Environment using PZT-5H Patches [Volume 9, Issue 2, 2022, Pages 387-398]
  • Piezoelectric Nonlinear Magneto-Nonlocal Vibration Analysis of Coupled Piezoelectric Micro-Plates Reinforced with Agglomerated CNTs [Volume 7, Issue 1, 2020, Pages 109-119]
  • Piezoelectric Size-Dependent Nonlinear Dynamics of a Non-Uniform Piezoelectric Microbeam Based on the Strain Gradient Theory [Volume 7, Issue 2, 2020, Pages 321-331]
  • Piezoelectric Electro-Elastic Analysis of Finite Length FGPM Cylinders Subjected to Electromechanical Loading Using First-Order Electric Potential Theory [Volume 8, Issue 1, 2021, Pages 15-31]
  • Piezo-electric Transient Thermal Stresses Analysis in a FPGM Cylinder [Volume 6, Issue 2, 2019, Pages 81-94]
  • Piezoelectric layer Analytical Solution for Sound Radiation of Vibrating Circular Plates coupled with Piezo-electric Layers [Volume 3, Issue 2, 2016, Pages 89-98]
  • Piezoelectric nanoplates Analytical Approach for Thermo-electro-mechanical Vibration of Piezoelectric Nanoplates Resting on Elastic Foundations based on Nonlocal Theory [Volume 6, Issue 2, 2019, Pages 117-129]
  • Piezoelectric plates Fluid-Structure Interaction of Vibrating Composite Piezoelectric Plates Using Exponential Shear Deformation Theory [Volume 7, Issue 1, 2020, Pages 59-69]
  • Pineapple leaf fibre Modeling the Buckling Characteristics of Pineapple Leaf Fibre Reinforced Laminated Epoxy Composites [Volume 10, Issue 2, 2023, Pages 233-246]
  • Plane elasticity Elastic analysis of Shrink-fitted Thick FGM Cylinders Based on Linear Plane Elasticity Theory [Volume 7, Issue 1, 2020, Pages 121-127]
  • Plantain Fiber Composite The Graft of ANN-FEM Technique in Macro-mechanics of Multi-oriented Natural Fiber/Polyester Laminates [Volume 8, Issue 1, 2021, Pages 51-68]
  • Plant extract Green Anticorrosion Coating with Low VOCs Emission using Moringa Oleifera Leaves Extract [Volume 9, Issue 1, 2022, Pages 163-171]
  • PM (CoFe2O4) material Analysis of SH-waves Propagating in Multiferroic Structure with Interfacial Imperfection [Volume 9, Issue 1, 2022, Pages 1-10]
  • Polyester Polyester/Kota Stone Dust Composite: A Comprehensive Investigation of Mechanical and Sliding Wear Properties [Volume 11, Issue 2, 2024, Pages 375-384]
  • Polyester fibres Evaluation of Heat Resistance Characteristics of Fibrous Material for Cold Weather Application [Volume 11, Issue 1, 2024, Pages 231-238]
  • Poly(ethylene-g-maleic anhydride) Cured Poly(ethylene-g-maleic anhydride)/Graphene Nanocomposite: Properties and Characterization [Volume 5, Issue 1, 2018, Pages 1-12]
  • Polymer Graphene-based Polymer Nano-composites - A Review [Volume 7, Issue 2, 2020, Pages 333-346]
  • Polymer matrix composite 3D Numerical Simulation of Fibers Arrangement Effects On Thermal Conductivity of Polymer Matrix Composite [Volume 9, Issue 1, 2022, Pages 59-73]
  • Polymer matrix composite Statistical Approach of Determining the Effect of Cenosphere on the Tribological Behaviour of Jute Reinforced Polymer Based Composite [Volume 10, Issue 1, 2023, Pages 211-220]
  • Polymer matrix composites Creep Strain and Stress Analysis in Laminated Composite Pres-sure Vessels [Volume 5, Issue 2, 2018, Pages 141-147]
  • Polymer matrix composites Tensile and Flexural Properties of 3D-Printed Polylactic Acid/Continuous Carbon Fiber Composite [Volume 10, Issue 2, 2023, Pages 407-418]
  • Polymer-matrix composites Accelerated Heat Aging Study of Phenolic/Basalt Fiber Reinforced Composites [Volume 3, Issue 1, 2016, Pages 1-7]
  • Polymer-matrix composites Investigation of Tensile Characteristics of an Epoxy Matrix Com-posite with Uni-Directional and Hybrid Tissue Natural Hemp Fibers [Volume 6, Issue 2, 2019, Pages 181-190]
  • Polymer-matrix composites (PMCs) Short Literature Survey on Fiber-Reinforced Hybrid Composites [Volume 11, Issue 2, 2024, Pages 425-452]
  • Polymer Matrix Composites (PMCs) Open-Hole Size and Thermal Cycling Effects on Mass Loss and Surface Degradation of Polymer Matrix Composites [Volume 4, Issue 2, 2017, Pages 111-116]
  • Polymer-modified mortar Study of Bond Strength between Polymer-Modified Mortars/Concrete and Their Mechanical Properties using “Friction-Transfer” and “Pull-off” Methods [Volume 8, Issue 1, 2021, Pages 171-184]
  • Polymer nanocomposites Mechanical Properties of CNT-Reinforced Polymer Nano-composites: A Molecular Dynamics Study [Volume 3, Issue 2, 2016, Pages 113-121]
  • Polymer nanocomposites Interfacial Characteristics of Graphene/Polymer Nanocomposites by Molecular Dynamics Simulation and Evaluating Effects of that on Mechanical Properties of Nanocomposites by FEM [Volume 11, Issue 2, 2024, Pages 321-334]
  • Poly (O-Toluidine) The Effect of the Solvents on Electrical Properties of POT Conducting Polymer [Volume 8, Issue 2, 2021, Pages 283-289]
  • Polypropylene Influence of Different Foaming Conditions on the Mechanical, Physical, and Structural Properties of Polypropylene Foam [Volume 6, Issue 2, 2019, Pages 225-237]
  • Polystyrene Mechanical, Crystallographic, and Microstructural Analysis of Polymer Composites Developed from Iron Filings and Polystyrene Wastes [Volume 9, Issue 1, 2022, Pages 137-145]
  • Polyurethane foam Crashworthiness Study of an Innovative Helmet Liner Composed of an Auxetic Lattice Structure and PU Foam [Volume 9, Issue 1, 2022, Pages 25-35]
  • Polyurthane Numerical Crashworthiness Analysis of Graded Layered Foam- Filled Tubes Under Axial Loading [Volume 6, Issue 1, 2019, Pages 57-64]
  • Porosity Static Buckling and Free Vibration Analysis of Bi-Dimensional FG Metal Ceramic Porous Beam [Volume 11, Issue 1, 2024, Pages 149-158]
  • Porous bi-directional functionally graded materials Numerical Investigation on Free Vibration Response of Bi-Directional Porous Functionally Graded Circular/Annular Plates [Volume 9, Issue 2, 2022, Pages 243-262]
  • Porous concrete Improving the Performance of Porous Concrete Composites Using Zeolite as a Coarse Grain [Volume 5, Issue 2, 2018, Pages 157-163]
  • Porous FGB On Numerical Investigation of Buckling in Two-Directional Porous Functionally Graded Beam Using Higher Order Shear Deformation Theory [Volume 10, Issue 2, 2023, Pages 393-406]
  • Powder characteristics Effect of Particle Size on the Structural and Mechanical Properties of Al–AlN Nanocomposites Fabricated by Mechanical Alloying [Volume 2, Issue 2, 2015, Pages 73-78]
  • Powder injection molding On the Study of Mechanical Properties of Aluminum/Nano-Alumina Composites Produced via Powder Injection Molding [Volume 3, Issue 1, 2016, Pages 45-51]
  • Powder metallurgy Experimental Investigation of FGM Dental Implant Properties Made from Ti/HA Composite [Volume 4, Issue 3, 2017, Pages 233-237]
  • Powder metallurgy Metallurgical Assessment of Graphite Reinforced Al-Cu-Mg Nanocomposites Produced by the Shaker Mill Method [Volume 10, Issue 1, 2023, Pages 103-110]
  • Power law Buckling Analysis of Functionally Graded Sandwich Beam Based on Third-Order Zigzag Theory [Volume 10, Issue 1, 2023, Pages 55-68]
  • Power law Higher Order Approximations for Bending of FG Beams Using B-Spline Collocation Technique [Volume 11, Issue 1, 2024, Pages 159-176]
  • Power law Free Vibration Analysis of Simply Supported and Clamped Functionally Graded Rectangular Plate Using Coupled Displacement Field Method [(Articles in Press)]
  • Power law index An Investigation of Stress and Deformation Behavior of Functionally Graded Timoshenko Beams subjected to Thermo-Mechanical Load [Volume 7, Issue 1, 2020, Pages 157-176]
  • Power Series Method Finite Element Modeling for Buckling Analysis of Tapered Axially Functionally Graded Timoshenko Beam on Elastic Foundation [Volume 7, Issue 2, 2020, Pages 203-218]
  • Prandtl-Reuss flow rule Elastoplastic Analysis of Pressurized FG rotating Thick Cylinders Based on High-Order Shear Deformation Theory and Radial Return Method [Volume 11, Issue 1, 2024, Pages 119-130]
  • Precision closed-form solution Precision Closed-form Solution for Out-of-plane Vibration of Rectangular Plates via Trigonometric Shear Deformation Theory [Volume 3, Issue 1, 2016, Pages 31-43]
  • Pressure Vessel Failure Pressure Prediction of Semi Spherical GFRP Shells in Thermal Environment [Volume 7, Issue 1, 2020, Pages 103-108]
  • Pre-stress loading Size-dependent Effects on the Vibration Behavior of a Ti-moshenko Microbeam subjected to Pre-stress Loading based on DQM [Volume 3, Issue 2, 2016, Pages 99-112]
  • Primary resonance Size-Dependent Nonlinear Dynamics of a Non-Uniform Piezoelectric Microbeam Based on the Strain Gradient Theory [Volume 7, Issue 2, 2020, Pages 321-331]
  • Process Parameters Optimization of Wear Behaviour on Mg-TiO2 Nanocomposite Using Taguchi Grey Relational Analysis [Volume 10, Issue 1, 2023, Pages 151-156]
  • Properties Mechanical, Crystallographic, and Microstructural Analysis of Polymer Composites Developed from Iron Filings and Polystyrene Wastes [Volume 9, Issue 1, 2022, Pages 137-145]
  • PSI Feasibility Study On Application Of Various MADM Approaches For Selection Of Kenaf/Saw Dust Composite [(Articles in Press)]
  • Pultrusion Mechanical and Physical Properties of Glass-Fiber Reinforced Polymer Rods Manufactured by Different Pultrusion Methods [Volume 8, Issue 1, 2021, Pages 99-107]
  • Pyrolysis In Situ Formation of SiC/CNT Ceramic Nanocomposite by Phenolic Pyrolysis [Volume 1, Issue 2, 2014, Pages 87-96]
  • PZT actuators Active Vibration Control of Laminated Composite Beam Operating in Thermal Environment using PZT-5H Patches [Volume 9, Issue 2, 2022, Pages 387-398]

Q

  • Quasi-static impact Experimental Investigation on Quasi-Static Impact Response of Glass/Epoxy Composite Corrugated Core Sandwich Panels [Volume 10, Issue 2, 2023, Pages 283-294]
  • Quasi-triangular hole Optimization of infinite composite plates with quasi-triangular holes under in-plane loading [Volume 5, Issue 2, 2018, Pages 115-130]

R

  • Radial return method Elastoplastic Analysis of Pressurized FG rotating Thick Cylinders Based on High-Order Shear Deformation Theory and Radial Return Method [Volume 11, Issue 1, 2024, Pages 119-130]
  • Rayleigh-Ritz Free Vibration Analysis of Size-Dependent, Functionally Graded, Rectangular Nano/Micro-plates based on Modified Nonlinear Couple Stress Shear Deformation Plate Theories [Volume 4, Issue 2, 2017, Pages 127-137]
  • Rayleigh-Ritz Effect of Elastically Restrained Edges on Free Transverse Vibration of Functionally Graded Porous Rectangular Plate [Volume 9, Issue 2, 2022, Pages 335-348]
  • RBF Assessment of RBFs Based Meshfree Method for the Vibration Response of FGM Rectangular Plate Using HSDT Model [Volume 10, Issue 1, 2023, Pages 137-150]
  • Rectangular plates Free Natural Frequency Analysis of an FG Composite Rectangular Plate Coupled with Fluid using Rayleigh–Ritz Method [Volume 1, Issue 2, 2014, Pages 131-143]
  • Reddy’ s Higher Order Shear Deformation Theory Comparison of Deflection in Two-Directional Functionally Graded Tapered Beam [Volume 11, Issue 1, 2024, Pages 191-202]
  • Reddy' s third-order shear theory Buckling Analysis of Composite Grid-Stiffened Cylindrical Shells Using a Generalized Equivalent Single Layer Theory [Volume 8, Issue 2, 2021, Pages 455-466]
  • Refined beam theory Vibration in an Electrically Affected Hygro-magneto-thermo-flexo Electric Nanobeam Embedded in Winkler-Pasternak Foundation [Volume 8, Issue 2, 2021, Pages 401-414]
  • Refined plate theory Free Vibration and Buckling Analyses of Functionally Graded Nanocomposite Plates Reinforced by Carbon Nanotube [Volume 4, Issue 1, 2017, Pages 59-73]
  • Reinforced Material Analysis of SH-waves Propagating in Multiferroic Structure with Interfacial Imperfection [Volume 9, Issue 1, 2022, Pages 1-10]
  • Reliability Study of High-cycle Fatigue Properties in Bovine Tibia Bones based on Reliability and Scatter-band Predictions [Volume 7, Issue 2, 2020, Pages 255-261]
  • Repaired steel pipe Experimental and Numerical Study on the Strength of Repaired Steel Pipes with Composite Patches under Internal Pressure [Volume 10, Issue 2, 2023, Pages 437-448]
  • Residual stresses Distribution of Residual Stresses in Polymer Reinforced Carbon Nanotubes and Laminated Carbon Fibers [Volume 4, Issue 1, 2017, Pages 9-18]
  • Response surface methodology (RSM) An Investigation on Three-Point Bending of Foam-Filled Double Tubes and Parameter Optimization Using Response Surface Methodology [Volume 8, Issue 1, 2021, Pages 41-50]
  • Response surface method (RSM) Analyzing and Improving Flexural and Impact Strength of Composites Enhanced with Nanoparticles and Natural Fibers [Volume 11, Issue 2, 2024, Pages 467-482]
  • Rheology Synthesis and Characterization of Polymer/Nanosilicagel Nano-composites [Volume 4, Issue 1, 2017, Pages 1-8]
  • Ribbed composite plate An Analytical Approach to Thermoelastic Bending of Simply Supported Advanced Ribbed Composite Plates [Volume 5, Issue 2, 2018, Pages 173-185]
  • Rigid cylindrical indenter An Analytical Study on the Indentation of a Layered Composite Beam and its Utilization in Low Velocity Impact Response [Volume 9, Issue 1, 2022, Pages 155-162]
  • Ritz method A Novel Approach for Lateral Buckling Assessment of Double Tapered Thin-Walled Laminated Composite I-Beams [Volume 9, Issue 1, 2022, Pages 11-23]
  • Rotating cylinder A Case Study on the Influence of Friction Coefficient and Rotational Speed on Transient Thermoelastic Response of FGM Rotating Cylinder [Volume 9, Issue 2, 2022, Pages 399-408]
  • Rotating Disk Stress Analysis of the Rotating Carbon-Carbon Composite Disk of an Axial Compressor [Volume 10, Issue 2, 2023, Pages 271-282]
  • Rotating FGM disk Stress Analysis of FGM Rotating Disk Subjected to Mechanical and Thermal Loads In Aircraft Gas Turbine Engine [Volume 7, Issue 1, 2020, Pages 1-13]
  • Rotating laminated composite cross-ply cylindrical shell Nonlinear Vibration of Rotating Laminated Composite Cross-ply Cylindrical Shell on Nonlinear Rotating Elastic Foundation [Volume 9, Issue 2, 2022, Pages 317-334]
  • Rotating laminated composite cylindrical shell Active control of free and forced vibration of rotating laminated composite cylindrical shells embedded with magnetostrictive layers based on classical shell theory [Volume 7, Issue 2, 2020, Pages 355-369]
  • Rotating nanobeam Application of Bi-Directional Functionally Graded Material Model for Free Vibration Analysis of Rotating Euler-Bernoulli Nanobeams [Volume 8, Issue 2, 2021, Pages 389-399]
  • Rotational speed A Case Study on the Influence of Friction Coefficient and Rotational Speed on Transient Thermoelastic Response of FGM Rotating Cylinder [Volume 9, Issue 2, 2022, Pages 399-408]
  • RSM Experimental Study of Buckling of Reinforced Conical Composite Shell Under Hydrostatic Loading [Volume 9, Issue 2, 2022, Pages 359-366]
  • RSM analysis Optimization of AA6351-SiC-B4C Hybrid Composites in Wire EDM Using Grey Relation Technique [Volume 11, Issue 2, 2024, Pages 385-400]

S

  • SAMURAI and ME’ Scope software Experimental Modal Analysis of Viscoelastic Sandwich Structures [(Articles in Press)]
  • Sandwich A Quasi-3D Polynomial Shear and Normal Deformation Theory for Laminated Composite, Sandwich, and Functionally Graded Beams [Volume 4, Issue 2, 2017, Pages 139-152]
  • Sandwich Higher-order Displacement Model for Cylindrical Bending of Laminated and Sandwich Plates Subjected to Environmental Loads [Volume 8, Issue 1, 2021, Pages 185-201]
  • Sandwich Vibration and Buckling Analysis of Skew Sandwich Plate using Radial Basis Collocation Method [Volume 10, Issue 2, 2023, Pages 383-392]
  • Sandwich beam Static Flexure of Soft Core Sandwich Beams using Trigonometric Shear Deformation Theory [Volume 2, Issue 1, 2015, Pages 45-53]
  • Sandwich nanobeam Buckling Analysis of Sandwich Timoshenko Nanobeams with AFG Core and Two Metal Face-Sheets [Volume 10, Issue 2, 2023, Pages 319-332]
  • Sandwich plate Mesh-free Dynamic Analyses of FGM Sandwich Plates Resting on A Pasternak Elastic Foundation [Volume 4, Issue 2, 2017, Pages 153-168]
  • Sandwich porous plates Nonlinear Dynamic Analysis of Annular FG Porous Sandwich Plates Reinforced by Graphene Platelets [Volume 11, Issue 1, 2024, Pages 131-148]
  • Sandwich structure Low-velocity Impact Response of Viscoelastic Composite Laminates Considering Large Deflection and Higher-order Shear Deformation [Volume 8, Issue 2, 2021, Pages 425-434]
  • Sandwich structures Three-dimensional elasticity solution for vibrational analysis of thick continuously graded sandwich plates with different boundary conditions using a two-parameter micromechanical model for agglomeration [Volume 5, Issue 1, 2018, Pages 49-66]
  • Sandwich structures Buckling Analysis of Sandwich Structures with Metamaterials Core Integrated by Graphene Nanoplatelets Reinforced Polymer Composite [Volume 10, Issue 1, 2023, Pages 1-10]
  • Sandwich structures Experimental Modal Analysis of Viscoelastic Sandwich Structures [(Articles in Press)]
  • Sandwich theory A Novel Method for Considering Interlayer Effects between Graphene Nanoribbons and Elastic Medium in Free Vibration Analysis [Volume 7, Issue 1, 2020, Pages 79-88]
  • Scanning electron microscopy Experimental Study on Dynamic Behavior of Acrylonitrile-Butadiene-Styrene (ABS) Based Nano Composite Reinforced by Nano Silica Addition [Volume 7, Issue 2, 2020, Pages 313-320]
  • Scatter-band Study of High-cycle Fatigue Properties in Bovine Tibia Bones based on Reliability and Scatter-band Predictions [Volume 7, Issue 2, 2020, Pages 255-261]
  • Schapery single integral Creep Strain and Stress Analysis in Laminated Composite Pres-sure Vessels [Volume 5, Issue 2, 2018, Pages 141-147]
  • Scientometric Mapping Studies on Progress of Aluminium Based Composites for Automotive Applications and its Damping Characteristics – A Review [(Articles in Press)]
  • Sectorial plate Non-Linear Analysis of Functionally Graded Sector Plates with Simply Supported Radial Edges Under Transverse Loading [Volume 6, Issue 1, 2019, Pages 65-74]
  • SEM Effect of Aging on Fracture Toughness of Al6061-Graphite Particulate Composites [Volume 6, Issue 2, 2019, Pages 139-146]
  • SEM Influence of Filler Content on the Mechanical, Thermal, Moisture Absorption, and Biodegradability Properties of Bionanocomposite with Cellulosic Fibers Derived from Delonix Regia Fruits [Volume 11, Issue 1, 2024, Pages 73-86]
  • SEM Experimental and Numerical Analysis of Woven Bamboo and Jute Fiber Reinforced in Epoxy Composites [Volume 11, Issue 1, 2024, Pages 103-118]
  • SEM analysis Microstructure & Mechanical Properties Evaluation of Al6082 /AlSi10Mg Composite for Light Weight Structural Applications [Volume 11, Issue 2, 2024, Pages 309-320]
  • Semi-analytical method Functionally Graded Piezoelectric Plates in Cylindrical Bending by Semi-analytical Approach [Volume 9, Issue 2, 2022, Pages 409-424]
  • Semi-destructive tests Study of Bond Strength between Polymer-Modified Mortars/Concrete and Their Mechanical Properties using “Friction-Transfer” and “Pull-off” Methods [Volume 8, Issue 1, 2021, Pages 171-184]
  • Sensitivity analysis Sensitivity Analysis of Fiber-Reinforced Lamina Micro-Electro-Mechanical Switches with Nonlinear Vibration Using a Higher Order Hamiltonian Approach [Volume 5, Issue 1, 2018, Pages 25-39]
  • Sensitivity analysis Sensitivity Analysis of Vibrating Laminated Composite Rec-tangular Plates in Interaction with Inviscid Fluid Using EFAST Method [Volume 7, Issue 2, 2020, Pages 219-231]
  • Sensor type Health Monitoring for Composite under Low-Cycle Cyclic Loading, Considering Effects of Acoustic Emission Sensor Type [Volume 6, Issue 1, 2019, Pages 19-26]
  • Shaker Mill Metallurgical Assessment of Graphite Reinforced Al-Cu-Mg Nanocomposites Produced by the Shaker Mill Method [Volume 10, Issue 1, 2023, Pages 103-110]
  • Shallow Shell Vibration Optimization of Fiber-Metal Laminated Composite Shallow Shell Panels Using an Adaptive PSO Algorithm [Volume 4, Issue 2, 2017, Pages 99-110]
  • Shape Functions Finite Element Modeling for Buckling Analysis of Tapered Axially Functionally Graded Timoshenko Beam on Elastic Foundation [Volume 7, Issue 2, 2020, Pages 203-218]
  • Shape memory alloy Adaptive Tunable Vibration Absorber using Shape Memory Alloy [Volume 2, Issue 1, 2015, Pages 55-60]
  • Shape memory alloy Compression Analysis of Hollow Cylinder Basalt Continuous Filament Epoxy Composite Filled with Shape Memory Wire [Volume 4, Issue 3, 2017, Pages 225-232]
  • Shear and normal deformation A Quasi-3D Polynomial Shear and Normal Deformation Theory for Laminated Composite, Sandwich, and Functionally Graded Beams [Volume 4, Issue 2, 2017, Pages 139-152]
  • Shear deformation Higher-order Displacement Model for Cylindrical Bending of Laminated and Sandwich Plates Subjected to Environmental Loads [Volume 8, Issue 1, 2021, Pages 185-201]
  • Shear deformation A New Higher-Order Shear and Normal Deformation Theory for the Free Vibration Analysis of Laminated Shells [Volume 9, Issue 1, 2022, Pages 89-104]
  • Shear Deformation Theory Electro-Elastic Analysis of Finite Length FGPM Cylinders Subjected to Electromechanical Loading Using First-Order Electric Potential Theory [Volume 8, Issue 1, 2021, Pages 15-31]
  • Shear Deformation Theory Elastoplastic Analysis of Pressurized FG rotating Thick Cylinders Based on High-Order Shear Deformation Theory and Radial Return Method [Volume 11, Issue 1, 2024, Pages 119-130]
  • Shear effects A Novel Method for Considering Interlayer Effects between Graphene Nanoribbons and Elastic Medium in Free Vibration Analysis [Volume 7, Issue 1, 2020, Pages 79-88]
  • Shear horizontal transverse wave Propagation of shear horizontal wave at magneto-electro-elastic structure subjected to mechanically imperfect interface [(Articles in Press)]
  • Shear Stress Higher Order Approximations for Bending of FG Beams Using B-Spline Collocation Technique [Volume 11, Issue 1, 2024, Pages 159-176]
  • Short carbon fibers Mechanical and Tribological Behaviors of Chopped Carbon/Glass Fiber Reinforced Hybrid Epoxy Composites [Volume 9, Issue 2, 2022, Pages 349-358]
  • Short glass fibers Mechanical and Tribological Behaviors of Chopped Carbon/Glass Fiber Reinforced Hybrid Epoxy Composites [Volume 9, Issue 2, 2022, Pages 349-358]
  • Shrink-fit Elastic analysis of Shrink-fitted Thick FGM Cylinders Based on Linear Plane Elasticity Theory [Volume 7, Issue 1, 2020, Pages 121-127]
  • SHS Effects of Horizontal Deficiency Location on the Structural Behaviors of Steel SHS Short Columns Strengthened using CFRP [Volume 7, Issue 1, 2020, Pages 39-47]
  • SHS steel sections Strengthening of Deficient Steel Sections using CFRP Composite under Combined Loading [Volume 7, Issue 2, 2020, Pages 287-296]
  • Signal-to-noise ratio Numerical Optimization of Non-destructive Ultrasonic Testing in Identifying Defects in Composite Structure of Pine Tree Trunk [Volume 11, Issue 1, 2024, Pages 249-258]
  • Silica Synthesis and Characterization of Polymer/Nanosilicagel Nano-composites [Volume 4, Issue 1, 2017, Pages 1-8]
  • Silicon carbide Experimental Study on Surface Roughness and Cutting Force in Turning of Al7032 Reinforced with SiC Using Taguchi Design [Volume 8, Issue 1, 2021, Pages 69-76]
  • Silicon carbide The Effect of Nano-B4C Additive on Microstructure and Mechanical Properties of Pressureless Sintering SiC Bodies [Volume 10, Issue 1, 2023, Pages 29-42]
  • Silicon particles In Situ Formation of SiC/CNT Ceramic Nanocomposite by Phenolic Pyrolysis [Volume 1, Issue 2, 2014, Pages 87-96]
  • Silicon sealant Experimental Study on Double-Walled Copper and Carbon/Epoxy Composite Tubes under the Axial Loading [Volume 1, Issue 2, 2014, Pages 71-79]
  • Simple blade Thermoelastic Analysis of a Functionally Graded Simple Blade Using First-Order Shear Deformation Theory [Volume 7, Issue 1, 2020, Pages 147-155]
  • Simple theory Nonlocal Analysis of Longitudinal Dynamic Behavior of Nanobars with Surface Energy Effect [Volume 6, Issue 2, 2019, Pages 147-158]
  • Simulation of waves Numerical Optimization of Non-destructive Ultrasonic Testing in Identifying Defects in Composite Structure of Pine Tree Trunk [Volume 11, Issue 1, 2024, Pages 249-258]
  • Single-layer Graphene Sheets Geometric Effects on Nanopore Creation in Graphene and on the Impact-withstanding Efficiency of Graphene Nanosheets [Volume 5, Issue 1, 2018, Pages 91-102]
  • Sintered Steel Sintered Steel Composites Reinforced with Ceramic Nanoparticles: Fabrication, Characteristics and Wear Behavior [Volume 6, Issue 2, 2019, Pages 191-200]
  • Sintering Metallurgical Assessment of Graphite Reinforced Al-Cu-Mg Nanocomposites Produced by the Shaker Mill Method [Volume 10, Issue 1, 2023, Pages 103-110]
  • Size-dependent Size-dependent Bending of Geometrically Nonlinear of Micro-Laminated Composite Beam based on Modified Couple Stress Theory [Volume 3, Issue 1, 2016, Pages 53-62]
  • Size dependent effect Size-dependent Effects on the Vibration Behavior of a Ti-moshenko Microbeam subjected to Pre-stress Loading based on DQM [Volume 3, Issue 2, 2016, Pages 99-112]
  • Size effects Size-dependent Vibration Analysis of Non-uniform Mass Sensor Nanobeams [Volume 8, Issue 2, 2021, Pages 235-244]
  • Skew plate Dynamic Stability of Moderately Thick Composite Laminated Skew Plates using Finite Strip Method [Volume 2, Issue 2, 2015, Pages 145-150]
  • Skew plate Vibration and Buckling Analysis of Skew Sandwich Plate using Radial Basis Collocation Method [Volume 10, Issue 2, 2023, Pages 383-392]
  • Sliding Wear Rate Polyester/Kota Stone Dust Composite: A Comprehensive Investigation of Mechanical and Sliding Wear Properties [Volume 11, Issue 2, 2024, Pages 375-384]
  • Sloshing fluid Free Natural Frequency Analysis of an FG Composite Rectangular Plate Coupled with Fluid using Rayleigh–Ritz Method [Volume 1, Issue 2, 2014, Pages 131-143]
  • Small failure probabilities Failure Probability Analysis of Composite Pressure Tanks Using Subset Simulation [Volume 11, Issue 2, 2024, Pages 363-374]
  • Smart nanocomposite plate Biaxial Buckling and Bending of Smart Nanocomposite Plate Reinforced by CNTs using Extended Mixture Rule Approach [Volume 1, Issue 1, 2014, Pages 17-26]
  • Smart plate On the Buckling the Behavior of a Multiphase Smart Plate based on a Higher-order Theory [Volume 4, Issue 1, 2017, Pages 47-58]
  • Soft core Static Flexure of Soft Core Sandwich Beams using Trigonometric Shear Deformation Theory [Volume 2, Issue 1, 2015, Pages 45-53]
  • Sol-gel Synthesis and Characterization of Polymer/Nanosilicagel Nano-composites [Volume 4, Issue 1, 2017, Pages 1-8]
  • Solid cylinder Influence of Electromagnetic Generalized Thermoelasticity Interactions with Nonlocal Effects under Temperature-Dependent Properties in a Solid Cylinder [Volume 10, Issue 1, 2023, Pages 157-166]
  • Sound power Analytical Solution for Sound Radiation of Vibrating Circular Plates coupled with Piezo-electric Layers [Volume 3, Issue 2, 2016, Pages 89-98]
  • Spark plasma sintering (SPS) Experimental Investigation of FGM Dental Implant Properties Made from Ti/HA Composite [Volume 4, Issue 3, 2017, Pages 233-237]
  • Specific energy absorption Experimental and Numerical Investigation on the Flexural Behavior of Composite-Reinforced Top-Hat Shape Beam [Volume 8, Issue 1, 2021, Pages 149-156]
  • Specific energy absorption Crashworthy Behavior of Plain Weave Glass/Epoxy Composite Tubes Containing Different Extents of Overlap of Dropped Plies [Volume 11, Issue 1, 2024, Pages 87-102]
  • Specific properties Mechanical Characterization of Glass-Basalt Hybrid Composites with Different Fiber Weight Fraction [Volume 11, Issue 2, 2024, Pages 295-308]
  • Specimens and fixtures used for fracture tests A Review of Research Outcomes on Fabrication Methods and Investigations for Evaluating Fracture Behavior of Aluminum Metal Matrix Composites with its Applications [Volume 8, Issue 2, 2021, Pages 347-358]
  • Spherical Cap Design and Experimental/Numerical Analysis of Metal-Composite Vessel with Spherical Cap under Internal Pressure [Volume 10, Issue 2, 2023, Pages 247-256]
  • Spherical panel Buckling Analysis of Spherical Composite Panels Reinforced by Carbon Nanotube [Volume 2, Issue 2, 2015, Pages 135-144]
  • Spline RBF Initial Buckling Behavior of Elastically Supported Rectangular FGM Plate based on Higher Order Shear Deformation Theory via Spline RBF Method [Volume 11, Issue 1, 2024, Pages 59-72]
  • Springback Springback Prediction of Sandwich Panel Using Machine Learning Methods [Volume 10, Issue 1, 2023, Pages 11-20]
  • Square Using the Taguchi Method for Experimental and Numerical Investigations on the Square-Cup Deep-Drawing Process for Aluminum/Steel Laminated Sheets [Volume 4, Issue 2, 2017, Pages 169-177]
  • Stability analysis Propagation Behavior of Love-Type Waves in a Poro-elastic Medium using Staggered Grid Finite Difference Scheme [Volume 8, Issue 2, 2021, Pages 359-365]
  • Stacking Experimental and Numerical Analysis of Woven Bamboo and Jute Fiber Reinforced in Epoxy Composites [Volume 11, Issue 1, 2024, Pages 103-118]
  • Stacking sequence Optimization of Hybrid Composite Laminate Based on the Frequency using Imperialist Competitive Algorithm [Volume 1, Issue 1, 2014, Pages 37-48]
  • Stacking sequence Free Vibration Analysis of Graphene Reinforced Laminated Composite Plates using Experimental Modal Testing [Volume 10, Issue 2, 2023, Pages 363-374]
  • Static Elasticity Solution of Functionally Graded Carbon Nanotube Reinforced Composite Cylindrical Panel [Volume 1, Issue 1, 2014, Pages 49-60]
  • Static Static and Free Vibration Analyses of Functionally Graded Nano-composite Plates Reinforced by Wavy Carbon Nanotubes Resting on a Pasternak Elastic Foundation [Volume 3, Issue 2, 2016, Pages 123-135]
  • Static analysis Nonlinear Bending Behavior of Functionally Graded Plates Combined with Active Fiber Composites under Thermal Environment [Volume 8, Issue 2, 2021, Pages 299-308]
  • Static analysis Functionally Graded Piezoelectric Plates in Cylindrical Bending by Semi-analytical Approach [Volume 9, Issue 2, 2022, Pages 409-424]
  • Static responses Comparison of Deflection in Two-Directional Functionally Graded Tapered Beam [Volume 11, Issue 1, 2024, Pages 191-202]
  • Steel beam Investigation of Nonlinear Behavior of Composite Bracing Structures with Concrete Columns and Steel Beams (RCS) Applying Finite Element Method [Volume 7, Issue 1, 2020, Pages 25-37]
  • Steel/composite joined tubes Dynamic Characteristics of Joined Steel and Carbon Fiber-Reinforced Plastic Tubes: Experimental and Numerical Investigation [Volume 4, Issue 2, 2017, Pages 88-97]
  • Steel Fibers Multifunctional Properties of Metal Fibers Reinforced Polymer Composites – A Review [Volume 11, Issue 1, 2024, Pages 217-230]
  • Steel nanoparticles Microstructure, Mechanical and Electrical Properties of Copper Matrix Composites Reinforced with Steel Nanoparticles [Volume 8, Issue 2, 2021, Pages 335-345]
  • Steel Short Column Effects of Horizontal Deficiency Location on the Structural Behaviors of Steel SHS Short Columns Strengthened using CFRP [Volume 7, Issue 1, 2020, Pages 39-47]
  • Stehfest Method Generalized Thermoelastic Interactions Using an Eigenvalue Technique in a Transversely Isotropic Unbounded Medium with Memory Having a Line Heat Source [Volume 11, Issue 2, 2024, Pages 413-424]
  • Stiffened composite cylindrically shell The Effect of External Skin on Buckling Strength of Composite Lattice Cylinders Based on Numerical and Experimental Analysis [Volume 3, Issue 2, 2016, Pages 83-87]
  • Stiffener Maximization of Fundamental Frequency of Composite Stiffened Hypar Shell with Cutout by Taguchi Method [Volume 10, Issue 1, 2023, Pages 43-54]
  • Stir casting Technique Microstructure & Mechanical Properties Evaluation of Al6082 /AlSi10Mg Composite for Light Weight Structural Applications [Volume 11, Issue 2, 2024, Pages 309-320]
  • Stochastic modeling Predicting Young’s Modulus of Aggregated Carbon Nanotube Reinforced Polymer [Volume 1, Issue 1, 2014, Pages 9-16]
  • Strain energy release rate Propagation of Matrix Cracking and Induced Delaminatin in Cross-Ply Composite Beams Subjected to Bending Loads [Volume 6, Issue 1, 2019, Pages 45-50]
  • Strength Investigation of Tensile Characteristics of an Epoxy Matrix Com-posite with Uni-Directional and Hybrid Tissue Natural Hemp Fibers [Volume 6, Issue 2, 2019, Pages 181-190]
  • Strengthening Effects of Horizontal Deficiency Location on the Structural Behaviors of Steel SHS Short Columns Strengthened using CFRP [Volume 7, Issue 1, 2020, Pages 39-47]
  • Stress analysis Stress Analysis of FGM Rotating Disk Subjected to Mechanical and Thermal Loads In Aircraft Gas Turbine Engine [Volume 7, Issue 1, 2020, Pages 1-13]
  • Stress wave propagation Finite Difference Analysis of 2D Stress Wave Propagation in Two Dimensional Functionally Graded Ceramics-Metals Composites [Volume 8, Issue 2, 2021, Pages 321-334]
  • Sub-frame Simulation and Optimization of Fatigue Life of Carbon-Epoxy Composite Sub Frame [Volume 9, Issue 1, 2022, Pages 37-47]
  • Sub/super harmonic Size-Dependent Nonlinear Dynamics of a Non-Uniform Piezoelectric Microbeam Based on the Strain Gradient Theory [Volume 7, Issue 2, 2020, Pages 321-331]
  • Surface Degradation Open-Hole Size and Thermal Cycling Effects on Mass Loss and Surface Degradation of Polymer Matrix Composites [Volume 4, Issue 2, 2017, Pages 111-116]
  • Surface elasticity theory Nonlinear Torsional Vibration of Size-Dependent Functionally Graded Rods [Volume 11, Issue 1, 2024, Pages 41-58]
  • Surface energy Nonlocal Analysis of Longitudinal Dynamic Behavior of Nanobars with Surface Energy Effect [Volume 6, Issue 2, 2019, Pages 147-158]
  • Surface energy Nonlinear Torsional Vibration Analysis of Nanorods in the Presence of Surface Energy Effect: Multi-Mode Galerkin Method [Volume 9, Issue 2, 2022, Pages 229-242]
  • Surface functionalization Flexural Behavior of Fiber–Metal Laminates Reinforced with Surface-Functionalized Nanoclay [Volume 5, Issue 2, 2018, Pages 149-156]
  • Surface Modification Experimental and Finite Element Studies on Free Vibration of Areca Leaf Sheath Reinforced Polymer Composites [Volume 8, Issue 2, 2021, Pages 367-388]
  • Surface morphology Polyester/Kota Stone Dust Composite: A Comprehensive Investigation of Mechanical and Sliding Wear Properties [Volume 11, Issue 2, 2024, Pages 375-384]
  • Surface roughness Experimental Study on Surface Roughness and Cutting Force in Turning of Al7032 Reinforced with SiC Using Taguchi Design [Volume 8, Issue 1, 2021, Pages 69-76]
  • Surface roughness Effect of Chilling & B4C content on Machining Efficiency and Surface Quality in Wire-Cut Machining of Aluminum Matrix Chilled Composites [Volume 11, Issue 2, 2024, Pages 341-350]
  • Sustainability Influence of Graphene Powder on the Physio-Mechanical Properties of Jute Reinforced Epoxy Composites for Automobile Applications [Volume 11, Issue 1, 2024, Pages 239-248]
  • Sustainable composite Thermo-Mechanical Characterization of Jute-Bamboo Hybrid Thermoplastic Polymer Matrix Composites with Different Stacking Sequences for Automobile Applications [Volume 10, Issue 2, 2023, Pages 375-382]
  • Sustainable composite Development and Mechanical Characterization of Light Weight Fiber Metal Laminate using Jute, Kenaf and Aluminium [Volume 11, Issue 2, 2024, Pages 259-270]
  • SWCNT Flexural Behaviour of Nanocomposite Plate with CNT Distribution and Agglomeration Effect [Volume 10, Issue 1, 2023, Pages 123-136]

T

  • Taguchi Using the Taguchi Method for Experimental and Numerical Investigations on the Square-Cup Deep-Drawing Process for Aluminum/Steel Laminated Sheets [Volume 4, Issue 2, 2017, Pages 169-177]
  • Taguchi Experimental Study on Surface Roughness and Cutting Force in Turning of Al7032 Reinforced with SiC Using Taguchi Design [Volume 8, Issue 1, 2021, Pages 69-76]
  • Taguchi Statistical Approach of Determining the Effect of Cenosphere on the Tribological Behaviour of Jute Reinforced Polymer Based Composite [Volume 10, Issue 1, 2023, Pages 211-220]
  • Taguchi method Maximization of Fundamental Frequency of Composite Stiffened Hypar Shell with Cutout by Taguchi Method [Volume 10, Issue 1, 2023, Pages 43-54]
  • Taguchi method Polyester/Kota Stone Dust Composite: A Comprehensive Investigation of Mechanical and Sliding Wear Properties [Volume 11, Issue 2, 2024, Pages 375-384]
  • Tapered I-beam A Novel Approach for Lateral Buckling Assessment of Double Tapered Thin-Walled Laminated Composite I-Beams [Volume 9, Issue 1, 2022, Pages 11-23]
  • Taro starch Physical and Mechanical Properties of Biodegradable Film from Taro Starch (Xanthosoma Sagittifolium) and Duck Bone Gelatin [Volume 9, Issue 2, 2022, Pages 213-220]
  • Temperature Failure Pressure Prediction of Semi Spherical GFRP Shells in Thermal Environment [Volume 7, Issue 1, 2020, Pages 103-108]
  • Temperature Influence of Hygrothermal Environment and FG Material on Natural Frequency and Parametric Instability of Plates [Volume 7, Issue 1, 2020, Pages 89-101]
  • Temperature dependent materials The Effect of Temperature Dependency on the Thermo-Electro-Elastic Analysis of Functionally Graded Piezoelectric Spherical Shell [Volume 6, Issue 1, 2019, Pages 1-8]
  • Temperature-dependent properties Influence of Electromagnetic Generalized Thermoelasticity Interactions with Nonlocal Effects under Temperature-Dependent Properties in a Solid Cylinder [Volume 10, Issue 1, 2023, Pages 157-166]
  • Tensile Experimental and Numerical Analysis of Woven Bamboo and Jute Fiber Reinforced in Epoxy Composites [Volume 11, Issue 1, 2024, Pages 103-118]
  • Tensile-compressive effects A Novel Method for Considering Interlayer Effects between Graphene Nanoribbons and Elastic Medium in Free Vibration Analysis [Volume 7, Issue 1, 2020, Pages 79-88]
  • Tensile properties Accelerated Heat Aging Study of Phenolic/Basalt Fiber Reinforced Composites [Volume 3, Issue 1, 2016, Pages 1-7]
  • Tensile properties A Study of the Effect of TPU and Clay Nanoparticles on the Mechanical Behavior of PBT-Based Nanocomposites [Volume 4, Issue 3, 2017, Pages 179-186]
  • Tensile properties Numerical Simulation of a Hybrid Nanocomposite Containing Ca-CO3 and Short Glass Fibers Subjected to Tensile Loading [Volume 4, Issue 2, 2017, Pages 117-125]
  • Tensile test Mechanical and Physical Properties of Glass-Fiber Reinforced Polymer Rods Manufactured by Different Pultrusion Methods [Volume 8, Issue 1, 2021, Pages 99-107]
  • The extended mixture rule approach Biaxial Buckling and Bending of Smart Nanocomposite Plate Reinforced by CNTs using Extended Mixture Rule Approach [Volume 1, Issue 1, 2014, Pages 17-26]
  • Thermal buckling Thermal Buckling and Thermal Induced free Vibration Analysis of Perforated Composite Plates: a Mathematical Model [Volume 7, Issue 1, 2020, Pages 15-23]
  • Thermal buckling Numerical Analysis of Thermal Buckling of Honeycomb Core Sandwich Panel under Thermal Loading [Volume 10, Issue 2, 2023, Pages 333-342]
  • Thermal conductivity The Effect of Temperature Dependency on the Thermo-Electro-Elastic Analysis of Functionally Graded Piezoelectric Spherical Shell [Volume 6, Issue 1, 2019, Pages 1-8]
  • Thermal conductivity 3D Numerical Simulation of Fibers Arrangement Effects On Thermal Conductivity of Polymer Matrix Composite [Volume 9, Issue 1, 2022, Pages 59-73]
  • Ther-malCycling Open-Hole Size and Thermal Cycling Effects on Mass Loss and Surface Degradation of Polymer Matrix Composites [Volume 4, Issue 2, 2017, Pages 111-116]
  • Thermal fatigue Investigation of Thermal Fatigue Behavior for HDPE Composites Reinforced by Nano Alumina [Volume 11, Issue 2, 2024, Pages 335-340]
  • Thermal gradient Buckling Analysis of Functionally Graded Cylindrical Shells Under Mechanical and Thermal Loads by Dynamic Relaxation Method [Volume 7, Issue 2, 2020, Pages 297-311]
  • Thermal insulation Synthesis and Characterization Al2O3/Novolac/Fiberglass Nanocomposite: Modification of Thermal Stability and Thermal Insulation Properties [Volume 10, Issue 1, 2023, Pages 21-28]
  • Thermal insulation Preparation, Identification, and Evaluation of the Thermal Properties of Novolac Resins Modified with TiO2, MgO, and V2O5 Oxides [Volume 11, Issue 1, 2024, Pages 1-9]
  • Thermal insulation Evaluation of Heat Resistance Characteristics of Fibrous Material for Cold Weather Application [Volume 11, Issue 1, 2024, Pages 231-238]
  • Thermal post-buckling analaysis Numerical Investigation on Thermal Post-buckling Of Annular Sector Plates Made of FGM Via 3D Finite Element Method [Volume 8, Issue 2, 2021, Pages 309-320]
  • Thermal properties Effect of the Nature of Oxide Nanofillers on Changes in the Mechanical Properties of Epoxy Coatings under Thermal Cycling [Volume 10, Issue 1, 2023, Pages 195-204]
  • Thermal stability Synthesis and Characterization Al2O3/Novolac/Fiberglass Nanocomposite: Modification of Thermal Stability and Thermal Insulation Properties [Volume 10, Issue 1, 2023, Pages 21-28]
  • Thermal Stress Transient Thermal Stresses Analysis in a FPGM Cylinder [Volume 6, Issue 2, 2019, Pages 81-94]
  • Thermal Stress Stress Analysis of the Rotating Carbon-Carbon Composite Disk of an Axial Compressor [Volume 10, Issue 2, 2023, Pages 271-282]
  • Thermal variation Thermal Variations of Thermo-Mechanical Loading Effects on Creep Stress and Strain Distribution in Multi-layered Composite Cylinder [Volume 9, Issue 1, 2022, Pages 115-123]
  • Thermoelastic Analysis Thermoelastic Analysis of Compressor Spool in Turbojet Engine and Redesign it Using Functionally Graded Materials with Opti-mal Coefficients [Volume 6, Issue 2, 2019, Pages 167-179]
  • Thermoelastic Bending An Analytical Approach to Thermoelastic Bending of Simply Supported Advanced Ribbed Composite Plates [Volume 5, Issue 2, 2018, Pages 173-185]
  • Thermoelasticity Assessment of Hydrostatic Stress and Thermo Piezoelectricity in a Laminated Multilayered Rotating Hollow Cylinder [Volume 8, Issue 1, 2021, Pages 77-86]
  • Thermoelastic response A Case Study on the Influence of Friction Coefficient and Rotational Speed on Transient Thermoelastic Response of FGM Rotating Cylinder [Volume 9, Issue 2, 2022, Pages 399-408]
  • Thermo-magneto-mechanical loading Effects of Magnetic Field in Creep Behavior of Three-Phase Laminated Composite Cylindrical Shells [Volume 6, Issue 1, 2019, Pages 51-56]
  • Thermo-mechanical characterization Thermo-Mechanical Characterization of Jute-Bamboo Hybrid Thermoplastic Polymer Matrix Composites with Different Stacking Sequences for Automobile Applications [Volume 10, Issue 2, 2023, Pages 375-382]
  • Thermo-mechanical load An Investigation of Stress and Deformation Behavior of Functionally Graded Timoshenko Beams subjected to Thermo-Mechanical Load [Volume 7, Issue 1, 2020, Pages 157-176]
  • Thermomechanical Properties Experimental Study on Amine-Functionalized Carbon Nanotubes’ Effect on the Thermomechanical Properties of CNT/Epoxy Nano-composites [Volume 5, Issue 1, 2018, Pages 41-48]
  • Thevetia Ash powder Characterization of Thevetia Peruviana (Yellow Oleander) Shell Ash Powder as a Possible Filler in Polymer Composites [Volume 8, Issue 1, 2021, Pages 109-117]
  • Thick cylindrical structure Elastoplastic Analysis of Pressurized FG rotating Thick Cylinders Based on High-Order Shear Deformation Theory and Radial Return Method [Volume 11, Issue 1, 2024, Pages 119-130]
  • Thickness ratio Free Vibration Analysis of Simply Supported and Clamped Functionally Graded Rectangular Plate Using Coupled Displacement Field Method [(Articles in Press)]
  • Thick-walled cylinder Elastic analysis of Shrink-fitted Thick FGM Cylinders Based on Linear Plane Elasticity Theory [Volume 7, Issue 1, 2020, Pages 121-127]
  • Thin film coatings Atomic Simulation of Temperature Effect on the Mechanical Properties of Thin Films [Volume 2, Issue 1, 2015, Pages 31-38]
  • Thin-walled tube Numerical Crashworthiness Analysis of Graded Layered Foam- Filled Tubes Under Axial Loading [Volume 6, Issue 1, 2019, Pages 57-64]
  • Third order shear deformation theory Dynamic Stability of Moderately Thick Composite Laminated Skew Plates using Finite Strip Method [Volume 2, Issue 2, 2015, Pages 145-150]
  • Three-dimensional free vibration A Semi-analytical Solution for 3-D Dynamic Analysis of Thick Continuously Graded Carbon Nanotube-reinforced Annular Plates Resting on a Two-parameter Elastic Foundation [Volume 1, Issue 2, 2014, Pages 113-130]
  • Three-layer cylindrical shell Investigation of Free Vibration in Fluid-Loaded Cylindrical Shells with a Three-Layer Sandwich Wall and an Auxetic Central Layer [(Articles in Press)]
  • Three-phase composite cylinder Effects of Magnetic Field in Creep Behavior of Three-Phase Laminated Composite Cylindrical Shells [Volume 6, Issue 1, 2019, Pages 51-56]
  • Three-point bending Experimental and Numerical Investigation of Reinforcement Sheet Effect on the Bending Strength of Corrugated Composite Panels [Volume 8, Issue 1, 2021, Pages 1-13]
  • Three-point bending Experimental and Numerical Investigation of the Effect of Embedding Steel Wires inside the Foam of GFRP/Foam Sandwich Panel under Three-Point Bending Load [Volume 11, Issue 2, 2024, Pages 271-280]
  • Three-point bending test Flexural Behavior of Fiber–Metal Laminates Reinforced with Surface-Functionalized Nanoclay [Volume 5, Issue 2, 2018, Pages 149-156]
  • Three-point bending test Delamination Analysis in Composite Root of a Carbon-Layer Reinforced Wind Turbine Blade [Volume 6, Issue 1, 2019, Pages 9-18]
  • Three-point bending test Experimental and Numerical Investigation on the Flexural Behavior of Composite-Reinforced Top-Hat Shape Beam [Volume 8, Issue 1, 2021, Pages 149-156]
  • Ti3SiC2 The Effect of Al Additive and Arc Melting Time on Synthesis of Ti3SiC2 MAX Phase using Ti/SiC/Al/Graphite [Volume 9, Issue 2, 2022, Pages 367-376]
  • Tibia bovine bone Study of High-cycle Fatigue Properties in Bovine Tibia Bones based on Reliability and Scatter-band Predictions [Volume 7, Issue 2, 2020, Pages 255-261]
  • Timoshenko Transverse Vibration for Non-uniform Timoshenko Nano-beams [Volume 2, Issue 1, 2015, Pages 1-16]
  • Timoshenko beam Finite Element Modeling for Buckling Analysis of Tapered Axially Functionally Graded Timoshenko Beam on Elastic Foundation [Volume 7, Issue 2, 2020, Pages 203-218]
  • Timoshenko beams An Investigation of Stress and Deformation Behavior of Functionally Graded Timoshenko Beams subjected to Thermo-Mechanical Load [Volume 7, Issue 1, 2020, Pages 157-176]
  • Timoshenko nano-beam Nonlocal Buckling and Vibration Analysis of Triple-Walled ZnO Piezoelectric Timoshenko Nano-beam Subjected to Magneto-Electro-Thermo-Mechanical Loadings [Volume 2, Issue 2, 2015, Pages 113-126]
  • TiO2/CuO Production and Investigation of Natural Zeolite-TiO2/CuO Nanoparticles Composite [Volume 10, Issue 1, 2023, Pages 205-210]
  • Titanium Dioxide Preparation, Identification, and Evaluation of the Thermal Properties of Novolac Resins Modified with TiO2, MgO, and V2O5 Oxides [Volume 11, Issue 1, 2024, Pages 1-9]
  • Titanium/Hydroxyapatite Experimental Investigation of FGM Dental Implant Properties Made from Ti/HA Composite [Volume 4, Issue 3, 2017, Pages 233-237]
  • Top-hat section beam Experimental and Numerical Investigation on the Flexural Behavior of Composite-Reinforced Top-Hat Shape Beam [Volume 8, Issue 1, 2021, Pages 149-156]
  • Torsional Buckling Buckling analysis of FML cylindrical shells under combined axial and torsional loading [Volume 7, Issue 2, 2020, Pages 263-270]
  • Torsional vibration Nonlinear Torsional Vibration of Size-Dependent Functionally Graded Rods [Volume 11, Issue 1, 2024, Pages 41-58]
  • Transient Transient Thermal Stresses Analysis in a FPGM Cylinder [Volume 6, Issue 2, 2019, Pages 81-94]
  • Transient dynamic Semi Analytical Transient Dynamic Analysis of Composite Adhesive Single-lap Joints [Volume 7, Issue 1, 2020, Pages 137-145]
  • Transient hygrothermal Transient Solution of Heat and Moisture Transfer in a Functionally Graded Hollow Cylinder with Finite Length [Volume 9, Issue 1, 2022, Pages 49-57]
  • Transversely isotropic material Elasto-Thermodiffusive Response in a Two-Dimensional Transversely Isotropic Medium [Volume 6, Issue 2, 2019, Pages 95-104]
  • Trapezoidal shape factor A New Three-Dimensional Refined Higher-Order Theory for Free Vibration Analysis of Composite Circular Cylindrical Shells [Volume 6, Issue 2, 2019, Pages 201-223]
  • Trigonometric Ritz method Free Vibration Analysis of Composite Plates with Artificial Springs by Trigonometric Ritz Method [Volume 1, Issue 1, 2014, Pages 61-70]
  • Trigonometric shear deformation theory Static Flexure of Soft Core Sandwich Beams using Trigonometric Shear Deformation Theory [Volume 2, Issue 1, 2015, Pages 45-53]
  • Trigonometric shear deformation theory Precision Closed-form Solution for Out-of-plane Vibration of Rectangular Plates via Trigonometric Shear Deformation Theory [Volume 3, Issue 1, 2016, Pages 31-43]
  • Triple-walled ZnO piezoelectric Nonlocal Buckling and Vibration Analysis of Triple-Walled ZnO Piezoelectric Timoshenko Nano-beam Subjected to Magneto-Electro-Thermo-Mechanical Loadings [Volume 2, Issue 2, 2015, Pages 113-126]
  • Tsai-Wu failure Finite Element Analysis of Mechanical Properties of Basalt-Carbon Epoxy Hybrid Laminates [Volume 9, Issue 2, 2022, Pages 263-274]
  • Tsai-Wu Failure criteria Material Mechanical Properties Prediction of Layer with Multidirectional Fiber Ply Reinforced Polymer Matrix Composites [Volume 9, Issue 2, 2022, Pages 221-227]
  • TSS method Microwave-Assisted Two-Step Sintering of Al/8wt%TiC Composite Prepared by Powder Metallurgy [Volume 8, Issue 2, 2021, Pages 291-298]
  • Turbojet Engine Thermoelastic Analysis of Compressor Spool in Turbojet Engine and Redesign it Using Functionally Graded Materials with Opti-mal Coefficients [Volume 6, Issue 2, 2019, Pages 167-179]
  • Two-Dimensional Functionally Graded Taper Beam Comparison of Deflection in Two-Directional Functionally Graded Tapered Beam [Volume 11, Issue 1, 2024, Pages 191-202]
  • Two-parameter elastic foundations A Semi-analytical Solution for 3-D Dynamic Analysis of Thick Continuously Graded Carbon Nanotube-reinforced Annular Plates Resting on a Two-parameter Elastic Foundation [Volume 1, Issue 2, 2014, Pages 113-130]
  • Two-parameter micromechanical model of agglomeration Three-dimensional elasticity solution for vibrational analysis of thick continuously graded sandwich plates with different boundary conditions using a two-parameter micromechanical model for agglomeration [Volume 5, Issue 1, 2018, Pages 49-66]
  • Two-Phase Elasticity Longitudinal Vibration of Nanobeams by Two-Phase Local/Nonlocal Elasticity, Rayleigh Theory, and Generalized Differential Quadrature Method [Volume 10, Issue 2, 2023, Pages 221-232]

U

  • Ultra-High-Performance concrete Experimental Investigating to Increases the Fire Resistance of the Ultra-High-Performance Concrete by using Hybrid Fibers [Volume 9, Issue 2, 2022, Pages 377-386]
  • Ultrasonic Ultrasonic Assisted Drilling of Carbon Fiber Reinforced Plastic Composites with Non-Rotating Vibratory Tool [Volume 9, Issue 1, 2022, Pages 147-154]
  • Ultrasonic test Numerical Optimization of Non-destructive Ultrasonic Testing in Identifying Defects in Composite Structure of Pine Tree Trunk [Volume 11, Issue 1, 2024, Pages 249-258]
  • Unconfined compressive strength Engineering Behavior of Municipal Solid Waste Incinerated Ash with Compressible Soil: An Approach Towards the Waste Utilization & Stabilization of Compressible Soil [(Articles in Press)]
  • Unified formulation An Investigation of Stress and Deformation Behavior of Functionally Graded Timoshenko Beams subjected to Thermo-Mechanical Load [Volume 7, Issue 1, 2020, Pages 157-176]
  • Unifrmally distributed load Geometrically Nonlinear Analysis of Laminated Composite Plates subjected to Uniform Distributed Load Using a New Hypothesis: the finite element method (FEM) Approach [Volume 7, Issue 2, 2020, Pages 271-285]
  • Unit cell Distribution of Residual Stresses in Polymer Reinforced Carbon Nanotubes and Laminated Carbon Fibers [Volume 4, Issue 1, 2017, Pages 9-18]
  • Unit cell Propagation of Matrix Cracking and Induced Delaminatin in Cross-Ply Composite Beams Subjected to Bending Loads [Volume 6, Issue 1, 2019, Pages 45-50]

V

  • Vacuum-assisted resin transfer molding Capillary Effects on Surface Enhancement in a Non-Homogeneous Fibrous Porous Medium [Volume 5, Issue 1, 2018, Pages 83-90]
  • Vanadium pentoxide Preparation, Identification, and Evaluation of the Thermal Properties of Novolac Resins Modified with TiO2, MgO, and V2O5 Oxides [Volume 11, Issue 1, 2024, Pages 1-9]
  • Vector-Matrix Differential Equation Generalized Thermoelastic Interactions Using an Eigenvalue Technique in a Transversely Isotropic Unbounded Medium with Memory Having a Line Heat Source [Volume 11, Issue 2, 2024, Pages 413-424]
  • Vibration absorber Adaptive Tunable Vibration Absorber using Shape Memory Alloy [Volume 2, Issue 1, 2015, Pages 55-60]
  • Vibration behavior of Timoshenko microbeam Size-dependent Effects on the Vibration Behavior of a Ti-moshenko Microbeam subjected to Pre-stress Loading based on DQM [Volume 3, Issue 2, 2016, Pages 99-112]
  • VIKOR Feasibility Study On Application Of Various MADM Approaches For Selection Of Kenaf/Saw Dust Composite [(Articles in Press)]
  • Viscoelastic creep Thermal Variations of Thermo-Mechanical Loading Effects on Creep Stress and Strain Distribution in Multi-layered Composite Cylinder [Volume 9, Issue 1, 2022, Pages 115-123]
  • Viscoelasticity Low-velocity Impact Response of Viscoelastic Composite Laminates Considering Large Deflection and Higher-order Shear Deformation [Volume 8, Issue 2, 2021, Pages 425-434]
  • Volatile Organic compounds Green Anticorrosion Coating with Low VOCs Emission using Moringa Oleifera Leaves Extract [Volume 9, Issue 1, 2022, Pages 163-171]
  • Von-Kármán type nonlinearity Nonlinear Torsional Vibration of Size-Dependent Functionally Graded Rods [Volume 11, Issue 1, 2024, Pages 41-58]

W

  • Wastes Mechanical, Crystallographic, and Microstructural Analysis of Polymer Composites Developed from Iron Filings and Polystyrene Wastes [Volume 9, Issue 1, 2022, Pages 137-145]
  • Wavelet Transform Damage Detection in Concrete Filled Tube Columns Based on Experimental Modal Data and Wavelet Technique [Volume 7, Issue 2, 2020, Pages 245-254]
  • Wave propagation Mesh-free Dynamic Analyses of FGM Sandwich Plates Resting on A Pasternak Elastic Foundation [Volume 4, Issue 2, 2017, Pages 153-168]
  • Wavy carbon nanotube Static and Free Vibration Analyses of Functionally Graded Nano-composite Plates Reinforced by Wavy Carbon Nanotubes Resting on a Pasternak Elastic Foundation [Volume 3, Issue 2, 2016, Pages 123-135]
  • Wear A Comparative Study on the Microstructure and Mechanical Properties of Al-Si-Cu/1wt %NCP Composites after T6 Heat Treatment [Volume 7, Issue 1, 2020, Pages 129-136]
  • Wear Mechanical and Tribological Behaviors of Chopped Carbon/Glass Fiber Reinforced Hybrid Epoxy Composites [Volume 9, Issue 2, 2022, Pages 349-358]
  • Wear Optimization of Wear Behaviour on Mg-TiO2 Nanocomposite Using Taguchi Grey Relational Analysis [Volume 10, Issue 1, 2023, Pages 151-156]
  • Wear Statistical Approach of Determining the Effect of Cenosphere on the Tribological Behaviour of Jute Reinforced Polymer Based Composite [Volume 10, Issue 1, 2023, Pages 211-220]
  • Wear Behavior Sintered Steel Composites Reinforced with Ceramic Nanoparticles: Fabrication, Characteristics and Wear Behavior [Volume 6, Issue 2, 2019, Pages 191-200]
  • Wear Resistance Deposition of an Al/SiC Composite Coating on Steel by Friction Surfacing: Corrosion and Wear Properties [Volume 9, Issue 2, 2022, Pages 287-296]
  • Weighted Sum The Effect of Different Weighting Ratios, Length, and Thickness on Weighted Sum of the First Natural Frequency and Critical Buckling Load for a Laminated Composite Circular Cylindrical Shell [Volume 8, Issue 1, 2021, Pages 87-98]
  • Wentzel-Kramers-Brillouin asymptotic approach Propagation of shear horizontal wave at magneto-electro-elastic structure subjected to mechanically imperfect interface [(Articles in Press)]
  • Wire EDM Effect of Chilling & B4C content on Machining Efficiency and Surface Quality in Wire-Cut Machining of Aluminum Matrix Chilled Composites [Volume 11, Issue 2, 2024, Pages 341-350]
  • Wire EDM Optimization of AA6351-SiC-B4C Hybrid Composites in Wire EDM Using Grey Relation Technique [Volume 11, Issue 2, 2024, Pages 385-400]
  • Withstanding Properties Geometric Effects on Nanopore Creation in Graphene and on the Impact-withstanding Efficiency of Graphene Nanosheets [Volume 5, Issue 1, 2018, Pages 91-102]
  • Worn Morphology Mechanical Characterization and Wear Behavior of Nano TiO2 Particulates Reinforced Al7075 Alloy Composites [Volume 7, Issue 1, 2020, Pages 71-78]

X

  • X-ray diffraction Engineering Behavior of Municipal Solid Waste Incinerated Ash with Compressible Soil: An Approach Towards the Waste Utilization & Stabilization of Compressible Soil [(Articles in Press)]
  • XRD analysis Microstructure & Mechanical Properties Evaluation of Al6082 /AlSi10Mg Composite for Light Weight Structural Applications [Volume 11, Issue 2, 2024, Pages 309-320]

Y

  • Young's Modulus Effect of Curvature on the Mechanical Properties of Graphene: A Density Functional Tight-binding Approach [Volume 3, Issue 1, 2016, Pages 9-13]

Z

  • Zeolite Improving the Performance of Porous Concrete Composites Using Zeolite as a Coarse Grain [Volume 5, Issue 2, 2018, Pages 157-163]
  • Zeolite/TiO2/CuO Production and Investigation of Natural Zeolite-TiO2/CuO Nanoparticles Composite [Volume 10, Issue 1, 2023, Pages 205-210]
  • Zigzag theory Buckling Analysis of Functionally Graded Sandwich Beam Based on Third-Order Zigzag Theory [Volume 10, Issue 1, 2023, Pages 55-68]