Aamir, Muhammad Talha Experimental Investigation and Simulation of Electro-Mechanical Behaviour of Hybrid Sandwich Composite Radomes for Aerospace Applications [Volume 11, Issue 2, 2024, Pages 401-412]
Abbasi, M. An Analytical Study on Effects of adding Nanoparticles to Water and Enhancement in Thermal Properties Based on Falkner-Skan Model [Volume 1, Issue 1, 2014, Pages 27-35]
Abboub, Amar Experimental and Numerical Analyses of Alfa/Polyester Composite Under Three-Point Bending [Volume 12, Issue 1, 2025, Pages 211-222]
Abdi, Hamid Parametric Investigation of Particle Movements in Ultrasonic Levitation Process Using Piezoelectric Materials [Volume 13, Issue 2, 2026, Pages 357-369]
Abdollahi, A. Reduction of Biaxial Bending and Torsion in Ionic Polymer-Metal Actuators through Symmetric Voltage Distribution and Improved Boundary Conditions [(Articles in Press)]
Abdollahi, Amir Experimental Investigation of Residual Stress Measurement on Cold Roll Bonded Al/Cu Composite by Incremental Hole-Drilling Method [Volume 13, Issue 1, 2026, Pages 1-11]
Abdollahpour, Hasan Microwave-Assisted Two-Step Sintering of Al/8wt%TiC Composite Prepared by Powder Metallurgy [Volume 8, Issue 2, 2021, Pages 291-298]
Abdollahzadeh, Pouya On the Nonlinear Dynamics of an Energy Harvesting Device Based on Magnetostriction [Volume 8, Issue 1, 2021, Pages 33-40]
Abdoos, Hassan On the Study of Mechanical Properties of Aluminum/Nano-Alumina Composites Produced via Powder Injection Molding [Volume 3, Issue 1, 2016, Pages 45-51]
Abdulkareem, M. T.Mechanical, Crystallographic, and Microstructural Analysis of Polymer Composites Developed from Iron Filings and Polystyrene Wastes [Volume 9, Issue 1, 2022, Pages 137-145]
Abdulkareem, S. A.Mechanical, Crystallographic, and Microstructural Analysis of Polymer Composites Developed from Iron Filings and Polystyrene Wastes [Volume 9, Issue 1, 2022, Pages 137-145]
Abdullah, Orhan SabahInvestigation of Thermal Fatigue Behavior for HDPE Composites Reinforced by Nano Alumina [Volume 11, Issue 2, 2024, Pages 335-340]
Abdullah, Orhan Sabah Investigation of Mechanical Properties for Blend Epoxy-Polysulfide Reinforced with Woven Carbon and Glass Fiber [Volume 13, Issue 1, 2026, Pages 185-195]
Abdul Razzaq, Hayder Abdul HadiImpact and Blast Resistance Enhancement of Reinforced Concrete Slabs Strengthened with CFRP and GFRP Systems: Experimental and Numerical Investigation [(Articles in Press)]
Abed, Akram MahdeStructural Analysis of Composite Material Disk Brakes [(Articles in Press)]
Abedini, Vahid Experimental Study on Surface Roughness and Cutting Force in Turning of Al7032 Reinforced with SiC Using Taguchi Design [Volume 8, Issue 1, 2021, Pages 69-76]
Abedini, Vahid Tensile and Flexural Properties of 3D-Printed Polylactic Acid/Continuous Carbon Fiber Composite [Volume 10, Issue 2, 2023, Pages 407-418]
Abedini, Vahid Effects of Cooling Conditions and Machining Parameters on Thrust Force, Surface Roughness, and Hole Quality in Machining of Fiber Metal Laminates [Volume 12, Issue 3, 2025, Pages 671-683]
Achyuth, Penda Enhancement of Mechanical Properties of Coir, Kapok, and Hemp Fiber-Reinforced Epoxy Composites for a Variety of Applications [Volume 13, Issue 2, 2026, Pages 271-281]
Adeniyi, A. G.Mechanical, Crystallographic, and Microstructural Analysis of Polymer Composites Developed from Iron Filings and Polystyrene Wastes [Volume 9, Issue 1, 2022, Pages 137-145]
Adeniyi, Adedayo SheriffCharacterization of Thevetia Peruviana (Yellow Oleander) Shell Ash Powder as a Possible Filler in Polymer Composites [Volume 8, Issue 1, 2021, Pages 109-117]
Adeppa, Anand Experimental Study of Woven Glass, Bamboo, and Jute Fibre Reinforced in Epoxy Composites [Volume 14, Issue 1, 2027, Pages 41-56]
Afshari, H. Size-dependent Effects on the Vibration Behavior of a Ti-moshenko Microbeam subjected to Pre-stress Loading based on DQM [Volume 3, Issue 2, 2016, Pages 99-112]
Afshin, Shadi Study on Thermal, Mechanical and Dynamic Properties of Epoxy Matrix with Hybrid of Nanoclay/Carbon Nanotube [Volume 13, Issue 1, 2026, Pages 37-56]
Afzali Alvars, Hamed Interfacial Characteristics of Graphene/Polymer Nanocomposites by Molecular Dynamics Simulation and Evaluating Effects of that on Mechanical Properties of Nanocomposites by FEM [Volume 11, Issue 2, 2024, Pages 321-334]
Aghadavoudi, Farshid Molecular Dynamics Simulation of Functional and Hybrid Epoxy Based Nanocomposites [Volume 7, Issue 2, 2020, Pages 233-243]
Aghajani, F. An Analytical Study on Effects of adding Nanoparticles to Water and Enhancement in Thermal Properties Based on Falkner-Skan Model [Volume 1, Issue 1, 2014, Pages 27-35]
Aghalari, Milad Experimental Investigation and RSM-Based Optimization of Phenolic/PTFE/SiC Composites [Volume 14, Issue 1, 2027, Pages 237-254]
Aghayari, Reza Experimental Investigating to Increases the Fire Resistance of the Ultra-High-Performance Concrete by using Hybrid Fibers [Volume 9, Issue 2, 2022, Pages 377-386]
Ahlawat, Neha Vibration Analysis of FGM Annular Plate with Linearly Varying Thickness for Several Boundary Conditions [Volume 13, Issue 2, 2026, Pages 475-494]
Ahmadi, Hamed Experimental and Numerical Investigation on the Flexural Behavior of Composite-Reinforced Top-Hat Shape Beam [Volume 8, Issue 1, 2021, Pages 149-156]
Ahmadi, Hamed Crashworthiness Study of an Innovative Helmet Liner Composed of an Auxetic Lattice Structure and PU Foam [Volume 9, Issue 1, 2022, Pages 25-35]
Ahmadi, Omid Transient Thermal Stresses Analysis in a FPGM Cylinder [Volume 6, Issue 2, 2019, Pages 81-94]
Ahmadvand, Ahmad An Analytical Study on the Indentation of a Layered Composite Beam and its Utilization in Low Velocity Impact Response [Volume 9, Issue 1, 2022, Pages 155-162]
Ahmed, Mostaid Analysis of Electrically Shorted and Open Cases on Love Waves Propagating in Piezoelectric Layer Embedded over a Fiber-Reinforced Substrate [Volume 12, Issue 1, 2025, Pages 1-12]
Akbari, Tayebeh Asymmetric and Oblique Impact on Perforated Plate and Ceramic–Composite Armor Systems: A numerical Study [(Articles in Press)]
Akbarzadeh, Pooria Homogenisation-Based Analytical–Numerical Modelling of Orthogonal Trapezoidal Corrugated-Core Sandwich Panels [(Articles in Press)]
Akshaya, Anandakrishnan Propagation of Shear Horizontal Wave at Magneto-Electro-Elastic Structure Subjected to Mechanically Imperfect Interface [Volume 12, Issue 1, 2025, Pages 97-114]
Akumalla, Ravi Kiran Active Vibration Control of Laminated Composite Beam Operating in Thermal Environment using PZT-5H Patches [Volume 9, Issue 2, 2022, Pages 387-398]
Alaei, Mohammad Hossein Enhancing Strength of Nomex Sandwich Structures through the Utilization of Nano Clay Dispersed Epoxy Resin: A Study in Aerospace Applications [Volume 12, Issue 3, 2025, Pages 473-482]
Alaei, Mohammad Hossein Machining Behavior of Al-MMC Reinforced with Hybrid Additives: Effects of Cutting Parameters – A Taguchi Approach [Volume 14, Issue 1, 2027, Pages 165-180]
Alalhessabi, S. The Structural and Mechanical Properties of Al-2.5%wt. B4C Met-al Matrix Nano-composite Fabricated by the Mechanical Alloying [Volume 2, Issue 1, 2015, Pages 39-44]
Alamdari, Sanaz Nanocomposite Thin Film of KTP Nanoparticles: Synthesis, Characterization and Optical Applications [Volume 13, Issue 2, 2026, Pages 465-473]
Alavi, Majid High-order Analysis of Linear Vibrations of a ModeratleyThick Sandwich Panel With an Electrorheological Core [Volume 7, Issue 2, 2020, Pages 177-188]
Albooyeh, Alireza Influence of Different Foaming Conditions on the Mechanical, Physical, and Structural Properties of Polypropylene Foam [Volume 6, Issue 2, 2019, Pages 225-237]
Albooyeh, A.R. The Effect of Processing Conditions on the Mechanical Properties of Polypropylene/Mesoporous Silica-Hydroxyapatite Hybrid Nanocomposites [Volume 3, Issue 2, 2016, Pages 73-82]
Alfiyah, S. Physical and Mechanical Properties of Biodegradable Film from Taro Starch (Xanthosoma Sagittifolium) and Duck Bone Gelatin [Volume 9, Issue 2, 2022, Pages 213-220]
Ali, Imran Free Vibration and Buckling Analyses of Nanobeam Embedded in Pasternak Foundation [Volume 10, Issue 2, 2023, Pages 419-436]
Alibeigloo, Akbar Elasticity Solution of Functionally Graded Carbon Nanotube Reinforced Composite Cylindrical Panel [Volume 1, Issue 1, 2014, Pages 49-60]
Alihemmati, Jaber Frequency Analysis of Functionally Graded Carbon Nanotube-reinforced Cylindrical Panels by Mesh-free Galerkin Method [Volume 8, Issue 2, 2021, Pages 415-424]
Alikhani, Hossein Mechanical and Physical Properties of Glass-Fiber Reinforced Polymer Rods Manufactured by Different Pultrusion Methods [Volume 8, Issue 1, 2021, Pages 99-107]
Alimirzaei, Sajad Nonlocal Buckling and Vibration Analysis of Triple-Walled ZnO Piezoelectric Timoshenko Nano-beam Subjected to Magneto-Electro-Thermo-Mechanical Loadings [Volume 2, Issue 2, 2015, Pages 113-126]
Alinejad, Javad 3D Numerical Simulation of Fibers Arrangement Effects On Thermal Conductivity of Polymer Matrix Composite [Volume 9, Issue 1, 2022, Pages 59-73]
Alinezhad, Ahmad Ali Free Vibration Analysis of Size-Dependent Multi-Layered Graphene Sheets Based on Strain Gradient Elasticity Theory [Volume 9, Issue 2, 2022, Pages 275-285]
Alizadeh, Mohsen Health Monitoring for Composite under Low-Cycle Cyclic Loading, Considering Effects of Acoustic Emission Sensor Type [Volume 6, Issue 1, 2019, Pages 19-26]
Alizad-Farzin, Yousef A Case Study for Fabrication of MWCNT-TiO2 Hybrid Reinforced Aluminium Matrix Nanocomposites [Volume 1, Issue 2, 2014, Pages 107-111]
Allaee, Mohammad Hossein Experimental and Numerical Investigation of the Effect of Embedding Steel Wires inside the Foam of GFRP/Foam Sandwich Panel under Three-Point Bending Load [Volume 11, Issue 2, 2024, Pages 271-280]
Al-Maamori, Mohammed Hamza Numerical and Analytical Investigation of Free Vibration Behavior of Porous Functionally Graded Sandwich Plates [Volume 12, Issue 3, 2025, Pages 555-568]
Al-Mwanes, Ammar OudahExperimental Investigating to Increases the Fire Resistance of the Ultra-High-Performance Concrete by using Hybrid Fibers [Volume 9, Issue 2, 2022, Pages 377-386]
Al-Waily, Muhannad Numerical and Analytical Investigation of Free Vibration Behavior of Porous Functionally Graded Sandwich Plates [Volume 12, Issue 3, 2025, Pages 555-568]
Amaniyah, M. Physical and Mechanical Properties of Biodegradable Film from Taro Starch (Xanthosoma Sagittifolium) and Duck Bone Gelatin [Volume 9, Issue 2, 2022, Pages 213-220]
Amiri, Ali RezaFinite Difference Analysis of 2D Stress Wave Propagation in Two Dimensional Functionally Graded Ceramics-Metals Composites [Volume 8, Issue 2, 2021, Pages 321-334]
Amiri, Farzad Experimental and Numerical Investigation of the Effect of Embedding Steel Wires inside the Foam of GFRP/Foam Sandwich Panel under Three-Point Bending Load [Volume 11, Issue 2, 2024, Pages 271-280]
Amirjan, Mostafa The Role of Natural Additives on the Wear and Friction Proper-ties of Nanocomposites for Friction Applications [Volume 6, Issue 2, 2019, Pages 159-165]
Ammouchi, Nesrine Development of a Composite Material Based on a Polymer and Plant Fibers [Volume 13, Issue 2, 2026, Pages 391-399]
Amoochi, Abbas Numerical Optimization of Non-destructive Ultrasonic Testing in Identifying Defects in Composite Structure of Pine Tree Trunk [Volume 11, Issue 1, 2024, Pages 249-258]
Amoochi, Abbas Parametric Investigation of Particle Movements in Ultrasonic Levitation Process Using Piezoelectric Materials [Volume 13, Issue 2, 2026, Pages 357-369]
Amosa, M. K.Mechanical, Crystallographic, and Microstructural Analysis of Polymer Composites Developed from Iron Filings and Polystyrene Wastes [Volume 9, Issue 1, 2022, Pages 137-145]
Anerao, Prashant A Comparative Study of Machine Learning Techniques for Predicting Mechanical Properties of Fused Deposition Modelling (FDM)-Based 3D-Printed Wood/PLA Biocomposite [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 261-270]
Angadi, Shrishail Basappa Effect of Ceramic Boron Carbide Particles Addition on the Mechanical and Microstructural Characteristics of Al7020 Alloy Composites [Volume 12, Issue 1, 2025, Pages 169-180]
Ansari, Reza Environmental Effects on Mechanical Properties of Glass/Epoxy and Fiber Metal Laminates, Part I: Hygrothermal Aging [Volume 4, Issue 3, 2017, Pages 187-196]
Ansari, Reza Environmental effects on mechanical properties of glass/epoxy and fiber metal laminates, Part II: Isothermal aging [Volume 4, Issue 3, 2017, Pages 197-205]
Arab, B. Mechanical Properties of CNT-Reinforced Polymer Nano-composites: A Molecular Dynamics Study [Volume 3, Issue 2, 2016, Pages 113-121]
Arab Hasanabade, Majid Strengthening of One-Way Slabs Using Composite Laminates of HPFRCC Including Synthetic Fibers PPS [Volume 9, Issue 1, 2022, Pages 185-197]
Arabloo Faraji, Mohammad Javad Vibration Analysis of Sandwich Beams with Magnetorheological Elastomer Core and FGM Graphene Nanoplatelet-Reinforced Polymer Faces on Viscoelastic Foundation [Volume 12, Issue 3, 2025, Pages 447-464]
Arabzadeh-Ziari, Erfan Static Bending, Vibration, and Buckling Responses of a Sandwich Beam Composed of Five Layers Considering Honeycomb Core and CNTRC with SMA Particles and Temperature-Dependent Material Properties Using SSDT [Volume 12, Issue 1, 2025, Pages 153-168]
Arabzadeh-Ziari, Mohammad Static Bending, Vibration, and Buckling Responses of a Sandwich Beam Composed of Five Layers Considering Honeycomb Core and CNTRC with SMA Particles and Temperature-Dependent Material Properties Using SSDT [Volume 12, Issue 1, 2025, Pages 153-168]
Arani, Rajendra Prasad Mechanical Testing of Novel and Conventional Geopolymer Brick Dried under Passive Solar Dryer with Ferric Chloride Dihydrate as Phase Change Material [Volume 13, Issue 1, 2026, Pages 23-35]
Ardebili, Amirreza Enhancing Strength of Nomex Sandwich Structures through the Utilization of Nano Clay Dispersed Epoxy Resin: A Study in Aerospace Applications [Volume 12, Issue 3, 2025, Pages 473-482]
Arefi, Mohammad The Effect of Temperature Dependency on the Thermo-Electro-Elastic Analysis of Functionally Graded Piezoelectric Spherical Shell [Volume 6, Issue 1, 2019, Pages 1-8]
Arefi, Mohammad Thermoelastic Analysis of a Functionally Graded Simple Blade Using First-Order Shear Deformation Theory [Volume 7, Issue 1, 2020, Pages 147-155]
Arora, Gaurav Exploring Multi-Scale Thermal Behaviour in Pin-on-Disc Systems for Organic, Metallic, Ceramic, and Polymer Composites [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 305-317]
Asanjarani, Ali Free Vibration Analysis of 2D Functionally Graded Annular Plate considering the Effect of Material Composition via 2D Differential Quadrature Method [Volume 2, Issue 2, 2015, Pages 95-111]
Asemi, Kamran Numerical Investigation on Thermal Post-buckling Of Annular Sector Plates Made of FGM Via 3D Finite Element Method [Volume 8, Issue 2, 2021, Pages 309-320]
Asgari, Masoud Crushing Analysis of Empty and Foam-Filled Cylindrical and Conical Corrugated Composite Tubes [Volume 6, Issue 1, 2019, Pages 35-44]
Asgari, Mohsen Static Bending, Vibration, and Buckling Responses of a Sandwich Beam Composed of Five Layers Considering Honeycomb Core and CNTRC with SMA Particles and Temperature-Dependent Material Properties Using SSDT [Volume 12, Issue 1, 2025, Pages 153-168]
Asgari, Tahmoores Free Vibrations Analysis of Functionally Graded Rectangular Nano-plates based on Nonlocal Exponential Shear Deformation Theory [Volume 2, Issue 2, 2015, Pages 79-93]
Ashok, R. BanagarExperimental and Finite Element Studies on Free Vibration of Areca Leaf Sheath Reinforced Polymer Composites [Volume 8, Issue 2, 2021, Pages 367-388]
Ashory, Mohammad Reza Vibration Analysis of Circular Single-Layer Graphene Sheet Using Finite Element Method [Volume 6, Issue 2, 2019, Pages 131-138]
Ashrafian, Roozbeh The Effect of Different Weighting Ratios, Length, and Thickness on Weighted Sum of the First Natural Frequency and Critical Buckling Load for a Laminated Composite Circular Cylindrical Shell [Volume 8, Issue 1, 2021, Pages 87-98]
Ashrafian, Roozbeh Longitudinal Vibration of Nanobeams by Two-Phase Local/Nonlocal Elasticity, Rayleigh Theory, and Generalized Differential Quadrature Method [Volume 10, Issue 2, 2023, Pages 221-232]
Assadi, Abbass Size-dependent Vibration Analysis of Non-uniform Mass Sensor Nanobeams [Volume 8, Issue 2, 2021, Pages 235-244]
Aswalekar, Uday Mechanical and Tribological Characterization of Eco-Friendly Brake Pads Using Banana Peel Powder as a Sustainable Friction Material [Volume 13, Issue 2, 2026, Pages 427-437]
Auradi, V Mechanical Characterization and Wear Behavior of Nano TiO2 Particulates Reinforced Al7075 Alloy Composites [Volume 7, Issue 1, 2020, Pages 71-78]
Auradi, Virupaxi Effect of Ceramic Boron Carbide Particles Addition on the Mechanical and Microstructural Characteristics of Al7020 Alloy Composites [Volume 12, Issue 1, 2025, Pages 169-180]
Auradi, Virupaxi Reinforcement Surface Modification Effect on the Microstructure, Mechanical, and Tensile Fractography of Al2219 Alloy B4C Composites [Volume 13, Issue 1, 2026, Pages 197-210]
Averichev, Oleg Climatic Testing of Polytetrafluoroethylene Based Composites [(Articles in Press)]
Awati, Sandesh Optimizing the Design and Conducting Comparative Testing for a Composite Elliptical Leaf-spring Damper [(Articles in Press)]
Ayatollahi, M.R. Atomic Simulation of Temperature Effect on the Mechanical Properties of Thin Films [Volume 2, Issue 1, 2015, Pages 31-38]
Azadi, Mahboobeh A Comparative Study on the Microstructure and Mechanical Properties of Al-Si-Cu/1wt %NCP Composites after T6 Heat Treatment [Volume 7, Issue 1, 2020, Pages 129-136]
Azadi, Mohammad Health Monitoring for Composite under Low-Cycle Cyclic Loading, Considering Effects of Acoustic Emission Sensor Type [Volume 6, Issue 1, 2019, Pages 19-26]
Azadi, Mohammad Study of High-cycle Fatigue Properties in Bovine Tibia Bones based on Reliability and Scatter-band Predictions [Volume 7, Issue 2, 2020, Pages 255-261]
Azadi, Mohammad Ultrasonic Assisted Drilling of Carbon Fiber Reinforced Plastic Composites with Non-Rotating Vibratory Tool [Volume 9, Issue 1, 2022, Pages 147-154]
Azarafza, Reza Theoretical, numerical, and experimental analyses of free vibrations of glass fiber reinforced polymer plates with central cutouts and free boundaries [Volume 5, Issue 1, 2018, Pages 67-74]
Azarafza, Reza Investigation of Free Vibration of Laminated Composite Conical Shell with Local Attached Mass [Volume 9, Issue 1, 2022, Pages 173-184]
Azarafza, Reza Machining Behavior of Al-MMC Reinforced with Hybrid Additives: Effects of Cutting Parameters – A Taguchi Approach [Volume 14, Issue 1, 2027, Pages 165-180]
Azarafza, Reza Experimental Investigation and RSM-Based Optimization of Phenolic/PTFE/SiC Composites [Volume 14, Issue 1, 2027, Pages 237-254]
Azizi, Saber On the Nonlinear Dynamics of an Energy Harvesting Device Based on Magnetostriction [Volume 8, Issue 1, 2021, Pages 33-40]
B
Babaei, Alireza Vibration Characteristics of Functionally Graded Micro-Beam Carrying an Attached Mass [Volume 7, Issue 1, 2020, Pages 49-58]
Babaei, Masoud Numerical Investigation on Thermal Post-buckling Of Annular Sector Plates Made of FGM Via 3D Finite Element Method [Volume 8, Issue 2, 2021, Pages 309-320]
Babu, Jalumedi Multi-response Optimization while Drilling of Composite Laminate with Core Drill by Grey Entropy Fuzzy (GEF) Method [Volume 11, Issue 2, 2024, Pages 483-502]
Babu, Karthick Thrust Force and Delamination Analysis on Redmud-Filled Coconut Sheath Fiber Polyester Composite [Volume 12, Issue 1, 2025, Pages 43-52]
Babu Loganathan, Sunith Effect of ON and OFF Axis Open Hole Tensile Testing of GFRP/Epoxy Composites [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 319-328]
Babu Loganathan, Sunith Influence of Kevlar on Impact Damage Assessment of Carbon Fiber Hybrid Composite Laminate [Volume 12, Issue 3, 2025, Pages 497-505]
Baby, Riya Analysis of SH-waves Propagating in Multiferroic Structure with Interfacial Imperfection [Volume 9, Issue 1, 2022, Pages 1-10]
Bafandeh Haghighi, Shadan Experimental Analysis of the Effect of Mechanical Topology on the Surface of Biological Microgripper Made of Ionic-Polymer Metal Composite Smart Material [Volume 13, Issue 1, 2026, Pages 143-156]
Baghani, Hossein Investigation of Free Vibration of Laminated Composite Conical Shell with Local Attached Mass [Volume 9, Issue 1, 2022, Pages 173-184]
Baghbani, Ramin Mesh-free Dynamic Analyses of FGM Sandwich Plates Resting on A Pasternak Elastic Foundation [Volume 4, Issue 2, 2017, Pages 153-168]
Bahadorani, Navid Large Deformation Elastic Analysis of Pressurized FGM Thick Cylindrical Shells with Nonlinear Plane Elasticity Theory (NPET) [Volume 12, Issue 1, 2025, Pages 129-140]
Baharvandi, Hamidreza The Effect of Al Additive and Arc Melting Time on Synthesis of Ti3SiC2 MAX Phase using Ti/SiC/Al/Graphite [Volume 9, Issue 2, 2022, Pages 367-376]
Baharvandi, Hamidreza The Effect of Nano-B4C Additive on Microstructure and Mechanical Properties of Pressureless Sintering SiC Bodies [Volume 10, Issue 1, 2023, Pages 29-42]
Bahmanabadi, Hamed Study of High-cycle Fatigue Properties in Bovine Tibia Bones based on Reliability and Scatter-band Predictions [Volume 7, Issue 2, 2020, Pages 255-261]
Bahrami, Mohammad Propagation of Matrix Cracking and Induced Delaminatin in Cross-Ply Composite Beams Subjected to Bending Loads [Volume 6, Issue 1, 2019, Pages 45-50]
Bakhsheshy, Ali Free Natural Frequency Analysis of an FG Composite Rectangular Plate Coupled with Fluid using Rayleigh–Ritz Method [Volume 1, Issue 2, 2014, Pages 131-143]
Bakhshi, Arsalan Study on Compression and Flexural Behavior of ABS-SiO2 Poly-mer Matrix Composite Fabricated by Hot Extrusion [Volume 6, Issue 2, 2019, Pages 239-247]
Bakhy, Sadeq Hussein Numerical and Analytical Investigation of Free Vibration Behavior of Porous Functionally Graded Sandwich Plates [Volume 12, Issue 3, 2025, Pages 555-568]
Bangalore Chandrashekar, Nidhi Performance Evaluation of Epoxy-Based Natural Composites Reinforced with Flax and Flax-Ramie Fiber [Volume 13, Issue 1, 2026, Pages 13-22]
Bangera, Mithil Evaluation of Heat Resistance Characteristics of Fibrous Material for Cold Weather Application [Volume 11, Issue 1, 2024, Pages 231-238]
Bansal, Punya Comparative Investigation of Epoxy-terminated and Carboxyl-terminated Butadiene Nitrile Rubber for Toughened Epoxy Resins [Volume 14, Issue 1, 2027, Pages 99-122]
Baroi, Juhi Analysis of SH-waves Propagating in Multiferroic Structure with Interfacial Imperfection [Volume 9, Issue 1, 2022, Pages 1-10]
Basati, F. Dynamic and Buckling Analysis of Hybrid Composite Beam Strengthened with Carbon Fibers/Aramid Fibers under Temperature Gradient [Volume 11, Issue 1, 2024, Pages 203-216]
Basavaraju, B. Experimental and Finite Element Studies on Free Vibration of Areca Leaf Sheath Reinforced Polymer Composites [Volume 8, Issue 2, 2021, Pages 367-388]
Bayat Kazazi, Mahdi Numerical Optimization of Non-destructive Ultrasonic Testing in Identifying Defects in Composite Structure of Pine Tree Trunk [Volume 11, Issue 1, 2024, Pages 249-258]
Belkacem, Mokhtar Experimental and Numerical Analyses of Alfa/Polyester Composite Under Three-Point Bending [Volume 12, Issue 1, 2025, Pages 211-222]
Bellili, Nadira Development of a Composite Material Based on a Polymer and Plant Fibers [Volume 13, Issue 2, 2026, Pages 391-399]
Benammar, Samir Failure Probability Analysis of Composite Pressure Tanks Using Subset Simulation [Volume 11, Issue 2, 2024, Pages 363-374]
Benbouras, Youssef THEORETICAL MODELS FOR COMPOSITE BEAMS AND PLATES, SANDWICH AND FGM: A REVIEW OF ESL, LAYERWISE AND CUF APPROACHES [(Articles in Press)]
Ben Daly, H. Modeling of Hygrothermal Damage of Composite Materials [Volume 3, Issue 2, 2016, Pages 137-144]
Bhalla, Neelanchali Asija Comparative Investigation of Epoxy-terminated and Carboxyl-terminated Butadiene Nitrile Rubber for Toughened Epoxy Resins [Volume 14, Issue 1, 2027, Pages 99-122]
Bhanavathu, Balakrishna Shift-Robust Machine Learning Surrogate with Importance-Weighted Conformal Prediction for Vibration and Inverse Design of Functionally Graded Porous Tapered Beams [(Articles in Press)]
Bharadvaj, Mayank Thermo-Mechanical and Wear Properties of Natural Fiber-Reinforced Epoxy Composites for Structural Applications [Volume 12, Issue 1, 2025, Pages 141-152]
Bhaskar, Dhiraj Geometrically Nonlinear Analysis of Laminated Composite Plates subjected to Uniform Distributed Load Using a New Hypothesis: the finite element method (FEM) Approach [Volume 7, Issue 2, 2020, Pages 271-285]
Bhowmick, Shubhankar An Investigation of Stress and Deformation Behavior of Functionally Graded Timoshenko Beams subjected to Thermo-Mechanical Load [Volume 7, Issue 1, 2020, Pages 157-176]
Bhowmick, Shubhankar Thermo–Elastic Stresses and Deformation Analysis of FG Rotating Hollow Spherical Body [Volume 9, Issue 1, 2022, Pages 125-136]
Biradar, Akash Effect of Chilling & B4C content on Machining Efficiency and Surface Quality in Wire-Cut Machining of Aluminum Matrix Chilled Composites [Volume 11, Issue 2, 2024, Pages 341-350]
Bishnoi, Kamal Complementary Split Ring Resonator-Inspired Antenna for Wearable Multiband Applications Using Biodegradable Polylactic Acid [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 339-352]
Biswas, Amalendu Higher Order Approximations for Bending of FG Beams Using B-Spline Collocation Technique [Volume 11, Issue 1, 2024, Pages 159-176]
B M, PRAVEENKUMARA Optimization of Machining parameters of Titanium Di-Oxide (TiO2) and Graphite Reinforced Aluminum Alloy Metal Matrix by Taguchi Grey Relational Analysis Technique [(Articles in Press)]
Bohanon, Brandon Material Mechanical Properties Prediction of Layer with Multidirectional Fiber Ply Reinforced Polymer Matrix Composites [Volume 9, Issue 2, 2022, Pages 221-227]
Borhani, E. The Structural and Mechanical Properties of Al-2.5%wt. B4C Met-al Matrix Nano-composite Fabricated by the Mechanical Alloying [Volume 2, Issue 1, 2015, Pages 39-44]
Borhani, E. Effect of Particle Size on the Structural and Mechanical Properties of Al–AlN Nanocomposites Fabricated by Mechanical Alloying [Volume 2, Issue 2, 2015, Pages 73-78]
Borhani, Ehsan Effects of reinforcement distribution on the mechanical properties of Al–Fe3O4 nanocomposites fabricated via accumulative roll bonding [Volume 5, Issue 2, 2018, Pages 131-139]
Bouafia, Youcef Numerical Estimation of the Effective Mechanical Properties (EMP) of Steel AISI 4340 Fiber-Reinforced Concrete [Volume 14, Issue 1, 2027, Pages 151-163]
Boulkesrane, Chems El Douha Development of a Composite Material Based on a Polymer and Plant Fibers [Volume 13, Issue 2, 2026, Pages 391-399]
Boutaani, Mohamed Said Numerical Estimation of the Effective Mechanical Properties (EMP) of Steel AISI 4340 Fiber-Reinforced Concrete [Volume 14, Issue 1, 2027, Pages 151-163]
Bouziane, Mohammed Mokhtar Experimental and Numerical Analyses of Alfa/Polyester Composite Under Three-Point Bending [Volume 12, Issue 1, 2025, Pages 211-222]
Bridjesh, P. Comparison of Deflection in Two-Directional Functionally Graded Tapered Beam [Volume 11, Issue 1, 2024, Pages 191-202]
Bridjesh, Pappula On Numerical Investigation of Buckling in Two-Directional Porous Functionally Graded Beam Using Higher Order Shear Deformation Theory [Volume 10, Issue 2, 2023, Pages 393-406]
Bright, Renjin Jasmine Effect of Aspect Ratio on the Workability of AA6082/Metakaolin/Nano Silicon Nitride Composites: An Experimental Investigation and Predictive Modeling using RSM and ANN [Volume 14, Issue 1, 2027, Pages 217-236]
B S, Nithyananda Optimization of Machining parameters of Titanium Di-Oxide (TiO2) and Graphite Reinforced Aluminum Alloy Metal Matrix by Taguchi Grey Relational Analysis Technique [(Articles in Press)]
C
Castiglia Gonzaga, Carla 2D Bond-Based Peridynamic Simulation of Phase Transformation in 3Y-TZP Dental Ceramics Using ABAQUS [Volume 14, Issue 1, 2027, Pages 27-39]
Chakrabarti, Anupam Flexural Behaviour of Nanocomposite Plate with CNT Distribution and Agglomeration Effect [Volume 10, Issue 1, 2023, Pages 123-136]
Chakrabarti, Anupam Response of Agglomerated SWCNT Reinforced Nanocomposite Plate under Hygro-Thermal Loading [Volume 11, Issue 1, 2024, Pages 11-40]
Chalabi Tehran, Ata A Study of the Effect of TPU and Clay Nanoparticles on the Mechanical Behavior of PBT-Based Nanocomposites [Volume 4, Issue 3, 2017, Pages 179-186]
Chalak, H DBuckling Analysis of Functionally Graded Sandwich Beam Based on Third-Order Zigzag Theory [Volume 10, Issue 1, 2023, Pages 55-68]
Chandra Mohana Reddy, Gangi Reddy Gari Comparative Investigation of Deflection in a Bi-directional Curved Functionally Graded Porous Beam Using Unified Shear Deformation Theory [Volume 14, Issue 1, 2027, Pages 57-73]
Chandrashekar, Rajarathnam Effect of Nickel Addition on the Coefficient of Thermal Expansion and Microstructural Characteristics of AA2024 and AA7175 Aluminum Alloys in As-Cast and Homogenized States [Volume 13, Issue 1, 2026, Pages 97-116]
Charerntanom, Wissanu Characterization of Physical and Mechanical Properties, and Morphology of Wood Composites Derived from Milk Bottles and Teak Sawdust Powder [Volume 13, Issue 2, 2026, Pages 259-269]
Chatti, S. Modeling of Hygrothermal Damage of Composite Materials [Volume 3, Issue 2, 2016, Pages 137-144]
Chatti, Sami Springback Prediction of Sandwich Panel Using Machine Learning Methods [Volume 10, Issue 1, 2023, Pages 11-20]
Chaudhary, Vijaykumar Artificial Neural Network (ANN) Approach to Predict Tensile Properties of Longitudinally Placed Fiber Reinforced Polymeric Composites including Interphase [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 353-360]
Chaudhuri, Puja Basu Maximization of Fundamental Frequency of Composite Stiffened Hypar Shell with Cutout by Taguchi Method [Volume 10, Issue 1, 2023, Pages 43-54]
Chauhan, Shivanku Optimal Replacement of Glass Fabric with Carbon Fabric in Epoxy Matrix Composite [Volume 12, Issue 3, 2025, Pages 507-522]
Chauhan, Sumika Bearing Response Prediction in Hydrothermal Aged Carbon Fiber Reinforced Epoxy Composite Joints Using Machine Learning Techniques [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 329-338]
Chavan, Yash Evaluation of Heat Resistance Characteristics of Fibrous Material for Cold Weather Application [Volume 11, Issue 1, 2024, Pages 231-238]
Cherif, Aida Modeling Aeroelastic Vibration Dampening in Wind Turbine Blades using Piezoelectric Materials [Volume 12, Issue 3, 2025, Pages 685-694]
Chikkanna, Anil KyathasandraEffect of Chilling & B4C content on Machining Efficiency and Surface Quality in Wire-Cut Machining of Aluminum Matrix Chilled Composites [Volume 11, Issue 2, 2024, Pages 341-350]
Chintalpudi, Ravikiran Comparative Investigation of Deflection in a Bi-directional Curved Functionally Graded Porous Beam Using Unified Shear Deformation Theory [Volume 14, Issue 1, 2027, Pages 57-73]
Chokshi, Sagar Artificial Neural Network (ANN) Approach to Predict Tensile Properties of Longitudinally Placed Fiber Reinforced Polymeric Composites including Interphase [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 353-360]
Choopanian Benis, Ali Experimental Investigation on Quasi-Static Impact Response of Glass/Epoxy Composite Corrugated Core Sandwich Panels [Volume 10, Issue 2, 2023, Pages 283-294]
Christiyan Kumaravelu Grace Jesu Bai, Jaya Effect of ON and OFF Axis Open Hole Tensile Testing of GFRP/Epoxy Composites [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 319-328]
Chumsamrong, Pranee Biodegradation, Mechanical and Physical Properties of Poly(butylene succinate) and Natural Rubber Compound Blend Filled with Activated Carbon from Coconut Fruit [Volume 13, Issue 1, 2026, Pages 157-169]
Cinquemani, Simone Parametric Investigation of Particle Movements in Ultrasonic Levitation Process Using Piezoelectric Materials [Volume 13, Issue 2, 2026, Pages 357-369]
D, SHRINIVASA Optimization of Machining parameters of Titanium Di-Oxide (TiO2) and Graphite Reinforced Aluminum Alloy Metal Matrix by Taguchi Grey Relational Analysis Technique [(Articles in Press)]
Dairi, Badrina Development of a Composite Material Based on a Polymer and Plant Fibers [Volume 13, Issue 2, 2026, Pages 391-399]
Dairi, Nassima Development of a Composite Material Based on a Polymer and Plant Fibers [Volume 13, Issue 2, 2026, Pages 391-399]
Damania, Jay A Meshfree Approach for Bending Analysis of Porous Rectangular FGM Plate Resting on Elastic Foundation [Volume 9, Issue 2, 2022, Pages 303-316]
Dang, Van Hieu Buckling and Nonlinear Vibration of Functionally Graded Porous Micro-beam Resting on Elastic Foundation [Volume 9, Issue 1, 2022, Pages 75-88]
Daniali, M. Dynamic Characteristics of Joined Steel and Carbon Fiber-Reinforced Plastic Tubes: Experimental and Numerical Investigation [Volume 4, Issue 2, 2017, Pages 88-97]
Darvizeh, Abolfazl Environmental Effects on Mechanical Properties of Glass/Epoxy and Fiber Metal Laminates, Part I: Hygrothermal Aging [Volume 4, Issue 3, 2017, Pages 187-196]
Darvizeh, Abolfazl Environmental effects on mechanical properties of glass/epoxy and fiber metal laminates, Part II: Isothermal aging [Volume 4, Issue 3, 2017, Pages 197-205]
Dashtbayazi, M. R. Nonlinear Vibration Analysis of the Composite Cable using Perturbation Method and the Green-Lagrangian Nonlinear Strain [Volume 6, Issue 1, 2019, Pages 27-34]
Davar, A. Free Vibration of Lattice Cylindrical Composite Shell Reinforced with Carbon Nano-tubes [Volume 2, Issue 1, 2015, Pages 61-72]
Davar, Ali Theoretical, numerical, and experimental analyses of free vibrations of glass fiber reinforced polymer plates with central cutouts and free boundaries [Volume 5, Issue 1, 2018, Pages 67-74]
Davar, Ali A New Three-Dimensional Refined Higher-Order Theory for Free Vibration Analysis of Composite Circular Cylindrical Shells [Volume 6, Issue 2, 2019, Pages 201-223]
Davar, Ali Thermal Buckling and Thermal Induced free Vibration Analysis of Perforated Composite Plates: a Mathematical Model [Volume 7, Issue 1, 2020, Pages 15-23]
Davar, Ali Free Vibration Analysis of Combined Cylindrical-Conical Composite Shells using First-Order Shear Deformation Theory [Volume 8, Issue 2, 2021, Pages 269-282]
Davar, Ali Buckling Analysis of Composite Grid-Stiffened Cylindrical Shells Using a Generalized Equivalent Single Layer Theory [Volume 8, Issue 2, 2021, Pages 455-466]
Davar, Ali Investigation of Free Vibration of Laminated Composite Conical Shell with Local Attached Mass [Volume 9, Issue 1, 2022, Pages 173-184]
Davar, Ali Asymmetric and Oblique Impact on Perforated Plate and Ceramic–Composite Armor Systems: A numerical Study [(Articles in Press)]
Davar, Ali Experimental Investigation and RSM-Based Optimization of Phenolic/PTFE/SiC Composites [Volume 14, Issue 1, 2027, Pages 237-254]
De Britto, Jose Benedicta John Design and Analysis of Complementary Split Ring Resonator Based Low Profile Antenna Using Lightweight Polymers for Wireless, Radar and Satellite Communication [Volume 12, Issue 3, 2025, Pages 569-584]
Deepthy, G. S. S-Parameter Analysis of Three-Layered Aperture Coupled Antenna with a Flame Retardant-4 Composite Material as Substrate for Biomedical Applications [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 361-369]
Dehghani, Davood Parametric Investigation of Particle Movements in Ultrasonic Levitation Process Using Piezoelectric Materials [Volume 13, Issue 2, 2026, Pages 357-369]
Derbel, Nabil Modeling Aeroelastic Vibration Dampening in Wind Turbine Blades using Piezoelectric Materials [Volume 12, Issue 3, 2025, Pages 685-694]
Dewangan, Rishi Mechanical Properties and Water Absorption of Epoxy Composites Reinforced with Treated Long Hair Fiber for Sustainable Manufacturing [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 379-392]
Dhalait, Javed Tensile, Flexural, and Impact Strength Analysis of a 3D Printed Carbon Fiber Reinforced Nylon Filament [Volume 12, Issue 3, 2025, Pages 615-627]
Dhalait, Javed Lattice Structure Optimization of 3D Printed TPMS under Different Loading Conditions Using Regression Machine Learning [Volume 12, Issue 3, 2025, Pages 597-613]
Dhiman, Babita Bearing Response Prediction in Hydrothermal Aged Carbon Fiber Reinforced Epoxy Composite Joints Using Machine Learning Techniques [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 329-338]
Doddamani, Saleemsab Effect of Aging on Fracture Toughness of Al6061-Graphite Particulate Composites [Volume 6, Issue 2, 2019, Pages 139-146]
Doostmohamadi, Mahsa Improving the Performance of Porous Concrete Composites Using Zeolite as a Coarse Grain [Volume 5, Issue 2, 2018, Pages 157-163]
Dwi Kartika, Lintang Metallurgical Assessment of Graphite Reinforced Al-Cu-Mg Nanocomposites Produced by the Shaker Mill Method [Volume 10, Issue 1, 2023, Pages 103-110]
Dwitama, Dicky Hartawan Pandanus Tectorius Fiber/ Rice Husk Powder as Green Reinforcement for Lightweight Composites: Evaluation of Impact Strength Properties and Thermal Stability [Volume 12, Issue 3, 2025, Pages 695-706]
Dwivedi, Umesh Kumar Mechanical Properties and Water Absorption of Epoxy Composites Reinforced with Treated Long Hair Fiber for Sustainable Manufacturing [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 379-392]
E
Ebrahami, F. Assessment of Hydrostatic Stress and Thermo Piezoelectricity in a Laminated Multilayered Rotating Hollow Cylinder [Volume 8, Issue 1, 2021, Pages 77-86]
Ebrahami, Farzad Vibration in an Electrically Affected Hygro-magneto-thermo-flexo Electric Nanobeam Embedded in Winkler-Pasternak Foundation [Volume 8, Issue 2, 2021, Pages 401-414]
Ebrahimi, Zohreh Microstructure, Mechanical and Electrical Properties of Copper Matrix Composites Reinforced with Steel Nanoparticles [Volume 8, Issue 2, 2021, Pages 335-345]
Eghbali, Mohammadreza On Moving Harmonic Load and Dynamic Response of Carbon Nanotube-Reinforced Composite Beams using Higher-Order Shear Deformation Theories [Volume 10, Issue 2, 2023, Pages 257-270]
Ekhteraei Toussi, Hamid Delamination Analysis in Composite Root of a Carbon-Layer Reinforced Wind Turbine Blade [Volume 6, Issue 1, 2019, Pages 9-18]
Elfahime, Benaissa THEORETICAL MODELS FOR COMPOSITE BEAMS AND PLATES, SANDWICH AND FGM: A REVIEW OF ESL, LAYERWISE AND CUF APPROACHES [(Articles in Press)]
Emami, J. Free Vibration of Lattice Cylindrical Composite Shell Reinforced with Carbon Nano-tubes [Volume 2, Issue 1, 2015, Pages 61-72]
Emrahi, Reza Investigation of Buckling Analysis of Epoxy/ Nanoclay/ Carbon Fiber Hybrid Laminated Nanocomposite: Using VARTM Technique for Preparation [Volume 3, Issue 1, 2016, Pages 63-71]
Eroglu, Mehmet Multifunctional Properties of Metal Fibers Reinforced Polymer Composites – A Review [Volume 11, Issue 1, 2024, Pages 217-230]
Esfandiar, Milad Capillary Effects on Surface Enhancement in a Non-Homogeneous Fibrous Porous Medium [Volume 5, Issue 1, 2018, Pages 83-90]
Esfandiari, Akbar Damage Detection in Concrete Filled Tube Columns Based on Experimental Modal Data and Wavelet Technique [Volume 7, Issue 2, 2020, Pages 245-254]
Eskandari Jam, J. Free Vibration of Lattice Cylindrical Composite Shell Reinforced with Carbon Nano-tubes [Volume 2, Issue 1, 2015, Pages 61-72]
Eskandari Jam, Jafar Theoretical, numerical, and experimental analyses of free vibrations of glass fiber reinforced polymer plates with central cutouts and free boundaries [Volume 5, Issue 1, 2018, Pages 67-74]
Eskandari Jam, Jafar Thermal Buckling and Thermal Induced free Vibration Analysis of Perforated Composite Plates: a Mathematical Model [Volume 7, Issue 1, 2020, Pages 15-23]
Eskandari Jam, Jafar Free Vibration Analysis of Combined Cylindrical-Conical Composite Shells using First-Order Shear Deformation Theory [Volume 8, Issue 2, 2021, Pages 269-282]
Eskandari Jam, Jafar Buckling Analysis of Composite Grid-Stiffened Cylindrical Shells Using a Generalized Equivalent Single Layer Theory [Volume 8, Issue 2, 2021, Pages 455-466]
Eskandari Jam, Jafar Experimental and Numerical Investigation of the Effect of Embedding Steel Wires inside the Foam of GFRP/Foam Sandwich Panel under Three-Point Bending Load [Volume 11, Issue 2, 2024, Pages 271-280]
Eskandari Jam, Jafar Molecular Dynamic Investigation of Graphene Oxide Presence and Three Experimental Distribution Methods in Reinforced Epoxy-Based Nanocomposites [Volume 12, Issue 1, 2025, Pages 115-128]
Eskandari Jam, Jafar Enhancing Strength of Nomex Sandwich Structures through the Utilization of Nano Clay Dispersed Epoxy Resin: A Study in Aerospace Applications [Volume 12, Issue 3, 2025, Pages 473-482]
Eskandari Jam, Jafar Asymmetric and Oblique Impact on Perforated Plate and Ceramic–Composite Armor Systems: A numerical Study [(Articles in Press)]
Eskandari Jam, Jafar Experimental Investigation and RSM-Based Optimization of Phenolic/PTFE/SiC Composites [Volume 14, Issue 1, 2027, Pages 237-254]
Eskandari-Jam, Jafar A Semi-analytical Solution for 3-D Dynamic Analysis of Thick Continuously Graded Carbon Nanotube-reinforced Annular Plates Resting on a Two-parameter Elastic Foundation [Volume 1, Issue 2, 2014, Pages 113-130]
Eskandari Shahraki, Majid Free Vibration Analysis of Combined Cylindrical-Conical Composite Shells using First-Order Shear Deformation Theory [Volume 8, Issue 2, 2021, Pages 269-282]
Eskandari Shahraki, Majid Buckling Analysis of Composite Grid-Stiffened Cylindrical Shells Using a Generalized Equivalent Single Layer Theory [Volume 8, Issue 2, 2021, Pages 455-466]
Eskandariyan, Fahime Investigation of Nonlinear Behavior of Composite Bracing Structures with Concrete Columns and Steel Beams (RCS) Applying Finite Element Method [Volume 7, Issue 1, 2020, Pages 25-37]
Eskandarzadeh, Shahin Influence of Different Foaming Conditions on the Mechanical, Physical, and Structural Properties of Polypropylene Foam [Volume 6, Issue 2, 2019, Pages 225-237]
Eslami-Farsani, R. Accelerated Heat Aging Study of Phenolic/Basalt Fiber Reinforced Composites [Volume 3, Issue 1, 2016, Pages 1-7]
Eslami-Farsani, R. Investigation of Tensile Characteristics of an Epoxy Matrix Com-posite with Uni-Directional and Hybrid Tissue Natural Hemp Fibers [Volume 6, Issue 2, 2019, Pages 181-190]
Esmkhani, Masood Mechanical Properties of Graphene/Epoxy Nanocomposites under Static and Flexural Fatigue Loadings [Volume 1, Issue 1, 2014, Pages 1-7]
Fadly, Muhammad Syaiful Advanced FEA simulation of Mode II Interlaminar Fracture in Flax/Epoxy Multidirectional Laminate Composites Using the End-Notched Flexure (ENF) Test [(Articles in Press)]
Falahzade, Sina An Analytical Approach to Thermoelastic Bending of Simply Supported Advanced Ribbed Composite Plates [Volume 5, Issue 2, 2018, Pages 173-185]
Fallah, Abolfazl Free Vibrations Analysis of Functionally Graded Rectangular Nano-plates based on Nonlocal Exponential Shear Deformation Theory [Volume 2, Issue 2, 2015, Pages 79-93]
Fallah, Abolfazl Free Vibration Analysis of Size-Dependent, Functionally Graded, Rectangular Nano/Micro-plates based on Modified Nonlinear Couple Stress Shear Deformation Plate Theories [Volume 4, Issue 2, 2017, Pages 127-137]
Fallah, Famida Non-Linear Analysis of Functionally Graded Sector Plates with Simply Supported Radial Edges Under Transverse Loading [Volume 6, Issue 1, 2019, Pages 65-74]
Fallahzadeh Rastehkenar, Sina The Effects of the Moving Load and the Attached Mass-Spring-Damper System Interactions on the Dynamic Responses of the Composite Plates: An Analytical Approach [Volume 2, Issue 1, 2015, Pages 17-30]
Farahmandrad, Sahar Nonlinear Torsional Vibration Analysis of Nanorods in the Presence of Surface Energy Effect: Multi-Mode Galerkin Method [Volume 9, Issue 2, 2022, Pages 229-242]
Faraji Kalajahi, Pouya A Study of the Effect of TPU and Clay Nanoparticles on the Mechanical Behavior of PBT-Based Nanocomposites [Volume 4, Issue 3, 2017, Pages 179-186]
Farhadinia, M. Mechanical Properties of CNT-Reinforced Polymer Nano-composites: A Molecular Dynamics Study [Volume 3, Issue 2, 2016, Pages 113-121]
Farhadinia, Mahmood Failure Pressure Prediction of Semi Spherical GFRP Shells in Thermal Environment [Volume 7, Issue 1, 2020, Pages 103-108]
Faroughi, Shirko Vibration Characteristics of Functionally Graded Micro-Beam Carrying an Attached Mass [Volume 7, Issue 1, 2020, Pages 49-58]
Faroughi, Shirko Size-Dependent Nonlinear Dynamics of a Non-Uniform Piezoelectric Microbeam Based on the Strain Gradient Theory [Volume 7, Issue 2, 2020, Pages 321-331]
Farrokhabadi, Amin Damage Energy Evaluation in [55/-55]9 Composite Pipes using Acoustic Emission Method [Volume 2, Issue 2, 2015, Pages 127-134]
Farrokhabadi, Amin Propagation of Matrix Cracking and Induced Delaminatin in Cross-Ply Composite Beams Subjected to Bending Loads [Volume 6, Issue 1, 2019, Pages 45-50]
Farrokhabadi, Amin Investigation of Vibration Energy Harvesting in Multilayer Composite Plates with Anisotropic Piezoelectric Patches [Volume 12, Issue 1, 2025, Pages 223-234]
Farzannasab, Mahshad Study of High-cycle Fatigue Properties in Bovine Tibia Bones based on Reliability and Scatter-band Predictions [Volume 7, Issue 2, 2020, Pages 255-261]
Farzin, Saeed Improving the Performance of Porous Concrete Composites Using Zeolite as a Coarse Grain [Volume 5, Issue 2, 2018, Pages 157-163]
Fayzulla, Bayan JabbarMultifunctional Properties of Metal Fibers Reinforced Polymer Composites – A Review [Volume 11, Issue 1, 2024, Pages 217-230]
Fazeli, Hamid Molecular Dynamic Investigation of Graphene Oxide Presence and Three Experimental Distribution Methods in Reinforced Epoxy-Based Nanocomposites [Volume 12, Issue 1, 2025, Pages 115-128]
Fazelzadeh, S. Ahmad Buckling Analysis of Spherical Composite Panels Reinforced by Carbon Nanotube [Volume 2, Issue 2, 2015, Pages 135-144]
Fereidoon, A.B. The Effect of Processing Conditions on the Mechanical Properties of Polypropylene/Mesoporous Silica-Hydroxyapatite Hybrid Nanocomposites [Volume 3, Issue 2, 2016, Pages 73-82]
Fereidoon, Abdolhosein Applying an Artificial Neural Network to Predict the Mechanical Properties of Epoxy Resin with Graphite Additive After Water Absorption [Volume 13, Issue 1, 2026, Pages 245-257]
Fereidoon, Abdolhossein Optimization of Hybrid Composite Laminate Based on the Frequency using Imperialist Competitive Algorithm [Volume 1, Issue 1, 2014, Pages 37-48]
Fereidoon, Abdolhossein A Numerical and Analytical Solution for the Free Vibration of Laminated Composites Using Different Plate Theories [Volume 4, Issue 1, 2017, Pages 75-87]
Fereidoon, Abdoulhossein Low-Velocity Impact Behavior of Foam Core Sandwich Panels with Different Face Sheet Layers: Numerical and Experimental Study [Volume 10, Issue 1, 2023, Pages 111-122]
Feyz Sayadian, Ayat Size-Dependent Nonlinear Dynamics of a Non-Uniform Piezoelectric Microbeam Based on the Strain Gradient Theory [Volume 7, Issue 2, 2020, Pages 321-331]
Firouzbakht, Vahid Predicting Young’s Modulus of Aggregated Carbon Nanotube Reinforced Polymer [Volume 1, Issue 1, 2014, Pages 9-16]
Freidani, Meisam Elasto-dynamic Response Analysis of a Curved Composite Sandwich Beam Subjected to the Loading of a Moving Mass [Volume 7, Issue 2, 2020, Pages 347-354]
G
G, Rathnakar A Comparative Study on the Effect of HNT and Nano-Alumina Particles on the Mechanical Properties of Vacuum Bag Moulded Glass-Epoxy Nanocomposites [Volume 8, Issue 1, 2021, Pages 119-131]
G, Ravichandran A Comparative Study on the Effect of HNT and Nano-Alumina Particles on the Mechanical Properties of Vacuum Bag Moulded Glass-Epoxy Nanocomposites [Volume 8, Issue 1, 2021, Pages 119-131]
Ganesh, Radhakrishnan Optimization of Wear Behaviour on Mg-TiO2 Nanocomposite Using Taguchi Grey Relational Analysis [Volume 10, Issue 1, 2023, Pages 151-156]
Gangil, Brijesh Thermo-Mechanical and Wear Properties of Natural Fiber-Reinforced Epoxy Composites for Structural Applications [Volume 12, Issue 1, 2025, Pages 141-152]
Ganiger, Subhashchandra Reinforcement Surface Modification Effect on the Microstructure, Mechanical, and Tensile Fractography of Al2219 Alloy B4C Composites [Volume 13, Issue 1, 2026, Pages 197-210]
Gasmi, Laid Finite Element Analysis and Optimization of the Composite Plate Subjected to Close-Range Explosion [Volume 14, Issue 1, 2027, Pages 123-134]
Gaur, Piyush Comparative Investigation of Epoxy-terminated and Carboxyl-terminated Butadiene Nitrile Rubber for Toughened Epoxy Resins [Volume 14, Issue 1, 2027, Pages 99-122]
Geetha, Narayanan Kannaiyan On Numerical Investigation of Buckling in Two-Directional Porous Functionally Graded Beam Using Higher Order Shear Deformation Theory [Volume 10, Issue 2, 2023, Pages 393-406]
Ghaderi, Mohammad Reza Numerical Optimization of Non-destructive Ultrasonic Testing in Identifying Defects in Composite Structure of Pine Tree Trunk [Volume 11, Issue 1, 2024, Pages 249-258]
Ghadimi, Mojtaba Elastoplastic Analysis of Pressurized FG rotating Thick Cylinders Based on High-Order Shear Deformation Theory and Radial Return Method [Volume 11, Issue 1, 2024, Pages 119-130]
Ghadirian, Hossein Free Vibration Analysis of Composite Plates with Artificial Springs by Trigonometric Ritz Method [Volume 1, Issue 1, 2014, Pages 61-70]
Ghaemi, Fatemeh Failure Pressure Prediction of Semi Spherical GFRP Shells in Thermal Environment [Volume 7, Issue 1, 2020, Pages 103-108]
Ghannad, Mehdi Electro-Elastic Analysis of Finite Length FGPM Cylinders Subjected to Electromechanical Loading Using First-Order Electric Potential Theory [Volume 8, Issue 1, 2021, Pages 15-31]
Ghannad, Mehdi Elastoplastic Analysis of Pressurized FG rotating Thick Cylinders Based on High-Order Shear Deformation Theory and Radial Return Method [Volume 11, Issue 1, 2024, Pages 119-130]
Ghannad, Mehdi Large Deformation Elastic Analysis of Pressurized FGM Thick Cylindrical Shells with Nonlinear Plane Elasticity Theory (NPET) [Volume 12, Issue 1, 2025, Pages 129-140]
Gharaei, Amin Parametric Analysis of Position and Direction of Laminated Composite C-Spar on Aeroelastic Flutter in Aircraft Tail [Volume 11, Issue 2, 2024, Pages 351-362]
Ghareghashi, ABBAS Development and Characterization of a High-Performance Polyurethane-Based Colored Pavement Binder Including Calcium Carbonate and Polyethylene Glycol for Improved Thermal and Mechanical Durability [(Articles in Press)]
Gharibshahian, Elaheh Nanocomposite Thin Film of KTP Nanoparticles: Synthesis, Characterization and Optical Applications [Volume 13, Issue 2, 2026, Pages 465-473]
Ghasemi, Ahmad Reza Distribution of Residual Stresses in Polymer Reinforced Carbon Nanotubes and Laminated Carbon Fibers [Volume 4, Issue 1, 2017, Pages 9-18]
Ghasemi, Ahmad Reza Open-Hole Size and Thermal Cycling Effects on Mass Loss and Surface Degradation of Polymer Matrix Composites [Volume 4, Issue 2, 2017, Pages 111-116]
Ghasemi, Ahmad Reza Creep Strain and Stress Analysis in Laminated Composite Pres-sure Vessels [Volume 5, Issue 2, 2018, Pages 141-147]
Ghasemi, Ahmad Reza Discrepancies Between Free Vibration of FML and Composite Cylindrical Shells Reinforced by CNTs [Volume 6, Issue 2, 2019, Pages 105-115]
Ghasemi, Ahmad Reza Effects of Magnetic Field in Creep Behavior of Three-Phase Laminated Composite Cylindrical Shells [Volume 6, Issue 1, 2019, Pages 51-56]
Ghasemi, Ahmad Reza Buckling analysis of FML cylindrical shells under combined axial and torsional loading [Volume 7, Issue 2, 2020, Pages 263-270]
Ghasemi, Ahmad Reza Thermal Variations of Thermo-Mechanical Loading Effects on Creep Stress and Strain Distribution in Multi-layered Composite Cylinder [Volume 9, Issue 1, 2022, Pages 115-123]
Ghasemi, Ahmad Reza Minimal Mass and Maximal Buckling Load of Composite Hexagonal-Triangle Grid Structure using FSDT under External Hydrostatic Pressure [Volume 10, Issue 2, 2023, Pages 309-318]
Ghasemi, Ahmad Reza Parametric Analysis of Position and Direction of Laminated Composite C-Spar on Aeroelastic Flutter in Aircraft Tail [Volume 11, Issue 2, 2024, Pages 351-362]
Ghasemi, Ahmad Reza Statistical Analysis of Delamination Effect on Natural Frequency of Composite Laminated Plate [Volume 13, Issue 1, 2026, Pages 129-142]
Ghasemi, Ahmad-Reza Size-dependent Bending of Geometrically Nonlinear of Micro-Laminated Composite Beam based on Modified Couple Stress Theory [Volume 3, Issue 1, 2016, Pages 53-62]
Ghasemi, Behrooz Evaluation of hardness and wear resistance of nano-sized titanium-carbide-reinforced commercially cast aluminum alloy matrices [Volume 5, Issue 1, 2018, Pages 75-81]
Ghasemi, Behrooz Investigation of Hardness, Morphology and Structural Analysis of NiCrBSi Composite Coating on Plain Carbon Steel [Volume 6, Issue 2, 2019, Pages 75-80]
Ghasemi, Mohammad Improving Prediction of Compressive Strength of Rectangular/Square (R/S) FRP-Confined Concrete Using Machine Learning [Volume 13, Issue 2, 2026, Pages 283-304]
Ghasemi, Mohsen Sensitivity Analysis of Vibrating Laminated Composite Rec-tangular Plates in Interaction with Inviscid Fluid Using EFAST Method [Volume 7, Issue 2, 2020, Pages 219-231]
Ghasemi Ghalebahman, Ahmad Delamination Analysis in Composite Root of a Carbon-Layer Reinforced Wind Turbine Blade [Volume 6, Issue 1, 2019, Pages 9-18]
Ghasemi Ghalebahman, Ahmad Evaluation of the Effect of polyethylene/SMR20 Hybrid Nanocomposites Reinforced with Basalt Fibers and Graphene using RSM [Volume 13, Issue 2, 2026, Pages 401-414]
Ghashochi-Bargh, Hadi Vibration Optimization of Fiber-Metal Laminated Composite Shallow Shell Panels Using an Adaptive PSO Algorithm [Volume 4, Issue 2, 2017, Pages 99-110]
Ghavanloo, Esmaeal Buckling Analysis of Spherical Composite Panels Reinforced by Carbon Nanotube [Volume 2, Issue 2, 2015, Pages 135-144]
Ghazavi, Mohammad RezaFree Vibration Analysis of Composite Plates with Artificial Springs by Trigonometric Ritz Method [Volume 1, Issue 1, 2014, Pages 61-70]
GHENIMI, Mohamed THEORETICAL MODELS FOR COMPOSITE BEAMS AND PLATES, SANDWICH AND FGM: A REVIEW OF ESL, LAYERWISE AND CUF APPROACHES [(Articles in Press)]
Ghiasvand, Mohsen Molecular Dynamic Investigation of Graphene Oxide Presence and Three Experimental Distribution Methods in Reinforced Epoxy-Based Nanocomposites [Volume 12, Issue 1, 2025, Pages 115-128]
Ghoddosian, Ali The Effect of Different Weighting Ratios, Length, and Thickness on Weighted Sum of the First Natural Frequency and Critical Buckling Load for a Laminated Composite Circular Cylindrical Shell [Volume 8, Issue 1, 2021, Pages 87-98]
Ghods, H. Effect of Particle Size on the Structural and Mechanical Properties of Al–AlN Nanocomposites Fabricated by Mechanical Alloying [Volume 2, Issue 2, 2015, Pages 73-78]
Gholhaki, Majid Damage Detection in Concrete Filled Tube Columns Based on Experimental Modal Data and Wavelet Technique [Volume 7, Issue 2, 2020, Pages 245-254]
Ghorai, Anjana Propagation Behavior of Love-Type Waves in a Poro-elastic Medium using Staggered Grid Finite Difference Scheme [Volume 8, Issue 2, 2021, Pages 359-365]
Ghorbani, Saeed Enhancing Mechanical Properties of Polypropylene Composites Reinforced with Date Palm Fiber Using Maleic Anhydride Grafted Polypropylene as a Compatibilizer [Volume 13, Issue 1, 2026, Pages 211-226]
Ghorbanpour Arani, Ali Vibration Analysis of Sandwich Beams with Magnetorheological Elastomer Core and FGM Graphene Nanoplatelet-Reinforced Polymer Faces on Viscoelastic Foundation [Volume 12, Issue 3, 2025, Pages 447-464]
Ghorbanpour-Arani, Ali Biaxial Buckling and Bending of Smart Nanocomposite Plate Reinforced by CNTs using Extended Mixture Rule Approach [Volume 1, Issue 1, 2014, Pages 17-26]
Ghorbanzadeh Ahangari, Morteza Investigation of Capsulated Epoxy and DCPD in Epoxy Based Self-healing Composites - DFT Calculation and Experimental Analysis [Volume 5, Issue 2, 2018, Pages 165-171]
Ghorbanzadeh-Ahangari, Morteza Effect of Curvature on the Mechanical Properties of Graphene: A Density Functional Tight-binding Approach [Volume 3, Issue 1, 2016, Pages 9-13]
Ghugal, Y.M. Static Flexure of Soft Core Sandwich Beams using Trigonometric Shear Deformation Theory [Volume 2, Issue 1, 2015, Pages 45-53]
Ginka, Ranga Janardhana Shift-Robust Machine Learning Surrogate with Importance-Weighted Conformal Prediction for Vibration and Inverse Design of Functionally Graded Porous Tapered Beams [(Articles in Press)]
G L, Dushyanthkumar Optimization of Machining parameters of Titanium Di-Oxide (TiO2) and Graphite Reinforced Aluminum Alloy Metal Matrix by Taguchi Grey Relational Analysis Technique [(Articles in Press)]
Goel, Ankur Investigation of the Mechanical and Tribological Behaviour of Al Alloy and Al/ZrO2Ex-Situ Nano Composites [Volume 14, Issue 1, 2027, Pages 19-26]
Gohil, Piyush Artificial Neural Network (ANN) Approach to Predict Tensile Properties of Longitudinally Placed Fiber Reinforced Polymeric Composites including Interphase [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 353-360]
Golestanian, Hossein Molecular Dynamics Simulation of Functional and Hybrid Epoxy Based Nanocomposites [Volume 7, Issue 2, 2020, Pages 233-243]
Golkarian, Amir Reza A New Numerical Solution of 3D Nonlinear Thermo-Mechanical Bending Analysis of Functionally Graded Annular Thick Plate Under Asymmetric Boundary Conditions and Non-Uniform Local Loading [Volume 12, Issue 3, 2025, Pages 585-596]
Golmakani, M.E. Buckling Analysis of Functionally Graded Cylindrical Shells Under Mechanical and Thermal Loads by Dynamic Relaxation Method [Volume 7, Issue 2, 2020, Pages 297-311]
Golmakani, M.E. Buckling Analysis of Nano Composite Plates Based on Combination of the Incremental Load Technique and Dynamic Relaxation Method [Volume 8, Issue 1, 2021, Pages 133-148]
Golmakani, Mohammad Esmaiel Experimental and Numerical Study on the Strength of Repaired Steel Pipes with Composite Patches under Internal Pressure [Volume 10, Issue 2, 2023, Pages 437-448]
Golmakani, Mohammad Esmaiel Nonlinear Dynamic Analysis of Annular FG Porous Sandwich Plates Reinforced by Graphene Platelets [Volume 11, Issue 1, 2024, Pages 131-148]
Gombi, Shrinivas Effect of Delamination on the Natural Frequency of Fiber Metal Laminate under Various Conditions [Volume 14, Issue 1, 2027, Pages 255-265]
Goodarzi, Hamed Microwave-Assisted Two-Step Sintering of Al/8wt%TiC Composite Prepared by Powder Metallurgy [Volume 8, Issue 2, 2021, Pages 291-298]
Govindan Radhakrishnan, Gopinath Mechanical Testing of Novel and Conventional Geopolymer Brick Dried under Passive Solar Dryer with Ferric Chloride Dihydrate as Phase Change Material [Volume 13, Issue 1, 2026, Pages 23-35]
Govindhan Radhakrishnan, Rajesh Kanna Optimization of AA6351-SiC-B4C Hybrid Composites in Wire EDM Using Grey Relation Technique [Volume 11, Issue 2, 2024, Pages 385-400]
Govindhan Radhakrishnan, Rajesh Kanna Mechanical Testing of Novel and Conventional Geopolymer Brick Dried under Passive Solar Dryer with Ferric Chloride Dihydrate as Phase Change Material [Volume 13, Issue 1, 2026, Pages 23-35]
Gupta, Sneha Initial Buckling Behavior of Elastically Supported Rectangular FGM Plate based on Higher Order Shear Deformation Theory via Spline RBF Method [Volume 11, Issue 1, 2024, Pages 59-72]
Gupta, Sneha Engineering Behavior of Municipal Solid Waste Incinerated Ash with Compressible Soil: An Approach Towards the Waste Utilization & Stabilization of Compressible Soil [Volume 12, Issue 1, 2025, Pages 85-96]
Gupta, Sneha Strength Behavior of Soft Soil Treated with Municipal Solid Waste Incineration Ash and Nano Zeolite [Volume 13, Issue 2, 2026, Pages 305-317]
Gururaj, Chandran A Review of Research Outcomes on Fabrication Methods and Investigations for Evaluating Fracture Behavior of Aluminum Metal Matrix Composites with its Applications [Volume 8, Issue 2, 2021, Pages 347-358]
Gurusamy, Selvakumar Effect of Aspect Ratio on the Workability of AA6082/Metakaolin/Nano Silicon Nitride Composites: An Experimental Investigation and Predictive Modeling using RSM and ANN [Volume 14, Issue 1, 2027, Pages 217-236]
H
H, Eramma Influence of plate thickness and mineral admixtures on Flexural behavior of RC slab – An Experimental Investigation. [(Articles in Press)]
Habibi, Nabard Transient Thermal Stresses Analysis in a FPGM Cylinder [Volume 6, Issue 2, 2019, Pages 81-94]
Habibnejad Korayem, Moharram Study of Laminated Composite MEMS and NEMS Performance in Nano Metric Operations [Volume 4, Issue 1, 2017, Pages 19-31]
Hadji, Lazreg Numerical and Analytical Investigation of Free Vibration Behavior of Porous Functionally Graded Sandwich Plates [Volume 12, Issue 3, 2025, Pages 555-568]
Hadj Meliani, Mohammed Finite Element Analysis and Optimization of the Composite Plate Subjected to Close-Range Explosion [Volume 14, Issue 1, 2027, Pages 123-134]
Haftchenari, H. Size Effect on the Damaged Areas of Glass/Epoxy Structures under Low Velocity Impact [Volume 1, Issue 2, 2014, Pages 81-85]
Haghighatkhah, Amir RezaMechanical Properties of Graphene/Epoxy Nanocomposites under Static and Flexural Fatigue Loadings [Volume 1, Issue 1, 2014, Pages 1-7]
Haghighi, Mahmoud Molecular Dynamics Simulation of Functional and Hybrid Epoxy Based Nanocomposites [Volume 7, Issue 2, 2020, Pages 233-243]
Hajialimohammadi, Alireza Effects of Cooling Conditions and Machining Parameters on Thrust Force, Surface Roughness, and Hole Quality in Machining of Fiber Metal Laminates [Volume 12, Issue 3, 2025, Pages 671-683]
Hajinejad Sorkhi, Mohsen Analytical and Numerical Solution of Heat Transfer Equation in Rectangular Composite Fins [Volume 9, Issue 1, 2022, Pages 199-211]
Hamidi, S.M. An Analytical Study on Effects of adding Nanoparticles to Water and Enhancement in Thermal Properties Based on Falkner-Skan Model [Volume 1, Issue 1, 2014, Pages 27-35]
Hamza, Waleed Hamed Investigation of Mechanical Properties for Blend Epoxy-Polysulfide Reinforced with Woven Carbon and Glass Fiber [Volume 13, Issue 1, 2026, Pages 185-195]
Hariharan, Sreeram Optimization of AA6351-SiC-B4C Hybrid Composites in Wire EDM Using Grey Relation Technique [Volume 11, Issue 2, 2024, Pages 385-400]
Harwande, S. Quick Review and Assessment of Thermal Stress Analyses for Exact and Assumed Temperature Distribution for Composite and Sandwich Laminates [Volume 10, Issue 2, 2023, Pages 343-362]
Hasanabadi, Mohammad Production and Investigation of Natural Zeolite-TiO2/CuO Nanoparticles Composite [Volume 10, Issue 1, 2023, Pages 205-210]
Hasanifard, Mohammad Machining Behavior of Al-MMC Reinforced with Hybrid Additives: Effects of Cutting Parameters – A Taguchi Approach [Volume 14, Issue 1, 2027, Pages 165-180]
Hassan, Md Mehadi Material Mechanical Properties Prediction of Layer with Multidirectional Fiber Ply Reinforced Polymer Matrix Composites [Volume 9, Issue 2, 2022, Pages 221-227]
Hayati, Sajad Investigation of Tensile Characteristics of an Epoxy Matrix Com-posite with Uni-Directional and Hybrid Tissue Natural Hemp Fibers [Volume 6, Issue 2, 2019, Pages 181-190]
Hayati, Sajad Artificial Intelligence Method for Predicting Mechanical Properties of Sand/Glass Reinforced Polymer: a New Model [Volume 8, Issue 2, 2021, Pages 245-268]
Hedayati, F. An Analytical Study on Effects of adding Nanoparticles to Water and Enhancement in Thermal Properties Based on Falkner-Skan Model [Volume 1, Issue 1, 2014, Pages 27-35]
Heidari-Rarani, Mohammad Modal Characteristics of Composite Beams with Single Delamination- A Simple Analytical Technique [Volume 1, Issue 2, 2014, Pages 97-106]
Hemalatha, Kulandhaivel Propagation of Shear Horizontal Wave at Magneto-Electro-Elastic Structure Subjected to Mechanically Imperfect Interface [Volume 12, Issue 1, 2025, Pages 97-114]
Hemmatian, Hossein Optimization of Hybrid Composite Laminate Based on the Frequency using Imperialist Competitive Algorithm [Volume 1, Issue 1, 2014, Pages 37-48]
Hemmatian Soorki, Ali Experimental and Numerical Investigation of Reinforcement Sheet Effect on the Bending Strength of Corrugated Composite Panels [Volume 8, Issue 1, 2021, Pages 1-13]
Heshmati, Mahmood Artificial Intelligence Method for Predicting Mechanical Properties of Sand/Glass Reinforced Polymer: a New Model [Volume 8, Issue 2, 2021, Pages 245-268]
Heydari, Mahmoud Influence of Hydroxyl-Terminated Polybutadiene (HTPB) on the Mechanical and Electrical Properties of Epoxy Phenol Novolac Resin [Volume 13, Issue 2, 2026, Pages 381-390]
Heydari Beni, Mohsen Thermal Buckling and Thermal Induced free Vibration Analysis of Perforated Composite Plates: a Mathematical Model [Volume 7, Issue 1, 2020, Pages 15-23]
Heydari Beni, Mohsen Free Vibration Analysis of Combined Cylindrical-Conical Composite Shells using First-Order Shear Deformation Theory [Volume 8, Issue 2, 2021, Pages 269-282]
Heydari Beni, Mohsen Buckling Analysis of Composite Grid-Stiffened Cylindrical Shells Using a Generalized Equivalent Single Layer Theory [Volume 8, Issue 2, 2021, Pages 455-466]
Homayooni, Ahmad Study of Laminated Composite MEMS and NEMS Performance in Nano Metric Operations [Volume 4, Issue 1, 2017, Pages 19-31]
Honarpisheh, Mohammad Experimental Investigation of Residual Stress Measurement on Cold Roll Bonded Al/Cu Composite by Incremental Hole-Drilling Method [Volume 13, Issue 1, 2026, Pages 1-11]
Hosanagara Lokesha, Nandeesh Influence of Kevlar on Impact Damage Assessment of Carbon Fiber Hybrid Composite Laminate [Volume 12, Issue 3, 2025, Pages 497-505]
Hoseini, Seyed Hamed On the Nonlinear Dynamics of an Energy Harvesting Device Based on Magnetostriction [Volume 8, Issue 1, 2021, Pages 33-40]
Hoseinpour Gollo, Mohammad Effect of Microstructural Features and Al2O3 Doping on Aging Resistance, Mechanical Properties and Crack Propagation in 3Y-TZP Plate Ceramics for Dental Restorations: A Comprehensive Peridynamics Study [Volume 12, Issue 3, 2025, Pages 523-554]
Hoseinpour Gollo, Mohammad Investigating the Effective Factors for Enhancing the Optimization of Al6061/8Al2O3-3WC-8SiC Composite Using the Friction Stir Process [Volume 13, Issue 2, 2026, Pages 371-379]
Hoseinpour Gollo, Mohammad 2D Bond-Based Peridynamic Simulation of Phase Transformation in 3Y-TZP Dental Ceramics Using ABAQUS [Volume 14, Issue 1, 2027, Pages 27-39]
Hossain, M. R.An Experimental and Numerical Approach of Polymer Composites Based on Jute-Bamboo Natural Fiber [Volume 9, Issue 1, 2022, Pages 105-113]
Hosseini, Mehdi Elasto-dynamic Response Analysis of a Curved Composite Sandwich Beam Subjected to the Loading of a Moving Mass [Volume 7, Issue 2, 2020, Pages 347-354]
Hosseini, Mehdi An Analytical Study on the Indentation of a Layered Composite Beam and its Utilization in Low Velocity Impact Response [Volume 9, Issue 1, 2022, Pages 155-162]
Hosseini, Mohammad A Case Study on the Influence of Friction Coefficient and Rotational Speed on Transient Thermoelastic Response of FGM Rotating Cylinder [Volume 9, Issue 2, 2022, Pages 399-408]
Hosseini Farrash, Seyyed Mahdi Experimental Study on Amine-Functionalized Carbon Nanotubes’ Effect on the Thermomechanical Properties of CNT/Epoxy Nano-composites [Volume 5, Issue 1, 2018, Pages 41-48]
Hosseinpour, Komeil Creep Strain and Stress Analysis in Laminated Composite Pres-sure Vessels [Volume 5, Issue 2, 2018, Pages 141-147]
Hosseinpour, Komeil Effects of Magnetic Field in Creep Behavior of Three-Phase Laminated Composite Cylindrical Shells [Volume 6, Issue 1, 2019, Pages 51-56]
Hosseinpour, Komeil Thermal Variations of Thermo-Mechanical Loading Effects on Creep Stress and Strain Distribution in Multi-layered Composite Cylinder [Volume 9, Issue 1, 2022, Pages 115-123]
H Soudmand, Behzad Numerical Simulation of a Hybrid Nanocomposite Containing Ca-CO3 and Short Glass Fibers Subjected to Tensile Loading [Volume 4, Issue 2, 2017, Pages 117-125]
I
Idihya, Youssef Structural Evaluation of a Horizontal Axis Wind Turbine Composite Blade Using a Monitored Testing Bench [(Articles in Press)]
Iftitah, R. Physical and Mechanical Properties of Biodegradable Film from Taro Starch (Xanthosoma Sagittifolium) and Duck Bone Gelatin [Volume 9, Issue 2, 2022, Pages 213-220]
Ighalo, J. O.Mechanical, Crystallographic, and Microstructural Analysis of Polymer Composites Developed from Iron Filings and Polystyrene Wastes [Volume 9, Issue 1, 2022, Pages 137-145]
Ihueze, Christopher Chukwutoo The Graft of ANN-FEM Technique in Macro-mechanics of Multi-oriented Natural Fiber/Polyester Laminates [Volume 8, Issue 1, 2021, Pages 51-68]
Imani, Kazem Crashworthiness Study of an Innovative Helmet Liner Composed of an Auxetic Lattice Structure and PU Foam [Volume 9, Issue 1, 2022, Pages 25-35]
Inala, Ramu Influence of Hygrothermal Environment and FG Material on Natural Frequency and Parametric Instability of Plates [Volume 7, Issue 1, 2020, Pages 89-101]
Iourzikene, Zouhir Failure Probability Analysis of Composite Pressure Tanks Using Subset Simulation [Volume 11, Issue 2, 2024, Pages 363-374]
Iqbal, Zafar Experimental Investigation and Simulation of Electro-Mechanical Behaviour of Hybrid Sandwich Composite Radomes for Aerospace Applications [Volume 11, Issue 2, 2024, Pages 401-412]
Irani Rahaghi, Mohsen Vibration Response of a Sandwich Higher-Order Micro Beam based on Shear and Normal Deformation Theory on Kerr Elastic Foundation with Thickness Stretching Effect [Volume 12, Issue 3, 2025, Pages 645-670]
Irawan, Yudy Surya Pandanus Tectorius Fiber/ Rice Husk Powder as Green Reinforcement for Lightweight Composites: Evaluation of Impact Strength Properties and Thermal Stability [Volume 12, Issue 3, 2025, Pages 695-706]
Islam, M. T.An Experimental and Numerical Approach of Polymer Composites Based on Jute-Bamboo Natural Fiber [Volume 9, Issue 1, 2022, Pages 105-113]
Ismail, Ismail Enhancing the Performance of High-Loaded Coconut Shell Biocomposites with NaOH Treatment [(Articles in Press)]
Ismail, Nur Ikhsan Mechanical Properties of Sandwich Composite with Polyurethane Core Reinforced by Biaxial Geogrid and Carbon-Glass Fiber/Polyester as Skin[Volume 14, Issue 1, 2027, Pages 180-189]
J
Jabbari, Ali Parametric Investigation of Particle Movements in Ultrasonic Levitation Process Using Piezoelectric Materials [Volume 13, Issue 2, 2026, Pages 357-369]
Jabbari, Amirhossein Experimental Investigation of FGM Dental Implant Properties Made from Ti/HA Composite [Volume 4, Issue 3, 2017, Pages 233-237]
Jabbarzadeh, Mehrdad A New Numerical Solution of 3D Nonlinear Thermo-Mechanical Bending Analysis of Functionally Graded Annular Thick Plate Under Asymmetric Boundary Conditions and Non-Uniform Local Loading [Volume 12, Issue 3, 2025, Pages 585-596]
Jafari, Ali Asghar Active control of free and forced vibration of rotating laminated composite cylindrical shells embedded with magnetostrictive layers based on classical shell theory [Volume 7, Issue 2, 2020, Pages 355-369]
Jafari, Ali Asghar Nonlinear Vibration of Rotating Laminated Composite Cross-ply Cylindrical Shell on Nonlinear Rotating Elastic Foundation [Volume 9, Issue 2, 2022, Pages 317-334]
Jafari, Mohammad Optimization of infinite composite plates with quasi-triangular holes under in-plane loading [Volume 5, Issue 2, 2018, Pages 115-130]
Jafari, Seyed Mohammad Health Monitoring for Composite under Low-Cycle Cyclic Loading, Considering Effects of Acoustic Emission Sensor Type [Volume 6, Issue 1, 2019, Pages 19-26]
Jafari Fesharaki, Javad Mechanical Behavior and Optimization of Functionally Graded Hollow Cylinder with an Elliptic Hole [Volume 7, Issue 2, 2020, Pages 189-201]
Jafari Mofrad-Taheri, M. Static and Free Vibration Analyses of Functionally Graded Nano-composite Plates Reinforced by Wavy Carbon Nanotubes Resting on a Pasternak Elastic Foundation [Volume 3, Issue 2, 2016, Pages 123-135]
Jafarinezhad, Mohammad Reza Compression Analysis of Hollow Cylinder Basalt Continuous Filament Epoxy Composite Filled with Shape Memory Wire [Volume 4, Issue 3, 2017, Pages 225-232]
Jafar Tafreshi, Majid Nanocomposite Thin Film of KTP Nanoparticles: Synthesis, Characterization and Optical Applications [Volume 13, Issue 2, 2026, Pages 465-473]
Jaferzadeh Khoramabadian, Ali Asghar Investigation of Tensile Characteristics of an Epoxy Matrix Com-posite with Uni-Directional and Hybrid Tissue Natural Hemp Fibers [Volume 6, Issue 2, 2019, Pages 181-190]
Jaiswal, Soumyajeet Design and Development of a Pine Needle Briquetting Machine for the Uttarakhand Region of India [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 293-303]
Jam, J.E. Mechanical Properties of CNT-Reinforced Polymer Nano-composites: A Molecular Dynamics Study [Volume 3, Issue 2, 2016, Pages 113-121]
Jamshiddoust, Asghar Investigation of Vibration Energy Harvesting in Multilayer Composite Plates with Anisotropic Piezoelectric Patches [Volume 12, Issue 1, 2025, Pages 223-234]
Janati Idrissi, Khalid THEORETICAL MODELS FOR COMPOSITE BEAMS AND PLATES, SANDWICH AND FGM: A REVIEW OF ESL, LAYERWISE AND CUF APPROACHES [(Articles in Press)]
Jangi, Reza Experimental Study of Buckling of Reinforced Conical Composite Shell Under Hydrostatic Loading [Volume 9, Issue 2, 2022, Pages 359-366]
Janmanee, Pichai Effect of Annealing on Tensile Strength of 3D Printed PLA with Material Extrusion [Volume 12, Issue 3, 2025, Pages 465-472]
Jatti, Vijay Kumar Tensile, Flexural, and Impact Strength Analysis of a 3D Printed Carbon Fiber Reinforced Nylon Filament [Volume 12, Issue 3, 2025, Pages 615-627]
Jatti, Vijay Kumar Lattice Structure Optimization of 3D Printed TPMS under Different Loading Conditions Using Regression Machine Learning [Volume 12, Issue 3, 2025, Pages 597-613]
Jatti, Vijaykumar Shivashankar Quantum Machine Learning Approach for the Prediction of Surface Roughness in Additive Manufactured Specimens [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 425-433]
Javadi, Masoud EExperimental Evaluation of the Effect of Combining a Two-Phase Nano-Composite Containing AL2O3 and NbC in a Surface-Coated Resin Matrix: a Study Based on Dielectric Losses and Radar Reflectance [Volume 14, Issue 1, 2027, Pages 135-150]
Javadian, Mohammad Artificial Intelligence Method for Predicting Mechanical Properties of Sand/Glass Reinforced Polymer: a New Model [Volume 8, Issue 2, 2021, Pages 245-268]
Javanbakht, Alireza Dynamic Analysis of Functionally Graded Nanobeams Using Various Shear Deformation Theories Based on Doublet Mechanics [Volume 14, Issue 1, 2027, Pages 75-97]
Javanmiri, Saeed Artificial Intelligence Method for Predicting Mechanical Properties of Sand/Glass Reinforced Polymer: a New Model [Volume 8, Issue 2, 2021, Pages 245-268]
Jawaid, S. M. AliFlexural Behaviour of Nanocomposite Plate with CNT Distribution and Agglomeration Effect [Volume 10, Issue 1, 2023, Pages 123-136]
Jawaid, S. M. AliFree Vibration Response of Agglomerated Carbon Nanotube-Reinforced Nanocomposite Plates [Volume 10, Issue 1, 2023, Pages 167-194]
Jawaid, S. M. AliResponse of Agglomerated SWCNT Reinforced Nanocomposite Plate under Hygro-Thermal Loading [Volume 11, Issue 1, 2024, Pages 11-40]
Jayappa, Kumaraswamy Effect of Chilling & B4C content on Machining Efficiency and Surface Quality in Wire-Cut Machining of Aluminum Matrix Chilled Composites [Volume 11, Issue 2, 2024, Pages 341-350]
Jayasankar, Prabhakaran Modeling and Numerical Prediction on Mechanical Behaviors of Hybrid Fiber Reinforced Polymer Bio Composites Using Fuzzy Logic Algorithm [Volume 12, Issue 1, 2025, Pages 199-210]
Jeevan, Ashok Kumar Jeevan Mechanical Testing of Novel and Conventional Geopolymer Brick Dried under Passive Solar Dryer with Ferric Chloride Dihydrate as Phase Change Material [Volume 13, Issue 1, 2026, Pages 23-35]
Jena, Hemalata Dielectric and Thermal Behaviour Analysis of Epoxy Composites Filled with Date Seed Particles Using Finite Element Method [Volume 13, Issue 2, 2026, Pages 347-355]
Jha, Vinay Chandra Polyester/Kota Stone Dust Composite: A Comprehensive Investigation of Mechanical and Sliding Wear Properties [Volume 11, Issue 2, 2024, Pages 375-384]
Jhala, Ramdevsinh LalubhaMechanical Characterization of Glass-Basalt Hybrid Composites with Different Fiber Weight Fraction [Volume 11, Issue 2, 2024, Pages 295-308]
Jhala, Ramdevsinh Lalubha Experimental Evaluation of Low-Velocity Impact Performance of Glass–Basalt Hybrid Composites: Influence of Fiber Weight Fraction and Impact Energy Levels [Volume 14, Issue 1, 2027, Pages 267-282]
John, Jerold John Britto Influence of Process Parameters on the Mechanical Properties of Carbon Fibre Reinforced PETG [Volume 13, Issue 1, 2026, Pages 171-184]
Joladarashi, Sharnappa Comparative Study on Impact Responses of Sandwich Composites with Stiff and Compliant Core Materials [Volume 12, Issue 3, 2025, Pages 483-496]
José Trujillo, Eduardo Interlaminar Shear Failure Monitoring in GFRPs Using Graphene Nanoplatelets [Volume 14, Issue 1, 2027, Pages 191-197]
Joshi, Ayush Design and Development of a Pine Needle Briquetting Machine for the Uttarakhand Region of India [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 293-303]
K
K, Reena Influence of plate thickness and mineral admixtures on Flexural behavior of RC slab – An Experimental Investigation. [(Articles in Press)]
Kabiri, Ali Sensitivity Analysis of Fiber-Reinforced Lamina Micro-Electro-Mechanical Switches with Nonlinear Vibration Using a Higher Order Hamiltonian Approach [Volume 5, Issue 1, 2018, Pages 25-39]
Kabiri Ataabadi, Abdulreza Experimental and Numerical Investigation of Reinforcement Sheet Effect on the Bending Strength of Corrugated Composite Panels [Volume 8, Issue 1, 2021, Pages 1-13]
Kachhot, Deepak Mechanical Properties and Water Absorption of Epoxy Composites Reinforced with Treated Long Hair Fiber for Sustainable Manufacturing [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 379-392]
Kader, Ekhlas EdanStructural Analysis of Composite Material Disk Brakes [(Articles in Press)]
Kadkhodayan, Mehran Application of Bi-Directional Functionally Graded Material Model for Free Vibration Analysis of Rotating Euler-Bernoulli Nanobeams [Volume 8, Issue 2, 2021, Pages 389-399]
Kadum Njim, Emad Numerical and Analytical Investigation of Free Vibration Behavior of Porous Functionally Graded Sandwich Plates [Volume 12, Issue 3, 2025, Pages 555-568]
Kafi, Mohamad Ali Investigation of Nonlinear Behavior of Composite Bracing Structures with Concrete Columns and Steel Beams (RCS) Applying Finite Element Method [Volume 7, Issue 1, 2020, Pages 25-37]
Kaleemulla K, Mohamed Effect of Aging on Fracture Toughness of Al6061-Graphite Particulate Composites [Volume 6, Issue 2, 2019, Pages 139-146]
Kallannavar, Vinayak Active Vibration Control of Laminated Composite Beam Operating in Thermal Environment using PZT-5H Patches [Volume 9, Issue 2, 2022, Pages 387-398]
Kamali, Fahimeh A Comparative Study on the Microstructure and Mechanical Properties of Al-Si-Cu/1wt %NCP Composites after T6 Heat Treatment [Volume 7, Issue 1, 2020, Pages 129-136]
Kamali, Kamran A Novel Method for Considering Interlayer Effects between Graphene Nanoribbons and Elastic Medium in Free Vibration Analysis [Volume 7, Issue 1, 2020, Pages 79-88]
Kami, Abdolvahed An Investigation on Three-Point Bending of Foam-Filled Double Tubes and Parameter Optimization Using Response Surface Methodology [Volume 8, Issue 1, 2021, Pages 41-50]
Kami, Abdolvahed Deposition of an Al/SiC Composite Coating on Steel by Friction Surfacing: Corrosion and Wear Properties [Volume 9, Issue 2, 2022, Pages 287-296]
Kami, Abdolvahed Tensile and Flexural Properties of 3D-Printed Polylactic Acid/Continuous Carbon Fiber Composite [Volume 10, Issue 2, 2023, Pages 407-418]
Kannapiran, K. Optimization of Wear Behaviour on Mg-TiO2 Nanocomposite Using Taguchi Grey Relational Analysis [Volume 10, Issue 1, 2023, Pages 151-156]
Kanoria, M. Elasto-Thermodiffusive Response in a Two-Dimensional Transversely Isotropic Medium [Volume 6, Issue 2, 2019, Pages 95-104]
Kanoria, M. Thermoelastic Interaction in a Three-Dimensional Layered Sandwich Structure [Volume 5, Issue 2, 2018, Pages 187-198]
Kapitonova, Iuliia Climatic Testing of Polytetrafluoroethylene Based Composites [(Articles in Press)]
Karagaiah, Naveen Kumar Bannuru Reinforcement Surface Modification Effect on the Microstructure, Mechanical, and Tensile Fractography of Al2219 Alloy B4C Composites [Volume 13, Issue 1, 2026, Pages 197-210]
Karami, Hojat Improving the Performance of Porous Concrete Composites Using Zeolite as a Coarse Grain [Volume 5, Issue 2, 2018, Pages 157-163]
Karamooz, Mohammadreza Elastic analysis of Shrink-fitted Thick FGM Cylinders Based on Linear Plane Elasticity Theory [Volume 7, Issue 1, 2020, Pages 121-127]
Karamooz Mahdiabadi, Morteza Investigation of Vibration Energy Harvesting in Multilayer Composite Plates with Anisotropic Piezoelectric Patches [Volume 12, Issue 1, 2025, Pages 223-234]
Karamooz Mahdiabadi, Morteza Dynamic Analysis of Functionally Graded Nanobeams Using Various Shear Deformation Theories Based on Doublet Mechanics [Volume 14, Issue 1, 2027, Pages 75-97]
Karimi, Mahdi Fluid-Structure Interaction of Vibrating Composite Piezoelectric Plates Using Exponential Shear Deformation Theory [Volume 7, Issue 1, 2020, Pages 59-69]
Karimi, Mahdi Analytical Approach for Thermo-electro-mechanical Vibration of Piezoelectric Nanoplates Resting on Elastic Foundations based on Nonlocal Theory [Volume 6, Issue 2, 2019, Pages 117-129]
Karimi, Mahdi Free Vibration Analysis of Size-Dependent Multi-Layered Graphene Sheets Based on Strain Gradient Elasticity Theory [Volume 9, Issue 2, 2022, Pages 275-285]
Karimi, Mohamadhadi Non-Linear Analysis of Functionally Graded Sector Plates with Simply Supported Radial Edges Under Transverse Loading [Volume 6, Issue 1, 2019, Pages 65-74]
Karimzadeh, A. Atomic Simulation of Temperature Effect on the Mechanical Properties of Thin Films [Volume 2, Issue 1, 2015, Pages 31-38]
Karthikeyan, T. A. S-Parameter Analysis of Three-Layered Aperture Coupled Antenna with a Flame Retardant-4 Composite Material as Substrate for Biomedical Applications [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 361-369]
Karuppanan, Saravanan Finite Element Analysis of Mechanical Properties of Basalt-Carbon Epoxy Hybrid Laminates [Volume 9, Issue 2, 2022, Pages 263-274]
Kattimani, Subhaschandra Active Vibration Control of Laminated Composite Beam Operating in Thermal Environment using PZT-5H Patches [Volume 9, Issue 2, 2022, Pages 387-398]
Kaurase, Kalpit PInfluence of Filler Content on the Mechanical, Thermal, Moisture Absorption, and Biodegradability Properties of Bionanocomposite with Cellulosic Fibers Derived from Delonix Regia Fruits [Volume 11, Issue 1, 2024, Pages 73-86]
Kaveh, Amir Enhancing Strength of Nomex Sandwich Structures through the Utilization of Nano Clay Dispersed Epoxy Resin: A Study in Aerospace Applications [Volume 12, Issue 3, 2025, Pages 473-482]
Kaveh, Amir Experimental Investigation and RSM-Based Optimization of Phenolic/PTFE/SiC Composites [Volume 14, Issue 1, 2027, Pages 237-254]
Kazemi, Mohammad AliThick Sandwich Panel with Magnetorheological Core: Free Vi-brations Analysis utilizing a novel sinusoidal shear defor-mation theory [(Articles in Press)]
Kebritchi, Abass Molecular Dynamic Investigation of Graphene Oxide Presence and Three Experimental Distribution Methods in Reinforced Epoxy-Based Nanocomposites [Volume 12, Issue 1, 2025, Pages 115-128]
Keshavarzian, Mahdi Thick Sandwich Panel with Magnetorheological Core: Free Vi-brations Analysis utilizing a novel sinusoidal shear defor-mation theory [(Articles in Press)]
Keshavarzian, Mehdi High-order Analysis of Linear Vibrations of a ModeratleyThick Sandwich Panel With an Electrorheological Core [Volume 7, Issue 2, 2020, Pages 177-188]
Keshvari Tabatabaie, Fereshteh Sadat Investigation of Hardness, Morphology and Structural Analysis of NiCrBSi Composite Coating on Plain Carbon Steel [Volume 6, Issue 2, 2019, Pages 75-80]
Keykha, Amir Hamzeh Experimental investigation of the strength of glass fiber-reinforced concrete exposed to high temperature [Volume 5, Issue 2, 2018, Pages 103-113]
Keykha, Amir Hamzeh Strengthening of Deficient Steel Sections using CFRP Composite under Combined Loading [Volume 7, Issue 2, 2020, Pages 287-296]
Khademitab, Meisam Effects of Cooling Conditions and Machining Parameters on Thrust Force, Surface Roughness, and Hole Quality in Machining of Fiber Metal Laminates [Volume 12, Issue 3, 2025, Pages 671-683]
Khakbaz, Mohammad EExperimental Evaluation of the Effect of Combining a Two-Phase Nano-Composite Containing AL2O3 and NbC in a Surface-Coated Resin Matrix: a Study Based on Dielectric Losses and Radar Reflectance [Volume 14, Issue 1, 2027, Pages 135-150]
Khaldi, Mokhtar Experimental and Numerical Analyses of Alfa/Polyester Composite Under Three-Point Bending [Volume 12, Issue 1, 2025, Pages 211-222]
Khalil, Belakhdar Finite Element Analysis and Optimization of the Composite Plate Subjected to Close-Range Explosion [Volume 14, Issue 1, 2027, Pages 123-134]
Khalili, Ali Tensile and Flexural Properties of 3D-Printed Polylactic Acid/Continuous Carbon Fiber Composite [Volume 10, Issue 2, 2023, Pages 407-418]
Khalili, Mohammad Reza Compression Analysis of Hollow Cylinder Basalt Continuous Filament Epoxy Composite Filled with Shape Memory Wire [Volume 4, Issue 3, 2017, Pages 225-232]
Khalili, Seyed Mohammad Reza Nonlinear Behavior of Honeycomb Structure Under Large Deformations Using Absolute Nodal Coordinate Formulation and Periodic Homogenization [Volume 14, Issue 1, 2027, Pages 1-17]
Khalili, S. Mohammad Reza Investigation of Tensile Characteristics of an Epoxy Matrix Com-posite with Uni-Directional and Hybrid Tissue Natural Hemp Fibers [Volume 6, Issue 2, 2019, Pages 181-190]
Khalili, S.M.R. Accelerated Heat Aging Study of Phenolic/Basalt Fiber Reinforced Composites [Volume 3, Issue 1, 2016, Pages 1-7]
Khalili, S.M.R. The Effect of External Skin on Buckling Strength of Composite Lattice Cylinders Based on Numerical and Experimental Analysis [Volume 3, Issue 2, 2016, Pages 83-87]
Khalkar, Vikas Effect of Aspect Ratio on the Workability of AA6082/Metakaolin/Nano Silicon Nitride Composites: An Experimental Investigation and Predictive Modeling using RSM and ANN [Volume 14, Issue 1, 2027, Pages 217-236]
Khamsin, Thanasak Mechanical Properties of Hemp Fiber-Reinforced Polypropylene Composites for Drone Propeller Guard Application [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 271-277]
Khan, Sikander Initial Buckling Behavior of Elastically Supported Rectangular FGM Plate based on Higher Order Shear Deformation Theory via Spline RBF Method [Volume 11, Issue 1, 2024, Pages 59-72]
Khani, Mohammadreza Synthesis and Characterization of MgF2/Cu Coating on Aluminum Produced by Sputtering Technique [Volume 9, Issue 2, 2022, Pages 297-302]
Khanmohammadi, Erfan Achieving High Strength in Fe-Based Metallic Glass Reinforced Aluminum Matrix Composites through Combined Ball Milling and Spark Plasma Sintering [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 435-446]
Kharaman-Nia, Iman Experimental Study on Double-Walled Copper and Carbon/Epoxy Composite Tubes under the Axial Loading [Volume 1, Issue 2, 2014, Pages 71-79]
Kharate, Namrate A Comparative Study of Machine Learning Techniques for Predicting Mechanical Properties of Fused Deposition Modelling (FDM)-Based 3D-Printed Wood/PLA Biocomposite [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 261-270]
Kharrati, Khaled Thermomechanical and Physical Properties of Plaster Concrete Reinforced with Natural Fibers [Volume 10, Issue 2, 2023, Pages 295-308]
Khatibi, Mohammad Mahdi Vibration Analysis of Circular Single-Layer Graphene Sheet Using Finite Element Method [Volume 6, Issue 2, 2019, Pages 131-138]
Kheyroddin, Ali Investigation of Nonlinear Behavior of Composite Bracing Structures with Concrete Columns and Steel Beams (RCS) Applying Finite Element Method [Volume 7, Issue 1, 2020, Pages 25-37]
Kheyroddin, Ali Strengthening of One-Way Slabs Using Composite Laminates of HPFRCC Including Synthetic Fibers PPS [Volume 9, Issue 1, 2022, Pages 185-197]
Khirkhahan, Saeed Nanocomposite Thin Film of KTP Nanoparticles: Synthesis, Characterization and Optical Applications [Volume 13, Issue 2, 2026, Pages 465-473]
Khirzin, M. H.Physical and Mechanical Properties of Biodegradable Film from Taro Starch (Xanthosoma Sagittifolium) and Duck Bone Gelatin [Volume 9, Issue 2, 2022, Pages 213-220]
Khobragade, Pallavi Numerical and Analytical Investigation of Free Vibration Behavior of Porous Functionally Graded Sandwich Plates [Volume 12, Issue 3, 2025, Pages 555-568]
Khodabakhsh, Rasoul Nonlinear Vibration Analysis of the Composite Cable using Perturbation Method and the Green-Lagrangian Nonlinear Strain [Volume 6, Issue 1, 2019, Pages 27-34]
Khodadadi, Ali Molecular Dynamics Simulation of Functional and Hybrid Epoxy Based Nanocomposites [Volume 7, Issue 2, 2020, Pages 233-243]
Khodadadi, Mohammad Precision Closed-form Solution for Out-of-plane Vibration of Rectangular Plates via Trigonometric Shear Deformation Theory [Volume 3, Issue 1, 2016, Pages 31-43]
Khoddami Maraghi, Zahra Vibration Analysis of Sandwich Beams with Magnetorheological Elastomer Core and FGM Graphene Nanoplatelet-Reinforced Polymer Faces on Viscoelastic Foundation [Volume 12, Issue 3, 2025, Pages 447-464]
Khoramishad, Hadi Mechanical and Physical Properties of Glass-Fiber Reinforced Polymer Rods Manufactured by Different Pultrusion Methods [Volume 8, Issue 1, 2021, Pages 99-107]
Khorsand, Hamid On the Study of Mechanical Properties of Aluminum/Nano-Alumina Composites Produced via Powder Injection Molding [Volume 3, Issue 1, 2016, Pages 45-51]
Khorshidi, K. Analytical Solution for Sound Radiation of Vibrating Circular Plates coupled with Piezo-electric Layers [Volume 3, Issue 2, 2016, Pages 89-98]
Khorshidi, Korosh Free Vibration Analysis of Composite Plates with Artificial Springs by Trigonometric Ritz Method [Volume 1, Issue 1, 2014, Pages 61-70]
Khorshidi, Korosh Free Natural Frequency Analysis of an FG Composite Rectangular Plate Coupled with Fluid using Rayleigh–Ritz Method [Volume 1, Issue 2, 2014, Pages 131-143]
Khorshidi, Korosh Precision Closed-form Solution for Out-of-plane Vibration of Rectangular Plates via Trigonometric Shear Deformation Theory [Volume 3, Issue 1, 2016, Pages 31-43]
Khorshidi, Korosh Free Vibrations Analysis of Functionally Graded Rectangular Nano-plates based on Nonlocal Exponential Shear Deformation Theory [Volume 2, Issue 2, 2015, Pages 79-93]
Khorshidi, Korosh Free Vibration Analysis of Size-Dependent, Functionally Graded, Rectangular Nano/Micro-plates based on Modified Nonlinear Couple Stress Shear Deformation Plate Theories [Volume 4, Issue 2, 2017, Pages 127-137]
Khorshidi, Korosh Fluid-Structure Interaction of Vibrating Composite Piezoelectric Plates Using Exponential Shear Deformation Theory [Volume 7, Issue 1, 2020, Pages 59-69]
Khorshidi, Korosh Analytical Approach for Thermo-electro-mechanical Vibration of Piezoelectric Nanoplates Resting on Elastic Foundations based on Nonlocal Theory [Volume 6, Issue 2, 2019, Pages 117-129]
Khorshidi, Korosh Sensitivity Analysis of Vibrating Laminated Composite Rec-tangular Plates in Interaction with Inviscid Fluid Using EFAST Method [Volume 7, Issue 2, 2020, Pages 219-231]
Khorshidi, Korosh High-order Analysis of Linear Vibrations of a ModeratleyThick Sandwich Panel With an Electrorheological Core [Volume 7, Issue 2, 2020, Pages 177-188]
Khorshidi, Korosh Free Vibration Analysis of Size-Dependent Multi-Layered Graphene Sheets Based on Strain Gradient Elasticity Theory [Volume 9, Issue 2, 2022, Pages 275-285]
Khorshidi, Korosh Buckling Analysis of Sandwich Structures with Metamaterials Core Integrated by Graphene Nanoplatelets Reinforced Polymer Composite [Volume 10, Issue 1, 2023, Pages 1-10]
Khorshidi, Korosh Static Buckling and Free Vibration Analysis of Bi-Dimensional FG Metal Ceramic Porous Beam [Volume 11, Issue 1, 2024, Pages 149-158]
Khorshidi, Korosh Investigation of Free Vibration in Fluid-Loaded Cylindrical Shells with a Three-Layer Sandwich Wall and an Auxetic Central Layer [Volume 12, Issue 1, 2025, Pages 53-72]
Khorshidi, Korosh Nonlinear Free Vibration of Fluid-Filled Hyperelastic Cylindrical Shells Using Novozhilov Theory and Multiple Scales Method [(Articles in Press)]
Khosravi, H. Flexural Behavior of Fiber–Metal Laminates Reinforced with Surface-Functionalized Nanoclay [Volume 5, Issue 2, 2018, Pages 149-156]
Khostavan, Sepide Investigation of Capsulated Epoxy and DCPD in Epoxy Based Self-healing Composites - DFT Calculation and Experimental Analysis [Volume 5, Issue 2, 2018, Pages 165-171]
Khumsamor, Nawapol The Impact of Fiber Architecture on the Mechanical Properties of Hand Lay-up Reinforced Polyester Resin [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 393-400]
Kiani, Sina Buckling analysis of FML cylindrical shells under combined axial and torsional loading [Volume 7, Issue 2, 2020, Pages 263-270]
Kiarasi, Faraz Numerical Investigation on Thermal Post-buckling Of Annular Sector Plates Made of FGM Via 3D Finite Element Method [Volume 8, Issue 2, 2021, Pages 309-320]
K N, Arun Kumar Optimization of Machining parameters of Titanium Di-Oxide (TiO2) and Graphite Reinforced Aluminum Alloy Metal Matrix by Taguchi Grey Relational Analysis Technique [(Articles in Press)]
Kohandani, Reza A New Three-Dimensional Refined Higher-Order Theory for Free Vibration Analysis of Composite Circular Cylindrical Shells [Volume 6, Issue 2, 2019, Pages 201-223]
Kolivand, Mostafa Thick Sandwich Panel with Magnetorheological Core: Free Vi-brations Analysis utilizing a novel sinusoidal shear defor-mation theory [(Articles in Press)]
Konovalov, Dmitriy Effect of the Nature of Oxide Nanofillers on Changes in the Mechanical Properties of Epoxy Coatings under Thermal Cycling [Volume 10, Issue 1, 2023, Pages 195-204]
Koohestani, Hassan Synthesis and Characterization of MgF2/Cu Coating on Aluminum Produced by Sputtering Technique [Volume 9, Issue 2, 2022, Pages 297-302]
Koohestani, Hassan Production and Investigation of Natural Zeolite-TiO2/CuO Nanoparticles Composite [Volume 10, Issue 1, 2023, Pages 205-210]
Koohi Faegh Dehkourdi, Reza A Case Study on the Influence of Friction Coefficient and Rotational Speed on Transient Thermoelastic Response of FGM Rotating Cylinder [Volume 9, Issue 2, 2022, Pages 399-408]
Kori, S A Mechanical Characterization and Wear Behavior of Nano TiO2 Particulates Reinforced Al7075 Alloy Composites [Volume 7, Issue 1, 2020, Pages 71-78]
Kotasthane, Atharva M.Finite Element Analysis of Mechanical Properties of Basalt-Carbon Epoxy Hybrid Laminates [Volume 9, Issue 2, 2022, Pages 263-274]
Kouchakzadeh, M. A. Dynamic Characteristics of Joined Steel and Carbon Fiber-Reinforced Plastic Tubes: Experimental and Numerical Investigation [Volume 4, Issue 2, 2017, Pages 88-97]
Kozekanan, Behnam SalmanyThe Effect of Al Additive and Arc Melting Time on Synthesis of Ti3SiC2 MAX Phase using Ti/SiC/Al/Graphite [Volume 9, Issue 2, 2022, Pages 367-376]
Kozekanan, Behnam SalmanyThe Effect of Nano-B4C Additive on Microstructure and Mechanical Properties of Pressureless Sintering SiC Bodies [Volume 10, Issue 1, 2023, Pages 29-42]
Krishnabhaskar, Kalidindi Free Vibration Analysis of Simply Supported and Clamped Functionally Graded Rectangular Plate Using Coupled Displacement Field Method [Volume 12, Issue 1, 2025, Pages 73-84]
Krishna Bhaskar, k Free Vibration Analysis of Graphene Reinforced Laminated Composite Plates using Experimental Modal Testing [Volume 10, Issue 2, 2023, Pages 363-374]
Kukanur, Vijayendra Reinforcement Surface Modification Effect on the Microstructure, Mechanical, and Tensile Fractography of Al2219 Alloy B4C Composites [Volume 13, Issue 1, 2026, Pages 197-210]
Kulkarni, Atul A Comparative Study of Machine Learning Techniques for Predicting Mechanical Properties of Fused Deposition Modelling (FDM)-Based 3D-Printed Wood/PLA Biocomposite [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 261-270]
Kulkarni, Sanjay Kantrao Thermal Behaviour and Coupling Effects in Laminated Composite Beam Structures Using Refined Shear Deformation Theory [Volume 14, Issue 1, 2027, Pages 199-216]
Kulkarni, Satyabodh Madhav Comparative Study on Impact Responses of Sandwich Composites with Stiff and Compliant Core Materials [Volume 12, Issue 3, 2025, Pages 483-496]
Kulkarni, Sharawari PrafullaQuick Review and Assessment of Thermal Stress Analyses for Exact and Assumed Temperature Distribution for Composite and Sandwich Laminates [Volume 10, Issue 2, 2023, Pages 343-362]
Kulkarni, Vivek Vishnu Effect of Delamination on the Natural Frequency of Fiber Metal Laminate under Various Conditions [Volume 14, Issue 1, 2027, Pages 255-265]
Kumar, Anil Modeling and Experimental Validation of Carbon Fiber-Kevlar Honeycomb Core Sandwich Structure [Volume 13, Issue 1, 2026, Pages 69-82]
Kumar, Chandan A Meshfree Approach for Bending Analysis of Porous Rectangular FGM Plate Resting on Elastic Foundation [Volume 9, Issue 2, 2022, Pages 303-316]
Kumar, Dheeraj Analysis & Optimization of Wire-EDM Parameters for Dimensional Stability of AZ91 based Al2O3p/SiCp Hybrid Composite [(Articles in Press)]
Kumar, Halkur Siddagangaiah Reinforcement Surface Modification Effect on the Microstructure, Mechanical, and Tensile Fractography of Al2219 Alloy B4C Composites [Volume 13, Issue 1, 2026, Pages 197-210]
Kumar, Manoj Short Literature Survey on Fiber-Reinforced Hybrid Composites [Volume 11, Issue 2, 2024, Pages 425-452]
Kumar, Mohit Bearing Response Prediction in Hydrothermal Aged Carbon Fiber Reinforced Epoxy Composite Joints Using Machine Learning Techniques [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 329-338]
Kumar, Nathi VenuFree Vibration Analysis of 2D Functionally Graded Porous Beams Using Novel Higher-Order Theory [Volume 10, Issue 1, 2023, Pages 69-84]
Kumar, Rahul A Meshfree Approach for Bending Analysis of Porous Rectangular FGM Plate Resting on Elastic Foundation [Volume 9, Issue 2, 2022, Pages 303-316]
Kumar, Rahul Initial Buckling Behavior of Elastically Supported Rectangular FGM Plate based on Higher Order Shear Deformation Theory via Spline RBF Method [Volume 11, Issue 1, 2024, Pages 59-72]
Kumar, Rahul Meshfree Approach for the Torsional Analysis of Orthotropic and FGM Thin-Walled Open Sections [Volume 12, Issue 3, 2025, Pages 629-644]
Kumar, Santosh Short Literature Survey on Fiber-Reinforced Hybrid Composites [Volume 11, Issue 2, 2024, Pages 425-452]
Kumar, Santosh Propagation of Shear Horizontal Wave at Magneto-Electro-Elastic Structure Subjected to Mechanically Imperfect Interface [Volume 12, Issue 1, 2025, Pages 97-114]
Kumar, Santosh Effect of Ceramic Boron Carbide Particles Addition on the Mechanical and Microstructural Characteristics of Al7020 Alloy Composites [Volume 12, Issue 1, 2025, Pages 169-180]
Kumar, Saurabh Engineering Behavior of Municipal Solid Waste Incinerated Ash with Compressible Soil: An Approach Towards the Waste Utilization & Stabilization of Compressible Soil [Volume 12, Issue 1, 2025, Pages 85-96]
Kumar, Saurabh Strength Behavior of Soft Soil Treated with Municipal Solid Waste Incineration Ash and Nano Zeolite [Volume 13, Issue 2, 2026, Pages 305-317]
Kumar, Sekaran Sathees Enhancement of Mechanical Properties of Coir, Kapok, and Hemp Fiber-Reinforced Epoxy Composites for a Variety of Applications [Volume 13, Issue 2, 2026, Pages 271-281]
Kumar, Yajuvindra Effect of Elastically Restrained Edges on Free Transverse Vibration of Functionally Graded Porous Rectangular Plate [Volume 9, Issue 2, 2022, Pages 335-348]
Kumar, Yajuvindra Free Vibration and Buckling Analyses of Nanobeam Embedded in Pasternak Foundation [Volume 10, Issue 2, 2023, Pages 419-436]
Kumaraswamy, Jayappa Microstructure Study and Optimization of Hardness and Tensile Strength of AW2024/B4Cp Reinforced Composites Through Linear Regression [Volume 13, Issue 1, 2026, Pages 83-96]
Kumar Krishnappa, Ashok Effect of ON and OFF Axis Open Hole Tensile Testing of GFRP/Epoxy Composites [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 319-328]
Kumar Muniswamy, Thanuj Experimental Study of Woven Glass, Bamboo, and Jute Fibre Reinforced in Epoxy Composites [Volume 14, Issue 1, 2027, Pages 41-56]
Kumar Shivamadaiah Parvathamma, Praveen Experimental Study of Woven Glass, Bamboo, and Jute Fibre Reinforced in Epoxy Composites [Volume 14, Issue 1, 2027, Pages 41-56]
Kumbhar, Samir Influence of Basalt/Carbon/Steel Fibers Addition on Flexural and Vibration Characteristics of Epoxy Granite [(Articles in Press)]
Kumshikar, Radhakrishna RExperimental and Numerical Analysis of Woven Bamboo and Jute Fiber Reinforced in Epoxy Composites [Volume 11, Issue 1, 2024, Pages 103-118]
Kumshikar, Radhakrishna Rajashekhar Experimental Study of Woven Glass, Bamboo, and Jute Fibre Reinforced in Epoxy Composites [Volume 14, Issue 1, 2027, Pages 41-56]
Kureel, Saurabh Crashworthy Behavior of Plain Weave Glass/Epoxy Composite Tubes Containing Different Extents of Overlap of Dropped Plies [Volume 11, Issue 1, 2024, Pages 87-102]
L
Laichaoui, Ahmed Numerical Estimation of the Effective Mechanical Properties (EMP) of Steel AISI 4340 Fiber-Reinforced Concrete [Volume 14, Issue 1, 2027, Pages 151-163]
Laksanawati, T. A.Physical and Mechanical Properties of Biodegradable Film from Taro Starch (Xanthosoma Sagittifolium) and Duck Bone Gelatin [Volume 9, Issue 2, 2022, Pages 213-220]
Lakshmanan, Karthikeyan Studies on Progress of Aluminum Based Composites for Automotive Applications and its Damping Characteristics – A Review [Volume 12, Issue 1, 2025, Pages 25-42]
Lakshmanan, Karthikeyan An Overview of Progression and Recent Trends in Additively Manufactured AlSi10Mg Alloy through Scientometrics [Volume 12, Issue 3, 2025, Pages 707-726]
Lakshminarayana, Bharath Microstructure Study and Optimization of Hardness and Tensile Strength of AW2024/B4Cp Reinforced Composites Through Linear Regression [Volume 13, Issue 1, 2026, Pages 83-96]
Lal, Achchhe XFEM for Fracture Analysis of Centrally Cracked Laminated Plates Subjected to Biaxial Loads [Volume 8, Issue 1, 2021, Pages 213-234]
Lanwong, Tanakorn The Impact of Fiber Architecture on the Mechanical Properties of Hand Lay-up Reinforced Polyester Resin [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 393-400]
Lashgari, Hossein Investigating the Effective Factors for Enhancing the Optimization of Al6061/8Al2O3-3WC-8SiC Composite Using the Friction Stir Process [Volume 13, Issue 2, 2026, Pages 371-379]
Lazareva, Nadezhda Climatic Testing of Polytetrafluoroethylene Based Composites [(Articles in Press)]
Le, Quoc-Cuong Two-dimensional Elasticity Solutions For Analyzing Free Vibration Of Functionally Graded Porous Beams [Volume 12, Issue 1, 2025, Pages 235-248]
Liaghat, Gholam Hossein Investigation into The Behavior of Nano-composite Tubes at Ballistic Impact [Volume 4, Issue 3, 2017, Pages 207-210]
Liaghat, Gholam Hossein Experimental and Numerical Investigation on the Flexural Behavior of Composite-Reinforced Top-Hat Shape Beam [Volume 8, Issue 1, 2021, Pages 149-156]
Loghman, Abbas Thermoelastic Analysis of a Functionally Graded Simple Blade Using First-Order Shear Deformation Theory [Volume 7, Issue 1, 2020, Pages 147-155]
Loh-Mousavi, Mohsen Experimental and Numerical Investigation of Reinforcement Sheet Effect on the Bending Strength of Corrugated Composite Panels [Volume 8, Issue 1, 2021, Pages 1-13]
Lokantara, I Putu Optimizing Mahogany Peel Powder-Polyester Composites for Sustainable Automotive Interior Panels: Effects of Filler Content on Mechanical and Thermal Properties [Volume 13, Issue 2, 2026, Pages 439-450]
M
Madah, Zeinab Investigation of Nonlinear Behavior of Composite Bracing Structures with Concrete Columns and Steel Beams (RCS) Applying Finite Element Method [Volume 7, Issue 1, 2020, Pages 25-37]
Madah, Zeinab Strengthening of One-Way Slabs Using Composite Laminates of HPFRCC Including Synthetic Fibers PPS [Volume 9, Issue 1, 2022, Pages 185-197]
Madan, Royal Numerical and Analytical Investigation of Free Vibration Behavior of Porous Functionally Graded Sandwich Plates [Volume 12, Issue 3, 2025, Pages 555-568]
Madarapu, Anjaiah Multi-response Optimization while Drilling of Composite Laminate with Core Drill by Grey Entropy Fuzzy (GEF) Method [Volume 11, Issue 2, 2024, Pages 483-502]
Madeva, Nagaral Effect of Nickel Addition on the Coefficient of Thermal Expansion and Microstructural Characteristics of AA2024 and AA7175 Aluminum Alloys in As-Cast and Homogenized States [Volume 13, Issue 1, 2026, Pages 97-116]
Mafi, Mohammad Evaluation of hardness and wear resistance of nano-sized titanium-carbide-reinforced commercially cast aluminum alloy matrices [Volume 5, Issue 1, 2018, Pages 75-81]
Mahapatra, Deepak An Investigation of Stress and Deformation Behavior of Functionally Graded Timoshenko Beams subjected to Thermo-Mechanical Load [Volume 7, Issue 1, 2020, Pages 157-176]
Mahapatra, Deepak Higher Order Approximations for Bending of FG Beams Using B-Spline Collocation Technique [Volume 11, Issue 1, 2024, Pages 159-176]
Mahbod, Mahshid Crushing Analysis of Empty and Foam-Filled Cylindrical and Conical Corrugated Composite Tubes [Volume 6, Issue 1, 2019, Pages 35-44]
Mahdavi, Hamid Reza Damage Energy Evaluation in [55/-55]9 Composite Pipes using Acoustic Emission Method [Volume 2, Issue 2, 2015, Pages 127-134]
Mahdi, Akeel ZekiInvestigation of Thermal Fatigue Behavior for HDPE Composites Reinforced by Nano Alumina [Volume 11, Issue 2, 2024, Pages 335-340]
Mahesh, S. Assessment of Hydrostatic Stress and Thermo Piezoelectricity in a Laminated Multilayered Rotating Hollow Cylinder [Volume 8, Issue 1, 2021, Pages 77-86]
Mahesh, Vinyas Influence of Graphene Powder on the Physio-Mechanical Properties of Jute Reinforced Epoxy Composites for Automobile Applications [Volume 11, Issue 1, 2024, Pages 239-248]
Mahesh, Vinyas Development and Mechanical Characterization of Light Weight Fiber Metal Laminate using Jute, Kenaf and Aluminium [Volume 11, Issue 2, 2024, Pages 259-270]
Mahesh, Vishwas Statistical Approach of Determining the Effect of Cenosphere on the Tribological Behaviour of Jute Reinforced Polymer Based Composite [Volume 10, Issue 1, 2023, Pages 211-220]
Mahesh, Vishwas Thermo-Mechanical Characterization of Jute-Bamboo Hybrid Thermoplastic Polymer Matrix Composites with Different Stacking Sequences for Automobile Applications [Volume 10, Issue 2, 2023, Pages 375-382]
Mahesh, Vishwas Influence of Graphene Powder on the Physio-Mechanical Properties of Jute Reinforced Epoxy Composites for Automobile Applications [Volume 11, Issue 1, 2024, Pages 239-248]
Mahesh, Vishwas Development and Mechanical Characterization of Light Weight Fiber Metal Laminate using Jute, Kenaf and Aluminium [Volume 11, Issue 2, 2024, Pages 259-270]
Mahesh, Vishwas Feasibility Study on Application of Various MADM Approaches for Selection of Kenaf/Saw Dust Composite [Volume 12, Issue 1, 2025, Pages 13-24]
Mahmodzade Hoseyni, Seyed Ahmad Optimization of infinite composite plates with quasi-triangular holes under in-plane loading [Volume 5, Issue 2, 2018, Pages 115-130]
Mahmood, Ibtihal Abdulrazak Investigation of Mechanical Properties for Blend Epoxy-Polysulfide Reinforced with Woven Carbon and Glass Fiber [Volume 13, Issue 1, 2026, Pages 185-195]
Mahmoodi, Masoud Using the Taguchi Method for Experimental and Numerical Investigations on the Square-Cup Deep-Drawing Process for Aluminum/Steel Laminated Sheets [Volume 4, Issue 2, 2017, Pages 169-177]
Makki, Ola MReinforced Concrete Two-Way Slabs Exposing to Impulse Loadings [(Articles in Press)]
Malek-Mohammadi, Hosein Free Vibration and Buckling Analyses of Functionally Graded Nanocomposite Plates Reinforced by Carbon Nanotube [Volume 4, Issue 1, 2017, Pages 59-73]
Malgol, Amit Mechanical and Tribological Characterization of Eco-Friendly Brake Pads Using Banana Peel Powder as a Sustainable Friction Material [Volume 13, Issue 2, 2026, Pages 427-437]
Malguri, Akhilesh Initial Buckling Behavior of Elastically Supported Rectangular FGM Plate based on Higher Order Shear Deformation Theory via Spline RBF Method [Volume 11, Issue 1, 2024, Pages 59-72]
Mallik, Sadek Hossain Generalized Thermoelastic Interactions Using an Eigenvalue Technique in a Transversely Isotropic Unbounded Medium with Memory Having a Line Heat Source [Volume 11, Issue 2, 2024, Pages 413-424]
Mallik, Sadek Hossain State Space Approach to Moore-Gibson-Thompson Generalized Piezo-Thermoelasticity with Memory-Dependent Derivative [Volume 13, Issue 2, 2026, Pages 451-463]
Mamnoun, Ehsan Vibration Analysis of Sandwich Beams with Magnetorheological Elastomer Core and FGM Graphene Nanoplatelet-Reinforced Polymer Faces on Viscoelastic Foundation [Volume 12, Issue 3, 2025, Pages 447-464]
Manafi, S.A. The Structural and Mechanical Properties of Al-2.5%wt. B4C Met-al Matrix Nano-composite Fabricated by the Mechanical Alloying [Volume 2, Issue 1, 2015, Pages 39-44]
Manafi, S.A. Effect of Particle Size on the Structural and Mechanical Properties of Al–AlN Nanocomposites Fabricated by Mechanical Alloying [Volume 2, Issue 2, 2015, Pages 73-78]
Managheb, Seyyed Amir Mohammad Nonlocal Buckling and Vibration Analysis of Triple-Walled ZnO Piezoelectric Timoshenko Nano-beam Subjected to Magneto-Electro-Thermo-Mechanical Loadings [Volume 2, Issue 2, 2015, Pages 113-126]
Manjunath, Kuchangi Venkatappa Effect of Chilling & B4C content on Machining Efficiency and Surface Quality in Wire-Cut Machining of Aluminum Matrix Chilled Composites [Volume 11, Issue 2, 2024, Pages 341-350]
Manzo Preciado, José Alfredo Interlaminar Shear Failure Monitoring in GFRPs Using Graphene Nanoplatelets [Volume 14, Issue 1, 2027, Pages 191-197]
Marimuthu, Uthayakumar Optimization of AA6351-SiC-B4C Hybrid Composites in Wire EDM Using Grey Relation Technique [Volume 11, Issue 2, 2024, Pages 385-400]
Marimuthu, Uthayakumar Thrust Force and Delamination Analysis on Redmud-Filled Coconut Sheath Fiber Polyester Composite [Volume 12, Issue 1, 2025, Pages 43-52]
Mathivanan, Rajesh Effect of ON and OFF Axis Open Hole Tensile Testing of GFRP/Epoxy Composites [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 319-328]
Maurya, Madan ChandraFlexural Behaviour of Nanocomposite Plate with CNT Distribution and Agglomeration Effect [Volume 10, Issue 1, 2023, Pages 123-136]
Maurya, Madan ChandraResponse of Agglomerated SWCNT Reinforced Nanocomposite Plate under Hygro-Thermal Loading [Volume 11, Issue 1, 2024, Pages 11-40]
Mazdak, Siamak Numerical Optimization of Non-destructive Ultrasonic Testing in Identifying Defects in Composite Structure of Pine Tree Trunk [Volume 11, Issue 1, 2024, Pages 249-258]
Mazdak, Siamak Parametric Investigation of Particle Movements in Ultrasonic Levitation Process Using Piezoelectric Materials [Volume 13, Issue 2, 2026, Pages 357-369]
Meddad, Mounir Modeling Aeroelastic Vibration Dampening in Wind Turbine Blades using Piezoelectric Materials [Volume 12, Issue 3, 2025, Pages 685-694]
Meerasaheb, Koppanati Free Vibration Analysis of Simply Supported and Clamped Functionally Graded Rectangular Plate Using Coupled Displacement Field Method [Volume 12, Issue 1, 2025, Pages 73-84]
Meghlaoui, Issam Modeling Aeroelastic Vibration Dampening in Wind Turbine Blades using Piezoelectric Materials [Volume 12, Issue 3, 2025, Pages 685-694]
Mehdianfar, Pejman Static Buckling and Free Vibration Analysis of Bi-Dimensional FG Metal Ceramic Porous Beam [Volume 11, Issue 1, 2024, Pages 149-158]
Mehrabani, Mahboube Vibration Analysis of Circular Single-Layer Graphene Sheet Using Finite Element Method [Volume 6, Issue 2, 2019, Pages 131-138]
M.G.M., Sabri Green Anticorrosion Coating with Low VOCs Emission using Moringa Oleifera Leaves Extract [Volume 9, Issue 1, 2022, Pages 163-171]
Mierzwiński, Dariusz Optimization of AA6351-SiC-B4C Hybrid Composites in Wire EDM Using Grey Relation Technique [Volume 11, Issue 2, 2024, Pages 385-400]
Milojević, Saša Structural Analysis of Composite Material Disk Brakes [(Articles in Press)]
Mirza, Manzoorahamad Effect of Delamination on the Natural Frequency of Fiber Metal Laminate under Various Conditions [Volume 14, Issue 1, 2027, Pages 255-265]
Mirzaee, Omid A Case Study for Fabrication of MWCNT-TiO2 Hybrid Reinforced Aluminium Matrix Nanocomposites [Volume 1, Issue 2, 2014, Pages 107-111]
Mirzaee, Omid Evaluation of hardness and wear resistance of nano-sized titanium-carbide-reinforced commercially cast aluminum alloy matrices [Volume 5, Issue 1, 2018, Pages 75-81]
Mirzaee, Omid Investigation of Hardness, Morphology and Structural Analysis of NiCrBSi Composite Coating on Plain Carbon Steel [Volume 6, Issue 2, 2019, Pages 75-80]
Mirzaei, Jaber Design and Experimental/Numerical Analysis of Metal-Composite Vessel with Spherical Cap under Internal Pressure [Volume 10, Issue 2, 2023, Pages 247-256]
Mirzaei, Jaber Analyzing and Improving Flexural and Impact Strength of Composites Enhanced with Nanoparticles and Natural Fibers [Volume 11, Issue 2, 2024, Pages 467-482]
Mishra, Akshansh Quantum Machine Learning Approach for the Prediction of Surface Roughness in Additive Manufactured Specimens [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 425-433]
Mitra, Anirban Maximization of Fundamental Frequency of Composite Stiffened Hypar Shell with Cutout by Taguchi Method [Volume 10, Issue 1, 2023, Pages 43-54]
Moazzeni, Mostafa Nonlocal Analysis of Longitudinal Dynamic Behavior of Nanobars with Surface Energy Effect [Volume 6, Issue 2, 2019, Pages 147-158]
Modiri, Bahman Large Deformation Elastic Analysis of Pressurized FGM Thick Cylindrical Shells with Nonlinear Plane Elasticity Theory (NPET) [Volume 12, Issue 1, 2025, Pages 129-140]
Mohammad Hosseini Mirzaei, Manouchehr Thermoelastic Analysis of a Functionally Graded Simple Blade Using First-Order Shear Deformation Theory [Volume 7, Issue 1, 2020, Pages 147-155]
Mohammadi, Hassan Isogeometric Free and Forced Vibration Analyses of FG-CNTs Plates based on a Logarithmic Higher-Order Shear Deformation Theory [Volume 8, Issue 2, 2021, Pages 435-453]
Mohammadi Barkchay, Amin Numerical Analysis of Thermal Buckling of Honeycomb Core Sandwich Panel under Thermal Loading [Volume 10, Issue 2, 2023, Pages 333-342]
Mohammadi-Fesharaki, Mohammad Distribution of Residual Stresses in Polymer Reinforced Carbon Nanotubes and Laminated Carbon Fibers [Volume 4, Issue 1, 2017, Pages 9-18]
Mohammadi Hooyeh, H. Size-dependent Effects on the Vibration Behavior of a Ti-moshenko Microbeam subjected to Pre-stress Loading based on DQM [Volume 3, Issue 2, 2016, Pages 99-112]
Mohammadimehr, M. Size-dependent Effects on the Vibration Behavior of a Ti-moshenko Microbeam subjected to Pre-stress Loading based on DQM [Volume 3, Issue 2, 2016, Pages 99-112]
Mohammadimehr, Mehdi Biaxial Buckling and Bending of Smart Nanocomposite Plate Reinforced by CNTs using Extended Mixture Rule Approach [Volume 1, Issue 1, 2014, Pages 17-26]
Mohammadimehr, Mehdi Nonlocal Buckling and Vibration Analysis of Triple-Walled ZnO Piezoelectric Timoshenko Nano-beam Subjected to Magneto-Electro-Thermo-Mechanical Loadings [Volume 2, Issue 2, 2015, Pages 113-126]
Mohammadimehr, Mehdi Static Bending, Vibration, and Buckling Responses of a Sandwich Beam Composed of Five Layers Considering Honeycomb Core and CNTRC with SMA Particles and Temperature-Dependent Material Properties Using SSDT [Volume 12, Issue 1, 2025, Pages 153-168]
Mohammadimehr, Mehdi Vibration Response of a Sandwich Higher-Order Micro Beam based on Shear and Normal Deformation Theory on Kerr Elastic Foundation with Thickness Stretching Effect [Volume 12, Issue 3, 2025, Pages 645-670]
Mohammadimehr, Mehdi Experimental Investigation of Residual Stress Measurement on Cold Roll Bonded Al/Cu Composite by Incremental Hole-Drilling Method [Volume 13, Issue 1, 2026, Pages 1-11]
Mohammadimehr, Mehdi Forced Vibration Response of a Sandwich Cantilever Nine-Layer Microbeam with Homogeneous Core Reinforced by Nanocomposite and Piezo-Magneto-Electric Layers as a Self-Sensing Mass Sensor [(Articles in Press)]
Mohammad Panahiha, Hamid A New Three-Dimensional Refined Higher-Order Theory for Free Vibration Analysis of Composite Circular Cylindrical Shells [Volume 6, Issue 2, 2019, Pages 201-223]
Mohammad Panahiha, Hamid Buckling Analysis of Composite Grid-Stiffened Cylindrical Shells Using a Generalized Equivalent Single Layer Theory [Volume 8, Issue 2, 2021, Pages 455-466]
Mohammadrezazadeh, Shahin Active control of free and forced vibration of rotating laminated composite cylindrical shells embedded with magnetostrictive layers based on classical shell theory [Volume 7, Issue 2, 2020, Pages 355-369]
Mohammadrezazadeh, Shahin Nonlinear Vibration of Rotating Laminated Composite Cross-ply Cylindrical Shell on Nonlinear Rotating Elastic Foundation [Volume 9, Issue 2, 2022, Pages 317-334]
Mohammadrezazadeh, Shahin Vibration of MEE Composite Conical Shell Surrounded by Nonlinear Elastic Foundation Considering the Effect of Geometrical Nonlinearity [Volume 10, Issue 1, 2023, Pages 85-102]
Mohammad-Shirazi, Alireza Investigation of fatigue phenomenon in short-fiber reinforced composites [(Articles in Press)]
Mohammad Younus, Althaf Experimental Investigation of Repair of Glass Epoxy Composite with Edge and Center Crack by Epoxy Resin [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 371-377]
Mohammadzadeh Gonabadi, Arash Improving the Performance of the Sandwich Panel with the Corrugated Core Filled with Metal Foam: Mathematical and Numerical Methods [Volume 6, Issue 2, 2019, Pages 249-261]
Mohandes, Masood Size-dependent Bending of Geometrically Nonlinear of Micro-Laminated Composite Beam based on Modified Couple Stress Theory [Volume 3, Issue 1, 2016, Pages 53-62]
Mohandes, Masood Discrepancies Between Free Vibration of FML and Composite Cylindrical Shells Reinforced by CNTs [Volume 6, Issue 2, 2019, Pages 105-115]
Mohanraju Raju, Sundarraju Effect of Nickel Addition on the Coefficient of Thermal Expansion and Microstructural Characteristics of AA2024 and AA7175 Aluminum Alloys in As-Cast and Homogenized States [Volume 13, Issue 1, 2026, Pages 97-116]
Mohsenimonfared, Hamid Free Vibration Analysis of 2D Functionally Graded Annular Plate considering the Effect of Material Composition via 2D Differential Quadrature Method [Volume 2, Issue 2, 2015, Pages 95-111]
Mokhtari, Madhid An Analytical Approach to Thermoelastic Bending of Simply Supported Advanced Ribbed Composite Plates [Volume 5, Issue 2, 2018, Pages 173-185]
Mokhtarian Dehkordi, Behnam Forced Vibration Response of a Sandwich Cantilever Nine-Layer Microbeam with Homogeneous Core Reinforced by Nanocomposite and Piezo-Magneto-Electric Layers as a Self-Sensing Mass Sensor [(Articles in Press)]
Molla, Md Abul Kashim Generalized Thermoelastic Interactions Using an Eigenvalue Technique in a Transversely Isotropic Unbounded Medium with Memory Having a Line Heat Source [Volume 11, Issue 2, 2024, Pages 413-424]
Molla, Mohammad Abul Kashim State Space Approach to Moore-Gibson-Thompson Generalized Piezo-Thermoelasticity with Memory-Dependent Derivative [Volume 13, Issue 2, 2026, Pages 451-463]
Momeni, Amir Investigating the Effective Factors for Enhancing the Optimization of Al6061/8Al2O3-3WC-8SiC Composite Using the Friction Stir Process [Volume 13, Issue 2, 2026, Pages 371-379]
Momeni-Khabisi, Hamed Mesh-free Dynamic Analyses of FGM Sandwich Plates Resting on A Pasternak Elastic Foundation [Volume 4, Issue 2, 2017, Pages 153-168]
Momohjimoh, Ibrahim Characterization of Thevetia Peruviana (Yellow Oleander) Shell Ash Powder as a Possible Filler in Polymer Composites [Volume 8, Issue 1, 2021, Pages 109-117]
Mondal, Nasiruddin State Space Approach to Moore-Gibson-Thompson Generalized Piezo-Thermoelasticity with Memory-Dependent Derivative [Volume 13, Issue 2, 2026, Pages 451-463]
Mondal, Samar ChandraHigher Order Approximations for Bending of FG Beams Using B-Spline Collocation Technique [Volume 11, Issue 1, 2024, Pages 159-176]
Montazeri, Amin Numerical Analysis of Thermal Buckling of Honeycomb Core Sandwich Panel under Thermal Loading [Volume 10, Issue 2, 2023, Pages 333-342]
Moodi, Yaser Improving Prediction of Compressive Strength of Rectangular/Square (R/S) FRP-Confined Concrete Using Machine Learning [Volume 13, Issue 2, 2026, Pages 283-304]
Moradi, Mahdi Open-Hole Size and Thermal Cycling Effects on Mass Loss and Surface Degradation of Polymer Matrix Composites [Volume 4, Issue 2, 2017, Pages 111-116]
Moradi-dastjerdi, Rasool Free Vibration and Buckling Analyses of Functionally Graded Nanocomposite Plates Reinforced by Carbon Nanotube [Volume 4, Issue 1, 2017, Pages 59-73]
Moradi-dastjerdi, Rasool Mesh-free Dynamic Analyses of FGM Sandwich Plates Resting on A Pasternak Elastic Foundation [Volume 4, Issue 2, 2017, Pages 153-168]
Moradi Dastjerdi, R. Static and Free Vibration Analyses of Functionally Graded Nano-composite Plates Reinforced by Wavy Carbon Nanotubes Resting on a Pasternak Elastic Foundation [Volume 3, Issue 2, 2016, Pages 123-135]
Moradkhani, Alireza The Effect of Al Additive and Arc Melting Time on Synthesis of Ti3SiC2 MAX Phase using Ti/SiC/Al/Graphite [Volume 9, Issue 2, 2022, Pages 367-376]
Moradkhani, Alireza The Effect of Nano-B4C Additive on Microstructure and Mechanical Properties of Pressureless Sintering SiC Bodies [Volume 10, Issue 1, 2023, Pages 29-42]
Moradkhani, Alireza Effect of Microstructural Features and Al2O3 Doping on Aging Resistance, Mechanical Properties and Crack Propagation in 3Y-TZP Plate Ceramics for Dental Restorations: A Comprehensive Peridynamics Study [Volume 12, Issue 3, 2025, Pages 523-554]
Moradkhani, Alireza 2D Bond-Based Peridynamic Simulation of Phase Transformation in 3Y-TZP Dental Ceramics Using ABAQUS [Volume 14, Issue 1, 2027, Pages 27-39]
Moravej, M. Buckling Analysis of Functionally Graded Cylindrical Shells Under Mechanical and Thermal Loads by Dynamic Relaxation Method [Volume 7, Issue 2, 2020, Pages 297-311]
Moses, Nesasudha Patch Antennas with PDMS Substrate to Detect Tumors and their Data Transmission through ERPO-OFDM Modulation Technique in VLC [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 401-411]
Motgi, Rakesh Tensile, Flexural, and Impact Strength Analysis of a 3D Printed Carbon Fiber Reinforced Nylon Filament [Volume 12, Issue 3, 2025, Pages 615-627]
Motgi, Rakesh Lattice Structure Optimization of 3D Printed TPMS under Different Loading Conditions Using Regression Machine Learning [Volume 12, Issue 3, 2025, Pages 597-613]
Mounir, Hamid Structural Evaluation of a Horizontal Axis Wind Turbine Composite Blade Using a Monitored Testing Bench [(Articles in Press)]
Mousavi, Arash Influence of Different Foaming Conditions on the Mechanical, Physical, and Structural Properties of Polypropylene Foam [Volume 6, Issue 2, 2019, Pages 225-237]
Mousavi, Sayed-Farhad Improving the Performance of Porous Concrete Composites Using Zeolite as a Coarse Grain [Volume 5, Issue 2, 2018, Pages 157-163]
Mousavi, Seyed Rohollah Improving Prediction of Compressive Strength of Rectangular/Square (R/S) FRP-Confined Concrete Using Machine Learning [Volume 13, Issue 2, 2026, Pages 283-304]
Moyo, Ranganai Tawanda Stacking-Sequence Optimization and Buckling Analysis of Graphene/Fiber-Reinforced Laminated Plates [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 413-424]
Mozafari, M. Size Effect on the Damaged Areas of Glass/Epoxy Structures under Low Velocity Impact [Volume 1, Issue 2, 2014, Pages 81-85]
Mozaffari, A Low-velocity Impact Response of Viscoelastic Composite Laminates Considering Large Deflection and Higher-order Shear Deformation [Volume 8, Issue 2, 2021, Pages 425-434]
Munde, Yashwant A Comparative Study of Machine Learning Techniques for Predicting Mechanical Properties of Fused Deposition Modelling (FDM)-Based 3D-Printed Wood/PLA Biocomposite [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 261-270]
Muneer Ahmed, Zhaib Experimental Investigation and Simulation of Electro-Mechanical Behaviour of Hybrid Sandwich Composite Radomes for Aerospace Applications [Volume 11, Issue 2, 2024, Pages 401-412]
Muruganandam, Jayanandini Design and Analysis of Complementary Split Ring Resonator Based Low Profile Antenna Using Lightweight Polymers for Wireless, Radar and Satellite Communication [Volume 12, Issue 3, 2025, Pages 569-584]
N
N, Santhosh A Comparative Study on the Effect of HNT and Nano-Alumina Particles on the Mechanical Properties of Vacuum Bag Moulded Glass-Epoxy Nanocomposites [Volume 8, Issue 1, 2021, Pages 119-131]
Naderi, Ali Asghar Crashworthiness Study of an Innovative Helmet Liner Composed of an Auxetic Lattice Structure and PU Foam [Volume 9, Issue 1, 2022, Pages 25-35]
Naderi, Mahmood Study of Bond Strength between Polymer-Modified Mortars/Concrete and Their Mechanical Properties using “Friction-Transfer” and “Pull-off” Methods [Volume 8, Issue 1, 2021, Pages 171-184]
Naeinzadeh, Hadi Microstructure, Mechanical and Electrical Properties of Copper Matrix Composites Reinforced with Steel Nanoparticles [Volume 8, Issue 2, 2021, Pages 335-345]
Nagaraju, Sunnam Comparative Investigation of Deflection in a Bi-directional Curved Functionally Graded Porous Beam Using Unified Shear Deformation Theory [Volume 14, Issue 1, 2027, Pages 57-73]
Nagargoje, Aniket Ramnath Optimal Replacement of Glass Fabric with Carbon Fabric in Epoxy Matrix Composite [Volume 12, Issue 3, 2025, Pages 507-522]
Nagoriya, Hemant Exploring Multi-Scale Thermal Behaviour in Pin-on-Disc Systems for Organic, Metallic, Ceramic, and Polymer Composites [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 305-317]
Naik, Nitin S. Higher-order Displacement Model for Cylindrical Bending of Laminated and Sandwich Plates Subjected to Environmental Loads [Volume 8, Issue 1, 2021, Pages 185-201]
Naik, Tejas Pramod Design and Development of a Pine Needle Briquetting Machine for the Uttarakhand Region of India [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 293-303]
Najafi, M. Accelerated Heat Aging Study of Phenolic/Basalt Fiber Reinforced Composites [Volume 3, Issue 1, 2016, Pages 1-7]
Najafi, Moslem Environmental Effects on Mechanical Properties of Glass/Epoxy and Fiber Metal Laminates, Part I: Hygrothermal Aging [Volume 4, Issue 3, 2017, Pages 187-196]
Najafi, Moslem Environmental effects on mechanical properties of glass/epoxy and fiber metal laminates, Part II: Isothermal aging [Volume 4, Issue 3, 2017, Pages 197-205]
Najafi, Moslem Machining Behavior of Al-MMC Reinforced with Hybrid Additives: Effects of Cutting Parameters – A Taguchi Approach [Volume 14, Issue 1, 2027, Pages 165-180]
Najafizadeh, Mohammad Mehdi High-order Analysis of Linear Vibrations of a ModeratleyThick Sandwich Panel With an Electrorheological Core [Volume 7, Issue 2, 2020, Pages 177-188]
Najibi, Amir Numerical Crashworthiness Analysis of Graded Layered Foam- Filled Tubes Under Axial Loading [Volume 6, Issue 1, 2019, Pages 57-64]
Nalband, Fazil Reinforcement Surface Modification Effect on the Microstructure, Mechanical, and Tensile Fractography of Al2219 Alloy B4C Composites [Volume 13, Issue 1, 2026, Pages 197-210]
Namdev, Nagaraj Reinforcement Surface Modification Effect on the Microstructure, Mechanical, and Tensile Fractography of Al2219 Alloy B4C Composites [Volume 13, Issue 1, 2026, Pages 197-210]
Narayanaswamy, Ananthi Modeling and Numerical Prediction on Mechanical Behaviors of Hybrid Fiber Reinforced Polymer Bio Composites Using Fuzzy Logic Algorithm [Volume 12, Issue 1, 2025, Pages 199-210]
Narmashiri, Kambiz Effects of Horizontal Deficiency Location on the Structural Behaviors of Steel SHS Short Columns Strengthened using CFRP [Volume 7, Issue 1, 2020, Pages 39-47]
Nasir, Muhammad Ali Experimental Investigation and Simulation of Electro-Mechanical Behaviour of Hybrid Sandwich Composite Radomes for Aerospace Applications [Volume 11, Issue 2, 2024, Pages 401-412]
Nasrollah, Amin Experimental Analysis of the Effect of Mechanical Topology on the Surface of Biological Microgripper Made of Ionic-Polymer Metal Composite Smart Material [Volume 13, Issue 1, 2026, Pages 143-156]
Navazi, H. M. Dynamic Characteristics of Joined Steel and Carbon Fiber-Reinforced Plastic Tubes: Experimental and Numerical Investigation [Volume 4, Issue 2, 2017, Pages 88-97]
Naveen Prakash, G V Optimization of Machining parameters of Titanium Di-Oxide (TiO2) and Graphite Reinforced Aluminum Alloy Metal Matrix by Taguchi Grey Relational Analysis Technique [(Articles in Press)]
Nazemizadeh, mostafa Size-dependent Vibration Analysis of Non-uniform Mass Sensor Nanobeams [Volume 8, Issue 2, 2021, Pages 235-244]
Nazemnezhad, Reza Nonlocal Analysis of Longitudinal Dynamic Behavior of Nanobars with Surface Energy Effect [Volume 6, Issue 2, 2019, Pages 147-158]
Nazemnezhad, Reza A Novel Method for Considering Interlayer Effects between Graphene Nanoribbons and Elastic Medium in Free Vibration Analysis [Volume 7, Issue 1, 2020, Pages 79-88]
Nazemnezhad, Reza Nonlinear Torsional Vibration Analysis of Nanorods in the Presence of Surface Energy Effect: Multi-Mode Galerkin Method [Volume 9, Issue 2, 2022, Pages 229-242]
Nazemnezhad, Reza Longitudinal Vibration of Nanobeams by Two-Phase Local/Nonlocal Elasticity, Rayleigh Theory, and Generalized Differential Quadrature Method [Volume 10, Issue 2, 2023, Pages 221-232]
Nazemnezhad, Reza A Semi-Analytical Nonlinear Approach for Size-Dependent Analysis of Longitudinal Vibration in Terms of Axially Functionally Graded Nanorods [Volume 11, Issue 2, 2024, Pages 453-466]
Nazemnezhad, Reza Achieving High Strength in Fe-Based Metallic Glass Reinforced Aluminum Matrix Composites through Combined Ball Milling and Spark Plasma Sintering [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 435-446]
Nejatbakhsh, Hossein Parametric Analysis of Position and Direction of Laminated Composite C-Spar on Aeroelastic Flutter in Aircraft Tail [Volume 11, Issue 2, 2024, Pages 351-362]
Nejati, Mohammad Free Vibration Analysis of 2D Functionally Graded Annular Plate considering the Effect of Material Composition via 2D Differential Quadrature Method [Volume 2, Issue 2, 2015, Pages 95-111]
Nejati, Mohammad Frequency Analysis of Functionally Graded Carbon Nanotube-reinforced Cylindrical Panels by Mesh-free Galerkin Method [Volume 8, Issue 2, 2021, Pages 415-424]
Nesasudha, M. S-Parameter Analysis of Three-Layered Aperture Coupled Antenna with a Flame Retardant-4 Composite Material as Substrate for Biomedical Applications [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 361-369]
Netiworaruksa, Benjamas Mechanical Properties of Hemp Fiber-Reinforced Polypropylene Composites for Drone Propeller Guard Application [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 271-277]
Nguyen, Thi Hoa Buckling and Nonlinear Vibration of Functionally Graded Porous Micro-beam Resting on Elastic Foundation [Volume 9, Issue 1, 2022, Pages 75-88]
Nguyen, Van-Chinh A Finite Element Formulation for Analyzing the Nonlinear Static Response of Bi-functionally Graded Microbeam Resting on Elastic Foundation Under Various Loads [Volume 13, Issue 1, 2026, Pages 227-243]
Niknejad, Abbas Experimental Study on Double-Walled Copper and Carbon/Epoxy Composite Tubes under the Axial Loading [Volume 1, Issue 2, 2014, Pages 71-79]
Nomrawee, Pongsaphat The Impact of Fiber Architecture on the Mechanical Properties of Hand Lay-up Reinforced Polyester Resin [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 393-400]
Norouzifard, Vahid Microstructure, Mechanical and Electrical Properties of Copper Matrix Composites Reinforced with Steel Nanoparticles [Volume 8, Issue 2, 2021, Pages 335-345]
Nouri, Mohammad Cured Poly(ethylene-g-maleic anhydride)/Graphene Nanocomposite: Properties and Characterization [Volume 5, Issue 1, 2018, Pages 1-12]
Nouri Damghani, Mohammad Improving the Performance of the Sandwich Panel with the Corrugated Core Filled with Metal Foam: Mathematical and Numerical Methods [Volume 6, Issue 2, 2019, Pages 249-261]
Nouri Damghani, Mohammad Enhancing Mechanical Properties of Polypropylene Composites Reinforced with Date Palm Fiber Using Maleic Anhydride Grafted Polypropylene as a Compatibilizer [Volume 13, Issue 1, 2026, Pages 211-226]
Nouri Niyaraki, Ebrahim Evaluation of the Effect of polyethylene/SMR20 Hybrid Nanocomposites Reinforced with Basalt Fibers and Graphene using RSM [Volume 13, Issue 2, 2026, Pages 401-414]
Nouri Niyaraki, Meysam Design and Experimental/Numerical Analysis of Metal-Composite Vessel with Spherical Cap under Internal Pressure [Volume 10, Issue 2, 2023, Pages 247-256]
Noyming, Sombut Biodegradation, Mechanical and Physical Properties of Poly(butylene succinate) and Natural Rubber Compound Blend Filled with Activated Carbon from Coconut Fruit [Volume 13, Issue 1, 2026, Pages 157-169]
Nuilek, Kanokon Characterization of Physical and Mechanical Properties, and Morphology of Wood Composites Derived from Milk Bottles and Teak Sawdust Powder [Volume 13, Issue 2, 2026, Pages 259-269]
Nursabrina Mohd Nasir, Amirah Green Anticorrosion Coating with Low VOCs Emission using Moringa Oleifera Leaves Extract [Volume 9, Issue 1, 2022, Pages 163-171]
O
Oday, AlSeddiq Impact and Blast Resistance Enhancement of Reinforced Concrete Slabs Strengthened with CFRP and GFRP Systems: Experimental and Numerical Investigation [(Articles in Press)]
Ohab-Yazdi, Sayed Mohammad Kazem Application of Bi-Directional Functionally Graded Material Model for Free Vibration Analysis of Rotating Euler-Bernoulli Nanobeams [Volume 8, Issue 2, 2021, Pages 389-399]
Okafor, Christian Emeka The Graft of ANN-FEM Technique in Macro-mechanics of Multi-oriented Natural Fiber/Polyester Laminates [Volume 8, Issue 1, 2021, Pages 51-68]
Okhlopkova, Aitalina Climatic Testing of Polytetrafluoroethylene Based Composites [(Articles in Press)]
Olad, Ali A Study of the Effect of TPU and Clay Nanoparticles on the Mechanical Behavior of PBT-Based Nanocomposites [Volume 4, Issue 3, 2017, Pages 179-186]
Omidi, Narges Experimental Investigation of FGM Dental Implant Properties Made from Ti/HA Composite [Volume 4, Issue 3, 2017, Pages 233-237]
Omidi Bidgoli, Mostafa A Case Study on the Influence of Friction Coefficient and Rotational Speed on Transient Thermoelastic Response of FGM Rotating Cylinder [Volume 9, Issue 2, 2022, Pages 399-408]
Omrani, Abdollah Investigation of Capsulated Epoxy and DCPD in Epoxy Based Self-healing Composites - DFT Calculation and Experimental Analysis [Volume 5, Issue 2, 2018, Pages 165-171]
Osipova, Victoriy Effect of the Nature of Oxide Nanofillers on Changes in the Mechanical Properties of Epoxy Coatings under Thermal Cycling [Volume 10, Issue 1, 2023, Pages 195-204]
Ouaoua, Lokmane Development of a Composite Material Based on a Polymer and Plant Fibers [Volume 13, Issue 2, 2026, Pages 391-399]
Oudni, Nasserdine Numerical Estimation of the Effective Mechanical Properties (EMP) of Steel AISI 4340 Fiber-Reinforced Concrete [Volume 14, Issue 1, 2027, Pages 151-163]
Ouled Ahmed, R.B.A. Modeling of Hygrothermal Damage of Composite Materials [Volume 3, Issue 2, 2016, Pages 137-144]
Ouled Ahmed Ben Ali, Raja Springback Prediction of Sandwich Panel Using Machine Learning Methods [Volume 10, Issue 1, 2023, Pages 11-20]
Outla, Ikram Structural Evaluation of a Horizontal Axis Wind Turbine Composite Blade Using a Monitored Testing Bench [(Articles in Press)]
P
Pagoli, M. Analytical Solution for Sound Radiation of Vibrating Circular Plates coupled with Piezo-electric Layers [Volume 3, Issue 2, 2016, Pages 89-98]
Pahlavani Bidgoli, Komeil Influence of Hydroxyl-Terminated Polybutadiene (HTPB) on the Mechanical and Electrical Properties of Epoxy Phenol Novolac Resin [Volume 13, Issue 2, 2026, Pages 381-390]
Pakpahan, Binsar Maruli Tua Advanced FEA simulation of Mode II Interlaminar Fracture in Flax/Epoxy Multidirectional Laminate Composites Using the End-Notched Flexure (ENF) Test [(Articles in Press)]
Pal, Jayantika Propagation Behavior of Love-Type Waves in a Poro-elastic Medium using Staggered Grid Finite Difference Scheme [Volume 8, Issue 2, 2021, Pages 359-365]
Palani, Geetha Thrust Force and Delamination Analysis on Redmud-Filled Coconut Sheath Fiber Polyester Composite [Volume 12, Issue 1, 2025, Pages 43-52]
Palekar, Shailesh P.XFEM for Fracture Analysis of Centrally Cracked Laminated Plates Subjected to Biaxial Loads [Volume 8, Issue 1, 2021, Pages 213-234]
Panahizadeh, Valiollah The Effect of Nano-B4C Additive on Microstructure and Mechanical Properties of Pressureless Sintering SiC Bodies [Volume 10, Issue 1, 2023, Pages 29-42]
Panahizadeh, Valiollah Effect of Microstructural Features and Al2O3 Doping on Aging Resistance, Mechanical Properties and Crack Propagation in 3Y-TZP Plate Ceramics for Dental Restorations: A Comprehensive Peridynamics Study [Volume 12, Issue 3, 2025, Pages 523-554]
Pandey, Ayush Initial Buckling Behavior of Elastically Supported Rectangular FGM Plate based on Higher Order Shear Deformation Theory via Spline RBF Method [Volume 11, Issue 1, 2024, Pages 59-72]
Pandian, Pitchipoo Studies on Progress of Aluminum Based Composites for Automotive Applications and its Damping Characteristics – A Review [Volume 12, Issue 1, 2025, Pages 25-42]
Pandian, Pitchipoo An Overview of Progression and Recent Trends in Additively Manufactured AlSi10Mg Alloy through Scientometrics [Volume 12, Issue 3, 2025, Pages 707-726]
Pandian, Pitchipoo Influence of Process Parameters on the Mechanical Properties of Carbon Fibre Reinforced PETG [Volume 13, Issue 1, 2026, Pages 171-184]
Panneerselvam, Devi Modeling and Numerical Prediction on Mechanical Behaviors of Hybrid Fiber Reinforced Polymer Bio Composites Using Fuzzy Logic Algorithm [Volume 12, Issue 1, 2025, Pages 199-210]
Pappula, Bridjesh Comparative Investigation of Deflection in a Bi-directional Curved Functionally Graded Porous Beam Using Unified Shear Deformation Theory [Volume 14, Issue 1, 2027, Pages 57-73]
Parhizkar Yaghoobi, Mohammad Electro-Elastic Analysis of Finite Length FGPM Cylinders Subjected to Electromechanical Loading Using First-Order Electric Potential Theory [Volume 8, Issue 1, 2021, Pages 15-31]
Parmar, Vijay Artificial Neural Network (ANN) Approach to Predict Tensile Properties of Longitudinally Placed Fiber Reinforced Polymeric Composites including Interphase [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 353-360]
Parsa, Hosein Tensile Strength Prediction of Glass/Epoxy Composite Structures Using Machine Learning and Response Surface Methodology [(Articles in Press)]
Parvizi, Soroush Investigating the Effective Factors for Enhancing the Optimization of Al6061/8Al2O3-3WC-8SiC Composite Using the Friction Stir Process [Volume 13, Issue 2, 2026, Pages 371-379]
Patel, Murlidhar Optimal Replacement of Glass Fabric with Carbon Fabric in Epoxy Matrix Composite [Volume 12, Issue 3, 2025, Pages 507-522]
Patel, Shital Evaluation of Heat Resistance Characteristics of Fibrous Material for Cold Weather Application [Volume 11, Issue 1, 2024, Pages 231-238]
Pati, Pravat Ranjan Enhancement of Mechanical Properties of Coir, Kapok, and Hemp Fiber-Reinforced Epoxy Composites for a Variety of Applications [Volume 13, Issue 2, 2026, Pages 271-281]
Patil, Santosh S.Finite Element Analysis of Mechanical Properties of Basalt-Carbon Epoxy Hybrid Laminates [Volume 9, Issue 2, 2022, Pages 263-274]
Patil, Vinayak Evaluation of Heat Resistance Characteristics of Fibrous Material for Cold Weather Application [Volume 11, Issue 1, 2024, Pages 231-238]
Paul, Lijo Multi-response Optimization while Drilling of Composite Laminate with Core Drill by Grey Entropy Fuzzy (GEF) Method [Volume 11, Issue 2, 2024, Pages 483-502]
Paundra, Fajar Advanced FEA simulation of Mode II Interlaminar Fracture in Flax/Epoxy Multidirectional Laminate Composites Using the End-Notched Flexure (ENF) Test [(Articles in Press)]
Pavirala, Ritin Effect of ON and OFF Axis Open Hole Tensile Testing of GFRP/Epoxy Composites [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 319-328]
Payganeh, G. Static and Free Vibration Analyses of Functionally Graded Nano-composite Plates Reinforced by Wavy Carbon Nanotubes Resting on a Pasternak Elastic Foundation [Volume 3, Issue 2, 2016, Pages 123-135]
Peiravi, Mohammad Mohsen 3D Numerical Simulation of Fibers Arrangement Effects On Thermal Conductivity of Polymer Matrix Composite [Volume 9, Issue 1, 2022, Pages 59-73]
Pendhari, Sandeep ShivramFunctionally Graded Piezoelectric Plates in Cylindrical Bending by Semi-analytical Approach [Volume 9, Issue 2, 2022, Pages 409-424]
Pendhari, Sandeep ShivramQuick Review and Assessment of Thermal Stress Analyses for Exact and Assumed Temperature Distribution for Composite and Sandwich Laminates [Volume 10, Issue 2, 2023, Pages 343-362]
Pestov, Aleksandr Effect of the Nature of Oxide Nanofillers on Changes in the Mechanical Properties of Epoxy Coatings under Thermal Cycling [Volume 10, Issue 1, 2023, Pages 195-204]
Piri, Farideh Synthesis and Characterization Al2O3/Novolac/Fiberglass Nanocomposite: Modification of Thermal Stability and Thermal Insulation Properties [Volume 10, Issue 1, 2023, Pages 21-28]
Piri, Farideh Preparation, Identification, and Evaluation of the Thermal Properties of Novolac Resins Modified with TiO2, MgO, and V2O5 Oxides [Volume 11, Issue 1, 2024, Pages 1-9]
Piriyakul, Keeratikan Enhancement of Compressive Strength in Cement Admixed Bangkok Clay with Glass Fiber and Bottom Ash for Eco-Friendly Functional Road Materials [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 279-292]
Pirouzi, Behrooz Effects of reinforcement distribution on the mechanical properties of Al–Fe3O4 nanocomposites fabricated via accumulative roll bonding [Volume 5, Issue 2, 2018, Pages 131-139]
Pitchaimani, Gopi Complementary Split Ring Resonator-Inspired Antenna for Wearable Multiband Applications Using Biodegradable Polylactic Acid [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 339-352]
Pitchipoo, Pandian A Review of Research Outcomes on Fabrication Methods and Investigations for Evaluating Fracture Behavior of Aluminum Metal Matrix Composites with its Applications [Volume 8, Issue 2, 2021, Pages 347-358]
Pitta, Satyasaibaba Shift-Robust Machine Learning Surrogate with Importance-Weighted Conformal Prediction for Vibration and Inverse Design of Functionally Graded Porous Tapered Beams [(Articles in Press)]
Pochalard, Sakol Enhancement of Compressive Strength in Cement Admixed Bangkok Clay with Glass Fiber and Bottom Ash for Eco-Friendly Functional Road Materials [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 279-292]
Ponnarengan, Hariharasakthisudhan Effect of Aspect Ratio on the Workability of AA6082/Metakaolin/Nano Silicon Nitride Composites: An Experimental Investigation and Predictive Modeling using RSM and ANN [Volume 14, Issue 1, 2027, Pages 217-236]
Porwal, Rajesh KumarAnalysis & Optimization of Wire-EDM Parameters for Dimensional Stability of AZ91 based Al2O3p/SiCp Hybrid Composite [(Articles in Press)]
Porwal, Rajesh Kumar Mechanical and Physical Properties Observations for Cu-Gr-SiC Composite Synthesized by Powder Metallurgy [Volume 13, Issue 2, 2026, Pages 339-345]
Poureini, R. Reduction of Biaxial Bending and Torsion in Ionic Polymer-Metal Actuators through Symmetric Voltage Distribution and Improved Boundary Conditions [(Articles in Press)]
Pouresmaeeli, Saleh Buckling Analysis of Spherical Composite Panels Reinforced by Carbon Nanotube [Volume 2, Issue 2, 2015, Pages 135-144]
Praburam, G. Optimization of Wear Behaviour on Mg-TiO2 Nanocomposite Using Taguchi Grey Relational Analysis [Volume 10, Issue 1, 2023, Pages 151-156]
Prachumchon, Chayapol Mechanical Properties of Hemp Fiber-Reinforced Polypropylene Composites for Drone Propeller Guard Application [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 271-277]
Pradhan, Atharva A.Finite Element Analysis of Mechanical Properties of Basalt-Carbon Epoxy Hybrid Laminates [Volume 9, Issue 2, 2022, Pages 263-274]
Pradhan, N. Nonlinear Bending Behavior of Functionally Graded Plates Combined with Active Fiber Composites under Thermal Environment [Volume 8, Issue 2, 2021, Pages 299-308]
Pradhan, Priyabrat Dielectric and Thermal Behaviour Analysis of Epoxy Composites Filled with Date Seed Particles Using Finite Element Method [Volume 13, Issue 2, 2026, Pages 347-355]
Pramanik, Abhijit Analysis of Electrically Shorted and Open Cases on Love Waves Propagating in Piezoelectric Layer Embedded over a Fiber-Reinforced Substrate [Volume 12, Issue 1, 2025, Pages 1-12]
Pramudi, Ganjar Mechanical Properties of Sandwich Composite with Polyurethane Core Reinforced by Biaxial Geogrid and Carbon-Glass Fiber/Polyester as Skin[Volume 14, Issue 1, 2027, Pages 180-189]
Pramudia, Mirza Advanced FEA simulation of Mode II Interlaminar Fracture in Flax/Epoxy Multidirectional Laminate Composites Using the End-Notched Flexure (ENF) Test [(Articles in Press)]
Prasad, Ram BilasVibration and Buckling Analysis of Skew Sandwich Plate using Radial Basis Collocation Method [Volume 10, Issue 2, 2023, Pages 383-392]
Prasad, Ram Bilas Meshfree Approach for the Torsional Analysis of Orthotropic and FGM Thin-Walled Open Sections [Volume 12, Issue 3, 2025, Pages 629-644]
Prasoetsopha, Natkrita Mechanical Properties of Hemp Fiber-Reinforced Polypropylene Composites for Drone Propeller Guard Application [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 271-277]
Prasoetsopha, Natkrita The Impact of Fiber Architecture on the Mechanical Properties of Hand Lay-up Reinforced Polyester Resin [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 393-400]
Prasoetsopha, Natkrita Biodegradation, Mechanical and Physical Properties of Poly(butylene succinate) and Natural Rubber Compound Blend Filled with Activated Carbon from Coconut Fruit [Volume 13, Issue 1, 2026, Pages 157-169]
Prasoetsopha, Natkrita Characterization of Physical and Mechanical Properties, and Morphology of Wood Composites Derived from Milk Bottles and Teak Sawdust Powder [Volume 13, Issue 2, 2026, Pages 259-269]
Prasoetsopha, Natkrita Eco-Friendly Prefabricated Vertical Drains from PBS/NRC Blends: Tensile Properties and Biodegradation [(Articles in Press)]
Purohit, Abhilash Dielectric and Thermal Behaviour Analysis of Epoxy Composites Filled with Date Seed Particles Using Finite Element Method [Volume 13, Issue 2, 2026, Pages 347-355]
Q
Qader, Ibrahim NazemMultifunctional Properties of Metal Fibers Reinforced Polymer Composites – A Review [Volume 11, Issue 1, 2024, Pages 217-230]
R
R, Suresh A Comparative Study on the Effect of HNT and Nano-Alumina Particles on the Mechanical Properties of Vacuum Bag Moulded Glass-Epoxy Nanocomposites [Volume 8, Issue 1, 2021, Pages 119-131]
Rabieyan-Najafabadi, Hamid Parametric Analysis of Position and Direction of Laminated Composite C-Spar on Aeroelastic Flutter in Aircraft Tail [Volume 11, Issue 2, 2024, Pages 351-362]
Rafiee, Roham Investigation of fatigue phenomenon in short-fiber reinforced composites [(Articles in Press)]
Rafiquzzaman, M. An Experimental and Numerical Approach of Polymer Composites Based on Jute-Bamboo Natural Fiber [Volume 9, Issue 1, 2022, Pages 105-113]
Raghav, Sapna Modeling and Experimental Validation of Carbon Fiber-Kevlar Honeycomb Core Sandwich Structure [Volume 13, Issue 1, 2026, Pages 69-82]
Rahimi, A.S. Atomic Simulation of Temperature Effect on the Mechanical Properties of Thin Films [Volume 2, Issue 1, 2015, Pages 31-38]
Rahimi, Gholam Hosein Damage Energy Evaluation in [55/-55]9 Composite Pipes using Acoustic Emission Method [Volume 2, Issue 2, 2015, Pages 127-134]
Rahimi, Gholam Hosein Investigation into The Behavior of Nano-composite Tubes at Ballistic Impact [Volume 4, Issue 3, 2017, Pages 207-210]
Rahimijonoush, Amirmasood Experimental Investigation of Residual Stress Measurement on Cold Roll Bonded Al/Cu Composite by Incremental Hole-Drilling Method [Volume 13, Issue 1, 2026, Pages 1-11]
Rahimi Sharbaf, Hamed Investigation into The Behavior of Nano-composite Tubes at Ballistic Impact [Volume 4, Issue 3, 2017, Pages 207-210]
Rahmani, A. Experimental Study on Dynamic Behavior of Acrylonitrile-Butadiene-Styrene (ABS) Based Nano Composite Reinforced by Nano Silica Addition [Volume 7, Issue 2, 2020, Pages 313-320]
Rahmani, Arash Vibration Characteristics of Functionally Graded Micro-Beam Carrying an Attached Mass [Volume 7, Issue 1, 2020, Pages 49-58]
Rahmani, Hossein Elastic analysis of Shrink-fitted Thick FGM Cylinders Based on Linear Plane Elasticity Theory [Volume 7, Issue 1, 2020, Pages 121-127]
Rahmani, Hossein Finite Difference Analysis of 2D Stress Wave Propagation in Two Dimensional Functionally Graded Ceramics-Metals Composites [Volume 8, Issue 2, 2021, Pages 321-334]
Rahmanpour, Muhammadreza Evaluation of the Effect of polyethylene/SMR20 Hybrid Nanocomposites Reinforced with Basalt Fibers and Graphene using RSM [Volume 13, Issue 2, 2026, Pages 401-414]
Rahnama, Saeed Optimization of Laser Surface Treatment Parameters on Shear Strength of Al/CFRP Adhesively Bonded Lap Joint [(Articles in Press)]
Rahwanto, Adi Enhancing the Performance of High-Loaded Coconut Shell Biocomposites with NaOH Treatment [(Articles in Press)]
Rajab, Hamad Asymmetric and Oblique Impact on Perforated Plate and Ceramic–Composite Armor Systems: A numerical Study [(Articles in Press)]
Rajab, Manal zThe Effect of the Solvents on Electrical Properties of POT Conducting Polymer [Volume 8, Issue 2, 2021, Pages 283-289]
Rajabi Delivand, Mohammad Hasan Investigating the Effective Factors for Enhancing the Optimization of Al6061/8Al2O3-3WC-8SiC Composite Using the Friction Stir Process [Volume 13, Issue 2, 2026, Pages 371-379]
Rajabizadeh Mirakabad, S. Static and Free Vibration Analyses of Functionally Graded Nano-composite Plates Reinforced by Wavy Carbon Nanotubes Resting on a Pasternak Elastic Foundation [Volume 3, Issue 2, 2016, Pages 123-135]
Rajad, Omar Structural Evaluation of a Horizontal Axis Wind Turbine Composite Blade Using a Monitored Testing Bench [(Articles in Press)]
Rajak, Basudeb Initial Buckling Behavior of Elastically Supported Rectangular FGM Plate based on Higher Order Shear Deformation Theory via Spline RBF Method [Volume 11, Issue 1, 2024, Pages 59-72]
Rajakarunakaran, Sivaprakasam A Review of Research Outcomes on Fabrication Methods and Investigations for Evaluating Fracture Behavior of Aluminum Metal Matrix Composites with its Applications [Volume 8, Issue 2, 2021, Pages 347-358]
Raja Murugan, Thavidan Vellaiyan Prediction and Parametric Effect in Drilling of Natural Fiber Laminate Using Combined Taguchi- Artificial Neural Network Approach [Volume 13, Issue 2, 2026, Pages 415-426]
Rajendra, Pagadaddinni Effect of Nickel Addition on the Coefficient of Thermal Expansion and Microstructural Characteristics of AA2024 and AA7175 Aluminum Alloys in As-Cast and Homogenized States [Volume 13, Issue 1, 2026, Pages 97-116]
Rajendran, Sundarakannan Thrust Force and Delamination Analysis on Redmud-Filled Coconut Sheath Fiber Polyester Composite [Volume 12, Issue 1, 2025, Pages 43-52]
Ramachandran, Prabhakaran Influence of Process Parameters on the Mechanical Properties of Carbon Fibre Reinforced PETG [Volume 13, Issue 1, 2026, Pages 171-184]
Ramamoorthi, Venkatesh Influence of Process Parameters on the Mechanical Properties of Carbon Fibre Reinforced PETG [Volume 13, Issue 1, 2026, Pages 171-184]
Ramana, Maringanti Venkata Multi-response Optimization while Drilling of Composite Laminate with Core Drill by Grey Entropy Fuzzy (GEF) Method [Volume 11, Issue 2, 2024, Pages 483-502]
Ramesha, Channegowdana Doddy Madegowda Effect of Nickel Addition on the Coefficient of Thermal Expansion and Microstructural Characteristics of AA2024 and AA7175 Aluminum Alloys in As-Cast and Homogenized States [Volume 13, Issue 1, 2026, Pages 97-116]
Rangappa, Sanjay Mavinkere Pandanus Tectorius Fiber/ Rice Husk Powder as Green Reinforcement for Lightweight Composites: Evaluation of Impact Strength Properties and Thermal Stability [Volume 12, Issue 3, 2025, Pages 695-706]
Ranjbarzadeh, Hossein Nonlinear Behavior of Honeycomb Structure Under Large Deformations Using Absolute Nodal Coordinate Formulation and Periodic Homogenization [Volume 14, Issue 1, 2027, Pages 1-17]
Ranjitharamasamy, Sudhakara Pandian Mechanical Testing of Novel and Conventional Geopolymer Brick Dried under Passive Solar Dryer with Ferric Chloride Dihydrate as Phase Change Material [Volume 13, Issue 1, 2026, Pages 23-35]
Ratchapakdee, Pongpun Effect of Annealing on Tensile Strength of 3D Printed PLA with Material Extrusion [Volume 12, Issue 3, 2025, Pages 465-472]
Raut, Nikhil Prakash Effect of Delamination on the Natural Frequency of Fiber Metal Laminate under Various Conditions [Volume 14, Issue 1, 2027, Pages 255-265]
Rawat, Devi Singh Integration of Artificial Neural Network and Taguchi Method for Prediction and Minimisation of Thick-Walled Polypropylene Gear Shrinkage [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 249-260]
Razavi, Soheil On the Buckling the Behavior of a Multiphase Smart Plate based on a Higher-order Theory [Volume 4, Issue 1, 2017, Pages 47-58]
Reddy, B. S. Comparison of Deflection in Two-Directional Functionally Graded Tapered Beam [Volume 11, Issue 1, 2024, Pages 191-202]
Reddy, G. Chandra MohanaFree Vibration Analysis of 2D Functionally Graded Porous Beams Using Novel Higher-Order Theory [Volume 10, Issue 1, 2023, Pages 69-84]
Reddy, G. Chandra Mohana On Numerical Investigation of Buckling in Two-Directional Porous Functionally Graded Beam Using Higher Order Shear Deformation Theory [Volume 10, Issue 2, 2023, Pages 393-406]
Reddy, G. Chandra Mohana Comparison of Deflection in Two-Directional Functionally Graded Tapered Beam [Volume 11, Issue 1, 2024, Pages 191-202]
Reddy, K. V. K. Comparison of Deflection in Two-Directional Functionally Graded Tapered Beam [Volume 11, Issue 1, 2024, Pages 191-202]
Reddy, Mahadeva Effect of Chilling & B4C content on Machining Efficiency and Surface Quality in Wire-Cut Machining of Aluminum Matrix Chilled Composites [Volume 11, Issue 2, 2024, Pages 341-350]
Reddy, Matta Vishnu Jagadiswar Enhancement of Mechanical Properties of Coir, Kapok, and Hemp Fiber-Reinforced Epoxy Composites for a Variety of Applications [Volume 13, Issue 2, 2026, Pages 271-281]
Rexy, J Vibration in an Electrically Affected Hygro-magneto-thermo-flexo Electric Nanobeam Embedded in Winkler-Pasternak Foundation [Volume 8, Issue 2, 2021, Pages 401-414]
Rezaeepazhand, Jalil Experimental Study on Amine-Functionalized Carbon Nanotubes’ Effect on the Thermomechanical Properties of CNT/Epoxy Nano-composites [Volume 5, Issue 1, 2018, Pages 41-48]
Rezaei, Mohammad Reza Achieving High Strength in Fe-Based Metallic Glass Reinforced Aluminum Matrix Composites through Combined Ball Milling and Spark Plasma Sintering [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 435-446]
Rezaeifar, Omid Damage Detection in Concrete Filled Tube Columns Based on Experimental Modal Data and Wavelet Technique [Volume 7, Issue 2, 2020, Pages 245-254]
Rezaei Qazviniha, Mohsen Synthesis and Characterization Al2O3/Novolac/Fiberglass Nanocomposite: Modification of Thermal Stability and Thermal Insulation Properties [Volume 10, Issue 1, 2023, Pages 21-28]
Rezaei Qazviniha, Mohsen Preparation, Identification, and Evaluation of the Thermal Properties of Novolac Resins Modified with TiO2, MgO, and V2O5 Oxides [Volume 11, Issue 1, 2024, Pages 1-9]
Rezvan Rostami, Reza Experimental Study on Surface Roughness and Cutting Force in Turning of Al7032 Reinforced with SiC Using Taguchi Design [Volume 8, Issue 1, 2021, Pages 69-76]
Rich, Mohamed Structural Evaluation of a Horizontal Axis Wind Turbine Composite Blade Using a Monitored Testing Bench [(Articles in Press)]
Rinawa, Motilal Mechanical Properties and Water Absorption of Epoxy Composites Reinforced with Treated Long Hair Fiber for Sustainable Manufacturing [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 379-392]
Rodbumrung, Anurak Mechanical Properties of Hemp Fiber-Reinforced Polypropylene Composites for Drone Propeller Guard Application [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 271-277]
Rodriguez González, Julio Alejandro Interlaminar Shear Failure Monitoring in GFRPs Using Graphene Nanoplatelets [Volume 14, Issue 1, 2027, Pages 191-197]
Roghani, Mehran Mechanical Behavior and Optimization of Functionally Graded Hollow Cylinder with an Elliptic Hole [Volume 7, Issue 2, 2020, Pages 189-201]
Rostamiyan, Y. An Analytical Study on Effects of adding Nanoparticles to Water and Enhancement in Thermal Properties Based on Falkner-Skan Model [Volume 1, Issue 1, 2014, Pages 27-35]
Rostamiyan, Yasser Investigation of Buckling Analysis of Epoxy/ Nanoclay/ Carbon Fiber Hybrid Laminated Nanocomposite: Using VARTM Technique for Preparation [Volume 3, Issue 1, 2016, Pages 63-71]
Rostamiyan, Yasser Improving Mechanical Properties of Nanocomposite-based Epoxy by High-impact Polystyrene and Multiwalled Carbon Nanotubes: Optimizing by a Mixture Design Approach [Volume 4, Issue 1, 2017, Pages 33-45]
Rostamiyan, Yasser Study on Compression and Flexural Behavior of ABS-SiO2 Poly-mer Matrix Composite Fabricated by Hot Extrusion [Volume 6, Issue 2, 2019, Pages 239-247]
Rostamiyan, Yasser Experimental Study on Dynamic Behavior of Acrylonitrile-Butadiene-Styrene (ABS) Based Nano Composite Reinforced by Nano Silica Addition [Volume 7, Issue 2, 2020, Pages 313-320]
Rostamiyan, Yasser Analytical and Numerical Solution of Heat Transfer Equation in Rectangular Composite Fins [Volume 9, Issue 1, 2022, Pages 199-211]
Rousta-Navi, Borhan Biaxial Buckling and Bending of Smart Nanocomposite Plate Reinforced by CNTs using Extended Mixture Rule Approach [Volume 1, Issue 1, 2014, Pages 17-26]
Roy, Aditya Optimal Replacement of Glass Fabric with Carbon Fabric in Epoxy Matrix Composite [Volume 12, Issue 3, 2025, Pages 507-522]
Roychowdhury, Suparna Analysis of Electrically Shorted and Open Cases on Love Waves Propagating in Piezoelectric Layer Embedded over a Fiber-Reinforced Substrate [Volume 12, Issue 1, 2025, Pages 1-12]
Rubio González, Carlos Interlaminar Shear Failure Monitoring in GFRPs Using Graphene Nanoplatelets [Volume 14, Issue 1, 2027, Pages 191-197]
Rudianto, Haris Metallurgical Assessment of Graphite Reinforced Al-Cu-Mg Nanocomposites Produced by the Shaker Mill Method [Volume 10, Issue 1, 2023, Pages 103-110]
S
S, Chandrika Advancing Sustainable Mobility Through Hybrid Kenaf–Cenosphere Reinforced Epoxy Composites: Integrated Assessment of Mechanical Performance, Lightweighting, Sustainability, and Cost Efficiency [(Articles in Press)]
Saadatfar, Mahdi Transient Solution of Heat and Moisture Transfer in a Functionally Graded Hollow Cylinder with Finite Length [Volume 9, Issue 1, 2022, Pages 49-57]
Saadatmand, Hossein Damage Energy Evaluation in [55/-55]9 Composite Pipes using Acoustic Emission Method [Volume 2, Issue 2, 2015, Pages 127-134]
Saberi Varzaneh, Ali Study of Bond Strength between Polymer-Modified Mortars/Concrete and Their Mechanical Properties using “Friction-Transfer” and “Pull-off” Methods [Volume 8, Issue 1, 2021, Pages 171-184]
Sadati, Seyed Hossein Nonlinear Behavior of Honeycomb Structure Under Large Deformations Using Absolute Nodal Coordinate Formulation and Periodic Homogenization [Volume 14, Issue 1, 2027, Pages 1-17]
Sadeghian, M. Buckling Analysis of Functionally Graded Cylindrical Shells Under Mechanical and Thermal Loads by Dynamic Relaxation Method [Volume 7, Issue 2, 2020, Pages 297-311]
Sadeghian, Mostafa Experimental and Numerical Study on the Strength of Repaired Steel Pipes with Composite Patches under Internal Pressure [Volume 10, Issue 2, 2023, Pages 437-448]
Sadeghian, Mostafa Large Deflection Analysis of Graphene Sheets in the Thermal Environment Using Higher-Order Nonlocal Strain Gradient Principle [Volume 13, Issue 1, 2026, Pages 117-128]
Sadeghinezhad, M. S. Thermoelastic Analysis of Compressor Spool in Turbojet Engine and Redesign it Using Functionally Graded Materials with Opti-mal Coefficients [Volume 6, Issue 2, 2019, Pages 167-179]
Sadeghzadeh, Sadegh Study of Laminated Composite MEMS and NEMS Performance in Nano Metric Operations [Volume 4, Issue 1, 2017, Pages 19-31]
Sadeghzadeh, Sadegh Geometric Effects on Nanopore Creation in Graphene and on the Impact-withstanding Efficiency of Graphene Nanosheets [Volume 5, Issue 1, 2018, Pages 91-102]
Sadeghzadeh, Sadegh Sensitivity Analysis of Fiber-Reinforced Lamina Micro-Electro-Mechanical Switches with Nonlinear Vibration Using a Higher Order Hamiltonian Approach [Volume 5, Issue 1, 2018, Pages 25-39]
Sadeghzadeh, Sadegh Vibration Analysis of Circular Single-Layer Graphene Sheet Using Finite Element Method [Volume 6, Issue 2, 2019, Pages 131-138]
Sadr, Mohammad Homayoun Vibration Optimization of Fiber-Metal Laminated Composite Shallow Shell Panels Using an Adaptive PSO Algorithm [Volume 4, Issue 2, 2017, Pages 99-110]
Safarabadi, Majid Numerical Analysis of Thermal Buckling of Honeycomb Core Sandwich Panel under Thermal Loading [Volume 10, Issue 2, 2023, Pages 333-342]
Safari, Mehrdad Stress Analysis of FGM Rotating Disk Subjected to Mechanical and Thermal Loads In Aircraft Gas Turbine Engine [Volume 7, Issue 1, 2020, Pages 1-13]
Safari Naderi, Mohammad Hadi Delamination Analysis in Composite Root of a Carbon-Layer Reinforced Wind Turbine Blade [Volume 6, Issue 1, 2019, Pages 9-18]
Saffari, Hadi Size-dependent Vibration Analysis of Non-uniform Mass Sensor Nanobeams [Volume 8, Issue 2, 2021, Pages 235-244]
Sahi, Samira Elaboration and Characterization of Waste Inked Paper-Poly (Vinyl Chloride) Composites: Effect of Paper Deinking [Volume 13, Issue 1, 2026, Pages 57-68]
Sahoo, Bibhuti BhusanDielectric and Thermal Behaviour Analysis of Epoxy Composites Filled with Date Seed Particles Using Finite Element Method [Volume 13, Issue 2, 2026, Pages 347-355]
Sahoo, Sarmila Maximization of Fundamental Frequency of Composite Stiffened Hypar Shell with Cutout by Taguchi Method [Volume 10, Issue 1, 2023, Pages 43-54]
Sahu, Rakesh KumarThermo–Elastic Stresses and Deformation Analysis of FG Rotating Hollow Spherical Body [Volume 9, Issue 1, 2022, Pages 125-136]
Sai, Katuri Karthik Venkat Enhancement of Mechanical Properties of Coir, Kapok, and Hemp Fiber-Reinforced Epoxy Composites for a Variety of Applications [Volume 13, Issue 2, 2026, Pages 271-281]
Said, Mamouri Finite Element Analysis and Optimization of the Composite Plate Subjected to Close-Range Explosion [Volume 14, Issue 1, 2027, Pages 123-134]
Saini, Kuldeep Active Vibration Control of Laminated Composite Beam Operating in Thermal Environment using PZT-5H Patches [Volume 9, Issue 2, 2022, Pages 387-398]
Sajadian, Seyed Amir Vibration Response of a Sandwich Higher-Order Micro Beam based on Shear and Normal Deformation Theory on Kerr Elastic Foundation with Thickness Stretching Effect [Volume 12, Issue 3, 2025, Pages 645-670]
Sakiani, Hassan The Role of Natural Additives on the Wear and Friction Proper-ties of Nanocomposites for Friction Applications [Volume 6, Issue 2, 2019, Pages 159-165]
Sakri, Mahadev Reinforcement Surface Modification Effect on the Microstructure, Mechanical, and Tensile Fractography of Al2219 Alloy B4C Composites [Volume 13, Issue 1, 2026, Pages 197-210]
Salarkia, M.R. Size-dependent Effects on the Vibration Behavior of a Ti-moshenko Microbeam subjected to Pre-stress Loading based on DQM [Volume 3, Issue 2, 2016, Pages 99-112]
Salehi, Hamid RezaIn Situ Formation of SiC/CNT Ceramic Nanocomposite by Phenolic Pyrolysis [Volume 1, Issue 2, 2014, Pages 87-96]
Salehi, Manouchehr In Situ Formation of SiC/CNT Ceramic Nanocomposite by Phenolic Pyrolysis [Volume 1, Issue 2, 2014, Pages 87-96]
Salehi Kolahi, Mohammad Reza Elastic analysis of Shrink-fitted Thick FGM Cylinders Based on Linear Plane Elasticity Theory [Volume 7, Issue 1, 2020, Pages 121-127]
Salhi, Madiha Thermomechanical and Physical Properties of Plaster Concrete Reinforced with Natural Fibers [Volume 10, Issue 2, 2023, Pages 295-308]
Salmaniannezhad, Hassan Synthesis and Characterization of MgF2/Cu Coating on Aluminum Produced by Sputtering Technique [Volume 9, Issue 2, 2022, Pages 297-302]
Salmaniannezhad, Hossein Synthesis and Characterization of MgF2/Cu Coating on Aluminum Produced by Sputtering Technique [Volume 9, Issue 2, 2022, Pages 297-302]
Samanta, Lokanatha DhallDielectric and Thermal Behaviour Analysis of Epoxy Composites Filled with Date Seed Particles Using Finite Element Method [Volume 13, Issue 2, 2026, Pages 347-355]
Samarghandi, Mojtaba Optimization of Laser Surface Treatment Parameters on Shear Strength of Al/CFRP Adhesively Bonded Lap Joint [(Articles in Press)]
Samawati, Sadi Transient Thermal Stresses Analysis in a FPGM Cylinder [Volume 6, Issue 2, 2019, Pages 81-94]
Sanjarian, Sanaz Homogenisation-Based Analytical–Numerical Modelling of Orthogonal Trapezoidal Corrugated-Core Sandwich Panels [(Articles in Press)]
Sanyal, Shubhashis An Investigation of Stress and Deformation Behavior of Functionally Graded Timoshenko Beams subjected to Thermo-Mechanical Load [Volume 7, Issue 1, 2020, Pages 157-176]
Sarangi, Saroj KumarNonlinear Bending Behavior of Functionally Graded Plates Combined with Active Fiber Composites under Thermal Environment [Volume 8, Issue 2, 2021, Pages 299-308]
Saranraj, R. Optimization of Wear Behaviour on Mg-TiO2 Nanocomposite Using Taguchi Grey Relational Analysis [Volume 10, Issue 1, 2023, Pages 151-156]
Sari, Nasmi Herlina Pandanus Tectorius Fiber/ Rice Husk Powder as Green Reinforcement for Lightweight Composites: Evaluation of Impact Strength Properties and Thermal Stability [Volume 12, Issue 3, 2025, Pages 695-706]
Sari, Nasmi Herlina Optimizing Mahogany Peel Powder-Polyester Composites for Sustainable Automotive Interior Panels: Effects of Filler Content on Mechanical and Thermal Properties [Volume 13, Issue 2, 2026, Pages 439-450]
Sarkar, Susenjit Higher Order Approximations for Bending of FG Beams Using B-Spline Collocation Technique [Volume 11, Issue 1, 2024, Pages 159-176]
Sarkhosh, Reza EExperimental Evaluation of the Effect of Combining a Two-Phase Nano-Composite Containing AL2O3 and NbC in a Surface-Coated Resin Matrix: a Study Based on Dielectric Losses and Radar Reflectance [Volume 14, Issue 1, 2027, Pages 135-150]
Sattanathan, Muthuvel Mechanical Testing of Novel and Conventional Geopolymer Brick Dried under Passive Solar Dryer with Ferric Chloride Dihydrate as Phase Change Material [Volume 13, Issue 1, 2026, Pages 23-35]
Savafi, Saboor Nonlinear Free Vibration of Fluid-Filled Hyperelastic Cylindrical Shells Using Novozhilov Theory and Multiple Scales Method [(Articles in Press)]
Savvafi, Saboor Investigation of Free Vibration in Fluid-Loaded Cylindrical Shells with a Three-Layer Sandwich Wall and an Auxetic Central Layer [Volume 12, Issue 1, 2025, Pages 53-72]
Sawarkar, Sameer SubhashFunctionally Graded Piezoelectric Plates in Cylindrical Bending by Semi-analytical Approach [Volume 9, Issue 2, 2022, Pages 409-424]
Sayar, Hassan Health Monitoring for Composite under Low-Cycle Cyclic Loading, Considering Effects of Acoustic Emission Sensor Type [Volume 6, Issue 1, 2019, Pages 19-26]
Sayyad, Atteshamuddin S.A Quasi-3D Polynomial Shear and Normal Deformation Theory for Laminated Composite, Sandwich, and Functionally Graded Beams [Volume 4, Issue 2, 2017, Pages 139-152]
Sayyad, Atteshamuddin S.Higher-order Displacement Model for Cylindrical Bending of Laminated and Sandwich Plates Subjected to Environmental Loads [Volume 8, Issue 1, 2021, Pages 185-201]
Sayyad, Atteshamuddin S.A New Higher-Order Shear and Normal Deformation Theory for the Free Vibration Analysis of Laminated Shells [Volume 9, Issue 1, 2022, Pages 89-104]
Sayyad, Atteshamuddin S. Static Flexure of Soft Core Sandwich Beams using Trigonometric Shear Deformation Theory [Volume 2, Issue 1, 2015, Pages 45-53]
Sedighi, Mohammad Experimental Investigation of FGM Dental Implant Properties Made from Ti/HA Composite [Volume 4, Issue 3, 2017, Pages 233-237]
Selvamani, R. Assessment of Hydrostatic Stress and Thermo Piezoelectricity in a Laminated Multilayered Rotating Hollow Cylinder [Volume 8, Issue 1, 2021, Pages 77-86]
Selvamani, Rajendran Vibration in an Electrically Affected Hygro-magneto-thermo-flexo Electric Nanobeam Embedded in Winkler-Pasternak Foundation [Volume 8, Issue 2, 2021, Pages 401-414]
Selvaraj, Hariharan Complementary Split Ring Resonator-Inspired Antenna for Wearable Multiband Applications Using Biodegradable Polylactic Acid [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 339-352]
Seth, Tanmoy Generalized Thermoelastic Interactions Using an Eigenvalue Technique in a Transversely Isotropic Unbounded Medium with Memory Having a Line Heat Source [Volume 11, Issue 2, 2024, Pages 413-424]
Seth, Tanmoy State Space Approach to Moore-Gibson-Thompson Generalized Piezo-Thermoelasticity with Memory-Dependent Derivative [Volume 13, Issue 2, 2026, Pages 451-463]
Seyedraoufi, Seyedmahdi Simulation and Optimization of Fatigue Life of Carbon-Epoxy Composite Sub Frame [Volume 9, Issue 1, 2022, Pages 37-47]
Shabani, Yasin Buckling Analysis of Sandwich Structures with Metamaterials Core Integrated by Graphene Nanoplatelets Reinforced Polymer Composite [Volume 10, Issue 1, 2023, Pages 1-10]
Shabani, Yasin Static Buckling and Free Vibration Analysis of Bi-Dimensional FG Metal Ceramic Porous Beam [Volume 11, Issue 1, 2024, Pages 149-158]
Shabani Ammari, Amin Effects of Horizontal Deficiency Location on the Structural Behaviors of Steel SHS Short Columns Strengthened using CFRP [Volume 7, Issue 1, 2020, Pages 39-47]
Shafaee Fallah, Azita Experimental and Numerical Study on the Strength of Repaired Steel Pipes with Composite Patches under Internal Pressure [Volume 10, Issue 2, 2023, Pages 437-448]
Shah, Abhijeet Influence of Basalt/Carbon/Steel Fibers Addition on Flexural and Vibration Characteristics of Epoxy Granite [(Articles in Press)]
Shahbazi Karami, Javad An Investigation on Three-Point Bending of Foam-Filled Double Tubes and Parameter Optimization Using Response Surface Methodology [Volume 8, Issue 1, 2021, Pages 41-50]
Shahnazari, Mohammad Reza Capillary Effects on Surface Enhancement in a Non-Homogeneous Fibrous Porous Medium [Volume 5, Issue 1, 2018, Pages 83-90]
Shahrabi, A. Flexural Behavior of Fiber–Metal Laminates Reinforced with Surface-Functionalized Nanoclay [Volume 5, Issue 2, 2018, Pages 149-156]
Shahravi, Morteza An Analytical Approach to Thermoelastic Bending of Simply Supported Advanced Ribbed Composite Plates [Volume 5, Issue 2, 2018, Pages 173-185]
Shahriari, Behrooz Thermoelastic Analysis of Compressor Spool in Turbojet Engine and Redesign it Using Functionally Graded Materials with Opti-mal Coefficients [Volume 6, Issue 2, 2019, Pages 167-179]
Shahriari, Behrooz Stress Analysis of FGM Rotating Disk Subjected to Mechanical and Thermal Loads In Aircraft Gas Turbine Engine [Volume 7, Issue 1, 2020, Pages 1-13]
Shahriari, Behrooz Stress Analysis of the Rotating Carbon-Carbon Composite Disk of an Axial Compressor [Volume 10, Issue 2, 2023, Pages 271-282]
Shahryari, Mehran Numerical Analysis of Thermal Buckling of Honeycomb Core Sandwich Panel under Thermal Loading [Volume 10, Issue 2, 2023, Pages 333-342]
Shahsavari, Milad Numerical Investigation on Thermal Post-buckling Of Annular Sector Plates Made of FGM Via 3D Finite Element Method [Volume 8, Issue 2, 2021, Pages 309-320]
Shahsavari, Milad Tensile Strength Prediction of Glass/Epoxy Composite Structures Using Machine Learning and Response Surface Methodology [(Articles in Press)]
Shaikh, Asad A.Finite Element Analysis of Mechanical Properties of Basalt-Carbon Epoxy Hybrid Laminates [Volume 9, Issue 2, 2022, Pages 263-274]
Shaikh, Javed Sikandar Mechanical and Tribological Characterization of Eco-Friendly Brake Pads Using Banana Peel Powder as a Sustainable Friction Material [Volume 13, Issue 2, 2026, Pages 427-437]
Shakooeea, F. Synthesis and Characterization of Polymer/Nanosilicagel Nano-composites [Volume 4, Issue 1, 2017, Pages 1-8]
Shakouri, M. Dynamic Characteristics of Joined Steel and Carbon Fiber-Reinforced Plastic Tubes: Experimental and Numerical Investigation [Volume 4, Issue 2, 2017, Pages 88-97]
Shankara Reddy, R. Experimental and Numerical Analysis of Woven Bamboo and Jute Fiber Reinforced in Epoxy Composites [Volume 11, Issue 1, 2024, Pages 103-118]
Shanmugam, Suresh Kumar Optimization of AA6351-SiC-B4C Hybrid Composites in Wire EDM Using Grey Relation Technique [Volume 11, Issue 2, 2024, Pages 385-400]
Shanmugam, Vigneshwaran Thrust Force and Delamination Analysis on Redmud-Filled Coconut Sheath Fiber Polyester Composite [Volume 12, Issue 1, 2025, Pages 43-52]
Shantappa Gurbasappa, Sangashetty Experimental Study of Woven Glass, Bamboo, and Jute Fibre Reinforced in Epoxy Composites [Volume 14, Issue 1, 2027, Pages 41-56]
Shariati, Mahmoud Experimental Study on Amine-Functionalized Carbon Nanotubes’ Effect on the Thermomechanical Properties of CNT/Epoxy Nano-composites [Volume 5, Issue 1, 2018, Pages 41-48]
Shariati, Mahmoud Large Deflection Analysis of Graphene Sheets in the Thermal Environment Using Higher-Order Nonlocal Strain Gradient Principle [Volume 13, Issue 1, 2026, Pages 117-128]
Shariati-Nia, Mostafa Modal Characteristics of Composite Beams with Single Delamination- A Simple Analytical Technique [Volume 1, Issue 2, 2014, Pages 97-106]
Sharifzadeh, Fatemeh Mechanical and Physical Properties of Glass-Fiber Reinforced Polymer Rods Manufactured by Different Pultrusion Methods [Volume 8, Issue 1, 2021, Pages 99-107]
Shariyat, Mohammad The Effects of the Moving Load and the Attached Mass-Spring-Damper System Interactions on the Dynamic Responses of the Composite Plates: An Analytical Approach [Volume 2, Issue 1, 2015, Pages 17-30]
Sharma, Apurbba Kumar Design and Development of a Pine Needle Briquetting Machine for the Uttarakhand Region of India [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 293-303]
Sharma, Avinash Mechanical and Physical Properties Observations for Cu-Gr-SiC Composite Synthesized by Powder Metallurgy [Volume 13, Issue 2, 2026, Pages 339-345]
Sharma, Harish KumarInitial Buckling Behavior of Elastically Supported Rectangular FGM Plate based on Higher Order Shear Deformation Theory via Spline RBF Method [Volume 11, Issue 1, 2024, Pages 59-72]
Sharma, Ramesh Suryanarayana Influence of Kevlar on Impact Damage Assessment of Carbon Fiber Hybrid Composite Laminate [Volume 12, Issue 3, 2025, Pages 497-505]
Sharma, Ramesh Suryanarayana Performance Evaluation of Epoxy-Based Natural Composites Reinforced with Flax and Flax-Ramie Fiber [Volume 13, Issue 1, 2026, Pages 13-22]
Sharma, Sumit Kumar Vibration Analysis of FGM Annular Plate with Linearly Varying Thickness for Several Boundary Conditions [Volume 13, Issue 2, 2026, Pages 475-494]
Sheakholeslami, Mohammadreza Numerical Optimization of Non-destructive Ultrasonic Testing in Identifying Defects in Composite Structure of Pine Tree Trunk [Volume 11, Issue 1, 2024, Pages 249-258]
Sheikhi Azqandi, Mojtaba A Novel Hybrid Genetic Modified Colliding Bodies Optimization for Designing of Composite Laminates [Volume 8, Issue 1, 2021, Pages 203-212]
Sheikhi Azqandi, Mojtaba Optimization of Laser Surface Treatment Parameters on Shear Strength of Al/CFRP Adhesively Bonded Lap Joint [(Articles in Press)]
Shelesh-Nezhad, Karim A Study of the Effect of TPU and Clay Nanoparticles on the Mechanical Behavior of PBT-Based Nanocomposites [Volume 4, Issue 3, 2017, Pages 179-186]
Shelesh-Nezhad, Karim Numerical Simulation of a Hybrid Nanocomposite Containing Ca-CO3 and Short Glass Fibers Subjected to Tensile Loading [Volume 4, Issue 2, 2017, Pages 117-125]
Sheorey, Tanuja Integration of Artificial Neural Network and Taguchi Method for Prediction and Minimisation of Thick-Walled Polypropylene Gear Shrinkage [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 249-260]
Sheykholeslami, Mohammad Reza Parametric Investigation of Particle Movements in Ultrasonic Levitation Process Using Piezoelectric Materials [Volume 13, Issue 2, 2026, Pages 357-369]
Shinde, Bharti M.A Quasi-3D Polynomial Shear and Normal Deformation Theory for Laminated Composite, Sandwich, and Functionally Graded Beams [Volume 4, Issue 2, 2017, Pages 139-152]
Shinde, Bharti M.A New Higher-Order Shear and Normal Deformation Theory for the Free Vibration Analysis of Laminated Shells [Volume 9, Issue 1, 2022, Pages 89-104]
Shirdel, Hadi Optimization of Hybrid Composite Laminate Based on the Frequency using Imperialist Competitive Algorithm [Volume 1, Issue 1, 2014, Pages 37-48]
Shojaei, Keyvan Stress Analysis of the Rotating Carbon-Carbon Composite Disk of an Axial Compressor [Volume 10, Issue 2, 2023, Pages 271-282]
Shokrgozar, Mohammadreza Low-velocity Impact Response of Viscoelastic Composite Laminates Considering Large Deflection and Higher-order Shear Deformation [Volume 8, Issue 2, 2021, Pages 425-434]
Shokrian, Minoo Dokht Numerical Simulation of a Hybrid Nanocomposite Containing Ca-CO3 and Short Glass Fibers Subjected to Tensile Loading [Volume 4, Issue 2, 2017, Pages 117-125]
Shokrieh, M. Size Effect on the Damaged Areas of Glass/Epoxy Structures under Low Velocity Impact [Volume 1, Issue 2, 2014, Pages 81-85]
Shokrieh, Mahmood MehrdadMechanical Properties of Graphene/Epoxy Nanocomposites under Static and Flexural Fatigue Loadings [Volume 1, Issue 1, 2014, Pages 1-7]
Siadati, S.M.H. Flexural Behavior of Fiber–Metal Laminates Reinforced with Surface-Functionalized Nanoclay [Volume 5, Issue 2, 2018, Pages 149-156]
Siahpush, Ali Size-dependent Electro-Mechanical Vibration Analysis of FGPM Composite Plates using Modified Shear Deformation Theories [Volume 8, Issue 1, 2021, Pages 157-169]
Sidamar, Lamsadfa Finite Element Analysis and Optimization of the Composite Plate Subjected to Close-Range Explosion [Volume 14, Issue 1, 2027, Pages 123-134]
Sid Amer, Youcef Failure Probability Analysis of Composite Pressure Tanks Using Subset Simulation [Volume 11, Issue 2, 2024, Pages 363-374]
Siddique, Abu BakarMaterial Mechanical Properties Prediction of Layer with Multidirectional Fiber Ply Reinforced Polymer Matrix Composites [Volume 9, Issue 2, 2022, Pages 221-227]
Siengchin, Suchart Pandanus Tectorius Fiber/ Rice Husk Powder as Green Reinforcement for Lightweight Composites: Evaluation of Impact Strength Properties and Thermal Stability [Volume 12, Issue 3, 2025, Pages 695-706]
Singh, Anjani KumarInfluences of skewness on the natural frequency of elastically supported skew laminated plate using MQRBF collocation approach. [(Articles in Press)]
Singh, Bhavana Investigation of the Mechanical and Tribological Behaviour of Al Alloy and Al/ZrO2Ex-Situ Nano Composites [Volume 14, Issue 1, 2027, Pages 19-26]
Singh, Dalbir Influence of Filler Content on the Mechanical, Thermal, Moisture Absorption, and Biodegradability Properties of Bionanocomposite with Cellulosic Fibers Derived from Delonix Regia Fruits [Volume 11, Issue 1, 2024, Pages 73-86]
Singh, Harpreet Integration of Artificial Neural Network and Taguchi Method for Prediction and Minimisation of Thick-Walled Polypropylene Gear Shrinkage [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 249-260]
Singh, Inderdeep Design and Development of a Pine Needle Briquetting Machine for the Uttarakhand Region of India [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 293-303]
Singh, Jeeoot A Meshfree Approach for Bending Analysis of Porous Rectangular FGM Plate Resting on Elastic Foundation [Volume 9, Issue 2, 2022, Pages 303-316]
Singh, Jeeoot Assessment of RBFs Based Meshfree Method for the Vibration Response of FGM Rectangular Plate Using HSDT Model [Volume 10, Issue 1, 2023, Pages 137-150]
Singh, Jeeoot Meshfree Approach for the Torsional Analysis of Orthotropic and FGM Thin-Walled Open Sections [Volume 12, Issue 3, 2025, Pages 629-644]
Singh, Jigyasa A Meshfree Approach for Bending Analysis of Porous Rectangular FGM Plate Resting on Elastic Foundation [Volume 9, Issue 2, 2022, Pages 303-316]
Singh, Jigyasa Vibration and Buckling Analysis of Skew Sandwich Plate using Radial Basis Collocation Method [Volume 10, Issue 2, 2023, Pages 383-392]
Singh, Mukesh A Meshfree Approach for Bending Analysis of Porous Rectangular FGM Plate Resting on Elastic Foundation [Volume 9, Issue 2, 2022, Pages 303-316]
Singh, Rakesh Polyester/Kota Stone Dust Composite: A Comprehensive Investigation of Mechanical and Sliding Wear Properties [Volume 11, Issue 2, 2024, Pages 375-384]
SINGH, JEEOOT Influences of skewness on the natural frequency of elastically supported skew laminated plate using MQRBF collocation approach. [(Articles in Press)]
Singhal, Abhinav Analysis of SH-waves Propagating in Multiferroic Structure with Interfacial Imperfection [Volume 9, Issue 1, 2022, Pages 1-10]
Singsang, Witawat Mechanical Properties of Hemp Fiber-Reinforced Polypropylene Composites for Drone Propeller Guard Application [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 271-277]
Singsang, Witawat The Impact of Fiber Architecture on the Mechanical Properties of Hand Lay-up Reinforced Polyester Resin [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 393-400]
Singsang, Witawat Biodegradation, Mechanical and Physical Properties of Poly(butylene succinate) and Natural Rubber Compound Blend Filled with Activated Carbon from Coconut Fruit [Volume 13, Issue 1, 2026, Pages 157-169]
Singsang, Witawat Eco-Friendly Prefabricated Vertical Drains from PBS/NRC Blends: Tensile Properties and Biodegradation [(Articles in Press)]
Siriyanna, Manjunath Yadav Reinforcement Surface Modification Effect on the Microstructure, Mechanical, and Tensile Fractography of Al2219 Alloy B4C Composites [Volume 13, Issue 1, 2026, Pages 197-210]
Sittitanadol, Ing-orn Mechanical Properties of Hemp Fiber-Reinforced Polypropylene Composites for Drone Propeller Guard Application [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 271-277]
Sittitanadol, Ing-orn The Impact of Fiber Architecture on the Mechanical Properties of Hand Lay-up Reinforced Polyester Resin [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 393-400]
Sittitanadol, Ing-orn Biodegradation, Mechanical and Physical Properties of Poly(butylene succinate) and Natural Rubber Compound Blend Filled with Activated Carbon from Coconut Fruit [Volume 13, Issue 1, 2026, Pages 157-169]
Sittitanadol, Ing-orn Characterization of Physical and Mechanical Properties, and Morphology of Wood Composites Derived from Milk Bottles and Teak Sawdust Powder [Volume 13, Issue 2, 2026, Pages 259-269]
Sittitanadol, Ing-orn Eco-Friendly Prefabricated Vertical Drains from PBS/NRC Blends: Tensile Properties and Biodegradation [(Articles in Press)]
Sivagangai, Thillaisekar Experimental Investigation of Repair of Glass Epoxy Composite with Edge and Center Crack by Epoxy Resin [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 371-377]
Sivaprakasam, Rajakarunakaran Studies on Progress of Aluminum Based Composites for Automotive Applications and its Damping Characteristics – A Review [Volume 12, Issue 1, 2025, Pages 25-42]
Sivaprakasam, Rajakarunakaran An Overview of Progression and Recent Trends in Additively Manufactured AlSi10Mg Alloy through Scientometrics [Volume 12, Issue 3, 2025, Pages 707-726]
Sivtseva-Gladkina, Natalia Climatic Testing of Polytetrafluoroethylene Based Composites [(Articles in Press)]
Sliman, Jemaa Thermomechanical and Physical Properties of Plaster Concrete Reinforced with Natural Fibers [Volume 10, Issue 2, 2023, Pages 295-308]
S.M., Syaizwadi Green Anticorrosion Coating with Low VOCs Emission using Moringa Oleifera Leaves Extract [Volume 9, Issue 1, 2022, Pages 163-171]
Smirnov, Sergey Effect of the Nature of Oxide Nanofillers on Changes in the Mechanical Properties of Epoxy Coatings under Thermal Cycling [Volume 10, Issue 1, 2023, Pages 195-204]
Smirnova, Evgeniy Effect of the Nature of Oxide Nanofillers on Changes in the Mechanical Properties of Epoxy Coatings under Thermal Cycling [Volume 10, Issue 1, 2023, Pages 195-204]
Sobhani, Manoochehr Microwave-Assisted Two-Step Sintering of Al/8wt%TiC Composite Prepared by Powder Metallurgy [Volume 8, Issue 2, 2021, Pages 291-298]
Sohani, Mohammad Hossein Large Deformation Elastic Analysis of Pressurized FGM Thick Cylindrical Shells with Nonlinear Plane Elasticity Theory (NPET) [Volume 12, Issue 1, 2025, Pages 129-140]
Soheil Shamaee, Mahsa Minimal Mass and Maximal Buckling Load of Composite Hexagonal-Triangle Grid Structure using FSDT under External Hydrostatic Pressure [Volume 10, Issue 2, 2023, Pages 309-318]
Soheil Shamaee, Mahsa A Comprehensive Comparison between Multi-Objective Optimization Methods for Composite Hexagonal-Triangle Grid Structure using FSDT under External Hydrostatic Pressure [Volume 11, Issue 1, 2024, Pages 177-190]
Sohrabi, Habib Using the Taguchi Method for Experimental and Numerical Investigations on the Square-Cup Deep-Drawing Process for Aluminum/Steel Laminated Sheets [Volume 4, Issue 2, 2017, Pages 169-177]
Solanki, Bikram Singh Integration of Artificial Neural Network and Taguchi Method for Prediction and Minimisation of Thick-Walled Polypropylene Gear Shrinkage [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 249-260]
Soleimanian, Sina Theoretical, numerical, and experimental analyses of free vibrations of glass fiber reinforced polymer plates with central cutouts and free boundaries [Volume 5, Issue 1, 2018, Pages 67-74]
Soleimanian, Sina Thermal Buckling and Thermal Induced free Vibration Analysis of Perforated Composite Plates: a Mathematical Model [Volume 7, Issue 1, 2020, Pages 15-23]
Soleimanimehr, Hamid Experimental Analysis of the Effect of Mechanical Topology on the Surface of Biological Microgripper Made of Ionic-Polymer Metal Composite Smart Material [Volume 13, Issue 1, 2026, Pages 143-156]
Soleimanimehr, Hamid Reduction of Biaxial Bending and Torsion in Ionic Polymer-Metal Actuators through Symmetric Voltage Distribution and Improved Boundary Conditions [(Articles in Press)]
Soltani, Masoumeh Finite Element Modeling for Buckling Analysis of Tapered Axially Functionally Graded Timoshenko Beam on Elastic Foundation [Volume 7, Issue 2, 2020, Pages 203-218]
Soltani, Masoumeh A Novel Approach for Lateral Buckling Assessment of Double Tapered Thin-Walled Laminated Composite I-Beams [Volume 9, Issue 1, 2022, Pages 11-23]
Soltani, Masoumeh Buckling Analysis of Sandwich Timoshenko Nanobeams with AFG Core and Two Metal Face-Sheets [Volume 10, Issue 2, 2023, Pages 319-332]
Soltanimaleki, Arman Frequency Analysis of Functionally Graded Carbon Nanotube-reinforced Cylindrical Panels by Mesh-free Galerkin Method [Volume 8, Issue 2, 2021, Pages 415-424]
Somdee, Patcharapon Biodegradation, Mechanical and Physical Properties of Poly(butylene succinate) and Natural Rubber Compound Blend Filled with Activated Carbon from Coconut Fruit [Volume 13, Issue 1, 2026, Pages 157-169]
Somdee, Patcharapon Characterization of Physical and Mechanical Properties, and Morphology of Wood Composites Derived from Milk Bottles and Teak Sawdust Powder [Volume 13, Issue 2, 2026, Pages 259-269]
Somdee, Patcharapon Eco-Friendly Prefabricated Vertical Drains from PBS/NRC Blends: Tensile Properties and Biodegradation [(Articles in Press)]
Sondhi, Lakshman Thermo–Elastic Stresses and Deformation Analysis of FG Rotating Hollow Spherical Body [Volume 9, Issue 1, 2022, Pages 125-136]
Soroush, Majid Free Vibration Analysis of Combined Cylindrical-Conical Composite Shells using First-Order Shear Deformation Theory [Volume 8, Issue 2, 2021, Pages 269-282]
Srakaew, Nuan La-ong Biodegradation, Mechanical and Physical Properties of Poly(butylene succinate) and Natural Rubber Compound Blend Filled with Activated Carbon from Coconut Fruit [Volume 13, Issue 1, 2026, Pages 157-169]
Srakaew, Nuan La-ong Characterization of Physical and Mechanical Properties, and Morphology of Wood Composites Derived from Milk Bottles and Teak Sawdust Powder [Volume 13, Issue 2, 2026, Pages 259-269]
Srinivasa, Chikkol V.Experimental and Finite Element Studies on Free Vibration of Areca Leaf Sheath Reinforced Polymer Composites [Volume 8, Issue 2, 2021, Pages 367-388]
Srinivasan, saranya Complementary Split Ring Resonator-Inspired Antenna for Wearable Multiband Applications Using Biodegradable Polylactic Acid [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 339-352]
Srinivasan, Saranya Design and Analysis of Complementary Split Ring Resonator Based Low Profile Antenna Using Lightweight Polymers for Wireless, Radar and Satellite Communication [Volume 12, Issue 3, 2025, Pages 569-584]
Srivastava, Manish ChandAssessment of RBFs Based Meshfree Method for the Vibration Response of FGM Rectangular Plate Using HSDT Model [Volume 10, Issue 1, 2023, Pages 137-150]
Srivastava, Yash Initial Buckling Behavior of Elastically Supported Rectangular FGM Plate based on Higher Order Shear Deformation Theory via Spline RBF Method [Volume 11, Issue 1, 2024, Pages 59-72]
Stojanović, Blaža Structural Analysis of Composite Material Disk Brakes [(Articles in Press)]
Stolin, Alexander Climatic Testing of Polytetrafluoroethylene Based Composites [(Articles in Press)]
Subbarayan, Sathiyamurthy Modeling and Numerical Prediction on Mechanical Behaviors of Hybrid Fiber Reinforced Polymer Bio Composites Using Fuzzy Logic Algorithm [Volume 12, Issue 1, 2025, Pages 199-210]
Subravel, Visvalingam Prediction and Parametric Effect in Drilling of Natural Fiber Laminate Using Combined Taguchi- Artificial Neural Network Approach [Volume 13, Issue 2, 2026, Pages 415-426]
Sujita, . Pandanus Tectorius Fiber/ Rice Husk Powder as Green Reinforcement for Lightweight Composites: Evaluation of Impact Strength Properties and Thermal Stability [Volume 12, Issue 3, 2025, Pages 695-706]
Suksiripattanapong, cherdsak Eco-Friendly Prefabricated Vertical Drains from PBS/NRC Blends: Tensile Properties and Biodegradation [(Articles in Press)]
Suleiman, Rami Khalid Mohammad Finite Element Analysis and Optimization of the Composite Plate Subjected to Close-Range Explosion [Volume 14, Issue 1, 2027, Pages 123-134]
Sultana, Mafruza Analysis of SH-waves Propagating in Multiferroic Structure with Interfacial Imperfection [Volume 9, Issue 1, 2022, Pages 1-10]
Sundaram, Kathiravan Studies on Progress of Aluminum Based Composites for Automotive Applications and its Damping Characteristics – A Review [Volume 12, Issue 1, 2025, Pages 25-42]
Sundaresan, Thirumalai Kumaran Optimization of AA6351-SiC-B4C Hybrid Composites in Wire EDM Using Grey Relation Technique [Volume 11, Issue 2, 2024, Pages 385-400]
SUNDER, SHYAM Fabrication and Characterization of Polymer Composites Reinforced with Recycled Printed Circuit Board (PCB) Fillers [(Articles in Press)]
Sur, Abhik Elasto-Thermodiffusive Response in a Two-Dimensional Transversely Isotropic Medium [Volume 6, Issue 2, 2019, Pages 95-104]
Sur, Abhik Thermoelastic Interaction in a Three-Dimensional Layered Sandwich Structure [Volume 5, Issue 2, 2018, Pages 187-198]
Suteja, . Pandanus Tectorius Fiber/ Rice Husk Powder as Green Reinforcement for Lightweight Composites: Evaluation of Impact Strength Properties and Thermal Stability [Volume 12, Issue 3, 2025, Pages 695-706]
Suteja, Suteja Optimizing Mahogany Peel Powder-Polyester Composites for Sustainable Automotive Interior Panels: Effects of Filler Content on Mechanical and Thermal Properties [Volume 13, Issue 2, 2026, Pages 439-450]
Swamy, Deepak Influence of Kevlar on Impact Damage Assessment of Carbon Fiber Hybrid Composite Laminate [Volume 12, Issue 3, 2025, Pages 497-505]
T
Tabaghi, Armi Deposition of an Al/SiC Composite Coating on Steel by Friction Surfacing: Corrosion and Wear Properties [Volume 9, Issue 2, 2022, Pages 287-296]
Tabakov, Pavel Yaroslavovich Stacking-Sequence Optimization and Buckling Analysis of Graphene/Fiber-Reinforced Laminated Plates [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 413-424]
Tabatabaeian, Ali Buckling analysis of FML cylindrical shells under combined axial and torsional loading [Volume 7, Issue 2, 2020, Pages 263-270]
Tadi Beni, Yaghub Frequency Analysis of Functionally Graded Carbon Nanotube-reinforced Cylindrical Panels by Mesh-free Galerkin Method [Volume 8, Issue 2, 2021, Pages 415-424]
Taghavian, Hossein Statistical Analysis of Delamination Effect on Natural Frequency of Composite Laminated Plate [Volume 13, Issue 1, 2026, Pages 129-142]
Taghipoor, Hossein Analyzing and Improving Flexural and Impact Strength of Composites Enhanced with Nanoparticles and Natural Fibers [Volume 11, Issue 2, 2024, Pages 467-482]
Taghipoor, Hossein Enhancing Mechanical Properties of Polypropylene Composites Reinforced with Date Palm Fiber Using Maleic Anhydride Grafted Polypropylene as a Compatibilizer [Volume 13, Issue 1, 2026, Pages 211-226]
Taghipoor, Hossein Development and Characterization of a High-Performance Polyurethane-Based Colored Pavement Binder Including Calcium Carbonate and Polyethylene Glycol for Improved Thermal and Mechanical Durability [(Articles in Press)]
Taheri, Moein Sensitivity Analysis of Vibrating Laminated Composite Rec-tangular Plates in Interaction with Inviscid Fluid Using EFAST Method [Volume 7, Issue 2, 2020, Pages 219-231]
Taheri, Moein Size-dependent Vibration Analysis of Non-uniform Mass Sensor Nanobeams [Volume 8, Issue 2, 2021, Pages 235-244]
Taherian, Z. The Effect of Processing Conditions on the Mechanical Properties of Polypropylene/Mesoporous Silica-Hydroxyapatite Hybrid Nanocomposites [Volume 3, Issue 2, 2016, Pages 73-82]
Taheri-Behrooz, F. Size Effect on the Damaged Areas of Glass/Epoxy Structures under Low Velocity Impact [Volume 1, Issue 2, 2014, Pages 81-85]
Tahouneh, Vahid A Semi-analytical Solution for 3-D Dynamic Analysis of Thick Continuously Graded Carbon Nanotube-reinforced Annular Plates Resting on a Two-parameter Elastic Foundation [Volume 1, Issue 2, 2014, Pages 113-130]
Tahouneh, Vahid Three-dimensional elasticity solution for vibrational analysis of thick continuously graded sandwich plates with different boundary conditions using a two-parameter micromechanical model for agglomeration [Volume 5, Issue 1, 2018, Pages 49-66]
Tajali, Mohammad Synthesis and Characterization of Polymer/Nanosilicagel Nano-composites [Volume 4, Issue 1, 2017, Pages 1-8]
Takhayor Ardestani, Masoud The Effect of Temperature Dependency on the Thermo-Electro-Elastic Analysis of Functionally Graded Piezoelectric Spherical Shell [Volume 6, Issue 1, 2019, Pages 1-8]
Talebi, Amir Microstructure, Mechanical and Electrical Properties of Copper Matrix Composites Reinforced with Steel Nanoparticles [Volume 8, Issue 2, 2021, Pages 335-345]
Talebitoot, Roohollah Simulation and Optimization of Fatigue Life of Carbon-Epoxy Composite Sub Frame [Volume 9, Issue 1, 2022, Pages 37-47]
Tamboli, Shahid Tensile, Flexural, and Impact Strength Analysis of a 3D Printed Carbon Fiber Reinforced Nylon Filament [Volume 12, Issue 3, 2025, Pages 615-627]
Tamboli, Shahid Lattice Structure Optimization of 3D Printed TPMS under Different Loading Conditions Using Regression Machine Learning [Volume 12, Issue 3, 2025, Pages 597-613]
Tarahomi, S. The Effect of Processing Conditions on the Mechanical Properties of Polypropylene/Mesoporous Silica-Hydroxyapatite Hybrid Nanocomposites [Volume 3, Issue 2, 2016, Pages 73-82]
Tarasova, Praskovia Climatic Testing of Polytetrafluoroethylene Based Composites [(Articles in Press)]
Tavakoli, Hossein Deposition of an Al/SiC Composite Coating on Steel by Friction Surfacing: Corrosion and Wear Properties [Volume 9, Issue 2, 2022, Pages 287-296]
Tee, Kong Fah Failure Probability Analysis of Composite Pressure Tanks Using Subset Simulation [Volume 11, Issue 2, 2024, Pages 363-374]
Thakur, Ajaykumar Geometrically Nonlinear Analysis of Laminated Composite Plates subjected to Uniform Distributed Load Using a New Hypothesis: the finite element method (FEM) Approach [Volume 7, Issue 2, 2020, Pages 271-285]
Thavittupalayam Angappana, Karthikeyan Patch Antennas with PDMS Substrate to Detect Tumors and their Data Transmission through ERPO-OFDM Modulation Technique in VLC [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 401-411]
Thawait, Amit KumarThermo–Elastic Stresses and Deformation Analysis of FG Rotating Hollow Spherical Body [Volume 9, Issue 1, 2022, Pages 125-136]
Tizfahm, Akbar Low-velocity Impact Response of Viscoelastic Composite Laminates Considering Large Deflection and Higher-order Shear Deformation [Volume 8, Issue 2, 2021, Pages 425-434]
Todkar, Amol Optimizing the Design and Conducting Comparative Testing for a Composite Elliptical Leaf-spring Damper [(Articles in Press)]
Torabi, Keyvan Modal Characteristics of Composite Beams with Single Delamination- A Simple Analytical Technique [Volume 1, Issue 2, 2014, Pages 97-106]
Torabizadeh, Mohammad Amin A Numerical and Analytical Solution for the Free Vibration of Laminated Composites Using Different Plate Theories [Volume 4, Issue 1, 2017, Pages 75-87]
Torabizadeh, Mohammad Amin Low-Velocity Impact Behavior of Foam Core Sandwich Panels with Different Face Sheet Layers: Numerical and Experimental Study [Volume 10, Issue 1, 2023, Pages 111-122]
Torabizadeh, Mohammad Amin Applying an Artificial Neural Network to Predict the Mechanical Properties of Epoxy Resin with Graphite Additive After Water Absorption [Volume 13, Issue 1, 2026, Pages 245-257]
Torangi, Mohammad Ali Development and Characterization of a High-Performance Polyurethane-Based Colored Pavement Binder Including Calcium Carbonate and Polyethylene Glycol for Improved Thermal and Mechanical Durability [(Articles in Press)]
T R, Veena Advancing Sustainable Mobility Through Hybrid Kenaf–Cenosphere Reinforced Epoxy Composites: Integrated Assessment of Mechanical Performance, Lightweighting, Sustainability, and Cost Efficiency [(Articles in Press)]
Tran, Trung Thanh A Finite Element Formulation for Analyzing the Nonlinear Static Response of Bi-functionally Graded Microbeam Resting on Elastic Foundation Under Various Loads [Volume 13, Issue 1, 2026, Pages 227-243]
Trivedi, Vaibhav Investigation of the Mechanical and Tribological Behaviour of Al Alloy and Al/ZrO2Ex-Situ Nano Composites [Volume 14, Issue 1, 2027, Pages 19-26]
Tumkur Sadashivaiah, Mohan Kumar Comparative Study on Impact Responses of Sandwich Composites with Stiff and Compliant Core Materials [Volume 12, Issue 3, 2025, Pages 483-496]
U
Ubale, Deepak DInfluence of Basalt/Carbon/Steel Fibers Addition on Flexural and Vibration Characteristics of Epoxy Granite [(Articles in Press)]
Uniyal, Purva Comparative Investigation of Epoxy-terminated and Carboxyl-terminated Butadiene Nitrile Rubber for Toughened Epoxy Resins [Volume 14, Issue 1, 2027, Pages 99-122]
Ushkanov, Alexander Climatic Testing of Polytetrafluoroethylene Based Composites [(Articles in Press)]
Usman, Mohammed Characterization of Thevetia Peruviana (Yellow Oleander) Shell Ash Powder as a Possible Filler in Polymer Composites [Volume 8, Issue 1, 2021, Pages 109-117]
V
V., Murari Crashworthy Behavior of Plain Weave Glass/Epoxy Composite Tubes Containing Different Extents of Overlap of Dropped Plies [Volume 11, Issue 1, 2024, Pages 87-102]
Vaezi, Mehdi Experimental Investigation on Quasi-Static Impact Response of Glass/Epoxy Composite Corrugated Core Sandwich Panels [Volume 10, Issue 2, 2023, Pages 283-294]
Vahabi Meibodi, Mohammad Hossein Experimental Study of Buckling of Reinforced Conical Composite Shell Under Hydrostatic Loading [Volume 9, Issue 2, 2022, Pages 359-366]
Vahedi, Sh. Flexural Behavior of Fiber–Metal Laminates Reinforced with Surface-Functionalized Nanoclay [Volume 5, Issue 2, 2018, Pages 149-156]
Valukula, Balaraj Effect of Ceramic Boron Carbide Particles Addition on the Mechanical and Microstructural Characteristics of Al7020 Alloy Composites [Volume 12, Issue 1, 2025, Pages 169-180]
Varadharaj, Raja Effect of Aspect Ratio on the Workability of AA6082/Metakaolin/Nano Silicon Nitride Composites: An Experimental Investigation and Predictive Modeling using RSM and ANN [Volume 14, Issue 1, 2027, Pages 217-236]
Veerasimman, Arumugaprabu Thrust Force and Delamination Analysis on Redmud-Filled Coconut Sheath Fiber Polyester Composite [Volume 12, Issue 1, 2025, Pages 43-52]
Velmurugan, Samikkannu Prediction and Parametric Effect in Drilling of Natural Fiber Laminate Using Combined Taguchi- Artificial Neural Network Approach [Volume 13, Issue 2, 2026, Pages 415-426]
Venkatalakshmi, Nathi Free Vibration Analysis of Simply Supported and Clamped Functionally Graded Rectangular Plate Using Coupled Displacement Field Method [Volume 12, Issue 1, 2025, Pages 73-84]
Veretennikova, Irina Effect of the Nature of Oxide Nanofillers on Changes in the Mechanical Properties of Epoxy Coatings under Thermal Cycling [Volume 10, Issue 1, 2023, Pages 195-204]
Victor, Emilda Irudhaya Mari Design and Analysis of Complementary Split Ring Resonator Based Low Profile Antenna Using Lightweight Polymers for Wireless, Radar and Satellite Communication [Volume 12, Issue 3, 2025, Pages 569-584]
Vijaya Kumar, Vignesh Kumar An Overview of Progression and Recent Trends in Additively Manufactured AlSi10Mg Alloy through Scientometrics [Volume 12, Issue 3, 2025, Pages 707-726]
Vijayalakshmi, Anitha Patch Antennas with PDMS Substrate to Detect Tumors and their Data Transmission through ERPO-OFDM Modulation Technique in VLC [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 401-411]
Viliani, N. Reduction of Biaxial Bending and Torsion in Ionic Polymer-Metal Actuators through Symmetric Voltage Distribution and Improved Boundary Conditions [(Articles in Press)]
Visariya, Jainil Quick Review and Assessment of Thermal Stress Analyses for Exact and Assumed Temperature Distribution for Composite and Sandwich Laminates [Volume 10, Issue 2, 2023, Pages 343-362]
Viswanathan, Vinoth Modeling and Numerical Prediction on Mechanical Behaviors of Hybrid Fiber Reinforced Polymer Bio Composites Using Fuzzy Logic Algorithm [Volume 12, Issue 1, 2025, Pages 199-210]
Vora, Tanmay Quick Review and Assessment of Thermal Stress Analyses for Exact and Assumed Temperature Distribution for Composite and Sandwich Laminates [Volume 10, Issue 2, 2023, Pages 343-362]
Vossough, Ali Reza Nonlinear Magneto-Nonlocal Vibration Analysis of Coupled Piezoelectric Micro-Plates Reinforced with Agglomerated CNTs [Volume 7, Issue 1, 2020, Pages 109-119]
Vyas, Chandreshkumar JayantilalMechanical Characterization of Glass-Basalt Hybrid Composites with Different Fiber Weight Fraction [Volume 11, Issue 2, 2024, Pages 295-308]
Vyas, Chandreshkumar Jayantilal Experimental Evaluation of Low-Velocity Impact Performance of Glass–Basalt Hybrid Composites: Influence of Fiber Weight Fraction and Impact Energy Levels [Volume 14, Issue 1, 2027, Pages 267-282]
W
Waghmare, Arati Arvind Thermal Behaviour and Coupling Effects in Laminated Composite Beam Structures Using Refined Shear Deformation Theory [Volume 14, Issue 1, 2027, Pages 199-216]
Walter, Janusz Optimization of AA6351-SiC-B4C Hybrid Composites in Wire EDM Using Grey Relation Technique [Volume 11, Issue 2, 2024, Pages 385-400]
Wardani, Deni Optimizing Mahogany Peel Powder-Polyester Composites for Sustainable Automotive Interior Panels: Effects of Filler Content on Mechanical and Thermal Properties [Volume 13, Issue 2, 2026, Pages 439-450]
W.A.W., Rafizah Green Anticorrosion Coating with Low VOCs Emission using Moringa Oleifera Leaves Extract [Volume 9, Issue 1, 2022, Pages 163-171]
Widianti, Widianti Enhancing the Performance of High-Loaded Coconut Shell Biocomposites with NaOH Treatment [(Articles in Press)]
W.M.K.W.M., Ikhmal Green Anticorrosion Coating with Low VOCs Emission using Moringa Oleifera Leaves Extract [Volume 9, Issue 1, 2022, Pages 163-171]
W.N.W.M., Norsani Green Anticorrosion Coating with Low VOCs Emission using Moringa Oleifera Leaves Extract [Volume 9, Issue 1, 2022, Pages 163-171]
Wungsumpow, Chalermpon Enhancement of Compressive Strength in Cement Admixed Bangkok Clay with Glass Fiber and Bottom Ash for Eco-Friendly Functional Road Materials [Volume 12, Special Issue 2: Mechanics of Advanced Fiber-Reinforced Composite Structures, 2025, Pages 279-292]
Y
Yadav, Jitendra Thermo-Mechanical and Wear Properties of Natural Fiber-Reinforced Epoxy Composites for Structural Applications [Volume 12, Issue 1, 2025, Pages 141-152]
Yadav, Jitendra Comparative Investigation of Epoxy-terminated and Carboxyl-terminated Butadiene Nitrile Rubber for Toughened Epoxy Resins [Volume 14, Issue 1, 2027, Pages 99-122]
Yakoubi, Hadja Modeling Aeroelastic Vibration Dampening in Wind Turbine Blades using Piezoelectric Materials [Volume 12, Issue 3, 2025, Pages 685-694]
Yang, Yo-Lun Thrust Force and Delamination Analysis on Redmud-Filled Coconut Sheath Fiber Polyester Composite [Volume 12, Issue 1, 2025, Pages 43-52]
Yas, Mohammad Hossein Dynamic and Buckling Analysis of Hybrid Composite Beam Strengthened with Carbon Fibers/Aramid Fibers under Temperature Gradient [Volume 11, Issue 1, 2024, Pages 203-216]
Yas, Mohammad Hossein Study on Thermal, Mechanical and Dynamic Properties of Epoxy Matrix with Hybrid of Nanoclay/Carbon Nanotube [Volume 13, Issue 1, 2026, Pages 37-56]
Younesi, Adel Damage Detection in Concrete Filled Tube Columns Based on Experimental Modal Data and Wavelet Technique [Volume 7, Issue 2, 2020, Pages 245-254]
Yousefi, Ali-Akbar On the Study of Mechanical Properties of Aluminum/Nano-Alumina Composites Produced via Powder Injection Molding [Volume 3, Issue 1, 2016, Pages 45-51]
Yousefi, Peyman High-order Analysis of Linear Vibrations of a ModeratleyThick Sandwich Panel With an Electrorheological Core [Volume 7, Issue 2, 2020, Pages 177-188]
Yousefi, Shahram Thermoelastic Analysis of Compressor Spool in Turbojet Engine and Redesign it Using Functionally Graded Materials with Opti-mal Coefficients [Volume 6, Issue 2, 2019, Pages 167-179]
Yousefpoar, Mardali Synthesis and Characterization of Polymer/Nanosilicagel Nano-composites [Volume 4, Issue 1, 2017, Pages 1-8]
Z
Zahedan, Nima Experimental and Numerical Investigation on the Flexural Behavior of Composite-Reinforced Top-Hat Shape Beam [Volume 8, Issue 1, 2021, Pages 149-156]
Zaim, Abelnour Experimental and Numerical Analyses of Alfa/Polyester Composite Under Three-Point Bending [Volume 12, Issue 1, 2025, Pages 211-222]
Zamani, Jamal Experimental Study of Buckling of Reinforced Conical Composite Shell Under Hydrostatic Loading [Volume 9, Issue 2, 2022, Pages 359-366]
Zamani, Mohammad Reza Theoretical, numerical, and experimental analyses of free vibrations of glass fiber reinforced polymer plates with central cutouts and free boundaries [Volume 5, Issue 1, 2018, Pages 67-74]
Zamani, Mohammad Reza Thermal Buckling and Thermal Induced free Vibration Analysis of Perforated Composite Plates: a Mathematical Model [Volume 7, Issue 1, 2020, Pages 15-23]
Zamani, MohammadReza Tensile Strength Prediction of Glass/Epoxy Composite Structures Using Machine Learning and Response Surface Methodology [(Articles in Press)]
Zamani, M.R. Free Vibration of Lattice Cylindrical Composite Shell Reinforced with Carbon Nano-tubes [Volume 2, Issue 1, 2015, Pages 61-72]
Zamani, M.R. The Effect of External Skin on Buckling Strength of Composite Lattice Cylinders Based on Numerical and Experimental Analysis [Volume 3, Issue 2, 2016, Pages 83-87]
Zannat, M. An Experimental and Numerical Approach of Polymer Composites Based on Jute-Bamboo Natural Fiber [Volume 9, Issue 1, 2022, Pages 105-113]
Zarei, Hamidreza Design and Experimental/Numerical Analysis of Metal-Composite Vessel with Spherical Cap under Internal Pressure [Volume 10, Issue 2, 2023, Pages 247-256]
Zeighami, Vahid Buckling Analysis of Nano Composite Plates Based on Combination of the Incremental Load Technique and Dynamic Relaxation Method [Volume 8, Issue 1, 2021, Pages 133-148]
Zeighami Salimabad, Mehdi Numerical Optimization of Non-destructive Ultrasonic Testing in Identifying Defects in Composite Structure of Pine Tree Trunk [Volume 11, Issue 1, 2024, Pages 249-258]
Ziadan, K. M. The Effect of the Solvents on Electrical Properties of POT Conducting Polymer [Volume 8, Issue 2, 2021, Pages 283-289]
Zobeid, Sadegh Investigation of Free Vibration in Fluid-Loaded Cylindrical Shells with a Three-Layer Sandwich Wall and an Auxetic Central Layer [Volume 12, Issue 1, 2025, Pages 53-72]
